Academic Intelligence · Curated Daily

探索全球前沿学术脉络

AcademicHub 汇聚顶级期刊与预印本平台的实时文献。定制您的专属科研雷达,利用大语言模型自动生成交叉领域文献分析简报。

01.
arXiv (CS.CV) 2026-06-16

Bridging Geographic Bias in Urban Streetscape Inference via Lifelong Learning with Visual-Semantic Pivoting

作者:

Visual perception of urban streetscapes underpins evidence-based decisions in landscape planning, public health, and place-making. Yet models trained on a few well-photographed metropolises systematically misjudge underrepresented districts, propagating geographic bias into downstream policy. We address this gap with HVSP-LL, a lifelong learning framework that couples a stratified visual-semantic pivoting module with an equity-aware rehearsal mechanism. The pivoting module organises landscape concepts along a three-tier ontology (macro structure, meso composition, micro element) and aligns image features to learnable semantic anchors at each tier, providing transferable representations that resist distributional drift. The lifelong adaptation component sequentially absorbs new urban regions while constraining inter-region perception gaps through a worst-region sample-reweighting objective and a structurally-aware exemplar buffer. We evaluate HVSP-LL on a panoramic streetscape benchmark assembled from twelve cities across four continents and seven perceptual dimensions. The framework attains 0.834 Spearman correlation on the held-out city sequence, an absolute 6.1 point improvement over the strongest continual baseline, and shrinks the inter-city perception gap to 0.094 – a 38% reduction relative to the strongest continual baseline (0.151) and a 57% reduction relative to a representative regularisation baseline (0.218). Ablations confirm that each tier of the pivoting hierarchy contributes monotonically, and the equity-aware rehearsal converts mean backward transfer from -0.038 (without retention) to +0.013, eliminating catastrophic forgetting on the held-out sequence. Our results indicate that hierarchical anchoring is a practical pathway toward geographically equitable streetscape inference at city scale.

02.
arXiv (CS.LG) 2026-06-15

AGORA: Can Deliberation and Governance Gates Absorb Participation Bias in Transit Planning?

arXiv:2606.13696v1 Announce Type: cross Abstract: Transit network design depends not only on the optimization algorithm but also on who shows up to the public hearing. Current practice often collects one-directional comments from self-selected attendees, leaving participant mix as an uncontrolled source of outcome variation. We present AGORA, a framework that holds the network, demand, and solver fixed while systematically varying meeting composition through stakeholder agents, structured deliberation, and governance gates. Across two standard benchmark networks at different scales, we find that (i) aggregate outcomes vary little across compositions, but on tail risk and fairness disparity, representative sampling still tends to outperform skewed compositions; (ii) without deliberation, composition produces no variation at all, showing that deliberation is the mechanism through which who attends affects outcomes; and (iii) governance gates compress cross-profile variance without shifting the average outcome on Mandl, but low acceptance on Mumford0 shows thresholds require instance-specific calibration. These findings reframe participation bias from an uncontrollable input to a process-design problem: even without guaranteed representative attendance, well-structured deliberation and governance criteria can substantially reduce how much outcomes depend on who is in the room.

03.
arXiv (CS.AI) 2026-06-18

WorldLines: Benchmarking and Modeling Long-Horizon Stateful Embodied Agents

arXiv:2606.18847v1 Announce Type: new Abstract: To assist humans over extended periods in real homes, embodied agents must remember user routines, world states, and past interactions. Existing long-term memory benchmarks mainly evaluate language-centric retrieval and question answering, while embodied benchmarks often focus on short-horizon task execution without testing long-term memory use in dynamic environments. We introduce WorldLines, a project-driven benchmark for long-horizon embodied household assistance. It constructs temporally extended household traces with dialogues, actions, execution feedback, object and device state changes, and converts them into evidence-linked samples for Memory QA and Embodied Task Planning. We further propose ObsMem, an observer-grounded memory framework that maintains visibility-aware memories and action-native state trails for state-aware decisions. Experiments reveal persistent challenges in partial observability, overwritten world states, and translating long-term memory into embodied plans, while ObsMem offers a stronger reference architecture for this setting.

