Academic Intelligence · Curated Daily

探索全球前沿学术脉络

AcademicHub 汇聚顶级期刊与预印本平台的实时文献。定制您的专属科研雷达,利用大语言模型自动生成交叉领域文献分析简报。

01.
arXiv (math.PR) 2026-06-11

Sure-almost-sure and Sure-limit-sure Window Mean Payoff in Markov Decision Processes

arXiv:2605.12191v2 Announce Type: replace-cross Abstract: Given rationals $\alpha$ and $\beta$, the sure-almost-sure problem for a threshold Boolean objective $\varphi$ in a Markov decision process (MDP) asks if one can simultaneously ensure that all outcomes of the MDP have $\varphi$-value at least $\alpha$ (i.e. sure $\alpha$ satisfaction) and with probability $1$ the outcome has $\varphi$-value at least $\beta$ (i.e. almost-sure $\beta$ satisfaction). The sure-limit-sure problem asks if for all $\varepsilon > 0$ one can simultaneously ensure that all outcomes have $\varphi$-value at least $\alpha$ and with probability at least $1 - \varepsilon$ the outcome has $\varphi$-value at least $\beta$. Moreover, if simultaneous satisfaction of objectives is possible, then one would also like to construct a strategy (for sure-almost-sure) or a family of strategies (for sure-limit-sure) that achieves this. In this paper, we solve the sure-almost-sure and sure-limit-sure problems for window mean-payoff objectives. The window mean-payoff objective strengthens the standard mean-payoff objective by requiring that eventually, from every point in the infinite run, the average payoff becomes greater than a given threshold within a finite window length. We study two variants of window mean payoff: in the fixed variant, the window length $\ell$ is given, while in the bounded variant, the length is not given but is required to be bounded throughout the run. We show that the sure-almost-sure problem and the sure-limit-sure problem are both in P for the fixed variant (if $\ell$ is given in unary) and are both in NP $\cap$ coNP for the bounded variant, matching the computational complexity of sure satisfaction and almost-sure satisfaction when considered separately for these objectives. We also give bounds for the memory requirement of winning strategies for all considered problems.

02.
arXiv (quant-ph) 2026-06-17

Coupled-Mode Equations with Arbitrary Mode Combinations for Kinetic-Inductance Superconducting Traveling-Wave Parametric Devices: Theory and Experimental Validation

arXiv:2606.17264v1 Announce Type: cross Abstract: The coupled-mode equations (CMEs) have proven very successful in describing parametric processes in nonlinear optics. More recently, the same formulation has been used to model microwave superconducting parametric amplifiers and frequency multipliers. However, when applied to the microwave regime, not all assumptions remain valid and losses play a more dramatic role. Here, we revisit the CMEs applied to traveling-wave superconducting amplifiers to include losses and provide a formulation that enables their systematic derivation for any combination of traveling waves. As examples, we discuss the impact of unwanted harmonics and intermodulation products on parametric amplification, as well as harmonic generation. We verify that, if not properly accounted for, device performance can deviate considerably from the ideal case. Furthermore, using a superconducting CPW-based artificial transmission line and combining an independent experimental determination of its nonlinear parameter $I'_*$ with simulations of its linear properties, we obtain a parameter-free validation of this formulation. The nonlinear parameter was determined to be $I'_* \approx 27$ mA which, surprisingly, scales with the theoretical depairing current and not with the much smaller critical current of the device. For the validation, we measured multiple-harmonic generation and found excellent agreement between theory and experiment. The fact that $I'_* \gg I_C$ has direct implications for device design.

03.
arXiv (CS.AI) 2026-06-11

Human-Enhanced Loop Modeling (HELM): Agent-Based Finite Element Modeling of Concrete Bridge Barriers

arXiv:2606.12025v1 Announce Type: new Abstract: Finite element (FE) modeling of safety-critical infrastructure such as bridge barriers requires high-fidelity nonlinear dynamic analysis, yet the current FE modeling process remains labor-intensive and lacks automation. This paper presents the Human-Enhanced Loop Modeling (HELM) framework, a collaborative human-agent protocol that decomposes long-sequence finite element modeling into discrete, visually verifiable checkpoints across geometry generation, boundary condition definition, and material assignment. The framework is demonstrated through a 20-case matrix of reinforced concrete bridge barriers under MASH TL-4 and TL-5 lateral loading conditions, interfacing specialized agents with two widely used commercial FE softwares, i.e., ANSYS and LS-PrePost. Experimental results show that HELM improves the baseline autonomous modeling success rate from 20% to 75%, with agent-level pass rates for geometry and boundary condition tasks approximately doubling. Error analysis reveals that spatial reasoning and algebraic logic limitations constitute the primary failure modes, underscoring the value of structured human-in-the-loop intervention for modeling automation. The complete agent design code and prompts are open-sourced and can be accessed at: https://github.com/SimAgentDev/Ansys-LSPP-AgentKit.

