Academic Intelligence · Curated Daily

探索全球前沿学术脉络

AcademicHub 汇聚顶级期刊与预印本平台的实时文献。定制您的专属科研雷达,利用大语言模型自动生成交叉领域文献分析简报。

01.
medRxiv (Medicine) 2026-06-15

Routine use of oral iron for people with heart failure and iron deficiency in primary care; retrospective cohort study

Aims: Iron deficiency is common among people with heart failure and associated with morbidity and mortality. While intravenous iron improves clinical outcomes, oral iron continues to be prescribed in routine practice despite limited evidence of benefit. Methods: We completed a retrospective primary care cohort study (2016 to 2021) to investigate the proportion of people with an incident diagnosis of heart failure who had iron deficiency identified (defined as ferritin

02.
arXiv (CS.LG) 2026-06-16

How Much Capacity Does EEG Denoising Need? Ultra-Compact Networks reveal Benchmark Saturation and Metric-Utility Gap

arXiv:2606.08594v2 Announce Type: replace Abstract: Deep learning EEG denoising architectures have scaled from tens of thousands to tens of millions of parameters, yet no prior study has isolated model capacity as the experimental variable or tested whether reconstruction metrics predict downstream neural-signal utility. We address both gaps by fixing architecture, loss, data split, and training recipe while sweeping only channel width from 1.05K to 40.26K parameters in a minimal depthwise-separable convolutional U-Net. Models were evaluated on the EEGDenoiseNet benchmark, cross-dataset BCI transfer tests, controlled baseline retraining, and downstream motor-imagery classification with five decoder families across all nine BCI Competition IV-2a subjects. Reconstruction performance saturated by 3-6.5K parameters, with post-elbow gains of at most 0.015 correlation coefficient per log10-parameter unit. An 8.46M-parameter baseline retrained under the same pipeline matched the 40.26K compact variant on EOG–a 200x parameter gap yielding no advantage–while a Patch-Transformer control reproduced the same diminishing-return shape. Downstream evaluation exposed a classifier-dependent metric-utility gap: reconstruction-optimized denoising significantly degraded CSP+LDA classification across all nine subjects and three artifact types (best denoised accuracy 0.547 vs. 0.612 noisy baseline; Bonferroni p=0.0488), persisting on naturally recorded trials (Delta=-0.047; BH-FDR q=0.0049). End-to-end neural decoders showed variable or neutral effects. Standard EEG denoising benchmarks are saturated far below current model capacity, and reconstruction metrics do not predict BCI utility. Ultra-compact models at 33-46 KB and 1.27-2.61M FLOPs/segment are practical for edge deployment. These findings argue for capacity-controlled evaluation, harder task-aware benchmarks, and mandatory downstream validation.

03.
arXiv (CS.AI) 2026-06-12

GeoNatureAgent Benchmark: Benchmarking LLM Agents for Environmental Geospatial Analysis Across Frontier and Open-Weight Foundation Models

arXiv:2606.12821v1 Announce Type: new Abstract: Environmental scientists spend disproportionate effort on data wrangling rather than analysis, and AI agents that automate geospatial workflows remain unvalidated: no benchmark evaluates agents operating through structured tool calling against real APIs. We introduce the GeoNatureAgent Benchmark, the first benchmark for environmental analysis agents that operate via structured tool calls to a production-style geospatial API. It comprises 93 tasks across 18 categories, covering municipality analysis, multi-turn conversation, spatial reasoning, cross-indicator synthesis, error handling and recovery, ranking, comparison, multilingual understanding, habitat analysis, and task rejection. Tasks are evaluated against an open, self-hostable API serving three environmental indicators across Spain and Portugal via sixteen tools. We evaluate seven LLMs (Claude Sonnet 4, DeepSeek V3.2, GLM-5, Gemini 2.5 Pro, Qwen3-235B, GPT-OSS-120B, Llama 4 Scout) under three temperature-1.0 seeds, reporting capability and per-case cost as orthogonal axes. We find: (1) Claude Sonnet 4 leads at 60.8% +/- 0.8%, followed by DeepSeek V3.2 at 56.3% +/- 3.1%, with no other model above 51%; (2) the cost-accuracy Pareto frontier is occupied mostly by open-weight models, with DeepSeek V3.2 offering 93% of Claude's capability at 11x lower cost ($0.011/case); (3) comparison tasks remain universally unsolved (0% on close-value comparisons), exposing systematic reasoning limits; and (4) structured tool calling against a real API is more discriminative than general-purpose GIS benchmarks, with accuracies 25-35 points lower. We further show extensibility by integrating BigEarthNet V2 land cover for Portugal alongside Spanish CO2 and erosion indicators. The benchmark, harness, and self-hostable API are publicly available.

