Academic Intelligence · Curated Daily

探索全球前沿学术脉络

AcademicHub 汇聚顶级期刊与预印本平台的实时文献。定制您的专属科研雷达,利用大语言模型自动生成交叉领域文献分析简报。

02.
arXiv (CS.LG) 2026-06-18

Learning Augmented Exact Exponential Algorithms

arXiv:2606.18807v1 Announce Type: cross Abstract: The field of learning-augmented algorithms has demonstrated that machine-learned predictions can bypass worst-case lower bounds across a wide range of problems. So far, however, the focus has been almost exclusively on polynomial-time algorithms, where predictions improve competitive ratios, approximation guarantees, or running times. In this paper, we raise the question of whether predictions can push the frontier of exact exponential-time algorithms for NP-hard problems. We answer this question affirmatively by proposing a general approach that augments an entire family of state-of-the-art exact algorithms for a variety of subset selection problems. We show that a noisy predictor that is only marginally better than random guessing suffices to provably reduce the search space, and that the resulting runtime speedup scales smoothly with the prediction quality. Importantly, our algorithms require only pairwise independence of predictions or, alternatively, do not require the knowledge of the predictor's accuracy - both strictly weaker and more realistic settings than typically assumed.

03.
arXiv (CS.AI) 2026-06-12

The Containment Gap: How Deployed Agentic AI Frameworks Fail Public-Facing Safety Requirements

arXiv:2606.12797v1 Announce Type: new Abstract: Agentic large language model systems that autonomously invoke tools, maintain persistent memory, and execute multi-step plans are increasingly deployed in public-facing domains, including government services, healthcare triage, and financial advising. We ask whether the frameworks used to build these systems provide architectural-level structural safety guarantees. Applying six containment principles derived from a compositional model of agentic architectures, we audit three dominant frameworks (LangChain, AutoGPT, and OpenAI Agents SDK) and find no native compliance in any of them. Memory integrity, a defense against one of the most prevalent vulnerability classes, is not observed in any of the three evaluated frameworks. We validate these findings empirically: in a simulated government benefits agent built on LangChain, a single memory-poisoning write induces persistent targeted corruption across all tested seeds and backends, increasing the wrongful denial rate for targeted applicants to 88.9%. Under a complex five-factor policy, the same attack preserves aggregate accuracy while increasing targeted wrongful denials by 3.5x, rendering the corruption difficult to detect through standard monitoring. We then introduce two lightweight containment mechanisms: a memory integrity validator and a policy gate, which eliminate both attack vectors with sub-millisecond overhead (

04.
arXiv (CS.CL) 2026-06-16

Enhancing LLM Safety Through a Theoretical Minimax Game Lens

The rapid advancement of large language models (LLMs) necessitates effective mechanisms to ensure their responsible deployment by accurately distinguishing unsafe content from benign content. While substantial safety datasets are available in English, multilingual safety modeling remains underexplored due to limited open-source safety datasets in other languages. Even within English datasets, safe yet sensitive corner-case content is scarce, leading to shortcut learning by models and non-trivial false-positive rates. To mitigate these issues, we introduce a novel minimax reinforcement learning (RL) framework wherein a data generator and a classifier model co-evolve, facilitating the production of high-quality synthetic multilingual safety data. We theoretically formalize this interaction as a minimax game and rigorously demonstrate convergence to a Nash equilibrium. Empirical evaluations confirm that our synthetic data generation method significantly enhances the classifier model performance, enabling a substantially smaller model to surpass the state-of-the-art by nearly 10% on English benchmarks while achieving 4.5x faster inference speed. These results establish a scalable and efficient methodology for synthetic data generation, advancing the development of safer and more robust multilingual LLM deployments.

