Academic Intelligence · Curated Daily

Explore the Frontier of Global Academia

AcademicHub aggregates real-time literature from top journals and preprint platforms. Build your personal research radar and let large language models compile cross-disciplinary analysis briefings automatically.

01.
medRxiv (Medicine) 2026-06-10

Resolving Diagnostic Discordance in Group 2 Pulmonary Hypertension Through Staged Physiologic Testing: Insights From PVDOMICS

Background World Symposium on Pulmonary Hypertension (WSPH) Group 2 pulmonary hypertension (PH) is a clinically integrated phenotype attributed to left heart disease, whereas pre- versus post-capillary classification is operationalized primarily by pulmonary capillary wedge pressure (PCWP). Although current recommendations emphasize contextual interpretation and provocative testing for intermediate PCWP values, the relationship between PCWP-based classification and underlying phenotype has not been systematically evaluated. We aim to quantify phenotype-hemodynamic discordance across the PCWP spectrum and evaluate a staged physiology-guided framework incorporating inhaled nitric oxide (iNO), ventricular geometry, and provocative testing. Methods We studied 1,032 participants from the NHLBI-sponsored PVDOMICS cohort with multidisciplinary adjudicated phenotypes integrating clinical, imaging, physiologic, and hemodynamic data. Stage-specific PCWP thresholds classified pre- versus post-capillary physiology at rest, during iNO, and during provocation (fluid challenge or invasive cardiopulmonary exercise testing [iCPET]). Echocardiographic right ventricular-to-left ventricular (RV/LV) ratio was evaluated as a marker of ventricular interdependence. Restricted cubic spline and staged concordance analyses defined certainty-based PCWP ranges and incremental diagnostic yield. Results Adjudicated Group 2 phenotype was present in 37.0% of participants. Resting PCWP demonstrated good discrimination (AUC 0.86), but substantial bidirectional phenotype-hemodynamic discordance persisted across intermediate PCWP ranges. At a resting PCWP of 12 mmHg, 25% of participants classified as pre-capillary had adjudicated Group 2 PH, whereas at 18 mmHg, 35% classified as post-capillary remained discordant non-Group 2. Concordance did not approach 90% until PCWP values were 24 mmHg. Dynamic testing incrementally improved concordance within these overlap zones. Nearly half of adjudicated Group 2 PH participants (46.5%) were not identified by resting PCWP alone; incorporation of iNO and provocative testing increased cumulative Group 2 identification by 63.4% and improved sensitivity from 79.9% to 83.7%. Model discrimination improved from an AUC of 0.863 to 0.908 (likelihood-ratio P

02.
arXiv (CS.LG) 2026-06-15

Leave-One-Out-, Bootstrap- and Cross-Conformal Anomaly Detectors

arXiv:2402.16388v4 Announce Type: replace-cross Abstract: The need for uncertainty quantification in anomaly detection systems has become increasingly important. In this context, effectively controlling Type I error rates without inflating Type II error rates in these systems can build trust and reduce costs associated with false discoveries. The field of conformal anomaly detection emerges as a promising approach for providing respective statistical and finite-sample validity guarantees through model calibration. However, reliance on calibration data imposes practical limitations, especially in low-data regimes. In this work, we formally define and evaluate leave-one-out-, bootstrap-, and cross-conformal methods for conformal anomaly detection, building on methods from the field of conformal prediction. Looking beyond the classical split-conformal approach, we show that derived methods for calculating resampling-conformal $p$-values offer a practical compromise between the data efficiency of full-conformal (transductive) approaches and the computational efficiency of split-conformal (inductive) methods. We validate derived methods and quantify their improvements for a range of one-class classifiers and datasets.

