Academic Intelligence · Curated Daily

探索全球前沿学术脉络

AcademicHub 汇聚顶级期刊与预印本平台的实时文献。定制您的专属科研雷达,利用大语言模型自动生成交叉领域文献分析简报。

01.
arXiv (CS.AI) 2026-06-16

Multi-Sensor Fusion for UAV Classification Based on Feature Maps of Image and Radar Data

arXiv:2410.16089v2 Announce Type: replace Abstract: The unique cost, flexibility, speed, and efficiency of modern UAVs make them an attractive choice in many applications in contemporary society. This, however, causes an ever-increasing number of reported malicious or accidental incidents, rendering the need for the development of UAV detection and classification mechanisms essential. We propose a methodology for developing a system that fuses already processed multi-sensor data into a new Deep Neural Network to increase its classification accuracy towards UAV detection. The DNN model fuses high-level features extracted from individual object detection and classification models associated with thermal, optronic, and radar data. Additionally, emphasis is given to the model's Convolutional Neural Network (CNN) based architecture that combines the features of the three sensor modalities by stacking the extracted image features of the thermal and optronic sensor achieving higher classification accuracy than each sensor alone.

02.
arXiv (CS.CV) 2026-06-12

EquiDexFlow: Contact-Grounded SE(3)-Equivariant Dexterous Grasp Generative Flows

Most learned dexterous grasp generators relegate contact forces to a downstream verification step, so a kinematically-plausible pose can still violate the conditions for a stable physical grasp. We address this with EquiDexFlow, an SE(3)-equivariant flow-matching model that jointly predicts wrist pose, joint angles, fingertip contacts, surface normals, and contact forces from an object point cloud. Our architecture projects contacts onto the object surface and forces into the Coulomb friction cone by construction, so placement and friction compliance hold without loss penalties. We prove end-to-end SE(3) equivariance and verify it empirically over 200 rotations, with wrist residuals below $0.04^\circ$ and exactly zero joint deviation. Trained on 8,100 force-closure grasps across 81 objects for the 16-DoF Allegro Hand, our model achieves zero friction violations, the best composite score, and the lowest wrench residual among all ablation variants. We retarget decoded fingertip contacts to a 16-DoF LEAP Hand via per-finger inverse kinematics, and our hardware-feasible refinement places every joint at least 5% inside its actuator envelope while preserving wrench balance. On the physical robot, retargeted EquiDexFlow-decoded grasps complete open-loop pick-and-hold trials on all six test objects, with every asymmetric object succeeding at both the canonical pose and a $120^\circ$ co-rotation. Videos, code, and checkpoints are available at https://equidexflow.github.io.

03.
arXiv (CS.LG) 2026-06-16

Beyond Artifacts: Towards Generalizable Synthetic Song Detection via Music-Intrinsic Features

arXiv:2606.16612v1 Announce Type: cross Abstract: The rapid advancement of AI music generators highlights the urgent need for reliable Synthetic Song Detection (SSD). Existing SSD methods often rely on low-level artifacts or fixed feature assumptions, struggling to capture generator-agnostic cues. To address this, we propose Sofia (Synthetic-song detection framework via music features), a flexible framework that models music-intrinsic attributes via feature-specific experts and an adaptive Mixture-of-Experts (MoE) module. By configuring Sofia with representative Vocal, Audio-effect, Global structure features, and their combinations, we present their individual and complementary contributions. To comprehensively evaluate our framework, we further construct MUSIC8K, a challenging benchmark featuring lastest emerging generators and realistic audio perturbations. Experiments show that Sofia learns generator-agnostic representations from music-intrinsic features, improving the F1 score by 18.5 points over the strongest baseline on MUSIC8K-O while maintaining strong robustness.

