Academic Intelligence · Curated Daily

探索全球前沿学术脉络

AcademicHub 汇聚顶级期刊与预印本平台的实时文献。定制您的专属科研雷达,利用大语言模型自动生成交叉领域文献分析简报。

01.
arXiv (CS.LG) 2026-06-11

Online Learning for Supervisory Switching Control

arXiv:2603.14762v4 Announce Type: replace-cross Abstract: We study supervisory switching control for partially-observed linear dynamical systems. The objective is to identify and deploy a suitable controller for the unknown system by periodically selecting among a collection of $N$ candidate controllers, some of which may destabilize the underlying system. While classical estimator-based supervisory control guarantees asymptotic stability, it lacks quantitative finite-time performance bounds. Conversely, current non-asymptotic methods in both online learning and system identification require restrictive assumptions that are incompatible in a control setting, such as system stability, which preclude testing potentially unstable controllers. To bridge this gap, we propose a novel, non-asymptotic analysis of supervisory control that adapts multi-armed bandit algorithms to a control-theoretic setting. The proposed data-driven algorithm evaluates candidate controllers via scoring criteria that leverage system observability to isolate the effects of state history, enabling both detection of destabilizing controllers and accurate system identification. We present two algorithmic variants with dimension-free, finite-time guarantees, where each identifies the matching controller in $O(N \log^2 N)$ steps, while simultaneously achieving finite $L_2$-gain with respect to system disturbances.

02.
medRxiv (Medicine) 2026-06-15

Filum Terminale Diameter on Routine Pediatric MRI: A Large-Cohort Clinical Reference in 3,406 Children and the Age-Dependent Meaning of the 2-mm Thickened-Filum Threshold

Background. A filum diameter >2 mm is the conventional MRI threshold for a thickened filum, but it derives from small, mostly adult series showing no age dependence; whether one cutoff suits all of childhood is untested. Objective. To build an age-specific filum-diameter reference on routine pediatric MRI and test, adjusting for image resolution, whether the 2-mm threshold is age-stationary. Materials and methods. In this retrospective study an nnU-Net tracer measured the maximal filum diameter on consecutive lumbosacral MRI; versus manual tracing it showed negligible bias but moderate single-measure agreement. After excluding report-confirmed fatty filum, lipoma, or tethered cord, the proportion >2 mm was analysed within one acquisition protocol and by logistic regression adjusting for voxel size and slice thickness. Results. Of 7,245 examinations, 3,869 (53%) were traceable; untraced ones were younger (median 0.75 vs 2.0 years). The presumed-normal cohort had median diameter 1.48 mm. At matched resolution, 2 mm marked the 94th percentile in infants (5.6% exceeded it) but the 83rd by 3-6 years (17.4%); the age effect persisted after adjusting for voxel size and slice thickness (3-6 years vs infants, adjusted OR 4.7; P < .001). Conclusion. Filum diameter clusters near 1.5 mm, and the fixed 2-mm cutoff flags ~5% of infants but ~17% of preschoolers. Caliber should be judged against an age-specific clinical reference, not one fixed cutoff; a thick filum is not itself a diagnosis of tethered cord.

03.
arXiv (CS.AI) 2026-06-16

Surprise-Guided MergeSort: Budget-Efficient Human-in-the-Loop Ranking via Adaptive Comparison Scheduling

arXiv:2606.15623v1 Announce Type: cross Abstract: Pairwise comparison is the gold standard for subjective ranking tasks; however, exhaustive annotation requires a massive number of human comparisons ($O(n^2)$). While sorting-based methods have reduced this burden to $O(n\log n)$, they still require expensive human judgment for every single comparison. To further improve annotation efficiency, we propose leveraging a Vision-Language Model (VLM) not as an annotator replacement, but as a question prioritizer to identify which comparisons genuinely require human judgment. The proposed Surprise-Guided MergeSort (SGS) framework achieves this through three integrated components: (1) a bottom-up MergeSort scheduler that structures comparisons and exploits transitivity, (2) a composite Surprise Scorer – combining position-bias-cancelled VLM confidence, Elo gap, and vote entropy – to quantify comparison ambiguity, and (3) an adaptive budget allocator that routes high-surprise pairs to humans while automating low-surprise pairs via transitivity inference. Validation was conducted on six diverse benchmarks spanning text similarity (STS-B, BIOSSES, SICKR-STS) and image quality assessment (KonIQ-10k, TID2013, LIVE Challenge). SGS effectively identified and skipped up to 535 non-informative comparisons per session. Consequently, it achieved Kendall's $\tau{\times}100$ improvements of $+6$ to $+12$ over Active Elo under the same total budget. These results demonstrate that combining VLM-guided surprise metrics with algorithmic sorting provides a generally consistent accuracy-efficiency trade-off across diverse domains.