05.
arXiv (CS.LG) 2026-06-15

Machine Learning for Biomedical Raman Spectroscopy: From Spectral Acquisition to Clinical Translation

arXiv:2606.14169v1 Announce Type: new Abstract: Raman spectroscopy provides label-free, chemically specific characterization of biological systems and has become an important tool for cancer diagnosis, molecular subtyping, microbiological identification, and intraoperative decision support. Biomedical Raman spectra are, however, high-dimensional, noisy, and affected by fluorescence background, acquisition variability, and biological heterogeneity, making robust computational analysis essential. This review examines the role of machine learning across the biomedical Raman spectroscopy pipeline, from preprocessing and signal correction to unsupervised structure discovery, supervised diagnosis and molecular stratification, representation and transfer learning, explainability, biomarker discovery, and multimodal integration with imaging, pathology, and molecular profiling. Emphasis is placed on the use of machine learning not only for diagnostic classification, but also for biologically interpretable and clinically actionable analysis. We also discuss the main barriers to clinical translation, including limited dataset sizes, inter-instrument variability, inconsistent preprocessing, insufficient external validation, reproducibility concerns, and limited sharing of software, data, and metadata. We argue that progress will require methodological advances together with standardization, robust validation, explainability, and deployment-ready analytical frameworks. By integrating methodological, biomedical, and translational perspectives, this review outlines key directions for developing reliable and clinically deployable Raman-AI systems.

06.
arXiv (CS.LG) 2026-06-11

Mechanical Field Networks: Structured Neural Dynamics for Multivariate Systems

作者:

arXiv:2606.11251v1 Announce Type: new Abstract: Many multivariate dynamical systems are observed only through trajectories, leaving the mechanisms governing their joint dynamics hidden. Existing approaches can impose interpretable dynamics or learn flexible state transitions, yet the resulting interaction structure is typically either specified in advance or left implicit within the learned dynamics. We introduce MF-Net, a recurrent dynamical model that represents all variables in a shared field state and updates this state through a learned relation law. Each variable carries a field component, and these components evolve jointly through a learnable mechanical transition. Here, mechanical refers to the relation-to-motion organization of the transition, where learned relations shape state-dependent flows, field responses, and motion tendencies that move the field state forward. The resulting structure is part of the rollout itself: learned relations influence how the field moves, and the same internal quantities support both forecasting and structural readout. Across known-law interaction systems, chaotic benchmarks, real neural recordings, and ecological time series, MF-Net achieves competitive short- and medium-horizon forecasting while retaining inspectable structural readout. On the 40-dimensional Lorenz–96 testbed, MF-Net achieves an eight-step $R^2$ of $0.798\pm0.018$; across five seeds, its learned relation matrix recovers the local coupling support with a local/nonlocal strength ratio of $19.80\pm1.00$ and Precision@$K$ of $1.000\pm0.000$. MF-Net provides a structure-readable dynamical modeling framework in which learned relations are trained through forward evolution and, on real data, interpreted as functional predictive couplings under appropriate observational limits.

07.
arXiv (CS.AI) 2026-06-16

RoboPIN: Grounded Embodied Reasoning via Pinned Chain-of-Thought

arXiv:2606.15753v1 Announce Type: new Abstract: Embodied reasoning requires models to perceive task-relevant objects and spaces in physical environments and maintain consistent visual grounding throughout multi-step reasoning. However, current vision-language models rely on text-only or coordinate-augmented chain-of-thought, where entity references remain implicit and ambiguous. This may cause the reasoning process to decouple from visual evidence, entity references to drift across steps, and a causal disconnection between the reasoning trajectory and the final answer, with these problems further amplified in multi-view scenarios due to cross-view appearance changes. To address these issues, we propose Pinned Chain-of-Thought (\pincot{}), a structured reasoning paradigm that pins every reasoning step to visual evidence. \pincot{} introduces the concept of \reasoninganchor{}, which binds each task-relevant entity to a structured visual anchor with entity name, unique identity, view index, and spatial grounding, enabling consistent entity tracking across reasoning steps and views. We build a fully automated data generation pipeline to construct \dataset{}, a high-quality \pincot{}-formatted reasoning dataset. We then train \method{} through three-stage post-training that progressively injects embodied knowledge, structured reasoning ability, and process-supervised alignment, with rewards that directly constrain both anchor localization and identity consistency during reasoning. On 14 benchmarks covering embodied spatial reasoning, multi-view reasoning, and pointing, \method{} with only 4B parameters consistently outperforms 7B level open-source embodied models, achieving a 12\% average improvement over the strongest 7B baseline, Mimo-Embodied. Further analysis shows that \pincot{} improves grounding accuracy and cross-step identity consistency, validating the effectiveness of process supervision.

