Academic Intelligence · Curated Daily

探索全球前沿学术脉络

AcademicHub 汇聚顶级期刊与预印本平台的实时文献。定制您的专属科研雷达,利用大语言模型自动生成交叉领域文献分析简报。

01.
arXiv (CS.CV) 2026-06-11

Finding Sparse Subnetworks in One Training Cycle via Progressive Magnitude-Based Pruning

Neural network pruning reduces model size by removing less important parameters while aiming to preserve predictive performance. Although the Lottery Ticket Hypothesis (LTH) shows that sparse subnetworks can match dense networks when trained from suitable initializations, its iterative pruning procedure requires multiple complete training cycles. This work evaluates progressive magnitude-based pruning as a single-cycle alternative. The method gradually increases sparsity during training using a linear schedule and updates pruning masks based on active weight magnitudes. We conduct systematic experiments on CIFAR-10 and MNIST across ResNet, VGG-style, and LeNet architectures, comparing the proposed method with representative iterative and initialization-based pruning baselines, including LTH, SNIP, and GraSP. On CIFAR-10, the method achieves 95.12\% accuracy on ResNet-18 at 72.9\% sparsity, compared with 90.5\% reported for LTH. At extreme sparsity, it achieves 93.13\% accuracy on a VGG-like architecture at 97\% sparsity, compared with approximately 92.0\% for SNIP, and 93.44\% accuracy on VGG-19 at 97.97\% sparsity, compared with 92.19\% for GraSP at 98\% sparsity. A sparsity-accuracy analysis on ResNet-18 further shows that accuracy remains within 0.1 percentage points of the dense baseline across 70–85\% sparsity. These results indicate that progressive magnitude-based pruning provides an effective single-cycle approach for neural network sparsification under the evaluated settings.

02.
Nature (Science) 2026-06-10

Efficient and accurate neural-field reconstruction using resistive memory

作者:

Applications such as medical imaging, augmented and virtual reality, and embodied artificial intelligence (AI) depend on the ability to reconstruct complex signals from sparse observations. These applications are characterized by incomplete measurements and limited computational resources. Traditional approaches to digital hardware face the following challenges: explicit signal representations require heavy sampling and storage, data movement across the von Neumann bottleneck dominates energy and latency, and CMOS (complementary metal–oxide–semiconductor)-based circuits offer limited parallel efficiency. Here we present a software–hardware co-optimization framework for sparse-input signal reconstruction. At the software level, we use neural fields1 to implicitly represent signals using neural networks, which are further compressed by low-rank decomposition and structured pruning. At the hardware level, we design a resistive-memory-based computing-in-memory platform, featuring a Gaussian encoder and a multi-layer perceptron processing engine. The Gaussian encoder leverages the intrinsic stochasticity of resistive memory for efficient encoding, whereas the processing engine enables precise weight mapping through a hardware-aware quantization circuit. On a 40-nm 256 Kb resistive-memory macro, the system delivers 23.5×, 21.0× and 32.3× gains in projected energy efficiency, together with 10.8×, 38.8× and 6.2× gains in projected parallelism, for three-dimensional computed tomography sparse reconstruction, novel view synthesis and dynamic-scene novel view synthesis, without compromising on reconstruction quality. This work advances AI-driven signal reconstruction technology and paves the way for future efficient and robust medical AI and three-dimensional vision applications. A co-optimized AI hardware–software system using resistive-memory computing improves energy efficiency and parallelism for sparse signal reconstruction in imaging and three-dimensional vision applications.

