Academic Intelligence · Curated Daily

探索全球前沿学术脉络

AcademicHub 汇聚顶级期刊与预印本平台的实时文献。定制您的专属科研雷达,利用大语言模型自动生成交叉领域文献分析简报。

01.
arXiv (CS.CL) 2026-06-11

ResearchClawBench: A Benchmark for End-to-End Autonomous Scientific Research

AI coding agents are increasingly used for scientific work, but their end-to-end autonomous research capability remains difficult to verify. We present ResearchClawBench, a benchmark for evaluating autonomous scientific research across 40 tasks from 10 scientific domains. Each task is grounded in a real published paper, provides related literature and raw data, and hides the target paper during evaluation. Expert-curated multimodal rubrics decompose the target scientific artifacts into weighted criteria, enabling evaluation of target-paper-level re-discovery while leaving room for new discovery. We evaluate seven autonomous research (auto-research) agents under a unified protocol and seventeen native LLMs through the lightweight ResearchHarness. Current systems remain far from reliable re-discovery: the strongest autonomous agent, Claude Code, averages 21.5, and the strongest ResearchHarness LLM, Claude-Opus-4.7, averages 20.7, with an LLM frontier mean of only 26.5. Error analysis shows that failures concentrate in experimental protocol mismatch, evidence mismatch, and missing scientific core. ResearchClawBench provides a reproducible evaluation frontier for measuring progress toward autonomous scientific research.

02.
arXiv (CS.AI) 2026-06-15

An interpretable unsupervised representation learning for high precision measurement in particle physics

arXiv:2511.22246v2 Announce Type: replace-cross Abstract: Unsupervised learning has been widely applied to various tasks in particle physics. However, existing models lack precise control over their learned representations, limiting physical interpretability and hindering their use for accurate measurements. We propose the Histogram AutoEncoder (HistoAE), an unsupervised representation learning network featuring a custom histogram-based loss that enforces a physically structured latent space. Applied to silicon microstrip detectors, HistoAE learns an interpretable two-dimensional latent space corresponding to the particle's charge and impact position. After simple post-processing, it achieves a charge resolution of $0.25\,e$ and a position resolution of $3\,\mu\mathrm{m}$ on beam-test data, comparable to the conventional approach. These results demonstrate that unsupervised deep learning models can enable physically meaningful and quantitatively precise measurements. Moreover, the generative capacity of HistoAE enables straightforward extensions to fast detector simulations.

03.
bioRxiv (Bioinfo) 2026-06-14

Systematic AI-Driven Drug Repurposing via Clinical Trial Data Mining: A Framework and Six Cross-Therapeutic Case Studies.

作者:

Drug repurposing, the application of approved or shelved compounds to new therapeutic indications, offers a cost- and time-efficient alternative to de novo drug discovery. However, the systematic identification of repurposing candidates from the rapidly expanding body of clinical trial data remains a significant challenge. Here we present a publicly accessible AI-powered tool that mines the ClinicalTrials.gov registry to identify approved drugs with under-explored therapeutic potential in high-value disease areas. The tool integrates natural language processing, mechanism-of-action pathway analysis, and trial density scoring to surface candidates where biological plausibility is high and clinical trial coverage is sparse. We demonstrate the tool's utility across six cross-therapeutic case studies spanning oncology, cardiology, neurology, rare diseases, immunology, and infectious disease. Key findings include: the identification of Zonisamide as an under-explored combination candidate for obesity alongside GLP-1 receptor agonists; mechanistic validation of SGLT2 inhibitors in heart failure with preserved ejection fraction (HFpEF); and a novel cross-domain mapping of anti-TNF biologics to early-stage neurodegeneration via shared neuroinflammatory pathways. The tool is freely accessible and designed to lower the barrier for academic and industry researchers to systematically pursue repurposing opportunities.