04.
arXiv (quant-ph) 2026-06-11

The quantum harmonic oscillator and the real Hilbert space

arXiv:2606.12060v1 Announce Type: new Abstract: The harmonic oscillator is considered within generalized frameworks using complex and quaternionic numbers. The classical oscillator is considered in terms of a complex position function, and quantum oscillators are examined in terms of complex wave functions, and in terms of quaternionic wave functions as well. Both of the quantum solutions are obtained within the real Hilbert space formalism. The results reveal the complex and quaternionic descriptions as suitable frameworks for non-stationary processes, including damped oscillations, forced oscillations, and additionally self-interacting processes that cannot be appropriately described otherwise.

05.
arXiv (CS.CL) 2026-06-17

Continuous Language Diffusion as a Decoder-Interface Problem

Gaussian-corrupted sentence embeddings have no direct linguistic interpretation, yet continuous diffusion language models can generate fluent text from them. We study this puzzle through Embedded Language Flows (ELF) and identify a decoder-basin mechanism: our evidence suggests that denoising becomes reliable when trajectories reach regions where the native decoder can read stable tokens. We introduce a diagnostic protocol for denoisability, semantic recoverability, order sensitivity, decoder compatibility, and trajectory reliability. It exposes failures hidden by scalar metrics: low mean-squared error can discard linguistic content, low perplexity can reflect low-entropy collapse, and clean latent reconstruction can coexist with a narrow decoder basin. A decoder-margin bound explains why token recovery depends on margin and local decoder sensitivity, not latent error alone. Auditing public ELF checkpoints reveals an interface phase diagram: early predictions are weakly readable, mid-trajectory disagreement marks a competition region, and late predictions enter a high-margin decoder basin. Once inside, token realization is surprisingly simple on generated ELF states: frozen T5 (Text-to-Text Transfer Transformer) token-embedding lookup recovers $93$–$96\%$ of native decoder decisions, and a single linear readout reaches $97.9\%$ agreement at 32k samples, leaving an $\approx1.1$–$1.2$ perplexity gap in a structured residual tail. Under conservative held-out gates, a margin rule exits roughly $17$–$28\%$ earlier in denoising steps under an explicit diagnostic monitor. Boundary checks on LangFlow, BitstreamDiffusion, and the Continuous Latent Diffusion Language Model (Cola-DLM) show that the same interface questions remain meaningful when the state object and decoder change. Continuous and latent diffusion language models should therefore be evaluated as representation-decoder systems.

06.
arXiv (CS.LG) 2026-06-17

Provably Efficient Regularized Online RLHF with Generalized Bilinear Preferences

arXiv:2602.23116v3 Announce Type: replace Abstract: We consider the problem of regularized best-response max-regret minimization in online RLHF under general preferences and bandit feedback. While various regularizers are utilized to robustify alignment, known polylogarithmic regret guarantees remain heavily specific to KL. To investigate whether such fast rates extend beyond KL, we adopt the Generalized Bilinear Preference Model (GBPM) – capturing intransitive preferences over $d$-dimensional item-wise features via a rank-$2r$ skew-symmetric matrix – to isolate the impact of generic regularization. Crucially, under GBPM, we prove that the dual gap of any greedy policy is bounded by the squared estimation error, derived using only strong convexity and skew-symmetry. Under a feature coverage assumption, we establish a generic polylogarithmic regret of $\tilde{\mathcal{O}}(\eta d^4 C_{\min}^{-1} (\log T)^2 \wedge d^2 C_{\min}^{-1/2} \sqrt{T})$ with Greedy Sampling, and a dimension-wise improved regret (for well-conditioned arm-sets) of $\tilde{\mathcal{O}}(C_{\min}^{-2} \sqrt{\eta r T} \wedge r^{1/3} C_{\min}^{-4/3} T^{2/3})$ with Explore-Then-Commit, where $\eta^{-1}$ is the regularization coefficient, $T$ is the time horizon, and $C_{\min}$ is an arm-set dependent quantity. This demonstrates that ``fast'' regrets are not KL-specific, but rather a fundamental consequence of generic strongly convex geometry.

