Academic Intelligence · Curated Daily

探索全球前沿学术脉络

AcademicHub 汇聚顶级期刊与预印本平台的实时文献。定制您的专属科研雷达,利用大语言模型自动生成交叉领域文献分析简报。

01.
arXiv (CS.LG) 2026-06-17

Searching Neural Architectures for Sensor Nodes on IoT Gateways

arXiv:2505.23939v2 Announce Type: replace Abstract: This paper presents an automatic method for the design of Neural Networks (NNs) at the edge, enabling Machine Learning (ML) access even in privacy-sensitive Internet of Things (IoT) applications. The proposed method runs on IoT gateways and designs NNs for connected sensor nodes without sharing the collected data outside the local network, keeping the data in the site of collection. This approach has the potential to enable ML for Healthcare Internet of Things (HIoT) and Industrial Internet of Things (IIoT), designing hardware-friendly and custom NNs at the edge for personalized healthcare and advanced industrial services such as quality control, predictive maintenance, or fault diagnosis. By preventing data from being disclosed to cloud services, this method safeguards sensitive information, including industrial secrets and personal data. The outcomes of a thorough experimental session confirm that – on the Visual Wake Words dataset – the proposed approach can achieve state-of-the-art results by exploiting a search procedure that runs in less than 10 hours on the Raspberry Pi Zero 2.

02.
arXiv (CS.CV) 2026-06-16

RefGC-SR$^2$: Reference-guided Generated Content Super-Resolution and Refinement

Reference-guided generation (e.g., object compositing, customization) has progressed rapidly, yet current pipelines share a fundamental limitation: the object-centric high-resolution reference image (HRRI) provided by users is downsampled to a fixed low-resolution (LR) before being fed into the model, so the fine-grained details are discarded before the output is even produced. In addition, the generation step then introduces its own artifacts (e.g., identity distortion) on top of this loss. Existing reference-guided generated content refinement (RefGCR) methods can correct some of these artifacts but still operate in the LR domain; reference-guided super-resolution (RefSR) methods recover resolution but assume natural-image degradations and ignore the artifact distribution of generative pipelines. To address both gaps in a single formulation, we introduce a new task: reference-guided generated content super-resolution-refinement (RefGC-SR$^2$), where the original HRRI is reused at the post-processing stage to recover lost details, refine generative artifacts, and upscale the output simultaneously. We construct the first real-world triplet data generation pipeline for this RefGC-SR$^2$ task, training a diptych-conditioned generator to synthesize paired low-quality anchors that public pretrained models cannot provide. We further present a frequency-aware diffusion transformer model for RefGC-SR$^2$ that selectively injects fine details from the HRRI while removing generative artifacts. Extensive experiments demonstrate that our RefGC-SR$^2$ model successfully (i) refines the object identity faithfully with respect to the reference, and (ii) recovers high-resolution details, so that the final result is significantly higher quality and practically more usable compared to existing RefGCR and RefSR baselines.

03.
arXiv (CS.CL) 2026-06-15

Non-Parametric Machine Text Detection via Multi-View Gaussian Processes

Adversarial conditions such as paraphrasing and targeted style transfer sharply degrade the accuracy of machine text detectors. A document, however, carries multiple complementary signals (e.g., stylistic features, likelihood and rank-order features, and structural features), and an attack that suppresses one may leave others intact. While a parametric classifier can learn to combine these features given sufficient supervision, classifiers are prone to making confidently incorrect predictions when the distribution shifts (e.g., novel attacks or unseen language models). To address this, we propose a multi-view, non-parametric detection framework that extracts complementary feature views from the same document and aggregates per-view evidence through a Gaussian process ensemble. By aggregating evidence across views, an adversary must simultaneously defeat multiple independent axes of detection, substantially raising the cost of evasion. The Gaussian process formulation additionally provides calibrated probabilities and principled abstention on out-of-distribution inputs, supporting reliable deployment in high-stakes settings. We evaluate on three benchmarks spanning diverse generators and attacks: the DetectRL and RAID benchmarks, and the PAN2025 shared task and demonstrate that our multi-view detector maintains strong performance under the considered attacks, outperforming existing approaches against held out attacks.

04.
arXiv (quant-ph) 2026-06-15

Certifying Macroscopic Quantum Mechanics via Hypothesis Testing with Finite Data

arXiv:2506.22092v2 Announce Type: replace Abstract: We address the challenge of certifying quantum behavior with single macroscopic massive particles, subject to decoherence and finite data. We propose a hypothesis testing framework that distinguishes between classical and quantum mechanics based on position measurements. While interference pattern visibility in single-particle quantum superposition experiments has been commonly used as a sufficient criterion to falsify classical mechanics, we show that, from a hypothesis testing perspective, it is neither necessary nor efficient. Focusing on recent proposals to prepare macroscopic superposition states of levitated nanoparticles, we show that the likelihood ratio test – which leverages differences across the entire probability distribution – provides an exponential reduction in measurements needed to reach a given confidence level. These results generalize to a broad class of quantum states, and offer a principled, efficient method to falsify classical mechanics in interference experiments, relaxing the experimental constraints faced by current efforts to test quantum mechanics at the macroscopic scale.