04.
arXiv (CS.LG) 2026-06-18

Towards a future space-based, highly scalable AI infrastructure system design

arXiv:2511.19468v2 Announce Type: replace-cross Abstract: If AI is a foundational general-purpose technology, we should anticipate that demand for AI compute – and energy – will continue to grow. The Sun is by far the largest energy source in our solar system, and thus it warrants consideration how future AI infrastructure could most efficiently tap into that power. This work explores a scalable compute system for machine learning in space, using fleets of satellites equipped with solar arrays, inter-satellite links using free-space optics, and Google tensor processing unit (TPU) accelerator chips. To facilitate high-bandwidth, low-latency inter-satellite communication, the satellites would be flown in close proximity. We illustrate the basic approach to formation flight via an 81-satellite cluster of 1 km radius, and describe an approach for using high-precision ML-based models to control large-scale constellations. Trillium TPUs are radiation tested. They survive a total ionizing dose equivalent to a 5 year mission life without permanent failures, and are characterized for bit-flip errors. Launch costs are a critical part of overall system cost; a learning curve analysis suggests launch to low-Earth orbit (LEO) may reach $\lesssim$\$200/kg by the mid-2030s.

05.
arXiv (CS.AI) 2026-06-11

TreeSeeker: Tree-Structured Trial, Error, and Return in Deep Search

arXiv:2606.11662v1 Announce Type: new Abstract: Deep search requires agents to answer complex questions through multi-step web search, browsing, evidence comparison, and synthesis. A central challenge is deciding how to search when several directions look plausible but only some will later lead to reliable evidence. If an agent greedily follows the current best-looking direction, it may keep extending a weak continuation. If it explores without discipline, it may waste budget on disconnected trials. We propose TreeSeeker, an inference-time framework for controlled trial-and-error in deep search. TreeSeeker organizes search as branch-and-return search over tree-structured states, where each branch is a tentative direction for a sub-goal. At each round, TreeSearch reads all sub-goal trees, identifies active goals, and uses textual UCB signals of value, uncertainty, and risk to select among exploiting a promising branch, exploring an uncertain alternative, or pruning an unproductive continuation and returning to an earlier branch point. TreeMem supports this control loop by keeping evidence, uncertainty, conflicts, progress, and failure cues attached to the branches that produced them, so trial outcomes can guide later decisions. Experiments on XBench-DeepSearch, BrowseComp, and BrowseComp-ZH show that TreeSeeker consistently outperforms strong open-source baselines, suggesting that explicit branch-and-return control complements stronger reasoning and tool execution.

06.
arXiv (CS.AI) 2026-06-15

The Silent Cost of Artificial Intelligence Assistance: A Theory of Autonomy Surrender, the Recovery Mechanism, and the Restoration of Human Agency

arXiv:2606.13962v1 Announce Type: cross Abstract: The integration of artificial intelligence into human decision-making environments has introduced a previously undertheorized cost: the gradual surrender of human autonomy in exchange for access to information and computational assistance. Building on the Human Identity and Autonomy Gap (HIAG) framework, this paper advances a theoretical model of autonomy surrender as a measurable, cumulative process driven by cognitive bandwidth depletion. The model proposes three interacting mechanisms: the silent cost of AI assistance, in which autonomy is transferred incrementally and without awareness; the surrender threshold, beyond which reclaiming autonomous function becomes cognitively and psychologically difficult; and the recovery mechanism, which establishes the design obligation and the ethical responsibility accompanying deliberate human re-assumption of control. The paper argues that human re-entry into the decision loop is not a passive option but an active cognitive event requiring intentional bandwidth restoration. The design of AI systems must incorporate structured re-entry pathways, here termed recovery mechanisms, that preserve human agency while appropriately distributing responsibility. The model further predicts a terminal state, here termed preference inversion, in which functional dependence on AI assistance is experienced not as a deficit but as a preference, transforming the restoration of autonomy from a design problem into a cultural and political one. Implications are drawn for AI system design, governance frameworks, and human factors research.