03.
arXiv (CS.AI) 2026-06-16

MBABench: Evaluating LLM Agents on End-to-End Spreadsheet Tasks in Finance

arXiv:2605.22664v3 Announce Type: replace Abstract: LLM agents are increasingly expected to carry out end-to-end workflows, producing complete artifacts from high-level user instructions. To meet enterprise needs, frontier AI labs have developed agents that can construct entire spreadsheets from scratch. This is especially relevant in finance, where core workflows such as financial modeling, forecasting, and scenario analysis are commonly conducted through spreadsheets. Yet, existing spreadsheet benchmarks do not measure this advanced capability, focusing instead on question-answering or single-formula edits. To address this gap, we provide one of the first evaluations of agents on end-to-end spreadsheet tasks, focusing on economically critical financial workflows such as modeling and scenario analysis. Since deliverables therein are routinely reviewed and revised by multiple stakeholders, judging their quality necessarily involves high-level criteria such as readability or ease of modification. To reflect the multidimensional nature of solution quality, we develop an evaluation taxonomy comprising three dimensions: Accuracy, Formula, and Format, each comprising fine-grained criteria that reflect professional standards. The Claude family leads the benchmark and produces the most professional-looking outputs in our qualitative review, but even the strongest agents frequently fall short of professional finance standards and degrade sharply as the difficulty increases beyond a few chained calculations. This suggests that current agents are not yet able to reliably produce professional-quality spreadsheets at the level of complexity real-world workflows demand.

04.
arXiv (CS.AI) 2026-06-19

FlowFake: Liquid Networks for Audio Deepfake Detection

arXiv:2606.19579v1 Announce Type: cross Abstract: Audio deepfakes generated by neural text-to-speech and voice-cloning systems threaten speaker verification and public discourse at scale. The core challenge is cross-dataset generalization: detectors trained on one synthesis pipeline collapse on unseen forgeries. We argue that this failure is primarily because of structural synthetic speech artifacts which are multi-timescale trajectory anomalies. Though every existing detector aggregates a fixed-window frame statistics, this misaligns the architecture with the signal. We propose FlowFake, a Liquid Time-Constant (LTC) architecture whose hidden state evolves via a learned ODE, with per-neuron adaptive time constants simultaneously resolving spectral (10ms) and prosodic (2s) cues. At only 34K parameters FlowFake achieves formal BIBO stability and O(dt^4) integration error. On a four-dataset cross domain benchmark (ASVspoof2019-LA, FakeOrReal, InTheWild, MLAAD), FlowFake reaches 75.29% on ASVspoof2019 trained only on FakeOrReal and 79.97% trained only on MLAAD. It outperforms RawGAT-ST and Whisper-DF on every evaluated pair and matching SSL Wav2vec2 (300x larger) at 0.01% of its parameter count. The source code is available on : https://github.com/GhostRider2023/FlowFake

05.
arXiv (CS.CV) 2026-06-15

IndustryBench-MIPU: Benchmarking Multi-Image Attribute Value Extraction for Industrial Products

Industrial products such as valves and circuit breakers are defined by dense technical specifications that govern procurement, compatibility, and safety across supply chains. These specifications are scattered across multiple heterogeneous product images, including specification tables, nameplates, and technical drawings, yet whether Multimodal Large Language Models (MLLMs) can reliably recover them remains underexplored. To fill this gap, we introduce IndustryBench-MIPU, the first large-scale benchmark for multi-image industrial product understanding, built around structured attribute extraction – recovering property-value pairs from product images. This task jointly probes text recognition on specification tables and nameplates, visual reasoning over technical drawings, domain knowledge to decode industrial terminology, and cross-image evidence integration to assemble scattered specifications. Concretely, the benchmark comprises 4,559 products across 27,652 images with 103,703 annotations spanning 18 industrial categories, constructed through multi-model consensus and three-tier quality assurance. Evaluating nine MLLMs under both single-image and product-level multi-image settings reveals a stark completeness gap: models achieve high precision (86–94%) but the best recovers only 49.9% of product-level attributes; moving from single-image to multi-image extraction costs 15–34 percentage points of recall. Multi-image completeness, not single-image accuracy, is the core bottleneck. Dataset and code are publicly available.