04.
arXiv (quant-ph) 2026-06-16

Fully Quantum Algorithm for the 1-dimensional linear Lattice Boltzmann Method

arXiv:2606.16514v1 Announce Type: new Abstract: A fully quantum algorithm for solving the one-dimensional linear advection-diffusion equation using the Lattice Boltzmann method as a numerical procedure is presented in this work. We start by presenting a state of the art of the current usage of quantum algorithms for solving ordinary and partial differential equations. We then describe two algorithms for the one-dimensional Lattice Boltzmann method with two degrees of freedom. The first one is an existing hybrid quantum-classical algorithm with measurements at each time step, and the second one is our improved version, viz. a fully quantum algorithm where only one measurement is needed at the end of the algorithm. The fully quantum algorithm is first executed on a quantum simulator and then compared with a classical approach. Subsequently, the fully quantum algorithm is run on a quantum system with 133 qubits to investigate the effect of noise and the depth of the circuit on the output state. We find fluctuations in the final result due to the decoherence noise of the qubits.

05.
arXiv (math.PR) 2026-06-17

On Injectivity of Phase Retrieval

作者:

arXiv:2606.17922v1 Announce Type: cross Abstract: In this short note, we prove that if $A \in \mathbb C^{N \times M}$ with $N=4M-5$ has i.i.d.\ standard complex Gaussian entries, then the probability that the phase retrieval map generated by $A$ is not injective is positive. This proves Part (1) of a conjecture of Cynthia Vinzant, which was later restated by Afonso S. Bandeira in [BDL+26]. The main result of this paper was obtained using generative AI, in particular the Rethlas system.

06.
arXiv (CS.CL) 2026-06-16

Beyond Layer Importance in Layer-wise Sparsity: An Inter-Layer Perturbation-Absorption Perspective

The considerable layer-wise redundancy in large language models (LLMs) has established non-uniform sparsity allocation across layers as the standard pruning approach for efficient compression. Existing layer-wise allocation methods that estimate allocation strategy from local signals such as activation outliers or weight spectra mainly derive from local layer importance, whereas the final post-pruning performance is also influenced by the network's subsequent compensatory capacity. In this paper, we directly characterize this property through controlled perturbation experiments. We make the following empirical findings. First, layers exhibit highly heterogeneous responses to pruning-scale perturbations. In most cases, early layers amplify perturbations, while middle and late layers actively absorb them, with relative L2 drift decreasing monotonically across depth and direction realigning toward the unperturbed hidden-state trajectory. Second, absorption is a large-perturbation phenomenon. Under small perturbations the network exhibits amplification across all layers, and the transition to absorption occurs smoothly as perturbation magnitude grows to pruning scale. This enriches the linearized accumulation theory underlying related works. Building on these findings, we define an absorption coefficient per layer and propose absorption-aware correction, an orthogonal augmentation that improves OWL and AlphaPruning by reducing perplexity by 7.13% and boosting zero-shot accuracy by 1.02% across multiple model families at 70% sparsity.

07.
bioRxiv (Bioinfo) 2026-06-11

Sequence-Based Therapeutic Peptide Classification with Augmented Negative Sampling

Therapeutic peptides offer high target specificity, low toxicity, and the ability to modulate protein-protein interactions, yet experimental functional characterization remains costly and slow. Computational prediction of therapeutic function directly from sequence could accelerate peptide screening and enable generative design pipelines, but requires reliable discrimination between therapeutic and non-therapeutic peptides. Existing multi-label predictors cover few functions, rely on limited datasets, and exhibit high glspl{fpr}, limiting their practical utility. We present a lightweight CNN classifier trained on the most comprehensive therapeutic peptide database to date (54,655 peptides, 48 functional categories). A key contribution is a statistically motivated negative sampling strategy using Markov models to generate diverse synthetic decoys at multiple difficulty levels. When evaluated on this controlled decoy benchmark, the FRP is reduced from over 60% for previous models to 2.1% for our approach. Our fine-tuned five-model ensemble achieves 78.9% Micro F1 and 54.6% Macro F1 while requiring only amino acid sequences as inputs. Analysis using a sparse L1-constrained variant of our model shows that convolutional filters capture conserved functional motifs and statistically improbable non-therapeutic patterns, with downstream layers combining these signals, providing mechanistic evidence that the network learns biologically meaningful structure. In a generalization task on the TPpred-LE benchmark, our model achieves 55.3% Micro F1 and 38.6% Macro F1, comparable to TPpred-LE trained on its native dataset (57.9%/38.1%) while predicting four times more therapeutic functions with four times fewer parameters. Code and models will be made available at https://github.com/terra-quantum-public/tq-therapep-ai.