07.
arXiv (CS.CV) 2026-06-12

Improving Pre-trained Adult Glioma Segmentation Models Using only Post-processing Techniques

Gliomas are the most common malignant brain tumors in adults and are among the most lethal. Despite aggressive treatment, the median survival rate is less than 15 months. Accurate multiparametric MRI (mpMRI) tumor segmentation is critical for surgical planning, radiotherapy, and disease monitoring. While deep learning models have improved the accuracy of automated segmentation, large-scale pre-trained models generalize poorly and often underperform, producing systematic errors such as false positives, label swaps, and slice discontinuities in slices. These limitations are further compounded by unequal access to GPU resources and the growing environmental cost of large-scale model training. In this work, we propose adaptive post-processing techniques to refine the quality of glioma segmentations produced by large-scale pretrained models developed for various types of tumors. We demonstrated the techniques in multiple BraTS 2025 segmentation challenge tasks, with the ranking metric improving by 14.9 % for the sub-Saharan Africa challenge and 0.9% for the adult glioma challenge. This approach promotes a shift in brain tumor segmentation research from increasingly complex model architectures to efficient, clinically aligned post-processing strategies that are precise, computationally fair, and sustainable.

08.
arXiv (quant-ph) 2026-06-15

Bandstructure of a coupled BEC-cavity system: effects of dissipation and geometry

arXiv:2504.17730v2 Announce Type: replace-cross Abstract: We present a theoretical model for a transversally driven Bose-Einstein condensate coupled to an optical cavity. We focus on the interplay between different coherent couplings, which can trigger a structural phase transition, known as the superradiant phase transition. Our approach, based on band structure theory and a mean-field description, enables a comprehensive analysis of the nature of the system's excited modes, precursing the phase transitions. By incorporating dissipative couplings, intrinsic to these systems, we find non-Hermitian phenomena such as the coalescence of crossing precursor modes and the emergence of exceptional points (EPs). The general formulation of our model allows us to explain the role of an angle between transverse pump and the cavity deviating from $90^\circ$. This offers us a unified perspective on the plethora of different implementations of such systems.

09.
arXiv (CS.LG) 2026-06-12

From geometry to dynamics: Learning overdamped Langevin dynamics from sparse observations with geometric constraints

arXiv:2512.23566v2 Announce Type: replace-cross Abstract: How can we learn the laws underlying the dynamics of stochastic systems when their trajectories are sampled sparsely in time? Existing methods either require temporally resolved high-frequency observations, or rely on geometric arguments that apply only to conservative systems, limiting the range of dynamics they can recover. Here, we present a new framework that reconciles these two perspectives by reformulating inference as a stochastic control problem. Our method uses geometry-driven path augmentation, guided by the geometry in the system's invariant density to reconstruct likely trajectories and infer the underlying dynamics without assuming specific parametric models. Applied to overdamped Langevin systems, our approach accurately recovers stochastic dynamics even from extremely undersampled data, outperforming existing methods in synthetic benchmarks. This work demonstrates the effectiveness of incorporating geometric inductive biases into stochastic system identification methods.

10.
arXiv (math.PR) 2026-06-15

Sharp Favard length of random Cantor sets

arXiv:2512.17753v2 Announce Type: replace-cross Abstract: We show that for a large class of planar $1$-dimensional random fractals $S$, the Favard length $\operatorname{Fav}(S(r))$ of the neighborhood $S(r)$ is comparable to $\log^{-1}(1/r)$, matching a universal lower bound; up to now, this was only known in expectation for a few concrete models. In particular, we show that there exist $1$-Ahlfors regular sets with the fastest possible Favard length decay. For a wide class of planar one-dimensional "grid random fractals", including fractal percolation and its Ahlfors-regular variants, we further show that $\operatorname{Fav}(S(r))/\log(1/r)$ converges almost surely, and we identify the limit explicitly. Furthermore, we prove that for some $1$-dimensional Ahlfors-regular random fractals $S$, the Favard length of $S(r)$ decays instead like $\log\log(1/r)/\log(1/r)$, showing that the $1/\log(1/r)$ decay is not universal among random fractals, as might be expected from previous results.

