Academic Intelligence · Curated Daily

探索全球前沿学术脉络

AcademicHub 汇聚顶级期刊与预印本平台的实时文献。定制您的专属科研雷达,利用大语言模型自动生成交叉领域文献分析简报。

01.
arXiv (CS.CV) 2026-06-17

ProCUA-SFT Technical Report

Training computer-use agents (CUAs) – models that interact with graphical desktops through screenshots and keyboard/mouse actions – requires large-scale, diverse trajectory data collected in full desktop environments. The largest public resource, AgentNet (22.5K human trajectories), leads to negative transfer when used for supervised fine-tuning (SFT): continuing training UI-TARS 7B on AgentNet causes OSWorld success rate to fall from 26.3% to 8-10%. We present ProCUA-SFT, a dataset of 3.1M step-level SFT samples distilled from 93K synthetic trajectories across 2,484 application combinations. The dataset is produced by a fully automated pipeline that (i) synthesizes grounded tasks on live desktops seeded with real-world content – 912 spreadsheets from SpreadsheetBench, approximately 10K permissively-licensed presentations from Zenodo10K, and multi-application OSWorld configs – and (ii) verifies each task's feasibility through binary precondition checking before rollout. A single VLM (Kimi-K2.5) serves as goal generator, precondition judge, and trajectory executor, eliminating planner-actor capability gaps. Each trajectory is expanded into step-prefix samples that exactly reproduce the context layout seen at inference time. Fine-tuning UI-TARS 7B on ProCUA-SFT for one epoch yields 45.0% on OSWorld – an 18.7 percentage-point improvement over the base model and over 35% above AgentNet-trained counterparts. A subset of ProCUA was incorporated into the training data for the Nemotron 3 Nano Omni model, contributing to its computer-use capabilities.

02.
arXiv (CS.AI) 2026-06-16

TS-Memory: Plug-and-Play Memory for Time Series Foundation Models

arXiv:2602.11550v2 Announce Type: replace-cross Abstract: Time Series Foundation Models (TSFMs) achieve strong zero-shot forecasting through large-scale pre-training, but adapting them to downstream domains under distribution shift remains challenging. Existing solutions face a trade-off: Parametric Adaptation can cause catastrophic forgetting and requires costly multi-domain maintenance, while Non-Parametric Retrieval improves forecasts but incurs high inference latency due to datastore search. We propose Parametric Memory Distillation and implement it as TS-Memory, a lightweight memory adapter that augments frozen TSFMs. TS-Memory is trained in two stages. First, we construct an offline, retrieval-leakage-safe kNN teacher that synthesizes confidence-aware quantile targets from retrieved futures. Second, we distill this retrieval-induced distributional correction into a lightweight memory adapter via confidence-gated supervision. During inference, TS-Memory fuses memory and backbone predictions with constant-time overhead, enabling retrieval-free deployment. Experiments across diverse TSFMs and benchmarks demonstrate consistent improvements in both point and probabilistic forecasting over representative adaptation methods, with efficiency comparable to the frozen backbone. Code: https://github.com/sisuolv/TS-Memory.

03.
arXiv (CS.CV) 2026-06-19

DeepForestVisionV2: Ecology-Driven Taxonomy Expansion for Camera-Trap Monitoring in African Tropical Forests

Camera-trap monitoring in African tropical forests increasingly extends beyond closed-canopy interiors to riverbanks, clearings, and park edges. Among available open tools for African forest camera-trap classification, DeepForestVision is the only one providing a matched offline workflow for both photographs and videos, and previous work showed that it outperformed other available baselines on a comparable benchmark. However, it was designed for closed-canopy, ground-level forest interiors and uses a 35-class prediction space that becomes too coarse when deployments encounter arboreal primates, birds, semi-aquatic taxa, or human-associated confounders such as livestock. We present DeepForestVisionV2, an ecology-driven expansion from 35 to 64 prediction classes (61 animal classes plus human, vehicle, and blank) designed to address three recurrent deployment gradients: vertical stratification, scene openness, and anthropogenic interfaces. DeepForestVisionV2 retains the same offline workflow and is trained on 1,535,010 photographs and 243,354 videos from multi-country African tropical-forest projects. Evaluation combines a cross-country cropped-photo validation set, used to assess robustness across sites and camera-trap settings, with three held-out Uganda video benchmarks spanning the targeted gradients. On the validation set, DeepForestVisionV2 reaches 0.86 accuracy, 0.82 macro-F1, and 0.81 balanced accuracy. On the deployment benchmarks, it preserves or improves baseline accuracy despite its harder classification task, while increasing the number of identified taxa from 22 to 29 in forest-interior videos and from 4 to 9 at riverbanks. In the park-edge use case, it raises accuracy from 0.62 to 0.86 and reduces false alarms from 11 to 0. These results show that DeepForestVisionV2 materially improves field utility while preserving robustness across sites, habitats, and camera-trap settings.