03.
arXiv (CS.CV) 2026-06-15

IndustryBench-MIPU: Benchmarking Multi-Image Attribute Value Extraction for Industrial Products

Industrial products such as valves and circuit breakers are defined by dense technical specifications that govern procurement, compatibility, and safety across supply chains. These specifications are scattered across multiple heterogeneous product images, including specification tables, nameplates, and technical drawings, yet whether Multimodal Large Language Models (MLLMs) can reliably recover them remains underexplored. To fill this gap, we introduce IndustryBench-MIPU, the first large-scale benchmark for multi-image industrial product understanding, built around structured attribute extraction – recovering property-value pairs from product images. This task jointly probes text recognition on specification tables and nameplates, visual reasoning over technical drawings, domain knowledge to decode industrial terminology, and cross-image evidence integration to assemble scattered specifications. Concretely, the benchmark comprises 4,559 products across 27,652 images with 103,703 annotations spanning 18 industrial categories, constructed through multi-model consensus and three-tier quality assurance. Evaluating nine MLLMs under both single-image and product-level multi-image settings reveals a stark completeness gap: models achieve high precision (86–94%) but the best recovers only 49.9% of product-level attributes; moving from single-image to multi-image extraction costs 15–34 percentage points of recall. Multi-image completeness, not single-image accuracy, is the core bottleneck. Dataset and code are publicly available.

04.
medRxiv (Medicine) 2026-06-17

Investigating shared genetic overlap of immune-mediated inflammatory diseases and cardiometabolic diseases

Abstract Background: Immune-mediated inflammatory diseases (IMIDs) are associated with increased risk of cardiometabolic diseases. Investigating genetic overlap among these conditions can provide insights into their clinical management. Methods: Genetic correlation was assessed using linkage disequilibrium score regression (LDSC). Then, a meta-analysis was conducted using Association Analysis Based on SubSETs (ASSET) to pinpoint independent single nucleotide polymorphisms (SNPs) shared across the diseases. Each independent SNP was then used to define a genomic window (+/-500KB) for colocalisation analysis and Local Analysis of [co]Variant Association (LAVA) to offer multiple layers of regional pleiotropic evidence. Over-representation analysis was then run to identify enriched biological pathways, which then were used for drug target analysis. Results: The LDSC analysis showed a significant global genetic correlation for rheumatoid arthritis (RA) and cardiometabolic diseases including hypertension, coronary artery disease (CAD), heart failure (HF), stroke, atrial fibrillation (AF), and type two diabetes mellitus (T2DM) ranging from rg = 0.09 to 0.24. ASSET meta-analysis identified 164 independent SNPs shared across RA and the cardiometabolic diseases with P < 5 x 10- in the overall one-sided meta-analysis P-value, FDR < 0.05 in both individual GWASs, and TRUE phenotype matrix. Colocalisation analysis revealed multiple loci with strong evidence (Posterior probabilities [&ge;] 80) of single causal SNPs between the trait pairs. LAVA analysis was then used as an additional layer of confirmation for the findings generated by ASSET and colocalisation and thus several loci were highlighted. Over-representation analysis showed significant enriched immune-related pathways across RA-hypertension, RA-CAD, RA-AF, and RA-T2DM trait pairs. Drug target analysis highlighted several drugs which could be further tested for their effectiveness in RA and its common comorbidities. Conclusion: The findings revealed a shared genetic architecture and key immune-related biological pathways underlying RA and its associated cardiometabolic comorbidities. The identified genes and drugs provide opportunities for further therapeutic assessment which could improve clinical management strategies.

05.
arXiv (CS.AI) 2026-06-16

ToolMenuBench: Benchmarking Tool-Menu Filtering Strategies for Reliable and Efficient LLM Agents

arXiv:2606.15508v1 Announce Type: new Abstract: Tool-augmented large language model agents increasingly operate over large tool libraries, but existing evaluations often focus on whether a model can call a tool correctly rather than how the visible tool menu shapes reliability, efficiency, and safety-relevant risk exposure. We introduce ToolMenuBench, a benchmark for evaluating tool-menu construction in multi-step LLM agents. ToolMenuBench varies tool-menu size, distractor type, state-dependent task structure, and risk exposure, and reports both filter-level and downstream agent metrics, including visible-tool count, risky-tool exposure, task success, wrong-tool calls, premature actions, and token usage. In a controlled evaluation across seven model backends, three tool-menu sizes, six filtering methods, and seven evaluation settings, CMTF improves task success from 32.1% under all-tools exposure to 85.7%, while reducing average token usage by roughly 98%. Causal minimal tool filtering achieves the strongest overall tradeoff, reducing visible tools, wrong-tool calls, premature actions, and risky-tool exposure relative to unfiltered exposure, lexical filtering, state-aware filtering, and broader causal-path baselines. ToolMenuBench provides a reusable evaluation framework for studying the agent-interface problem: which tools should be visible, when they should be visible, and under what cost or risk constraints.

