Cell transplant across the tree of life hints at how animals emerged
Embryonic ‘organizer cells’ can tell embryos of various phyla what kind of body to build. Embryonic ‘organizer cells’ can tell embryos of various phyla what kind of body to build.
Academic Intelligence · Curated Daily
AcademicHub 汇聚顶级期刊与预印本平台的实时文献。定制您的专属科研雷达,利用大语言模型自动生成交叉领域文献分析简报。
Embryonic ‘organizer cells’ can tell embryos of various phyla what kind of body to build. Embryonic ‘organizer cells’ can tell embryos of various phyla what kind of body to build.
Glossaries, technical specifications, and system prompts routinely ask language models to use familiar words in unfamiliar ways. When this works, the local rule does not install the new meaning on top of the old one; the pretrained prior keeps operating underneath, and its strength still shows through. We test this with a Stroop-style paradigm: a remapping rule (doctor means forest) pitted against the query word's lexical-prior distractor (hospital), with matched neutral controls. Across 11 open-weight models spanning four families and 1B-9B parameters, lexical-prior strength predicts interference even after item-level controls for answer prior, frequency, tokenization, and prompt wording. Activation patching on five aligned models locates a source-position triplet (definition subject, definition target, query word) that nearly fully recovers the conflict effect (aggregate $R \in [0.92, 1.06]$); a definition-target swap shows the triplet performs binding rather than identity matching. Dissociation experiments isolate target preservation as the binding-specific signature: distractor suppression occurs under matched, swap, and item-mismatched conditions alike, whereas target logit collapse occurs only when the definition-target position is corrupted. Behavior and mechanism converge on the same channel: the prior's strength both predicts which overrides fail and marks where the causal repair lands.
arXiv:2606.17775v1 Announce Type: cross Abstract: Efficient processing of continuous audio streams remains a key challenge for real-time and resource-constrained systems. This paper introduces a neuromorphic trigger for audio event detection, based on a spiking neural network (SNN) that selectively gates input to downstream models. The proposed trigger acts as a low-cost front-end, identifying salient audio segments and forwarding only these to a more computationally intensive model for tasks such as classification. The trigger is implemented as a lightweight fully connected SNN and evaluated on two representative tasks: Anomalous Sound Detection (ASD) and Sound Event Detection (SED). For ASD, the trigger achieves a one-second segment-based F1 score of 0.97 on a class-agnostic form of the URBAN-SED dataset, demonstrating high reliability in identifying relevant audio regions. For SED, the trigger is combined with the Dang classifier on the DCASE 2017 Challenge Task 2 dataset, showing a potential $42.6\times$ reduction in FLOPs while reducing the lower bound of the event-based error rate from 0.41 to 0.25. These results highlight the potential of neuromorphic triggers as real-time, energy-efficient front-end filters, enabling substantial reductions in computational cost.
True general intelligence requires not only a model of the physical world but also a social world model: the capacity to infer how individual mental states interact and crystallize into group-level outcomes. Despite notable progress in individual-level Theory of Mind (ToM) reasoning, existing multimodal large language models fail at this broader task. Collective behavior emerges non-linearly from social tensions, conformity dynamics, and structural constraints, meaning it cannot be recovered by merely summing individual intentions. We present GroupToM-Bench, the first multimodal benchmark for group-level ToM, built around a causal chain spanning micro-level BDI states (belief, desire, intention), meso-level group tension and structural constraints, and macro-level outcome prediction and mechanistic attribution. To probe this full arc, we develop a seven-level cognitive audit framework. Experiments reveal a gap between current models and human baselines, highlighting a failure to process social structures and non-linear collective dynamics.
arXiv:2606.13316v1 Announce Type: new Abstract: Reinforcement Learning with Verifiable Rewards (RLVR) is a central technique for improving long-horizon reasoning in Large Language Models (LLMs). However, existing RLVR methods often encourage unnecessarily long reasoning rollouts, which can degrade reasoning coherence and exhaust the available context budget. Existing approaches to long-context organization often depend on external mechanisms to organize rollouts, rather than enabling the model to manage its own reasoning trajectory. To address this limitation, we propose ReSum, a novel RLVR framework that enables LLMs to compress and organize their reasoning trajectories through self-summarization. Our pilot studies show that self-summarization stabilizes generation by lowering token-level entropy, and that introducing a ``summarization'' phrase can substantially mitigate errors propagated from an incorrect rollout prefix. Motivated by these findings, ReSum adopts a summarization-aware adaptive rollout mechanism that contrastively evaluates whether self-summarization benefits the ongoing reasoning process. Specifically, when the model spontaneously triggers self-summarization, ReSum masks the summarization phrase to create a contrastive branch; for non-summarization positions, it instead randomly injects the phrase to create a matched branch. We further design a summarization-aware advantage to enable finer-grained comparison between contrastive rollout trajectories. Extensive experiments show that ReSum improves performance at an average of 4\% while reducing rollout length by 18.6\%.