04.
arXiv (CS.CV) 2026-06-16

EdgeZSAD: Practical Zero-Shot Anomaly Detection on Edge Devices

Industrial inspection needs zero-shot anomaly detection (ZSAD) that remains useful under edge deployment constraints. Recent methods often rely on ViT-L foundation backbones (~300M parameters), which exceed the memory and operator budget of typical embedded hardware. We study this regime through EdgeZSAD, a compact reference system built around a TinyViT-21M-512 backbone, an asymmetric global-local readout (EdgeGLR), and a reproducible source-side training recipe (Real-IAD-DR). We train a single checkpoint in a source-trained, target-unseen protocol and evaluate it across six industrial benchmarks. Across three independent runs, the resulting model reaches an average image AUROC of 91.6 on MVTec-AD and 88.2 on VisA, while remaining directly deployable on Jetson Orin Nano Super (TensorRT FP16) and RB5 Gen2 (QNN GPU FP16). Across the six device-rescored benchmarks, image-AUROC drift stays below 0.2 points, indicating that the exported graph preserves host-side ranking behavior in the evaluated deployment setting.

05.
arXiv (quant-ph) 2026-06-16

Orbital-optimized spin-adapted multistate contracted VQE for excited states and properties on quantum hardware

arXiv:2606.15489v1 Announce Type: new Abstract: We introduce the orbital-optimized multistate contracted variational quantum eigensolver (oo-MC-VQE) method with spin-adapted operators for the computation of ground and excited states, as well as state-specific and transition properties. The use of spin-adapted operators ensures that the spin symmetry of the reference states is conserved throughout the VQE optimization. In multistate variational approaches, achieving a balanced description of an increasing number of electronic states places growing demands on the expressibility of the underlying ansatz, thereby introducing a fundamental trade-off between accuracy and circuit complexity. We consider the effects of this trade-off explicitly and find that the number of circuit parameters required to obtain accurate results is reported to scale approximately linearly in the number of states. We further present an explicit quantum-circuit implementation of the oo-MC-VQE method and demonstrate its integration with quantum error mitigation techniques. Finally, we execute the method on real quantum devices to compute absorption spectra for two benchmark molecular systems.

06.
arXiv (CS.CV) 2026-06-12

Learning Task-Aware Sampling with Shared Saliency through Density-Equalizing Mappings

In image and surface-based learning tasks, convolutional features are typically extracted using receptive fields that are sampled uniformly across the entire domain. However, informative structures are rarely distributed uniformly in practice and are often concentrated in localized regions. Such phenomena are particularly common in medical imaging, where pathological changes are spatially confined. Consequently, uniform convolution allocates equal computational effort to both informative and uninformative regions, resulting in inefficient feature extraction and suboptimal utilization of model capacity. To address this issue, we propose a framework for task-adaptive sampling that dynamically redistributes computational attention according to the spatial importance of the data. Specifically, we introduce the Density-Equalizing Convolutional Neural Network (DECNN), which employs density-equalizing mappings to guide convolution through a learned density function. The density function encodes the relative importance of different regions and induces a transformation that enlarges informative areas while compressing less relevant ones. As a result, convolutional receptive fields are redistributed non-uniformly over the domain, enabling denser sampling in task-relevant regions. By coupling this importance-driven transformation with convolution, DECNN performs adaptive feature extraction that focuses computational resources on informative structures. This leads to more efficient use of model capacity, yielding a lightweight yet expressive architecture while simultaneously producing an interpretable saliency map. Experiments on image classification and craniofacial surface analysis demonstrate that DECNN achieves competitive or superior performance with fewer parameters, accurately identifies task-relevant regions, and remains robust under complex geometric variations.