05.
arXiv (CS.AI) 2026-06-15

When the Tool Decides: LLM Agents Defer Blindly to Graph Neural Network Tools, and Stronger Backbones Defer More

arXiv:2606.14476v1 Announce Type: new Abstract: A growing line of work equips large language model (LLM) agents with graph neural networks (GNNs) as callable tools, assuming the agent exercises judgment over when and how much to rely on such a tool. We test this directly. We expose a frozen GNN to a ReAct-style LLM agent as an explicit tool and measure, on node classification over a text-attributed graph (ogbn-arxiv, replicated on WikiCS), whether the agent uses the tool or merely obeys it. We find the agent does not exercise judgment: its predictions agree with the raw GNN's 97.6-99.2% of the time (5 seeds), collapsing into a GNN parrot that adopts the tool's output wholesale and bypasses its own reasoning. Sweeping backbone capability (Qwen2.5 0.5B-7B), the deference is not a weak-model artifact: among models able to invoke the tool, agreement rises with capability (0.60 to 0.98 from 1.5B to 7B). Crucially, the cost of deference does not shrink as capability grows and grows where alternatives emerge: a per-node oracle over the available actions beats the parrot by 0.09-0.18 at 3B and 0.12-0.22 at 7B, roughly doubling at high homophily, because the parrot is pinned to the frozen GNN while the agent's alternatives improve; at 7B a simple neighbour-label tool overtakes the GNN at high homophily (0.81 vs 0.71) yet the agent still defers. A simple selective-invocation gate recovers about half of that high-homophily gap (0.71 to 0.83) but yields no net global gain, and held-out estimates bound the best achievable gate over standard test-time features to at most a third of the oracle headroom: reliable selective invocation looks limited by available information, not merely router design. Our results are a cautionary measurement: evaluations of agent+tool systems cannot assume the agent adds judgment on top of the tool, and selective invocation must be designed in rather than expected to emerge from scale.

06.
arXiv (CS.LG) 2026-06-16

A Spatio-Temporal Expert Prefetching Framework for Efficient MoE-based LLM Inference

arXiv:2606.15453v1 Announce Type: cross Abstract: Mixture-of-Experts (MoE) based large language models (LLMs), such as Qwen and DeepSeek, have recently emerged as an effective approach to improving model capacity without proportionally increasing computational cost. By replacing the conventional feed-forward network in dense LLMs with a set of experts and activating only a subset of them for each input token, MoE models significantly increase the total number of parameters while keeping the per-token computation relatively manageable. However, this dynamic and irregular expert activation pattern also introduces substantial expert loading overhead during inference, since the required experts must be fetched on demand according to token-dependent routing results. As a result, expert loading latency becomes a major source of performance and energy inefficiency. To this end, we first perform a comprehensive analysis of expert selection behavior in various MoE-based LLMs and applications, including language understanding and code generation. Our analysis reveals that, within each application domain, expert requests exhibit strong correlation across both adjacent MoE layers and consecutive decoding tokens, making future expert activations predictable. Based on this insight, we propose ST-MoE, a spatio-temporal expert prefetching framework that proactively stages experts ahead of use to overlap expert loading with ongoing computation. ST-MoE combines a lightweight runtime prediction mechanism that preserves the original routing behavior with a reconfigurable hardware design that efficiently supports dynamic expert prefetching. The combined effect of the prediction mechanism with the supporting hardware significantly improves MoE inference performance and energy efficiency while preserving model inference accuracy.

08.
arXiv (CS.AI) 2026-06-18

A Reproducible Log-Driven AutoML Framework for Interpretable Pipeline Optimization in Healthcare Risk Prediction