04.
arXiv (CS.AI) 2026-06-16

RIDGECUT: Learning Graph Partitioning with Rings and Wedges

arXiv:2505.13986v4 Announce Type: replace-cross Abstract: Reinforcement learning (RL) has shown promise for combinatorial optimization problems on graphs by learning heuristics that generalize across instances. However, effectively incorporating domain knowledge into RL frameworks for graph partitioning remains challenging, as existing approaches typically rely on unconstrained node-level actions that lead to large action spaces and inefficient exploration. In this paper, we propose RidgeCut, an RL framework that constrains the action space to enforce structure-aware partitioning in the Normalized Cut problem. Using transportation networks as a motivating example, we introduce a novel concept that leverages domain knowledge about urban road topology – where natural partitions often take the form of concentric rings and radial wedges. By transforming the graph into linear or circular representations, our method enables the use of transformer-based policies and efficient learning via Proximal Policy Optimization. The resulting partitions from RidgeCut are not only aligned with expected spatial layouts but also achieve lower normalized cuts compared to existing methods. Experimental results on synthetic and real-world traffic graphs demonstrate that RidgeCut consistently outperforms existing methods while exhibiting strong inductive generalization across graph sizes. Although motivated by road networks, RidgeCut provides a general mechanism for embedding structural priors into RL frameworks for graph partitioning.

05.
arXiv (CS.LG) 2026-06-15

Free Heavy-Tailed Lunch for Muon: A Theoretical Justification of Empirical Success

arXiv:2606.14560v1 Announce Type: cross Abstract: Non-Euclidean optimisation methods with matrix-valued updates, such as Muon and Scion, have recently shown strong empirical performance for training Transformer models, yet their theoretical advantages over Euclidean methods remain poorly understood. We address this gap in the heavy-tailed non-convex regime, where stochastic gradients have bounded $p$-th central moments, $p \in (1,2]$. We show that certain non-Euclidean methods achieve optimal sample complexity under stronger stationarity measures, while Euclidean methods incur additional dimension-dependent costs. As a consequence, for $m \times n$ matrices, Muon finds an $\varepsilon$-stationary point in nuclear norm within $\mathcal{O}\left(\min\{m, n\} \frac{\Delta_1 L}{\varepsilon^2} \left(\frac \sigma \varepsilon \right)^{\frac p {p-1}}\right)$ samples, absorbing heavy-tailed noise without extra dimension dependence, unlike Euclidean methods. We further prove this sample complexity, including its dimension dependence, is optimal for all first-order methods under nuclear-norm stationarity. Experiments on large language models support our theory. Surprisingly, our results suggest that other Schatten geometries beyond the spectral geometry of Muon can perform competitively in certain settings.

06.
arXiv (CS.CV) 2026-06-12

Perceive, Interact, Reason: Building Tool-Augmented Visual Agents for Spatial Reasoning

While recent vision-language models (VLMs) demonstrate strong multimodal understanding, they remain limited in spatial reasoning tasks that require active evidence acquisition and multi-step visual interaction. This limitation suggests that relying solely on implicit visual representations from vision encoders is insufficient for recovering fine-grained spatial evidence. We introduce PERception-Interaction-reason Agent (PERIA), a tool-augmented visual agent for spatial reasoning tasks across map reasoning, visual probing, and vision reconstruction. PERIA uses two lightweight tool families: vision perception tools for exposing textual, symbolic, and spatial evidence, and vision interaction tools for manipulating visual context, tracing paths, and verifying spatial relations. To train PERIA, we develop a unified recipe that combines supervised tool-use trajectory synthesis, composite rewards, and Observation-Relaxed Group-in-Group Policy Optimization (OR-GIGPO) for effective multi-tool behavior. Experiments on 13 benchmarks from 8 datasets show that PERIA-8B improves over the Qwen3-8B backbone by 10.0% on in-distribution benchmarks and 4.4% on out-of-distribution benchmarks, while outperforming previous state-of-the-art baselines of similar size by 7.0%-14.8%. It also achieves performance comparable to much larger models such as Qwen3-VL-235B-A22B-Thinking and GPT-5, demonstrating the effectiveness of PERIA in enhancing spatial reasoning capabilities.

07.
arXiv (CS.CL) 2026-06-16

Evaluative Judgement in Teaching AI-based Translation: A Class-room Case Study of AI-Mediated Translation and Post-Editing

作者:

Drawing on 23 anonymized student pro-jects from a fourth-year Machine Transla-tion and Post-editing course in a BA-level translation programme, this paper exam-ines how structured comparison of gen-eral-purpose LLMs and online MT sys-tems can elicit evaluative judgement in AI-mediated translation. Students translat-ed short specialised English Wikipedia texts into Catalan or Spanish, generated four system outputs, evaluated them using automatic metrics and human adequa-cy/fluency assessment, selected one output for post-editing, and justified their deci-sion in written reports. Descriptive counts are reported for all 23 projects, while qualitative interpretation is based on the 22 cases accompanied by written reports. Results show that students did not treat automatic metrics as final authority: final post-editing selections often diverged from metric rankings and were justified through adequacy, fluency, terminology, naturalness, and expected post-editing ef-fort. The study therefore does not bench-mark systems under controlled conditions; it analyses how students justified system choice within an authentic classroom as-signment.

