探索全球前沿学术脉络

01.

arXiv (quant-ph) 2026-06-19 DOI: arXiv:2606.19730

Topological Quantum Interferometry

作者:

Tianyou Ying↗Yufeng Zhou↗Chengwei Pan↗Ryan Hogan↗Ruoyang Zhang↗Hui Liu↗Shining Zhu↗Xiaoqin Gao↗

arXiv:2606.19730v1 Announce Type: new Abstract: Structured light provides high-dimensional Hilbert spaces holding tremendous potential for fundamental quantum optics and quantum technologies. However, existing characterization methods, like Hong-Ou-Mandel (HOM) interference, typically assume perfectly tuned conditions, overlooking the geometric physics governing spatial mode evolution. Here, we establish topological quantum interferometry driven by an interaction-based geometric phase, the exchange Berry phase (BPX). Our formalism generalizes $q$-plate state generation and characterization to arbitrary topological charges and (de)tuning conditions, demonstrating that BPX acts as a geometric marker governing spatial interference. We show BPX serves as a deterministic control parameter, decomposing two-photon spatial patterns into geometry-dictated fundamental modes. This mapping reveals topological invariants and phase singularities that function as a non-tomographic witness for state dimensionality estimation, circumventing full-state reconstruction. Being device-independent and highly scalable, this approach enables scalable high-dimensional characterization and topologically protected state selection, with direct applicability to quantum metrology and high-capacity quantum networks.

阅读与讨论 → 访问原文 →

02.

arXiv (CS.AI) 2026-06-16 DOI: arXiv:2606.14838

A Definition of Good Explanations and the Challenges Explaining LLM Outputs

作者:

Louis Mahon↗Elliot Ford↗Callum Hackett↗

arXiv:2606.14838v1 Announce Type: new Abstract: How to define a good explanation is a long-standing philosophical debate which has found recent renewed interest in the context of AI outputs. Explainability is crucial for AI adoption in many contexts, but in order to produce good explanations of AI systems, we must first have an understanding of what good explanations are. In this paper we propose a definition inspired by the notion of counterfactual explanations, however we argue that one must also take into account the interlocutor's prior beliefs in each fact that could be offered in an explanation. We explore the ramifications of this definition for AI explainability and, in particular, why LLM outputs are difficult to produce good explanations for.

阅读与讨论 → 访问原文 →

03.

arXiv (CS.CL) 2026-06-19 DOI: arXiv:2606.19351

Detecting Hallucinations for Large Language Model-based Knowledge Graph Reasoning

作者:

Xinyan Zhu↗Yaoqi Liu↗Yue Gao↗Huadong Ma↗Cheng Yang↗Chuan Shi↗

Knowledge graph (KG) reasoning infers new knowledge from existing facts and is widely applied in question answering, recommendation, and decision support. With the rapid development of large language models (LLMs), LLM-based KG reasoning frameworks have become increasingly popular by leveraging retrieved KG information. However, hallucinations in LLMs remain a critical issue. Even when relevant KG knowledge is incorporated, models may still generate incorrect outputs, leading to misinformation and unreliable decisions. Existing hallucination detection methods either focus on LLM internal states or verify consistency with retrieved contexts, but both overlook the structural information in KGs, resulting in suboptimal performance. To address this gap, we propose LUCID, the first halLUcination deteCtIon method for LLM-based knowleDge graph reasoning frameworks. LUCID jointly leverages LLM attention scores, KG semantics, and structural information. Specifically, it extracts node and edge features from attention scores and semantic similarities, and integrates them with KG structure using a graph neural network. We also construct manually annotated benchmark datasets for evaluation. Experiments on nine datasets show that LUCID achieves state of the art performance compared to 15 baselines.

阅读与讨论 → 访问原文 →

04.

arXiv (CS.CL) 2026-06-15 DOI: arXiv:2606.14030

Efficiency-Performance Trade-offs in Neural Speaker Diarization via Structured Pruning and Low-Bit Quantization

作者:

Rishit Chatterjee↗Tahiya Chowdhury↗

Streaming speaker diarization is crucial for time-critical medical dispatch, but deploying it on resource-constrained hardware requires smaller, faster models. Using SIMSAMU, a dataset of simulated medical-dispatch conversations, we evaluate streaming behavior before compressing the segmentation model with pruning and low-bit quantization. We characterize performance across a range of streaming latency budgets and find that additional buffering is not consistently beneficial, while very low-latency operating points can substantially degrade performance. Our study shows that model compression trades performance for memory footprint, and we highlight an operating point where FP16 reduces model size by half with essentially unchanged real-time factor, at a cost of a 40\% relative DER increase against the baseline. This work characterizes the trade-offs for real-time deployment and contributes to speech technology that can enable reliable human communication in time-critical contexts.