07.
arXiv (CS.LG) 2026-06-16

OptEMA: Adaptive Exponential Moving Average for Stochastic Optimization with Zero-Noise Optimality

作者:

arXiv:2603.09923v4 Announce Type: replace Abstract: Exponential moving averages (EMAs) are a central component of widely used adaptive optimizers such as Adam. However, existing analyses of Adam-style methods often yield suboptimal guarantees in the zero-noise regime, rely on open-loop parameter schedules, or require prior knowledge of smoothness constants. Motivated by these limitations, we introduce OptEMA and analyze two complementary variants: OptEMA-M, which applies an adaptive, decreasing EMA coefficient to the first moment with a fixed second-moment decay, and OptEMA-V, which swaps these roles. At the heart of these variants is a Corrected AdaGrad-Norm coefficient schedule. This formulation renders OptEMA algorithmically closed-loop and Lipschitz-free, meaning its effective stepsizes are trajectory-dependent and require no parameterization via the Lipschitz constant. Under lower-boundedness, unbiasedness, bounded variance, average smoothness, and a bounded stochastic-gradient condition used to control the adaptive normalizers, we prove that both variants achieve the unified noise-adaptive rate $\tilde{\mathcal{O}} \left(T^{-1/2}+\sigma^{1/2}T^{-1/4}\right)$ for the averaged gradient norm. In the zero-noise regime, these bounds automatically reduce to the nearly optimal deterministic rate $\widetilde{\mathcal{O}}(T^{-1/2})$ without manual hyperparameter retuning.

08.
arXiv (CS.AI) 2026-06-11

LaQual: An Automated Framework for LLM App Quality Evaluation

arXiv:2508.18636v2 Announce Type: replace-cross Abstract: Representing a new paradigm in software distribution, LLM app stores are rapidly emerging, offering users diverse choices for content generation, coding assistance, education, and more. However, current ranking and recommendation mechanisms in LLM app stores predominantly rely on static metrics, such as user interactions and favorites, making it challenging for users to efficiently identify high-quality apps. At the same time, current academic research focuses on specific vertical fields and lacks a general, automated evaluation framework applicable to the diverse LLM app ecosystem. To address the above challenges, we present LaQual, an automated framework for LLM app quality evaluation. LaQual integrates three key stages: (1) LLM app labeling and hierarchical classification for precise scenario mapping; (2) static indicator evaluation using time-weighted user engagement and functional capability indicators to filter low-quality apps; and (3) dynamic scenario-adapted evaluation, where an LLM generates scenario-specific evaluation metrics, scoring criteria, and tasks for comprehensive quality evaluation. Experiments on a mainstream LLM app store demonstrate the effectiveness of LaQual. Its automated scores show high consistency with human judgments. Through effective screening, LaQual can reduce the candidate LLM app pool by 66.7% to 81.3%. User studies further validate its significant outperformance over baseline systems, particularly in comparison efficiency (mean 5.45 vs. 3.30) and value of explanatory information (4.75 vs. 2.25). These results demonstrate that LaQual provides a scalable, objective, and user-centric solution for high-quality discovery and recommendation of LLM apps in real-world scenarios.

09.
arXiv (CS.LG) 2026-06-16

Machine learning enables roughness-driven inverse design of milling processes

arXiv:2606.16032v1 Announce Type: cross Abstract: Interest in applying data-driven approaches in manufacturing has grown significantly, particularly for mapping complex, high-dimensional relationships. The milling process is one area where predictive models can link influential parameters to surface roughness metrics prior to in situ operations. While this approach offers clear advantages, it faces challenges due to limited datasets and robustness issues in inverse design paradigms. To address these challenges, this paper proposes a machine learning (ML)-based framework for the inverse design of the surface milling process, with a focus on surface roughness as the design objective. The framework employs forward training of two ML models, a deep neural network (DNN) and a random forest (RF) ensemble, both developed using a high-fidelity synthetic dataset generated from a computational simulation framework. These trained models are integrated into a Bayesian optimization (BO) procedure to overcome the multiplicity problem arising from the many-to-one mapping inherent in the dataset. The approach identifies top-performing milling process configurations, considering both process and tool parameters, and presents them from the full solution space. The models achieve average relative errors below 5% when compared to reference results, thereby demonstrating the robustness and reliability of the proposed methodology.