08.
arXiv (CS.CL) 2026-06-11

Massive Open-Vocabulary Keyword Spotting

Automatic speech recognition systems have been shown to under-perform when it comes to transcribing words rarely seen in the training data, namely specialized terminology. Open-vocabulary keyword spotting, combined with contextual biasing, has been shown to mitigate this issue. However, existing systems can only handle glossaries of a few hundred terms without becoming an infeasible bottleneck. We propose a system that stores features with a memory footprint up to 128 times smaller than a comparable baseline and allows users to process massive databases while remaining open-vocabulary. Without fine-tuning the speech recognition model, our system achieves a comparable entity recall as uncompressed solutions, even in languages not seen during training.

09.
arXiv (CS.AI) 2026-06-19

QMFOL: Benchmarking Large Language Model Reasoning via Quantifiable Monadic First-Order Logic Test Case Generation

arXiv:2606.20227v1 Announce Type: new Abstract: Large Language Models (LLMs) have made significant progress in reasoning, particularly in deductive reasoning, which is crucial for high-stakes decision-making. As models improve, evaluation benchmarks should evolve to keep pace. However, existing benchmarks lack fine-grained control over logical complexity and struggle to balance semantic diversity with logical consistency. To address these issues, we propose QMFOL, an automated framework for generating monadic first-order logic reasoning tasks with quantifiable and controllable complexity. It constructs formal logical structures using conjunction and disjunction patterns, enabling precise control over reasoning depth, width, label types, and distractors. These structures are then translated into natural language via LLMs, with logical consistency ensured through round-trip verification using an external prover. Based on our framework, we build QMFOLBench, a benchmark comprising 2880 instances with 960 configurations across diverse logical and semantic dimensions. Evaluations on six large reasoning models (LRMs) and two LLMs show that performance degrades and computational overhead increases with rising logical complexity. Models perform better on True-labeled tasks than on False or Unknown ones, and exhibit sensitivity to semantic variation. Overall, QMFOL offers a scalable and reliable approach for constructing deductive reasoning benchmarks with controllable complexity, enabling more precise evaluation of reasoning capabilities in modern language models.

10.
medRxiv (Medicine) 2026-06-16

Development of a symptom-based severity score anchored to health-related quality of life post-COVID-19 within the population-based EPILOC cohorts

Purpose Because simple symptom counts treat all symptoms as equally important and may not adequately capture the HRQoL impact of heterogeneous post-COVID-19 symptoms, we aimed to develop an HRQoL-anchored symptom severity score providing an interpretable measure of post-COVID-19 disease burden. Methods Baseline data from the population-based EPILOC and EPILOC Omicron surveys (adults aged 18-65 years) were used to develop a symptom-based severity score anchored to physical and mental HRQoL assessed with the SF-12. A two-stage modelling approach was applied to identify HRQoL-relevant symptoms and to derive symptom-specific weights for physical and mental component scores, incorporating 30 ordinal symptom severity variables. Symptom-specific weights were extracted to compute physical, mental, and composite severity scores. Score interpretation was examined using external reference measures, including EPILOC case status, self-reported health recovery, and functional consequences. Results A total of 19,004 participants (mean age 44.3 years, 59.6% female) were included. Sixteen symptoms contributed to the physical and eleven to the mental HRQoL score, with a limited subset accounting for most of the HRQoL loss. Severity scores were heavily right-skewed, with 50.6% of participants showing no measurable HRQoL impairment. Higher scores correlated with lower self-reported recovery, and increased probability of rehabilitation use and health-related changes in working time, supporting convergent and criterion-related validity. Conclusions This study introduces a transparent, HRQoL-anchored symptom severity score that measures graded post-COVID-19 burden beyond simple symptom counts. The score may be particularly suited for longitudinal assessment of recovery trajectories.