arXiv:2605.21528v2 Announce Type: replace-cross Abstract: Accurate disease risk prediction is challenged by heterogeneous features, limited data, and class imbalance. This study presents yvsoucom-iterkit, a deterministic AutoML framework that models pipeline optimization as a configuration-level system with full reproducibility and traceable execution logs, enabling systematic analysis of component attribution, interactions, similarity, and cross-seed robustness. Experiments on the Pima Indians Diabetes and Stroke datasets across more than 18,000 pipeline configurations reveal a structured yet partially redundant search space, where performance is dominated by a small subset of interacting components. Ensemble models achieve stable performance, reaching a Weighted-F1 of 0.89 on Pima and 0.94 on Stroke. Macro-F1 reaches approximately 0.88 on Pima but drops to 0.6560 on Stroke due to severe imbalance. Cross-seed experiments show that ensembles reduce variance compared to single models. Friedman testing ($p < 0.05$) confirms significant ranking differences across configurations. Based on analysis of component attribution, interaction, and similarity, optimal configuration design reveals dataset-dependent behavior. For the Pima dataset, computational efficiency benefits from simplified search spaces where redundant components can be removed, with split ratio playing a key role. In contrast, the Stroke dataset requires enhanced imbalance-aware strategies, where RandomOverSampler improves Macro-F1 from 0.6560 to 0.6766. These findings demonstrate that effective AutoML optimization is achieved through optimal configuration design, where carefully constraining the search space to high-impact components can improve performance, stability, and interpretability while reducing unnecessary search complexity.

09.
arXiv (CS.AI) 2026-06-12

Interaction-Centered Intelligence: Toward an Interaction-Based Theory of Human-AI Co-Creation

arXiv:2606.00807v2 Announce Type: replace Abstract: Traditional artificial intelligence has largely conceptualized intelligence as isolated computation occurring within bounded agents. Across classical AI, machine learning, and many generative systems, the dominant unit of analysis remains the individual model or autonomous system evaluated through outputs, benchmarks, prediction accuracy, or optimization performance. While these approaches have produced major advances, they often under-theorize the role of interaction in the emergence of intelligence, creativity, meaning, and adaptive behavior. This paper proposes interaction as the primary unit of analysis for co-creative AI and interaction-centered intelligence more broadly. Drawing from distributed cognition, embodied cognition, enaction, participatory sense-making, human-computer interaction, and computational creativity, the paper traces a historical progression toward increasingly relational accounts of intelligence. Building upon prior work in Creative Sense-Making, quantified co-creation, and co-creative systems such as the Drawing Apprentice and AI Drawing Partner, it argues that intelligence emerges through evolving interaction dynamics among agents, environments, and socio-technical systems rather than solely through internal computation. The paper introduces Interaction-Centered Intelligence as a framework for understanding human-AI co-creation, collaborative emergence, adaptive participation, and interactional dynamics. Rather than evaluating intelligence solely through generated outputs, the framework emphasizes interaction trajectories, coordination patterns, participatory engagement, adaptive regulation, and interactional drift unfolding through time. Implications for explainable co-creative AI, hybrid intelligence, enactive AI, and future human-AI systems are discussed.

10.
bioRxiv (Bioinfo) 2026-06-16

FlowBench: separating planning, fault recovery and interpretation in agentic bioinformatics

Agentic large language model (LLM) systems are being deployed in bioinformatics faster than they are understood, and single-metric evaluations conflate capabilities that fail independently. We introduce FlowBench, a benchmark that decomposes agentic bioinformatics performance into planning, fault recovery, biological interpretation, and end-to-end output-fidelity. Existing systems achieve high plan completeness, but their closed, single-provider designs prevent attribution of performance to scaffolding versus the underlying model. We therefore built FlowAgent, a modular, provider-agnostic framework whose components can be selectively disabled and whose backbone model can be swapped across providers on a shared harness, and used it to evaluate 23 models from three main providers. Three findings emerge. First, generating a valid workflow plan from a named toolchain is largely solved, whereas inferring an appropriate toolchain from biological intent alone is uniformly difficult regardless of model tier, compressing all models into a narrow 44-57% pass-rate band. Second, ablation shows that the dependency-structured plan and a completeness-reflection step drive performance, while adding a same-context validator-driven retry makes structural quality worse. Third, fault recovery and data-grounded interpretation remain unsolved. Models frequently propose fixes that force a clean exit while leaving the underlying data invalid, and data-grounded interpretation lags internal-knowledge recall by a consistent margin. Safety does not emerge from capability, and reasoning-tier models were among the least reliable at recognising unrecoverable faults. Once planning saturates, agent architecture and refusal calibration, not model scale, are the productive frontier.