阅读与讨论 → 访问原文 →

05.

arXiv (CS.CV) 2026-06-18 DOI: arXiv:2604.05527

Prior-guided Fusion of Multimodal Features for Change Detection from Optical-SAR Images

作者:

Xuanguang Liu↗Lei Ding↗Yujie Li↗Chenguang Dai↗Zhenchao Zhang↗Mengmeng Li↗Ziyi Yang↗Yifan Sun↗Yongqi Sun↗Hanyun Wang↗Lorenzo Bruzzone↗

Multimodal change detection (MMCD) identifies changed areas in multimodal remote sensing data, demonstrating significant application value in land use monitoring and urban sustainable development. However, literature MMCD approaches exhibit limitations in both cross-modal interaction and exploiting modality-specific characteristics. This leads to insufficient modeling of fine-grained change information, thus hindering the precise detection of semantic changes. To address these problems, we propose STSF-Net, a framework designed for MMCD between optical and SAR images. STSF-Net jointly models modality-specific and spatio-temporal common features to enhance change representations. Specifically, modality-specific features are exploited to capture genuine semantic change signals, while spatio-temporal common features are embedded to suppress pseudo-changes caused by differences in imaging mechanisms. Furthermore, we introduce an optical and SAR feature fusion strategy that adaptively adjusts multimodal feature importance based on semantic priors obtained from visual foundation models. Finally, we introduce the novel Delta-SN6 dataset, the first openly-accessible multiclass MMCD benchmark consisting of very-high-resolution fully polarimetric SAR and optical images. Experimental results on Delta-SN6, BRIGHT, and Wuhan datasets demonstrate that our method outperforms the state-of-the-art by 3.21%, 0.87%, and 1.32% in mIoU, respectively.

阅读与讨论 → 访问原文 →

06.

arXiv (CS.AI) 2026-06-19 DOI: arXiv:2606.20517

Multi-LCB: Extending LiveCodeBench to Multiple Programming Languages

作者:

Maria Ivanova↗Pavel Zadorozhny↗Rodion Levichev↗Ivan Petrov↗Adamenko Pavel↗Ivan Lopatin↗Alexey Kutalev↗Dmitrii Babaev↗

arXiv:2606.20517v1 Announce Type: new Abstract: LiveCodeBench (LCB) has recently become a widely adopted benchmark for evaluating large language models (LLMs) on code-generation tasks. By curating competitive programming problems, constantly adding fresh problems to the set, and filtering them by release dates, LCB provides contamination-aware evaluation and offers a holistic view of coding capability. However, LCB remains restricted to Python, leaving open the question of whether LLMs can generalize across the diverse programming languages required in real-world software engineering. We introduce Multi-LCB, a benchmark for evaluating LLMs across twelve programming languages, including Python. Multi-LCB transforms Python tasks from the LCB dataset into equivalent tasks in other languages while preserving LCB's contamination controls and evaluation protocol. Because it is fully compatible with the original LCB format, Multi-LCB will automatically track future LCB updates, enabling systematic assessment of cross-language code generation competence and requiring models to sustain performance well beyond Python. We evaluated 24 LLMs for instruction and reasoning on Multi-LCB, uncovering evidence of Python overfitting, language-specific contamination, and substantial disparities in multilingual performance. Our results establish Multi-LCB as a rigorous new benchmark for multi-programming-language code evaluation, directly addressing LCB's primary limitation and exposing critical gaps in current LLM capabilities.

阅读与讨论 → 访问原文 →

07.

arXiv (CS.AI) 2026-06-16 DOI: arXiv:2606.15141

EChO-Agent: Evidence Chain Orchestration Agent for Audio Reasoning

作者:

Siyuan Zhang↗Jian Zong↗Junyu Wang↗Peiyuan Jiang↗Jiahao Yan↗Jingyu Zhang↗Tianrui Wang↗Xiaobao Wang↗Longbiao Wang↗Jianwu Dang↗

arXiv:2606.15141v1 Announce Type: cross Abstract: While LALMs show promise on audio question answering, they fail to focus on question-relevant segments of audio and provide a clear, checkable reasoning process when dealing with complex audio reasoning. Reinforcement learning and tool-augmented prompting can help models better relate questions to audio but lack a reliable way to understand, integrate, and self-verify audio segments. To address this gap, we present EChO-Agent, a modular agent framework that reformulates complex audio QA as a planning, tool execution, evidence integration, and answer verification workflow. Experiments on MMAR benchmark show EChO-Agent improves both accuracy and rubric scores over baseline and ablation studies show evidence integration is the key factor.