08.
bioRxiv (Bioinfo) 2026-06-19

Nickel-Driven Dynamics of Urease in Sporosarcina pasteurii: Integrated Computational and Experimental Insights

Urease is a nickel-dependent enzyme that plays an important role in urea hydrolysis and in a process named as microbial-induced calcium carbonate precipitation (MICP), which is widely used in sustainable environmental biotechnology. Despite its ecological importance, urease powers Biogrout (biocementation), a promising green technology for soil stabilization and infrastructure repair. Yet, the relationship between nickel availability, enzyme activation, and bacterial fitness remains poorly understood. In this study, we reveal a striking dual effect of nickel on Sporosarcina pasteurii: while high Ni2+ concentrations strongly inhibit growth (IC50 {approx} 637.7 {micro}M), they simultaneously boost specific urease activity up to six-fold. This uncoupling between biomass and enzymatic efficiency highlights a previously overlooked adaptive strategy under metal stress. Using structural bioinformatics and molecular docking, we show that Ure1–the catalytic subunit–exhibits the strongest nickel affinity (-4.3 kcal{middle dot}mol-1), supported by highly conserved active-site residues, whereas accessory proteins UreE and UreG display moderate and weak binding, consistent with their roles in metal delivery and GTP-dependent maturation. In addition, microscopic observations confirmed that calcium carbonate precipitation was most pronounced at intermediate nickel concentrations (approximately 400-1000 {micro}M), whereas higher concentrations ([≥]1000-1300 {micro}M) led to reduced mineral formation due to loss viable cells. Taken together, these results indicates that nickel availability controls both urease activation and bacterial fitness, and that an optimal balance is required to maximize biomenerilization efficiency in environmental applications, particularly in biocementation technology.

09.
arXiv (CS.LG) 2026-06-16

How Controlling the Variance can Improve Training Stability of Sparsely Activated DNNs and CNNs

arXiv:2602.05779v2 Announce Type: replace Abstract: The Edge-of-Chaos (EoC) theory developed for the random initialization of deep networks allows more efficient training by both preserving information in the initial outputs of the network and minimising exploding or vanishing gradients through characterisation of the intermediate layers as Gaussian processes. This EoC theory provides formulae for the choice of the initialisation distribution variances of the weights and biases. For activations which are approximately linear around the origin, the EoC theory typically encourages the Gaussian process variance to converge towards zero with increasing depth. Here we consider the less studied setting of highly sparsity inducing activations where a large region of values near the origin are set to zero. In this setting we prove a new phenomenon whereby initialisations leading to larger fixed Gaussian processes are beneficial to training stability. This theory informs a new, yet simple, initialisation strategy that allows training DNNs and CNNs with as large as 90\% sparsity in the hidden layers.

10.
arXiv (CS.AI) 2026-06-16

Adaptive Memory Crystallization for Autonomous AI Agent Learning in Dynamic Environments

arXiv:2604.13085v2 Announce Type: replace-cross Abstract: Autonomous AI agents operating in dynamic environments face a persistent challenge: acquiring new capabilities without erasing prior knowledge. We present Adaptive Memory Crystallization (AMC), a memory architecture for progressive experience consolidation in continual reinforcement learning. AMC is conceptually inspired by the qualitative structure of synaptic tagging and capture (STC) theory, the idea that memories transition through discrete stability phases, but makes no claim to model the underlying molecular or synaptic mechanisms. AMC models memory as a continuous crystallization process in which experiences migrate from plastic to stable states according to a multi-objective utility signal. The framework introduces a three-phase memory hierarchy (Liquid–Glass–Crystal) governed by an Itô stochastic differential equation (SDE) whose population-level behavior is captured by an explicit Fokker–Planck equation admitting a closed-form Beta stationary distribution. We provide proofs of: (i) well-posedness and global convergence of the crystallization SDE to a unique Beta stationary distribution; (ii) exponential convergence of individual crystallization states to their fixed points, with explicit rates and variance bounds; and (iii) end-to-end Q-learning error bounds and matching memory-capacity lower bounds that link SDE parameters directly to agent performance. Empirical evaluation on Meta-World MT50, Atari 20-game sequential learning, and MuJoCo continual locomotion consistently shows improvements in forward transfer (+34–43\% over the strongest baseline), reductions in catastrophic forgetting (67–80\%), and a 62\% decrease in memory footprint.