08.
arXiv (CS.AI) 2026-06-16

Action with Visual Primitives

arXiv:2605.22183v3 Announce Type: replace-cross Abstract: Vision-Language-Action (VLA) models have emerged as a promising paradigm for generalist robotic manipulation. A common design in current architectures maps language instructions and visual observations to actions in a single forward pass. While conceptually simple, this formulation entangles instruction comprehension, spatial scene understanding, and motor control within a single learning objective. As a result, the action expert must implicitly relearn cognitive and perceptual capabilities already present in the pretrained VLM, which can limit both learning efficiency and generalization. We introduce AVP (Action with Visual Primitives), an end-to-end architecture that implements this visual-primitive-centric interface: the VLM infers the next-stage target and emits visual-primitive tokens that condition a flow-matching action expert, with supervision derived from end-effector kinematics. Real-robot experiments on general pick-and-place tasks show that AVP improves the success rate by 37.04% over pi_0.5 and outperforms other recent methods, with consistent gains in data efficiency, spatial-compositional generalization, and object-level transfer.

09.
medRxiv (Medicine) 2026-06-10

Optimisation of steatotic liver disease screening algorithm for resource-poor settings using machine learning

Background The European Association for the Study of the Liver (ESAL) - Steatotic Liver Disease (SLD) screening algorithm involves two steps; initial screening with FIB-4 followed by referral for vibration-controlled transient elastography (VCTE) in patients likely to have significant fibrosis (SF). However, VCTE is not widely available in resource-limited settings. Aim To optimise the EASL SLD screening algorithm for resource-poor settings using machine learning (ML). Methods We analysed data from 964 adults aged [≥]35 years who underwent VCTE at a tertiary referral centre in Sri Lanka between November 2024 and 2025. Multiple ML models using different methods and variable combinations were trained on 80% of the dataset and tested on the remaining 20%. Best models were selected based on performance and externally validated using data from 430 patients who underwent VCTE before November 2024. Model performance was compared with the FIB-4 using confusion matrices. Results A Random Forest model incorporating age, AST, ALT, and platelet count separately, rather than using FIB-4, outperformed. The all-variable ML model showed the best predictive performance for SF, with accuracy of 77.2%, recall of 0.762, precision of 0.778, and AUC-ROC of 0.818. The variables used in the model, in descending order of feature importance, were AST, platelet count, BMI, ALT, age, diabetes mellitus, hypertension, dyslipidaemia, sex, family history, hypothyroidism, diabetes complication and smoking. External validation demonstrated 75.1% accuracy and an AUC of 0.779. When used as the first step of the SLD screening algorithm, the all-variable ML model identified 37 (17.1%) additional true positives and reduced false-negative diagnoses by 50% compared with FIB-4. Conclusions ML-based models were more effective than the FIB-4 score as the first-line screening tool for VCTE referral, substantially improving the identification of patients with significant fibrosis in this South Asian cohort.

10.
arXiv (quant-ph) 2026-06-15

Tantalum as a base material for superconducting integrated circuits

arXiv:2606.13750v1 Announce Type: new Abstract: The performance of superconducting integrated circuits for quantum applications is fundamentally limited by material-related losses. Tantalum, as an emerging material for next-generation quantum circuits, has attracted considerable attention in recent years after demonstrating breakthrough performance in both superconducting microwave resonators and qubits. Concurrently, a growing body of work is devoted to the operation of tantalum-based circuits and related fabrication techniques. This interest is further stimulated by tantalum thin films polymorphism resulting in a variety of its crystalline structure, superconducting properties, coherence, etc. Furthermore, tantalum circuits exhibit distinctive features in cryogenic experiments, which have not been observed in aluminum- or niobium-based ones. In this review, we summarize the recent research of tantalum thin films growth and phase selection mechanisms on various substrates, key aspects of fabrication and performance of superconducting circuit, including a material first-principles theoretical study. In conclusion, we address a number of open issues, including the role of \b{eta}-phase impurities, the effect of hydrofluoric acid solutions on chain characteristics, and the anomalous behavior of {\alpha}-tantalum chains at cryogenic temperatures.