04.
arXiv (CS.CV) 2026-06-16

To forget is to preserve: Machine Unlearning for 3D medical image segmentation

With new data privacy laws such as the General Data Protection Regulation (GDPR) [1] that allow individuals to ask that any of their personal information be erased from trained machine learning models, there has been a push to investigate the unlearning of data from models as a way to comply with these laws. In this regard, based on four mechanics, we consider several approximate unlearning strategies applied to the MRBrainS18 dataset [2]. We use a 3D ResNet-50 [3] as a backbone architecture for segmentation that has been pre-trained with the Med3D framework [4]. Considering the pre-trained model as a baseline, we evaluate respective retention accuracy on 2 types of subjects, i.e., retain and forget. We assess these approaches through their Dice similarity coefficient and mean absolute error (MAE) values using two separate training horizons 20 and 50 epochs. The results show that the Noisy Label strategy had the best overall trade-off with a decrease of 93% in the forget set while maintaining 84% accuracy for the retained set after 50 epochs. All other strategies showed extreme levels of forgetting at higher epoch numbers while also demonstrating catastrophic degradation of their retain set performance. The results of this study provide a strict baseline of performance metrics for unlearning on a subject-specific level and provide practitioners with clear criteria for selecting the proper strategies.

05.
arXiv (quant-ph) 2026-06-12

Coupling-Grouped XY-QAOA for Joint Anomaly-Feature Selection

arXiv:2606.13244v1 Announce Type: new Abstract: Selecting anomalous samples and explanatory features under fixed budgets defines a coupled constrained-optimization problem. Sequential feature-first selection ranks features before choosing samples, which can overlook features whose utility depends on which samples are selected, especially when scores are calibrated from reference data that may be limited, noisy, or drifting. We instead formulate the task as joint sample-feature selection under the same fixed counts. In the analyzed formal model, calibration-error sensitivity grows linearly with the number of samples for feature-first ordering but stays constant for joint selection. We introduce Coupling-Grouped XY-QAOA, a constraint-preserving grouped-angle variant for the resulting optimization problem. On matched sparse IBM Heron R3 benchmarks, a hardware-aware implementation reduces circuit depth by 45.9%-61.3% and two-qubit gates by 2.6%-5.2% relative to Qiskit optimization level 3 on the CZ-basis target. It enables, to our knowledge, the largest reported width-depth configurations for constraint-preserving bipartite-selection QAOA hardware executions with feasible-sector retention: 64 qubits at p=2 and 36 qubits at p=3. The 20-qubit p=5 runs retain 63% valid samples. Across 36-64 qubits, fixed-angle runs yield lower-energy feasible samples than matched random-feasible sampling. Warm starts reduce the gap to strict-feasible classical references by 57.5%-80.5%, and near-budget repair matches the sparse classical reference at 36 qubits. Benchmarks show gains in balanced fixed-budget regimes, and noiseless simulations show that problem-structured angle grouping improves over same-depth XY-QAOA and matched-parameter, type-preserving randomization controls. Overall, the results support calibrated joint selection and hardware-realizable constrained-mixer execution in the tested regimes.