11.
arXiv (CS.CV) 2026-06-15

HiLo-Token: Input-Adaptive High-Low Frequency Token Compression for Efficient Image Editing

Creative image editing tools, such as Photoshop's Remove or Generative Fill buttons, are central to everyday customer use and account for a major share of traffic in Photoshop and Lightroom. However, current generative AI models face significant latency challenges, which become even more pronounced when transitioning from convolution-based U-Nets to Diffusion Transformers (DiTs). In our evaluation on hundreds of representative image editing samples spanning a wide range of mask ratios, the DiT module alone accounts for an average of 73% of the total model latency, even after being distilled from 50 timesteps down to 8 timesteps. To tackle this challenge, we propose $HiLo-Token$, an input-adaptive token compression framework that allocates more token budget to high-frequency, rich-context regions while assigning fewer tokens to low-frequency areas. Specifically, for the editing region specified by the user mask, we retain all tokens within a dilated mask to preserve strong locality and contextual relevance. Outside the editing region, we introduce a simple yet effective high-frequency token selection strategy based on spatial frequency to capture important local details, while using tokens from a 16x downsampled image to represent low-frequency components and preserve the blurry but global structure. Extensive experiments on production-level evaluation data validate the effectiveness of the proposed method, achieving 3.13x, 2.59x, and 1.67x DiT speedups on A100-80GB for image editing tasks across small, medium, and large mask ratio categories with average ratios of 6.38%, 15.92%, and 35.36%, respectively, without any regression in generation quality.

12.
arXiv (CS.CL) 2026-06-11

Small Experiments, Cheaper Decisions: A Case Study in Staged Promotion for Micro-Pretraining

Short pretraining runs can reduce experimental cost, but they can also over-promote configurations that only look strong at tiny budgets. We study an auditable staged-promotion protocol for a fixed micro-pretraining runner on two heterogeneous host blocks: Windows A100 and Linux L40S. Starting from twelve prior-screened configurations, we use staged budgets of 2 minutes, 5 minutes, 10 minutes, 60 minutes, and 12 hours, with frozen promotion rules before expensive continuations. The early screens are intentionally treated as unstable: the 5- and 10-minute rankings are host-sensitive, and the eventual 12-hour top-ranked condition is not the mean-best condition at the replicated 10-minute gate. Because seed ranges differ across stages, these changes are operational promotion evidence, not within-seed curves. A replicated 60-minute gate keeps the Staged Factorial Screening bridge reference in the promoted set, where it ranks first in all four 60-minute host-seed cells. In the final 12-hour confirmation package, the bridge condition ranks first in all four host-seed cells across two seeds; the greedy comparator does not meet the frozen 0.010 val_bpb near-equivalence rule; and the cheaper d8/ar48 (depth-8, aspect-48) sentinel does not meet the frozen 0.020 mean-gap rule. The executed 12-hour branch spends 144 GPU-hours, and the full staged protocol records 169.2 training GPU-hours including screening stages. Continuing all four 60-minute candidates would spend 192 GPU-hours, while continuing all nine replicated 10-minute candidates would spend 432 GPU-hours. The latter numbers are accounting counterfactuals for unrun continuations, not evidence that skipped candidates could not have overtaken the reference. The result is a bounded cost-allocation finding, not a claim of global optimality, capacity-normalized superiority, or superiority over adaptive hyperparameter optimization methods.

13.
arXiv (quant-ph) 2026-06-16

Enhanced Sensitivity near a Quantum Exceptional Point in the Absence of Engineered Dissipation

arXiv:2606.16060v1 Announce Type: new Abstract: Non-Hermitian systems exhibit phenomena absent from Hermitian systems, including exceptional points (EPs), at which two or more eigenvectors coalesce. Conventional implementations rely on gain and loss, which strongly limit quantum coherence. Here, following a proposal by Wang and Clerk (PRA 2019), we realize a closed four-mode quantum system that emulates the dynamics of a PT dimer - two coupled resonators with balanced gain and loss - without engineered dissipation. The four modes are implemented as harmonics of a superconducting coplanar-waveguide resonator, with parametric couplings engineered using a current-pumped SNAIL. We use this device as a sensor for small variations in the PT dimer coupling strength. From signal-to-noise-ratio measurements, we observe enhanced sensitivity near the EP in a non-quantum-limited regime.