11.
arXiv (CS.CV) 2026-06-11

Feature extraction for plant growth estimation

Precision agriculture requires the estimation of plant growth stages in real-time. When the plant growth stage is known, the wastage of resources in cultivation, such as nutrients and water, is reduced as only the required resources need to be supplied. Plants at different growth stages, however, have similar morphological features, which can make autonomous growth stage estimation difficult. This paper presents two feature extraction methods for growth stage estimation: one that uses a bank of Gabor filters and morphological operations, and the other that uses pre-trained convolutional neural networks (CNNs) and transfer learning. We test these methods on a publicly available plant growth stage dataset (``bccr-segset``) for two species, canola and radish, grown and captured under indoor conditions. The two proposed feature extraction methods are compared, using support vector machines and boosted trees as classifiers. We find that both methods are suitable for real-time applications, and that CNN features outperform the hand-crafted features, both with regard to speed and accuracy. The best system (VGG-19 features, classified with a radial basis function support vector machine) obtained an accuracy of 98.4% for both species, processing an image in 0.08 seconds.

12.
arXiv (CS.CL) 2026-06-16

SkillsVote: Lifecycle Governance of Agent Skills from Collection, Recommendation to Evolution

Long-horizon LLM agents generate traces that could become reusable experience, but raw trajectories are noisy, local, and hard to govern. Agent Skills offer a structured artifact for combining procedural guidance, executable resources, and applicability boundaries. Yet open skill ecosystems contain redundant, uneven, environment-sensitive artifacts, and indiscriminate updates can pollute future context. We present SkillsVote, a lifecycle-governance framework for Agent Skills across collection, recommendation, attribution, and evolution. SkillsVote profiles a million-scale open source corpus for environment requirements, quality, and verifiability, and synthesizes tasks for verifiable skills. Before execution, it performs agentic library search over structured skill folders to expose instructional context. After execution, it decomposes trajectories into skill-linked subtasks, attributes outcomes to skill-guided execution, agent exploration, environment, and result signals, and admits only successful reusable discoveries to evidence-gated updates. Experiments on Terminal-Bench 2.0 and SWE-Bench Pro show that SkillsVote improves agent performance on challenging agentic coding benchmarks. The gains arise from two complementary pathways: online evolution over task streams at test time and offline transfer via frozen libraries built from either historical trajectories or curated open source skills.

13.
bioRxiv (Bioinfo) 2026-06-16

DMcloud: Macromolecular Structure Modeling Using Local Structure Fitting for Medium to Low Resolution cryo-EM maps

Cryogenic electron microscopy (cryo-EM) has become an essential experimental approach in structural biology for determining macromolecular structures. When the resolution of a cryo-EM map is worse than approximately 5[A], fitting known or predicted molecular models into the map becomes a common strategy for interpretation. However, accurately fitting biomolecular models into cryo-EM maps, particularly for large macromolecular complexes, remains challenging when the input structure models contain errors or are in a conformation different from that represented in the map. Here, we present DMcloud, a method for local structure fitting of proteins and nucleic acids in cryo-EM maps. Instead of forcing an entire input model into the map, DMcloud divides input structures into local regions, identifies regions that are supported by the density, removes unsupported regions, and assembles the retained regions into a final model. We benchmarked DMcloud on 176 cryo-EM maps, including intermediate and high-resolution maps that include proteins, DNAs, or RNAs. For EM maps in the 5.0-10.0 [A] and 2.5-5.0 [A] resolution ranges, DMcloud achieved average sequence modeling coverage of 0.49 and 0.70, respectively. For DNA/RNA maps, DMcloud achieved an average sequence coverage of 0.75. Across all datasets, DMcloud consistently outperformed existing methods in model accuracy, map-model correlation, and modeling coverage.

