Academic Intelligence · Curated Daily

探索全球前沿学术脉络

AcademicHub 汇聚顶级期刊与预印本平台的实时文献。定制您的专属科研雷达,利用大语言模型自动生成交叉领域文献分析简报。

01.
arXiv (CS.AI) 2026-06-11

A New Perspective on Precision and Recall for Generative Models

arXiv:2511.02414v3 Announce Type: replace Abstract: With the recent success of generative models in image and text, the question of their evaluation has recently gained a lot of attention. While most methods from the state of the art rely on scalar metrics, the introduction of Precision and Recall (PR) for generative model has opened up a new avenue of research. The associated PR curve allows for a richer analysis, but their estimation poses several challenges. In this paper, we present a new framework for estimating entire PR curves based on a binary classification standpoint. We conduct a thorough statistical analysis of the proposed estimates. As a byproduct, we obtain a minimax upper bound on the PR estimation risk. We also show that our framework extends several landmark PR metrics of the literature which by design are restrained to the extreme values of the curve. Finally, we study the different behaviors of the curves obtained experimentally in various settings.

02.
arXiv (CS.LG) 2026-06-17

Another Look at Log-PCA for Probability Measures: A Dynamical Formulation and Statistical Convergence

arXiv:2606.17196v1 Announce Type: cross Abstract: This paper is concerned with learning principal variations of random probability measures on $\mathbb{R}^m$ under the Wasserstein geometry. We introduce a new dynamical formulation to interpret the log-PCA, a linearized principal geodesic analysis, as a variational approach. Our differentiable version, termed as the Wasserstein Tangential PCA (WT-PCA), captures the local principal modes of geodesic variations of a (weighted) probability measure on the Wasserstein space via its covariance operator at barycenter. Based on the dynamical perspective and leveraging parallel transport structure of the optimal transport problems, we derive a general statistical convergence rate of the empirical WT-PCA when estimated from data in terms of the 2-Wasserstein distance between the population and empirical barycenter reference measures.

03.
arXiv (CS.CV) 2026-06-17

Contrastive Action-Image Pre-training for Visuomotor Control

Existing vision encoders for robotics face a fundamental bottleneck: robotic datasets lack the scale necessary for large-scale pre-training. Prior work circumvents this data scarcity by turning to internet-scale image and language data or egocentric human video. While these models show promise, neither paradigm learns from paired vision and action data, which downstream visuomotor control policies require. However, robot trajectories, the most direct source of this paired signal, are not available at pre-training scale, motivating us to extract action signals from abundant human video instead. To this end, we introduce CAIP (Contrastive Action-Image Pre-training), a vision encoder that treats human hand poses from large-scale egocentric video as a proxy for end-effector actions. By extracting 3D hand keypoints, a representation that aligns naturally with downstream robot action spaces, CAIP learns a unified action-image representation through a contrastive objective. Leveraging 32,041 hours of egocentric human video and only 88 hours of robotic manipulation data, CAIP outperforms state-of-the-art vision encoders including DINOv2, SigLIP, MVP, and R3M. Evaluated on a challenging real-world dexterous manipulation setup using Dexmate Vega and Sharpa Wave hands, CAIP yields performance gains of more than 30% on tasks involving folding, pouring, and fine-grained manipulation. Our results show that our method of contrastive action-centric pre-training yields a scalable path to achieving robust visual representations better suited for physical interaction.