14.
arXiv (CS.LG) 2026-06-17

MiniFool – Physics-Constraint-Aware Minimizer-Based Adversarial Attacks in Deep Neural Networks

arXiv:2511.01352v2 Announce Type: replace Abstract: In this paper, we present a new algorithm, MiniFool, that implements physics-inspired adversarial attacks for testing neural network-based classification tasks in particle and astroparticle physics. While we initially developed the algorithm for the search for astrophysical tau neutrinos with the IceCube Neutrino Observatory, we apply it to further data from other science domains, thus demonstrating its general applicability. Here, we apply the algorithm to the well-known MNIST data set and furthermore, to Open Data data from the CMS experiment at the Large Hadron Collider. The algorithm is based on minimizing a cost function that combines a $\chi^2$ based test-statistic with the deviation from the desired target score. The test statistic quantifies the probability of the perturbations applied to the data based on the experimental uncertainties. For our studied use cases, we find that the likelihood of a flipped classification differs for both the initially correctly and incorrectly classified events. When testing changes of the classifications as a function of an attack parameter that scales the experimental uncertainties, the robustness of the network decision can be quantified. Furthermore, this allows testing the robustness of the classification of unlabeled experimental data.

15.
arXiv (CS.LG) 2026-06-17

Robust Local Polynomial Regression with Similarity Kernels

arXiv:2501.10729v3 Announce Type: replace-cross Abstract: Local Polynomial Regression (LPR) is a widely used nonparametric method for modeling complex relationships due to its flexibility and simplicity. It estimates a regression function by fitting low-degree polynomials to localized subsets of the data, weighted by proximity. However, traditional LPR is sensitive to outliers and high-leverage points, which can significantly affect estimation accuracy. This paper revisits the kernel function used to compute regression weights and proposes a novel framework that incorporates both predictor and response variables in the weighting mechanism. The focus of this work is a conditional density kernel that robustly estimates weights by mitigating the influence of outliers through localized density estimation. The proposed method is implemented in Python and is publicly available at https://github.com/yaniv-shulman/rsklpr. The population analysis quantifies the bias induced by density-based robust weighting, and the reported experiments show lower empirical bias than iterative robust LOWESS while remaining competitive with standard LOWESS. This advancement provides a promising extension to traditional LPR, opening new possibilities for robust regression applications.

16.
arXiv (CS.CL) 2026-06-12

LAUKIN: A Multi-jurisdictional Common Law Contract Dataset

Multinational companies increasingly require cross-jurisdictional contract review, yet existing legal NLP datasets are largely restricted to a single jurisdiction. We introduce LAUKIN (Legal equivalence dataset of Australia, UK, and INdia), a dataset of clause pairs (AU-UK, UK-IN, IN-AU) labelled for boolean legal equivalence. We develop a novel multi-stage retrieval and reranking pipeline to construct the initial clause pair mapping, with a subset of clause pairs subsequently annotated by legal experts as Equivalent or Not Equivalent. The dataset comprises 14,727 clause pairs from 204 contracts across 8 agreement types, of which 3,000 are manually labelled: 900 train, 600 dev, and 1,500 test. We evaluate 12 models across 4 techniques, achieving a best macro-F1 of 65.11%, establishing LAUKIN as a challenging benchmark. Results reveal that, despite shared legal heritage, drafting conventions diverge significantly across jurisdictions, making cross-jurisdictional equivalence classification non-trivial. LAUKIN also includes 11,727 unlabelled training pairs to support future semi-supervised learning research in legal NLP.