06.
arXiv (CS.AI) 2026-06-15

FactoryLLM: A Safe and Open-Source AI Playground for Evaluating LLMs in Smart Factories

arXiv:2606.14119v1 Announce Type: new Abstract: Fault diagnostics and recovery in smart factories is challenging because critical information is dispersed across manuals of multiple machines which are interconnected through the manufacturing process. Large Language Models (LLMs) can provide a promising approach. In this paper, we propose FactoryLLM, a safe and open-source AI playground designed for evaluating different LLM-based retrieval-augmented generation (RAG) models by analysing documents from multiple machines across the manufacturing process. FactoryLLM enables the user to configure the LLM, and assess performance when reasoning over multiple documents, through a dual evaluation setup using both RAGAS and NVIDIA's LLM-as-a-Judge metrics. FactoryLLM is safe because it allows users to run local or open-source LLMs without sharing sensitive industrial data, providing a controlled environment for experimentation. We demonstrate the efficacy of FactoryLLM through a case study which involves an Autonomous Intelligent Vehicle and its Mobile Planner software, evaluating three LLMs across 30 maintenance queries derived from approximately 600 pages of cross-machine documentation. The results suggest that FactoryLLM is effective in cross-machine document reasoning: every model achieved a groundedness score above 0.88. The full code and documentation for community to test FactoryLLM with their manufacturing specific scenarios are publicly available.

07.
arXiv (CS.CL) 2026-06-17

LLM Features Can Hurt GNNs: Concatenation Interference on Homophilous Graph Benchmarks

Adding LLM-generated node features to graph neural networks (GNNs) is widely reported to improve accuracy on standard benchmarks. We document a contrasting observation: when LLM features are introduced through pure input concatenation (rather than joint training, distillation, or prompt-conditioning), they can systematically degrade accuracy on the same homophilous benchmarks where end-to-end LLM pipelines succeed. With an MLP backbone on the Planetoid public split and bag-of-words original features, concatenating SBERT-encoded GPT-4o-mini TAPE features reduces PubMed test accuracy by -17.0 +/- 0.3 pp and Cora by -4.3 +/- 0.6 pp (CiteSeer -0.6 +/- 0.8 pp, within seed noise). The drop attenuates as we relax each condition (GCN / GCNII / GAT backbones, random splits, smaller encoders) and reverses on medium-homophily WikiCS (+4.4 pp) and ogbn-arxiv (+11.7 pp). To predict when concatenation helps versus hurts, we report a simple measure of LLM-alone discriminability, Delta_sig. Across 9 datasets Delta_sig correlates with the concatenation cost more strongly than homophily at point estimate (r^2 = 0.38 vs. 0.06; N=9, bootstrap CIs overlap). The bootstrap-best change-point is tau = 13.8 pp, and the rule "Delta_sig

08.
arXiv (CS.CL) 2026-06-16

Understanding Scam Trends and Rail Paths from Reddit Self-Disclosure Narratives

Online scam behavior is inherently multi-stage, and the lifecycle includes temporally ordered rails and events rather than isolated signals. Existing works analyze characteristics of scam types and rails, but they do not track scam trends across years. Moreover, the work on the relations between rails is hampered due to the lack of open-source datasets with annotations and coverage of different scam types. To address these gaps, we build a dataset to analyze the yearly trend of scam characteristics and rail paths using Reddit self-disclosure narratives from 2023 to 2025. We collect 21,304 posts from scam-related subreddits with at least one rail among identity, communication, platform, and payment for trend analysis by heuristic annotation. Then, we label 1,800 posts containing explicit or recoverable scam chains by an LLM-assisted method for scam path analysis. The method is evaluated with human annotation. Lastly, we run a topic model on the comments of the posts to analyze the community support behavior. The results reveal that scam processes are predominantly multi-rail. Across years, different scam types and rail components dominate. Different scam types vary systematically in path complexity. Reddit support behaviors have become more detailed over time. This work supports synthetic scam chain data simulation and AI-related scam risk assessment, though findings may not generalise to other platforms.