Biopharmaceutical manufacturing organizations operate under regulatory frameworks such as FDA guidance, EU Good Manufacturing Practice (GMP), and the EU AI Act, which can restrict the use of cloud-based artificial intelligence systems. Locally deployed large language models (LLMs) offer a privacy-preserving alternative, but their suitability for pharmaceutical manufacturing tasks remains underexplored. This study evaluates four open-source LLMs (Qwen 2.5 Coder 7B, Llama 3.1 8B, Mistral 7B, and Meditron 7B) deployed locally via Ollama for natural-language-to-SQL generation over a pharmaceutical manufacturing database. A FastAPI-based evaluation platform, PharmaBatchDB AI, was developed using a synthetic Microsoft SQL Server database containing approximately 63,000 records across Batch, Manufacturing Execution System (MES), and Clean-In-Place (CIP) modules. Models were benchmarked on 60 domain-specific natural-language questions using metrics including SQL extraction rate, SQL compliance, factual consistency, ROUGE-L, hallucination rate, throughput, and latency. Qwen 2.5 Coder 7B, Llama 3.1 8B, and Mistral 7B generated SQL for all evaluation tasks, while Meditron 7B failed on nearly all tasks due to context-window limitations and poor SQL generation capability. Llama 3.1 8B achieved the highest SQL compliance, whereas Qwen 2.5 Coder 7B achieved the strongest overall text similarity and factual consistency. Performance differences between the two leading models were not statistically significant. The results show that code-tuned general-purpose LLMs outperform a domain-specific biomedical model on structured query generation for pharmaceutical manufacturing data. Although fully local, GxP-aligned NLQ systems are feasible on consumer hardware, current performance levels still require human oversight and downstream validation for regulated use.
arXiv:2606.18272v1 Announce Type: cross Abstract: This paper presents an autonomous agentic resource negotiation framework designed to enable zero-touch network slicing in 6G architectures using Large Language Model (LLM) agents. While LLMs offer powerful reasoning capabilities, we demonstrate that such agents inherently suffer from anchoring bias, rigidly adhering to initial heuristic proposals and causing severe network over-provisioning. To systematically mitigate this cognitive bias, we propose a novel randomized anchoring strategy modeled via a Truncated 3-Parameter Weibull distribution. This mathematically bounded approach seamlessly integrates with burst-aware Digital Twins (DTs) employing Conditional Value at Risk (CVaR) to rigorously guarantee strict Service Level Agreement (SLA) tail-latencies. To validate our methodology, we introduce and prove the Bimodal Constraint-Avoidance Utility Theorem, demonstrating that while feasible negotiations follow classical convex bounds, highly constrained scenarios undergo a phase transition governed by an inverse rational decay envelope. Empirical results generated using a locally hosted 1B-parameter model (\texttt{otel-llm-1b-it}) confirm these dual-regime bounds. Our cognitive de-biasing successfully dismantles rigid negotiation patterns, forcing agents into active exploration to safely ride SLA boundaries and boost system energy savings up to 25\%. Crucially, the lightweight 1B LLM achieves sub-second inference latencies (0.95s mean), ensuring our multi-agent framework is compatible with the operational timescales of the O-RAN non-Real-Time RAN Intelligent Controller (non-RT RIC)\footnote{Our source code is available for non-commercial use at https://github.com/HatimChergui.
