Academic Intelligence · Curated Daily

探索全球前沿学术脉络

AcademicHub 汇聚顶级期刊与预印本平台的实时文献。定制您的专属科研雷达,利用大语言模型自动生成交叉领域文献分析简报。

01.
arXiv (CS.AI) 2026-06-11

SAGE: Scalable AI Governance & Evaluation

arXiv:2602.07840v4 Announce Type: replace-cross Abstract: Evaluating relevance in large-scale search systems is fundamentally constrained by the governance gap between nuanced, resource-constrained human oversight and the high-throughput requirements of production systems. While traditional approaches rely on engagement proxies or sparse manual review, these methods often fail to capture the full scope of high-impact relevance failures. We present SAGE (Scalable AI Governance \& Evaluation), a framework that operationalizes high-quality human product judgment as a scalable evaluation signal. At the core of SAGE is a bidirectional calibration loop where natural-language Policy, curated Precedent, and an LLM Surrogate Judge co-evolve. SAGE systematically resolves semantic ambiguities and misalignments, transforming subjective relevance judgment into an executable, multi-dimensional rubric with near human-level agreement. To bridge the gap between frontier model reasoning and industrial-scale inference, we apply teacher-student distillation to transfer high-fidelity judgments into compact student surrogates at 92$\times$ lower cost. Deployed within LinkedIn Search ecosystems, SAGE guided model iteration through simulation-driven development, distilling policy-aligned models for online serving and enabling rapid offline evaluation. In production, it powered policy oversight that measured ramped model variants and detected regressions invisible to engagement metrics. Collectively, these drove a 0.25\% lift in LinkedIn daily active users.

02.
arXiv (CS.AI) 2026-06-11

Precomputing Multi-Agent Path Replanning Using Temporal Flexibility

arXiv:2601.04884v3 Announce Type: replace Abstract: Executing a multi-agent plan can be challenging when an agent is delayed, because this typically creates conflicts with other agents. So, we need to quickly find a new safe plan. Replanning only the delayed agent often does not yield an efficient plan, and sometimes cannot even yield a feasible one. On the other hand, replanning other agents may lead to a cascade of changes and delays, and it is computationally expensive. We show how to efficiently replan a single delayed agent by tracking and using the temporal flexibility of other agents while avoiding cascading delays. This flexibility is the maximum delay that the agent can take without changing the order with agents other than the initially delayed agent, or further delaying other agents. Our algorithm, FlexSIPP, precomputes all possible plans for the delayed agent and returns the changes to the other agents within the given scenario. We demonstrate our method in a real-world case study of replanning trains in the densely-used Dutch railway network and in the MovingAI MAPF benchmark set. Our experiments show that FlexSIPP provides effective solutions relevant to real-world adjustments, and within a reasonable timeframe.

03.
arXiv (CS.AI) 2026-06-17

Graph neural networks at war: integrating cybersecurity and drone intelligence in the Israeli-Iranian conflict

arXiv:2606.17119v1 Announce Type: cross Abstract: Physical cyber systems have brought about new threats and challenges in detection and immediate response. This study examines how Graph Neural Networks (GNNs) can be used to aid cybersecurity and drone management in a physical cyber system comprising of cyber intrusions and unmanned aerial vehicles (UAVs). By providing a bridge between structural understanding of graphical neural networks, this work has provided an integrated procedure that allows intrusion detection systems to educate on underlying network structures, identify malicious activity, and facilitates drone response measures. Based on an emulation-based case study, cyberattacks models were created to provoke the responses of the drones, which proved that graph-based learning can assist with the situational awareness, swarm coordination, and adaptive maneuver. According to the performance valuation, this method has a detection rate of 94.2, average area under the receiver operating characteristic (ROC) of 0.955 and an average response time of 1.4 seconds. Comparative experiments reveal that proposed GraphSAGE network is more effective than the Graphical Convolutional Networks (GCNs) and Graphical Attention Networks (GATs) in the identical situation. Such findings prove that graphical neural networks can be used to avert intrusion and response of dynamic cyber-physical systems.