09.
arXiv (CS.CV) 2026-06-18

A Survey on Deep Learning Architectures for Point Cloud Classification and Segmentation

Point cloud stands as the most widely adopted format for representing 3D shapes and scenes due to its simplicity and geometric fidelity. However, its inherent unordered and irregular nature, exacerbated by sensor noise and occlusions, introduces unique challenges for machine learning based methodologies. To combat these issues, diverse strategies have been developed, including converting to a format that has orderliness, extracting local geometry, and permutation-invariant or self-attention-based processing. In this paper, our focus is directed towards deep learning models for three fundamental tasks in 3D vision: point cloud classification, part segmentation, and semantic segmentation. We begin by formally defining point cloud data, followed by an in-depth discussion on its structural characteristics. Then, we categorize notable works based on their backbone structure and evaluate their performance on popular benchmarks. Beyond empirical comparison, we offer insights into architectural innovations and limitations. We also outline open challenges and promising future directions for 3D point cloud understanding.

10.
arXiv (CS.CL) 2026-06-17

Priors Persist Through Suppression: A Stroop Paradigm for Lexical Override

Authors:

Glossaries, technical specifications, and system prompts routinely ask language models to use familiar words in unfamiliar ways. When this works, the local rule does not install the new meaning on top of the old one; the pretrained prior keeps operating underneath, and its strength still shows through. We test this with a Stroop-style paradigm: a remapping rule (doctor means forest) pitted against the query word's lexical-prior distractor (hospital), with matched neutral controls. Across 11 open-weight models spanning four families and 1B-9B parameters, lexical-prior strength predicts interference even after item-level controls for answer prior, frequency, tokenization, and prompt wording. Activation patching on five aligned models locates a source-position triplet (definition subject, definition target, query word) that nearly fully recovers the conflict effect (aggregate $R \in [0.92, 1.06]$); a definition-target swap shows the triplet performs binding rather than identity matching. Dissociation experiments isolate target preservation as the binding-specific signature: distractor suppression occurs under matched, swap, and item-mismatched conditions alike, whereas target logit collapse occurs only when the definition-target position is corrupted. Behavior and mechanism converge on the same channel: the prior's strength both predicts which overrides fail and marks where the causal repair lands.

11.
arXiv (CS.CV) 2026-06-11

Frames2LoRA: Parametric Video Internalization for Vision-Language Models

Processing video in vision-language models is expensive: each frame occupies hundreds of tokens, and inference cost scales with every frame and every repeated query. We introduce Frames2LoRA, a method for parametric video internalization. A perceiver hypernetwork reads the intermediate representations produced layer-by-layer as a frozen VLM encodes a video, and generates a Low-Rank Adaptation (LoRA) adapter in a single forward pass. Unlike standard LoRA fine-tuning, which requires iterative gradient updates, Frames2LoRA predicts these weights directly from the video. Trained for SmolVLM2 500M and 2.2B on video summarization and captioning, Frames2LoRA enables the same frozen VLM to answer queries from the adapter alone, with zero visual tokens in its context at query time. Frames2LoRA is statistically non-inferior and equivalent to direct video-in-context inference across all five captioning benchmarks at both model scales, and across seven of eight video question answering benchmark-scale pairings. Although trained only on 12 frames at 384px, it remains stable up to 1,024 frames and 1024px, where direct video-in-context inference often degenerates. Across this sweep, it reduces answer-time visual-token load by up to 1,500x and query TTFT by 6-80x, while preserving video-faithful outputs. We also find that independently generated adapters for non-overlapping video segments can compose in rank space, suggesting a path toward chunked long-video internalization.