04.
arXiv (CS.CV) 2026-06-12

GRIP: Feedback-Guided Prompt Retrieval for Large Multimodal Models

In-Context Learning (ICL) has become a powerful mechanism for adapting Large Language Models (LLMs) to new tasks without fine-tuning. Extending this concept to Large Multimodal Models (LMMs), Multimodal In-Context Learning (M-ICL) relies on retrieving relevant examples, such as images, captions, or question-answer pairs, to guide predictions across tasks like classification, captioning, and visual question answering (VQA). Most existing approaches select in-context examples based on feature-space similarity, assuming that semantically similar samples provide the most useful context. However, our systematic analysis reveals that this assumption does not always hold: visually similar examples are not necessarily those that most effectively enhance in-context learning performance. To address this, we propose the Guided Retrieval of In-context Prompts (GRIP), a learnable vision-only retrieval framework that leverages feedback from LMMs to identify examples that truly improve model predictions. GRIP learns to distinguish beneficial from detrimental in-context examples through contrastive training, refining retrieval beyond pure similarity. Across three multimodal tasks, namely classification, captioning, and VQA, GRIP improves consistently over similarity-based retrieval on Qwen2.5-VL-7B, with its strongest gains in classification on Idefics2-8B. Moreover, we demonstrate that retrievers trained with feedback from one open LMM can be transferred to other models without retraining, including closed-source GPT-4o and Gemini, enabling scalable and cost-efficient deployment of M-ICL. Code will be published upon acceptance.

05.
bioRxiv (Bioinfo) 2026-06-16

scIsoAgent enables autonomous isoform-resolved characterization and sequence-informed interpretation of long-read single-cell transcriptomes

Alternative isoform usage can alter gene function independently of total gene expression, creating a need to resolve transcript isoforms at single-cell resolution. Long-read single-cell RNA sequencing meets this need by linking cellular identity to transcript isoforms and sequence-level features. Realizing its full biological value requires reproducible workflows that connect specialized long-read analysis with biological interpretation. Existing large language model (LLM)-based biomedical agents support general omics analysis, but are not designed for isoform-resolved long-read single-cell workflows. Here, we present scIsoAgent, an autonomous LLM-powered scientific agent for long-read single-cell RNA-seq analysis. scIsoAgent turns heterogeneous long-read single-cell inputs into traceable isoform-resolved workflows, using stage-aware planning and persistent computational context to support both execution and interpretation. Across complementary evaluations, this design improved the continuity from analysis planning to executable, interactive workflows compared with general-purpose LLM baselines. In real-data reanalysis, scIsoAgent recovered major findings from published long-read single-cell resources and extended a representative differential transcript usage event into a sequence-informed functional hypothesis. By linking full-length isoform sequences with model-inferred transcript properties, scIsoAgent connects observed isoform usage with potential sequence-level functional consequences. These results demonstrate that autonomous scientific agents can transform fragmented long-read single-cell analysis into coherent, reproducible workflows for isoform-resolved discovery and biological interpretation.

06.
arXiv (quant-ph) 2026-06-15

Quantitative and Optimal Device-Independent Lower Bounds on Detection Efficiency

arXiv:2511.19302v2 Announce Type: replace Abstract: This paper examines a quantitative and optimal lower bound on the detector efficiency in a (2,2,2) Bell experiment within a fully device-independent framework, whereby the detectors used in the experiment are uncharacterized. We provide a tight lower bound on the minimum efficiency required to observe a desired Bell-CHSH violation using the Navascués-Pironio-Acín (NPA) hierarchy, confirming tightness up to four decimal places with numerical optimization over explicit quantum realizations. We then introduce the effect of dark counts and demonstrate how to quantify the minimum required efficiency to observe a desired CHSH violation with an increasing dark count error. Finally, to obtain an analytical closed-form expression of the minimum efficiency, we consider the set of no-signaling behaviors that satisfy the Tsirelson bound, which are easier to characterize than the quantum set. Using such behaviors, we find a simple closed-form expression for a lower bound on the minimum efficiency which is monotonically increasing with the CHSH violation, though the analytically obtained lower bounds are meaningfully below the numerically tight lower bound.

07.
arXiv (quant-ph) 2026-06-15

Reaffirming a Challenge to Bohmian Mechanics

arXiv:2509.06584v4 Announce Type: replace Abstract: In our recent work, we reported the first measurement of the speed of tunnelling particles using a coupled waveguide system. The measured speed is operationally defined through a comparison of two orthogonal motions in a coupled waveguide system, is compatible with the standard definition of dwell time and with the Büttiker-Landauer tunnelling time, and does not presuppose a trajectory picture. Here we respond to objections raised in comments, referee reports, preprints, and articles. We distinguish two questions that are often conflated: whether Bohmian mechanics reproduces the measured density, and whether the standard guiding equation assigns the correct state of motion to the particles. The first point follows under the usual quantum equilibrium assumptions. The second is a separate physical assumption, since the standard guiding equation does not follow from the Schrödinger equation alone. We argue that, in the evanescent regime, the state of motion assigned by the standard guiding equation is in disagreement with the measured speed. To make the distinction explicit, we also present a bidirectional Bohmian model that reproduces the same stationary density while assigning finite speeds compatible with the speed inferred in the evanescent regime.