07.
arXiv (CS.LG) 2026-06-16

Context-Aware Markov VAE for CSI Compression in Wireless Systems

arXiv:2606.16607v1 Announce Type: cross Abstract: This paper considers neural channel state information (CSI) compression for time-varying massive multiple-input multiple-output (MIMO) channels in frequency division duplex (FDD) systems with limited feedback resources. The main challenge lies in obtaining a compact and efficient representation of the CSI given that it exhibits strong temporal correlation across successive snapshots. Existing memoryless compression models do not exploit this property, while simple temporal extensions often incorporate multiple observations without explicitly modeling the latent dynamics. We propose a context-aware compression framework based on a k-memory Markov variational autoencoder (k-MMVAE), which uses a finite temporal window to capture the evolution of CSI in the latent space. The model introduces Markov-structured latent dynamics with finite memory, enabling efficient use of temporal dependencies for compression. Simulation results show that the proposed approach improves target CSI reconstruction performance compared to memoryless and weakly sequential baselines, particularly at low and moderate compression rates. These results suggest that explicit latent temporal modeling can provide an effective mechanism for CSI compression under limited feedback constraints.

08.
arXiv (CS.LG) 2026-06-18

JourneyFormer: Encoding Airbnb Guest Journey with Sequence Modeling

arXiv:2606.19108v1 Announce Type: new Abstract: Sequence modeling has become increasingly popular in recommendation and ranking algorithms, owing to its capacity to model users' historical behaviors and infer user intentions. Despite its theoretical simplicity, the practical deployment of a sequence model in production is non-trivial due to complexity of the sequence and sparse labels. For example, in Airbnb, guest sequences are often long, exploratory and complex, and we focus on booking labels, which are sparse. As such, we are often required to make various design decisions regarding data and modeling to strike a balance between effectiveness and scalability. This work delved into these production challenges and deployed JourneyFormer, a sequence modeling solution for search ranking at Airbnb. We detail crucial design considerations, covering aspects such as guest event selection, ID embeddings, model architecture, and label attribution. Additionally, we describe several tailored strategies to accelerate model training and inference. JourneyFormer has been successfully deployed within Airbnb's production, where its effectiveness and impact have been evidenced not only by improved offline ranking metrics but also by significant gains in key business metrics through online A/B testing across 2 production surfaces.

09.
arXiv (CS.LG) 2026-06-11

Momentum LMS Theory beyond Stationarity: Stability, Tracking, and Regret

arXiv:2602.11995v2 Announce Type: replace Abstract: In large-scale data processing scenarios, data often arrive in sequential streams generated by complex systems that exhibit drifting distributions and time-varying system parameters. This nonstationarity challenges theoretical analysis, as it violates classical assumptions of i.i.d. (independent and identically distributed) samples, necessitating algorithms capable of real-time updates without expensive retraining. An effective approach should process each sample in a single pass, while maintaining computational and memory complexities independent of the data stream length. Motivated by these challenges, this paper investigates the Momentum Least Mean Squares (MLMS) algorithm as an adaptive identification tool, leveraging its computational simplicity and online processing capabilities. Theoretically, we derive tracking performance and regret bounds for the MLMS in time-varying stochastic linear systems under various practical conditions. Unlike classical LMS, whose stability can be characterized by first-order random vector difference equations, MLMS introduces an additional dynamical state due to momentum, leading to second-order time-varying random vector difference equations whose stability analysis hinges on more complicated products of random matrices, which poses a substantially challenging problem to resolve. Experiments on synthetic and real-world data streams demonstrate that MLMS achieves rapid adaptation and robust tracking, in agreement with our theoretical results especially in nonstationary settings, highlighting its promise for modern streaming and online learning applications.