12.
arXiv (CS.CL) 2026-06-19

CogniFold: Always-On Proactive Memory via Cognitive Folding

Existing agent memory remains predominantly reactive and retrieval-based, lacking the capacity to autonomously organize experience into persistent cognitive structure. Toward genuinely autonomous agents, we introduce CogniFold, a brain-inspired "always-on" agent memory designed for the next generation of proactive assistants. CogniFold continuously folds fragmented event streams into self-emerging cognitive structures, bootstrapping progressively higher-level cognition from incoming events and accumulated knowledge. We ground this by extending Complementary Learning Systems (CLS) theory from two layers (hippocampus, neocortex) to three, adding a prefrontal intent layer. Emulating the prefrontal cortex as the locus of intentional control and decision-making, CogniFold achieves this through graph-topology self-organization: cognitive structures proactively assemble under the stream, merge when semantically similar, decay when stale, relink through associative recall, and surface intents when concept-cluster density crosses a threshold. We evaluate structural formation using CogEval-Bench, demonstrating that CogniFold uniquely produces memory structures that match cognitive expectations and concept emergence. Furthermore, across eight downstream benchmarks – two probing long-term conversational memory (LoCoMo, LongMemEval) and six spanning other cognitive domains – we validate that CogniFold simultaneously performs robustly on conventional memory tasks. Our code is available at https://github.com/OpenNorve/CogniFold.

13.
arXiv (CS.LG) 2026-06-17

Reducing Learner Redundancy in Boosting via Residual Orthogonalization

arXiv:2606.17567v1 Announce Type: new Abstract: While sequential residual fitting is the bedrock of standard boosting frameworks, it inherently breeds learner redundancy by repeatedly revisiting correlated error components. To address this bottleneck, we propose a shift from residual fitting to residual orthogonalization and introduce SCBoost. Our framework tackles redundancy through two complementary mechanisms: Spectral Residual Projection (SRP) and Covariance-Regularized Weighting (CRW). During training, SRP projects each residual target onto the orthogonal complement of the historical prediction subspace, forcing successive learners to capture only novel empirical innovations. During aggregation, CRW optimizes ensemble weights on a validation set with an explicit covariance penalty to mitigate remaining correlations. Theoretically, we provide a finite-sample geometric characterization proving that SRP yields an exact additive residual-energy decomposition. Furthermore, under an isotropic-noise assumption, we rigorously establish the conditions under which this projection improves the effective Signal-to-Noise Ratio. Extensive experiments across ten benchmark datasets demonstrate that SCBoost delivers strong out-of-the-box performance, particularly in accuracy and F1 score. This work reinterprets boosting through a geometric lens, suggesting that explicit redundancy control is a principled and necessary step toward more efficient ensemble architectures.

14.
PLOS Computational Biology 2026-06-22

Beyond the canonical: The role of post-transcriptional regulation in drug-target interaction prediction

by Md Istiaq Ansari, Khandakar Tanvir Ahmed, Debby D. Wang, Kirill Medvedev, Wei Zhang Protein isoforms produced from the same gene through post-transcriptional regulatory mechanisms, such as alternative splicing, can substantially alter protein structure and function, including drug-binding properties. However, most existing drug-target interaction (DTI) and drug-target affinity (DTA) prediction models rely exclusively on a single representative protein sequence per gene, typically the canonical or longest isoform, thereby overlooking the functional diversity introduced by alternative isoforms. This assumption can introduce bias, limit generalizability, and compromise the biological validity of model predictions. In this study, we systematically investigate the impact of protein isoform variation on DTI prediction accuracy. Our results show that substituting the canonical sequence with an alternative isoform often leads to substantial declines in predictive performance. Structural and binding affinity analyses further reveal that these discrepancies are frequently associated with changes in predicted binding-site configurations, which we further examine through controlled perturbations of binding-site residues. These experiments suggest that even subtle alterations in binding regions can lead to inconsistent DTI predictions. Overall, our findings uncover a critical limitation in current DTI modeling frameworks and underscore the importance of incorporating isoform-specific information to better reflect biological reality and improve therapeutic relevance. The codes and datasets are available at https://github.com/compbiolabucf/DTIVariant.

15.
Nature Medicine 2026-06-10

Brain Health for Economic Resilience: a data-driven framework for the brain-positive economic transition

Announced in this Comment and in collaboration with Nature Medicine is the convening of the Brain Health for Economic Resilience Commission, a global, transdisciplinary effort to define, measure and operationalize brain health and cognitive capacity as foundational drivers of economic resilience.