阅读与讨论 → 访问原文 →

08.

arXiv (math.PR) 2026-06-11 DOI: arXiv:2606.11758

Exact Fourier dimensions of dyadic Mandelbrot cascades on curves of nonvanishing curvature under minimal integrability

作者:

Yin Cai↗Xiang Fang↗Hongdou Qu↗

arXiv:2606.11758v1 Announce Type: new Abstract: We prove an exact Fourier-dimension formula for scalar dyadic Mandelbrot cascades pushed forward to fixed C^2 Jordan curves with nonvanishing curvature. Let W be in the minimal Kahane-Peyriere regime, let the scalar dyadic cascade live on T = R/Z, and let gamma map T to R^2 be a fixed C^2 Jordan curve with nonvanishing curvature, parametrized at constant speed. For the push-forward measure mu_gamma, we prove that, almost surely on non-extinction, its Fourier dimension is A_loc(W), the usual local exponent obtained by optimizing over q>1 from the moment expression involving E[W^q]. The upper bound follows from the scalar circle local-dimension theorem, bi-Lipschitz transfer to the fixed curve, and a deterministic curved-support obstruction for Fourier dimension. The lower bound follows from a fixed-curve finite-r annular theorem, which gives summable annular Fourier decay under a single finite moment witness. The main analytic input is a deterministic phase-geometry package for fixed nondegenerate C^2 curves: stationary tubes, derivative bands, and phase-bin coefficient estimates replacing the explicit trigonometric structure available on the unit circle.

阅读与讨论 → 访问原文 →

09.

arXiv (CS.AI) 2026-06-17 DOI: arXiv:2606.17664

Temporal Preference Optimization for Unsupervised Retrieval

作者:

HyunJin Kim↗Jaejun Shim↗Young Jin Kim↗JinYeong Bak↗

arXiv:2606.17664v1 Announce Type: cross Abstract: Unsupervised dense retrievers offer scalability by learning semantic similarity from unlabeled documents via contrastive learning, but they struggle to capture the temporal relevance, retrieving semantically related but temporally misaligned documents-an important aspect when a document collection spans multiple time periods (e.g., retrieving documents from 2018-2025 for "Who is the president in 2019?" introduces temporal ambiguity). Existing methods rely on supervised training with explicit timestamps, which are not always feasible. We propose TPOUR (Temporal Preference Optimization for Unsupervised Retriever), which uses our novel training method Temporal Retrieval Preference Optimization (TRPO). TRPO reinterprets preference learning in the temporal dimension, guiding the retriever to favor temporally aligned documents. TPOUR further generalizes to unseen time periods via interpolation in a learned time embedding, enabling continuous temporal alignment. Experiments on temporal information retrieval (T-IR), TPOUR outperforms both unsupervised and supervised baselines. Compared to Qwen-Embedding-8B, despite being about 72.7x smaller, TPOUR Contriever improves average nDCG@5 by +4.04 (+12.15%) on explicit and +4.98 (+15.21%) on implicit queries. We provide our code at https://github.com/agwaBom/TPOUR.

阅读与讨论 → 访问原文 →

10.

arXiv (CS.CL) 2026-06-12 DOI: arXiv:2510.16928

ChiKhaPo: A Large-Scale Multilingual Benchmark for Evaluating Lexical Comprehension and Generation in Large Language Models

作者:

Emily Chang↗Niyati Bafna↗

Existing benchmarks for large language models (LLMs) are largely restricted to high- or mid-resource languages, and often evaluate performance on higher-order tasks in reasoning and generation. However, plenty of evidence points to the fact that LLMs lack basic linguistic competence in the vast majority of the world's 3800+ written languages. We introduce ChiKhaPo, consisting of 8 subtasks of varying difficulty designed to evaluate the lexical comprehension and generation abilities of generative models. ChiKhaPo draws on existing lexicons, monolingual data, and bitext, and provides coverage for 2700+ languages for 2 subtasks, surpassing any existing benchmark in terms of language coverage. We further show that 6 SOTA models struggle on our benchmark, and discuss the factors contributing to performance scores, including language family, language resourcedness, task, and comprehension versus generation directions. With ChiKhaPo, we hope to enable and encourage the massively multilingual benchmarking of LLMs.