10.
arXiv (CS.CV) 2026-06-12

Transformer-Guided Graph Attention for Direct Cardiac Mesh Reconstruction: A Structural Digital Twin Framework

Building patient-specific cardiac models sits at the heart of precision cardiology, yet getting those models into clinical use keeps running into the same wall: mesh generation is slow, messy, and frustrating. The standard workflow – segmenting the image, running Marching Cubes, and then manually cleaning up the result – is time-consuming, inconsistent across operators, and demands specialist knowledge most clinical teams do not have. We take a fundamentally different approach. Instead of treating segmentation and mesh generation as two separate problems, we train a single end-to-end network that goes directly from a raw 3D medical image to a smooth, simulation-ready cardiac surface mesh. The core is a 3D Swin Transformer encoder-decoder that extracts volumetric features from CT or MRI volumes, paired with a Graph Attention Network (GAT) head that iteratively deforms a template mesh to fit the patient's cardiac boundary. We tested on the MM-WHS 2017 benchmark using both CT and MRI. Segmentation scores were competitive (Dice of 0.84 on CT, 0.83 on MRI), but the primary focus is mesh quality: mean Chamfer distance of 1.8 mm, with 95th-percentile surface distance below 5 mm. Every mesh is produced in a single forward pass – no Marching Cubes, no smoothing filters, no manual cleanup. We argue that for cardiac digital twin pipelines, geometric fidelity and topological correctness matter more than pixel-level Dice scores. By removing the post-processing bottleneck, this approach makes patient-specific cardiac simulation substantially more accessible for clinical use.

11.
arXiv (CS.CV) 2026-06-17

ReAge3D: Re-Aging 3D Faces with View Consistency

We present a novel framework for realistic and controllable 3D face re-aging which produces highly detailed, identity-preserving results. Existing 3D editing methods, while effective for coarse semantic changes, are not well suited for re-aging, as even small inconsistencies across re-aged 2D views can lead to over-smoothing of subtle but perceptually important age-related details. To address this challenge, we first introduce a 2D diffusion-based re-aging model, DiffReaging, trained on synthetically generated image pairs. We further propose a center-out editing propagation strategy that leverages this re-aging model to reconstruct multi-view-consistent re-aged images. Specifically, starting from a re-aged frontal pivot view, we reconstruct the remaining views through warping and our proposed Masked-DiffReaging process. By injecting existing content at every step of the diffusion process, Masked-DiffReaging ensures that the reconstructed regions remain coherent with existing pixels. The resulting consistent set of re-aged views supervises the optimization of the re-aged 3D representation. Our method outperforms existing 3D editing techniques both visually and quantitatively, enabling smooth, fine-grained control over age transformations in 3D face models.

12.
arXiv (CS.CV) 2026-06-12

MPMWorlds: Material-Point-Method Simulations for Inferring and Extrapolating Physical Dynamics

To study the ability to infer physical dynamics from videos and extrapolate them forward in time, we assemble a dataset of 2D Material Point Method (MPM) physical simulations covering rich physical phenomena such as deformable objects, fluids, kinetic objects, and emitters. We study code generation and video diffusion approaches on this dataset, identifying their strengths and weaknesses by varying the amount of physically relevant side information. The code generation model, beyond giving a working demonstration of automatic synthesis of MPM simulations, reveals that such an approach struggles with inferring physical parameters from visual input, but relative to video diffusion, produces physically and temporally stable extrapolations forward in time, while the video diffusion model more strongly identifies geometric properties from visual input but produces physically implausible extrapolations.

13.
arXiv (CS.CV) 2026-06-11

SHERPA: Seam-aware Harmonized ERP Adaptation for Open-Domain 360$^\circ$ Panorama Generation

Panoramic imagery is increasingly used in world-generation, games, and simulation, where users may need not only photorealistic scenes but also stylized and non-photorealistic environments. Large-scale text-to-image diffusion and flow models provide broad style and semantic priors for this goal, but planar image training misaligns them with the wrap-around topology and polar regions of $360^\circ$ panoramas represented in equirectangular projection (ERP). We present SHERPA, a lightweight adaptation framework that combines frequency-selective Circular RoPE, Circular Latent Encoding/Decoding, image-side FFN adapters, and a Dual-Path Training Scheme. Circular RoPE replaces only the seam-sensitive high-frequency horizontal RoPE band with integer-periodic harmonics while preserving the pretrained lower-frequency spectrum. The Paired Panorama Path supervises geometry, while the Unpaired Style Path uses self-supervised yaw consistency for target-free stylized prompts. As a result, SHERPA generates $360^\circ$ panoramas across both photorealistic panorama domains and open-domain stylized prompts.