14.
arXiv (CS.AI) 2026-06-16

Leveraging Deep Learning for Object and Position Recognition of Load Carriers for Autonomous Logistics Vehicles

arXiv:2606.16042v1 Announce Type: cross Abstract: This work explores the use of artificial intelligence in mobile robotics to achieve autonomous detection and pose estimation of load carriers for automated pickup. A deep neural network is designed to recognize predefined landmarks on the carrier from RGBD data; these landmarks are then used to compute the carrier's pose. The network operates directly on RGBD images to estimate landmark positions, which form the basis for determining the carrier's location. The approach is validated in extensive experiments and comprises both software and hardware implementations. A deep learning-based framework is presented to detect load carriers and estimate their pose for use with autonomous logistics vehicles. Our method uses a convolutional neural network to identify characteristic reference points on the carrier from RGBD input and computes its pose by combining these inferred landmarks with prior geometric knowledge. Experiments show that the resulting accuracy is sufficient for reliable load carrier detection in industrial environments, confirming the suitability of the method for autonomous intralogistics applications.

15.
arXiv (CS.CV) 2026-06-12

Measurement-Calibrated Multi-Camera Fusion for Vision-Based Indoor Localization

Indoor vision-based localization systems are affected by detection noise, occlusions, and limited camera coverage, leading to uncertainty at multiple stages of the pipeline. While multi-camera data fusion is widely used to mitigate these issues, it is typically treated as a black-box component and evaluated solely end-to-end, obscuring its mechanistic contributions. To address this gap, this work investigates whether explicitly characterizing single-camera localization errors can be leveraged to calibrate and optimize multi-camera data fusion. We introduce a measurement-calibrated fusion approach that integrates component-wise error quantification, specifically isolating homography calibration, human detection, and motion tracking. A component-wise evaluation is conducted to quantify error contributions from homography calibration, human detection, and motion tracking. Experimental results show that data fusion improves localization accuracy compared to single-camera baselines. While measurement-calibrated fusion provides only limited improvement in absolute accuracy over standard fusion, it substantially reduces trajectory variance and improves motion smoothness, which are critical for applications requiring stable and continuous motion estimates. These results highlight the value of explicit error characterization when designing data fusion strategies for vision-based indoor positioning systems.

16.
arXiv (CS.CV) 2026-06-15

MooMIns – Monocular 3D Reconstruction and Object Pose Estimation from Multiple Instances

Simultaneous 3D reconstruction and 6D object pose estimation from a single monocular image is an inherently ill-posed problem. In industrial settings, however, multiple instances of an object are often randomly arranged in bins, implicitly providing several views of the same object within a single image. We show that this implicit multi-view geometry can be exploited to simultaneously reconstruct the object in 3D and estimate the 6D pose of each visible object instance. We present MooMIns, a new Gaussian-splatting-based approach that inverts the original Gaussian splatting formulation: instead of rendering a single scene from multiple cameras, we render multiple object instances from a single camera. Our method is initialized with SAM3 instance segmentation masks and a modified Structure from Motion (SfM) pipeline. In contrast to learned monocular depth estimation, we perform true geometry-based reconstruction from image evidence, avoiding hallucinations caused by training data priors. We evaluate MooMIns on synthetic and real bin-picking scenarios, and demonstrate accurate reconstruction of previously unseen objects as well as reliable pose estimation of individual instance

17.
arXiv (CS.CL) 2026-06-11

One Jailbreak, Many Tongues: Learning Language-Insensitive Intention Representations for Multilingual Jailbreak Detection

Large language models (LLMs) are increasingly deployed in applications for global multilingual users, yet safety training remains concentrated in dominant languages and has not progressed in parallel with multilingual capability, creating exploitable gaps for jailbreak attacks. Current jailbreak defenses are largely developed and evaluated in dominant languages, and their effectiveness is limited by the scarcity of aligned multilingual supervision and representations dispersion caused by language variation. To address this issue, we propose MLJailDe, a multilingual jailbreak detection framework designed to improve both multilingual robustness and cross-lingual generalization. MLJailDe first introduces a multilingual back-translation data augmentation algorithm to construct a semantically consistent and functionally effective dataset spanning 11 languages, consisting of 2,232 benign and 1,239 jailbreak samples. On this basis, MLJailDe employs relative-distance constraints to reduce cross-lingual representation dispersion and encourage jailbreak prompts with similar intent to form consistent clusters across languages, while an imbalance-aware classification objective is further used to alleviate class imbalance and learn more reliable multilingual decision boundaries. Experimental results show that MLJailDe outperforms state-of-the-art baselines across multiple languages, achieving an F1 score of 98.5\%, and obtains an average F1 score of 97.1\% on unseen languages, demonstrating strong effectiveness and cross-lingual generalization.