04.
arXiv (CS.AI) 2026-06-19

FlowMaps: Modeling Long-Term Multimodal Object Dynamics with Flow Matching

arXiv:2606.20209v1 Announce Type: cross Abstract: Joint spatial and temporal understanding of 3D scenes is a crucial requirement for robots deployed in everyday household environments. Such agents must not only comprehend and navigate spatial layouts, but also reason about how these spaces evolve over time. In particular, humans interact with objects daily, causing them to change position throughout the environment and making it difficult for robots to reliably associate current observations with previously seen objects. However, these interactions are not random: human habits and routines induce spatio-temporally consistent patterns in object locations, which robotic agents can potentially learn and then exploit for downstream tasks such as navigation. To this end, we introduce FlowMaps, a latent flow matching model for estimating multimodal distributions over the future locations of dynamic objects in a continuous 3D space. By learning the implicit dependencies among objects and their temporal evolution, FlowMaps predicts likely changes in object locations conditioned on past human interactions, while supporting generalization across previously unseen environments that share similar object routines. To demonstrate the utility of this method, we deploy FlowMaps in a downstream dynamic Object Navigation task in both simulated and real-world environments. Across more than 600 episodes, FlowMaps outperforms state-of-the-art approaches, showing that modeling object dynamics through continuous, multimodal spatio-temporal distributions improves robotic search and navigation in changing household environments. Code and additional material is available at https://fra-tsuna.github.io/flowmaps/.

05.
arXiv (CS.CV) 2026-06-16

A Survey on 3D Gaussian Splatting Applications: Segmentation, Editing, and Generation

In the context of novel view synthesis, 3D Gaussian Splatting (3DGS) has recently emerged as an efficient and competitive counterpart to Neural Radiance Field (NeRF), enabling high-fidelity photorealistic rendering in real time. Beyond novel view synthesis, the explicit and compact nature of 3DGS enables a wide range of downstream applications that require geometric and semantic understanding. This survey provides a comprehensive overview of recent progress in 3DGS applications. It first reviews the reconstruction preliminaries of 3DGS, followed by the problem formulation, 2D foundation models, and related NeRF-based research areas that inform downstream 3DGS applications. We then categorize 3DGS applications into three foundational tasks: segmentation, editing, and generation, alongside additional functional applications built upon or tightly coupled with these foundational capabilities. For each, we summarize representative methods, supervision strategies, and learning paradigms, highlighting shared design principles and emerging trends. Commonly used datasets and evaluation protocols are also summarized, along with comparative analyses of recent methods across public benchmarks. To support ongoing research and development, a continually updated repository of papers, code, and resources is maintained at https://github.com/heshuting555/Awesome-3DGS-Applications.

06.
arXiv (CS.LG) 2026-06-24

Forget Without Compromise: Nexus Sampling for Streaming KV-Cache Eviction Under Fixed Budgets

arXiv:2606.23961v1 Announce Type: new Abstract: Long-context and agentic LLM workloads push the KV cache past any fixed memory budget, forcing the inference stack to permanently evict tokens at every step of a continuous-inference stream. Existing methods all share the same template, a per-step direct-attention score followed by deterministic top-$K$ selection, which converts a single below-cutoff step into an irreversible verdict and permanently erases any subtly important token that direct attention cannot single out from noise. To address this challenge, we propose Nexus Sampling, a training-free eviction method that pairs Nexus scoring, an iterative walk over direct attention that surfaces bridge tokens, with weighted reservoir sampling, which retains tokens with inclusion probability in place of deterministic top-$K$. Theoretically, we show that Nexus Sampling dominates deterministic top-$K$ in long-run survival of subtly important tokens. Empirically, at 80% KV cache eviction, Nexus Sampling matches dense attention within 1% on LongBench while outperforming top-$K$ baselines on retrieval-heavy tasks, with up to 10x smaller per-sequence cache memory.