11.
arXiv (CS.LG) 2026-06-18

Reinforcement Learning for Accelerated Aerodynamic Shape Optimisation

arXiv:2507.17786v2 Announce Type: replace Abstract: We introduce a reinforcement learning (RL) based adaptive optimization algorithm for aerodynamic shape optimization focused on dimensionality reduction. The form in which RL is applied here is that of a surrogate-based, actor-critic policy evaluation MCMC approach allowing for temporal 'freezing' of some of the parameters to be optimized. The goals are to minimize computational effort, and to use the observed optimization results for interpretation of the discovered extrema in terms of their role in achieving the desired flow-field. By a sequence of local optimized parameter changes around intermediate CFD simulations acting as ground truth, it is possible to speed up the global optimization if (a) the local neighbourhoods of the parameters in which the changed parameters must reside are sufficiently large to compete with the grid-sized steps and its large number of simulations, and (b) the estimates of the rewards and costs on these neighbourhoods necessary for a good step-wise parameter adaption are sufficiently accurate. We give an example of a simple fluid-dynamical problem on which the method allows interpretation in the sense of a feature importance scoring.

12.
medRxiv (Medicine) 2026-06-15

ECHOCARDIOGRAPHY ABNORMALITIES IN PREECLAMPSIA WITH SEVERE FEATURES.

Purpose To determine the frequency of echocardiographic abnormalities in women with preeclampsia with severe features. To describe the spectrum and types of echocardiographic abnormalities associated with preeclampsia with severe features. Method This is a Prospective observational study conducted in Vani Vilas hospital attached to Bangalore Medical College and Research Institute, Bangalore from January 2023 to December 2025. 560 pregnant women diagnosed with severe preeclampsia(SPE) were included in the study. Chronic hypertension without superimposed preeclampsia, underlying cardiac diseases and previous history of peripartum cardiomyopathy were excluded from the study. Transthoracic echocardiography-TTE (2D ECHO) was done to evaluate cardiac structure and function. Echocardiographic abnormalities identified during the study were documented and analysed using descriptive statistical methods. Results Abnormalities in ECHO was noted in 23.03%. A unique finding was the documentation of elevated pulmonary artery systolic pressures (PASP) suggestive of Pulmonary Hypertension (PH) (PASP >35 mm HG) among 20.25% of the participants. It was also the commonest abnormality on ECHO. Mild PH was the commonest (15.71%), moderate PH was seen in 3.92% and severe PH in 0.71% of cases. Next most frequent abnormality was moderate to severe valvular regurgitation (10%), followed by left ventricular hypertrophy (5.53%). Diastolic dysfunction (DD) was seen in 3.92%, systolic dysfunction(SD) in 3.57%, chamber dilatation in 3.57% and LV global hypokinesia in 3.03% cases of SPE Conclusion Preeclampsia with severe features (SPE) is associated with 23.03% abnormalities on echocardiography. SPE is associated with systolic dysfunction, diastolic dysfunction, chamber dilatation, valvular regurgitation, left ventricular hypertrophy and pulmonary hypertension.

13.
arXiv (quant-ph) 2026-06-17

Cumulant expansion approach to the decay dynamics of interacting Mössbauer nuclei after strong impulsive excitation

arXiv:2510.00970v2 Announce Type: replace Abstract: Recent progress in accelerator-based x-ray sources brings higher excitation of ensembles of Mössbauer nuclei closer to experimental feasibility. Yet, a theoretical modeling of the decay dynamics of the interacting nuclear ensemble after the impulsive excitation is still an open challenge. Here, we derive a set of nonlinear equations which is capable of efficiently modeling large nuclear ensembles for arbitrary degrees of excitation. As key signature for higher excitation, we identify a non-linear time-evolution of the nuclear dipole phase, which can be tuned via the scattering geometry, and interferometrically be measured. Furthermore, we identify interesting finite-size effects in the nuclear dynamics of small ensembles. Our results provide important guidance for future experiments aiming at the non-linear excitation of nuclei. We further envision the exploration of finite size-effects in Mössbauer spectroscopy with highest spatial resolution, i.e., small sample volumes.