06.
medRxiv (Medicine) 2026-06-17

Method comparisons for differentiation of Schizophrenia and Bipolar based on rs-fMRI Intrinsic and Functional Networks

Psychosis as a symptom manifests in schizophenia and bipolar disorder, two highly heterogeneous psychiatric illnesses with overlapping clinical manifestations. Resting-state functional Magnetic Resonance Imaging (rsfMRI), represents a promising tool for identifying objective biomarkers of functional brain alterations to aid differential diagnosis. In this work, we comparatively evaluate multiple rs-fMRI representations for differentiating schizophrenia and bipolar disorder using intrinsic connectivity network (ICN) temporal profiles and several functional network connectivity (FNC) approaches, including static, dynamic, and high-order connectivity analyses. The study was conducted on a cohort of 371 subjects with psychosis, while evaluation was performed using a separate held-out cohort of 315 subjects. We investigated convolutional neural network architectures applied to ICN temporal profiles, spectrograms, and scalograms, alongside classical machine learning models trained on connectivity-derived features. Across the evaluated approaches, ICN temporal profiles provided the most consistent discriminative performance, with a 1D convolutional neural network achieving the strongest overall results under the benchmark protocol. Among connectivity-based methods, static functional connectivity generally outperformed dynamic and high-order representations, suggesting that increased representational complexity did not necessarily translate into improved generalization. Although the obtained classification performance remained modest, the results highlight the challenges of robust psychosis differentiation using rs-fMRI while emphasizing the relative stability of low-order connectivity representations and temporal ICN features. These findings contribute to ongoing efforts toward reproducible and interpretable neuroimaging biomarkers for psychiatric disorders.

07.
arXiv (quant-ph) 2026-06-11

High-efficiency telecom conversion of heralded atomic biphoton wavepackets

arXiv:2603.09824v2 Announce Type: replace Abstract: We demonstrate high-efficiency telecom frequency conversion of heralded atomic biphoton wavepackets using a diamond-type atomic ensemble. By placing a 2.5 MHz heralded-photon spectrum within the high-efficiency region of the converter response, we achieve a conversion efficiency of 79.4(2.6)% while maintaining strong time-resolved correlations and well-defined temporal wavepackets. For a broader 17.4 MHz input bandwidth, the conversion efficiency is reduced to about 55%, whereas the temporal waveform remains largely preserved. This behavior reflects the nearly flat central response of the converter, which mainly causes spectral-edge loss rather than temporal-mode distortion. These results identify spectral matching as an effective route to efficient and low-distortion telecom conversion of narrowband quantum light from atomic systems.

08.
arXiv (CS.AI) 2026-06-19

A Multi-Agent system for Multi-Objective constrained optimization

arXiv:2606.20236v1 Announce Type: new Abstract: Many decision-making problems in computing and networking systems can be naturally formulated as cost-minimization problems under performance constraints. In dynamic environments, reinforcement learning (RL) is often used to solve such problems at runtime by embedding both costs and constraint violations into a single scalar reward through weighted penalty terms, following a Lagrangian-inspired formulation. However, in this context the behavior of the learned policy critically depends on the choice of these weights, which are typically selected manually. This makes it difficult to identify an appropriate trade-off between optimizing the primary objective and effectively avoiding constraint violations, particularly in non-stationary environments where their relative importance may change. This paper presents MAMO (Multi-Agent system for Multi-Objective constrained optimization), an approach to tackle this balancing problem through multi-agent RL. MAMO decouples task execution from objective design by formulating the selection of reward weights as a learning problem, providing a !rst step towards more autonomous and robust RL-based solutions for constrained optimization problems in dynamic environments.