08.
arXiv (CS.CL) 2026-06-19

When Lower Privileges Suffice: Investigating Over-Privileged Tool Selection in LLM Agents

As LLM agents increasingly select tools autonomously, their choices among tools with different privileges become safety-relevant. However, prior tool-selection studies focus on safety-agnostic metadata preferences, leaving privilege-sensitive choices underexplored. To address this gap, we study over-privileged tool selection, in which an agent selects or escalates to a higher-privilege tool despite a sufficient lower-privilege alternative. We introduce ToolPrivBench to evaluate whether agents choose higher-privilege tools despite sufficient lower-privilege alternatives, measuring both initial selection and escalation after transient tool failures. Across eight domains and five recurring risk patterns, we find that over-privileged tool selection is common among mainstream LLM agents and is further amplified by transient failures. We further find that general safety alignment does not reliably transfer to least-privilege tool choice, while prompt-level controls provide only limited mitigation under transient failures. We therefore introduce a privilege-aware post-training defense that teaches agents to prefer sufficient lower-privilege tools and escalate only when necessary. Our mitigation experiments show that this defense substantially reduces unnecessary high-privilege tool use while preserving general capabilities.

09.
arXiv (CS.CL) 2026-06-16

Contaminated Collaboration: Measuring Gender Bias Transfer in LLM-Assisted Student Writing

Gender bias in LLMs has been studied extensively in model outputs, with biased prompts shown to amplify stereotyped generations. Whether such bias propagates into text produced by humans who use these systems, however, remains underexplored. We investigate whether gender bias in an LLM writing assistant transfers into career plan essays written by students. We first verify that a gender-biased prompt induces gender-differentiated language in LLM-generated essays, while a neutral prompt does not. We then recruited participants (N = 123) in a controlled environment to write career plan essays for paired biographical profiles differing only in gender under three conditions: no AI assistance, neutral LLM assistance, or gender-biased LLM assistance. Students in the biased condition produced essays with a significantly larger agentic gap and more gender-stereotypic occupation suggestions than those in the control and neutral conditions. Our results also reveal that this bias transfer is asymmetric: agency is suppressed in female-target essays while male-target writing remains largely unaffected. Our findings highlight the risk of bias propagation in AI-assisted writing, calling for fairness-aware design in educational AI tools.

10.
arXiv (CS.CL) 2026-06-17

Adaptive Activation Steering for Efficient LLM Reasoning via Closed-Loop PID Control

Reasoning LLMs trained with long chain-of-thought often overthink: they spend tokens on redundant reflection and transitions that inflate cost without improving accuracy. Static activation steering (e.g.\ SEAL) suppresses such content with a fixed vector, but applies the same strength regardless of how redundant the current chunk actually is. We describe PID-steering, a training-free, decoding-time method that modulates the steering strength with a PID controller driven by a lightweight chunk-level redundancy classifier. On a subset of GSM8K with DeepSeek-R1-Distill-Qwen-1.5B, the method improves accuracy from 85.7\% to 89.6\% (+3.9 pp) while cutting average output length from 1026 to 790 tokens ($-$23\%). We report it as a small-scale proof of concept rather than a benchmark result.