06.
arXiv (CS.LG) 2026-06-11

Renewable Lasso without Batch-Number Constraints: A Gradient-Enhanced Approach

arXiv:2606.11738v1 Announce Type: cross Abstract: We study online estimation for high-dimensional generalized linear models with streaming data. First, for the non-distributed setting, we propose a gradient-enhanced surrogate loss that approximates the cumulative loss using only historical summaries, which modifies and improves upon the existing renewable estimation approach for the same model in the high-dimensional setting, and removes the batch-number constraint in previous studies. We then extend the method to distributed streaming data under the master-client architecture, where batches are partitioned across sites and only summaries (gradient vectors) are exchanged. Instead of directing applying the popular method of Jordan et al. (2019) to the surrogate quadratic loss, our adjusted approach does not require the clients to compute the full surrogate loss. We derive non-asymptotic error bounds under the high-dimensional scaling, without the stringent constraint on the number of batches in the previous studies. Simulation results under linear and logistic models, together with a real-data application, show improved accuracy over existing renewable estimators.

07.
arXiv (quant-ph) 2026-06-11

Measurement incompatibility and quantum steering via linear programming

arXiv:2506.03045v3 Announce Type: replace Abstract: The problem of deciding whether a set of quantum measurements is jointly measurable is known to be equivalent to determining whether a quantum assemblage is unsteerable. This problem can be formulated as a semidefinite program (SDP). However, the number of variables and constraints in such a formulation grows exponentially with the number of measurements, rendering it intractable for large measurement sets. In this work, we circumvent this problem by transforming the SDP into a hierarchy of linear programs that compute upper and lower bounds on the incompatibility robustness with a complexity that grows polynomially in the number of measurements. The hierarchy is guaranteed to converge and it can be applied to arbitrary measurements – including non-projective POVMs (Positive Operator-Valued Measures) – in arbitrary dimensions. While convergence becomes impractical in high dimensions, in the case of qubits our method reliably provides accurate upper and lower bounds for the incompatibility robustness of sets with several hundred measurements in a short time using a standard laptop. We also apply our methods to qutrits, obtaining non-trivial upper and lower bounds in scenarios that are otherwise intractable using the standard SDP approach, although such bounds are significantly looser than the ones obtained in the qubit case. Finally, we show how our methods can be used to construct local hidden state models for states (i.e., to prove that a state cannot lead to steering under any possible local measurements), or conversely, to certify that a given state exhibits steering; for two-qubit quantum states, our approach is comparable to, and in some cases outperforms, the current best methods.

08.
arXiv (CS.AI) 2026-06-11

Geometric Erasure by Contrastive Velocity Matching in Rectified Flows

arXiv:2606.00140v2 Announce Type: replace-cross Abstract: While the rapid adoption of multimodal generative models offers immense potential, it has also increased the risks of harmful content synthesis, deepfakes, and copyright infringements. To address these challenges, concept erasure has emerged as a prospective safeguard. However, as the field gradually transitions from U-Net-based diffusion models to Rectified Flow Transformers, erasure research has struggled to keep pace. In this work, we introduce GEM, a simple but highly effective erasure framework for Rectified Flow models. As part of our contribution, we establish a principled bridge between trajectory-based unlearning grounded in Generative Flow Networks and classic teacher-guided erasure: we translate trajectory-based signals into a teacher-guided flow-matching setup that unifies the strengths of both paradigms. Concretely, a teacher provides complementary attraction and repulsion signals that we combine into a single geometric guidance objective, yielding targeted suppression of unwanted concepts while preserving benign generation.