14.
Nature (Science) 2026-06-17

Optical fibre gripper for high-performance 3D micromanipulation

作者:

Optical tweezers offer precise, non-contact control, but operate in a limited force regime and impose strict requirements on the characteristics of the targets as well as the environmental conditions1–4. Millimetre-scale mechanical tweezers can offer higher gripping force but are not suitable for precise manipulations5–11. Integrating microgrippers directly at the optical fibres provides a new approach for precise micromanipulation. However, existing fibre-integrated tweezers still face challenges in achieving high-performance manipulation of micro-objects (for example, single cells) within narrow spaces, mainly due to simplified architectures, constrained designs and millimetre-scale footprints12–14. Here we report a three-dimensional (3D) optical fibre gripper (OFG), which is fabricated by two-step, two-photon polymerization. The OFG consists of rigid photoresist microclaws and soft thermoresponsive hydrogel muscle doped with silver nanoparticles, and its size is only 38 × 38 × 61 μm3. The OFG exhibits a force-to-mass ratio of about 340 μN mg−1, outperforming previously reported fibre-integrated tweezers by one to two orders of magnitude. The OFG can manipulate opaque particles, irregular micromechanical components and diverse single-cell types. We further demonstrated its potential in 3D microassembly of complex microdevices (bearings, shafts and gearboxes) and biomimetic sampling in the narrow environment (<300 μm). These results position the OFG as a compact fibre-tip manipulator for 3D micromanipulation, offering reversible and tunable gripping in an intermediate force regime between optical field trapping and millimetre-scale mechanical tweezers. A miniature three-dimensional optical fibre gripper enables powerful, precise micromanipulation of particles and single cells in confined spaces, bridging the gap between optical and mechanical tweezers.

15.
arXiv (CS.CV) 2026-06-16

Deep Learning in Seismic Interpretation: Federated Advances in Salt Dome Segmentation

Salt-dome delineation is a critical, high-impact task in subsurface geological interpretation, driving decisions in hydrocarbon exploration, reservoir modeling, and drilling safety. While convolutional encoder-decoder architectures have delivered significant improvements in automated salt segmentation, their widespread application is severely limited by data sovereignty concerns, dataset bias, and the scarcity of labeled seismic volumes. This paper introduces FedSaltNet, a Federated Learning (FL) framework explicitly engineered for robust, generalizable, and privacy preserving salt-dome segmentation. We couple a lightweight Small U-Net backbone, chosen for its efficiency and regularization properties with a novel Foreground-Weighted (FG-WEIGHTED) aggregation strategy designed to tackle domain-specific class imbalance. Through an extensive comparative study emulating non-IID conditions across four diverse seismic datasets (TGS, SEAM, F3, GBS), we demonstrate two critical findings: The FG-WEIGHTED algorithm effectively mitigates data heterogeneity, yielding a 4.0% relative improvement in Intersection over Union (IoU) over the best conventional FL method. The simple U-Net architecture proved essential, outperforming the higher capacity ResNet-18 U-Net variant by 166% in average IoU, underscoring the necessity of architectural simplicity in data-constrained federated environments. FedSaltNet provides a validated, high-performance solution that establishes the viability of federated deep learning for collaborative, next-generation subsurface interpretation.

16.
arXiv (CS.CV) 2026-06-11

Battery detection of XRay images using transfer learning

The need for detecting and sorting batteries is drastically increasing for many applications. This study proves the potential of transfer learning in predicting whether the image contains a battery or not, the location and identifying three types of batteries, namely: prismatic, pouch, and cylindrical Lithium-Ion Batteries (LIB). Particularly, it focuses on the transfer learning method in two applications: Training a large-scale dataset to detect electronic devices using a pre-trained YOLOv5m, then using these latter trained weights to detect and classify the batteries. The precision of battery detection achieves 94%, which outperforms the pretrained YOLOv5m weights with 5%, in 22 ms inference time.