04.
arXiv (CS.LG) 2026-06-11

Bernstein-Schur Kernels: Random Features by Sketched Modulation and Radial Randomization

arXiv:2606.11255v1 Announce Type: new Abstract: Bernstein–Schur kernels are products of a finite-feature kernel (one with an explicit finite-dimensional feature map) and a completely monotone shift-invariant kernel: nonstationary kernels that fall between the shift-invariant and dot-product templates random features usually exploit, so in general neither Bochner sampling nor polynomial sketching applies to the full kernel directly. We give one random-feature construction for the whole class that randomizes both factors: it sketches the finite modulation and randomizes the completely monotone radial factor, sampling the latter's one-dimensional Bernstein–Widder scale and then applying Gaussian random Fourier features (whose frequency is still $d$-dimensional). The feature dimension is then $Dm$, set by the sketch size $m$ and the radial-draw count $D$, free of the $O(d^2)$ size of the exact modulation feature. Keeping the modulation \emph{exact is the analyzable limit ($m\to\infty$): there we prove unbiasedness, an exact variance for the recommended flat estimator, an expected matrix-Bernstein operator-norm bound (with a matching high-probability tail) controlled by the top eigenvalues of the kernel and modulation Gram matrices together with an intrinsic dimension rather than the crude $N\max_{ij}$ entrywise route, and a deterministic relative-spectral kernel-ridge stability result. By conditioning on the sketch, the doubly-randomized estimator inherits the same intrinsic-dimension operator-norm guarantee plus a single additive sketch term, tunable by $m$ independently of $D$. The motivating instance is the biased $yat$-kernel $k_{yat,b}(w,x)=(w^\top x+b)^2/(\|w-x\|^2+\varepsilon)$, $b\ge0$, whose family span contains the inverse-multiquadric kernel by finite differences in $b$; for it the radial mixture is the IMQ spectral sampler, and one frequency per scale is variance-optimal at a fixed radial-feature budget.

05.
arXiv (CS.CV) 2026-06-16

Shift-and-Sum Quantization for Visual Autoregressive Models

Post-training quantization (PTQ) enables efficient deployment of deep networks using a small set of data. Its application to visual autoregressive models (VAR), however, remains relatively unexplored. We identify two key challenges for applying PTQ to VAR: (i) large reconstruction errors in attention-value products, especially at coarse scales where high attention scores occur more frequently; and (ii) a discrepancy between the sampling frequencies of codebook entries and their predicted probabilities due to limited calibration data. To address these challenges, we propose a PTQ framework tailored for VAR. First, we introduce a shift-and-sum quantization method that reduces reconstruction errors by aggregating quantized results from symmetrically shifted duplicates of value tokens. Second, we present a resampling strategy for calibration data that aligns sampling frequencies of codebook entries with their predicted probabilities. Experiments on class-conditional image generation, inpainting, outpainting, and class-conditional editing show consistent improvements across VAR architectures, establishing a new state of the art in PTQ for VAR.

06.
arXiv (CS.LG) 2026-06-18

Ultrafast On-chip Online Learning via Spline Locality in Kolmogorov-Arnold Networks

arXiv:2602.02056v3 Announce Type: replace-cross Abstract: Ultrafast online learning is essential for high-frequency systems, such as controls for quantum computing and nuclear fusion, where adaptation must occur on sub-microsecond timescales. Meeting these requirements demands low-latency, fixed-precision computation under strict memory constraints, a regime in which conventional Multi-Layer Perceptrons (MLPs) are both inefficient and numerically unstable. We identify key properties of Kolmogorov-Arnold Networks (KANs) that align with these constraints. Specifically, we show that: (i) KAN updates exploiting B-spline locality are sparse, enabling superior on-chip resource scaling, and (ii) KANs are inherently robust to fixed-point quantization. By implementing fixed-point online training on Field-Programmable Gate Arrays (FPGAs), a representative platform for on-chip computation, we demonstrate that KAN-based online learners are significantly more efficient and expressive than MLPs across a range of low-latency and resource-constrained tasks. To our knowledge, this work is the first to demonstrate model-free online learning at sub-microsecond latencies.