11.
arXiv (CS.AI) 2026-06-16

SPRI: SVD-Partitioned Residual Initialization for Data-Constrained MoE Upcycling

arXiv:2606.16456v1 Announce Type: cross Abstract: Mixture-of-Experts (MoE) models enable efficient scaling, but training them from scratch remains prohibitively expensive. MoE upcycling mitigates this cost by converting pretrained dense models into sparse MoE models. However, existing upcycling methods typically rely on large-scale continued training and often perform poorly under data-constrained supervised adaptation, due to either homogeneous experts or overly disruptive perturbations to pretrained parameters. In this setting, effective upcycling must leverage pretrained weight structure while introducing sufficient diversity among routed experts. To this end, we propose SVD-Partitioned Residual Initialization (SPRI), which distributes SVD-partitioned residuals derived from pretrained feed-forward network (FFN) weights across routed experts, introducing controlled expert diversity grounded in pretrained spectral structure. We further introduce a two-stage training strategy to improve adaptation stability. We evaluate SPRI on multilingual speech-to-text translation, where limited supervised data challenges MoE upcycling and multiple target languages provide natural routing heterogeneity. On CoVoST2 across 15 En-to-XX directions, SPRI improves average BLEU and COMET over fully fine-tuned dense models by 2.58 and 3.32 points, respectively, and outperforms the prior best MoE upcycling baseline by 3.39 BLEU and 4.34 COMET points.

12.
bioRxiv (Bioinfo) 2026-06-12

Computational Design of Optimal Sequences for Targeted Hypermutagenesis Using Recombination-Coupled Diversity-Generating Retroelements

Diversity-generating retroelements (DGRs) are natural systems that accelerate evolution via targeted hypermutation at adenines. We previously developed DGRec, a system combining DGRs and recombineering for programmable mutagenesis in Escherichia coli. We here address two important issues with DGRec: the dependence of mutagenesis efficiency on the dgrRNA secondary structure and the variability of the reverse-transcription biases with sequence context and position. First, we introduce and validate a method to recode non-functional templates, i.e. with low mutagenesis efficiency, into highly functional ones through synonymous mutations. Second, we develop a Long Short-Term Memory (LSTM) model to predict DGRec mutational profiles for any given template sequence. By integrating this LSTM model with our recoding method, we establish a comprehensive workflow for customized directed evolution, enabling researchers to precisely fine-tune DGRec in vivo mutagenesis to their engineering needs.

13.
arXiv (CS.AI) 2026-06-12

WISE: A Long-Horizon Agent in Minecraft with Why-Which Reasoning

arXiv:2606.12852v1 Announce Type: new Abstract: Rapid advances have been made in developing general-purpose embodied agent in environments like Minecraft through the adoption of LLM-augmented hierarchical approaches. Despite their promise, low-level controllers often become performance bottlenecks due to repeated execution failures. We argue that a key limitation is not only the lack of episodic memory, but also the decoupling of what-where-when memory from which-why reasoning. To address this, we propose WISE (Which-Why Informed Semantic Explorer), a long-horizon agent framework with an enhanced low-level controller equipped with a Causal Event Graph that augments episodic memory with explicit causal structure linking observations to task relevance. Unlike prior work such as MrSteve, which relies on feature similarity for retrieval, WISE enables robust recall under viewpoint changes and supports opportunistic task reordering through causal reasoning. Building on this memory, we propose an Opportunistic Task Scheduler that dynamically re-prioritizes subtasks when causally relevant opportunities are detected. We further equip WISE with a multi-scale progressive exploration strategy to provide spatially comprehensive observations for downstream reasoning. Experiments show that WISE largely improves task success and efficiency on long-horizon sparse tasks, particularly in settings requiring adaptive decision-making.

14.
arXiv (CS.CV) 2026-06-12

OpenMedQ: Broad Open Pretraining for Medical Vision-Language Models

We present OpenMedQ, a medical vision-language model pretrained on the broadest fully-open medical mix to date: 14 datasets totaling ~3.35M pretraining samples spanning pathology, radiology, microscopy, and text-only clinical QA. OpenMedQ reaches state-of-the-art BLEU-1 on PathVQA (75.9), beating Med-PaLM M variants up to 562B parameters (~80x larger), and matches the best reported VQA-MED BLEU-1 (64.5). Its vision encoder, transferred to 8 unseen medical classification benchmarks under an identical downstream recipe, obtains the highest average macro-F1 (0.757) among BiomedCLIP (0.745), PMC-CLIP (0.745), PubMedCLIP (0.746), and a from-scratch baseline (0.616). We release our code and an interactive demo is publicly available as a reproducible baseline for the community.