09.
arXiv (quant-ph) 2026-06-16

Information Is Not Physical: Possibility Spaces, Erasure, and the Structure of Unrealized Alternatives

arXiv:2606.15120v1 Announce Type: cross Abstract: The slogan ``information is physical,'' introduced by Rolf Landauer and developed through quantum information theory and black-hole thermodynamics, has achieved near-axiomatic status in modern physics. Yet the ontological status of information remains surprisingly underexamined: most discussions either reduce information to a form of energy or treat it as a purely mathematical object. This paper proposes a third position. I argue that information is neither a physical substance nor a free-floating abstraction, but rather the structure of physically realizable alternatives – a counterfactual structure that a physical system instantiates in virtue of the possibility space available to it. Building on Shannon's combinatorial definition, the Landauer principle, the no-cloning theorem, and the black-hole information paradox, I show that the informational content of any physical event is constituted by the set of outcomes that could have occurred but did not. This counterfactual reading dissolves several persistent confusions: it explains why erasing information dissipates heat without making information ``material,'' why quantum superposition is informationally richer than any classical mixture, and why information loss in black holes is physically significant beyond mere bookkeeping. The proposal sits within a structural-realist framework but departs from standard structural realism by locating the relevant structure in modal, not merely actual, relations. I conclude by sketching implications for the foundations of quantum mechanics, quantum gravity, and scientific ontology more broadly.

10.
arXiv (CS.CV) 2026-06-16

MambaH-Fit: Rethinking Hyper-surface Fitting-based Point Cloud Normal Estimation via State Space Modelling

We present MambaH-Fit, a state space modelling framework tailored for hyper-surface fitting-based point cloud normal estimation. Existing normal estimation methods often fall short in modelling fine-grained geometric structures, thereby limiting the accuracy of the predicted normals. Recently, state space models (SSMs), particularly Mamba, have demonstrated strong modelling capability by capturing long-range dependencies with linear complexity and inspired adaptations to point cloud processing. However, existing Mamba-based approaches primarily focus on understanding global shape structures, leaving the modelling of local, fine-grained geometric details largely under-explored. To address the issues above, we first introduce an Attention-driven Hierarchical Feature Fusion (AHFF) scheme to adaptively fuse multi-scale point cloud patch features, significantly enhancing geometric context learning in local point cloud neighbourhoods. Building upon this, we further propose Patch-wise State Space Model (PSSM) that models point cloud patches as implicit hyper-surfaces via state dynamics, enabling effective fine-grained geometric understanding for normal prediction. Extensive experiments on benchmark datasets show that our method outperforms existing ones in terms of accuracy, robustness, and flexibility. Ablation studies further validate the contribution of the proposed components.

11.
arXiv (CS.AI) 2026-06-19

AI4SE and SE4AI Exploration: A Decade Looking Back and Forward

arXiv:2606.19630v1 Announce Type: new Abstract: The March 2020 INCOSE INSIGHT special issue on AI and Systems Engineering (SE) became the most downloaded issue in the publication's history and launched a research community that now draws over 250 registrants to its annual workshop. In this article, we trace the progress in AI and SE across three phases (labeled here foundational, applied, and LLM inflection) based on the authors' reading of the field's core papers, and describe our opinions of where the community has converged and where critical gaps remain. Separately, a human-AI agreement literature review leveraging both human expertise and six AI models was performed to assess the relevance of 1,712 INCOSE INSIGHT articles and 889 SERC publications. The results identify five critical research gaps and offer guidance for practitioners navigating AI adoption, assurance, and workforce transformation in SE. We share the agreement data and the AI4SE/SE4AI Explorer web application so readers can compare their own relevance judgments with the human and AI raters.

12.
arXiv (CS.CV) 2026-06-16

ScoutVLA: UAV-Centric Active Perception via a Dual-Expert VLA Model for Open-World Embodied Question Answering