07.
arXiv (CS.CV) 2026-06-12

ReFree: Towards Realistic Co-Speech Video Generation via Reward-Free RL and Multilevel Speech Guidance

Speech-driven talking character animation seeks to generate life-like portrait videos that convey natural conversation behavior, aligning facial motion with spoken audio. Although recent advances in video generation have substantially improved realism in video-based animation, achieving both accurate lip articulation and expressive behavior remains challenging. Existing approaches typically trade off precise phoneme-to-lip synchronization against dynamic facial expressions and head motion, yielding animations that are either accurate yet rigid, or expressive but poorly synchronized. We address this challenge by proposing ReFree-S2V, a flow-matching speech-to-portrait animation framework that builds upon a pretrained video generation model to achieve fine-grained speech articulation and high-level expressive cues in speech-driven portrait animation. This model introduces a multi-level speech representation capturing phonetic and prosodic information at both local and global granularities. These representations are selectively injected into transformer blocks via learnable level selectors, enabling both accurate lip synchronization and natural expressive motion. To achieve natural head movements, we further introduce a novel reward-free reinforcement learning scheme into flow-matching training to discourage perceptually implausible motion without relying on handcrafted synchronization metrics or reward models, or the high cost of human preference annotation. Extensive experiments demonstrate that ReFree-S2V achieves state-of-the-art performance, significantly outperforming existing methods in both quantitative lip-sync accuracy and qualitative human evaluations of naturalness and expressivity.

08.
arXiv (CS.CV) 2026-06-11

Benchmarking Cross-Domain Audio-Visual Deception Detection

Automated deception detection is crucial for assisting humans in accurately assessing truthfulness and identifying deceptive behavior. Conventional contact-based techniques, like polygraph devices, rely on physiological signals to determine the authenticity of an individual's statements. Nevertheless, recent developments in automated deception detection have demonstrated that multimodal features derived from both audio and video modalities may outperform human observers on publicly available datasets. Despite these positive findings, the generalizability of existing audio-visual deception detection approaches across different scenarios remains largely unexplored. To close this gap, we present the first cross-domain audio-visual deception detection benchmark, that enables us to assess how well these methods generalize for use in real-world scenarios. We used widely adopted audio and visual features and different architectures for benchmarking, comparing single-to-single and multi-to-single domain generalization performance. To further exploit the impacts using data from multiple source domains for training, we investigate three types of domain sampling strategies, including domain-simultaneous, domain-alternating, and domain-by-domain for multi-to-single domain generalization evaluation. We also propose an algorithm to enhance the generalization performance by maximizing the gradient inner products between modality encoders, named ``MM-IDGM". Furthermore, we proposed the Attention-Mixer fusion method to improve performance, and we believe that this new cross-domain benchmark will facilitate future research in audio-visual deception detection.

09.
arXiv (CS.AI) 2026-06-11

Noise-Aware Framework for Correcting Corrupted Labels

arXiv:2606.11695v1 Announce Type: cross Abstract: High-quality labeled data is essential for training reliable ML/DL models. However, real-world datasets often contain a considerable proportion of corrupted labels, which can severely degrade model performance. To address this problem, we propose CANOLA, a novel framework for correcting corrupted labels through noise-aware learning and iterative label refinement. CANOLA explicitly estimates the underlying noise distribution of the dataset and incorporates this information into the training of a noise-aware Deep Neural Network. By incorporating noise characteristics during learning, CANOLA enables the model to down-weight unreliable supervision signals and focus on trustworthy patterns, thereby improving robustness and generalization. Label correction is performed via cautious, iterative soft label refinement, in which model predictions are blended with observed labels to prevent premature or erroneous updates. This progressive refinement allows the dataset to be repaired in a stable and controlled manner. We evaluate CANOLA on six widely used datasets under realistic noisy labeling scenarios. Experimental results show that CANOLA consistently outperforms SOTA label correction methods, achieving relative improvements ranging from 19% to 52% in error reduction. Moreover, models trained on datasets corrected by CANOLA obtain substantial downstream performance gains. Even simple classifiers trained on CANOLA's corrected data can outperform complex model-centric approaches by margins of up to 67%.