11.
arXiv (CS.AI) 2026-06-19

FundaPod: A Multi-Persona Agent Pod Platform with Knowledge Graph Memory for AI-Assisted Fundamental Investment Research

arXiv:2605.27864v4 Announce Type: replace Abstract: Large language models (LLMs) are increasingly applied in finance, yet most existing work emphasizes trading signals or financial NLP tasks centered on prediction. Institutional fundamental research, by contrast, requires human analysts or AI agents to gather evidence, identify business drivers, compare competing viewpoints, and generate investment memos. Its broader goal is not merely to predict outcomes, but to produce investment plans that are transparent, reusable, and verifiable, while contributing to the cumulative development of investment knowledge. We present FundaPod, a multi-persona agent platform for AI-assisted fundamental investment research. We argue that fundamental research is a human-centric decision-support task that is qualitatively distinct from trading-signal generation, and is therefore better served by an independence-preserving architecture. In FundaPod, AI agents with different personas, such as value investors or macro strategists, conduct research independently under a shared provenance contract. Their disagreements are then surfaced post hoc for adjudication by the human portfolio manager (PM) through a knowledge-graph memory system. This paper contributes five design principles for human-AI hybrid systems supporting fundamental research, grounded in design-science practice and theories of cognitive isolation and human-machine coordination. It also describes four architectural mechanisms: a persona distillation pipeline that turns public investor materials into deployable agents; a declarative skill registry that lets the planner derive typed task graphs; a grounded evidence model that links memo claims to verifiable sources; and a knowledge-graph "second brain" that connects tickers, memos, analysts, and themes. We demonstrate the architecture through a complete case study and a persona-based memo comparison.

12.
bioRxiv (Bioinfo) 2026-06-16

OmicOS: A Comprehensive Omics Ecosystem Infrastructure and Agent System for the AI Era

Biology has accumulated a vast ecosystem of omics methods, but much of this ecosystem remains built for expert humans rather than scientific agents. Methods are scattered across Python packages, R/Bioconductor and CRAN workflows, command-line tools, incompatible data containers and implicit object states, making even routine analyses difficult for an AI system to choose, execute and verify reliably. Here we introduce OmicOS, a comprehensive omics ecosystem infrastructure and agent system that turns OmicVerse V2, an open-source omics community, into an executable foundation for agentic biology. OmicVerse V2 provides the community substrate: scalable AnnDataOOM-compatible rust backends, agent-friendly Python algorithms for single-cell, spatial, bulk and multi-omics analysis, interfaces to single-cell foundation models, and Python-native reconstructions of historically R-centred Bioconductor/CRAN-style workflows. OmicOS makes this substrate actionable by registering analytical functions as state-aware capability contracts, allowing agents to inspect live data objects, select valid methods, execute controlled workflows and record provenance. The result is not a fixed pipeline, but a programmable omics environment in which agents compose real analyses from verified community methods rather than inventing tools. Across external and purpose-built benchmarks, OmicOS ranked first among the evaluated systems, reaching 81.2% on BiomniBench. Adding OmicVerse to a minimal agent improved task completion by up to 34.2 percentage points with qwen-3.6-35b, and controlled ablations showed that the gains came from registry-grounded execution rather than from larger models, documentation retrieval or unrestricted tool exposure. The same infrastructure scaled to atlas-sized data, reproduced R-centred workflows in Python and converted external pathology software into agent-usable skills. In a discovery task starting from a whole-body spatial map and the term Alzheimer disease, OmicOS composed a non-canonical workflow that integrated spatial expression, genetic association, eQTL and colocalization evidence to nominate a colon epithelial risk axis centred on PICALM, CD2AP and CR1. Together, OmicVerse and OmicOS define an open foundation for AI-era omics, showing how a community of biological methods can be transformed into a reliable, extensible and agent-operable system for discovery.

13.
medRxiv (Medicine) 2026-06-10

Resolving Diagnostic Discordance in Group 2 Pulmonary Hypertension Through Staged Physiologic Testing: Insights From PVDOMICS

Background World Symposium on Pulmonary Hypertension (WSPH) Group 2 pulmonary hypertension (PH) is a clinically integrated phenotype attributed to left heart disease, whereas pre- versus post-capillary classification is operationalized primarily by pulmonary capillary wedge pressure (PCWP). Although current recommendations emphasize contextual interpretation and provocative testing for intermediate PCWP values, the relationship between PCWP-based classification and underlying phenotype has not been systematically evaluated. We aim to quantify phenotype-hemodynamic discordance across the PCWP spectrum and evaluate a staged physiology-guided framework incorporating inhaled nitric oxide (iNO), ventricular geometry, and provocative testing. Methods We studied 1,032 participants from the NHLBI-sponsored PVDOMICS cohort with multidisciplinary adjudicated phenotypes integrating clinical, imaging, physiologic, and hemodynamic data. Stage-specific PCWP thresholds classified pre- versus post-capillary physiology at rest, during iNO, and during provocation (fluid challenge or invasive cardiopulmonary exercise testing [iCPET]). Echocardiographic right ventricular-to-left ventricular (RV/LV) ratio was evaluated as a marker of ventricular interdependence. Restricted cubic spline and staged concordance analyses defined certainty-based PCWP ranges and incremental diagnostic yield. Results Adjudicated Group 2 phenotype was present in 37.0% of participants. Resting PCWP demonstrated good discrimination (AUC 0.86), but substantial bidirectional phenotype-hemodynamic discordance persisted across intermediate PCWP ranges. At a resting PCWP of 12 mmHg, 25% of participants classified as pre-capillary had adjudicated Group 2 PH, whereas at 18 mmHg, 35% classified as post-capillary remained discordant non-Group 2. Concordance did not approach 90% until PCWP values were 24 mmHg. Dynamic testing incrementally improved concordance within these overlap zones. Nearly half of adjudicated Group 2 PH participants (46.5%) were not identified by resting PCWP alone; incorporation of iNO and provocative testing increased cumulative Group 2 identification by 63.4% and improved sensitivity from 79.9% to 83.7%. Model discrimination improved from an AUC of 0.863 to 0.908 (likelihood-ratio P