10.
arXiv (CS.LG) 2026-06-19

Statistical Properties of Training & Generalization

arXiv:2606.20299v1 Announce Type: cross Abstract: Deep learning has managed to evade numerous intuitions from classical statistics to achieve unprecedented performance on a number of real-world tasks. In this article, we investigate the key features and surprises of deep learning from a physics-informed perspective, taking care to point out and justify where possible the many choices inherent in constructing a deep learning model. In particular, we review the phenomenon of neural scaling laws and discuss their interplay with the constraints and inductive biases which may be present when applying machine learning to problems in physics.

11.
arXiv (CS.CL) 2026-06-16

Building Customer Support AI Agents at 100M-User Scale: An Evaluation-Driven Framework

The rapid rise in LLM capabilities has made AI agents increasingly viable across a broad range of tasks. Among the most promising applications is building production-ready customer-facing agents, a challenge that demands coordinated excellence in evaluation methodology, context engineering, training, and online measurement. Yet these critical pillars are typically developed in isolation, creating blind spots that only surface after deployment. In this paper, we present a unified framework that bridges offline development with online impact for customer support AI agents at Nubank, a company with 100M+ users. Our approach integrates several key components: (1) structured context engineering tailored to customer support agents, (2) systematic human-in-the-loop prompt iteration, (3) rigorous LLM judge evaluation with measured inter-rater agreement and GEPA optimization for consistency, and (4) ideation-to-production validation. A central insight is that evaluation-pipeline quality directly determines iteration velocity. We present results from five production deployments spanning distinct domains: card delivery, debt management, credit-limit support, card management, and product explanation. These deployments deliver consistent customer-satisfaction gains while substantially accelerating iteration. In our card-delivery deployment, large-scale A/B testing yields a 37 percentage-point improvement in AI transactional Net Promoter Score and a 29 percentage-point gain in self-service rate over prior agent variants, alongside a strong correlation between offline simulation metrics and online outcomes, demonstrating that eval-driven development reliably predicts production impact. On most use cases, AI satisfaction reaches within a few percentage points of expert human agents.

12.
arXiv (math.PR) 2026-06-16

Super-Arrhenius relaxation of the triangular plaquette model in any dimension

arXiv:2606.16259v1 Announce Type: new Abstract: Consider the following plaquette model from statistical physics: a lamp lies at every vertex of the triangular lattice and a switch lies at every even vertex of the (bipartite) dual hexagonal lattice. Each switch toggles the three lamps on its face. The energy of a configuration is the number of ON lamps. For the Glauber dynamics associated with the Gibbs measure defined by this Hamiltonian at any inverse temperature $\beta>0$, we show that, in any dimension $d\ge 2$, the infinite volume relaxation time satisfies \[e^{\beta^2/C}/C \le T_{\mathrm{rel}}\le Ce^{e^{C\beta}}\] for some $C>0$. Our result entails that the Gibbs measure is unique. The $e^{\beta^2}$ scaling was conjectured by Newman and Moore in 1999 and matches the behaviour of supercritical rooted kinetically constrained models such as the East model, thus recovering fragile glass phenomenology in the absence of kinetic constraints. More precisely, we show that, on a torus of side length $2^k$, when $\beta\to\infty$ and $k/\beta\to0$, we have $T_{\mathrm{rel}}=e^{2\beta k(1+o(1))}$. Quite surprisingly, however, we also prove that, on non-periodic finite domains of size $n\le e^{\beta/C}$ for large $C>0$, we have the much larger asymptotics $\ln T_{\mathrm{rel}}=\beta n^{\Theta(1)}$. The main ingredients of the proofs are new results in extremal and enumerative combinatorics and rely on renormalisation ideas for the dynamics and its groundstates also known as the Ledrappier subshift. We note consequences of our results to geometric group theory (more precisely to the complexity of the word problem for the Baumslag finitely presented group) and to ergodic theory.