arXiv:2606.13796v1 Announce Type: cross Abstract: Recursive training of generative models on their own outputs can lead to model collapse, a compounding drift away from the true data distribution. Existing theoretical works bound finite-round error accumulation in the context of diffusion models, but two questions remain open:~what distribution does the recursion converge to, and how fast? We answer both, isolating a mechanism distinct from imperfect learning: even with perfect score estimation and exact sampling, the early stopping of the reverse diffusion (required for numerical stability) drives a progressive drift away from the data distribution. We prove that this recursion converges geometrically to a unique limiting distribution, which admits a closed-form characterization as an infinite mixture of increasingly Gaussian-smoothed versions of the data distribution. A Hermite spectral decomposition of this limit reveals that recursive training acts as a low-pass filter: higher-order modes, which encode fine non-Gaussian structure, are attenuated much more strongly than coarse modes. This spectral picture motivates annealed truncation schedules that progressively shrink truncation times across retraining rounds; we prove that any schedule converging to $0$ asymptotically eliminates recursive compounding. Finally, we show our idealized characterization is robust: in the presence of discretization and score estimation errors, the learned distribution remains in a Wasserstein-2 ball around the ideal limit, with mode-dependent contraction rates that contract high-order errors faster than low-order ones. We validate the theory on synthetic Gaussian mixtures and CIFAR-10.
arXiv:2507.07156v2 Announce Type: replace-cross Abstract: Supervised machine learning pipelines trained on features derived from persistent homology have been experimentally observed to ignore much of the information contained in a persistence diagram. Computing persistence diagrams is often the most computationally demanding step in such a pipeline, however. To explore this dynamic, we introduce several methods to generate topological feature vectors from unreduced boundary matrices and investigate their theoretical and computational properties. We compared the performance of pipelines trained on vectorizations of unreduced PDs to vectorizations of fully-reduced PDs across several data and task types. Our results indicate that models trained on PDs built from unreduced diagrams can perform on par and even outperform those trained on fully-reduced diagrams on some tasks. We also benchmarked the computational performance of an algorithm for computing unreduced diagrams, which was implemented as a heavily modified version of Ripser. These computations are parallelizable and required an order of magnitude less memory on average compared to computing full persistence diagrams. Our results suggest that machine learning pipelines which incorporate topology-based features may benefit in terms of computational cost and performance by utilizing information contained in unreduced boundary matrices.
arXiv:2606.19658v1 Announce Type: new Abstract: Implicit feedback is widely used in recommender systems due to its accessibility and generality, yet it usually presents noisy samples (e.g., clickbait, position bias). Meanwhile, recommenders inevitably face the item cold-start problem due to the continuous influx of new items. We identify that cold items are more prone to noisy samples due to the aforementioned factors, and researchers often overlook the significance of denoising implicit feedback for cold items. Previous denoising studies usually identify noisy samples based on heuristic patterns, such as higher loss values, and mitigate noise through sample selection or re-weighting. However, these methods have limited adaptability and are ineffective in cold-start scenarios. To achieve denoising implicit feedback for cold-start recommendation, we propose a model-agnostic denoising method called DIF. First, user preferences for content remain stable, which allows us to infer pseudo-labels indicating whether a user is interested in a cold item through content-similar warm items. Furthermore, to improve pseudo-label accuracy, we model the confidence of pseudo-labels based on the content similarity between the cold item and warm items, and then aggregate multiple pseudo-labels for each sample. Finally, we explicitly estimate the uncertainty of the noisy sample label by considering its relative entropy and the cold-start status of the item, which adaptively guides the role of pseudo-labels to correct the noisy labels at the sample level. DIF's superiority is supported by both theoretical justification and extensive experiments on real-world datasets. The method has been deployed on a billion-user scale short video application Kuaishou and has significantly improved various commercial metrics within cold-start scenarios.
arXiv:2605.25711v2 Announce Type: replace-cross Abstract: We study generic $d$-dimensional rigidity in sparse random graphs. Our main result is that for every $d\ge 2$, the Erdős–Rényi random graph $G\sim G(n,c/n)$ undergoes a $d$-rigidity phase transition at the known, explicit, $d$-orientability threshold $c_d$: If $cc_d$, then $G$ is a.a.s. not independent in the generic $d$-rigidity matroid, and we give a sharp asymptotic estimate for its rank. In addition, the $d$-rigidity closure of $G$ has a giant clique of linear size, which contains all but at most $o(n)$ vertices of the $((d+1)+d)$-core of the graph. More generally, we compute, up to a $1+o(1)$ factor, the generic $d$-rigidity rank of random graphs with a given degree distribution. For example, we show that the uniform $n$-vertex $k$-regular graph a.a.s. has rank $\min(k/2,d)n+o(n).$ Our approach is to estimate the rigidity rank of a random graph from its Galton–Watson local weak limit, using a parameter that we call local flexibility.