07.
arXiv (CS.AI) 2026-06-19

Protein Representation Learning with Secondary-Structure and Energy-Filtered Hydrogen-Bond Graphs

arXiv:2606.19374v1 Announce Type: cross Abstract: Graph-based representations are widely used in protein modeling, yet many existing approaches rely primarily on sequence adjacency or geometric proximity, which only partially reflect the principles governing protein folding. Proteins instead adopt complex three-dimensional conformations organized around secondary structure elements, such as $\alpha$-helices and $\beta$-sheets, which encode recurring local motifs and stabilizing hydrogen-bond interactions. In this work, we introduce a secondary-structure-aware graph neural network for protein representation learning. Residue-level node representations are augmented with secondary structure assignments, and graph edges are constructed from hydrogen-bond interactions filtered by their energetic strength. This design enables the model to capture both local structural context and long-range couplings that are central to protein stability and function. We evaluate the proposed approach on commonly used protein benchmarks and observe consistent improvements over existing graph-based methods. In addition, the resulting graph representations offer enhanced biological interpretability, as the learned connectivity aligns with established structural motifs. These findings suggest that incorporating secondary structure and energy-filtered hydrogen-bond topology provides an effective inductive bias for protein representation learning. The code is released at https://github.com/mohamedmohamed2021/SSProNet

08.
medRxiv (Medicine) 2026-06-22

Disentangling adiposity-related and non-adiposity-related genetic pathways for type 2 diabetes

OBJECTIVE To identify circulating proteins associated with type 2 diabetes (T2D) risk through pathways not fully explained by body mass index (BMI), and to assess therapeutic actionability. RESEARCH DESIGN AND METHODS We applied GWAS-by-subtraction within a genomic structural equation model to European ancestry summary statistics for T2D (74,124 cases, 824,006 controls) and BMI (n = 681,275), partitioning T2D liability into BMI-related and BMI-subtracted components. We then performed proteome-wide Mendelian randomization (MR) using cis-protein quantitative trait loci from four plasma proteomics cohorts: ARIC, deCODE, Fenland, and the UK Biobank Pharma Proteomics Project. Prioritized proteins passed sensitivity analyses with alternative MR methods and were supported by colocalization evidence. Tissue-resolution regulatory support was assessed using cis-eQTL colocalization across GTEx and pancreatic islet, subcutaneous adipose, and whole-blood resources. Actionability was evaluated using the druggable genome and Open Targets. RESULTS GWAS-by-subtraction attenuated the genetic correlation between BMI and BMI-subtracted T2D from 0.54 (SE 0.02) to 0.35 (SE 0.02). Proteome-wide MR prioritized 29 proteins for BMI-subtracted T2D. Thirteen showed eQTL colocalization in at least one tissue, implicating liver and intermediary metabolism (GCDH, NOTCH2), pancreatic islet biology (CTRB2, MANBA), adipose and Wnt signaling (RSPO3, GALNT3), and whole blood regulatory signals (PAM, SNUPN). Sixteen proteins were classified within druggable-genome Tiers 1-3, and five had existing Open Targets compounds. CONCLUSIONS Integrating GWAS-by-subtraction, proteome-wide MR, and colocalization nominated 29 proteins associated with T2D liability not fully explained by BMI. These findings highlight genetically supported targets for follow-up studies of T2D therapies that complement weight-centered approaches.

09.
arXiv (CS.CV) 2026-06-16

SurroundNEXO: Ego-Centric Metric Bridging for Spatially Consistent Geometry in Autonomous Driving

Modern autonomous driving depends on accurate metric 3D understanding for perception, reconstruction, and planning, which in turn requires reliable multi-camera depth prediction. However, the outward-facing nature of vehicle-mounted surround-view camera rigs inherently limits visual overlap across views, challenging the correspondence-based assumptions that underpin conventional multi-view geometry. To bridge this gap, we present SurroundNEXO, named after the Spanish word nexo for a geometric link, a low-overlap multi-camera metric depth framework that grounds cross-view reasoning in ego-centric geometry rather than dense visual correspondences. Instead of directly enforcing early global fusion, SurroundNEXO first assigns image tokens globally comparable ego-frame viewing directions through Ego-Ray Positional Encoding, then uses sparse LiDAR measurements as metric anchors to propagate absolute scale cues, and finally expands feature interaction progressively from view-local modeling to decomposed spatio-temporal reasoning and global integration. This design enables metric-scale depth prediction with improved spatial consistency across weakly overlapping cameras. Across low-overlap autonomous driving benchmarks, including NuScenes, Waymo and DDAD, SurroundNEXO reduces single-view error by 33.2%, improves cross-view consistency by 10.5%, and enhances metric reconstruction quality by 25.6% compared with SOTA methods. It further remains robust under extremely sparse depth prompts and exhibits strong zero-shot generalization to unseen camera layouts.