阅读与讨论 → 访问原文 →

11.

arXiv (CS.AI) 2026-06-16 DOI: arXiv:2605.21312

Frontier: Towards Comprehensive and Accurate LLM Inference Simulation

作者:

Yicheng Feng↗Xin Tan↗Yangtao Deng↗Yimin Jiang↗Yibo Zhu↗Hong Xu↗

arXiv:2605.21312v2 Announce Type: replace-cross Abstract: Modern LLM serving is no longer homogeneous or monolithic. Production systems now combine disaggregated execution, complex parallelism, runtime optimizations, and stateful workloads such as reasoning, agents, and RL rollouts. Simulation is attractive for exploring this growing design space, yet existing simulators lack the architectural completeness and decision-grade fidelity it demands. Their monolithic-replica abstractions are ill-suited to disaggregated serving, while average-case analytical proxies can distort SLA predictions and even reverse optimization conclusions. We present Frontier, a discrete-event simulator for modern LLM inference serving. Frontier features a disaggregated abstraction. It captures the structure and dynamics of modern serving systems by modeling co-location, Prefill-Decode Disaggregation (PDD), and Attention-FFN Disaggregation (AFD) with role-specific cluster workers, incorporating key runtime optimizations (e.g., CUDA Graphs, speculative decoding) within the scheduler-batch-engine loop, and supporting stateful requests for emerging workloads. It further provides accurate and generalizable predictions of computation, communication, and memory costs across diverse serving scenarios with complex workload compositions. On 16-H800 GPU testbed, Frontier achieves an average throughput error below 4%. Compared with state-of-the-art simulators, it reduces end-to-end latency error from 44.9% to 6.4% under co-location and from 51.7% to 2.6% under disaggregation. It scales to over 1K GPUs on commodity CPUs and enables new use cases such as SLA-dependent Pareto frontier exploration, heterogeneous disaggregated allocation, agentic reasoning scheduling validation, and RL post-training reconfiguration. We release Frontier at https://github.com/NetX-lab/Frontier.

阅读与讨论 → 访问原文 →

12.

arXiv (CS.CV) 2026-06-12 DOI: arXiv:2603.05965

PROBE: Probabilistic Occupancy BEV Encoding with Analytical Translation Robustness for 3D Place Recognition

作者:

Jinseop Lee↗Byoungho Lee↗Gichul Yoo↗

We present PROBE (PRobabilistic Occupancy BEV Encoding), a learning-free LiDAR place recognition descriptor that models each BEV cell's occupancy as a Bernoulli random variable. Rather than relying on discrete point-cloud perturbations, PROBE analytically marginalizes over continuous Cartesian translations via the polar Jacobian, yielding a distance-adaptive angular uncertainty $\sigma_\theta = \sigma_t / r$ in $\mathcal{O}(R{\cdot}S)$ time. The primary parameter $\sigma_t$ represents the expected translational uncertainty in meters, a sensor-independent physical quantity that enhances cross-sensor generalization while reducing the need for extensive per-dataset tuning. Pairwise similarity combines a Bernoulli-KL Jaccard with exponential uncertainty gating and FFT-based height cosine similarity for rotation alignment. Evaluated on four datasets spanning four diverse LiDAR types, PROBE achieves the highest accuracy among handcrafted descriptors in multi-session evaluation and competitive single-session performance relative to both handcrafted and supervised baselines. The source code and supplementary materials are available at https://sites.google.com/view/probe-pr.

阅读与讨论 → 访问原文 →

13.

arXiv (CS.LG) 2026-06-17 DOI: arXiv:2606.18175

A Convex Quasilinearization Method for Solving Nonlinear PDEs with Physics-Informed Neural Networks

作者:

Gbenga T. Awojinrin↗Abdul-Akeem Olawoyin↗Rami M. Younis↗

arXiv:2606.18175v1 Announce Type: cross Abstract: We present a numerical method for the forward solution of nonlinear partial differential equations (PDEs) in which Bellman-Kalaba quasilinearization reduces the nonlinear problem to a sequence of linear subproblems, each discretized by collocation onto a trial space that is linear in its parameters and solved by a single direct linear least-squares QR factorization. The trial space, which we term Linear-in-Learnables (LiL), comprises representations whose trainable parameters enter linearly, including random-feature extreme learning machines, spectral polynomial bases, and trigonometric expansions, each implemented as a physics-informed neural network. The method thus replaces the nonconvex gradient-based training that limits standard PINNs with a convex per-step solve. We establish local Newton-Kantorovich convergence of the outer iteration to a residual-limited neighborhood under an explicit smallness condition, with the limiting accuracy governed by the best-approximation residual of the trial space rather than by an optimization tolerance. The method, denoted LiL-Q, is assessed on seven benchmarks spanning scalar nonlinear PDEs (Bratu, viscous Burgers, Buckley-Leverett), coupled systems (plane-strain elasticity and the incompressible Navier-Stokes equations in two and three spatial dimensions), and steady-state Darcy flow with heterogeneous permeability. Across these problems, LiL-Q converges in single-digit outer iterations in most cases, even at the coarsest basis sizes and independent of the parameter count. When the exact solution lies in the span of the trial space, the method recovers it to machine precision in a single solve. On the Navier-Stokes benchmarks, it matches or exceeds published PINN solvers with up to two orders of magnitude fewer trainable parameters, without gradient-based optimization.