13.
arXiv (math.PR) 2026-06-16

Layerwise Terminal Discrepancy in Chen's Reverse-Heat Coupling on the Boolean Cube

arXiv:2606.04573v2 Announce Type: replace-cross Abstract: Recently, Chen [Chen2026] proved that Talagrand's Boolean convolution conjecture holds up to the dimension-free factor \((\log\log\eta)^{3/2}\), namely for every fixed \(\tau>0\), \[ \mu\{P_\tau f>\eta\|f\|_1\} \le C_\tau \frac{(\log\log\eta)^{3/2}}{\eta\sqrt{\log\eta}}, \qquad \eta>e^3. \] We revisit the terminal testing-discrepancy step in Chen's perturbed reverse-heat coupling. Chen estimates this discrepancy globally in terms of the remaining gap to the terminal level. We keep the same coupling and the same reverse-heat formulations, but localize the terminal discrepancy on each remaining-gap layer before summing the layers. This changes the fixed-time anti-concentration cost from order \((\log L)^{3/2}/\sqrt L\) to order \((\log L)/\sqrt L\), where \(L=\log\eta\). Consequently, we obtain a \((\log\log\eta)^{1/2}\) improvement as \[ \mu\{P_\tau f>\eta\|f\|_1\} \le C_\tau \frac{\log\log\eta}{\eta\sqrt{\log\eta}}, \qquad \eta>e^3. \]

14.
arXiv (CS.AI) 2026-06-18

Deep Learning-Driven Inverse Design of Doherty Power Amplifiers Using Pixelated Combiners and Dual-State Impedance Synthesis

arXiv:2606.18395v1 Announce Type: cross Abstract: The output combiner of a Doherty power amplifier (PA) integrates load modulation, impedance matching, and phase compensation within a single network, making its design and synthesis highly challenging. In this paper, we propose a three-port Doherty combiner design methodology that combines deep convolutional neural networks (CNNs), pixelated layout representations, and genetic algorithms (GA) with dual-state impedance synthesis to address both peak and back-off power conditions. As a proof of concept, two GaN HEMT Doherty PA prototypes incorporating three-port pixelated combiners are designed and fabricated. Both prototypes achieve a measured saturated output power exceeding 44.2 dBm with peak drain efficiency above 71.2% within 2.6-2.8 GHz. Furthermore, a drain efficiency as high as 64% is measured at the 6-dB back-off level. After applying digital predistortion, each prototype achieves an adjacent channel leakage ratio (ACLR) better than -51.3 dBc.

15.
arXiv (CS.AI) 2026-06-16

Unassigned Agents in Compilation-based Multi-agent Path Finding

arXiv:2606.15797v1 Announce Type: new Abstract: Compilation-based techniques represent an important stream of solvers for multi-agent path finding (MAPF) due to their modularity and adaptability for non-standard variants of the problem. While in the standard MAPF the task is to navigate all agents from their initial positions to given individual goal positions without any collision, variants where a different requirement for agents is used are also relevant. Such a variant is MAPF with unassigned agents (UA-MAPF) where some agents have the same setting as in the standard MAPF with initial positions and goals while the remaining agents have the initial position but have no goal - unassigned agents. Despite unassigned agent do not need to reach any goal position they have to be moved out of the way of the standard agents if needed which represent a specific challenge. We show in this paper that UA-MAPF can be expressed in recent compilation-based techniques for MAPF based on formulating the problem as Boolean satisfiability, namely we adapt SMT-CBS and NRF-SAT, the recent solvers based on counterexample guided abstraction refinement and non-refined abstractions.

16.
arXiv (CS.AI) 2026-06-11

Feature-Aligned Speech Watermarking for Robustness to Reconstruction Distortions

arXiv:2606.11828v1 Announce Type: cross Abstract: Audio watermarking aims to embed identifiable information into audio while remaining imperceptible. Existing methods adopt high-fidelity, low-energy designs to preserve perceptual quality, but the resulting watermarks lack robustness under suppression by speech reconstruction models. Improving robustness is challenging due to the inherent robustness-fidelity trade-off in existing designs, where increasing watermark energy improves robustness but reduces fidelity. To address this problem, we propose a feature-aligned watermarking method that aligns the watermark with the original speech feature distribution, allowing higher watermark energy to improve robustness while preserving imperceptibility. We use a pretrained speech codec to generate a pseudo-speech watermark and fuse it into the spectrogram of the input audio, with VAD loss and perceptual losses guiding embedding within voiced regions. Experiments show that our method maintains imperceptibility comparable to existing approaches while substantially improving robustness under both seen and unseen speech reconstruction models.