10.
arXiv (CS.CL) 2026-06-12

The Pragmatic Persona: Discovering LLM Persona through Bridging Inference

Large Language Models (LLMs) reveal inherent and distinctive personas through dialogue. However, most existing persona discovery approaches rely on surface-level lexical or stylistic cues, treating dialogue as a flat sequence of tokens and failing to capture the deeper discourse-level structures that sustain persona consistency. To address this limitation, we propose a novel analytical framework that interprets LLM dialogue through bridging inference – implicit conceptual relations that connect utterances via shared world knowledge and discourse coherence. By modeling these relations as structured knowledge graphs, our approach captures latent semantic links that govern how LLMs organize meaning across turns, enabling persona discovery at the level of discourse coherence rather than surface realizations. Experimental results across multiple reasoning backbones and target LLMs, ranging from small-scale models to 80B-parameter systems, demonstrate that bridging-inference graphs yield significantly stronger semantic coherence and more stable persona identification than frequency or style-based baselines. These results show that persona traits are consistently encoded in the structural organization of discourse rather than isolated lexical patterns. This work presents a systematic framework for probing, extracting, and visualizing latent LLM personas through the lens of Cognitive Discourse Theory, bridging computational linguistics, cognitive semantics, and persona reasoning in large language models. Codes are available at https://github.com/JiSoo-Yang/Persona_Bridging.git

11.
arXiv (CS.CV) 2026-06-15

Relational Retrieval: Leveraging Known-Novel Interactions for Generalized Category Discovery

In this study, we tackle Generalized Category Discovery (GCD) via a Relational Retrieval perspective, explicitly coupling labeled and unlabeled data through bidirectional knowledge transfer. While existing methods treat these sources separately, missing valuable interaction opportunities, we propose Relational Pattern Consistency (RPC) that enables mutual enhancement. RPC employs One-vs-All classifiers for soft ID/OOD decomposition, then introduces two mechanisms: (i) for known-class preservation, we transfer semantic behavioral alignment; (ii) for category discovery, we leverage the insight that samples from the same category maintain invariant relationships with known-class prototypes, transforming unreliable pseudo-labeling into well-defined relational pattern matching. This bidirectional design allows labeled data to guide unlabeled learning while discovering novel categories through their collective relational signatures. Extensive experiments demonstrate RPC achieves state-of-the-art performance on both generic and fine-grained benchmarks.

12.
arXiv (CS.LG) 2026-06-19

Flow Matching for Efficient and Scalable Data Assimilation

arXiv:2508.13313v4 Announce Type: replace-cross Abstract: Data assimilation (DA) estimates a dynamical system's state from noisy observations. Recent generative models like the ensemble score filter (EnSF) improve DA in high-dimensional nonlinear settings but are computationally expensive. We introduce the ensemble flow filter (EnFF), a training-free, flow matching (FM)-based framework that accelerates sampling and offers flexibility in flow design. EnFF uses Monte Carlo estimators for the marginal flow field, localized guidance for observation assimilation, and utilizes a novel flow path that exploits the Bayesian DA formulation. It generalizes classical filters such as the bootstrap particle filter and ensemble Kalman filter. Experiments on high-dimensional benchmarks demonstrate EnFF's improved cost-accuracy tradeoffs and scalability, highlighting FM's potential for efficient, scalable DA. Code is available at https://github.com/Utah-Math-Data-Science/Data-Assimilation-Flow-Matching.

13.
arXiv (CS.AI) 2026-06-11

T2S: A Rehearsal-Based Approach for Extraction-Resistant Model Watermarking

arXiv:2606.11698v1 Announce Type: cross Abstract: Model watermarking safeguards AI model intellectual property by embedding distinctive knowledge that induces unique behavioral signatures. The primary technical challenge lies in ensuring watermark robustness against various post-processing attacks on the watermarked model. Model extraction attacks emerge as the most severe threat, where adversaries exploit prediction outputs to train surrogate models that illegally replicate the original model's functionality. In this work, we propose a rehearsal-based watermark embedding framework to enhance the robustness of model watermarks against model extraction attacks. By simulating the extraction process, our method leverages the loss of a simulated stolen model on a trigger set as a training signal to fine-tune the watermark knowledge within the target model. This fine-tuning step encourages the watermark to be embedded in a way that boosts transferability, thereby increasing its chances of persisting and remaining detectable in stolen models. Comprehensive experiments conducted under diverse settings demonstrate that the proposed method significantly improves the robustness of model watermarks against both model extraction and subsequent watermark removal attacks.