阅读与讨论 → 访问原文 →

14.

arXiv (CS.LG) 2026-06-16 DOI: arXiv:2606.16371

CacheMuon: Using Temporal Preconditioning To Approximate Polar Factor

作者:

Bishnu Dev↗Sushil Bohara↗Martin Tak\'a\v{c}↗Samuel Horv\'ath↗

arXiv:2606.16371v1 Announce Type: new Abstract: Muon is an optimizer that computes updates using the polar factor of the momentum matrix and has shown strong empirical performance across a range of training settings. A key component of Muon is the Newton-Schulz iteration used to compute this polar factor. Although this avoids the cost of an exact singular value decomposition, it remains expensive in practice because it is applied at every optimization step. At the same time, the momentum matrix changes smoothly over training, suggesting strong temporal correlation in the corresponding polar factors. In this paper, we exploit this structure and propose CacheMuon, a temporal preconditioning method that reuses information from previous optimization steps to approximate the polar factor at the current step. This reduces redundant orthogonalization computation across iterations. We analyze CacheMuon as an inexact Muon update, with error controlled by fresh-solver error and cache staleness. Empirically, CacheMuon provides a controllable quality-efficiency frontier: conservative thresholds closely match fresh Muon on language-model and vision training while reducing orthogonalization FLOPs, whereas more aggressive thresholds yield larger arithmetic savings at the cost of modest validation-quality degradation.

阅读与讨论 → 访问原文 →

15.

arXiv (CS.CV) 2026-06-18 DOI: arXiv:2606.18429

CAOA – Completion-Assisted Object-CAD Alignment

作者:

Hiranya Garbha Kumar↗Minhas Kamal↗Balakrishnan Prabhakaran↗

Accurately aligning CAD models to their corresponding objects in indoor RGB-D scans is a central challenge in 3D semantic reconstruction. The task requires estimating a 9-Degree-of-Freedom (DoF) pose-position, rotation, and scale along three axes-but is hindered by noisy and incomplete scans, as well as segmentation errors that cause geometric distortions. We present Completion-Assisted Object-CAD Alignment (CAOA), a method that integrates a semantically and contextually aware point cloud completion module with a symmetry-aware relative pose estimation algorithm, enabling precise alignment of CAD models to scanned objects. Existing completion methods are typically trained and evaluated on synthetic datasets, which often fail to generalize to real-world scans. To bridge this gap, we introduce a synthetic data generation strategy tailored to indoor scenes, significantly reducing the synthetic-to-real domain gap-validated through quantitative comparisons with widely used completion datasets. In addition, we release S2C-Completion, an expert-annotated dataset of over 8,500 object-CAD pairs from Scan2CAD, created for real-world indoor single-object completion and intended as a new benchmark for this task. For object-CAD alignment, we incorporate symmetry information via a symmetry-aware loss, improving robustness to symmetric ambiguities. On the Scan2CAD benchmark, CAOA achieves a 17% accuracy improvement over state-of-the-art methods.

阅读与讨论 → 访问原文 →

16.

arXiv (quant-ph) 2026-06-17 DOI: arXiv:2606.04544

Probing PbTe-Pb nanowire devices with radio-frequency reflectometry

作者:

Xin-Yi Tang↗Lin Li↗Zezhou Xia↗Jierong Huo↗Wenyu Song↗Lining Yang↗Zonglin Li↗Jiaye Xu↗Peilin Li↗Runan Shang↗Qi-Kun Xue↗Ke He↗…

arXiv:2606.04544v2 Announce Type: replace-cross Abstract: We report the implementation of radio-frequency (rf) reflectometry on selective-area-grown PbTe-Pb nanowire devices on a CdTe substrate. These nanowires are predicted to host Majorana zero modes. We demonstrate the compatibility of the rf technique, including both resistive and capacitive sensing, with these nanowires. The effect of dielectric loss from the CdTe substrate is quantitatively characterized. Furthermore, the feasibility of rf reflectometry is verified under finite magnetic fields where zero-energy modes can emerge. Our results establish the fast control of PbTe quantum devices, paving the way for their applications in topological quantum computation.