16.
arXiv (CS.AI) 2026-06-17

SP-GCRL: Influence Maximization on Incomplete Social Graphs

arXiv:2605.12513v2 Announce Type: replace-cross Abstract: Influence maximization (IM) in real platforms is challenged by incomplete, noisy social graphs and non-stationary diffusion dynamics. We propose SP-GCRL, a social-propagation-aware graph contrastive reinforcement learning framework that learns end-to-end seed selection under partial observability.We first introduce a social-propagation-aware nonlinear diffusion function to model reinforcement/diminishing effects and probability drift under repeated exposure; we then construct dual structural views and perform contrastive learning to obtain node representations robust to missing edges and weak ties, while replacing expensive strategy metrics with a GAT-based regression surrogate to improve efficiency and scalability; finally, we use DDQN to learn an end-to-end seed selection policy on top of these representations. Experiments on multiple real-world networks show that SP-GCRL achieves significant gains over heuristic and learning-based baselines across budgets and topologies, while maintaining strong large-scale scalability.

17.
arXiv (CS.AI) 2026-06-17

All Smoke, No Alarm: Oracle Signals in Agent-Authored Test Code

arXiv:2606.18168v1 Announce Type: cross Abstract: Software practitioners increasingly use AI coding agents that generate test code alongside production code in open source pull requests (PRs). Recent studies report more than 932,000 agent-authored PRs across more than 116,000 repositories, yet whether their test files contain meaningful verification logic remains underexplored. Test files lacking explicit assertions execute code without verifying behavior, so quality gates based on test-file presence overestimate verification strength. The goal of this paper is to help practitioners assess the verification strength of agent-authored patches by characterizing oracle signals and their link to merge outcomes and review effort. We conduct an empirical study of 86,156 test-file patches from 33,596 agent-authored PRs across 2,807 GitHub repositories produced by five coding agents: OpenAI Codex, GitHub Copilot, Devin, Cursor, and Claude Code. A qualitative analysis of 384 stratified patches informs a syntactic taxonomy of eight oracle signal categories. Applied at scale, 80.2% of test patches contain weak or no explicit oracle signals. While raw merge rates are lower for strong-oracle PRs, a regression analysis adjusting for agent, PR size, repository popularity, task type, and language shows strong oracles significantly improve merge likelihood (OR = 1.28, p < 0.001). Our findings suggest that test file counts substantially overestimate verification strength and that practitioners can adopt oracle-aware quality checks to more accurately evaluate agent-authored contributions.

18.
Nature Biotechnology 2026-06-23

Efficient generation of epitope-targeted antibodies with Germinal

Obtaining antibodies to specific protein targets is a widely important yet experimentally laborious process. Meanwhile, computational methods for antibody design have been limited by low success rates that require resource-intensive screening. Here we introduce Germinal, a broadly enabling generative pipeline that designs antibodies against specific epitopes with nanomolar binding affinities while requiring only low-n experimental testing. Our method co-optimizes antibody structure and sequence by integrating a structure predictor with an antibody-specific protein language model to perform de novo design of functional complementarity-determining regions onto a user-specified structural framework. When tested against four diverse protein targets, Germinal designed functional antibodies across all targets and binder formats, testing only 43–101 designs for each antigen. Validated designs also exhibited robust expression in mammalian cells and high sequence and structural novelty. We provide open-source code and full computational and experimental protocols to facilitate wide adoption. Germinal achieves epitope-targeted, de novo complementarity-determining region design with high experimental success rates.

19.
arXiv (CS.CV) 2026-06-12

World Tracing: Generative Pixel-Aligned Geometry Beyond the Visible

Image-to-3D methods often trade off faithfulness and completeness: depth estimators are anchored to input pixels but stop at the visible surface, while image-to-3D models generate complete shapes that are often misaligned with the input. We introduce World Tracing, a generative pixel-aligned geometry representation that predicts 3D points aligned with observed pixels while completing geometry beyond the visible surface. For each input pixel, World Tracing predicts an ordered stack of camera-space 3D points, where the first layer represents the visible surface and subsequent layers represent front-to-back intersections with occluded surfaces. We instantiate this representation with a world-tracing diffusion transformer, WT-DiT, which treats multiple geometry layers as separate denoising tokens coupled through factorized and global attention. WT-DiT is trained with pixel-space flow matching and a mixed noise schedule that balances visible-surface reconstruction with occluded-geometry generation. World Tracing achieves strong performance on visible-surface reconstruction and complete geometry generation across object, scene, and dynamic benchmarks, outperforming both depth predictors and image-to-3D generators. It also preserves 2D-to-3D correspondence, enabling text-driven 3D scene editing, geometry-conditioned novel-view video synthesis, and training-free integration with textured-mesh generators.