11.
arXiv (CS.LG) 2026-06-12

GEMSS: A Variational Bayesian Method for Discovering Multiple Sparse Solutions in Classification and Regression Problems

arXiv:2602.08913v2 Announce Type: replace Abstract: High-dimensional, underdetermined and highly correlated systems are common in data science practice, especially when analyzing physical measurements. In such settings, feature selection poses a fundamental challenge because multiple distinct sparse subsets may explain the response equally well. Their identification is crucial not only for predictive modeling but also for generating domain-specific insights into the underlying mechanisms. Yet, conventional methods typically isolate a single solution, obscuring the full spectrum of plausible explanations. This work introduces GEMSS (Gaussian Ensemble for Multiple Sparse Solutions), a variational algorithm designed to simultaneously discover multiple, diverse sparse feature combinations. The method employs a structured spike-and-slab prior for sparsity, a mixture of Gaussians to approximate the intractable multimodal posterior, and a Jaccard-based penalty to further control solution diversity. A single objective function is optimized via stochastic gradient descent. The method is tested on 128 comprehensive experiments by a novel benchmarking framework designed to generate artificial problems with multiple sparse solutions of equal predictive properties. This allows us to measure the retrieval of ground truth features rather than only evaluating predictive performance – characteristics more fitting to our practical needs. A comparative analysis shows that GEMSS consistently outperforms five prominent feature selection methods adapted through the ALFESE framework. Finally, we demonstrate practical usability through 3 challenging real-world datasets from metabolomics and physical chemistry: GEMSS successfully isolates multiple distinct yet quality solutions. GEMSS is available as a PyPI package 'gemss'. The corresponding repository github.com/kat-er-ina/gemss/ includes the full codebase and a free, no-code application GEMSS Explorer.

12.
arXiv (quant-ph) 2026-06-11

The Simplified Stabilizer ZX-Calculus is Minimal

arXiv:2606.12383v1 Announce Type: new Abstract: The stabilizer fragment of the ZX calculus is amongst the most important fragments of the theory. The closely related Clifford+T fragment is approximately universal (arXiv:1705.11151). Additionally, the stabilizer calculus can be described by a small collection of rewrites, most of which have been shown to be necessary (arXiv:1709.08903). However, two rules, describing the red/green compact-structure coincidence and the important bialgebra law, had not been shown to be necessary. We present a countermodel-style argument showing that both of these rules are individually necessary relative to the connectivity meta-rule of Backens–Perdrix–Wang (arXiv:1709.08903), and hence establish that the rule set presented in arXiv:1709.08903 has no redundant rewrite rule.

13.
arXiv (CS.CL) 2026-06-16

LLM-based Visual Code Completion for Aerospace Geometric Design

Recent advances in both Large Language Models (LLMs) and Vision Language Models (VLMs) have seen a step change in their ability to perform visual code completion, but the aerospace industry, which prioritizes safety and explainabilty over rapid LLM adoption, currently has no publicly announced LLM-based geometric design copilot systems in commercial use by aerospace Original Equipment Manufacturers (OEMs). This paper presents a LLM-based visual programming copilot application for aerospace engineering design tasks, using a visual programming variant of the ReAct methodology and GPT 5.4. In addition to the copilot, we describe Wingbuilder, a new Grasshopper plugin library with custom components for aerospace-specific geometry abstraction, and an associated Aerospace Visual Programming Dataset (AVPD) with 18 aerospace expert designed tasks at different levels of difficulty alongside ground truth solutions. We evaluate our copilot application with a user trial involving two experienced aerospace engineers from a large aircraft manufacturing company. We find our copilot visual programming ReAct methodology was successful in generating suggestions that participants found helpful, but slow ReAct inference times limit its usefulness to more complex time-consuming tasks where waiting for good copilot solution suggestion was worthwhile. Participants reported they liked the tool and would be willing to use it in the future.