Four-dimensional computed tomography (4DCT) captures the full respiratory cycle of thoracic anatomy, yet current Internal Target Volume contouring workflows process each phase in isolation, discarding temporal coherence and leaving contours vulnerable to phase-specific artifacts. We present a lightweight framework that applies parameter-efficient fine-tuning to the Segment Anything Model 3 (SAM 3) via low-rank adaptation (LoRA) to align its text-prompted segmentation with the medical domain using only seven annotated 3D CT volumes. Furthermore, the framework incorporates a hard negative mining strategy to improve boundary discrimination in low-contrast thoracic regions. At inference, phase-wise predictions are refined through phase-coherent temporal filtering and spatial connectivity analysis. Since respiratory motion is continuous and periodic, genuine anatomy appears in contiguous blocks of phases, whereas transient artifacts appear sporadically and are thus effectively suppressed. Experiments on pulmonary and cardiac structures yield median Dice scores of 0.968 and 0.910 with 95th-percentile Hausdorff distances of 0.998 mm and 2.931 mm, respectively. The proposed framework effectively eliminates the severe false-positive predictions inherent in the zero-shot inference of the unadapted SAM 3. With only seven annotated volumes, the framework retains over 95% of full-data accuracy, and the entire pipeline is trainable on a single consumer-grade GPU, demonstrating a scalable, data-efficient solution for adaptive radiotherapy.
AI-driven computer vision applications require a profound database to ensure predictable behaviors and performance. Such predictable behaviors are especially important for industrial applications in gaining trust from users. However, such a database is not readily available in industrial applications, and its acquisition is not trivial either. Active learning methods can be applied to ramp up data within a project deployment to iteratively increase the database, and thus the application predictability. Unfortunately, we observe that this often leads to a loss of user trust in the application, which is difficult to regain once lost. This leads to a "chicken-and-egg" dilemma in which neither the database nor the application is developed. In this work, we review state-of-the-art methods and approaches to further boost the database the initial active data ramp-up phase. Here, we focus on recent advancements in GenAI-based data generation and augmentation methods and review their adaptability on an industrial computer vision classification use case. Although we observe a potential for automatic data ramp-up, we also see a domain miss match in between the source (training environment) and target (industrial use-case) - regarding context defined in natural language and object characteristics.
arXiv:2605.14616v2 Announce Type: replace Abstract: Using the multi-index approach to regularity structures due to F. Otto et al., we construct a regularity structure and a model for it associated to the stochastic Langevin equation for the 3D Euclidean Yang-Mills functional. For the model we also obtain global stochastic and global pointwise weighted Besov type estimates which hold almost surely. The model is defined as a limit of a sequence of smooth models introduced with the help of a mollified noise. When the mollification is removed the sequence converges in a certain topology defined with the help of the stochastic estimates. To obtain these results we develop the multi-index approach for systems of equations with vector-valued white noises. This project is motivated by the problem for constructing 3D Euclidean Yang-Mills measure and by the earlier results of the author on the related problem of canonical quantization of the Yang-Mills field on the Minkowski space.
arXiv:2606.13589v1 Announce Type: new Abstract: We present Simplex-Constrained Sparse Bagging (SCSB), a mathematically rigorous framework for post-training compression and probability calibration of bootstrap-based bagging ensembles. Standard bagging ensembles (such as Random Forests, Bagged SVMs, and Bagged Neural Networks) assign uniform voting power to all constituent estimators. However, this naive uniform prior ignores the varying local competence of base estimators and contributes to model overconfidence. We formulate ensemble pruning and calibration as a joint optimization problem over the probability simplex by minimizing the Out-Of-Bag (OOB) loss. To induce sparsity, we address the theoretical "L1-simplex paradox" – the mathematical reality that the L1 norm is constant on the simplex and fails to prune – by introducing a concave quadratic penalty. SCSB is model-agnostic and achieves up to 96% ensemble compression, yielding linear inference speedups and superior probability calibration (lowered Expected Calibration Error) while preserving or enhancing generalization accuracy.