14.
arXiv (CS.CV) 2026-06-16

Post-Launch Capability Expansion of Vision-Language Models via Prompting for On-Orbit Spacecraft Inspection

Spaceborne inspection systems often deploy perception models prior to launch, after which updating model weights or expanding fixed label sets becomes operationally impractical. While supervised models can be integrated pre-flight, adding new semantic capabilities in orbit requires retraining and re-uploading parameters. We investigate whether prompt-driven vision–language models can enable post-launch semantic expansion, allowing new spacecraft components to be specified via natural-language prompts without modifying onboard weights. We evaluate zero-shot instance segmentation of spacecraft components under a strictly frozen, single-pass inference protocol on a test set of $129$ images of previously unseen satellites. Under fixed global thresholds and no post-processing, SAM3 achieves $0.385$ mAP@$0.5$ and $0.267$ mAP@$0.5{:}0.95$. Performance is strongly scale-dependent: large structural elements like spacecraft bodies ($0.639$ AP@$0.50$) and solar arrays ($0.598$ AP@$0.5$) localize reliably, while relatively small appendages like antennas ($0.221$ AP@$0.5$) and thrusters ($0.081$ AP@$0.5$) remain difficult. Prompt formulation influences performance, with structured prompts incorporating spatial and geometric descriptors yielding up to $82%$ improvement over short category-name prompts. The model operates within the memory and compute envelope of contemporary embedded GPUs, suggesting prompt-driven grounding can provide a practical mechanism for post-launch semantic extension of dominant spacecraft structures while highlighting limitations of zero-shot localization for fine-scale components under orbital domain shift.

15.
arXiv (quant-ph) 2026-06-15

On-site interactions in quantum thermal machines: efficiency, rectification and entanglement beyond local and global master equations

arXiv:2606.14593v1 Announce Type: new Abstract: Advances in experimental techniques have opened new routes for harnessing non-equilibrium dynamics in mesoscopic quantum systems. In this context, we study the impact of on-site interactions on the transport properties of a continuous quantum thermal machine composed of two coupled oscillators connected to two thermal reservoirs. In the weak system-reservoir coupling regime, where a long-standing debate concerns which reduced description should be preferred, we first show that the Redfield master equation (RME) provides an accurate and unifying framework that interpolates between two well-known limits: the local and global master equations. By relying on the Hierarchy of Pure States (HOPS), a numerically exact stochastic method, we then explore the full parameter space and show that interactions can be leveraged to tune the efficiency of the thermal machine at high temperatures (while leaving it essentially unchanged at low temperatures), induce non-reciprocal transport under asymmetric reservoir couplings, and generate steady-state entanglement within the junction. We derive expressions for system-bath correlators, such as heat and particle currents, consistently across different frameworks. Our work features on-site interactions to enhance the versatility of quantum thermodynamic junctions and clarifies the role of non-Markovianity and non-linearities in quantum transport.

16.
arXiv (CS.AI) 2026-06-19

Beyond Static Endpoints: Tool Programs as an Interface for Flexible Agentic Web Services

arXiv:2606.19992v1 Announce Type: cross Abstract: In the agentic web era, LLM-based agents increasingly invoke web services as tools, yet most interfaces remain static endpoints that poorly express long-horizon workflows with loops, conditionals, joins, and retries. We present ToolPro, which represents an agent's tool intent as an executable tool program that compactly encodes multi-step service interactions with explicit effect types. ToolPro combines constraint-guided program construction, effect-aware replay for exactly-once state-modifying calls, and a profile-driven policy that decides when program execution outperforms stepwise calling. We instantiate ToolPro over MCP-style services with WebAssembly sandboxing and evaluate it on diverse workflows of real-world applications. ToolPro reduces end-to-end latency by up to 53.4\% and client-side traffic by up to 96.1\%, with larger gains under higher network latency and workflow complexity.