14.
arXiv (CS.CV) 2026-06-17

Visuals Lie, Consistency Speaks: Disentangling Spatial Attention from Reliability in Vision-Language Models

Multimodal Foundation Models are increasingly used as reasoning agents, making reliability, knowing when a model may hallucinate, critical. A common intuition, which we call the Attention-Confidence Assumption, holds that reliability follows from "structural" visual perception: tight attention on relevant regions should signal a trustworthy answer, while scattered attention signals confusion. We challenge this through the VLM Reliability Probe (VRP), a systematic cross-family study of reliability signals in contemporary Vision-Language Models (VLMs). We introduce structural-attention metrics, cluster counts (C_k) and spatial entropy (H_s), to quantify the visual encoder's gaze, and track its evolution (Delta H_s) across layers. This reveals a "Symbolic Detachment": models often "Early Lock" visual features only to diffuse attention later, severing early perception from final generation. Contrary to the grounding hypothesis, we find a "Cluster Failure": spatial attention has near-zero correlation (R approx 0.001) with accuracy. Instead, reliability is a phenomenon of generation dynamics and internal-state distributions. Self-Consistency, the agreement rate across sampled reasoning paths, is the dominant predictor of truth (R = 0.429). Scaling causal interventions exposes a sharp architectural divergence: LLaVA locks its prediction in a fragile late-stage bottleneck, whereas PaliGemma and Qwen2-VL distribute reliability globally, staying resilient even when ~50% or more of their most predictive layer is destroyed. For current VLMs, reliability signals are detached from visual grounding maps and are best inferred from generation-time dynamics and hidden-state probes.

15.
arXiv (quant-ph) 2026-06-11

Unifying framework for quantum simulation algorithms for time-dependent Hamiltonian dynamics

arXiv:2411.03180v2 Announce Type: replace Abstract: Recently, there has been growing interest in simulating time-dependent Hamiltonians using quantum algorithms, driven by diverse applications, such as quantum adiabatic computing. While techniques for simulating time-independent Hamiltonian dynamics are well-established, time-dependent Hamiltonian dynamics is less explored and it is unclear how to systematically organize existing methods and to find new methods. Sambe-Howland's continuous clock elegantly transforms time-dependent Hamiltonian dynamics into time-independent Hamiltonian dynamics, which means that by taking different discretizations, existing methods for time-independent Hamiltonian dynamics can be exploited for time-dependent dynamics. In this work, we systemically investigate how Sambe-Howland's clock can serve as a unifying framework for simulating time-dependent Hamiltonian dynamics. Firstly, we demonstrate the versatility of this approach by showcasing its compatibility with analog quantum computing and digital quantum computing. Secondly, for digital quantum computers, we illustrate how this framework, combined with time-independent methods (e.g., product formulas, multi-product formulas, qDrift, and LCU-Taylor), can facilitate the development of efficient algorithms for simulating time-dependent dynamics. This framework allows us to (a) resolve the problem of finding minimum-gate time-dependent product formulas; (b) establish a unified picture of both Suzuki's and Huyghebaert and De Raedt's approaches; (c) generalize Huyghebaert and De Raedt's first and second-order formula to arbitrary orders; (d) answer an unsolved question in establishing time-dependent multi-product formulas; (e) and recover continuous qDrift on the same footing as time-independent qDrift. Thirdly, we demonstrate the efficacy of our newly developed higher-order Huyghebaert and De Raedt's algorithm through digital adiabatic simulation.