Long Video Question Answering (LVQA) requires identifying sparse, query-relevant evidence within hours-long untrimmed videos. Existing approaches either process videos densely with large vision-language models (VLMs), incurring prohibitive computational cost, or rely on sparse caption-based reasoning, which often misses temporally localized and motion-centric evidence. We introduce TimeProVe, a cost-efficient hybrid framework for temporally grounded reasoning in long videos. TimeProVe first employs lightweight modules to generate action-grounded answer–evidence hypotheses and subsequently invokes an expensive VLM only for targeted verification. The core of our framework lies in the Action-based Candidate Evidence (ACE) module, which converts temporally localized actions into query-conditioned candidate answers and supporting evidence windows through lightweight LLM reasoning. We further introduce OpenTSUBench (OTB), an open-ended benchmark designed to evaluate temporally grounded reasoning in real-world Activities of Daily Living (ADL) scenarios. Experiments show that TimeProVe outperforms the strongest baseline on OTB by 7.3%, while reducing VLM calls by 75% and inference cost by 93%. Furthermore, without explicit temporal grounding training, TimeProVe achieves competitive performance on Charades-STA, and reaches state-of-the-art results when enhanced with grounding VLMs.
arXiv:2606.20087v1 Announce Type: new Abstract: Additive manufacturing process optimization requires precise parameter control to minimize defects such as porosity. Traditional reinforcement learning (RL) approaches using discrete action spaces suffer from slow convergence and susceptibility to local optima, limiting their effectiveness for high-precision manufacturing tasks. This study addresses these limitations by employing a continuous action space combined with a novel architecture that integrates a multi-head attention mechanism with the Soft Actor-Critic (SAC) algorithm. The attention-based feature extractor enhances the agent's ability to capture subtle variations in low-dimensional input features, enabling more effective exploration-exploitation balance for navigating value spaces with local minima. We validate our approach on porosity prediction and process parameter optimization in laser powder bed fusion, demonstrating faster convergence and higher final reward values compared to standard RL methods including DQN, PPO, TD3, and vanilla SAC. The proposed methodology achieves a convergence value of 322.79 within 14 episodes, outperforming existing approaches while maintaining stability throughout training.
arXiv:2511.14007v3 Announce Type: replace-cross Abstract: Artificial intelligence (AI) raises expectations of substantial increases in rates of technological progress, but such anticipations are often not connected to detailed ground-level studies of AI use in innovation processes. Accordingly, it remains unclear how and to what extent AI can accelerate innovation. To help to fill this gap, we explore and assess results from 32 interviews with U.S.-based academic manufacturing and materials sciences researchers experienced with AI and machine learning (ML) techniques. We found that AI was primarily used for modeling of materials and manufacturing processes, facilitating cheaper and more rapid search of design spaces for materials and manufacturing processes alike. Benefits included cost, time, and computation savings in technology development. However, AI/ML tools were unreliable outside design spaces for which dense data were already available; they required skilled and judicious application in tandem with older research techniques; and concerns were raised about the potential to detrimentally circumvent opportunities for disruptive theoretical advancement. Based on these results, we suggest there is reason for optimism about acceleration in sustaining innovations through the use of AI/ML; but that support for conventional empirical, computational, and theoretical research is required to maintain the likelihood of further disruptive advances in manufacturing and materials.
Rewriting source text with large language models (LLMs) before translation has been shown to improve machine translation (MT) quality. However, we find that prompt-based rewriting can degrade translation quality rather than improve it, particularly when smaller LLMs, such as 4B-parameter models, are used. We argue that this limitation stems from the difficulty of controlling rewriting behavior through natural-language prompts alone: a rewrite is useful only if it improves downstream translation, yet existing prompt-based methods do not explicitly optimize for this signal. To address this issue, we propose RLSR (Reinforcement Learning for Source Rewriting), a reinforcement learning framework that trains the rewriting model with a reward based on the downstream translation-quality improvement produced by each rewrite. Experiments across six MT systems and 16 language pairs show that our 4B RLSR-trained rewriting models significantly outperform both the no-rewriting baseline and prompt-based rewriting baselines at the same model scale, while remaining competitive with baselines that use a 235B LLM.
arXiv:2606.14274v1 Announce Type: cross Abstract: Let $E$ be a non-isotrivial elliptic curve over a global function field $\mathbb{F}_q(t)$ of characteristic coprime to $2$ and $3$. Under some explicit conditions, we determine the secondary terms for the first moments of prime Selmer groups of cyclic prime twist families of $E$ over $\mathbb{F}_q(t)$.
arXiv:2606.12480v1 Announce Type: new Abstract: Quantum gates are usually described through matrix and tensor-product formalisms that often obscure their geometric structure. In this work, we formulate the Pauli and Clifford groups within the complex Geometric Algebra (GA) framework. We show that the Pauli group is naturally identified with the group of blades up to a global phase, thereby providing a geometric interpretation of Pauli operators and their commutation relations in terms of oriented subspaces. We further prove that Clifford operators are generated by products of {\pi}/4-Pauli rotors and introduce a greedy Pauli rotor decomposition algorithm whose empirical behavior suggests unexpectedly compact decompositions for Clifford operators. Finally, we show that Clifford+T universality admits a natural geometric interpretation through {\pi}/8-rotors within this framework.