20.
arXiv (quant-ph) 2026-06-16

Cosmological Pseudo-Entropy

arXiv:2606.15227v1 Announce Type: cross Abstract: We study pseudo entropy $\mathcal{S}$, a recent generalization of entanglement entropy, for scalar cosmological perturbations in de Sitter space with sound speed $0.024 \leq c_s \leq 1$, and in expanding and contracting FLRW backgrounds with varying equation-of-state parameter $w$. In de Sitter space, $\mathrm{Re}(\mathcal{S})$ grows after horizon exit while $c_s$ controls its onset and saturates at late times. A similar saturation occurs in expanding-accelerating and contracting-decelerating backgrounds. In contrast, expanding-decelerating and contracting-accelerating backgrounds show large early-time $\mathrm{Re}(\mathcal{S})$ followed by oscillations after horizon re-entry. This happens because while the squeezing freezes, the squeezing angle doesn't. Unlike entanglement entropy, pseudo entropy possesses an imaginary part, $\mathrm{Im}(\mathcal{S})$, as well, which can encode the relative phase. $\mathrm{Im}(\mathcal{S})$ decays to zero in de Sitter and expanding-accelerating cases, but forms dense sub-Hubble oscillation bands in expanding-decelerating and contracting-accelerating backgrounds. Compared with entanglement entropy, Krylov complexity, and Nielsen circuit complexity, pseudo entropy captures otherwise hidden phase information; in the unsaturated regime, its slope is $\sqrt{2}$ times that of Nielsen complexity. Unlike circuit complexity, whose saturation bound is $w$-independent, pseudo entropy is sensitive to $w$ during the transition regime, making it a finer information theoretic diagnostic of cosmological dynamics.

21.
arXiv (math.PR) 2026-06-16

BBP Phase Transition for a Doubly Sparse Deformed Model

arXiv:2603.04832v3 Announce Type: replace Abstract: We prove the equivalent of the Baik, Ben Arous, Péché (2004) phenomenon for a novel, doubly sparse model where both the Wigner noise matrix and signal vector(s) are sparse. Specifically, we consider a deformed sub-Gaussian sparse Wigner ensemble with a fixed number of sub-Gaussian spike vectors of the same-order sparsity added. We show that spike vectors with signals greater than one are correlated with the top eigenvectors of the deformed ensemble and that each spike vector of signal greater than one induces an outlier eigenvalue. Notably, our results hold in the supercritical sparsity regime for the Wigner matrix ($q \gg \frac{\log n}{n}$) and for any sparse spike vector with an unbounded number of entries ($np\to \infty$). No further relationship between the sparsities of the noise matrix ($q$) and spike vectors ($p$) is necessary. This generalizes the work of Benaych-Georges and Nadakuditi (2010) and Péché (2005).

22.
arXiv (CS.LG) 2026-06-19

How to sketch a learning algorithm

Authors:

arXiv:2604.07328v3 Announce Type: replace Abstract: How does the choice of training data influence an AI model? This broad question is of central importance to interpretability, privacy, and basic science. At its technical core is the data deletion problem: after a reasonable amount of precomputation, quickly predict how the model would behave in a given situation if a given subset of training data had been excluded from the learning algorithm. We present a data deletion scheme capable of predicting model outputs with vanishing error $\varepsilon$ and failure probability $\delta$ in the deep learning setting. Our precomputation and prediction algorithms are only $\tilde{O}(\log(1/\delta)/\varepsilon^2)$ factors slower than regular training and inference, respectively. The storage requirements are those of $\tilde{O}(\log(1/\delta)/\varepsilon^2)$ models. Our proof is based on an assumption that we call stability. In contrast to the assumptions made by prior work, stability appears to be fully compatible with learning powerful AI models. In support of this, we show that stability is satisfied in a minimal set of experiments with microgpt. Our code is available at https://github.com/SamSpo1/microgpt-sketch. At a technical level, our work is based on a new method for locally sketching an arithmetic circuit by computing higher-order derivatives in random complex directions. Forward-mode automatic differentiation allows cheap computation of these derivatives.