16.
arXiv (CS.CV) 2026-06-12

QueryOcc: Query-based Self-Supervision for 3D Semantic Occupancy

Learning 3D scene geometry and semantics from images is a core challenge in computer vision and a key capability for autonomous driving. Since large-scale 3D annotation is prohibitively expensive, recent work explores self-supervised learning directly from sensor data without manual labels. Existing approaches either rely on 2D rendering consistency, where 3D structure emerges only implicitly, or on discretized voxel grids from accumulated lidar point clouds, limiting spatial precision and scalability. We introduce QueryOcc, a query-based self-supervised framework that learns continuous 3D semantic occupancy directly through independent 4D spatio-temporal queries sampled across adjacent frames. The framework supports supervision from either pseudo-point clouds derived from vision foundation models or raw lidar data. To enable long-range supervision and reasoning under constant memory, we introduce a contractive scene representation that preserves near-field detail while smoothly compressing distant regions. QueryOcc surpasses previous camera-based methods by 26% in semantic RayIoU on the self-supervised Occ3D-nuScenes benchmark while running at 11.6 FPS, demonstrating that direct 4D query supervision enables strong self-supervised occupancy learning. https://research.zenseact.com/publications/queryocc/

17.
arXiv (CS.CL) 2026-06-16

SING: Synthetic Intention Graph for Scalable Active Tool Discovery in LLM Agents

Large language model (LLM) agents increasingly rely on agent harnesses that manage context, tools, and multi-turn execution, making tools a central interface for acting in realistic digital environments. As harness-connected tool ecosystems expand to hundreds or thousands of APIs, services, and task-specific skills, exhaustive tool schema injection becomes costly and imposes a closed-world assumption that limits agents to a predefined static inventory. Retrieval-augmented tool selection offers a natural alternative, but existing one-shot retrieval methods often fail to align isolated tool descriptions with the agent's true task intention, especially in long-horizon tasks where required capabilities emerge through decomposition, observations, and newly induced subgoals. We propose SING, an intention-aware active tool discovery framework that builds an intention-tool graph linking user intentions, tool capabilities, and tool collaboration patterns, and dynamically retrieves tools according to evolving task states. Using a unified corpus of 7,471 tools, we evaluate SING on three real-world tool-use benchmarks. SING improves Global Recall@5 by up to 59.8% and downstream success rate by up to 28.9% over baselines, while reducing full-corpus tool-schema exposure by 99.8%, demonstrating that intention-aware graph structure enables more accurate and context-efficient tool discovery in large-scale agentic ecosystems.

18.
arXiv (CS.CL) 2026-06-18

LLMs Struggle to Measure What Distinguishes Students of Different Proficiency Levels: A Study of Item Discrimination in Reading Comprehension Assessment

Item discrimination is a fundamental psychometric property of educational assessment, which measures whether an item meaningfully distinguishes students with higher proficiency from students with lower proficiency. While various existing works have explored whether large language models (LLMs) can estimate item difficulty, it remains unclear whether they can capture item discrimination. In this work, we evaluate 42 proprietary and open-weight LLMs in zero-shot settings using two complementary approaches: direct discrimination prediction, where models explicitly estimate an item's discrimination value from its content, and response-based Classical Test Theory (CTT) calibration, where LLM answers are treated as synthetic student responses to compute discrimination scores. Our results show that direct prediction yields weak alignment with human-calibrated discrimination: the best-performing model reaches only a Spearman correlation of 0.152. Response-based CTT calibration provides a stronger but still limited signal, with the all-persona synthetic respondent pool reaching a Spearman correlation of 0.241. These findings highlight item discrimination as an open challenge for LLM-based psychometric evaluation: current LLMs contain non-random discrimination-relevant signal, but they do not yet reliably capture how assessment items distinguish human students.

19.
arXiv (CS.AI) 2026-06-18

Generative-Model Predictive Planning for Navigation in Partially Observable Environments

arXiv:2606.18888v1 Announce Type: new Abstract: Navigation in partially observable environments presents a significant challenge for autonomous agents, requiring effective decision-making with limited sensory information in unknown environments. Belief-based methods, particularly those using neural networks to approximate the belief space, often fail to capture the inherent multimodality of belief spaces, especially in high-dimensional cases with perceptual aliasing. While generative models present a compelling alternative, they typically require substantial data or expert demonstrations and lack explicit mechanisms for long-term planning. In this paper, we introduce BeliefDiffusion, a novel framework that combines the benefits of both generation and planning. BeliefDiffusion leverages diffusion models to explicitly characterize multimodal belief distributions and utilizes Model Predictive Control (MPC) to simultaneously plan ahead. It consists of two steps: (1) Imagining plausible environment configurations based on observation history and (2) Planning efficient navigation strategies across an aggregated configurations. Through extensive experiments in synthetic map environments, we demonstrate that BeliefDiffusion significantly outperforms both model-free reinforcement learning baselines and other generative approaches in navigation success rate and path efficiency. Our results validate that explicitly incorporating multimodal belief representations into planning enables more robust navigation in partially observable settings.