17.
arXiv (CS.CV) 2026-06-18

URDF Synthesis from RGB-D Sequences via Differentiable Joint Inference and Energy-Consistent Verification

作者:

Reconstructing simulation-ready digital twins of articulated objects from sensor observations remains constrained by two persistent gaps: (i) part-level geometric reconstruction is decoupled from kinematic-parameter estimation, and (ii) the recovered models often violate basic dynamic invariants such as energy conservation, leading to drift when the URDF is replayed in physics simulators. We present KinemaForge, a constraint-driven pipeline that jointly infers part-level shape, joint topology, and joint parameters from short RGB-D sequences and validates the result against an energy-consistent verifier built on differentiable rigid-body dynamics. The pipeline introduces three components: a kinematic constraint graph that encodes joint-part incidences as soft edges; a differentiable screw-axis solver that backpropagates from rendered observations through Featherstone's articulated-body algorithm to joint parameters; and an energy residual loss that penalises non-physical free responses of the reconstructed model. Across five PartNet-Mobility categories and an internal RGB-D benchmark, KinemaForge reduces the average joint-axis error from 4.52 degrees to 2.83 degrees (-37.4%) over the strongest geometric baseline (PARIS) and from 5.30 degrees to 2.83 degrees (-46.6%) over the interaction-based Ditto baseline, lowers long-horizon simulation drift by 64% (vs. PARIS) over 50 s rollouts, and yields URDFs whose closed-loop manipulation success rate improves by 14.6 percentage points over Ditto in our preliminary evaluation. Code and reconstruction data will be released upon acceptance.

18.
arXiv (CS.CV) 2026-06-11

ReMoT: Reinforcement Learning with Motion Contrast Triplets

We present ReMoT, a unified training paradigm to systematically address the fundamental shortcomings of VLMs in spatio-temporal consistency – a critical failure point in navigation, robotics, and autonomous driving. ReMoT integrates two core components: (1) A rule-based automatic framework that generates ReMoT-16K, a large-scale (16.5K triplets) motion-contrast dataset derived from video meta-annotations, surpassing costly manual or model-based generation. (2) Group Relative Policy Optimization, which we empirically validate yields optimal performance and data efficiency for learning this contrastive reasoning, far exceeding standard Supervised Fine-Tuning. We also construct the first benchmark for fine-grained motion contrast triplets to measure a VLM's discrimination of subtle motion attributes (e.g., opposing directions). The resulting model achieves state-of-the-art performance on our new benchmark and multiple standard VLM benchmarks, culminating in a remarkable 25.1% performance leap on spatio-temporal reasoning tasks.

19.
arXiv (CS.CV) 2026-06-15

A Qualitative Review of GenAI-Based Methods for Data Generation and Augmentation in Industrial Computer Vision Applications

AI-driven computer vision applications require a profound database to ensure predictable behaviors and performance. Such predictable behaviors are especially important for industrial applications in gaining trust from users. However, such a database is not readily available in industrial applications, and its acquisition is not trivial either. Active learning methods can be applied to ramp up data within a project deployment to iteratively increase the database, and thus the application predictability. Unfortunately, we observe that this often leads to a loss of user trust in the application, which is difficult to regain once lost. This leads to a "chicken-and-egg" dilemma in which neither the database nor the application is developed. In this work, we review state-of-the-art methods and approaches to further boost the database the initial active data ramp-up phase. Here, we focus on recent advancements in GenAI-based data generation and augmentation methods and review their adaptability on an industrial computer vision classification use case. Although we observe a potential for automatic data ramp-up, we also see a domain miss match in between the source (training environment) and target (industrial use-case) - regarding context defined in natural language and object characteristics.

20.
Nature Medicine 2026-06-15

Blood signatures of cell type-specific aging forecast disease risk and resilience

作者: 未知作者

By measuring thousands of proteins in blood samples from over 60,000 people, we built molecular ‘clocks’ to estimate how fast cells age. Our analyses show that cell types age at different rates within the same person. Accelerated aging of specific cell types is associated with increased disease risk, whereas slower aging of others is linked to protection and improved survival.