09.
arXiv (CS.LG) 2026-06-17

The Implicit Bias of Steepest Descent with Mini-batch Stochastic Gradient

arXiv:2602.11557v2 Announce Type: replace Abstract: A variety of widely used optimization methods like SignSGD and Muon can be interpreted as instances of steepest descent under different norm-induced geometries. In this work, we study the implicit bias of mini-batch stochastic steepest descent in multi-class classification, characterizing how batch size, momentum, and variance reduction shape the limiting max-margin behavior and convergence rates under general entry-wise and Schatten-$p$ norms. We show that, without momentum, worst-case convergence and successful classification can only be guaranteed with full-batch gradient. In contrast, momentum enables small-batch convergence to an approximate max-margin solution through a batch-momentum trade-off, though it slows convergence. This approach provides fully explicit, dimension-free rates that improve upon prior results. Moreover, we prove that variance reduction can recover the exact full-batch implicit bias for any batch size, albeit at a slower convergence rate. Finally, we further investigate the batch-size-one steepest descent without momentum, and reveal its convergence to a fundamentally different bias via a concrete data example, which reveals a key limitation of purely stochastic updates. Overall, our unified analysis clarifies when stochastic optimization aligns with full-batch behavior, and paves the way for perform deeper explorations of the training behavior of stochastic gradient steepest descent algorithms.

10.
arXiv (CS.LG) 2026-06-16

Discovering Subgroups with Exceptional Survival Characteristics

arXiv:2602.22179v2 Announce Type: replace Abstract: In many applications, it is important to identify subpopulations that survive longer or shorter than the rest of the population. In medicine, for example, it allows determining which patients benefit from treatment, and in predictive maintenance, which components are more likely to fail. Existing methods for discovering subgroups with exceptional survival characteristics rely on restrictive assumptions about the survival model (e.g. proportional hazards), require pre-discretized features, and, as they compare average statistics, tend to overlook individual heterogeneity. In this paper, we propose Sysurv, a non-parametric, fully differentiable method that discovers human-readable rules selecting subgroups with exceptional survival characteristics. Empirical evaluation on a wide range of datasets and settings, including a case study on cancer data, shows that Sysurv reveals insightful and actionable survival subgroups, outperforming the state of the art.

12.
arXiv (CS.AI) 2026-06-16

Evidence of an Emergent "Self" in Continual Robot Learning

arXiv:2603.24350v3 Announce Type: replace-cross Abstract: A key challenge to understanding self-awareness has been a principled way of quantifying whether an intelligent system has a concept of a "self", and if so how to differentiate the "self" from other cognitive structures. We propose that the "self" can be isolated by seeking the invariant portion of cognitive process that changes relatively little compared to more rapidly acquired cognitive skills - because our self is the most persistent aspect of our experiences. We used this principle to analyze the cognitive structure of robots under two conditions: One robot learns a constant task, while a second undergoes continual learning under variable tasks. We find that robots subjected to continual learning develop an invariant subnetwork that is significantly more stable (p < 0.001) compared to the control, and that this subnetwork is also functionally important: preserving it aids adaptation while damaging it impairs performance. We validate this pattern across three different robots spanning locomotion and manipulation.

13.
arXiv (CS.CV) 2026-06-18

DINO-Med3D: Bridging Dimension and Domain Gaps in Volumetric Segmentation via Progressive Adaptation

Although DINOv3 has demonstrated remarkable semantic discrimination in natural imagery, its direct application to volumetric medical segmentation is hindered by inherent dimension and domain disparities. To resolve these issues, we propose DINO-Med3D, a two-stage progressive framework that repurpose the pre-trained DINOv3 encoder for 3D medical tasks. In the first stage, we mitigate the dimension gap by introducing a multi-slice embedding module that incorporates pseudo-3D context, while simultaneously employing a segmentation proxy task to adapt representations learned from natural scenes to the medical domain. Subsequently, we further enhance volumetric understanding by adding lightweight 3D adapters into the frozen backbone to enforce global inter-slice continuity. Finally, to compensate for the spatial information loss inherent in the embedding process, we design a parallel detail recovery stream to explicitly preserve high-frequency boundary cues. Extensive experiments on five public datasets demonstrate that our approach successfully adapts DINOv3 to the medical domain and significantly outperforms state-of-the-art baselines.