10.
arXiv (CS.CL) 2026-06-11

Grammar-Constrained Decoding Can Jailbreak LLMs into Generating Malicious Code

Large Language Models (LLMs) are increasingly used for code generation, raising concerns that they may be misused to produce malicious code. Meanwhile, Grammar-Constrained Decoding (GCD) has been widely adopted to improve the reliability of LLM-generated code by enforcing syntactic validity. In this paper, we reveal a counterintuitive risk: this reliability-oriented technique can itself become an attack surface. We uncover a new jailbreak attack, termed CodeSpear, that exploits GCD to induce LLMs into generating malicious code. Our experiments show that simply applying a benign code grammar constraint can effectively jailbreak LLMs. To address this vulnerability, we propose CodeShield, a safety alignment approach that robustly preserves safe behavior even under attacker-controlled grammar constraints. CodeShield aligns the model in the code modality by teaching it to generate honeypot code under GCD. Such code is semantically harmless, so it does not implement the malicious request, and structurally diverse, so it is difficult to suppress through grammar tightening. At the same time, CodeShield still preserves natural-language refusals when natural language is available. Experiments on 10 popular LLMs across 4 benchmarks show that CodeSpear outperforms representative jailbreak baselines and increases the attack success rate by more than 30 percentage points on average. CodeShield also restores safety under CodeSpear while preserving benign utility. Our findings reveal a fundamental risk of GCD and call for greater attention to its potential security implications.

11.
medRxiv (Medicine) 2026-06-22

Clinical-grade Cuffless Blood Pressure Monitoring via Deep-tissue Diffuse Speckle Pulsatile Flowmetry

Blood pressure (BP) is a vital sign which is measured to diagnose and manage hypertension. However, current methods to measure BP use inflatable cuffs which cause discomfort and limit the frequency at which measurements can be made, or intra-arterial catheters which are invasive and pose infection risks. Here, we propose and evaluate the use of Diffuse Speckle Pulsatile Flowmetry (DSPF) as a cuffless BP measurement method to address these limitations. DSPF is a laser speckle-based technique which simultaneously records blood flow rate and blood volume (i.e. photoplethysmography or PPG) signals from relatively deep vascular tissue. Using information from these signals, we studied DSPFs effectiveness in measuring systolic BP (SBP) and diastolic BP (DBP) through an outpatient study in which 133 patients were recruited, and in measuring beat-to-beat BP waveforms through an inpatient study in which two patients were recruited. In the outpatient study, the DSPF method was able to achieve mean absolute errors (MAEs) of 4.17 mmHg and 2.42 mmHg for SBP and DBP respectively compared to conventional cuff-based methods. It was also able to fulfil the requirements of the AAMI/ESH/ISO 81060-2:2018 standard for BP measurement devices and attain an "A" grade according to the British Hypertension Society grading scheme. For the inpatient study, it produced BP waveforms which had MAEs of 2.35 mmHg and 3.06 mmHg compared to arterial-line measurements for the two patients, respectively. Compared to PPG which has been studied more extensively as a cuffless BP measurement method, we found through ablation studies that DSPF was able to reach significantly lower MAEs and hence better accuracies. DSPF augments the performance of PPG-only methods by leveraging additional information from the blood flow rate signal, and we therefore find it to be a superior cuffless BP measurement method which can potentially be used in outpatient, inpatient, and remote settings.

12.
arXiv (quant-ph) 2026-06-11

Nonlocal continuous-variable gates by amplified optical connections

arXiv:2603.12866v2 Announce Type: replace Abstract: Nonlocal quantum gates, coupling quantum systems located at a distance, are crucial for distributed quantum computing. To this aim, high-capacity optical noiseless connections between different processing units are essential for transmitting large amounts of information per mode. Simultaneously, optical quantum computing offers future high-speed multimode quantum processors. We propose a library of feasible protocols to implement a necessary nonlocal continuous-variable (CV) quantum nondemolition (QND) gate between two distant users sharing a quantum channel and exploiting classical communication. The users are endowed with a newly achieved high-fidelity and large-bandwith element - single-pass phase-sensitive optical parametric amplifier (OPA), that allows for both online squeezing and channel-loss compensation. The use of OPAs enhances quality of the resulting gate in terms of both excess noise and entangling capability. The proposed schemes are also applicable to CV cluster state fusion, providing a first step towards development of distributed CV measurement-based quantum computation.