Aerial Embodied Question Answering (EQA) requires Unmanned Aerial Vehicles (UAVs) to actively perceive the environment and answer natural language questions. Existing outdoor EQA systems usually stop once the target enters the UAV's field of view, leaving the fine-grained viewpoint adjustment needed for evidence-seeking questions largely unresolved. To address this issue, we introduce FG-EQA, a fine-grained active perception EQA benchmark with more than 40K simulated trajectories and 1K real-world trajectories. Drawing inspiration from the ``waggle dance'' of scout bees, which iteratively adjust their flight paths to verify target information, we propose ScoutVLA, an evidence-driven Vision-Language-Action model for outdoor EQA. To emulate this active exploration behavior, ScoutVLA features a decoupled dual-expert architecture: a vision-language expert infers the semantic intent to identify missing evidence, while an independent action expert employs high-DoF flow matching to generate continuous viewpoint-refinement trajectories. To balance the competing demands of continuous control and semantic reasoning, we devise a decoupled training strategy with a knowledge insulation mechanism that prevents the action gradients from erasing the model's multimodal reasoning ability. Extensive simulated experiments and a qualitative real-world field study both verify the superiority of ScoutVLA over the state-of-the-art baselines, demonstrating a 10.48$\boldsymbol{\times}$ higher average strict success rate and a 7.72$\boldsymbol{\times}$ higher average QA correctness.

13.
arXiv (quant-ph) 2026-06-19

Inhibited radiative decay enhances single-photon emitters

arXiv:2511.23301v2 Announce Type: replace Abstract: Quantum networks and modular quantum computers require efficient spin-photon interfaces, often realized using optical resonators that enhance radiative decay on a desired transition. However, this requires small mode volumes and high quality factors, which limits multiplexing capacity and demands precise frequency tuning. Here, we demonstrate an alternative approach that circumvents these bottlenecks for upscaling. Using a W1 silicon photonic crystal waveguide with a tailored photonic bandgap, we selectively inhibit unwanted decay pathways, thereby redirecting emission to the desired transition. This enables efficient photon collection over a large frequency range, allowing the resolution and individual addressing of tens of erbium dopants. Their lifetimes are preserved, or even increased, compared to bulk material. The extended mode volume of the devices enables the use of lower dopant concentrations, thereby improving emitter coherence. Our approach can be combined with Purcell enhancement and applied to other spin-qubit platforms, opening intriguing perspectives for photonic quantum technologies.

14.
arXiv (quant-ph) 2026-06-11

Exact Entanglement Dynamics Beyond Nearest-Neighbor Dual-Unitary Floquet Systems

作者:

arXiv:2606.11311v1 Announce Type: new Abstract: Exact results using dual-unitarity largely rely on nearest-neighbor structures, while finite-range interactions typically lead to complications. Going beyond the usual nearest-neighbor setting, we introduce an analytically tractable family of finite-range kicked Ising models that admit exact closed-form entanglement dynamics. The construction is based on a staggered structure in which dual-unitarity is present on sublattices that are then coupled to each other. The central observation is that these inter-sublattice couplings do not obstruct the dual-unitarity of the resulting model. For the minimal interaction range of $r= 2$, we derive exact expressions for all the $n-$Rényi entanglement entropies at all times and show that the result is the sum of the two coupled sublattice contributions. Our framework extends naturally to larger finite interaction ranges and to systems with heterogeneous local Hilbert spaces, without additional assumptions. It thus provides a controlled setting for studying exact entanglement growth beyond strictly nearest-neighbor dual-unitary models.

15.
arXiv (CS.CV) 2026-06-16

BRDFusion: Physics Meets Generation for Urban Scene Inverse Rendering

Inverse rendering of urban scenes from captured videos enables numerous applications, including content creation and autonomous driving simulation. Physically-based rendering methods follow and control lighting physics, but suffer from reconstruction and rendering artifacts. While generative models produce realistic videos, they offer limited consistency and controllability. We present BRDFusion, a unified framework that combines two complementary models for inverse and forward rendering. Specifically, BRDFusion recovers explicit, consistent scene properties with physical modeling and alleviates optimization ambiguity with generative priors. During forward rendering, the physical model provides controllable rendering from the scene configuration, and the generative model denoises and fixes artifacts. Therefore, our method produces high-quality videos while allowing precise control, outperforming baselines in real and synthetic scenes. Moreover, BRDFusion supports novel-view relighting, night simulation, and dynamic object insertion/editing. Project page: https://shigon255.github.io/brdfusion-page/