17.
arXiv (CS.CV) 2026-06-18

Grids Often Outperform Implicit Neural Representations at Compressing Dense Signals

Implicit Neural Representations (INRs) have recently shown impressive results, but their fundamental capacity, implicit biases, and scaling behavior remain poorly understood. We investigate the performance of diverse INRs across a suite of 2D and 3D real and synthetic signals with varying effective bandwidth, as well as both overfitting and generalization tasks including tomography, super-resolution, and denoising. By stratifying performance according to model size as well as signal type and bandwidth, our results shed light on how different INR and grid representations allocate their capacity. We find that, for many tasks involving dense signals, a simple regularized grid with interpolation trains faster and to higher or comparable quality than any INR with the same number of parameters. We also find limited settings – namely fitting binary signals such as shape contours – where INRs outperform grids, to guide future development and use of INRs towards the most advantageous applications.

18.
arXiv (CS.LG) 2026-06-17

Tight $L_\infty$ Sample Complexity for Low-Degree and Sparse Boolean Polynomials

arXiv:2606.17319v1 Announce Type: cross Abstract: Motivated by the optimization of bounded binary black-box functions, we study the problem of learning polynomial surrogates over the Boolean hypercube. To ensure that optimizing the surrogate yields good solutions for the underlying objective, we require uniform $L_\infty$-error guarantees rather than the usual $L_2$-type guarantees. We characterize the minimax sample complexity of uniform estimation under subgaussian noise for two classes of bounded polynomials. First, for polynomials of degree at most $d$ on $n$ variables, the sample complexity scales as $n^{d+1}$. Second, for $s$-sparse Fourier-Walsh polynomials with $s \leq n$, it scales as $ns^2$. These rates differ structurally from the noiseless setting, where uniform exact recovery scales as $n^d$ and $ns$, respectively. Our lower bounds hold even for arbitrary adaptive learners, showing that the additional factors are intrinsic to the noisy cases. Standard Fourier-analysis tools for the $L_2$-norm do not naturally extend to the $L_\infty$-setting in a way that yields uniform guarantees. Our proofs overcome this difficulty by relying on suitably chosen auxiliary norms that serve as proxies for controlling the $L_\infty$-error. Together, our results provide a tight characterization of the sample complexity of learning optimization-safe polynomial surrogates.

19.
arXiv (CS.CL) 2026-06-11

FinTradeBench: A Financial Reasoning Benchmark for LLMs

Real-world financial decision-making is a challenging problem that requires reasoning over heterogeneous signals, including company fundamentals derived from regulatory filings and trading signals computed from price dynamics. Recently, with advances in Large Language Models (LLMs), financial analysts have begun to use them for financial decision-making tasks. However, existing financial question-answering benchmarks for testing these models primarily focus on company balance sheet data and rarely evaluate reasoning about how company stocks trade in the market or their interactions with fundamentals. To leverage the strengths of both approaches, we introduce FinTradeBench, a benchmark for evaluating financial reasoning that integrates company fundamentals and trading signals. FinTradeBench contains 1,400 questions grounded in NASDAQ-100 companies over a ten-year historical window. The benchmark is organized into three reasoning categories: fundamentals-focused, trading-signal-focused, and hybrid questions requiring cross-signal reasoning. To ensure reliability at scale, we adopt a calibration-then-scaling framework that combines expert seed questions, multi-model response generation, intra-model self-filtering, numerical auditing, and human-LLM judge alignment. We evaluate 14 LLMs under zero-shot prompting and retrieval-augmented settings and witness a clear performance gap. Retrieval substantially improves reasoning over textual fundamentals, but provides limited benefit for trading-signal reasoning. These findings highlight fundamental challenges in the numerical and time-series reasoning for current LLMs and motivate future research in financial intelligence.