17.
arXiv (CS.LG) 2026-06-12

Allocating Human Oversight in AI-Enabled Analytics

arXiv:2604.12497v2 Announce Type: replace Abstract: Organizations increasingly deploy AI as a low-cost prediction layer in customer-facing decision processes, including demand sensing, service-quality monitoring, product testing, and market research, but AI-generated signals are unevenly reliable across tasks, products, and customer segments. Firms therefore still need scarce human validation (labels, audits, survey responses, or follow-up measurements) to anchor AI outputs to ground truth. Because human ground truth is itself noisy, varying across labelers and even across repeated judgments, the firm must collect and average several human labels per task, which makes human validation costly. We study how to allocate a limited human-validation budget across many AI-assisted tasks when reliability is heterogeneous and unknown before deployment. We cast this within tuned prediction-powered inference. Each human label both sharpens the AI-assisted estimate and reveals the task's rectification difficulty, the variance that remains after the AI prediction is optimally used as a control variate. If difficulties were known, the optimal allocation would follow a Neyman square-root rule; because they are unknown, we propose a policy based on upper confidence bounds that learns them online and steers validation toward tasks where AI is least reliable. We prove that the policy's terminal efficiency loss relative to the oracle allocation vanishes as the budget grows. In synthetic experiments and a real digital-twin survey with 68 tasks and over 2000 respondents, it closes most of the gap to the oracle when reliability is heterogeneous, outperforming uniform and epsilon-greedy allocation; on the survey data it also outperforms explore-then-commit pilot designs and cuts uniform's 10–12% gap to 2–6%. The value of AI depends not only on model accuracy but also on the operational policy that targets human oversight where AI errors matter most.

18.
arXiv (CS.LG) 2026-06-12

Learning on a Razor's Edge: Identifiability and Singularity of Polynomial Neural Networks

arXiv:2505.11846v3 Announce Type: replace Abstract: We study function spaces parametrized by neural networks, referred to as neuromanifolds. Specifically, we focus on deep Multi-Layer Perceptrons (MLPs) and Convolutional Neural Networks (CNNs) with an activation function that is a sufficiently generic polynomial. First, we address the identifiability problem, showing that, for almost all functions in the neuromanifold of an MLP, there exist only finitely many parameter choices yielding that function. For CNNs, the parametrization is generically one-to-one. As a consequence, we compute the dimension of the neuromanifold. Second, we describe singular points of neuromanifolds. We characterize singularities completely for CNNs, and partially for MLPs. In both cases, they arise from sparse subnetworks. For MLPs, we prove that these singularities often correspond to critical points of the mean-squared error loss, which does not hold for CNNs. This provides a geometric explanation of the sparsity bias of MLPs. All of our results leverage tools from algebraic geometry.

19.
arXiv (CS.CL) 2026-06-16

Learning When to Sample: Confidence-Aware Selective Sampling for Efficient Chain-of-Thought Reasoning

Large language models (LLMs) can achieve strong reasoning performance through chain-of-thought (CoT) reasoning, yet they often generate unnecessarily long reasoning paths that incur high inference cost. Self-consistency-based approaches push accuracy higher still, but they require sampling and aggregating multiple reasoning trajectories, leading to substantial computational overhead. In this paper, we introduce a confidence-aware selective sampling framework that, at inference time, analyzes a single reasoning trajectory to adaptively determine whether to rely on that trajectory alone or trigger multi-path sampling. The framework uses trajectory-level numeric features and sentence-level linguistic features extracted from reasoning states to guide selective multi-path reasoning. We train it on MedQA and evaluate it in-domain on MedQA and under calibration-only transfer on MathQA, MedMCQA, and MMLU, without further fine-tuning. Experimental results show that the proposed framework maintains comparable performance to full and efficient multi-path reasoning baselines, with accuracy changes of $-0.41 \pm 0.58$ and $-0.31 \pm 0.58$ percentage points, respectively, while reducing token usage by $71.7 \pm 5.0%$ and $36.6 \pm 9.1%$. These findings demonstrate that reasoning trajectories contain rich signals for uncertainty estimation, enabling a simple, transferable mechanism to balance accuracy and efficiency in LLM reasoning.