17.
arXiv (quant-ph) 2026-06-15

Collision models for open quantum systems coupled to finite environments

arXiv:2606.14163v1 Announce Type: new Abstract: We study a system qubit repeatedly interacting with the same environmental qubit, with a reservoir acting on the environment between collisions via a completely positive, trace-preserving map. We show that complete suppression of system–environment correlations uniquely requires a full environmental reset, recovering a semi group dynamics with a time-independent Gorini–Kossakowski–Sudarshan–Lindblad generator, whereas a partial reset yields a continuous transition between Markovian and non-Markovian regimes governed by a single dimensionless relaxation parameter. For a resonant excitation-exchange interaction, we obtain exact closed-form expressions for the Bloch-vector dynamics for both a generalized depolarizing channel and a generalized amplitude-damping channel acting as the reservoir-induced map. Using the Breuer–Laine–Piilo measure and a Choi-matrix CP-divisibility witness, we identify three distinct dynamical regimes across the parameter space: CP-divisible Markovian dynamics, CP-indivisible but P-divisible dynamics, and non-P-divisible non-Markovian dynamics. The boundaries between these regimes, and the structural differences between uniform and anisotropic environmental relaxation, are characterized numerically.

18.
Nature Medicine 2026-06-11

Clinical Profile and Genomic Characterization of the 2026 Bundibugyo Virus Index Case in Uganda

Bundibugyo virus disease (BVD) remains a high-consequence threat in Eastern and Central Africa, where cross-border mobility, nonspecific early symptoms, and delayed recognition can obscure transmission. In this case report, we describe Uganda’s 2026 BVD index case: a male patient who traveled from the Democratic Republic of the Congo to Uganda and was admitted to a private hospital in Kampala on 11 May 2026 after more than two weeks of vomiting and diarrhea, with epigastric pain, weakness, and hiccups. He deteriorated rapidly, developing acute kidney injury, pulmonary edema, hepatic dysfunction, hypoxemia, delirium, atrial flutter, possible disseminated intravascular coagulation, and multiorgan failure, and died on 14 May. A posthumous EDTA whole-blood specimen tested at the Central Emergency Response and Surveillance Laboratory was positive for orthoebolavirus RNA and confirmed as Bundibugyo virus (BDBV) by RT-qPCR. Sequencing achieved 99% genome coverage at ≥100× depth. The 2026 BDBV genome formed a distinct lineage approximately equidistant from the 2007–2008 Butalya and 2012 Isiro variants, differing by 216–227 nucleotides (~1.2% sequence divergence). Here, we demonstrate the value of fatality surveillance, private-sector surveillance, diagnostic optimization through national specimen referral, and rapid molecular-genomic diagnostics for early detection, transmission chain interruption, and public health response coordination.

19.
bioRxiv (Bioinfo) 2026-06-16

cuBayes: GPU accelerated FreeBayes that achieves 1-minute whole-genome SNV calling while maintaining algorithmic semantics

Next-generation sequencing now produces whole-genome data in hours, but downstream variant calling remains a multi-hour to multi-day bottleneck that excludes genomic analysis from time-critical clinical settings. GPU acceleration offers a natural path forward – variant calling is inherently parallelizable across genomic positions – yet open-source infrastructure for porting existing algorithms to GPU hardware remains limited, leaving many widely-used tools without accelerated implementations. FreeBayes, a haplotype-based variant caller central to the 1000 Genomes Project and to multi-sample tumor evolution analyses, exemplifies this gap: it is natively single-threaded despite its algorithmic suitability for parallelization. We present cuBayes, a CUDA implementation of FreeBayes germline SNV calling that completes HG002 and HG004 2x250bp Illumina 60x whole-genome analysis in one minute (as opposed to hours if not days with manual region-based CPU parallelization) on a single NVIDIA RTX 6000 Ada GPU, while producing variant calls with >99.9% concordance to the CPU reference. cuBayes is structured around an atom/molecule architecture in which reusable functional units (BAM decompression, position-wise pileup, batch coordination) are cleanly separated from algorithm-specific logic, providing a foundation intended to support acceleration of additional sequence analysis algorithms without redundant low-level engineering.

