Academic Intelligence · Curated Daily

探索全球前沿学术脉络

AcademicHub 汇聚顶级期刊与预印本平台的实时文献。定制您的专属科研雷达,利用大语言模型自动生成交叉领域文献分析简报。

01.
medRxiv (Medicine) 2026-06-10

A risk-of-contagion index using a Bayesian based model for the COVID-19 epidemic in Mexico

During the COVID-19 pandemic, limited testing capacity and reporting delays complicated epidemic surveillance and decision-making in Mexico. We calibrated textit{covidestim}, a Bayesian nowcasting model, to estimate the total SARS-CoV-2 infections from reported cases and deaths using Mexican surveillance data. Disease-progression distribution priors were calibrated using Mexico City records and validated through comparisons with national seroprevalence surveys, hospitalization data, and annual reported severe-case rates across all states. Using the reconstructed estimates of active infections, we implemented an event-based risk framework that quantifies the probability of encountering at least one infectious individual in gatherings of different sizes. This probability was subsequently translated into a four-level epidemiological traffic-light indicator and computed at both state and municipality levels. The resulting estimates revealed substantial spatial heterogeneity that is obscured by state-level aggregation, particularly in states with marked differences between urban and rural municipalities. To evaluate consistency with public-health indicators, we compared the proposed risk classification with the official Mexican epidemiological traffic-light system, considering interpretable gathering sizes relevant to public-health decision making. Weekly reports derived from this framework were delivered to policymakers in the State of Queretaro in Mexico, as an anticipation tool for school reopening and public-space management. This demonstrates that this Bayesian reconstruction of infections combined with event-based risk metrics can provide an interpretable and generalizable municipality-level complement to routine surveillance systems, particularly in regions with limited testing capacity and heterogeneous local transmission dynamics.

02.
arXiv (CS.LG) 2026-06-16

Machine Learning-Driven Chemical Reactor Network Modeling of the Sandia-D Flame

arXiv:2606.14729v1 Announce Type: cross Abstract: Turbulent combustion simulations are crucial for many scientific and engineering systems. However, the high cost to fully resolve the complex multiscale and multiphysics behavior makes direct simulation typically infeasible. The equivalent reactor network (ERN) approach attempts to improve computational efficiency by replacing a multidimensional turbulent simulation with a series of much cheaper 0-D and 1-D chemical reactors, providing a surrogate model that retains detailed chemistry at the cost of simplified flow physics. However, their development remains a challenge, often requiring either expert analysis, or automated approaches that sacrifice accuracy. In this work, we develop an automated machine-learning-assisted framework for constructing ERNs of the Sandia-D turbulent methane/air flame. Principal component analysis is first used to reduce high-dimensional thermochemical computational fluid dynamics (CFD) data to a low-dimensional latent space, where k-means clustering identifies physically interpretable flame regions used to initialize a reactor-network graph. This initialization is then refined using finite-difference gradient descent wrapped around non-differentiable Cantera reactor simulations. Across 30 RANS simulations spanning a range of pilot temperatures and inlet methane compositions, the optimized 7-reactor ERN achieves a maximum-temperature $R^2$ score of 0.7945 while preserving a $\sim6000\times$ speedup over the CFD solver. Outlet CO prediction remains more challenging, with a final $R^2$ score of $-0.4183$, but improves substantially from the unoptimized clustering initialization. These results show that unsupervised thermochemical feature extraction can provide effective physics-informed initializations for ERN construction, while gradient-based refinement can significantly improve predictive accuracy without manual reactor-network design.

03.
arXiv (CS.CL) 2026-06-12

Two Wrongs, No Right: Auditing Social-Desirability Bias in LLM Annotators for Computational Social Science

作者:

LLM annotators are increasingly used in computational social science (CSS), but it is unclear whether their alignment-shaped errors preserve the empirical conclusions a researcher would report. We audit three open-source 7B instruction-tuned models (Zephyr, Mistral-Instruct, Qwen2.5-Instruct) across six TweetEval tasks under four prompt conditions (72 cells) and find that social-desirability failures do not run in a single direction. Zephyr exhibits leniency bias, systematically under-applying harmful labels (offensive language: false benign rate 0.729, false alarm rate 0.031). Mistral and Qwen exhibit overcorrection, over-applying the same labels (Mistral hate-speech FAR = 0.604). All three models exhibit neutrality bias on abortion stance, underestimating opposition prevalence by 24 to 40 percentage points and inflating the neutral label. None of the four prompting interventions we test (neutral, safety framing, depersonalized, chain-of-thought) corrects these failures across models; safety framing can worsen stance distortion. Strikingly, Zephyr's hate-speech prevalence estimate matches the gold rate exactly while its class-conditional errors are large in both directions, an accidental cancellation that misleads aggregate validation. We translate these patterns into a three-part taxonomy with diagnostic FBR/FAR signatures and a lightweight gold-sample validation protocol. The headline for trustworthy CSS: a model that looks calibrated on aggregate metrics can still flip the substantive empirical conclusion a researcher would report.

04.
arXiv (CS.CV) 2026-06-15

StereoGeo: an end-to-end stereo camera calibration method

In this work, we propose StereoGeo, an end-to-end network-based approach for stereo camera calibration. Our method estimates the focal lengths and gravity directions of the left and right cameras, as well as the relative extrinsic transformation relating them. Existing methods often rely on calibration patterns in structured environments or address only a single camera configuration, being limited to either intrinsic or extrinsic estimation, and depending on a multi-view setups. StereoGeo extends the GeoCalib algorithm, integrating deep neural network feature extraction with a differentiable optimizer. Extensive experiments on real-world benchmarks demonstrate that StereoGeo achieves competitive performance for intrinsic calibration and provides accurate stereo extrinsic estimation, outperforming existing methods that are limited to monocular settings. The dataset used in this work is partially publicly available at https://github.com/meddourimane/StereoGeo-dataset.

05.
arXiv (CS.AI) 2026-06-12

EPIG: Emotion-Based Prompting for Personalised Image Generation

arXiv:2606.13247v1 Announce Type: new Abstract: Text-to-image diffusion models have achieved impressive results in synthesizing high-quality images from natural language prompts. However, commonly used prompting strategies remain relatively generic, limiting the model's ability to accurately express emotional intent and nuanced affective attributes. This work proposes EPIG, a method that enhances emotional expressiveness at the prompt level prior to image generation. Grounded in psychologically informed emotion representations (valence-arousal) and leveraging structured, role-aware prompt enrichment, EPIG enriches emotion-related components of prompts without modifying or retraining the image generation backbone. The resulting emotion-aware prompts guide the generative process toward more emotionally coherent visual outputs, with particular effectiveness in controlling arousal. EPIG is lightweight, training-free, and well suited for resource-constrained and personalized image generation scenarios. Experimental results on a benchmark of 10 diverse prompts show that EPIG reduces mean arousal error compared to strong baselines, including naive insertion and LLM-based prompt expansion, with reductions of 14% and 12%, respectively. These improvements are statistically significant. EPIG also preserves valence alignment and semantic consistency, as measured by CLIPScore and supported by ablation studies. The effect is more pronounced on prompts containing explicit subjects such as humans, children, or animals, where the reduction reaches 17%, highlighting the subject-sensitive behavior of the proposed method.

06.
arXiv (CS.CL) 2026-06-16

Dr-DCI: Scaling Direct Corpus Interaction via Dynamic Workspace Expansion

Agentic search over large corpora relies on retriever-mediated interfaces (e.g., BM25 or ColBERT) for scalable candidate discovery. While effective at ranking relevant documents, these interfaces expose evidence only as ranked results or bounded document views, limiting agents' ability to reorganize material and verify constraints across documents. Direct Corpus Interaction (DCI) addresses this limitation by exposing shell-executable corpus operations for flexible search, filtering, comparison, and verification. However, full-corpus terminal commands become slow and unstable as the corpus grows, degrading performance and efficiency. We introduce DR-DCI, a retriever-steered DCI framework that treats retrieval as an agent-callable action for expanding a local workspace. Rather than operating directly over the full corpus, the agent dynamically pulls relevant documents into an evolving workspace and conducts DCI operations within it. This design combines retriever-level recall with DCI-style precision: retrieval keeps exploration scalable, while DCI preserves the local operations needed for effective evidence resolution. Experiments show that DR-DCI is both effective and efficient across scales. On Browsecomp-Plus, DR-DCI reaches 71.2\% accuracy, improving over raw DCI and ablated variants by up to 8.3 points while reducing tool usage, wall time, and estimated cost. With workspace-preserving context reset, accuracy further improves to 73.3\%. In corpus-scaling experiments, DR-DCI remains effective from 100K to 10M documents, whereas raw DCI becomes unstable and BM25 performs substantially worse. DR-DCI also scales to a 20M-scale file-per-document Wiki-18 QA setting, achieving an average score of 63.0 across six benchmarks and outperforming retrieval-based and trained search-agent baselines. Ablation analysis further shows that ranked previews and inter-document DCI are key to performance.