18.
arXiv (CS.AI) 2026-06-11

Reliability-Calibrated Edge-IoT Early Fault Warning for Rotating Machinery with a Physics-Guided Tiny-Mamba Transformer

arXiv:2601.21293v3 Announce Type: replace-cross Abstract: Industrial Internet of Things (IIoT) systems increasingly rely on distributed vibration sensing to support predictive maintenance of rotating machinery. In practical deployments, however, raw signal upload is costly and alarm decisions must be made locally under limited computation, changing operating conditions, and strict nuisance-alarm budgets. This paper presents a reliability-calibrated edge-IoT early-warning framework, in which a compact Physics-Guided Tiny-Mamba Transformer (PG-TMT) acts as the representation module and an extreme value theory (EVT) layer converts streaming anomaly scores into event-level alarm episodes. PG-TMT combines a depthwise-separable convolutional stem, a Tiny-Mamba state-space branch, and a lightweight local Transformer to capture transient, long-horizon, and multichannel degradation cues under batch-size-one inference. To improve auditability, temporal attention is projected to the frequency domain and softly aligned with analytical bearing fault-order bands. EVT calibration, dual-threshold hysteresis, and trimmed-tail fitting provide controllable false-alarm intensity even when healthy calibration data are imperfect. Experiments on CWRU, Paderborn, XJTU-SY, and an industrial pilot demonstrate that the proposed framework improves PR-AUC, reduces detection delay under a controlled nuisance-alarm budget, and remains robust to structured interference, metadata uncertainty, compound fault mixtures, and domain transfer. With a sub-1 MB footprint and Jetson p99 latency below 7 ms, the framework supports calibrated and interpretable early warnings for IIoT predictive maintenance.

19.
arXiv (CS.AI) 2026-06-12

ARMOR-MAD: Adaptive Routing for Heterogeneous Multi-Agent Debate in Large Language Model Reasoning

arXiv:2606.13197v1 Announce Type: new Abstract: Multi-agent debate (MAD) can improve large language model reasoning, but fixed debate pipelines often waste computation and can amplify correlated errors among similar agents. We propose ARMOR-MAD, a training-free heterogeneous MAD framework that treats debate as conditional computation. ARMOR-MAD combines three components: Pre-debate Agreement Routing (PAR) decides whether independently generated Round-0 answers require debate; Early Agreement Stopping Evaluator (EASE) stops debate after convergence; and Semantic Outlier Detection (SOD) down-weights abnormal final answers during aggregation. Across MATH Level 5, GSM8K, MMLU, and MMLU-Pro, ARMOR-MAD consistently improves over fixed-round heterogeneous debate with the same model pool, reaching 65.5\%, 96.5\%, 90.0\%, and 81.5\% accuracy, respectively. The results suggest that genuine model heterogeneity and agreement-based control are both important for making MAD more accurate and efficient.

20.
arXiv (CS.LG) 2026-06-16

Enhancing Physics-Informed Neural Networks Through Feature Engineering

arXiv:2502.07209v4 Announce Type: replace Abstract: Physics-Informed Neural Networks (PINNs) seek to solve partial differential equations (PDEs) with deep learning. Mainstream approaches that deploy fully-connected multi-layer deep learning architectures require prolonged training to achieve even moderate accuracy, while recent work on feature engineering allows higher accuracy and faster convergence. This paper introduces SAFE-NET, a Single-layered Adaptive Feature Engineering NETwork that achieves orders-of-magnitude lower errors with far fewer parameters than baseline feature engineering methods. SAFE-NET returns to basic ideas in machine learning, using Fourier features, a simplified single hidden layer network architecture, and an effective optimizer that improves the conditioning of the PINN optimization problem. Numerical results show that SAFE-NET converges faster and typically outperforms deeper networks and more complex architectures. It consistently uses fewer parameters – on average, 65% fewer than the competing feature engineering methods – while achieving comparable accuracy in less than 30% of the training epochs. Moreover, each SAFE-NET epoch is 95% faster than those of competing feature engineering approaches. These findings challenge the prevailing belief that modern PINNs effectively learn features in these scientific applications and highlight the efficiency gains possible through feature engineering.