13.
arXiv (CS.AI) 2026-06-16

The Model Knows, the Decoder Finds: Future Value Guided Particle Power Sampling

arXiv:2605.02427v3 Announce Type: replace Abstract: A recurring pattern in "reasoning without training" is that base LLMs already assign non-trivial probability mass to correct multi-step solutions; the bottleneck is locating these modes efficiently at inference time. Power sampling provides a principled way to bias decoding toward such modes by targeting p_theta(x)^alpha with alpha > 1, but practical approximations must account for future-dependent correction factors that determine which prefixes remain promising. We introduce Auxiliary Particle Power Sampling (APPS), a blockwise particle algorithm for approximating the sequence-level power target with a bounded population of partial solutions. APPS propagates hypotheses in parallel using proposal-corrected power reweighting and refines their survival through future-value-guided selection at resampling boundaries. This redistributes finite compute across competing prefixes rather than committing to a single unfolding path, while providing a direct scaling knob in the particle count and predictable peak memory. We instantiate the future-value signal with short-horizon rollouts and also study an amortized variant that replaces rollouts with a lightweight learned selection head. AMore broadly, APPS improves the accuracy–runtime trade-off of training-free decoding, further supporting the view that inference-time power approximation can recover gains often attributed to post-training.

14.
arXiv (CS.CV) 2026-06-11

An Electric Potential-Augmented Benchmark Dataset for Physics-Guided Image Reconstruction of Electrical Capacitance Tomography

While deep learning has significantly advanced image reconstruction of Electrical Capacitance Tomography (ECT), most data-driven methods map directly between capacitance and permittivity distribution, treating the sensor as a black box. This overlooks the electric potential field – the fundamental physical link governing the nonlinear and ill-posed ``soft-field'' effect. To address this, we propose an electric potential-augmented ECT benchmark dataset designed to explicitly integrate latent physics behind ECT into the learning process. Generated via a COMSOL-MATLAB pipeline for an eight-electrode sensor as an example, the dataset comprises 20,000 randomized samples across four typical flow patterns. Crucially, alongside the conventional capacitance vectors and permittivity distributions depicted as images, each sample preserves eight excitation-wise full-field potential maps. Beyond data release, we provide illustrative evaluation protocols for both forward and inverse problems of ECT. Through comprehensive testing on both in-distribution (IID) and out-of-distribution (OOD) scenarios, we systematically demonstrate how the inclusion of electric potential maps enhances modeling accuracy and robustness. Fundamentally, the explicit inclusion of latent field information significantly lowers the barrier to integrating physical laws into ECT modeling, thereby establishing a standardized foundation for future physics-guided machine learning of ECT image reconstruction.

15.
arXiv (CS.CV) 2026-06-16

Latent Space Reinforcement Learning for Inverse Material Estimation in Food Fracture Simulation

Realistic visual simulation of food manipulation requires accurate material parameters, yet these are difficult to measure directly and vary across the heterogeneous regions of a single food item. We address the inverse problem of estimating material parameters from a target description of fracture behavior in a non-differentiable continuum damage mechanics simulator. Using orange peeling as a test case, we train a neural surrogate on 2,000 forward simulations and compare Covariance Matrix Adaptation Evolution Strategy (CMA-ES, a gradient-free evolutionary optimizer) with Proximal Policy Optimization (PPO, a reinforcement learning algorithm) across the original 9-dimensional parameter space and two learned 4-dimensional latent representations. Since different oranges have different material properties, a practical inverse system must handle arbitrary targets without retraining. We train a goal-conditioned PPO policy that learns a general inverse mapping: given any target description of peeling behavior, the policy produces a material parameter estimate in a single forward pass (8 surrogate evaluations, approximately 10ms). Operating in a normalizing flow latent space with a shared surrogate evaluator, the goal-conditioned policy achieves 0.642 actual recovery when validated through the simulator, outperforming the original parameter space by 23%. A warm-start extension that initializes CMA-ES refinement from the policy's output further improves recovery to 0.828 with 540 evaluations. These findings provide a practical framework for inverse food physics and lay groundwork for vision-driven material identification from video observations of food manipulation.