14.
arXiv (CS.AI) 2026-06-18

SAE Interventions are Unreliable: Post-Intervention Recovery of Suppressed Behavior

arXiv:2606.18322v1 Announce Type: cross Abstract: Sparse Autoencoders (SAEs) decompose residual-stream activations into interpretable features. Recent latent-space defenses increasingly rely on these decompositions, assuming that identified "unsafe" SAE features serve as actionable handles for monitoring and intervention. In this paradigm, clamping a specific harmful feature is expected to reliably prevent model misbehavior. However, we show that this success may hide a recoverable failure mode: the clamp may block one visible route to a behavior without eliminating the behavior itself. We formulate this vulnerability as post-intervention recovery, a constrained residual-space optimization problem. Starting from the post-intervention residual state, we optimize residual perturbations to recover the pre-intervention behavior while preserving the post-intervention values of the targeted SAE features. Even under a strong threat model where the intervention remains active throughout optimization and generation, recovery remains possible. To rule out that recovery simply undoes the intervention, we use encoder-orthogonal updates for single-layer interventions and the corresponding feature-map Jacobian in the cross-layer setting. Across TPP, unlearning, IOI, and refusal steering experiments, this stress test reveals recoverable behavior despite successful feature-level intervention. Especially in the safety-critical refusal-steering setting, we achieve a 95.8% recovery rate on valid samples while keeping defended-feature relative drift to 0.131, substantially below suffix-based baselines. A recovery-path attribution analysis further localizes this recovery to the SAE reconstruction residual, the component left unexplained by the SAE. These results expose a gap between feature-level control and behavioral completeness: SAE features can support causal intervention, but controlling them does not guarantee control over the underlying behavior.

15.
arXiv (CS.CV) 2026-06-12

SemanticXR: Low Power and Real-time Queryable Semantic Mapping with an Object-Level Device-Cloud Architecture

Semantic mapping is a core service that enables grounded interactions in emerging Extended Reality (XR) applications such as AI assistants and spatial object search. Deploying this capability on mobile XR devices requires a system that is open-vocabulary, real-time, and low-power. Existing approaches are compute-intensive and assume server-class resources. Cloud offloading offers a practical path, but no existing system splits semantic mapping across the device-cloud boundary or manages its communication, execution, and memory footprint. We present SemanticXR, the first device-cloud system for real-time, open-vocabulary semantic mapping and querying under XR power, bandwidth, and memory constraints. Our key insight is to elevate semantically identifiable objects to first-class units of communication, execution, and memory across the device and server. On the server, object-level parallelism and geometry downsampling improve mapping latency, while object-level depth-mapping co-design reduces upstream bandwidth. On the device, an object-level sparse local map with incremental updates and update prioritization enables network-robust querying with bounded memory and downstream bandwidth. Object-level configurable resource usage vs. quality trade-offs let applications and the system adapt mapping to application requirements and operating conditions, respectively. Against a device-cloud baseline with the same perception models, object-level organization improves server-side mapping latency by 2.2X at equal semantic quality. Depth-mapping co-design maintains upstream bandwidth under 2.5 Mbps. On the device, SemanticXR sustains sub-100 ms query latency for up to 10,000 objects even under network drops, supports tens of thousands of objects within 500 MB, and scales downstream bandwidth with map changes, not total scene size. The system adds only 2% device power during normal operation.

16.
arXiv (CS.AI) 2026-06-19

Information Lattice Learning as Probabilistic Graphical Model Structure Learning

arXiv:2606.19366v1 Announce Type: cross Abstract: Information lattice learning (ILL) learns interpretable rules of a signal by alternately projecting the signal onto a partition lattice that encodes a hierarchy of abstractions and lifting selected rules back to the signal domain. When the signal is a probability mass function, we show the probabilistic rules learned by ILL admit a natural probabilistic graphical model (PGM) interpretation and develop this interpretation in detail. A partition in ILL induces a deterministic quotient variable, and a rule is the marginal law of that quotient variable. A rule set is therefore a collection of marginal constraints over interpretable abstractions. General lifting is the feasible family of all joint distributions satisfying those constraints, while special lifting chooses a maximum-ignorance reconstruction, implemented in ILL by an L2 uniformity principle closely related to maximum entropy. Under a Shannon-entropy lifting, the same constraints yield a log-linear factor graph whose factors are indexed by learned abstractions. The information lattice itself, however, is not a Bayesian network: its edges encode refinement and coarsening of abstractions, not conditional dependence. Thus ILL is best viewed as structure learning for interpretable constraint-based factor graphs over quotient variables. This view clarifies how ILL relates to graphical models and maximum entropy models, while suggesting new directions for inference, identifiability, and hybrid symbolic-probabilistic learning.