14.
arXiv (quant-ph) 2026-06-12

Candidate overtone shear horizontal SAW resonators in thin-film lithium niobate for intermodal acousto-optic modulation

arXiv:2606.12853v1 Announce Type: cross Abstract: The merits of thin-film surface acoustic wave (SAW) devices are pivotal to develop the high-performance intermodal acousto-optic modulators. In this work, we have proposed shear-horizontal (SH) SAW resonators for anticipated intermodal acousto-optic modulation on the thin-film lithium niobate platform. Through optimization of the cut angle of LN films, the SAW wavelength, and the thickness of interdigital transducer (IDT) electrodes, the calculated acousto-optic overlap factors utilizing SH0 modes are improved by more than an order of magnitude compared with those of Rayleigh modes. Furthermore, we have fabricated and characterized three kinds of proof-of-principle SH0 mode devices without/with grating reflectors. The electromechanical coupling coefficients (keff^2) and quality factors (Q) in the overtone resonators with grating reflectors are systematically evaluated, featuring the highest Q of 843 with the compromised keff^2 of 0.96%-4.72%. The results reveal that the temperature coefficients of frequency (TCF) of Rayleigh modes vary across various overtones, whereas the SH0 modes exhibit TCFs in the range of 32.3-68.9 ppm/C. Our fabricated SH0-mode overtone resonators demonstrate the capability of operating at power levels up to 29 dBm without electrode damage, offering a promising paradigm for robust and high-efficiency intermodal acousto-optic modulators with potential applications in integrated optical signal processing, microwave photonics,and quantum information technologies.

15.
arXiv (quant-ph) 2026-06-11

Expressivity of Quantum Reservoir Computers

arXiv:2501.15528v3 Announce Type: replace Abstract: Using Hamiltonian encoding to inject an input into parameterized quantum circuits (PQCs), the output of the PQC can be written as truncated Fourier series. In recent years, the expressivity of PQCs was established as the number of frequencies contained in this Fourier series. While this concept has also been applied to other quantum machine learning (QML) paradigms, a clear notion of expressivity for temporal information processing with quantum systems is still lacking. Here, we introduce such a notion to the field of quantum reservoir computing (QRC). We analytically derive an expression for the readouts showing that the output of a QRC can be interpreted as a multi-dimensional Fourier series. We give a formula for the growth of expressivity induced by the sequential information injection, which we corroborate with numerical simulations, calculating explicitly the number of multi-dimensional output functions which can be generated from the readouts. Our results show that the specific interplay between system size, input encoding, and memory time gives rise to a boundary on the system size beyond which it is obstructive to further increase the reservoir size in extreme scrambling systems. We propose a recipe for determining this maximal system size for a given QRC setup.

16.
arXiv (CS.CV) 2026-06-16

3D Consistency Optimization for Self-Supervised Monocular Video Depth Estimation

Reliable monocular video depth estimation is crucial for downstream 3D reasoning and embodied AI in endoscopic navigation. However, existing self-supervised approaches typically treat video frames independently or rely on weak temporal regularization. These methods, lacking a holistic perception of the underlying 3D scene, inevitably suffer from geometrically inconsistent predictions and severe cross-frame drift. To address these limitations, we introduce a new paradigm that recasts sequential video depth estimation as an unconstrained multi-view 3D reconstruction problem, enabling full exploitation of the powerful geometric priors embedded in recent 3D foundation models. The core of our approach is a 3D consistency optimization framework driven by three constraints: image-level photometric rendering, explicit world-coordinate geometric alignment, and multi-scale temporal gradient consistency. Such unified optimization elegantly anchors isolated frames to a globally coherent 3D structure. Our method has been validated in both the self-supervised training scenarios and challenging zero-shot clinical environments. Results show that the proposed approach achieves state-of-the-art spatial accuracy, outperforming the frame-based, video-based depth estimators and the multi-view 3D reconstruction baselines.