阅读与讨论 → 访问原文 →

17.

arXiv (CS.CV) 2026-06-18 DOI: arXiv:2204.14224

Investigation of Neural Network Methods for Reconstruction and Classification of Texture Images Under Conditions of Incomplete Information

作者:

Galymzhan Abdimanap↗Kairat Bostanbekov↗Abdelrahman Abdallah↗Anel Alimova↗Darkhan Kurmangaliyev↗Daniyar Nurseitov↗Tatyana Dedova↗Larissa Balakay↗Serik Nurakynov↗

The automated analysis of heterogeneous natural textures is frequently hindered by physical damage and data loss, presenting a significant challenge to computer vision. While deep learning has shown success in controlled environments, its application to complex geological materials under conditions of incomplete information remains underexplored. This study presents an integrated framework for the inpainting and classification of high-resolution core sample images. We propose an end-to-end pipeline that utilizes object detection for sample segmentation, followed by image inpainting using Generative Adversarial Networks (GANs) with Contextual Residual Aggregation (CRA) to reconstruct missing high-frequency details. Subsequently, we evaluate the performance of modern Transformer-based (Swin, ViT) and CNN architectures on the reconstructed data. Our experiments revealed a critical divergence between reconstruction quality and downstream utility: despite high structural fidelity (PSNR 28.7~dB, FID 74.01), classification accuracy plateaued at 53\%. To improve minority-class detection, we propose a confidence-based hybrid ensemble that raises MCA from 48\% to 58\%. These results highlight the limitations of current state-of-the-art generative models, which may produce visually plausible but semantically ambiguous features ("hallucinations") that confound classifiers. This work provides insights into the dependencies between image reconstruction quality and classification performance, offering a reproducible baseline for future research in non-destructive testing and material science. Given that cross-well accuracy remains in the 49–53\% range, we position the resulting system as a decision-support and screening tool for lithofacies interpretation rather than as a fully autonomous classifier. The code is available at https://github.com/GalymzhanAbdimanap/Lithology_recognition

阅读与讨论 → 访问原文 →

18.

arXiv (CS.AI) 2026-06-16 DOI: arXiv:2606.15890

UrbanWell: Benchmarking Multimodal Large Language Models for Spatio-Temporal Urban Wellbeing Analytics

作者:

Yanxin Xi↗Xiang Su↗Jie Feng↗Yu Liu↗Sasu Tarkoma↗Pan Hui↗

arXiv:2606.15890v1 Announce Type: new Abstract: Understanding urban wellbeing from multimodal data requires integrating heterogeneous spatial and temporal signals, posing significant challenges for current multimodal large language models (MLLMs). We introduce UrbanWell, a large-scale benchmark designed to systematically evaluate the spatio-temporal reasoning capabilities of MLLMs for urban wellbeing analytics through joint modeling of satellite and street view imagery. UrbanWell spans 38 cities across multiple years and includes diverse indicators covering (1) environmental conditions (CO$_2$, NO$_2$, PM${2.5}$, and Normalized Difference Vegetation Index), (2) spatial accessibility (minimum distance to supermarkets and restaurants), (3) urban form (road length, road density, and land use), (4) urban vitality (population, economic activity diversity, and land use diversity), and (5) subjective perception attributes (e.g., safety, beauty, liveliness, wealth, and quietness). All indicators are aligned at grid level to enable standardized evaluation. Beyond static prediction, UrbanWell defines temporal reasoning tasks, including future value forecasting from historical observations and temporal trend classification. We benchmark 15 state-of-the-art representative MLLMs in a zero-shot setting, providing a comprehensive comparative evaluation across spatial and temporal dimensions. Experimental results indicate that while MLLMs capture salient spatial and perceptual cues, their performance varies substantially across heterogeneous urban indicators spanning environment and subjective perception. UrbanWell serves as a unified benchmark for evaluating multimodal spatial and temporal reasoning in urban wellbeing analytics, offering a standardized testbed for systematic assessment and future research on multimodal urban intelligence. Our codes and datasets are accessible via https://github.com/axin1301/UrbanWell-Benchmark.

阅读与讨论 → 访问原文 →

19.

arXiv (CS.LG) 2026-06-11 DOI: arXiv:2606.11738

Renewable Lasso without Batch-Number Constraints: A Gradient-Enhanced Approach

作者:

Junzhuo Gao↗Ling Peng↗Xu Guo↗Heng Lian↗

arXiv:2606.11738v1 Announce Type: cross Abstract: We study online estimation for high-dimensional generalized linear models with streaming data. First, for the non-distributed setting, we propose a gradient-enhanced surrogate loss that approximates the cumulative loss using only historical summaries, which modifies and improves upon the existing renewable estimation approach for the same model in the high-dimensional setting, and removes the batch-number constraint in previous studies. We then extend the method to distributed streaming data under the master-client architecture, where batches are partitioned across sites and only summaries (gradient vectors) are exchanged. Instead of directing applying the popular method of Jordan et al. (2019) to the surrogate quadratic loss, our adjusted approach does not require the clients to compute the full surrogate loss. We derive non-asymptotic error bounds under the high-dimensional scaling, without the stringent constraint on the number of batches in the previous studies. Simulation results under linear and logistic models, together with a real-data application, show improved accuracy over existing renewable estimators.