17.
arXiv (CS.AI) 2026-06-11

LUCID: Learning Embodiment-Agnostic Intent Models from Unstructured Human Videos for Scalable Dexterous Robot Skill Acquisition

arXiv:2606.11628v1 Announce Type: cross Abstract: The most widely-adopted robot learning pipelines today learn skills from robot demonstrations or structured human data, which are expensive to collect and tied to specific embodiments. In contrast, unstructured human videos provide a scalable alternative. They contain diverse manipulation demonstrations across objects, scenes, and strategies, but are not directly connected to robot action. We propose LUCID, a two-stage framework that learns task intent from unstructured human videos drawn from internet-scale datasets and learns robot control in massively-parallel simulation. The intent model predicts short-horizon intent (what should happen next in the scene) from the current observation in closed loop. An embodiment-specific sensorimotor policy converts this intent into robot actions. The intent interface is shared across controllers, so the same intent model can be applied to different embodiments, from our primary dexterous hand to a parallel-jaw gripper. We evaluate LUCID on five real-world manipulation tasks: stirring, wiping, and binning supervised by only internet video, with zero-shot transfer to novel scenes and object instances; and push-T and cable routing supervised by 1 hr each of self-collected smartphone video. Project page: https://lucid-robot.github.io/.

18.
medRxiv (Medicine) 2026-06-22

Clinical-grade Cuffless Blood Pressure Monitoring via Deep-tissue Diffuse Speckle Pulsatile Flowmetry

Blood pressure (BP) is a vital sign which is measured to diagnose and manage hypertension. However, current methods to measure BP use inflatable cuffs which cause discomfort and limit the frequency at which measurements can be made, or intra-arterial catheters which are invasive and pose infection risks. Here, we propose and evaluate the use of Diffuse Speckle Pulsatile Flowmetry (DSPF) as a cuffless BP measurement method to address these limitations. DSPF is a laser speckle-based technique which simultaneously records blood flow rate and blood volume (i.e. photoplethysmography or PPG) signals from relatively deep vascular tissue. Using information from these signals, we studied DSPFs effectiveness in measuring systolic BP (SBP) and diastolic BP (DBP) through an outpatient study in which 133 patients were recruited, and in measuring beat-to-beat BP waveforms through an inpatient study in which two patients were recruited. In the outpatient study, the DSPF method was able to achieve mean absolute errors (MAEs) of 4.17 mmHg and 2.42 mmHg for SBP and DBP respectively compared to conventional cuff-based methods. It was also able to fulfil the requirements of the AAMI/ESH/ISO 81060-2:2018 standard for BP measurement devices and attain an "A" grade according to the British Hypertension Society grading scheme. For the inpatient study, it produced BP waveforms which had MAEs of 2.35 mmHg and 3.06 mmHg compared to arterial-line measurements for the two patients, respectively. Compared to PPG which has been studied more extensively as a cuffless BP measurement method, we found through ablation studies that DSPF was able to reach significantly lower MAEs and hence better accuracies. DSPF augments the performance of PPG-only methods by leveraging additional information from the blood flow rate signal, and we therefore find it to be a superior cuffless BP measurement method which can potentially be used in outpatient, inpatient, and remote settings.

19.
arXiv (CS.CL) 2026-06-24

The $\mathbf{P}$-Completeness of Inverted Index Traversal: On the Complexity of Evaluating Boolean Query DAGs

作者:

Modern AI agents increasingly rely on search infrastructure to execute complex, neuro-symbolic reasoning workflows. These workflows often compile into deeply nested, non-monotonic Boolean queries over text fields. However, standard query evaluation strategies over inverted indices face severe theoretical limits when handling these structures. Stateful iterator models (Document-at-a-Time) are structurally bounded by $NC^1$ formula evaluation, suffering a worst-case $O(2^{|Q|})$ exponential blowup in query complexity when unrolling re-convergent logic. Conversely, recursive materialization models (Term-at-a-Time) incur an $\Omega(|U|)$ space complexity penalty (the Universal Scan) when evaluating logical negation over the document universe. In this paper, we establish the theoretical boundaries of executing complex logic natively over an inverted index. We formalize a retrieval language ($\mathcal{L}_R$) based on Directed Acyclic Graphs (DAGs) and prove that its evaluation problem is strictly $\mathbf{P$-Complete}. To make evaluation tractable, we introduce \texttt{ComputePN}, a deterministic, sparsity-aware evaluation algorithm. By decoupling logical negation from universe-scale materialization via a novel Positive-Negative dual representation, and utilizing native DAG memoization, \texttt{ComputePN} strictly bounds evaluation time to $O(|Q| \cdot |U_{\mathit{active}}|)$. This approach successfully evaluates $\mathbf{P}$-Complete queries natively over the index, avoiding both the combinatorial tree-expansion bottleneck and the universal scan penalty, laying the formal foundation for computational retrieval.