21.
medRxiv (Medicine) 2026-06-12

Opportunistic CKD Screening in Hospitalized Patients

Background. Chronic kidney disease (CKD) affects 10-13% of adults worldwide but remains largely undiagnosed until advanced stages. Hospitalization provides an opportunity for early detection through opportunistic urine albumin-to-creatinine ratio (UACR) measurement. Methods. We conducted a prospective three-arm study of opportunistic CKD screening in general internal medicine wards at Hadassah Mt. Scopus (MS), Hadassah Ein Kerem (EK), and Shaare Zedek Medical Center (SZMC) in Jerusalem (Protocol HMO-23-0300). Adult inpatients without known CKD or recent UACR were enrolled. Pathological UACR was defined as [≥]30 mg/g. Confirmed CKD required two pathological measurements [≥]90 days apart (KDIGO-compatible). eGFR was computed using the 2021 CKD-EPI race-free equation. Pooled proportions were estimated by fixed-effects logit meta-analysis; odds ratios by DerSimonian-Laird random-effects models. Results. A total of 158 patients were enrolled (MS n=50, EK n=57, SZMC n=51). Pathological first UACR was identified in 43/158 patients (27.2%; 95% CI 21.3-34.1%; I2=0% across centers). Of 24 patients with a second UACR available, 14 (58%) confirmed CKD, yielding a pooled confirmed-CKD rate of 8.9% of all screened patients. In-hospital mortality was significantly higher among patients with pathological UACR (9.3% vs ~2%; Fisher's exact p=0.012). In per-center multivariate logistic regression, three predictors reached pooled significance: BUN (OR 1.10 per mg/dL, 95% CI 1.04-1.17, p=0.002, I2=0%), heart failure (OR 3.21, 95% CI 1.34-7.70, p=0.009, I2=0%), and diabetes mellitus (OR 2.54, 95% CI 1.11-5.82, p=0.028, I2=17%). Cardiac/vascular admissions had the highest pathological UACR rate (~42%); GI/hepatic admissions had 0%. Conclusions. Opportunistic inpatient UACR screening identifies previously unrecognized CKD in approximately 9% of general internal medicine patients, with consistent results across three independent centers. BUN elevation, heart failure, and diabetes are the strongest independent predictors. Pathological UACR carries significant short-term mortality risk, supporting integration of routine screening into inpatient care pathways.

22.
arXiv (CS.LG) 2026-06-15

A Complexity Measure for Active Learning in Multi-group Mean Estimation

arXiv:2606.14690v1 Announce Type: new Abstract: We study a max-risk objective for active learning in a multi-group mean estimation $d$-armed bandits: a learner adaptively allocates a budget of $T$ samples across $d$ groups to minimize the worst-case uncertainty index $\max_{k\in[d]}\sigma_k^2/n_k$, where $\sigma_k$ is the standard deviation of the distribution of arm $d$, and $n_k$ is the number of times arm $d$ is sampled. We develop a local minimax framework and prove the first general lower bound for this objective, valid for any finite-variance hypothesis class. The bound separates difficulty into three orthogonal factors: a budget term, a heteroscedasticity index measuring how unevenly the uncertainty is spread across arms, and a model-dependent complexity measure, the Variance Local Curvature ($\mathrm{VLC}$), which captures how much information a local change of variance creates inside the hypothesis class. For smooth classes, the $\mathrm{VLC}$ is a reparametrization of a variance–Fisher information, with closed-form values for common families. Benchmarking against the strongest available upper bound shows near-optimality up to logarithmic factors in broad regimes, and pinpoints a systematic gap in highly heterogeneous instances. Our proof introduces two key ingredients: a loss-induced $\ell_1$ geometry on the decision space, and a representation-based instance generator that reduces hard-instance construction to an explicit random matrix calculation.