16.
bioRxiv (Bioinfo) 2026-06-17

DesignMaster: A Multi-Conditional Diffusion Framework for Rational PROTAC Design

Motivation: Proteolysis-targeting chimeras (PROTACs) enable targeted protein degradation through ternary complex formation with E3 ubiquitin ligase. However, the rational design of PROTACs remains highly challenging due to limited structure-activity relationship data and the vast conformational diversity of linkers. Existing computational approaches can be broadly divided into structure-based ternary modelling methods and fragment-based linker generation models. Although these approaches have advanced PROTAC design, they typically neglect key physicochemical constraints and linker-length control during the generation process, causing the generated PROTACs to lack balanced structural properties required for effective ternary complex formation with drug-like characteristics. Results: To address these limitations, we propose DesignMaster, a diffusion-based generative framework that explicitly incorporates linker length and physicochemical properties as controllable conditioning signals. DesignMaster employs an E(3)-equivariant graph Transformer with a gated multi-condition fusion module to inject linker length and physicochemical constraints throughout the diffusion process, enabling fine-grained and constraint-aware molecular generation. Experiments on PROTAC-DB 2.0 and 3.0 demonstrate that DesignMaster outperforms state-of-the-art baselines, with a 3.2% improvement in validity and a 34.4% improvement in recovery. The Case study shows DesignMaster achieves a 51.78% reduction in RMSD when predicting the linker of PROTAC BCPyr targeting 6W7O, highlighting its potential for practical structure-guided PROTAC design. Availability: The source code and datasets are available at https://github.com/ABILiLab/DesignMaster.

17.
arXiv (CS.CL) 2026-06-11

When Generic Prompt Improvements Hurt: Evaluation-Driven Iteration for LLM Applications

Evaluating Large Language Model (LLM) applications differs from conventional software testing because outputs are probabilistic, semantically variable, and sensitive to prompt and model changes. This technical report proposes the Minimum Viable Evaluation Suite (MVES), an audit-oriented structure for application-level LLM evaluation. MVES links application categories to failure modes, metrics, required artifacts, and validation evidence across general LLM applications, retrieval-augmented systems, and agentic workflows. We pair the framework with a reproducible local evaluation harness covering structured extraction, RAG citation/content-compliance, and instruction-following checks. Using Ollama with Llama 3 8B Instruct and Qwen 2.5 7B Instruct, we evaluate five prompt conditions over expanded 30-case-per-suite ablations. The results show that, in the tested local conditions, generic prompt additions do not produce monotonic improvements: stronger output-contract prompts improve strict extraction for both models, while RAG citation/content-compliance declines under some generic-rule conditions. The largest observed decline occurs for Qwen 2.5 on RAG when generic rules are appended to the user prompt, from 26/30 to 9/30. These findings support evaluation-driven prompt iteration: prompt changes should be treated as potential regression risks and tested against task-specific suites before deployment. The accompanying repository contains the test suites, prompt variants, evaluation harness, raw result logs, and scripts needed to reproduce the reported local ablations.

18.
arXiv (CS.LG) 2026-06-19

Entropy Estimation in Multi-Qutrit Systems via Variational and Classical Neural Networks

arXiv:2606.20504v1 Announce Type: cross Abstract: We present a systematic study of von Neumann entropy estimation in multi-qutrit quantum systems using two complementary approaches: variational quantum algorithms (VQAs) and classical convolutional neural networks (CNNs), evaluated using an ideal (noise-free) quantum simulator. For systems up to three qutrits, we construct and evaluate 11 hardware-efficient SU(3)-inspired ansatzes. A parameter sweep shows that estimation accuracy is primarily determined by the number of trainable parameters, provided sufficient entanglement is present. Based on this study, we fix the parameter count to approximately 120 for subsequent experiments, observing that increasing entangling-gate counts beyond a threshold yields only marginal improvements. For larger systems (two to five qutrits), we use a CNN trained on measurement outcomes from tensor-product mutually unbiased bases. The model achieves accurate and stable predictions and exhibits a systematic improvement in performance with system size, with the highest errors for two-qutrit systems and the lowest for five-qutrit systems. Notably, using only 12.5% of the measurements required for full state tomography is sufficient to reach 90th-percentile absolute errors of approximately 0.13-0.16 nats for both four- and five-qutrit systems. The CNN model is also robust to shot noise and generalizes well to out-of-distribution states. Overall, within the simulated settings studied here, our results indicate a transition in practical methods: VQAs are effective for small systems, while CNN-based estimators offer improved scalability and robustness for larger qutrit systems.