20.
arXiv (CS.CL) 2026-06-16

Dual-Uncertainty Guided Policy Learning for Multimodal Reasoning

Reinforcement learning with verifiable rewards (RLVR) has advanced reasoning capabilities in multimodal large language models. However, existing methods typically treat visual inputs as deterministic, overlooking the perceptual ambiguity inherent to the visual modality. Consequently, they fail to distinguish whether a model's uncertainty stems from complex reasoning or ambiguous perception, preventing the targeted allocation of exploration or learning signals. To address this gap, we introduce DUPL, a dual-uncertainty guided policy learning approach for multimodal RLVR that quantifies and leverages both perceptual uncertainty (via symmetric KL divergence) and output uncertainty (via policy entropy) to guide policy updates. By establishing an uncertainty-driven feedback loop and employing a dynamic branch prioritization mechanism, DUPL recalibrates the policy advantage to focus learning on states with high perceptual or decisional ambiguity, enabling effective targeted exploration beyond passive data augmentation. Evaluated on diverse multimodal reasoning benchmarks spanning mathematical and general domains, DUPL achieves solid gains. It improves Qwen2.5-VL accuracy by up to $12.3%$ (3B) and $7.9%$ (7B), and Qwen3-VL-Instruct by up to $10.7%$ (4B) and $12.4%$ (8B), consistently outperforming GRPO, while seamlessly generalizing to alternative algorithms (DAPO, $+6.5%$ avg) and architectures (LLaVA-OneVision-1.5, $+4.7%$ avg). These results demonstrate that DUPL is an effective and generalizable approach for multimodal RLVR.

21.
arXiv (CS.CL) 2026-06-24

Do LLM Attribution Metrics Transfer? Auditing Retrieval-Augmented Generation Evaluation Across Datasets and Constructs

Practice often treats automatic metrics for attribution in LLM retrieval-augmented generation as interchangeable. We audit eight automatic scorers – lexical, embedding, and BERTScore baselines alongside entailment/grounding-trained models (clean and FEVER NLI, the checker MiniCheck) – across three evaluation constructs (provenance/topicality, generated-answer attribution, and fact-check entailment), asking whether any scorer transfers: stays within the 95% confidence interval of the best audited scorer on every dataset of a multi-dataset construct. In the construct with the most multi-dataset human-labeled coverage – generated-answer attribution (AttributionBench's four source datasets, n = 1,610, with independent HAGRID, n = 2,150) – none does: the per-dataset metric rankings invert (Kendall tau = -0.64, p = 0.031 on AttributedQA vs. LFQA), and an off-the-shelf NLI scorer that is best on short-claim AttributedQA (AUROC 0.90) collapses to AUROC 0.53 (chance) on long-form LFQA, where BERTScore wins (0.91); the flip is not a length or truncation artifact. This instability has a concrete decision cost: a naive "best-on-average" rule for choosing an evaluator fails leave-one-dataset-out (mean held-out regret 0.172 AUROC, worse than fixing one scorer), so metric choice must be validated on the target dataset rather than learned from others. A prompt-based LLM judge avoids the chance-level collapses the automatic scorers suffer (no LFQA collapse) but is not uniformly best, ~100x costlier, and non-deterministic – relocating, not removing, the validation burden.

22.
arXiv (CS.CL) 2026-06-16

ttda704 at SemEval-2026 Task 4: Modeling Narrative Structures via Pseudonymization and Multi-View Sentence Alignment

We present our approach to SemEval 2026 Task 4: Narrative Story Similarity and Narrative Representation Learning. Our solution uses contrastive learning with fine-tuned sentence transformers to capture narrative similarity across abstract themes, course of action, and outcomes. We develop two pipelines: (Track A) a single-view method that encodes full narratives with smart layer freezing to reduce overfitting, and (Track B) a multi-view method that models theme, plot, and outcome with view-specific projection heads and self-supervised alignment. Both pipelines build on sentence-transformers models and are trained with contrastive loss on synthetic data. The code is available at the following GitHub repository: https://github.com/dinhthienan33/SemEval2026-Task4-ttda704.