Large language model (LLM) agents have achieved strong performance on a wide range of benchmarks, yet most evaluations assume static environments. In contrast, real-world deployment is inherently dynamic, requiring agents to continually align their knowledge, skills, and behavior with changing environments and updated task conditions. To address this gap, we introduce EvoArena, a benchmark suite that models environment changes as sequences of progressive updates across terminal, software, and social domains. We further propose EvoMem, a patch-based memory paradigm that records memory evolution as structured update histories, enabling agents to reason about environmental evolution through changes in their memory. Experiments show that current agents struggle on EvoArena, achieving an average accuracy of 39.6% across evolving terminal, software, and social-preference domains. EvoMem consistently improves performance, yielding an average gain of 1.5% on EvoArena and also improving standard benchmarks such as GAIA and LoCoMo by 6.1% and 4.8%. Beyond individual tasks, EvoMem further improves chain-level accuracy by 3.7% on EvoArena, where success requires completing a consecutive sequence of related evolutionary subtasks. Mechanistic analysis shows that EvoMem improves evidence capture in the memory, indicating better preservation of complete evolving environment states. Our results highlight the importance of modeling evolution in both evaluation and memory for reliable agent deployment.
Continual learning (CL) seeks to mitigate catastrophic forgetting when models are trained with sequential tasks. A common approach, experience replay (ER), stores past exemplars but only sparsely approximates the data distribution, yielding fragile and oversimplified decision boundaries. We address this limitation by introducing Support Boundary Data (SBD), generated via differential-privacy-inspired noise into latent features to create boundary-adjacent representations that implicitly regularize decision boundaries. Building on this idea, we propose Experience Blending (EB), a framework that jointly trains on exemplars and SBD through a dual-model aggregation strategy. EB has two components: (1) latent-space noise injection to generate support boundary data, and (2) end-to-end training that jointly leverages exemplars and SBD. Unlike standard experience replay, SBD enriches the feature space near decision boundaries, leading to more stable and robust continual learning. Extensive experiments on CIFAR-10, CIFAR-100, Tiny ImageNet, and ImageNet1K demonstrate consistent accuracy improvements of 10%, 6%, 13%, 2%, respectively.
Learning to simulate human users in interactive settings could advance the training of agent assistants, evaluation of personalization systems, research in the social sciences, and more. Existing approaches generally do so by training a large language model (LLM) to match a single ground truth response, either by maximizing the log probability or by using a similarity reward. We instead propose {Turing-RL}: a Turing-Test-based reinforcement learning approach for training user simulator models. {Turing-RL} uses a discriminative Turing reward with an LLM judge to score how indistinguishable a generated response is from the real user's given the user's history, and the user simulator LLM learns to produce responses indistinguishable from what the user could have said with such rewards. Across two different domains–conversational chat and Reddit forum discussion–we find that {Turing-RL} consistently outperforms baseline methods on both LLM and human evaluation metrics. Our study suggests that optimizing for indistinguishability, rather than response matching, is effective for learning user simulators.
arXiv:2604.04342v2 Announce Type: replace Abstract: Many data-driven decision problems are formulated using a nominal distribution estimated from historical data, while performance is ultimately determined by a deployment distribution that may be shifted, context-dependent, partially observed, or stress-induced. This tutorial presents modern generative models, particularly flow- and score-based methods, as mathematical tools for constructing decision-relevant distributions. From an operations research perspective, their primary value lies not in unconstrained sample synthesis but in representing and transforming distributions through transport maps, velocity fields, score fields, and guided stochastic dynamics. We present a unified framework based on pushforward maps, continuity, Fokker-Planck equations, Wasserstein geometry, and optimization in probability space. Within this framework, generative models can be used to learn nominal uncertainty, construct stressed or least-favorable distributions for robustness, and produce conditional or posterior distributions under side information and partial observation. We also highlight representative theoretical guarantees, including forward-reverse convergence for iterative flow models, first-order minimax analysis in transport-map space, and error-transfer bounds for posterior sampling with generative priors. The tutorial provides a principled introduction to using generative models for scenario generation, robust decision-making, uncertainty quantification, and related problems under distributional shift.