07.
arXiv (CS.LG) 2026-06-19

DisjunctiveNet: Neural Symbolic Learning via Differentiable Convexified Optimization Layers

arXiv:2605.30456v2 Announce Type: replace Abstract: Many learning tasks in science and engineering are characterized by sparse datasets, which limits the effectiveness of purely data-driven approaches. At the same time, these problems are often accompanied by rich domain knowledge derived from physical laws, operational requirements, and expert heuristics. Such knowledge is frequently expressed as rules involving logical propositions and linear inequalities. Existing neuro-symbolic methods typically enforce these rules approximately through soft penalties, assume input-independent rules when designing specialized architectures, or rely on non-differentiable post-processing at inference time to achieve hard constraint satisfaction. While recent advances in differentiable optimization layers enable end-to-end feasibility enforcement within neural networks, extending these approaches to logical or mixed-integer rules remains challenging due to inherent nonconvexity. In this work, we propose a unified end-to-end framework for enforcing hard, input-dependent mixed integer linear constraints within neural networks. Our approach represents rules as disjunctive constraints and applies hierarchical convex relaxations to obtain convex hull formulations. These relaxations yield tractable linear constraints that can be embedded as differentiable optimization layers while enabling exact rule satisfaction. We demonstrate the effectiveness of the proposed framework on real-world datasets, achieving perfect rule satisfaction and strong predictive performance.

08.
arXiv (CS.LG) 2026-06-18

Towards a future space-based, highly scalable AI infrastructure system design

arXiv:2511.19468v2 Announce Type: replace-cross Abstract: If AI is a foundational general-purpose technology, we should anticipate that demand for AI compute – and energy – will continue to grow. The Sun is by far the largest energy source in our solar system, and thus it warrants consideration how future AI infrastructure could most efficiently tap into that power. This work explores a scalable compute system for machine learning in space, using fleets of satellites equipped with solar arrays, inter-satellite links using free-space optics, and Google tensor processing unit (TPU) accelerator chips. To facilitate high-bandwidth, low-latency inter-satellite communication, the satellites would be flown in close proximity. We illustrate the basic approach to formation flight via an 81-satellite cluster of 1 km radius, and describe an approach for using high-precision ML-based models to control large-scale constellations. Trillium TPUs are radiation tested. They survive a total ionizing dose equivalent to a 5 year mission life without permanent failures, and are characterized for bit-flip errors. Launch costs are a critical part of overall system cost; a learning curve analysis suggests launch to low-Earth orbit (LEO) may reach $\lesssim$\$200/kg by the mid-2030s.

09.
arXiv (CS.AI) 2026-06-15

VISTA: View-Consistent Self-Verified Training for GUI Grounding

arXiv:2606.14579v1 Announce Type: new Abstract: When applying Group Relative Policy Optimization (GRPO) for GUI Grounding, rollouts are sampled from a single screenshot view; groups often become either all failures on difficult instances or all successes on easy ones, yielding no useful relative advantage. We propose VISTA (View-Consistent Self-Verified Training), a GRPO-based training framework that constructs each comparison group from multiple target-preserving views of the same GUI instance.Each view is generated by a crop that keeps the target element visible and remaps its box exactly, so model rollouts are compared across semantically equivalent but geometrically different inputs. To stabilize short coordinate generation without turning reinforcement learning into unconditional imitation, VISTA further adds a self-verified cross-view anchor: an oracle answer optimized with an advantage-weighted loss, excluded from the group baseline and activated only when the model has produced a maximum-reward rollout. Across five GUI-grounding benchmarks and multiple Qwen backbones, VISTA consistently improves grounding accuracy.On ScreenSpot-Pro, it raises Qwen3-VL 4B/8B/30B-A3B from 55.5/52.7/53.7 to 63.4/65.8/67.0. Robustness analyses further show higher worst-view accuracy and lower prediction flip rates.