23.
arXiv (CS.CL) 2026-06-12

PersonaDrive: Human-Style Retrieval-Augmented VLA Agents for Closed-Loop Driving Simulation

Closed-loop driving simulators typically populate their environments with non-ego traffic agents that behave largely the same way, produced either by rule-based traffic managers or by learned models trained toward a single behavioral mode. Recent work introduces style variation through post-hoc labels on observational data or LLM-inferred reward weights, but these signals act as proxies for what a style should reward rather than demonstrations of humans explicitly asked to drive in that style. We introduce PersonaDrive, a pipeline that conditions a vision-language-action (VLA) driving agent on retrieved demonstrations from a style-instructed human driving dataset, in which participants drive CARLA leaderboard routes under aggressive, neutral, and conservative instructions on a driver-in-the-loop rig. The pipeline has three stages: (i) offline triplet mining over per-style human driving data using a combined image-text similarity score; (ii) training a lightweight retrieval head that fuses frozen visual features with a small control encoder over per-style databases; and (iii) fine-tuning a single VLA backbone to treat retrieved context points as in-context behavioral demonstrations during waypoint prediction. At inference, the same backbone is conditioned on any style by swapping which per-style database the retrieval head queries, so selecting a style requires no per-style retraining while enabling human-style, style-diverse non-ego agents for closed-loop simulation. On Bench2Drive, PersonaDrive (no style) improves the driving score by 4.6% over SimLingo and 2.5% over HiP-AD, and under style conditioning attains the highest driving score in every style within a roughly 2% band (its weakest style surpassing the strongest baseline, DMW, by 5.4%), while average speed and acceleration rise by 18% and 25% from the conservative to the aggressive instruction.

24.
arXiv (CS.LG) 2026-06-16

Towards a Unified Generative Model for Scarce Time Series with Domain Experts

arXiv:2606.15172v1 Announce Type: new Abstract: Synthesizing realistic time series with generative models has wide-ranging applications in real-world scenarios. Despite recent progress, most existing methods are trained under the assumption of abundant training data, which substantially limits their effectiveness in data-scarce settings. In this paper, we propose TimeMoDE, a novel framework that integrates Diffusion Transformers with Mixture-of-Experts to exploit both domain adaptability and diffusion-stage awareness for time series generation under data scarcity. It is pre-trained on a large-scale collection of multi-domain datasets to extract domain-agnostic temporal representations and domain-specific information benefiting generalization during fine-tuning. We propose Domain Prompts to condition expert assignment for indistinguishable noised tokens, mitigating the limitations of capturing inter-dataset relationships. Moreover, we incorporate diffusion timestep signals to equip the experts with awareness of time series degradation variations, facilitating adaptive calibrate to stage-dependent denoising requirements. Extensive experiments demonstrate that TimeMoDE outperforms existing methods under diverse low-data settings. It establishes an innovative paradigm for advanced time series few-shot generation.

25.
arXiv (CS.CV) 2026-06-24

Lite Any Stereo V2: Faster and Stronger Efficient Zero-Shot Stereo Matching

Recent advances in stereo matching have achieved remarkable accuracy, but often rely on large models, heavy computation, or additional foundation-model priors, making them difficult to deploy on resource-constrained platforms. In contrast, efficient stereo models offer faster inference but are commonly considered less capable of strong zero-shot generalization. In this paper, we challenge this assumption by introducing Lite Any Stereo V2 (LAS2), an ultra-fast model series designed for efficient zero-shot stereo matching. LAS2 is developed from both architecture and training perspectives. Architecturally, we revisit efficient stereo design under practical deployment settings and propose a 2D-only cost aggregation framework, optimized for real inference latency rather than theoretical MACs alone. For training, we develop a three-stage strategy that combines synthetic supervision, self-distillation, and real-world knowledge distillation. To improve the reliability of real-world pseudo supervision, we further introduce pseudo-label filtering and an error-clamping operation, enabling smoother synthetic-to-real transfer. We instantiate LAS2 as a family of models, including feed-forward variants for different efficiency budgets and an iterative variant for higher accuracy. Extensive experiments show that LAS2 achieves state-of-the-art accuracy among efficient stereo methods while maintaining significantly lower latency. Specifically, LAS2-H achieves stronger overall zero-shot performance than the iterative method Fast-FoundationStereo, with 1.8x and 2.7x faster inference on H200 and Orin, respectively. The project page, demos, and code are available at https://tomtomtommi.github.io/LiteAnyStereoV2/.