20.
medRxiv (Medicine) 2026-06-15

Genome-wide colocalization of body fat distribution GWAS and subcutaneous adipose eQTLs identifies SNX10, DGKQ, and CBX3 as candidate causal genes for cardiometabolic disease

作者:

Background: Genome-wide association studies (GWAS) have identified hundreds of loci associated with body fat distribution, yet the causal genes and regulatory mechanisms through which these variants exert their effects remain largely unknown. Expression quantitative trait locus (eQTL) colocalization provides a powerful framework for identifying genes whose expression is genetically coregulated with complex traits. Methods: We performed a genome-wide colocalization analysis integrating waist-hip ratio adjusted for body mass index (WHRadjBMI) GWAS summary statistics from 694,649 individuals (Pulit et al., 2019) with subcutaneous adipose tissue eQTLs from the Genotype-Tissue Expression (GTEx) Project v8 (N = 581 donors). GWAS coordinates were lifted from GRCh37 to GRCh38 to enable direct alignment with GTEx data. We incorporated CAVIAR fine-mapping results to overcome the limitation of FDR-significant eQTL filtering. Colocalization was assessed using the approximate Bayes factor framework (coloc.abf) across 335 independent genome-wide significant loci. Results: Of 2,897 locus-gene pairs tested, 489 (16.9%) showed strong colocalization (PP.H4 > 0.8) and 618 (21.3%) showed moderate evidence (PP.H4 > 0.5). The strongest colocalization was observed for SNX10 (sorting nexin 10; PP.H4 = 1.000), a recently characterized regulator of adipocyte differentiation and female-specific diet-induced obesity. Other top hits included DGKQ (diacylglycerol kinase theta; PP.H4 = 0.9999999), an emerging pharmacological target for insulin resistance, and CBX3 (chromobox 3; PP.H4 = 0.9999974), an epigenetic regulator linked to cardiovascular disease. Established adiposity genes including GRB14 (PP.H4 = 0.681) and KLF14 (PP.H4 = 0.590) were recovered, validating our approach. Several loci exhibited extensive allelic heterogeneity, with 50 genes colocalizing at a single chromosome 3 locus. Conclusions: Our analysis provides a comprehensive map of adipose tissue gene regulatory mechanisms underlying genetic risk for body fat distribution. The identification of SNX10, DGKQ, and CBX3 as high-confidence candidate causal genes advances the translation of GWAS associations into mechanistic understanding and therapeutic targets for obesity-related cardiometabolic disease.

21.
arXiv (CS.AI) 2026-06-19

FreeStyle: Free Control of Style-Content Dual-Reference Generation from Community LoRA Mining

arXiv:2606.20506v1 Announce Type: cross Abstract: Style-content dual-reference generation aims to synthesize an image that preserves the structure and semantics of a content reference while adopting the style of a separate style reference.Despite recent progress, this setting remains challenging because models must balance content fidelity, style alignment, and instruction following avoiding semantic leakage from the style reference.A key bottleneck is the lack of large-scale triplet data with clean content-style separation and broad long-tail style coverage.In this work, we propose FreeStyle, a scalable dual-reference generation framework based on community LoRA mining.We treat community LoRAs as compositional anchors for style and content, and design a rigorous generation and filtering pipeline to construct large-scale Style-Reference and Content-Reference triplets across multiple base models.To address content leakage, we adopt a two-stage curriculum with stage-specific disentanglement mechanisms: an attention-level enrichment constraint that suppresses style-reference leakage in the style-transfer stage, and a frequency-aware RoPE modulation strategy that targets positional-correspondence-based leakage in the harder dual-reference stage.We also introduce a benchmark covering both style-reference and dual-reference generation, with evaluations on style similarity, content preservation, aesthetics, instruction following, and leakage rejection. The benchmark incorporates a style-invariant Content Alignment Score (CAS) and introduces a calibrated VLM-based Rejection Score for evaluating generation reliability and leakage suppression.Extensive experiments show that our model achieves a strong balance among style alignment, content preservation, and leakage suppression.