10.
arXiv (CS.CV) 2026-06-16

RealityBridge: Bridging Editable 3D Gaussian Splatting Driving Simulations and Real-World Videos

Long-tail hazardous scenarios are essential for safety-oriented autonomous driving, yet they are difficult to collect and reproduce at scale. Editable 3D Gaussian Splatting (3DGS) simulation offers a promising alternative by reconstructing real driving scenes and supporting controllable scene editing. However, edited 3DGS-rendered videos still suffer from a significant Sim-to-Real gap, including rendering artifacts, degraded foreground assets, inconsistent illumination, and temporal flickering. Existing restoration and video generation methods are insufficient for this task, as they often fail to jointly repair 3DGS-specific artifacts, improve visual realism, and ensure temporal consistency. To fill this gap, we propose RealityBridge, a structure-preserving and asset-aware Sim-to-Real framework for edited 3DGS driving videos. RealityBridge uses multimodal controls, including rendered videos, foreground masks, edge maps, and semantic masks, together with a lightweight GateNet for adaptive condition allocation across backbone layers. We further construct targeted training data and introduce autoregressive long-video training with reward-guided post-training to improve restoration quality, temporal stability, and hallucination suppression. Extensive experiments on internal and public driving datasets show that RealityBridge outperforms existing methods in artifact removal, illumination harmonization, and long-sequence temporal consistency.

11.
arXiv (CS.CL) 2026-06-15

MoDiCoL: A Modular Diagnostic Continual Learning Dataset for Robust Speech Recognition

Modern Automatic Speech Recognition (ASR) systems have made remarkable progress on standard benchmarks, yet performance gaps have emerged under real-world distribution shifts, caused by recording conditions, accents, speech impairments, and noise. Existing datasets and benchmarks typically isolate these factors, which overlooks their co-occurrence in real-world applications. In this paper, we argue that model robustness can be treated as a dynamic capability that continually develops, and we introduce MoDiCoL, a Modular Diagnostic Continual Learning dataset designed for controlled analysis of linguistic content, speaker characteristics, and acoustic environments. Furthermore, we propose a real-world-inspired continual learning curriculum to simulate incremental updates and study how robustness is acquired, transferred, and forgotten. We evaluate three continual learning strategies and provide detailed insights into robustness under evolving conditions.

12.
bioRxiv (Bioinfo) 2026-06-18

Trajectory inference of epithelial-centered neighborhood profiles reconstructs a pseudo-temporal continuum in idiopathic pulmonary fibrosis

Idiopathic pulmonary fibrosis (IPF) is characterized by complex lung architecture and spatially heterogeneous remodeling, which have hindered integrated analysis of cell-intrinsic activity and intercellular communication during disease progression. Here we profiled six IPF lung specimens comprising more than 630,000 cells using the Xenium 5k panel and developed an epithelial-centered neighborhood profiling framework based on the local cellular composition around each epithelial cell. This approach captured fibrosis-associated variation in epithelial niches without requiring predefined histological regions. Pseudo-temporal continuum inference of these profiles reconstructed a continuous axis that reflected the spatial progression of fibrotic remodeling from relatively preserved alveolar regions to fibrotic and airway-like remodeled regions. Within this spatial dataset, we mapped coordinated changes in epithelial states, local microenvironments, epithelial intracellular pathway activities, and directional interactions with neighboring cell types along the same axis. Our findings provide a spatial framework that generates testable hypotheses for progressive epithelial niche remodeling in IPF.