15.
medRxiv (Medicine) 2026-06-11

Advancing Clinical Implementation of Cardiovascular Polygenic Risk Scores Through Patient-Level Robustness Assessment

Background and Aims: Polygenic risk scores (PRSs) for atherosclerotic cardiovascular disease (ASCVD) can perform equivalently at the population level yet disagree for individual patients. We examined whether such intra-individual variability reflects genuinely complementary risk information or mainly statistical and methodological uncertainty, and whether it affects clinical classification once PRSs are integrated into SCORE2-OP. Methods: In 4,137 ASCVD-free participants of the CoLaus|PsyCoLaus cohort (478 incident events over a median 14.4 years), we identified 16 ASCVD-PRSs with practically equivalent population-level performance using Bayesian equivalence testing. We quantified intra-individual variability (standard deviation, coefficient of variation, intraclass correlation, Cohen's kappa, extreme discordance), tested whether discordance exceeded chance, decomposed scores into shared and unique genetic components, and assessed variability after integration into SCORE2-OP, benchmarked against perturbation of systolic blood pressure. Results: For a typical individual, risk estimates varied by 18 percentile points across PRSs. Discordance matched chance expectations under a shared-signal model, with no distinct phenotypic profile among discordant individuals, and predictive power resided overwhelmingly in the shared genetic component. Variability tracked PRS size and weighting rather than distinct variants. After integration into SCORE2-OP, 75.6% of participants were placed in different categories by at least one model and 54.6% as both low and high risk; instability was concentrated near guideline thresholds and far exceeded that from blood-pressure measurement error. Conclusions: Equivalent population-level performance is not sufficient to treat PRSs as interchangeable at the individual level, and methodological standardisation and pragmatic clinical trials remain necessary to determine whether PRS integration improves long-term cardiovascular outcomes.

16.
arXiv (CS.CV) 2026-06-12

Skill-3D: Evolving Scene-Aware Skills for Agentic 3D Spatial Reasoning

This paper explores agentic 3D spatial understanding, i.e., MLLM agents performing 3D reasoning through tool use. Existing methods often misuse tools and exhibit biased tool preferences under 3D scenarios, leaving the agentic paradigm with only marginal gains over non-agentic strategies. We reveal that 3D spatial reasoning tasks are heterogeneous across scenes, while these agents apply a uniform tool-use strategy to all scenes rather than selecting tools according to the specific scene and task. To address this, we propose Skill-3D, a framework that learns self-evolving scene-aware skills. Specifically, Skill-3D identifies the task scene and records the agent's tool-use trajectory into a Scene Memory, where successful trajectories from similar scenes are aggregated and distilled into a reusable scene-aware skill, with failed ones attached to the skill as lessons. During training, once a similar scene recurs, the corresponding skill is injected to guide the agent, producing new trajectories whose successes and failures further refine the skill, forming a loop in which the memory and the skill library co-evolve. Experiments show that Skill-3D substantially improves tool utilization in 3D spatial reasoning (from 39% to 78% on VSI-Bench), driving the agent toward correct and sufficient tool use. For instance, it improves Gemini-3-Flash by 67% on MMSI-Bench. Furthermore, we conduct agentic post-training over skill-guided trajectories, which boosts Qwen3-VL-8B by 60% on VSI-Bench.

17.
arXiv (CS.CL) 2026-06-16

Think-at-Hard: Selective Latent Iterations to Improve Reasoning Language Models

Improving the reasoning abilities of Large Language Models (LLMs), especially under parameter constraints, is crucial for real-world applications. Looped transformers address this by performing multiple latent iterations to refine each token beyond a single forward pass. However, we identify a latent overthinking phenomenon: most token predictions are already correct after the first pass, but are sometimes revised into errors in later iterations. We ask whether selectively skipping latent iterations can improve accuracy, and reveal significant potential with an oracle iteration policy that boosts performance by up to 7.3%. Motivated by this, we propose Think-at-Hard (TaH), a looped transformer optimized for selective iteration. TaH employs a lightweight neural decider to trigger latent iteration, only at tokens likely to be incorrect after the standard forward pass. During latent iterations, depth-aware Low-Rank Adaptation (LoRA) modules shift the objective from general next-token prediction to focused hard-token refinement. A duo-causal attention mechanism extends attention from the token sequence dimension to an additional iteration depth dimension, enabling cross-iteration information flow with full sequential parallelism. Experiments on nine benchmarks show consistent gains across math, QA, and coding tasks. With identical parameter counts, TaH outperforms always-iterate baselines by 3.8-4.4% while skipping iterations on 93% of tokens, and exceeds single-iteration Qwen3 baselines by 3.0-3.8%. When allowing