17.
arXiv (CS.AI) 2026-06-19

PCBSchemaGen: Reward-Guided LLM Code Synthesis for Printed Circuit Boards (PCB) Schematic Design with Structured Verification

arXiv:2602.00510v2 Announce Type: replace Abstract: Most LLM code-synthesis benchmarks rely on unit tests as the reward oracle, but PCB schematic design has none: correctness is defined by structured physical constraints over real IC packages and pin-level assignments, per-task golden references are unavailable, and SPICE simulation does not validate schematic-level correctness. We introduce PCBSchemaGen, a training-free inference-time framework that turns a frozen LLM into a verifiable, repairable PCB schematic generator. The framework induces a domain schema from IC datasheets to ground LLM decoding, pairs it with a deterministic 5-layer continuous-reward verifier with pin-level error localization, and refines candidates through a Thompson Sampling arm-acquiring bandit. We evaluate on 2 PCB benchmarks covering 227 real-IC tasks across 22 unified circuit domains, including a public-schematic-derived suite that serves as a fully held-out generalization test (verifier, KG library, and prompts frozen before any evaluation). Under our framework, an open-weight 31B model (Gemma-4-31B) passes 81.3% of PCBBench tasks on average, and the same framework transfers across both benchmarks with zero verifier code changes; a Circuitron-style inference-time prompting baseline on the same Gemma-4-31B backbone collapses on hard system-level designs. This suggests inference-time refinement under a deterministic structural verifier is a general recipe for reference-free LLM code synthesis in domains without unit-test oracles. Our benchmarks and deterministic verifier are publicly available at https://github.com/HZou9/PCBSchemaGen_v2.

18.
arXiv (CS.AI) 2026-06-15

LEPO: Latent Reasoning Policy Optimization for Large Language Models

arXiv:2604.17892v4 Announce Type: replace-cross Abstract: Recently, latent reasoning has been introduced into large language models (LLMs) to leverage rich information within a continuous space. However, without stochastic sampling, these methods inevitably collapse to deterministic inference, failing to discover diverse reasoning paths. To bridge the gap, we inject controllable stochasticity into latent reasoning via Gumbel-Softmax, restoring LLMs' exploratory capacity and enhancing their compatibility with Reinforcement Learning (RL). Building on this, we propose \underline{L}atent R\underline{e}asoning \underline{P}olicy \underline{O}ptimization~(LEPO), a novel framework that applies RL directly to continuous latent representations. Specifically, in rollout stage, LEPO maintains stochasticity to enable diverse trajectory sampling, while in optimization stage, LEPO constructs a unified gradient estimation for both latent representations and discrete tokens. Extensive experiments show that LEPO significantly outperforms existing RL methods for discrete and latent reasoning.

19.
arXiv (quant-ph) 2026-06-11

Split-Evolution Quantum Phase Estimation for Particle-Conserving Hamiltonians

arXiv:2604.14921v2 Announce Type: replace Abstract: We present a hardware demonstration and resource analysis of split-evolution quantum phase estimation (SE-QPE) on a Quantinuum System Model H2 quantum computer. SE-QPE is a modification to canonical QPE for particle-conserving Hamiltonians in which controlled time evolution is replaced by CSWAP-based interference between a target register and a reference register. For factorizations of time evolution with a shared eigenbasis, SE-QPE preserves the phase-register outcome distribution of canonical QPE and, unlike with compute–uncompute substitutions, it remains compatible with non-exact eigenstates. The substitution removes controlled-simulation overhead and enables parallel evolution on two registers, reducing the depth of each phase-kickback block. Resource analysis for Trotterized double-factorized chemistry Hamiltonians shows that the substitution becomes increasingly favorable at higher phase powers and combining QPE and SE-QPE implementations can be a useful option. Over a range of FeMoco active spaces, SE-QPE reduces time evolution resources, with asymptotic reductions of about 33% in CX count, 25% in $T$ count, and an asymptotic depth ratio of $3/N$ for CX layers. On Quantinuum H2-2, a four-qubit model ethylene demonstration with explicit inverse QFT and repeated phase-kickback steps up to 8 phase bits yields distinct energies and shows the auxiliary registers provide useful error detection filters.