19.
arXiv (CS.CV) 2026-06-12

Budget-Constrained Step-Level Diffusion Caching

Step-level caching accelerates diffusion models by exploiting temporal redundancy across denoising steps. Existing methods make per-step cache decisions using threshold-based heuristics, without directly optimizing for final output quality. As a result, their inference latency varies across inputs and is difficult to control at deployment. In this work, we propose BudCache, which inverts this formulation: rather than letting per-step error thresholds dictate the runtime cost, we fix the compute budget in advance and search for the cache policy that best preserves the final output. To tackle the combinatorial complexity of step selection, we combine Simulated Annealing with deterministic Hill Climbing. This offline search identifies high-quality cache policies within minutes and introduces no online search or thresholding overhead during inference. When the compute budget is very tight, we further introduce cache-aware schedule alignment, which adapts the time discretization to the selected cache policy to reduce cache-induced trajectory mismatch. Experiments on FLUX.1-dev and Wan2.1 show that BudCache achieves better generation quality than heuristic caching baselines under the same inference budgets. Code is available at https://github.com/Westlake-AGI-Lab/BudCache

20.
arXiv (CS.CV) 2026-06-19

Hierarchical mutual distillation for multi-view fusion: Learning from all possible view combinations

Multi-view learning often struggles to effectively leverage images captured from diverse angles and locations. Learning methods for unstructured multi-view images remain largely underexplored. We propose a novel Hierarchical Mutual Distillation for Multi-View Fusion (HMDMV) method, which can handle both structured and unstructured multi-view scenarios. It makes predictions utilizing all possible view combinations: single view, partial multi-view, and full multi-view. The method generates predictions for each view combination and then applies hierarchical mutual distillation to enhance inter-view consistency. An uncertainty-based weighting mechanism further refines the fusion process by adjusting the influence of each view combination according to its prediction confidence, reducing the impact of low-confidence views. Extensive experiments on large-scale structured and unstructured datasets demonstrate that HMDMV consistently achieves state-of-the-art classification accuracy. Another unique advantage of HMDMV is that it provides improved flexibility in inference, allowing for more or fewer view counts in inference than those used in training without additional processing. We also provide a light version with reduced training cost by designing an efficient strategy that randomly samples subsets of view combinations during each training iteration. These results highlight HMDMV's robustness in real-world settings where view availability is variable or incomplete. The code is available at https://github.com/labhai/HMDMV.

21.
Nature (Science) 2026-06-22

Isotopic evidence for a cold and distant origin of 3I/ATLAS

Interstellar objects provide the only directly observable samples of icy planetesimals formed around other stars, and can therefore provide insight into the diversity of physical and chemical conditions occurring during exoplanet formation1−3. Here we report isotopic measurements of the interstellar comet 3I/ATLAS, which reveal an elemental composition unlike any Solar System body. The water in 3I/ATLAS is enriched in deuterium, at a level of D/H = (0.98 ± 0.06)%, which is more than an order of magnitude higher than in known comets, while its range of 12C/13C ratios (141–191 for CO2 and 123–172 for CO) exceeds typical values found in the Solar System, as well as nearby interstellar clouds and protoplanetary disks. Such extreme isotopic signatures indicate formation at temperatures  ≲ 30 K in a relatively metal-poor environment. When interpreted with respect to models for Galactic chemical evolution, the carbon isotopic composition implies that 3I/ATLAS may have accreted as long ago as 12 billion years, following a period of intense, early star formation. 3I/ATLAS thus represents a preserved fragment of an ancient planetary system.