20.
arXiv (CS.LG) 2026-06-16

FlowRL: A Taxonomy and Modular Framework for Reinforcement Learning with Diffusion Policies

arXiv:2603.27450v2 Announce Type: replace Abstract: Thanks to their remarkable flexibility, diffusion models and flow models have emerged as promising candidates for policy representation. However, efficient reinforcement learning (RL) upon these policies remains a challenge due to the lack of explicit log-probabilities for vanilla policy gradient estimators. While numerous attempts have been proposed to address this, the field lacks a unified perspective to reconcile these seemingly disparate methods, thus hampering ongoing development. In this paper, we bridge this gap by introducing a comprehensive taxonomy for RL algorithms with diffusion/flow policies. To support reproducibility and agile prototyping, we introduce a modular, JAX-based open-source codebase that leverages JIT-compilation for high-throughput training. Finally, we provide systematic and standardized benchmarks across Gym-Locomotion, DeepMind Control Suite, and IsaacLab, offering a rigorous side-by-side comparison of diffusion-based methods and guidance for practitioners to choose proper algorithms based on the application. Our work establishes a clear foundation for understanding and algorithm design, a high-efficiency toolkit for future research in the field, and an algorithmic guideline for practitioners in generative models and robotics. Our code is available at https://github.com/typoverflow/flow-rl.

21.
arXiv (CS.CL) 2026-06-16

When Do LLMs Reason? A Dynamical Systems View via Entropy Phase Transitions

Chain-of-thought (CoT) reasoning has become the default strategy for enhancing LLM capabilities, yet its application raises a fundamental question: when is explicit reasoning actually beneficial? Empirical evidence reveals a striking paradox: CoT often provides marginal or even negative gains on factual and open-ended tasks while multiplying token consumption. In this work, we show that LLM reasoning is not a static property of tasks or models, but a dynamic decoding state that emerges during generation. Through systematic analysis, we find early-stage entropy dynamics provide a reliable signal of this state: tasks benefiting from CoT exhibit consistent entropy reduction, while others display unstable or increasing patterns. This behavior can be interpreted as a phase-transition-like shift from a high-entropy exploratory regime to a low-entropy structured reasoning regime. Based on these insights, we propose EDRM (Entropy Dynamics-based Reasoning Manifold), a lightweight and training-free routing framework that leverages early decoding entropy to adaptively select inference strategies. EDRM embeds entropy trajectories into a compact and interpretable manifold representation, enabling both zero-shot deployment and fine-grained instance-level adaptation. Across 15 benchmarks and 4 LLMs of varying scales and architectures, EDRM consistently outperforms static baselines. At the dataset level, EDRM achieves 41–55\% token reduction while improving accuracy with as few as 50 calibration samples. At the instance level, it further improves accuracy by up to 4.7\% while maintaining 27–45\% token savings. These results suggest that reasoning should be invoked selectively rather than by default, and demonstrate the effectiveness of entropy-driven decoding control for efficient and adaptive LLM inference.

22.
arXiv (CS.CV) 2026-06-11

Auditing Demographic Bias in Facial Landmark Detection for Fair Human-Robot Interaction

Fairness in human-robot interaction critically depends on the reliability of the perceptual models that enable robots to interpret human behavior. While demographic biases have been widely studied in high-level facial analysis tasks, their presence in facial landmark detection remains unexplored. In this paper, we conduct a systematic audit of demographic bias in this task, analyzing the age, gender, and race biases. To this end, we introduce a controlled statistical methodology to disentangle demographic effects from confounding visual factors. Our analysis demonstrates that visual confounders, particularly head pose and face resolution, heavily outweigh the impact of demographic attributes. Notably, after accounting for these confounders, performance disparities across gender and race vanish. However, we identify a statistically significant age-related bias, with higher localization errors for older individuals. This shows that fairness issues can emerge even in low-level vision components and can propagate through the HRI pipeline. We argue that auditing and correcting such biases is a necessary step toward trustworthy and equitable robot perception systems.