16.
arXiv (CS.CV) 2026-06-16

PPDM: Pixel Puzzling Diffusion Model for Speed and Memory Efficient Volumetric Medical Image Translation

Diffusion models have demonstrated superior fidelity for medical image-to-image translation, but their extension to high-resolution 3D volumes is severely constrained by prohibitive computational cost and GPU memory requirements. Existing memory-efficient strategies often compromise global volumetric consistency or fine anatomical detail. In this work, we propose the Pixel Puzzling Diffusion Model (PPDM), a simple and effective framework for memory- and speed-efficient 3D medical image translation. PPDM introduces a reversible pixel puzzle-unpuzzle operator that trades spatial resolution for channel dimensionality, substantially reducing activation memory while preserving global context. To further improve efficiency and stability, we adopt a direct bridge diffusion formulation that starts from the conditional input rather than pure noise, enabling the model to focus on task-relevant residuals. In addition, a puzzle-gradient loss is incorporated to enforce spatial coherence and suppress grid-like artifacts introduced by spatial rearrangement. We evaluate PPDM on multiple challenging 3D medical image translation tasks, including low-count PET denoising, joint PET denoising and attenuation correction, and cross-modal MRI translation. Across all tasks, PPDM consistently matches or outperforms full 3D diffusion models while reducing training GPU memory usage by up to an order of magnitude and significantly accelerating inference, and it outperforms existing memory-efficient diffusion approaches based on latent compression or frequency decomposition. These results demonstrate that PPDM provides a practical and scalable solution for high-fidelity 3D diffusion-based medical image translation under limited computational resources.

17.
arXiv (CS.LG) 2026-06-11

Apertus LLM Family Expansion via Distillation and Quantization

arXiv:2605.29128v2 Announce Type: replace Abstract: The wide adoption of LLMs has led to their use in great variety of applications and scenarios, such as chatbot assistants and data annotation, creating the need for the models to satisfy certain budget and hardware constraints. This has led to the trend of LLMs being released in batches consisting of similar models of various sizes for the family of models to adhere to as wide of a range of constraints as possible. In this paper, we validate distillation and quantization as a cost-effective way to expand model families to new sizes and hardware formats. Based on the open-recipe Apertus 8B LLM, we produce Apertus-v1.1 - a distilled family of models with up to 4B parameters trained on 1.7T permissive license tokens. We demonstrate cost-efficiency and strong accuracy performance of our approach for covering large ranges of hardware and systems requirements.

18.
arXiv (CS.CV) 2026-06-11

AerialClaw: An Open-Source Framework for LLM-Driven Autonomous Aerial Agents

Unmanned aerial vehicles (UAVs) are increasingly used in inspection, search and rescue, environmental monitoring, and emergency response. However, most UAV applications still rely on pre-defined command sequences or task-specific pipelines, where developers manually connect perception, planning, flight control, simulation, logging, and safety modules. This limits the flexibility, reproducibility, and extensibility of autonomous aerial systems. This paper presents AerialClaw, an open-source software framework that enables UAVs to operate as decision-making aerial agents rather than merely command-following platforms. Given a natural-language mission, AerialClaw allows an LLM-based agent to understand the task, maintain context, invoke executable aerial skills, observe perception and runtime feedback, and iteratively update its decisions in a closed loop. The framework adopts a modular brain-skill-runtime architecture, combining hard skills for atomic UAV operations, Markdown-based soft skills for reusable task strategies, document-driven agent state and capability boundaries, memory-driven reflection, safety-oriented runtime validation, and platform-agnostic execution adapters. AerialClaw supports lightweight mock execution, PX4 SITL with Gazebo, and AirSim-based simulation, together with a web console, pluggable model backends, example missions, simulation assets, and staged deployment scripts. By combining standardized aerial skills, document-driven agent state, memory, and closed-loop LLM decision-making, AerialClaw provides a reproducible and extensible open-source framework for building UAV systems that can interpret missions, make decisions, execute skills, and adapt their behavior from feedback.