22.
arXiv (math.PR) 2026-06-16

The optimal sub-Gaussian normalisation for randomised monotone functions

arXiv:2312.01265v5 Announce Type: replace Abstract: Let $\mathcal{M}$ denote the class of randomised monotone functions on $\mathbb{R}$ with values in $[0,1]$, and let $U_{\mathcal{M}}\colon \mathbb{R}_+\to \mathbb{R}_+$ be the minimal function for which $$ \mathbb{P}\left\{ \sqrt{\eta_f}\, \sup_{t\in\mathbb{R}} \left| f_Z(t) - \Exf{f_Z(t)} \right| \ge \varepsilon\sqrt{U_{\mathcal{M}}(\eta_f)} \right\} \le 2\e^{-2\varepsilon^2} $$ holds for every member $f_Z$ of $\mathcal{M}$ with finite effective sample size $\eta_f$ and every positive $\varepsilon$. We prove that for every $x> 1$, $$ \left| \sqrt{U_{\mathcal{M}}(x)} - \sqrt{\log_4 x} \right| \le 2 \min\!\left\{ 1,\, \frac{2 \ln(\e + \ln x)}{\sqrt{\ln x}} \right\}\,. $$ The optimal adjustment $\sqrt{U_{\mathcal{M}}(x)}$ matches $\frac{1}{\sqrt{2\ln 2}}\sqrt{\ln x}$ for all $x>1$, with residuals bounded as above.

23.
arXiv (CS.AI) 2026-06-19

Enhancing Generative Auto-bidding with Offline Reward Evaluation and Policy Search

arXiv:2509.15927v5 Announce Type: replace-cross Abstract: Auto-bidding is a critical tool for advertisers to improve advertising performance. Recent progress has demonstrated that AI-Generated Bidding (AIGB), which learns a conditional generative planner from offline data, achieves superior performance compared to typical offline reinforcement learning (RL)-based auto-bidding methods. However, existing AIGB methods still face a performance bottleneck due to their inherent inability to explore beyond the static dataset with feedback. To address this, we propose AIGB-Pearl (Planning with \textbf{EvaluAtor via RL}), a novel method that integrates generative planning and policy optimization. The core of AIGB-Pearl lies in constructing a trajectory evaluator to assess the quality of generated scores and designing a provably sound KL-Lipschitz-constrained score-maximization scheme to ensure safe and efficient exploration beyond the offline dataset. A practical algorithm that incorporates the synchronous coupling technique is further developed to ensure the model regularity required by the proposed scheme. Extensive experiments on both simulated and real-world advertising systems demonstrate the state-of-the-art performance of our approach.

24.
arXiv (math.PR) 2026-06-17

Optimal Impulse Control for Cyber Risk Management

arXiv:2410.17706v2 Announce Type: replace-cross Abstract: We explore an optimal impulse control problem wherein an electronic device owner strategically calibrates protection levels against cyber attacks. Utilizing epidemiological compartment models, we qualitatively characterize the dynamics of cyber attacks within the network. We determine the optimal protective measures against effective hacking by formulating and solving a stochastic control problem with optimal switching. We demonstrate that the value function for the cluster owner constitutes a viscosity solution to a system of coupled variational inequalities associated with a fully coupled reflected backward stochastic differential equation (BSDE). Furthermore, we devise a comprehensive algorithm alongside a verification procedure to ascertain the optimal timing for network protection across various cyber attack scenarios. Our findings are illustrated through numerical approximations employing deep Galerkin methods for partial differential equations (PDEs). We visualize the optimal protection strategies in the context of two distinct attack scenarios: (1) a constant cyber attack, (2) an exogenous cyber attack strategy modeled with a Poisson process.

25.
PLOS Computational Biology 2026-06-11

MicroRNA target gene prediction model based on input-feature dependency and sample data expansion technique

作者:

by Yan Shao, Yazhou Li, Hexin Zhai, Shimin Dong Predicting microRNA target genes is essential for understanding their biological functions. This study developed a miRNA target gene prediction model based on input-feature dependency. Features were treated as multiple random variables, with marginal densities estimated using Gaussian mixture models (GMM) and dependencies captured by regular vine (R-vine) copula to derive joint probability density functions. We constructed class-conditional joint densities for positive and negative samples separately using GMM and R-vine copula, then combined these with prior probabilities using Bayes’ rule to obtain posterior probabilities of positive interactions, using a standard 0.5 probability threshold for deterministic prediction. To address insufficient data and class imbalance, hybrid distribution mega-trend diffusion was used to generate virtual samples for data augmentation. Computational validation showed high predictive performance even when only 30% of the training data were used. As proof-of-concept, we experimentally validated one predicted interaction (miR-8485 targeting JAK2) using dual-luciferase, cellular, and animal experiments, confirming the biological relevance of this specific model-generated prediction. These findings provide a valuable tool for understanding miRNA functions and disease mechanisms.