23.
medRxiv (Medicine) 2026-06-15

Epileptogenicity alters intrahippocampal ripple propagation

Objective: Tracing the propagation of high-frequency oscillations (HFOs) aids in localizing epileptogenic regions and improving surgical outcomes. We examined how hippocampal epileptogenicity influences the propagation properties of the HFOs it generates. Methods: We analyzed non-REM sleep stereo-EEG from 49 patients (68 hemispheres) with verified hippocampal contacts. Hippocampi were stratified by excitability: 28 seizure onset zone (SOZ), 22 more-irritative non-SOZ (>6 interictal epileptiform discharges [IED]/min), and 18 less-irritative non-SOZ (

24.
arXiv (CS.CL) 2026-06-19

From Construction to Injection: Edit-Based Fingerprints for Large Language Models

Reliable model fingerprints are essential for protecting large language models (LLMs) against unauthorized redistribution and commercial misuse. In black-box deployment, verification is hindered by defensive filtering of suspected fingerprint queries, as well as by downstream model modifications that may weaken embedded ownership evidence. These risks require fingerprints to be robust in both construction and injection. For construction, prior paradigms face an imperceptibility trade-off: natural-language fingerprints may be accidentally activated, whereas garbled fingerprints are statistically exposed and easier to filter. For injection, existing methods struggle to preserve persistent trigger–target behaviors under model modification. We propose an end-to-end injected fingerprinting framework to address these challenges. Code-mixing Fingerprints (CF) use lowest-perplexity code-mixing under a high-complexity constraint to mitigate this two-sided imperceptibility trade-off. Multi-Candidate Editing (MCEdit) constructs structurally redundant, margin-separated trigger–target mappings to enable graceful degradation under model modification. Extensive evaluations on imperceptibility, detectability, and harmlessness demonstrate robust ownership verification with negligible impact on utility.

25.
bioRxiv (Bioinfo) 2026-06-18

Accounting for allelic diversity and multicopy gene detection improves the accuracy of antibiotic resistance genotypic determination

Background Genomic prediction of antimicrobial resistance (AMR) relies on the accurate detection of resistance genes or allelic variants of core genes from raw or assembled genomes sequences. For several bacterial species and antibiotics, AMR genotype-phenotype discrepancies are common, indicating that important sources of error remain unresolved. For Enterococcus faecium, we focused on identifying the sources of discrepancies for tetracycline resistance, for which genotypic detection had shown particularly low accuracy. We investigated the effect of structural variation in antibiotic resistance genes (ARGs), including gene duplications, truncations, interruptions, and mixed configurations of complete and partial gene copies, as a source of genotype-phenotype discrepancies from short-read data. We conduct further extended investigations to other antibiotic families and into another bacterial species: Escherichia coli. Methods We analyzed collections of E. faecium and E. coli genomes, integrating high-quality complete assemblies, simulated Illumina short reads, and matched AMR phenotypic data. The integrity, copy number, and allelic diversity of ARGs were examined for multiple antibiotic classes, and their impact on ARG detection and accuracy of AMR determination was assessed using several commonly used bioinformatic tools (SRST2, ARIBA and AMRFinderPlus). Results For E. faecium, after ruling out the effect of specific tet allelic variants on tetracycline susceptibility, we found that the integrity and copy number of tet(M) had a major effect on detection accuracy. Duplicated and incomplete ARGs are also common in E. faecium genomes, particularly for macrolides (erm(B)) and aminoglycosides (ant(6)-Ia and aph(3')-IIIa). In E. coli, similar patterns were observed for tet(A), erm(B) and aminoglycoside-associated genes (aph(3')-IIIa and ant(6)-Ia). Across ARGs in both species, short-read mapping methods wrongly reported interrupted genes as complete in some instances, while assembly-based methods often failed to resolve complete copies of duplicated genes. Detection accuracy improved when tools were adapted to account for gene integrity and when extended AMR databases incorporating species-specific alleles were included. Conclusions Our findings reveal that bioinformatic limitations in dealing with ARG copy number and completeness, and in accounting for allelic variation, underly a substantial source of genotype-phenotype errors, highlighting the need for improved AMR databases and bioinformatic tools that consider these factors to achieve reliable genomic prediction of AMR.