19.
arXiv (CS.CV) 2026-06-11

Natural-Language Temporal Grounding in Hour-Long Videos is a Search Problem: A Benchmark and Empirical Decomposition

Temporal grounding–returning the interval $[t_s, t_e]$ for a natural-language query over a video–is the language interface to long-form video, yet has been studied on short videos; the dynamics of hour-scale natural-language grounding remain underexplored. We take the position that at hour-scale, the binding constraint is search, not recognition: Video-LLMs are bottlenecked not by localizing a nearby event, but–given a natural-language query–by searching for the relevant region of a long video. To test this, we release ExtremeWhenBench, the first open hour-scale grounding benchmark (2,273 queries over 194 videos, mean 75.7 min, max 9 hr) with an open-form query distribution. Every open Video-LLM collapses while a frame-level retrieval baseline outperforms them; a failure taxonomy attributes 85% of failures to search; and a retrieve-then-ground hybrid recovers 6.7x over the monolithic Video-LLM–mirroring retrieve-then-read in open-domain QA.

20.
arXiv (CS.CV) 2026-06-16

Sustainable Face Recognition on Low-Power Devices with VQ-VAE Embeddings

Face recognition has become a cornerstone of modern AI applications, yet conventional approaches often rely on computationally intensive models deployed in cloud environments, leading to increased network traffic, high energy consumption, and a heavy carbon footprint. This work introduces a sustainable, edge-deployable face recognition framework based on Vector-Quantized Variational Autoencoders (VQ-VAE), which generates compact and semantically rich latent representations of facial images. By leveraging the compression capacity and reconstruction quality of VQ-VAE embeddings on the edge and combining them with the power of pre-trained face embeddings in a knowledge distillation setup, our system achieves comparable accuracy to state-of-the-art face embedding models while significantly reducing memory and computation requirements on the edge, making it suitable for low-power edge devices. The integration of VQ-VAE compression minimizes network overhead while keeping the matching accuracy high by retaining only the most informative facial features in the latent space. As a result, the reconstructed images preserve the key identity characteristics, improving the robustness and overall performance of the face embeddings.

21.
arXiv (CS.AI) 2026-06-16

Trust Without Trusting: A Recomputable Trust Protocol for Autonomous Agents

arXiv:2605.06738v2 Announce Type: replace-cross Abstract: Autonomous AI agents already transact at production scale – 69,000 bots, 165 million transactions, $50 million in volume on a single marketplace – and any party can verify a signed credential without a central service. In an open agent world that covers most of what trust requires: there are no universal borders, and each party chooses for itself whom to deal with. Borders appear only where a closed space draws one – a marketplace, a platform, or a consortium sets house rules. Whoever draws the border holds the authority to apply it, and may apply it as they choose, behind closed doors. This paper addresses the gap that opens there: when you rely on someone else's border, how do you check that they applied their own published rules – taking no one's word for it, and handing the check to no new trusted party? Our answer is the Combined Evidence Protocol (CEP): a five-condition predicate any party recomputes from anchored data, turning "did the boundary-owner follow its own admission rules" into a fact anyone verifies rather than a claim anyone believes. The move that secures optimistic rollups secures this – correctness rests on recomputation, so the measurement belongs to everyone and the oracle problem dissolves. Its load-bearing setting is a consortium of co-equal, mutually distrusting peers under a shared charter, each able to verify, independently, that the rules they jointly agreed are the rules being applied. CEP belongs to the family of trustless systems – optimistic and zero-knowledge rollups, verifiable ML, self-sovereign-identity predicates. The infrastructure beneath it is live: a W3C VC + DID trust layer running since March 2026, anchored on Base L2, continuing arXiv:2605.06738 and standing on its own.

22.
arXiv (CS.CL) 2026-06-12

Two Wrongs, No Right: Auditing Social-Desirability Bias in LLM Annotators for Computational Social Science

作者:

LLM annotators are increasingly used in computational social science (CSS), but it is unclear whether their alignment-shaped errors preserve the empirical conclusions a researcher would report. We audit three open-source 7B instruction-tuned models (Zephyr, Mistral-Instruct, Qwen2.5-Instruct) across six TweetEval tasks under four prompt conditions (72 cells) and find that social-desirability failures do not run in a single direction. Zephyr exhibits leniency bias, systematically under-applying harmful labels (offensive language: false benign rate 0.729, false alarm rate 0.031). Mistral and Qwen exhibit overcorrection, over-applying the same labels (Mistral hate-speech FAR = 0.604). All three models exhibit neutrality bias on abortion stance, underestimating opposition prevalence by 24 to 40 percentage points and inflating the neutral label. None of the four prompting interventions we test (neutral, safety framing, depersonalized, chain-of-thought) corrects these failures across models; safety framing can worsen stance distortion. Strikingly, Zephyr's hate-speech prevalence estimate matches the gold rate exactly while its class-conditional errors are large in both directions, an accidental cancellation that misleads aggregate validation. We translate these patterns into a three-part taxonomy with diagnostic FBR/FAR signatures and a lightweight gold-sample validation protocol. The headline for trustworthy CSS: a model that looks calibrated on aggregate metrics can still flip the substantive empirical conclusion a researcher would report.