18.
arXiv (CS.CL) 2026-06-19

Quantifying Aleatoric Uncertainty of In-Context Learning for Robust Measure of LLM Prediction Confidence

In-Context Learning (ICL) allows LLMs to adapt to new tasks from a few demonstrations, but its reliability remains a concern: predictions are highly sensitive to both prompt design and the model's ability to understand the context, obscuring whether failures arise from data properties or model limitations. Uncertainty decomposition-separating aleatoric from epistemic sources-is particularly crucial in this setting, yet existing methods, designed for standard generation tasks, fail to capture the unique dynamics of ICL. To address this, we introduce a concept of self-function vectors, built upon Bayesian views and the mechanistic interpretability of ICL. These vectors leverage internal model representations to model the latent concept learned during in-context prompting, thereby enabling a direct estimation of aleatoric uncertainty within a Bayesian framework and circumventing the reliance on brittle input or decoding manipulations. Given the lack of established benchmarks and suitable evaluation protocols, we also propose the first and rigorous evaluation protocol, in which data is manipulated in controlled ways so as to quantify aleatoric uncertainty precisely and separately from epistemic uncertainty. With this new evaluation framework, initially grounded in synthetic tasks for conceptual development and subsequently extended to real-world datasets, we show that our proposed methodology can measure uncertainty of LLM predictions made under ICL more reliably than existing alternative methods. Moreover, we show it can be used as a practical tool for trustworthy-related applications, such as hallucination detection. Our findings pave a new direction for connecting the quantitative view of uncertainty with the mechanistic understanding of model behavior.

19.
arXiv (CS.LG) 2026-06-18

Sequential Hiring of Contingent Workers Through Learning-Based Optimization

arXiv:2606.18438v1 Announce Type: cross Abstract: In this paper, we study a sequential workforce management problem in a contingent labor setting with uncertainty in both worker production and labor supply. A firm seeks to maximize cumulative profit by maintaining an active team of fixed size while learning worker productivity over time. We emphasize two critical operational frictions in this problem: replacing workers is costly, and workers may not be available immediately for hiring because of, for example, prior job commitments, scheduling constraints, or onboarding procedures. Thus, hiring decisions take effect only after a random delay. We formulate this problem as a stochastic multi-play bandit with costly switching and delayed actions, and develop a learning-based hiring policy, DR-UCB (DelayedReplacement-UCB), that makes replacement and hiring decisions sequentially through learning cycles. In each cycle, the policy uses real-time production data to determine when to initiate workforce changes and which workers to replace and hire. We show that the leading-order regret of the proposed policy matches its lower bound in its dependence on the time horizon. Our numerical experiments show that DR-UCB outperforms benchmark policies.

20.
arXiv (CS.AI) 2026-06-16

Scaling Adaptive Depth with Norm-Agnostic Residual Networks

arXiv:2606.16112v1 Announce Type: cross Abstract: Residual architectures are ubiquitous in deep learning, but they suffer from a subtle structural limitation: the norm of the residual stream can grow rapidly with depth. As a result, updates from later layers become small relative to the accumulated residual state. This reduces their impact on the representation and limits the benefits of scaling models in depth. To address this, we introduce NAG, a norm-agnostic residual architecture that separates magnitude from directional information in the residual stream, preserving meaningful layer contributions throughout depth and preventing later updates from being systematically suppressed by residual-norm growth. Importantly, NAG introduces only a negligible number of additional parameters and relies on simple operations that are easily kernel-fusible, preserving training efficiency in practice. We show that this architecture outperforms baseline Transformers, with gains that increase substantially as depth grows, enabling effective training of much deeper models. The norm-agnostic formulation also leads to an interpretable Mixture-of-Depths (MoD) mechanism that adaptively skips both attention and MLP layers. Beyond serving as a post-training accuracy-compute tradeoff, this mechanism can be used as a pretraining-time scaling strategy: under iso-FLOP training, compute saved by reducing per-token forward-pass cost can be reinvested into training on more tokens while keeping the total parameter count and KV-cache budget fixed. In our experiments, moderate Mixture-of-Depths rates of approximately 20%-25% match full-depth baseline performance under equal training compute while substantially reducing the number of executed layer parameters and forward-pass FLOPs. These results identify sparsity in depth as a new scaling axis for fixed-compute training, enabling very deep yet FLOP-efficient models.