阅读与讨论 → 访问原文 →

20.

arXiv (CS.AI) 2026-06-11 DOI: arXiv:2605.10907

Engineering Robustness into Personal Agents with the AI Workflow Store

作者:

Roxana Geambasu↗Mariana Raykova↗Pierre Tholoniat↗Trishita Tiwari↗Lillian Tsai↗Wen Zhang↗

arXiv:2605.10907v3 Announce Type: replace-cross Abstract: The dominant paradigm for AI agents is an "on-the-fly" loop in which agents synthesize plans and execute actions within seconds or minutes in response to user prompts. We argue that this paradigm short-circuits disciplined software engineering (SE) processes – iterative design, rigorous testing, adversarial evaluation, staged deployment, and more – that have delivered the (relatively) reliable and secure systems we use today. By focusing on rapid, real-time synthesis, are AI agents effectively delivering users improvised prototypes rather than systems fit for high-stakes scenarios in which users may unwittingly apply them? This paper argues for the need to integrate rigorous SE processes into the agentic loop to produce production-grade, hardened, and deterministically-constrained agent *workflows* that substantially outperform the potentially brittle and vulnerable results of on-the-fly synthesis. Doing so may require extra compute and time, and if so, we must amortize the cost of rigor through reuse across a broad user community. We envision an *AI Workflow Store* that consists of hardened and reusable workflows that agents can invoke with far greater reliability and security than improvised tool chains. We outline the research challenges of this vision, which stem from a broader flexibility-robustness tension that we argue requires moving beyond the ``on-the-fly'' paradigm to navigate effectively.

阅读与讨论 → 访问原文 →

21.

arXiv (CS.CV) 2026-06-19 DOI: arXiv:2606.20110

FrozenDrive: Zero-Shot Text-Guided Driving Scene Generation and Data Augmentation with Parameter-Free Frozen Diffusion Model

作者:

Yuhwan Jeong↗Hyeonseong Kim↗Daehyun We↗Seonkyu Song↗Jinnyeong Yang↗Hyun-Kurl Jang↗Youngho Yoon↗Kuk-Jin Yoon↗

Synthetic data for autonomous driving is surging, powered by diffusion models that promise scalable scene generation. Yet key obstacles remain, as enforcing multi-view and temporal consistency often relies on backbone fine-tuning or added layers, which erodes pre-trained knowledge and weakens text alignment. Models also stay close to the training distribution, struggling under adverse weather and unseen configurations, and fidelity favors frequent over rare classes. We address these gaps with FrozenDrive, a controllable generative framework that preserves a pretrained diffusion models knowledge while achieving strong consistency. FrozenDrive conditions on rich driving-stack signals and text prompts, and introduces knowledge-preserving spatio-temporal attention to impose cross-view alignment and temporal coherence in a single pass within a parameter-free frozen diffusion backbone. An additional object-focused constraint improves per-object fidelity for rare categories. Without any weather- or scene-specific fine-tuning, our model synthesizes globally coherent multi-view driving scenes from text, particularly under adverse and rare conditions, and surpasses prior baselines. On nuScenes, FrozenDrive augmented data significantly improves AD models performance, especially at night and in rain, demonstrating stronger robustness when trained with our scenario-targeted data.

阅读与讨论 → 访问原文 →

22.

arXiv (CS.AI) 2026-06-12 DOI: arXiv:2606.12430

Will AI Agents Free Us From Meaningless Work? A Human-Centered Analysis

作者:

Davide Ghia↗Jaspreet Ranjit↗Tania Cerquitelli↗Daniele Quercia↗

arXiv:2606.12430v1 Announce Type: cross Abstract: Some claim that AI agents will free workers from the boring parts of their jobs, yet little is known about how workers themselves identify which tasks should be automated. Prior research focuses on occupations, overlooking that workers experience varying levels of meaning across tasks within the same role. We address this gap with a task-level analysis grounded in Graeber's theory of bullshit jobs. Using ratings from 202 workers on 171 workplace tasks, we (1) validate a five-item scale of perceived bullshitness, (2) show that perceived bullshitness strongly predicts desire for AI delegation, and (3) find that such tasks are also seen as requiring less human oversight. Together, these findings suggest that tasks perceived as bullshit are natural candidates for AI delegation, aligning worker preferences with perceived feasibility.