20.
arXiv (CS.AI) 2026-06-17

Trustworthy Self-Composable Big-Data-as-a-Service: An LLM-Orchestrated Multi-Agent Framework for Automated Data Engineering, AutoML, MLOps Deployment, and Drift-Aware Lifecycle Optimization

arXiv:2606.17915v1 Announce Type: cross Abstract: Big-Data-as-a-Service (BDaaS) platforms require re liable automation across data ingestion, cleaning, feature engi neering, model development, deployment, and post-deployment monitoring. However, existing LLM-based data science agents and AutoML systems mainly focus on isolated workflow stages, leaving limited support for lifecycle-level orchestration, artifact governance, human oversight, and drift-aware adaptation. This paper proposes a trustworthy self-composable BDaaS frame work based on LLM-orchestrated multi-agent collaboration. The proposed architecture decomposes the BDaaS lifecycle into specialized agents for data ingestion, data cleaning, feature engineering, AutoML training, model evaluation, MLOps de ployment, monitoring, and drift detection. A central LLM or chestration layer coordinates agent execution, validates interme diate outputs, manages workflow context, and enables dynamic workflow composition. The framework also incorporates shared artifact governance, reproducibility support, human-in-the-loop checkpoints, and drift-aware feedback loops. A prototype-based evaluation is conducted using controlled tabular benchmark datasets with missing values, categorical variables, outliers, class imbalance, and simulated covariate drift. Compared with manual ML, AutoML-only, and single-agent LLM baselines, the pro posed multi-agent BDaaS pipeline achieves competitive predictive performance while improving lifecycle-level reliability, including workflow completion, artifact traceability, deployment readiness, reproducibility, and drift recovery. The results suggest that LLM-orchestrated multi-agent systems can extend conventional AutoML toward trustworthy, adaptive, and production-oriented BDaaS lifecycle automation.

21.
arXiv (CS.LG) 2026-06-19

Judging to Improve: A De-biased VLM-as-3D-Judge Protocol for Single-Image 3D Generation

arXiv:2606.20364v1 Announce Type: new Abstract: A companion study established a de-biased, cross-model VLM-as-3D-judge that reliably ranks single-image-to-3D mesh quality where cheap geometry and CLIP proxies fall short. This paper asks: can that judge's preferences specialize a strong open generator, TRELLIS, on one asset class (furniture), cheaply and without human labels? Taking the judge from ranking to optimization is where the work lives. Pushing a VLM judge into the training and evaluation loop exposes failure modes ranking never triggered, so our contribution is an optimization-grade hardening of the judge: a training judge (Qwen2.5-VL-7B) held distinct from an evaluation judge (InternVL3-8B) to break circularity; position-bias correction; and fixes for three failure modes (image overload, geometry-hiding splat renders, and reference-free judging that rewards clean-but-wrong outputs), with calibration evidence (clear-gap win-rate 0.83-1.0; base-vs-base ~0.5). Using this protocol as an independent evaluator, and working only from public models and data with lightweight parameter-efficient adaptation, we find our methods match the strong base rather than exceed it. Independent base samples carry essentially no learnable preference (0.94 order-flip rate), so signal must be engineered by quality-contrastive construction. Across six adaptation methods, two input regimes, and a severity sweep, the most targeted - conditioner repair under severe degradation - reaches parity (0.50) with the base, while no method clears the >=65% win-rate target. The result is mechanistic: clean inputs saturate the judge, flow-DIT fine-tuning washes out through the sampler, and conditioning repair is the locus that moves geometry. Win-rates are directional at n=8 objects. Matching a strong public-data base with cheap adaptation is itself informative: exceeding it needs more than lightweight PEFT on public data, and the judge protocol is reusable.

22.
arXiv (CS.CL) 2026-06-16

HK-LegiCoST: Leveraging Non-Verbatim Transcripts for Speech Translation

We introduce HK-LegiCoST, a new three-way parallel corpus of Cantonese-English translations, containing 600+ hours of Cantonese audio, its standard traditional Chinese transcript, and English translation, segmented and aligned at the sentence level. We describe the notable challenges in corpus preparation: segmentation, alignment of long audio recordings, and sentence-level alignment with non-verbatim transcripts. Such transcripts make the corpus suitable for speech translation research when there are significant differences between the spoken and written forms of the source language. Due to its large size, we are able to demonstrate competitive speech translation baselines on HK-LegiCoST and extend them to promising cross-corpus results on the FLEURS Cantonese subset. These results deliver insights into speech recognition and translation research in languages for which non-verbatim or ``noisy'' transcription is common due to various factors, including vernacular and dialectal speech.