13.
arXiv (CS.LG) 2026-06-12

EPM-JEPA: Operator-Side Experience Modulation in JEPA-Family World Models

arXiv:2606.12979v1 Announce Type: new Abstract: JEPA-family world models use a static predictor whose weights do not adapt when test-time dynamics diverge from training. We compare two mechanisms for incorporating accumulated experience into a JEPA predictor under distribution shift: operand-side injection, where a compressed experience representation is added as a residual to the predictor's hidden state (EI-JEPA), and operator-side modulation, where the same representation generates low-rank weight deltas via LoRA applied to the predictor's weights (EPM-JEPA). On a pre-registered comparison (Moving MNIST, gravity shift), EPM-JEPA (D_shift^{n=50} = 0.7848 +/- 0.0078, three seeds) differs from EI-JEPA (0.8238) by delta = 4.74% - Outcome C: a null result - by our stated criterion, a valid outcome. As a secondary, non-pre-registered observation, EPM-JEPA improves 1.90% over a no-memory baseline (0.8000), consistently across seeds, while EI-JEPA underperforms the baseline, indicating the benefit is specific to weight-level modulation. Our primary contribution is a mechanism analysis: the D_shift^{n=50} trajectory reflects three independent dynamical processes - buffer cycling, EMA target drift, and an intrinsic LoRA settling transient of +0.021 - rather than convergence to equilibrium. These findings motivate PEM-JEPA, a physics-grounded successor addressing this dynamical-peak limitation.

14.
arXiv (CS.AI) 2026-06-15

AI Receptivity or AI Adoption Breadth? A Tool-Specific Reanalysis of the Lower-Literacy/Higher-Usage Link

arXiv:2606.13734v1 Announce Type: new Abstract: Recent evidence reported by Tully, Longoni, and Appel (2025) suggests that lower artificial intelligence (AI) literacy predicts greater receptivity toward AI. We revisit this claim using the public data from Study 3 of that article, which measures past usage of five AI tool categories on a five-point frequency scale. We first reproduce the negative association between AI literacy and aggregate AI usage using OLS on participant-level averages, binary logit, ordered logit, and multinomial logit specifications. We then show that the aggregate relationship masks substantial heterogeneity by tool type. In our demographic-adjusted primary specification, AI literacy does not significantly predict text AI usage (ordered-logit $\beta$ = -0.090, p = .387), whereas it remains a strong predictor of non-text AI adoption ($\beta$ = -0.377, p < .001). The non-text effect is also robust under Tully et al.'s original Study 3 control specification ($\beta$ = -0.502, p < .001). Binary, ordered-logit, and multinomial specifications suggest that the non-text relationship is primarily an adoption/non-adoption pattern rather than evidence of intensive use: the demographic-adjusted odds ratio of ever having used a non-text AI tool is 0.68. Thus, in the study that measures self-reported past usage rather than stated preferences, the evidence does not support a simple claim that lower AI literacy predicts greater receptivity to AI in general. It points instead to a narrower pattern of broader adoption across lower-penetration, non-text AI tools.

15.
arXiv (CS.LG) 2026-06-19

Optimal Coarse Correlated Equilibria in Mean Field Games: Linear Programming and No-Regret Learning

arXiv:2606.20062v1 Announce Type: cross Abstract: We introduce optimal coarse correlated equilibria for continuous-time mean field games. A coarse correlated equilibrium is a randomized recommendation scheme from which no player can gain by ignoring the recommendation and switching to an alternative strategy. The problem is as follows: a moderator selects, among all mean-field coarse correlated equilibria, one that optimizes a prescribed performance criterion, which may differ from the representative player's objective. After formulating the problem, we develop a linear programming (LP) formulation, prove the existence of optimal LP coarse correlated equilibria, and relate the LP characterization to the original probabilistic setting. Building on this characterization, we design a no-regret primal-dual algorithm, based on an equivalent Lagrangian formulation of the external-regret constraint, for learning such equilibria. We provide explicit convergence rates for the learning algorithm, and numerical examples illustrate the method.

16.
arXiv (CS.LG) 2026-06-17

Learning and Generating Mixed States Prepared by Shallow Channel Circuits

arXiv:2604.01197v4 Announce Type: replace-cross Abstract: Learning quantum states from measurement data is a central problem in quantum information and computational complexity. In this work, we study the problem of learning to generate mixed states on a finite-dimensional lattice. Motivated by recent developments in mixed state phases of matter, we focus on arbitrary states in the trivial phase. A state belongs to the trivial phase if there exists a shallow preparation channel circuit under which local reversibility is preserved throughout the preparation. We prove that any mixed state in this class can be efficiently learned from measurement access alone. Specifically, given copies of an unknown trivial phase mixed state, our algorithm outputs a shallow local channel circuit that approximately generates this state in trace distance. The sample complexity and runtime are polynomial (or quasi-polynomial) in the number of qubits, assuming constant (or polylogarithmic) circuit depth and gate locality. Importantly, the learner is not given the original preparation circuit and relies only on its existence. Our results provide a structural foundation for quantum generative models based on shallow channel circuits. In the classical limit, our framework also inspires an efficient algorithm for classical diffusion models using only a polynomial overhead of training and generation.