23.
arXiv (quant-ph) 2026-06-16

Generative modelling powered by room-temperature polariton condensates

arXiv:2606.15344v1 Announce Type: cross Abstract: Generative modelling requires efficient stochastic nonlinear transformations and physical platforms that can naturally realise them. We experimentally demonstrate that nonlinear optical systems operating in the strong light-matter coupling regime can serve as physical transformation layers for conditional generative modelling. Specifically, we develop a workflow in which room-temperature exciton-polariton condensates formed in organic dye microcavities act as a physical stochastic transform within a generative adversarial network and enable conditional digit-to-image translation. By using the nonlinear many-body dynamics and intrinsic stochasticity of polariton condensates, the workflow outperforms baseline approaches based on digitally injected perturbations. We find that polariton-enabled sampling via generative adversarial network (Polariton GAN) yields improved inception score, digit preservation accuracy and structural similarity compared with both digital sampling and laser-based systems. We further show that spatially correlated output variations can naturally regularise adversarial training and enhance output diversity. Our results establish polariton condensation as a new computational resource for generative modelling, opening a pathway towards physics-enhanced machine learning systems.

24.
arXiv (CS.LG) 2026-06-17

Recursive Learning Without Collapse: A Weighting-Based Stabilization Framework

arXiv:2502.18049v5 Announce Type: replace-cross Abstract: Recent studies identified an intriguing phenomenon in recursive generative model training known as model collapse, where models trained on data generated by previous models exhibit severe performance degradation. Addressing this issue and developing more effective training strategies have become central challenges in generative model research. In this paper, we investigate this phenomenon within a novel framework, where generative models are iteratively trained on a combination of newly collected real data and synthetic data from the previous training step. To develop an optimal training strategy for integrating real and synthetic data, we evaluate the performance of a weighted training scheme in various scenarios, including Gaussian distribution estimation, generalized linear models, and nonparametric estimation. We theoretically characterize the impact of the mixing proportion and weighting scheme of synthetic data on the final model's performance. Our key finding is that, across different settings, the optimal weighting scheme under different proportions of synthetic data asymptotically follows a unified expression, revealing a fundamental trade-off between leveraging synthetic data and model performance. In some cases, the optimal weight assigned to real data corresponds to the reciprocal of the golden ratio. Finally, we validate our theoretical results on extensive simulated datasets and a real tabular dataset.

25.
bioRxiv (Bioinfo) 2026-06-18

Identification of environmental factors and growth stages in the prediction of fibre yield and fibre quality traits in rain-grown cotton

Context Understanding how and when environmental conditions influence overall crop performance is crucial for optimising the development of genotypes to a specific breeding target environment. We focused on economically important traits of Australian rain-grown cotton including fibre yield and quality traits, which have not been investigated comprehensively. The aim of the study was to identify relevant environmental factors, and the timing and extent of their impact on rain-grown cotton production. Methods We used a data driven approach to analyse the relationship between ten climate related environmental factors across various plant growth stages and eight fibre yield and quality traits, using a large-scale field dataset of 9,283 records collected over 23 years at 4 locations, with 53 unique year-location combinations. We applied eight complementary statistical models including stepwise, penalised and Bayesian linear regression, regression-tree based ensemble methods and deep learning frameworks to (1) select the most essential environmental covariates affecting rain-grown cotton production, and (2) evaluate the predictive performance of these models. Results The environmental impacts on rain-grown cotton production were trait and growth-stage specific. Number of rainy days and solar radiation were identified as the most influential environmental factors for fibre yield traits, vapour pressure deficit at maximum daily temperature was the most influential factor for majority of fibre quality traits. However, each analysed trait was influenced by multiple environmental factors across multiple growth stages (rather than a single factor or a single growth stage). These influential covariates explained a wide range of variation in the traits, accounting for 5.8% to 68.2%. Using the best-fit random forest model, our findings revealed non-linear relationships between key environmental covariates and the traits. Conclusions Environmental factors at different rain-grown cotton growth stages are key determinants for the performance of end-of-season fibre yield and fibre quality parameters. These findings highlight the need to account for environment conditions when developing cotton varieties optimised for rain-grown production systems. Potential strategies are proposed whereby these key environmental factors can be used to increase the rate of genetic gain in rain-grown cotton production systems. Implications The results of this study will be crucial for future genetic evaluations and analyses of genotype-by-environment interaction effects in rain-grown cotton, which must account for the influence of the environment on plant performance. Furthermore, these methods can be applied to other species to identify critical growth stages and environmental factors which most influence crop performance.