22.
arXiv (CS.LG) 2026-06-16

CacheMuon: Using Temporal Preconditioning To Approximate Polar Factor

arXiv:2606.16371v1 Announce Type: new Abstract: Muon is an optimizer that computes updates using the polar factor of the momentum matrix and has shown strong empirical performance across a range of training settings. A key component of Muon is the Newton-Schulz iteration used to compute this polar factor. Although this avoids the cost of an exact singular value decomposition, it remains expensive in practice because it is applied at every optimization step. At the same time, the momentum matrix changes smoothly over training, suggesting strong temporal correlation in the corresponding polar factors. In this paper, we exploit this structure and propose CacheMuon, a temporal preconditioning method that reuses information from previous optimization steps to approximate the polar factor at the current step. This reduces redundant orthogonalization computation across iterations. We analyze CacheMuon as an inexact Muon update, with error controlled by fresh-solver error and cache staleness. Empirically, CacheMuon provides a controllable quality-efficiency frontier: conservative thresholds closely match fresh Muon on language-model and vision training while reducing orthogonalization FLOPs, whereas more aggressive thresholds yield larger arithmetic savings at the cost of modest validation-quality degradation.

23.
arXiv (CS.LG) 2026-06-18

Clustering and Pruning in Causal Data Fusion

arXiv:2505.15215v3 Announce Type: replace-cross Abstract: Data fusion, the process of combining observational and experimental data, can enable the identification of causal effects that would otherwise remain non-identifiable. Although identification algorithms have been developed for specific scenarios, do-calculus remains the only general-purpose tool for causal data fusion, particularly when variables are present in some data sources but not others. However, approaches based on do-calculus may encounter computational challenges as the number of variables increases and the causal graph grows in complexity. Consequently, there exists a need to reduce the size of such models while preserving the essential features. For this purpose, we propose pruning (removing unnecessary variables) and clustering (combining variables) as preprocessing operations for causal data fusion. We generalize earlier results on a single data source and derive conditions for applying pruning and clustering in the case of multiple data sources. We give sufficient conditions for inferring the identifiability or non-identifiability of a causal effect in a larger graph based on a smaller graph and show how to obtain the corresponding identifying functional for identifiable causal effects. Examples from epidemiology and social science demonstrate the use of the results.

24.
arXiv (CS.CV) 2026-06-16

RGFVR: Reference-Guided Face Video Restoration with Flow Matching

Face video restoration from degraded observations is challenging, as it requires simultaneously recovering visual fidelity, temporal consistency, and subject identity. Existing approaches are often either reference-free, which can lead to identity loss when person-specific facial details are lost, or subject-specific, which limits generalization to unseen identities. We propose a subject-agnostic, reference-guided framework for identity-preserving face video restoration. Our method introduces bimodal perceptual-descriptive identity conditioning into a pretrained flow-based text-to-video generator and employs a two-stage training strategy to strengthen identity guidance during restoration. Experiments show that our approach improves restoration fidelity, temporal consistency, and identity preservation, achieving superior performance under challenging video degradations, including downsampling, blur, noise, and compression artifacts. The code is available under: https://github.com/batuhanntosun/RG-FVR.

25.
arXiv (CS.LG) 2026-06-11

Integral Formulation of QENDy for Robust Nonlinear System Identification

arXiv:2606.11629v1 Announce Type: cross Abstract: This manuscript proposes an integral formulation of the newly defined quadratic embedding method for identifying nonlinear systems (QENDy). In the original algorithm, trajectory data points along with their time derivatives are used. Methods for calculating time derivatives make the algorithm sensitive to noise. Our integral formulation does not use the time derivatives. This results in a more robust method to learn the dynamics.