17.
arXiv (math.PR) 2026-06-15

Stability of the $k$-Plane Transform on Measures and Hölder-Type Comparisons of Wasserstein Metrics

arXiv:2605.00375v2 Announce Type: replace-cross Abstract: We establish stability estimates for the $k$-plane transform on finite positive Radon measures, with emphasis on Fourier and Wasserstein metrics. We first introduce a metric on $k$-plane transform data and prove a bi-Lipschitz stability estimate showing that this metric is equivalent to a generalized Fourier metric obtained by augmenting the Fourier distance between centered normalized measures with separate barycenter and total mass difference terms. Building on a Hölder-type comparison between Fourier and Wasserstein metrics due to Carrillo and Toscani, we extend this comparison to positive Radon measures under uniform bounds on centered moments of order slightly larger than $2$. This yields Hölder-type stability for the $k$-plane transform in a generalized $2$-Wasserstein metric and, in particular, a $W_2$-stability estimate for centered probability measures. We also compare the $2$-Wasserstein distance with its max-sliced analogue. For centered probability measures with uniformly bounded moments of order slightly larger than $2$, we prove a two-sided Hölder-type comparison between these distances. We then extend the result to positive Radon measures by applying it to centered normalized measures and adding separate barycenter and mass terms. Finally, for absolutely continuous compactly supported probability measures with bounded densities, we prove a strong equivalence between the $2$-Wasserstein distance of the measures and the $(k/2-1)$-order Sobolev norm of the $k$-plane transform data of the difference of their densities.

18.
PLOS Computational Biology 2026-06-05

Heuristic multi-site optimization for protein sequence design using Masked Protein Language Models

作者:

by Lijuan Wang, Yuze Wang, Chen Qiu, Liwei Xiao, Xianliang Liu, Junjie Chen Protein sequence design for tailored functional properties is a fundamental task in protein engineering, with critical applications in drug discovery and therapeutic development. Efficient navigation of the combinatorial vastness of protein sequence space to identify functional variants remains a formidable challenge. Conventional approaches, which predominantly rely on template-based local search or single-residue mutagenesis, are constrained by their susceptibility to local optima and their potential risk of destabilizing native structural stability. In this study, we introduce ProtHMSO, a heuristic multi-site optimization framework leveraging masked protein language models (ProtLMs) for context-aware sequence exploration. ProtHMSO mimics natural evolutionary mechanisms by employing ProtLM-derived substitution probabilities to guide heuristic searches for synergistic mutations, thereby constraining combinatorial search spaces through evolutionary and biophysical priors. ProtHMSO is further applied to replace the exploration strategies in genetic algorithms (GAs) and Monte Carlo tree search (MCTS) for improving their convergence efficiency. Benchmark experiments demonstrate that protein sequences generated by ProtHMSO exhibit superior functional performance and closer alignment with natural sequence distribution, compared with state-of-the-art methods. These advancements highlight that ProtHMSO has strong potential and compatibility to accelerate functional protein discovery, offering a robust framework for efficient and context-aware exploration of protein sequence space.

19.
arXiv (CS.AI) 2026-06-16

RollArt: Disaggregated Multi-Task Agentic RL Training at Scale

arXiv:2512.22560v2 Announce Type: replace-cross Abstract: Agentic Reinforcement Learning (RL) trains LLMs through multi-turn interactions with environments, producing workloads that mix compute-bound prefill, bandwidth-bound decoding, CPU-heavy environment execution, and bursty reward evaluation. Existing systems either colocate all stages on a single GPU cluster or decouple them only at a coarse granularity, overlooking hardware heterogeneity and incurring substantial synchronization overhead across stages. We present ROLLART, a system for multi-task agentic RL on disaggregated infrastructure. ROLLART maps each pipeline stage to best-fit hardware, routing prefill-heavy tasks to compute-optimized GPUs, decode-heavy tasks to bandwidth-optimized GPUs, and environments to CPU clusters. It decouples rollout at the trajectory level, allowing generation, environment interaction, and reward scoring to proceed independently, so that slow or failed environments never block the others. ROLLART offloads stateless reward computation to serverless infrastructure and overlaps rollout with training via staleness-bounded asynchronous weight synchronization. Our results demonstrate that ROLLART effectively improves training throughput and achieves 1.31–2.05 \(\times\) training time reduction compared to various RL systems. We also evaluated ROLLART by training a hundreds-of-billions-parameter MoE model for Qoder product on an Alibaba cluster with above 3,000 GPUs, demonstrating its stability and scalability.