23.
arXiv (CS.AI) 2026-06-15

Output Type Before Quality: A Standards-Derived XAI Admissibility Rubric for Autonomous-Driving Safety

arXiv:2606.05461v2 Announce Type: replace Abstract: Safety standards for ML-based autonomous driving specify the kind of evidence an assurance case must contain (directed cause-and-effect chains, quantified interventional effects, named root-cause variables), yet the XAI literature is organised by output type and technique family (saliency maps, feature attribution, counterfactuals, causal graphs, language traces). SHAP, the most-recommended ADS XAI method, returns a ranked feature list that no implementation effort can convert into a directed chain (Fig.1). We name this mismatch the evidence-type gap. From AMLAS, ISO 26262, ISO21448, ISO/PAS 8800 we derive 19 testable evidentiary criteria across 7 lifecycle stages with representative clause-cited derivations and score six XAI method classes structurally. Causal XAI emerges as structurally required to satisfy the derived criteria at three stages: hazard identification (+62% rubric gap), incident investigation (+50%), and data management (+50%); the verdict set is stable across thresholds T in (0%, 50%]$ and survives a worst-case single-cell flip down to T = 25%. At the remaining four stages, correlational or language-based methods are comparable or sufficient. The rubric identifies structural admissibility (necessary but not sufficient for compliance): an admissible method's specific output content may still be wrong, and validating that fidelity (the edges a fitted SCM produces, the cause a trace names) is the open assurance challenge. A single-VLA proof of concept on 1,996 real-world driving clips (79,840 rows, ten splits) is consistent with each method's observed output type matching its rubric prediction. XAI method selection for ADS safety assurance should be driven by lifecycle-stage evidence demand, not by method popularity.

24.
arXiv (CS.CL) 2026-06-11

Agreement in Representation Space for Open-Ended Self-Consistency

Self-consistency improves LLM reasoning by sampling multiple outputs and selecting the most consistent answer, but existing formulations largely rely on exact matching and therefore remain limited to tasks with categorical outputs. In this work, we study self-consistency in open-ended generation tasks such as code synthesis and text summarization. We hypothesize that consistency can be understood as a geometric property of the generation space, where semantically compatible generations concentrate in similar regions of representation space. To study this hypothesis, we introduce Embedding-Based Agreement (EBA), a simple training-free operationalization that estimates agreement by clustering sampled generations in embedding space. Through experiments on mathematical reasoning, code generation, and summarization, we show that agreement in representation space provides a robust and scalable signal of self-consistency for open-ended tasks. In particular, EBA consistently outperforms random selection and exhibits more stable scaling behavior than recent selection approaches based on LLM evaluation or uncertainty estimation. We further show that these agreement signals remain stable across model families and embedding spaces, even with native hidden representations. Finally, our analysis shows that the geometric location occupied by sampled generations is strongly correlated with generation quality: generations concentrated near central regions of representation space tend to correspond to more reliable outputs, whereas peripheral generations are substantially less accurate. Overall, our findings support viewing self-consistency as a property of the geometric organization of sampled generations rather than exact symbolic overlap.

25.
arXiv (CS.CV) 2026-06-15

Visual Quality Score Assessment of Large White Goods in Remanufacture with Multi-View Deformable-DETR

Remanufacturing large white goods is essential for a circular economy, yet visual quality assessment remains a manual bottleneck for training and pricing. Conventional detection methods require extensive annotation and struggle with small defects in high-resolution multi-view data. We present a multi-view framework based on Deformable-DETR for automated quality scoring that aggregates information across redundant views to extract fine-grained features. To enhance robustness with limited labels, we employ self-supervised pretraining followed by supervised fine-tuning on expert-annotated scores. Additionally, a linear projection over frozen feature maps identifies regions of interest to explain model decisions. Evaluated on an industrial multi-view dataset, our approach delivers precise quality assessments while reducing reliance on manual annotation and per-part customization, enabling scalable and transparent inspection for remanufacturing lines.