14.
bioRxiv (Bioinfo) 2026-06-16

Evidence for recombination in dengue virus genomes

Recombination is a key driver of RNA virus evolution, yet its extent and evolutionary implications in dengue virus (DENV) remain incompletely understood. We conducted a comprehensive, genome-wide recombination screen across 6,905 complete DENV genomes representing all four serotypes, 82 countries, and eight decades of sampling (1944-2023) retrieved from the Bacterial and Viral Bioinformatics Resource Center. Using seven complementary recombination detection methods implemented in RDP5, we identified 66 recombination events across 53 unique recombinant sequences, of which 29 are newly described. Events included intra-genotypic (n = 18), inter-genotypic (n = 32), and inter-serotypic (n = 16) exchanges spanning 14 genotypes and four continents, with no meaningful serotype-level enrichment (Cramer's V = 0.054). Recombination was concentrated in non-structural genes, most frequently NS3 (19 events), NS5 (17), and NS2 (12), while the capsid gene contained no recombination events, consistent with strong functional constraint. Single-nucleotide polymorphism analyses confirmed low divergence between recombinants and their inferred parents in both recombinant and non-recombinant regions. Phylogenomic analysis of 6,642 sequences revealed that recombinants cluster significantly closer to their major parents (p = 8.9 x 10-6 ) and that their removal does not significantly alter tree topology (p = 0.898), suggesting that the short length of recombinant regions limits phylogenetic conflict. We also introduce RECOSIM, an unsupervised machine-learning tool for recombination detection that achieved higher precision than RDP5 on both simulated (93.4% vs. 80.0%) and empirical (98.1% vs. 39.3%) datasets. Collectively, these results establish recombination as a widespread, pan-serotypic phenomenon in DENV with implications for genomic surveillance, vaccine evaluation, and evolutionary inference.

15.
arXiv (CS.LG) 2026-06-11

Mahalanobis-Guided Latent OOD Detection for Hybrid ES-DRL Control in Time-Varying Systems

arXiv:2606.11474v1 Announce Type: new Abstract: In this paper, we study Mahalanobis-guided latent out-of-distribution (OOD) detection for test-time RL controller switching in nonlinear time-varying systems. RL controllers can quickly control high-dimensional systems within the training distribution, but their performance can degrade when time-varying dynamics produce unseen observations. We consider a combined ES–DRL controller, where RL provides fast in-distribution actions and bounded extremum seeking (ES) provides robust model-independent control under OOD operation. The key challenge is deciding when to switch. We train a variational autoencoder (VAE) on in-distribution beam-profile observations and use Mahalanobis distance in the VAE latent space to detect OOD beam profiles at test time. This OOD decision sets a binary switch that selects either the RL controller or the ES controller. We evaluate the approach in safety-critical particle accelerator control. In this setting, spatial magnet motion creates OOD beam profiles that were not seen during RL training. Visualization of the VAE latent space shows that the proposed method identifies this OOD scenario and provides an interpretable signal for switching between RL and ES in the combined controller.

16.
arXiv (CS.CL) 2026-06-11

On the Optimal Reasoning Length for RL-Trained Language Models

Reinforcement learning substantially improves reasoning in large language models, but it also tends to lengthen chain-of-thought outputs and increase computational cost. Although length-control methods have been proposed, the length-accuracy relationship they induce remains unclear. We train policies with several length-control methods on multiple base models in a controlled setup and find that, across both mathematical reasoning and code generation, accuracy is non-monotonic in output length, peaking at an intermediate value. Mode accuracy, however, continues to improve with length even in settings where sample accuracy plateaus or declines, indicating that the non-monotonic length-accuracy relationship is driven by dispersion around an increasingly correct center.

17.
bioRxiv (Bioinfo) 2026-06-17

An Integrated Framework for Transcriptomic Characterization and Lorentzian Hyperbolic Visualization of a High-Risk Topological Branch in Alzheimer's Disease