阅读与讨论 → 访问原文 →

23.

arXiv (CS.CV) 2026-06-16 DOI: arXiv:2606.15037

ReportQA: QA-Based Radiology Report Evaluation

作者:

Yiming Shi↗Shaoshuai Yang↗Xi Chen↗Haolin Li↗Hengyu Zhang↗Che Jiang↗Kaiwen Wang↗Xun Zhu↗Dong Xie↗Fei Wang↗Dejing Dou↗Miao Li↗…

Radiology report evaluation is essential for advancing automated report generation. Natural language generation metrics have limited clinical relevance. Clinical efficacy (CE) metrics evaluate important medical findings, but focus mainly on presence and cover only a limited set of entities. Due to heavy reliance on manual annotations, it is difficult for CE metrics to extend clinical entities or attributes. In clinical practice, radiology reports serve as a medium for information transfer. Clinicians use them to perform downstream diagnostic tasks without directly inspecting images. Based on this insight, we propose ReportQA, a clinical-related and flexible radiology report evaluation framework, supporting detailed quantitative analysis of radiology report generation systems. We first collect datasets covering multiple imaging modalities and anatomical regions. We then construct knowledge trees of clinical entities and attributes with radiologist guidance, and use large language models (LLMs) to extract structured information from raw reports. Next, we generate QA pairs from predefined templates and apply quality control through self-filtering and report-based filtering. During evaluation, the report is treated as context, and an LLM acts as a judge model to answer the QA pairs. Based on the resulting QA accuracy, we introduce QAScore metric. Compared with existing metrics, QAScore shows better alignment with radiologist judgments. Experiments on multiple state-of-the-art vision-language models reveal that current report-based inference paradigms struggle to learn fine-grained clinical representations and exhibit strong negative prior biases. In contrast, question-driven inference provides a more effective alternative. For reproducibility and extensibility, we release the knowledge trees, structured reports, and QA pairs, along with the pipeline code for QA construction and evaluation.

阅读与讨论 → 访问原文 →

24.

arXiv (CS.AI) 2026-06-15 DOI: arXiv:2606.13753

The Weight Norm Sets the Grokking Timescale: A Causal Delay Law

作者:

Truong Xuan Khanh↗Doan Hoang Viet↗Luu Duc Trung↗Phan Thanh Duc↗

arXiv:2606.13753v1 Announce Type: cross Abstract: Grokking is the delayed onset of generalization in neural networks, arising long after they fit the training data. Whether the weight norm causes this delay is disputed: some studies report a critical norm at the transition, others observe grokking with no fixed norm at all. We settle this by intervening on the norm during training rather than only observing it. Under free training with weight decay, networks grok when the weight norm reaches a value Wc that varies little across seeds and learning rates (CV 1 to 2 percent) and grows with the modular base as a power law. When we instead clamp the norm to a fixed multiple rho of Wc and hold it there, the network still groks, but the delay follows T_grok proportional to exp(alpha rho). One exponent, alpha near 7.5, fits this delay across four moduli (R^2 = 0.996). Over the swept ranges the held norm moves the delay by about 19x and the learning rate by only about 2x, and holding the norm above Wc slows grokking rather than preventing it. A final LayerNorm removes the dependence by decoupling weight scale from the network function; without it the exponential law returns. This pinned-norm delay is the exponential counterpart to the logarithmic delay predicted for a freely contracting norm.

阅读与讨论 → 访问原文 →

25.

arXiv (CS.LG) 2026-06-12 DOI: arXiv:2606.12486

An Empirical Study on Predictive Maintenance for Component X in Heavy-Duty Scania Trucks

作者:

Valeriu Dimidov↗Sasan Jafarnejad↗Rapha\"el Frank↗

arXiv:2606.12486v1 Announce Type: new Abstract: Condition-based Predictive Maintenance (PdM) for truck fleets has gained momentum in recent years. This maintenance strategy aims to minimize unplanned downtimes and reduce costs by monitoring the health status of vehicles and taking proactive action based on their condition. However, the implementation of condition-based PdM systems is challenging due to the large volume of data generated by the trucks, the inherent complexity of detecting failures through sensor data and the difficulties in finding cost-effective trade-offs in the solution's implementation. In this paper, we define and validate a condition-based PdM methodology built on the assumption that the wear-and-tear state of the monitored component can be represented as a monotonically non-decreasing time series. It involves selecting only the most recent observations from the time series and transforming them into a tabular format for classification using machine learning (ML) models designed for tabular data. Our results indicate that the proposed methodology reduces costs on the Scania Component X dataset compared to current state-of-the-art (SOTA) approaches, while also simplifying the modeling process through AutoML.

阅读与讨论 → 访问原文 →