21.
arXiv (CS.CL) 2026-06-12

Agent-based models for the evolution of morphological alternation patterns

Why is the past of English "go" the apparently unrelated "went"? Such alternations are frequent in languages. They neither aid communication nor learnability, yet they can be persistent, surviving over centuries or millennia. We present a multi-agent simulation of the emergence of morphological stem and inflection alternations. Alternate forms arise by phonological changes or, as with "go/went", from lexical alternatives associated with a subset of the population. When an agent 'hears' another agent use a novel form for a slot in the paradigm of a word (say, the past tense of go), they will with some probability adopt that form, possibly spreading its use to other slots in the paradigm that shared the same original form. Thus alternative forms can spread through the population and become entrenched as stem or inflectional marker alternants. Unlike many previous computational studies, our system allows for naturalistic lexical forms, realistic phonological rules, lexicons with hundreds or thousands of entries, and agent populations in the tens or hundreds. It supports several network topologies, diffusion patterns and agent adoption policies. One issue with such simulations is evaluation: how realistic is the resulting morphology compared to those of real languages? We introduce the AI Historical Linguist, a novel Large Language Model-driven system that models a debate between two historical linguists. We use this to compare a set of real language morphologies, disguised morphologies, and experimentally evolved morphologies. The results suggest that among the factors that favor more plausible morphologies are scale-free social networks and random Bernoulli adoption of forms. We also present three case studies modeling attested historical changes, allowing us to test what might have happened if history had been different. All code and data are released.

22.
arXiv (CS.LG) 2026-06-16

Learning the Geometry of Data: A Mathematical Review of Shape Space Analysis

arXiv:2606.17022v1 Announce Type: cross Abstract: A central objective of machine learning is to identify structure and patterns in data. Advances in data acquisition have increasingly produced datasets whose observations possess rich geometric form, giving rise to shape spaces that encode variability in object geometry. Such datasets arise across a wide range of disciplines, including biology, medicine, anthropology, and computer vision, where subtle geometric differences often carry important scientific information. Traditional machine learning methods, however, are frequently ill-equipped to account for the nonlinear geometric structure underlying these data. This survey synthesizes a rapidly growing body of work on shape space analysis, which provides a mathematical and computational framework for the study of geometric data. Drawing on ideas from differential geometry, statistics, and machine learning, we organize the literature around a common analytical pipeline: shape representation and parameterization, the rigorous construction of robust geodesic metrics, statistical analysis on shape spaces, and geometry-aware learning methods. We discuss how these tools enable the characterization of shape variability, the comparison of geometric objects, and the analysis of structural trajectories across populations and time. To illustrate the breadth of the field, we highlight applications spanning multiple scales of biological organization, including studies of subcellular morphology and primate tooth evolution. Across these and many other domains, researchers face common challenges arising from complex, nonlinear, and often unaligned geometric variation. The review concludes by identifying key theoretical and computational challenges, as well as emerging opportunities driven by increasingly large and diverse geometric datasets.

23.
arXiv (CS.LG) 2026-06-19

SEAGAN: domain-Specific and Edge-Aware Graph Attention Network for Dynamic Plant Processes

arXiv:2606.19623v1 Announce Type: new Abstract: Graph neural networks (GNNs) provide a flexible framework for learning from scientific data linked through physical, biological, or functional relationships. One promising domain is plant physiology, where measured responses often arise from multiple interacting processes whose exact separation remains difficult even with manual intervention. In plant physiology, a key example is the A-Ci curve, which relates net CO2 assimilation rate (Anet) to leaf intercellular CO2 concentration (Ci) and is used to estimate photosynthetic parameters in leaf and crop-canopy models. However, reliable estimation requires identifying the active biochemical limitation state at each curve point, which remains a major source of uncertainty. Here, we formulate limitation-state identification along A-Ci curves as a graph-based node classification problem, with curve points as nodes. Domain-specific graph representations are created using distance-based k-nearest-neighbor (kNN) and auxiliary-signal-guided (ASG) connectivity, with edge attributes encoding pairwise relations. The framework was evaluated against conventional learning baselines, graph-based architectures, and an automated fitting-based benchmark. Results on a large synthetic dataset with known ground-truth limitation states show that graph-based models improve classification, particularly near biochemical transition regions. The best-performing configuration, SEAGAN (domain-Specific and Edge-Aware Graph Attention Network for Dynamic Plant Processes), integrates process-aware node features, edge attributes, kNN connectivity, and graph attention with weighted cross-entropy loss, achieving an F1-score of 0.857 and an accuracy of 0.882. The results show that representing A-Ci curves as graphs improves biochemical limitation-state analysis, with edge-aware attention over local kNN neighborhoods providing the most effective strategy.