Alzheimer's disease (AD) is a highly heterogeneous brain disorder in which molecular alterations vary across brain regions, disease stages, and patient subgroups. This study introduces an integrated analytical framework for characterizing transcriptomic variation associated with a high-risk topological branch, which was identified based on Lorentz distance in postmortem Brodmann area 36 samples from the Mount Sinai Brain Bank cohort, where over 70% of samples were in Braak stages V-VI. The framework integrates weighted gene co-expression network analysis, repeated stability-based differential expression analysis, network-level gene filtering, Gene Ontology enrichment, and nested stratified cross-validation to evaluate whether topological branch-associated genes capture biologically meaningful signals and carry predictive information for high-Braak group status. The identified gene sets were functionally enriched for neuronal development, neuron projection organization, synaptic signaling, vesicle fusion, and regulated synaptic release, suggesting that the high-risk topological branch reflects biologically relevant transcriptomic programs linked to neurodegenerative progression. Nested cross-validation further showed that the selected genes achieved measurable internal predictive performance for distinguishing high-Braak samples. As a second methodological contribution, we introduced a Lorentzian hyperbolic variant of t-distributed stochastic neighbor embedding (Lorentz t-SNE) to explore latent non-Euclidean structure in transcriptomic data. This method embeds samples in hyperbolic space, providing an alternative to Euclidean embeddings for representing hierarchical or nonlinear structures. Compared with conventional Euclidean embeddings, the proposed Lorentz t-SNE revealed a more localized organization of high-Braak samples. Together, these results demonstrate the utility of the proposed analytical framework and Lorentz t-SNE for investigating heterogeneous, potentially non-Euclidean organization in AD transcriptomes.

18.
arXiv (CS.LG) 2026-06-16

On the Energy Distribution of the Galactic Center Excess' Sources

arXiv:2507.17804v2 Announce Type: replace-cross Abstract: The Galactic Center Excess (GCE) may yet herald the discovery of annihilating dark matter. Weighing against that conclusion are analyses showing evidence for dim point sources within the spatial structure of the emission. Due to technical limitations these analyses are purely spatial with all spectral information that could disentangle the excess from astrophysical backgrounds discarded. Here, we demonstrate that a neural network simulation-based inference approach can jointly analyze the spatial and spectra data. The addition is profound: energy information drives the putative point sources to be significantly dimmer, indicating either the GCE is truly diffuse in nature or made of an exceptionally large number of sources. Quantitatively, for our best fit background model, the excess is essentially consistent with Poisson emission as predicted by dark matter. If due to point sources, our median prediction is $\mathcal{O}(10^5)$ sources, or more than 35,000 at 90\% confidence, both orders of magnitude larger than the hundreds preferred by earlier point-source analyses of the GCE, although variations allowed by background systematics could reduce the required number of sources by roughly an order of magnitude.

19.
arXiv (CS.CV) 2026-06-18

FlowObject: Flow Steering for Bridging Generative Priors and Reconstruction Fidelity

Recovering complete 3D representations of objects from few casual image captures remains a significant challenge. Recent 3D generative models, particularly those based on Flow-Matching (FM), can synthesize high-quality textured assets; however, they often suffer from ''synthetic bias'' where learned priors override observational evidence, alongside a lack of alignment with the observed instance. Conversely, optimization-based methods like 3D Gaussian Splatting (3DGS) provide high fidelity on visible surfaces but fail to reason about unobserved geometry. In this paper, we present FlowObject, a framework that reformulates sparse-view 3D reconstruction as a training-free, guided inverse problem. Our approach applies a dual-space guidance strategy to steer the Ordinary Differential Equation (ODE) trajectory of a flow-matching model, enabling the completion of unseen regions through learned generative priors while enforcing strict consistency with real-world observations. By integrating a 3DGS refinement stage, FlowObject further bridges the gap between ''synthetic-looking'' generative outputs and photorealistic reconstructions. Comprehensive benchmarks on synthetic and real-world datasets demonstrate that current state-of-the-art methods often struggle to achieve geometric completeness and observational consistency simultaneously, especially under severe occlusions. In contrast, our method significantly outperforms state-of-the-art generative models and optimization-based frameworks in both geometric completeness and view-dependent appearance fidelity.

20.
arXiv (CS.LG) 2026-06-12

DeepJEB++: Foundation Model-Driven Large-Scale 3D Engineering Dataset via 2D Latent Space Augmentation