20.
arXiv (CS.CV) 2026-06-18

Cosmos 3: Omnimodal World Models for Physical AI

We introduce Cosmos 3, a family of omnimodal world models designed to jointly process and generate language, image, video, audio, and action sequences within a unified mixture-of-transformers architecture. By supporting highly flexible input-output configurations, Cosmos 3 seamlessly unifies critical modalities for Physical AI – effectively subsuming vision-language models, video generators, world simulators, and world-action models into a single framework. Our evaluation demonstrates that Cosmos 3 establishes a new state-of-the-art across a diverse suite of understanding and generation tasks, demonstrating omnimodal world models as scalable, general-purpose backbones for embodied agents. Our post-trained Cosmos 3 models were ranked as the best open-source Text-to-Image and Image-to-Video models by Artificial Analysis, and the best policy model by RoboArena at the time the technical report was written. To accelerate open research and deployment in Physical AI, we make our code, model checkpoints, curated synthetic datasets, and evaluation benchmark available under the Linux Foundation's OpenMDW-1.1 License at https://github.com/nvidia/cosmos and https://huggingface.co/collections/nvidia/cosmos3. The project website is available at https://research.nvidia.com/labs/cosmos-lab/cosmos3.

21.
medRxiv (Medicine) 2026-06-17

Accounting for Human Movement to Improve Exposure-Health Models

Background. Current exposure-health models rely on averaged, residential-based environmental exposures, failing to account for human movement. This aggregation can lead to exposure misclassification and biased exposure-response estimates, potentially distorting our understanding of the true health effects of environmental conditions. We developed exposure disaggregation regression models that explicitly account for human movement when linking environmental exposures to health outcomes. Methods. By weighting pixel-level exposures according to distance from home as a simple proxy for human movement, our model linked disaggregated environmental exposures to individual-level health outcomes. Weights were either fixed a priori or derived from a latent distance-decay power parameter learned from the data. We additionally evaluated model performance under a nonlinear exposure-response relationship. Model performance was assessed across multiple sample sizes (N = 1,114; 50,000; and 100,000). A simulation study examined parameter recovery using bias, empirical standard error (EmpSE), and credible interval coverage. As a case study, Demographic and Health Surveys (DHS) data from Albania were used to link acute respiratory infection (ARI) outcomes among children under five to pixel-level NDVI within a 3 km buffer around DHS cluster centroids, and the proposed models were applied to these data. Results. Across all models (fixed-weight, learned-weight, and restricted cubic spline models), parameter recovery improved with increasing sample size. At N = 1,114, estimates were biased and imprecise, with incorrect effect direction for exposure-response parameters (e.g., learned-weight {beta}1 bias = - 0.79; EmpSE = 2.61; coverage = 0.88). In contrast, the models accurately recovered parameters at larger sample sizes, including the latent distance-decay parameter (bias = - 0.02; EmpSE = 0.15; coverage = 0.95 at N = 100,000), demonstrating their ability to reliably learn movement-based exposure weights when sufficient data were available. Conclusion. Instead of relying on arbitrarily-sized buffers, this statistical framework provides a novel method for studying environmental exposure-health relationships whilst accounting for human movement. With sufficiently large sample sizes, it can accurately estimate the influence of disaggregated environmental exposures on individual-level health and help address exposure misclassification arising from residential-only metrics. This methodological framework remains scalable, interpretable, and adaptable to other exposures and outcomes, offering a foundation for future work that integrates richer mobility-informed exposure-health research.

22.
arXiv (CS.AI) 2026-06-11

On the Geometry of On-Policy Distillation

arXiv:2606.07082v2 Announce Type: replace-cross Abstract: On-policy distillation (OPD) is increasingly used to improve large language model reasoning, but its training dynamics remain poorly understood. We characterize the trajectory of OPD updates in parameter space and compare it with supervised fine-tuning (SFT) and reinforcement learning with verifiable rewards (RLVR). A suite of parameter-space diagnostics consistently places OPD in a relaxed off-principal regime: compared with SFT, its updates affect fewer weights and avoid principal directions more strongly, while compared with RLVR, they remain less tightly constrained. Beyond this static localization, OPD exhibits subspace locking: its cumulative updates rapidly enter a narrow low-dimensional channel. Constraining training to the update subspace formed early in training preserves OPD performance but substantially degrades SFT, indicating that the locked subspace is functionally sufficient for OPD. Control experiments further show that sparsifying the update tokens and shifting rollout generation off-policy preserve the rank dynamics, whereas mixing the OPD objective with RLVR changes them. Overall, these results suggest that OPD is not merely an intermediate point between SFT and RLVR, but induces its own update geometry in parameter space.