20.
arXiv (CS.CV) 2026-06-11

SCAIL-2: Unifying Controlled Character Animation with End-to-end In-Context Conditioning

Controlled character animation requires transferring motion from a driving sequence to a reference character. Prior works heavily rely on intermediate representations, including pose skeletons to represent motion or masked background to represent environment, which inevitably leads to information loss. To address this, we present SCAIL-2, a framework that bypasses those intermediates and achieves end-to-end character animation. By directly concatenating driving videos to the sequence, the model can obtain all the required visual information from the input video. To address the lack of end-to-end data, we unify sub-tasks of character animation with decoupled conditions and then curate a pipeline to synthesize MotionPair-60K, an end-to-end motion transfer dataset containing heterogeneous tasks of character animation. To achieve the unification, we utilize in-context mask conditioning and mode-specific RoPE as soft guidance beyond textual instructions and raw visual information. To address synthetic discrepancy in detailed regions, we propose Bias-Aware DPO to construct preference items to mitigate the errors. Extensive experiments demonstrate that our method substantially outperforms existing state-of-the-art approaches in various character animation tasks. A large subset of synthetic data as well as model weights will be released at our project page: https://teal024.github.io/SCAIL-2/.

21.
arXiv (CS.CV) 2026-06-12

CRAG: Can 3D Generative Models Help 3D Assembly?

Most existing 3D assembly methods treat the problem as pure pose estimation, rearranging observed parts via rigid transformations. In contrast, human assembly naturally couples structural reasoning with holistic shape inference. Inspired by this intuition, we reformulate 3D assembly as a joint problem of assembly and generation. We show that these two processes are mutually reinforcing: assembly provides part-level structural priors for generation, while generation injects holistic shape context that resolves ambiguities in assembly. Unlike prior methods that cannot synthesize missing geometry, we propose CRAG, which simultaneously generates plausible complete shapes and predicts poses for input parts. Extensive experiments demonstrate state-of-the-art performance across in-the-wild objects with diverse geometries, varying part counts, and missing pieces. Project Page: https://ai4ce.github.io/CRAG/

22.
arXiv (CS.CV) 2026-06-16

Auteur: Language-Driven Cinematographic Framing for Human-Centric Video Generation

Generative video models have achieved remarkable visual fidelity and temporal coherence, yet intentional camera control remains elusive. Existing frameworks treat camera motion as a byproduct of pixel synthesis, producing trajectories that are stochastic, spatially inconsistent, and indifferent to the human subject driving the scene. In this work, we present Auteur, a method for language-driven, human-centric camera framing in generative video. Our core insight is that professional filmmakers conceive shots not as world-space trajectories but as framings defined relative to the actor, encoding shot size, angle, and composition as functions of human pose and motion. We formalize this intuition as a human-centric camera parameterization and introduce a Domain-Specific Language (DSL) that is convertible to standard 6-DoF camera parameters. A fine-tuned multimodal large language model then acts as a virtual director, mapping natural language descriptions and coarse human motion to sparse DSL keyframes that are deterministically interpolated into continuous camera trajectories, which are then provided as input to video generators. We train and evaluate Auteur on a new dataset of 34K aligned text, human motion, and DSL-annotated camera trajectories drawn from procedural synthesis and real-world movie footage from the CondensedMovies dataset. Auteur enables cinematographic framing of human-centered scenes, a capability largely absent in prior generative models. To assess this behavior, we propose new framing-focused metrics, and our experiments show that Auteur consistently outperforms existing methods. Project page is https://cyberiada.github.io/Auteur/

23.
arXiv (CS.CV) 2026-06-15

Digital Twin Driven Textile Classification and Foreign Object Recognition in Automated Sorting Systems