23.
arXiv (CS.LG) 2026-06-24

New Bounds for the Last Iterate of the Stochastic subGradient Method

arXiv:2606.24879v1 Announce Type: cross Abstract: We study the last iterate of the stochastic subgradient method for one-dimensional convex Lipschitz objectives. For a fixed horizon $n$, we consider the standard fixed stepsizes $\eta =\Theta(1/\sqrt n)$. We prove that, for such stepsize policies, under additive i.i.d. subgradient noise with uniformly bounded variance, the last iterate features an optimization error of order $1/\sqrt n$, thereby removing the extra $(\log n)$ factor present in existing generic bounds. On the other hand, we show that without the i.i.d. assumption, the optimization error can be of order $(\log n)/\sqrt n$. Thus, under the uniformly bounded variance assumption alone, the last iterate of SsGM is suboptimal even in dimension one, resolving negatively an open problem posed in Koren and Segal, COLT, 2020.

24.
arXiv (CS.LG) 2026-06-18

Data-driven sparse identification of governing PDEs via knockoff filters and multi-criteria trade-offs

arXiv:2605.26631v2 Announce Type: replace-cross Abstract: We propose KO-PDE-IDENT, a data-driven framework for identifying parsimonious partial differential equations (PDEs) with false discovery rate (FDR) control. PDE discovery from noisy observations is often hindered by extreme multicollinearity among candidate terms, which causes typical sparse-regression methods to select spurious terms. To address this problem, KO-PDE-IDENT initially mines a support set of potential candidate terms via model-X knockoff filters with finite-sample FDR control, then refines and ranks the surviving PDE alternatives. The framework integrates three components. First, knockoff feature statistics are constructed by coupling $\ell_{0}$-constrained adaptive best-subset selection with SHapley Additive exPlanations (SHAP), yielding an effective and computationally efficient difference statistic. Second, a recursive feature elimination (RFE) procedure removes terms whose marginal contributions are dispensable and assesses statistical necessity through knockoff-perturbed hypothesis testing. Third, the final model selection is formulated as a multi-criteria decision-making (MCDM) problem, where the optimal governing equation is the alternative that best balances a wide range of criteria such as predictive accuracy, model complexity and coefficient uncertainty. We evaluate KO-PDE-IDENT on five canonical PDEs under severe noise corruption. Empirical results show that our framework can exactly recover the true PDE structure, eliminating false discoveries while retaining all true underlying terms, with low coefficient estimation error.

25.
arXiv (CS.CV) 2026-06-11

RSTR: Reducing SpatioTemporal Redundancy in Diffusion Transformers

Diffusion Transformers (DiTs) have achieved remarkable success in image generation, yet their deployment is hindered by high computational costs. We identify two sources of redundancy. First, temporal redundancy: Classifier-Free Guidance (CFG) applies costly dual forward passes at every timestep, yet guidance matters only at specific steps, and variable scales at critical steps can compensate for skipping others. Second, spatial redundancy: under variable guidance, different transformer blocks exhibit heterogeneous sensitivity, yet uniform calibration across all blocks wastes computation while failing to address their varying requirements. We present RSTR, the first framework to jointly reduce spatiotemporal redundancy in diffusion transformers. Stage-1 addresses temporal redundancy through evolutionary search, discovering sparse guidance schedules with variable scales. Stage-2 addresses spatial redundancy through adaptive rank allocation, assigning calibration capacities to transformer regions based on their sensitivity. Experiments on DiT-XL/2, PixArt-$\alpha$, FLUX, and state-of-the-art Qwen-Image demonstrate 50%-70% compute savings while maintaining or improving quality. On DiT-XL/2, RSTR achieves 57% savings with 15% FID improvement; on Qwen-Image, 3.43$\times$ speedup with preserved quality.