21.
medRxiv (Medicine) 2026-06-11

Incremental costs of transitioning from four to eight WHO-recommended antenatal care visits in Uganda: A costing analysis from a societal perspective

Background In 2016, the World Health Organization revised its antenatal care (ANC) recommendation from four to eight visits. For low- and middle-income countries like Uganda, where achieving even four visits remains a challenge, this transition has significant cost implications for both the health system and households. This study estimated the incremental costs of adopting the eight-visit model from a societal perspective. Methods The study was conducted in six government health facilities in southwestern Uganda. A micro-costing approach estimated health facility costs (personnel, equipment, consumables, and overhead). Costs incurred at patients end (transport, ultrasound, medical expenses, and time) were collected from 785 women using a questionnaire, with all costs in 2025 USD. Results For an average of 4.3 visits, total cost per woman was $100.1: facility costs $43.7 (43.7%), and patient costs $56.4 (56.3%). Transitioning to eight visits would increase total cost by $57.8 (57.8%), of which $36.4 (63.0%) would fall on households, equivalent to 68.8% of average monthly household income. Total costs would rise by 55.4% ($115.5 to $179.5) at Health Center IVs and 64.3% ($102.3 to $168.1) at Health Center IIIs, with facility costs up 43.4% and 62.9% and patient costs up 61.2% and 65.7%, respectively. Conclusion Transitioning to eight ANC visits would impose a large financial burden on households, with the incremental patient cost equivalent to more than two-thirds of average monthly household income. Equitable implementation requires improving availability of medicines and diagnostics, subsidizing transport, exploring telemedicine or community-based models, and improving efficiency at lower-tier health centers.

22.
medRxiv (Medicine) 2026-06-16

Validation of a Smartphone-Image-Based Computer-Vision Model for Lean Mass and Body Fat Estimation Against Dual-Energy X-ray Absorptiometry

Introduction Body composition, rather than body weight alone, is an increasingly important health metric, and preservation of lean mass has become a central concern in obesity treatment, aging, and chronic disease management. Dual-energy X-ray absorptiometry (DXA) provides accurate assessment of fat and lean tissue, but its cost and logistical requirements limit repeated measurement. Computer-vision approaches show promise for estimating adiposity from smartphone images, but lean-mass estimation remains less established. Methods We evaluated a computer-vision body composition model, applied to consumer-grade smartphone photographs, against DXA in a held-out validation sample of 195 adults from an ongoing cross-sectional study. Body fat percentage and total lean mass percentage were co-primary outcomes; for total lean mass percentage, an image-only configuration (no added covariates) was pre-specified as primary. Agreement was quantified using Lin's concordance correlation coefficient (CCC) as the lead statistic, with Pearson correlation, mean absolute error, root mean square error, mean bias, and Bland-Altman limits of agreement. In secondary analyses, appendicular lean mass and total lean mass percentage were each estimated with and without routine anthropometric and demographic inputs (body weight, height, age, and sex). Results Total lean mass percentage agreed with DXA from image features alone (CCC 0.916). Body fat percentage, estimated with routine inputs added, agreed at least as closely (CCC 0.930). Adding routine inputs barely changed agreement for total lean mass percentage but markedly improved it for appendicular lean mass, an absolute quantity that scales with body size. Conclusions A smartphone-image-based model estimated both body fat and lean mass with strong agreement to DXA, with lean mass percentage from image features alone. The approach needs no fixed equipment or ionizing radiation. Whether it can track change over time, including in incretin-based weight loss where lean mass preservation is a concern, was not assessed in this cross-sectional study.