24.
arXiv (CS.LG) 2026-06-18

Giskard : Byzantine Robust and Confidential Aggregation for Large-Scale Decentralized Learning

arXiv:2606.19129v1 Announce Type: cross Abstract: Dealing simultaneously with confidentiality and Byzantine behaviors in decentralized learning is a challenging problem. Indeed, in decentralized learning, clients train a machine learning model while keeping their data locally and share their model parameters or gradients with a set of neighbors. While enforcing confidentiality calls for hiding the exchanged model parameters/gradients (e.g., by using cryptographic techniques), dealing with Byzantine contributions often requires inspecting the latter. Hence, most research works address these objectives separately. A recent line of work proposes to employ secure multi-party computation (MPC) to implement robust aggregators against model poisoning, thereby enforcing both confidentiality and Byzantine resilience. However, these solutions scale badly: they either require all-to-all communication between participants or delegate the entire computation to a small subset, whose computational and communication load grows proportionally with the size of the network. In this paper, we present Giskard, a protocol for confidential and Byzantine-robust decentralized aggregation. Giskard organizes $n$ parties into a tree of committees of size $O(\log n)$ and evaluates a coordinate-wise approximate median via a committee-adapted distributed binary search over the value domain, using BGW-style MPC within each committee. We assess Giskard both theoretically by proving its security and confidentiality properties and experimentally through extensive experiments involving up to one million participants. Compared to its closest competitors, Giskard reduces per-party communication complexity asymptotically while exhibiting comparable model utility under up to $n/4$ Byzantine parties.

25.
bioRxiv (Bioinfo) 2026-06-17

Posterior-calibrated multimodal motor states reveal longitudinal and imaging-associated heterogeneity in Parkinson's disease

Parkinson's disease (PD) motor heterogeneity is commonly summarized by hard subtype labels, although clinical states vary longitudinally, severity can dominate unsupervised structure, and model uncertainty is rarely calibrated. We developed a posterior and refit-stability calibrated multimodal motor state framework that assigns probabilistic MDS-UPDRS-III motor states, aggregates them at the patient level, separates global burden from residual tremor-axial profile, and tests whether imaging can recover the resulting posterior distribution. In 29,366 aligned PPMI motor-posterior visits spanning 4,773 participant identifiers, patient-level state families were stable on average (modal-family fraction 0.925; 95% CI 0.921 - 0.930), but 25.5% of patients transitioned state over follow-up (95% CI 24.1 - 26.7%). PD-only cohort definitions produced smaller denominators and are reported as sensitivity cohorts with rerun calibration and imaging-posterior checks. Severity and covariates explained substantial motor-domain variance, especially bradykinesia (rsecond=0.850), but residual profile modeling retained five active components across total-severity, principal-component, leave-one-domain, non-target-burden, and clinical-only severity axes. Refit-stability calibration with 250 patient-blocked bootstrap refits showed high nominal posterior confidence (0.989) but lower empirical label consistency (0.849), quantifying overconfidence rather than hiding it. Patient-held-out temporal modeling predicted future axial burden (best XGBoost rsecond=0.605) and future state transition (XGBoost AUC=0.830; 95% CI 0.822 - 0.837). DaTSCAN plus FreeSurfer ROI features predicted patient-level soft motor posterior vectors (RF jsd=0.209; 95% CI 0.199 - 0.220; macro-AUROC=0.692), while severity/demographic-adjusted imaging features further improved soft posterior recovery (jsd=0.188). BioFIND transfer reproduced clinically meaningful endpoint gradients after state assignment in 225 external patients, supporting external face validity rather than definitive transportability. These results support PD motor phenotypic states as calibrated, dynamic, clinically interpretable profiles with convergent imaging associations, not as definitive biological subtypes.