20.
arXiv (CS.CV) 2026-06-15

FBSDiff++: Improved Frequency Band Substitution of Diffusion Features for Efficient and Highly Controllable Text-Driven Image-to-Image Translation

With large-scale text-to-image (T2I) diffusion models achieving significant advancements in open-domain image creation, increasing attention has been focused on their natural extension to the realm of text-driven image-to-image (I2I) translation, where a source image acts as visual guidance to the generated image in addition to the textual guidance provided by the text prompt. We propose FBSDiff, a novel framework adapting off-the-shelf T2I diffusion model into the I2I paradigm from a fresh frequency-domain perspective. Through dynamic frequency band substitution of diffusion features, FBSDiff realizes versatile and highly controllable text-driven I2I in a plug-and-play manner (without need for model training, fine-tuning, or online optimization), allowing appearance-guided, layout-guided, and contour-guided I2I translation by progressively substituting low-frequency band, mid-frequency band, and high-frequency band of latent diffusion features, respectively. In addition, FBSDiff flexibly enables continuous control over I2I correlation intensity simply by tuning the bandwidth of the substituted frequency band. To further promote image translation efficiency, flexibility, and functionality, we propose FBSDiff++ which improves upon FBSDiff mainly in three aspects: (1) accelerate inference speed by a large margin (8.9$\times$ speedup in inference) with refined model architecture; (2) improve the Frequency Band Substitution module to allow for input source images of arbitrary resolution and aspect ratio; (3) extend model functionality to enable localized image manipulation and style-specific content creation with only subtle adjustments to the core method. Extensive qualitative and quantitative experiments verify superiority of FBSDiff++ in I2I translation visual quality, efficiency, versatility, and controllability compared to related advanced approaches.

21.
medRxiv (Medicine) 2026-06-13

Projected population level impact and cost-effectiveness of clinic and community-based tuberculosis screening approaches

The South Africa National Department of Health have set ambitious targets to scale up TB testing, focusing primarily on clinic attendees. In the context of declining funding for TB care and prevention, the most cost-effective approaches for targeting testing should be identified. We developed a mathematical model of TB in South Africa, explicitly incorporating clinic attendance by sex and HIV/ART status. We simulated six screening approaches over 2026-2035 (individually and in combination): three clinic-based (symptom screening, intensified targeted universal TB testing [TUTT, symptom-agnostic sputum testing of clinic attendees in key risk groups], and intensified TUTT allowing saliva samples) and three targeted community-based (community radiographic screening, symptom screening, and universal Xpert Ultra testing), each implemented at a range of coverage levels. Model outputs were combined with a mechanistic cost function to estimate potential impact and cost-effectiveness from a societal perspective. The most cost-effective standalone approach was community radiographic screening at 10% annual population coverage, with an incremental cost-effectiveness ratio (ICER) of $421 per disability-adjusted life year (DALY) averted. 10/11 scenarios along the expansion path included community radiographic screening at progressively higher coverage, combined with a clinic-based approach. Combining complementary approaches to reach both groups at increased risk of TB (e.g. clinic-based screening) and groups with lower screening coverage (e.g. community-based screening) may increase cost-effectiveness of TB screening, compared to standalone approaches. When designing TB screening strategies, both population risk and existing screening coverage should be considered.

22.
arXiv (CS.AI) 2026-06-17

Structural Preservation and the Logical Expressiveness of Graph Neural Networks

arXiv:2606.17882v1 Announce Type: new Abstract: Bridges between graph neural networks (GNNs) and logical formalisms have been established by fixing architectural choices, such as the types of aggregation, combination, and activation functions. These choices define restricted classes of GNNs for which tight correspondences with logical formalisms can be obtained, by showing that logical formulae can be translated into equivalent GNNs and, conversely, that GNNs can be translated into equivalent formulae. In this paper we take a semantic perspective by establishing the logical expressiveness of classes of GNN classifiers that are preserved under structural properties: embeddings (extensions), injective homomorphisms, and homomorphisms. We show that, for each such property, there exists a fragment of graded modal logic characterising the class of GNNs. In particular, preservation under embeddings, injective homomorphisms, and homomorphisms corresponds to existential graded modal logic, its existential-positive fragment, and existential-positive modal logic, respectively. These results characterise the expressiveness of broad classes of GNNs independently of specific architectural choices, but we also show that each of these classes admits a GNN architecture of the same expressiveness. Technically, our approach uses a new well-quasi-order result for trees of bounded height, yielding finite representations of unravelling-invariant classes.