23.
arXiv (quant-ph) 2026-06-11

PHASE: Pauli Hierarchical Assembly on Subdivided Elements for Quantum-Compatible Operator Synthesis

arXiv:2606.11478v1 Announce Type: new Abstract: Efficiently decomposing finite element stiffness matrices into the Pauli basis is challenging due to the exponential growth of Pauli strings with problem size. A naive Pauli expansion requires $\Theta(8^{\lceil \log_2 N \rceil})$ operations, where $N$ denotes the number of degrees of freedom, rendering direct decomposition infeasible for large systems. Existing approaches exploit algebraic sparsity or operator structure but do not incorporate the geometric organization intrinsic to finite element discretizations, and consequently exhibit poor scaling for stiffness matrices. To address this problem, we introduce PHASE, a hierarchical, geometry-aware Pauli decomposition algorithm that leverages recursive mesh partitioning to organize element contributions across multiple spatial scales. PHASE employs a hybrid strategy that combines full- and reduced-space Tensorized Pauli Decomposition with Fast Walsh-Hadamard Transform-based aggregation to assemble global Pauli coefficients efficiently. We show that this approach yields a dimension-dependent reduction in the exponential scaling exponent of Pauli assembly asymptotic complexity relative to existing methods, reducing the cost from $2^{2{\lceil \log_2 N \rceil}}$ to $2^{\gamma_d{\lceil \log_2 N \rceil}}$ with $\gamma_d < 2$ under standard mesh regularity and balanced partition assumptions. These results substantially improve the feasibility of quantum-compatible operator synthesis for large-scale finite element models.

24.
arXiv (CS.LG) 2026-06-16

Towards Functional Correctness of Large Code Models with Selective Generation

arXiv:2505.13553v3 Announce Type: replace-cross Abstract: The hallucination of code generation models hinders their applicability to systems requiring higher safety standards. One critical bottleneck in addressing code hallucination is the difficulty of identifying the functional correctness of generated code, due to its unnatural form. We address this core bottleneck by automatically generating unit tests using dynamic code analysis tools, leveraging the executable nature of code. Accordingly, we propose a selective code generator that abstains from uncertain generations – based on the functional correctness evaluated by generated unit tests – to theoretically control the correctness among non-abstained answers, \ie the false discovery rate. Finally, we propose to use generated unit tests in evaluation as well as in learning for precise code evaluation, calling this paradigm FuzzEval. We demonstrate the efficacy of our method along with the controllability of code hallucination and reasonable selection efficiency.

25.
arXiv (CS.AI) 2026-06-18

CaVe-VLM-CoT: An Interpretable Vision-Language Model Framework

arXiv:2606.18385v1 Announce Type: new Abstract: Vision-Language Models (VLMs) remain prone to hallucinations, producing fluent but visually unfaithful outputs. Existing chain-of-thought and retrieval-augmented methods only partially address this, as they neither enforce step-level citation grounding nor route verification failures back to retrieval for correction. We present CaVe-VLM-CoT, a modular reflection-based agentic-RAG framework that enforces evidence-grounded reasoning through a five-stage closed-loop pipeline: Extractor, Retriever, Solver, Citation Injector, and Verifier, in which detected ungrounded claims trigger structured feedback to the Extractor for targeted re-retrieval. Since no existing framework jointly measures retrieval quality, step-wise citation faithfulness, and cross-modal grounding, we propose a suite of 23 component-wise metrics across all stages, anchored by CaVeScore, a composite metric weighting accuracy, citation precision and recall, attribution, and evidence grounding. Without any architectural or prompt modifications, CaVe-VLM-CoT achieves 87.1\% accuracy and 56.6\% CaVeScore on ScienceQA , and 55.2\% accuracy and 35.7\% CaVeScore on MMMU (30 subjects).