The increasing demand for sustainable textile recycling requires robust automation solutions capable of handling deformable garments and detecting foreign objects in cluttered environments. This work presents a digital twin driven robotic sorting system that integrates grasp prediction, multi modal perception, and semantic reasoning for real world textile classification. A dual arm robotic cell equipped with RGBD sensing, capacitive tactile feedback, and collision-aware motion planning autonomously separates garments from an unsorted basket, transfers them to an inspection zone, and classifies them using state of the art Visual Language Models (VLMs). We benchmark nine VLM s from five model families on a dataset of 223 inspection scenarios comprising shirts, socks, trousers, underwear, foreign objects (including garments outside of the aforementioned classes), and empty scenes. The evaluation assesses per class accuracy, hallucination behavior, and computational performance under practical hardware constraints. Results show that the Qwen model family achieves the highest overall accuracy (up to 87.9 %), with strong foreign object detection performance, while lighter models such as Gemma3 offer competitive speed accuracy trade offs for edge deployment. A digital twin combined with MoveIt enables collision aware path planning and integrates segmented 3D point clouds of inspected garments into the virtual environment for improved manipulation reliability. The presented system demonstrates the feasibility of combining semantic VLM reasoning with conventional grasp detection and digital twin technology for scalable, autonomous textile sorting in realistic industrial settings.

24.
arXiv (CS.AI) 2026-06-19

Bid Farewell to Seesaw: Towards Accurate Long-tail Session-based Recommendation via Dual Constraints of Hybrid Intents

arXiv:2511.08378v4 Announce Type: replace-cross Abstract: Session-based recommendation (SBR) aims to predict anonymous users' next interaction based on their interaction sessions. In the practical recommendation scenario, low-exposure items constitute the majority of interactions, creating a long-tail distribution that severely compromises recommendation diversity. Existing approaches attempt to address this issue by promoting tail items but incur accuracy degradation, exhibiting a "see-saw" effect between long-tail and accuracy performance. We attribute such conflict to session-irrelevant noise within the tail items, which existing long-tail approaches fail to identify and constrain effectively. To resolve this fundamental conflict, we propose HID (Hybrid Intent-based Dual Constraint Framework), a plug-and-play framework that transforms the conventional "see-saw" into "win-win" through introducing the hybrid intent-based dual constraints for both long-tail and accuracy. Two key innovations are incorporated in this framework: (i) Hybrid Intent Learning, where we reformulate the intent extraction strategies by employing attribute-aware spectral clustering to reconstruct the item-to-intent mapping. Furthermore, discrimination of session-irrelevant noise is achieved through the assignment of the target and noise intents to each session. (ii) Intent Constraint Loss, which incorporates two novel constraint paradigms regarding the diversity and accuracy to regulate the representation learning process of both items and sessions. These two objectives are unified into a single training loss through rigorous theoretical derivation. Extensive experiments across multiple SBR models and datasets demonstrate that HID can enhance both long-tail performance and recommendation accuracy, establishing new state-of-the-art performance in long-tail recommender systems.

25.
arXiv (CS.CL) 2026-06-16

Replay What Matters: Off-Policy Replay for Efficient LLM Reinforcement Unlearning

LLM unlearning has emerged as a cost-effective alternative to full retraining for removing hazardous knowledge from pretrained models while preserving general utility. Recent RL-based methods such as RULE reformulate unlearning as learning a refusal behavior, but their on-policy optimization repeatedly samples from the same forget and retain/boundary prompts throughout training. We identify a critical inefficiency in this process: easy cases quickly converge and provide little useful gradient signal, while hard cases near the forget/retain boundary continue to produce low-reward rollouts that are discarded after a single use. To address this issue, we propose ReRULE, an off-policy replay enhancement for reinforcement unlearning. ReRULE stores low-reward hard-case rollout groups in a replay buffer during early GRPO training and reuses them in later stages through importance-sampled off-policy updates, redirecting computation toward boundary cases that still require learning. Theoretically, we show that ReRULE yields a tighter hard-case convergence bound than pure on-policy RULE. Empirically, ReRULE improves MUSE-Books Retain Quality from 46.3 to 56.2 while adding only 5–11% training time across benchmarks. Its limited improvement on the simpler TOFU setting further supports the intended conditional behavior: replay is most beneficial when the hard/easy disparity is pronounced.