23.
arXiv (CS.AI) 2026-06-17

Distributed General-Purpose Agent Networks: Architecture, Key Mechanisms, and Prototypes

arXiv:2606.17368v1 Announce Type: new Abstract: Large language models have accelerated the transition from passive conversational assistants to autonomous agents that can understand goals, plan actions, invoke tools, and execute multi-step tasks. Yet the capability of a single agent remains constrained by its local data, tool permissions, runtime environment, and governance boundary. This paper studies distributed general-purpose agent networks: open peer-to-peer networks in which heterogeneous agents deployed on personal devices, edge nodes, or autonomous computing environments can discover one another, establish trust, negotiate cooperation rules, and execute open-ended tasks. We argue that such networks cannot be obtained by simply combining existing peer-to-peer overlays with conventional multi-agent systems. Unlike traditional P2P networks, agent networks must propagate semantic declarations about intentions, capabilities, states, and cooperation constraints. We therefore propose a layered architecture centered on a protocol adaptation layer that connects upper-level task semantics with lower-level network operations. Based on this architecture, the paper identifies three core mechanism problems: semantic announcement propagation for collaborator discovery, verifiable identity and multi-topic reputation for cooperation governance, and semantic-gradient mechanism design for open task execution. For each problem, we present a technical route, including bodyless gossip with sequential logs, BAID-based identity binding with MG-EigenTrust reputation, and a Stackelberg-style mechanism-generation loop driven by semantic attribution feedback. We further report prototype overhead results for BAID-style tiered verification and mechanism-level simulations of MG-EigenTrust under cross-topic disguise-collusion attacks. The resulting framework provides a system-level foundation for open, trustworthy, and scalable agent collaboration.

24.
arXiv (CS.AI) 2026-06-16

Steering Emotional Dynamics for Art Therapy: Controllable Narrative Script Generation through Hierarchically Guided LLM Agents

arXiv:2606.16481v1 Announce Type: new Abstract: Art therapy plays a vital role in emotional healing, in which narrative creation acts as the primary vehicle for emotional expression. Given the inherently dynamic nature of emotions during healing, narratives with finely controlled emotional fluctuations enable individuals to safely project inner conflicts and achieve emotional catharsis. Recently, with the rapid development of Large Language Models (LLMs), automated narrative generation technology has provided a new pathway to support such artistic designs. However, while existing methods can produce fluent texts, they struggle to generate narratives that adhere to specified affective trajectories, failing to meet the demands of emotion-oriented psychological healing. To address these issues, this paper proposes EC-Script, an LLM agent-based framework that enables hierarchical control of the affective trajectory in narrative generation for emotional healing. To ensure that the generated narratives strictly follow the given emotional patterns, EC-Script establishes overall narrative direction through Emotion-Trajectory Planning, propels scene-level plot development with Character-Driven Scene Generation, and regulates local emotional changes of characters via Emotion-Controlled Script Writing. Ultimately, it outputs scene-by-scene script content that remains highly consistent with the preset affective trajectory. Experimental results demonstrate that EC-Script significantly outperforms baseline methods in affective trajectory adherence, exhibiting excellent and reliable emotional controllability, thereby providing effective technical support for AI-assisted emotional healing scenarios.

25.
Nature (Science) 2026-06-10

Lignin to adipic acid in a high-yield chemical and biological redox process

Viable manufacturing pathways to produce bio-based chemicals from renewable feedstocks, such as lignin derived from plant biomass, are needed to decarbonize the chemicals manufacturing sector. Converting the recalcitrant lignin polymer to valuable bioproducts remains a longstanding challenge in biorefining, with the highest reported single-product yield from lignin currently around 20 wt% (refs. 1–4). Most existing lignin depolymerization strategies target aryl–ether bond cleavage, which can produce aromatic monomers in yields of only about 30 wt%, and&nbsp;still as complex mixtures with C–C-linked dimers and oligomers5,6. The recalcitrance of these C–C linkages between aromatic moieties fundamentally limits single-product yields from lignin, prompting the development of strategies to efficiently cleave these C–C bonds3,7–9. Here we show how reductive processing of lignin from poplar accesses a hydrocarbon mixture of alkyl-aromatic monomers and oligomers that is privileged for oxidative conversion to monomeric aromatic carboxylic acids, comprising mostly benzoic acid and phthalic acid isomers in up to 73 wt% monomer yields, using a Co/Mn/Br catalyst. The soil bacterium Pseudomonas putida KT2440 was engineered to convert this mixture of aromatic carboxylic acids to muconolactone, a precursor to bio-based nylons, enabling final adipic acid yields up to 26 wt% (gram adipic acid per gram lignin) with a maximum theoretical yield of 57&nbsp;wt%. This pairing of reductive and oxidative steps with lignin resembles processes in petrochemical refining and shows how lignin may be converted into a single, valuable bioproduct in high yields. A chemical and biological redox process that resembles processes in petrochemical refining is used to convert lignin from poplar into a single, valuable bioproduct, adipic acid, in high yields.