23.
arXiv (CS.AI) 2026-06-17

Vulcan: Instance-specialized, Verifiable Systems Heuristics Through LLM-driven Search

arXiv:2512.25065v2 Announce Type: replace-cross Abstract: Systems resource management tasks rely primarily on hand-designed heuristics. However, growing hardware heterogeneity and workload diversity require heuristics specialized to particular deployment instances, making manual design expensive and difficult to scale. In this paper, we explore how to synthesize systems heuristics using LLMs. The main challenge is ensuring that generated heuristics execute safely, integrate correctly with the surrounding system, and still achieve strong performance. We propose Vulcan, a framework that identifies LLM-friendly interfaces that isolate core decision logic from the rest of the implementation. With Vulcan, LLM-generated code is restricted to simple stateless decision functions, while trusted runtime abstractions provide rich derived statistics for meaningful policy exploration without system-integration bugs. To ensure execution safety, LLMs synthesize heuristics in a restricted language, Anvil, that guarantees important properties by construction. We evaluate Vulcan across three well-studied domains and demonstrate up to 4.9x higher savings for spot-VM scheduling, up to 2x lower miss ratios for cache eviction, and up to 10% higher application performance for tiered-memory systems, while ensuring execution safety throughout.

24.
arXiv (CS.CV) 2026-06-16

SAMTok: Representing Any Mask with Two Words

Pixel-wise capabilities are essential for building interactive intelligent systems. However, pixel-wise multi-modal LLMs (MLLMs) remain difficult to scale due to complex region-level encoders, specialized segmentation decoders, and incompatible training objectives. To address these challenges, we present SAMTok, a discrete mask tokenizer that converts any region mask into two special tokens and reconstructs the mask using these tokens with high fidelity. By treating masks as new language tokens, SAMTok enables base MLLMs (such as the QwenVL series) to learn pixel-wise capabilities through standard next-token prediction and simple reinforcement learning, without architectural modifications and specialized loss design. SAMTok builds on SAM2 and is trained on 209M diverse masks using a mask encoder and residual vector quantizer to produce discrete, compact, and information-rich tokens. With 5M SAMTok-formatted mask understanding and generation data samples, QwenVL-SAMTok attains state-of-the-art or comparable results on region captioning, region VQA, grounded conversation, referring segmentation, scene graph parsing, and multi-round interactive segmentation. We further introduce a textual answer-matching reward that enables efficient reinforcement learning for mask generation, delivering substantial improvements on GRES and GCG benchmarks. Our results demonstrate a scalable and straightforward paradigm for equipping MLLMs with strong pixel-wise capabilities. Our code and models are available.

25.
arXiv (CS.CV) 2026-06-17

Edit3DGS: Unified Framework for Dynamic Head Editing via 2D Instruction-Guided Diffusion and 3D Gaussian Splatting

We present Edit3DGS, a unified framework for dynamic 3D head editing that integrates 2D instruction-guided diffusion with 3D Gaussian splatting. Unlike prior approaches that separately address frame-based edits or static 3D reconstruction, our method couples semantic controllability in the image domain with photorealistic, temporally consistent 3D representations. Given an input video, editable facial regions are masked and modified using a text-conditioned diffusion model to support fine-grained operations such as expression transformation, attribute modification, and appearance refinement. The edited frames are then aggregated through 3D Gaussian splatting to produce a coherent, high-fidelity avatar that preserves both identity and motion dynamics. To enforce consistency, Edit3DGS incorporates multi-view batch editing and lightweight inpainting strategies that recover lost expressions across timesteps. Experimental results demonstrate that our framework enables controllable, artifact-free head editing with smooth temporal transitions, offering practical applications in virtual avatars, immersive communication, film production, and interactive media.