arXiv:2606.12994v1 Announce Type: new Abstract: Data-driven engineering design is constrained by the lack of large-scale 3D datasets that pair geometry with physics-based performance labels. In particular, existing 3D data augmentation techniques have limitations in preserving subtle and diverse geometric variations, and it remains difficult to automate the subsequent simulation-labeling process, where boundary conditions vary depending on the generated geometry. We present DeepJEB++, a foundation-model-driven data-augmentation framework that expands a small seed set of jet engine brackets into a large, simulation-labeled 3D dataset under constrained resources. Our key idea is to augment in the data-rich 2D latent space, then transfer to 3D. In Stage 1, we fine-tune a pretrained 2D latent diffusion model on multi-view renders and synthesize novel views by latent interpolation, retaining manufacturable designs through a vision-language-model (VLM) quality filter. In Stage 2, the validated images are lifted to 3D meshes by a domain-adapted generative foundation model. In Stage 3, an automated pipeline recognizes the load and bolt interfaces on each mesh and assigns finite-element labels – mass, stress, and displacement – without manual intervention. We assess augmentation quality along three intrinsic axes: manufacturability, label fidelity against the SimJEB ground truth, and distributional consistency. Starting from fewer than 400 seed designs, DeepJEB++ yields 15,360 simulation-labeled 3D brackets – a 40x expansion – using a single GPU per stage. The dataset will be made publicly available to support reproducible engineering-AI research.

21.
arXiv (CS.LG) 2026-06-19

Alternating Direction Method of Multipliers for Nonlinear Matrix Decompositions

arXiv:2512.17473v3 Announce Type: replace-cross Abstract: We present an algorithm based on the alternating direction method of multipliers (ADMM) for solving nonlinear matrix decompositions (NMD). Given an input matrix $X \in \mathbb{R}^{m \times n}$ and a factorization rank $r \ll \min(m, n)$, NMD seeks matrices $W \in \mathbb{R}^{m \times r}$ and $H \in \mathbb{R}^{r \times n}$ such that $X \approx f(WH)$, where $f$ is an element-wise nonlinear function. We evaluate our method on several representative nonlinear models: the rectified linear unit activation $f(x) = \max(0, x)$, suitable for nonnegative sparse data approximation, the component-wise square $f(x) = x^2$, applicable to probabilistic circuit representation, and the MinMax transform $f(x) = \min(b, \max(a, x))$, relevant for recommender systems. The proposed framework flexibly supports diverse loss functions, including least squares, $\ell_1$ norm, and the Kullback-Leibler divergence, and can be readily extended to other nonlinearities and metrics. We illustrate the applicability, efficiency, and adaptability of the approach on real-world datasets, highlighting its potential for a broad range of applications.

22.
arXiv (CS.CL) 2026-06-11

Energy-Efficient On-Device RAG on a Mobile NPU: System Design and Benchmark on Snapdragon X Elite

Retrieval-Augmented Generation (RAG) pipelines are compute-intensive, combining embedding, retrieval, reranking, and large language model (LLM) generation. Running them entirely on-device benefits privacy, latency, and offline use, but the energy cost of CPU inference is a major barrier. We present what is, to our knowledge, the first end-to-end RAG pipeline that runs all neural stages – embedding, reranking, and LLM generation – on the Qualcomm Hexagon NPU of the Snapdragon X Elite. Profiling on a Dell XPS 13 laptop, we compare NPU-accelerated RAG against CPU and OpenCL/Adreno GPU baselines on indexing and query workloads. On indexing, the NPU achieves 9.1x higher embedding throughput and 12.3x less system energy. On a 120-query Wikipedia-passage benchmark, it delivers 18.1x faster LLM prefilling, 4.0x lower end-to-end query latency, and 4.0x less system energy than the CPU baseline; the same workload on the integrated GPU is 1.7x slower than CPU and uses 6.5x more energy than the NPU. A GPT-4.1 LLM-as-judge evaluation finds NPU answer quality on par with CPU and GPU within evaluator noise (mean 9.32 vs. 8.95 vs. 9.03 on a 1-10 rubric), with 86.7% of queries scoring identically across all three backends. On the Snapdragon X Elite / Hexagon class of laptop SoC, the NPU thus enables practical, energy-efficient on-device RAG without quality regression – a sustainable path toward green edge intelligence that we expect to generalize to comparable mobile NPUs (Apple Neural Engine, Intel NPU, MediaTek APU) as their software stacks mature.