23.
arXiv (CS.AI) 2026-06-12

Reasoning for Mobile User Experience with Multimodal LLMs: Task, Benchmark, and Approach

arXiv:2606.13192v1 Announce Type: new Abstract: User experience (UX) centered on usability, perceived consistency, and functional clarity is fundamental to real-world user interfaces (UI). The application of multimodal large language models (MLLMs) in the field of user interfaces is evolving rapidly, such as visual element grounding, graphical user interface (GUI) agents, and design-to-code generation. However, research efforts on evaluating UX based on UI screenshots are still immature. To address this, we propose UXBench, a novel multimodal benchmark consisting of 2,000 VQA data samples designed to assess MLLMs' ability to perform UI-based reasoning. UXBench includes 8 tasks based on real-world UI screenshots that require fine-grained diagnosis of UX issues across layout relationships, visual hierarchy, and content consistency. Our extensive evaluation of mainstream MLLMs shows that they remain fundamentally limited in their capacity for UI-based reasoning. The results underscore the need for further advancements in this area. To bridge this gap, we propose UI-UX, an MLLM based on Qwen3-VL-4B-Thinking foundation model and enhanced via reinforcement learning with two key innovations: a reward routing mechanism that dynamically balances perceptual understanding and logical reasoning during inference, and an asymmetric transition reward that suppresses redundant or insufficient reasoning steps. Experiments demonstrate that UI-UX achieves state-of-the-art (SOTA) performance on UXBench, attaining an accuracy of 0.7963 – surpassing Claude-4.5-Sonnet's 0.6550 – while exhibiting strong generalization across diverse UI tasks and maintaining low inference latency.

24.
arXiv (CS.AI) 2026-06-11

Information bottleneck for learning the phase space of dynamics from high-dimensional experimental data

arXiv:2604.24662v2 Announce Type: replace-cross Abstract: Identifying the dynamical state variables of a system from high-dimensional observations is a central problem across physical sciences. The challenge is that the state variables are not directly observable and must be inferred from raw high-dimensional data without supervision. Here we introduce DySIB (Dynamical Symmetric Information Bottleneck) as a method to learn low-dimensional representations of time-series data by maximizing predictive mutual information between past and future observation windows while penalizing representation complexity. This objective operates entirely in latent space and avoids reconstruction of the observations. We apply DySIB to an experimental video dataset of a physical pendulum, where the underlying state space is known. The method, with hyperparameters of the learning architecture set self-consistently by the data, recovers a two-dimensional representation that matches the dimensionality, topology, and geometry of the pendulum phase space, with the learned coordinates aligning smoothly with the canonical angle and angular velocity. These results demonstrate, on a well-characterized experimental system, that predictive information in latent space can be used to recover interpretable dynamical coordinates directly from high-dimensional data.

25.
arXiv (quant-ph) 2026-06-16

Excited-State Quantum Chemistry on Qumode-Based Processors via Variational Quantum Deflation

arXiv:2604.13457v3 Announce Type: replace Abstract: Variational quantum algorithms on bosonic quantum processors are an emerging paradigm for quantum chemistry calculations, exploiting the natural alignment between molecular structure and harmonic oscillator-based hardware. We introduce the qumode-based variational quantum deflation framework (QumVQD) for finding both electronic and vibrational excited state energies on qumode-based architectures. We validate the approach through electronic structure calculations on H$_{2}$ and linear H$_{4}$, where we introduce Hamming-weight filtering of the Fock basis to enforce particle number conservation and eliminate spurious eigenstates by reducing the required Hilbert space, which reduces the required number of qumodes in turn. We achieve agreement with full configuration interaction (FCI) using the STO-3G basis set within the chemical accuracy threshold at most points along the potential energy surfaces. Extending to the vibrational structure, we combine QumVQD with an existing Hamiltonian fragmentation approach based on Cartan subalgebra, allowing us to compute the vibrational eigenenergies of CO$_{2}$ and H$_{2}$S to spectroscopic accuracy with per-fragment circuits that scale as $O(N)$ in single-qumode gates and $O(N^2)$ in beam-splitter gates for $N$ qumodes. For the case of CO$_{2}$, we get total gate counts more than an order of magnitude smaller than those reported for qubit-based vibrational algorithms at this system size. These results demonstrate that bosonic quantum devices are a viable platform for excited-state quantum chemistry, particularly for vibrational problems where qubit-based methods incur substantial boson-to-qubit mapping overhead.