23.
arXiv (CS.AI) 2026-06-19

Reinforcement-aware Knowledge Distillation for LLM Reasoning

arXiv:2602.22495v3 Announce Type: replace-cross Abstract: Reinforcement learning (RL) post-training has recently driven major gains in long chain-of-thought reasoning large language models (LLMs), but the high inference cost of such models motivates distillation into smaller students. Most existing knowledge distillation (KD) methods are designed for supervised fine-tuning (SFT), relying on fixed teacher traces or teacher-student Kullback-Leibler (KL) divergence-based regularization. When combined with RL, these approaches often suffer from distribution mismatch and objective interference: teacher supervision may not align with the student's evolving rollout distribution, and the KL regularizer can compete with reward maximization and require careful loss balancing. To address these issues, we propose RL-aware distillation (RLAD), which performs selective imitation during RL – guiding the student toward the teacher only when it improves the current policy update. Our core component, Trust Region Ratio Distillation (TRRD), replaces the teacher-student KL regularizer with a PPO/GRPO-style likelihood-ratio objective anchored to a teacher–old-policy mixture, yielding advantage-aware, trust-region-bounded distillation on student rollouts and naturally balancing exploration, exploitation, and imitation. Across diverse logic reasoning and math benchmarks, RLAD consistently outperforms offline distillation, standard GRPO, and KL-based on-policy teacher-student knowledge distillation.

24.
bioRxiv (Bioinfo) 2026-06-21

Antibody-Antigen Affinity Prediction with Chain-Aware Protein Language Modeling

Motivation: Antibody-antigen affinity determines which antibodies advance in therapeutic discovery, repertoire analysis and affinity maturation, but experimental measurements are sparse relative to the scale of sequence libraries. Structure-based predictors can exploit interface geometry when reliable complexes are available, yet early discovery often requires ranking many heavy-light chain pairs against antigens for which no complex structure exists. Existing sequence-based models are scalable, but frequently compress heavy and light chains into a single antibody representation or concatenate antibody and antigen features obscuring the chain-specific and epitope-specific signals that drive binding. Results: We present AbAffinity, a sequence-only chain-aware three-stream architecture that maintains heavy chain, light chain and antigen as distinct streams. It integrates frozen ESM-2 embeddings with heavy-chain CDR-focused pooling, heavy-light self-attention, adaptive fusion gating and gated cross-attention, training only a compact interaction module. On the SAAINT-DB benchmark, AbAffinity achieves strong predictive performance under ten-fold cross-validation and maintains robust accuracy on novel antigens. It consistently outperforms recent sequence-based models across external benchmarks including SAbDab, AB-Bind and SKEMPI 2.0. Ablation studies highlight the contributions of chain-specific representations, CDR-focused pooling and the gated interaction pathway. Integrated Gradients attributions recover known paratope and epitope residues at structurally validated interfaces. AbAffinity provides a lightweight, explainable sequence-first framework for antibody triage and prioritisation when structural information is limited or unavailable.

25.
arXiv (CS.AI) 2026-06-19

CADBench: A Multimodal Benchmark for AI-Assisted CAD Program Generation

arXiv:2605.10873v2 Announce Type: replace-cross Abstract: Recovering editable CAD programs from images or 3D observations is central to AI-assisted design, but progress is difficult to measure because existing evaluations are fragmented across datasets, modalities, and metrics. We introduce CADBench, a unified benchmark for multimodal CAD program generation. CADBench contains 18,000 evaluation samples spanning six benchmark families derived from DeepCAD, Fusion 360, ABC, MCB, and Objaverse; five input modalities including clean meshes, noisy meshes, single-view renders, photorealistic renders, and multi-view renders; and six metrics covering geometric fidelity, executability, and program compactness. STEP-based families are stratified by B-rep face count and all families are diversity-sampled to support controlled analysis across complexity and object variation. We benchmark eleven CAD-specialized and general-purpose vision-language systems, generating more than 1.4 million CAD programs. Under idealized inputs, specialized mesh-to-CAD models substantially outperform code-generating VLMs, which remain far from reliable CAD program reconstruction. CADBench further reveals three recurring failure modes: reconstruction quality degrades with geometric complexity, CAD-specialized models can be brittle under modality shift, and model rankings change across metrics. Together, these results position CADBench as a diagnostic testbed for measuring progress in editable 3D reconstruction and multimodal CAD understanding. The benchmark is publicly available at https://github.com/anniedoris/CADBench.