探索全球前沿学术脉络

01.

arXiv (quant-ph) 2026-06-17 DOI: arXiv:2606.17866

Experimental Characterization and Modeling of Measurement-Induced State-Transitions in a Fluxonium Superconducting Qubit

作者:

Martijn F. S. Zwanenburg↗Jinlun Hu↗Eugene Y. Huang↗Figen Yilmaz↗Siddharth Singh↗Christian Kraglund Andersen↗

arXiv:2606.17866v1 Announce Type: new Abstract: Superconducting qubits are most often measured using dispersive readout, which, ideally, implements a projective quantum non-demolition (QND) measurement. While a larger readout drive can increase the signal and, thus, reduce discrimination errors in the readout, strong microwave drives may also cause non-QND errors by driving the qubit to a state outside the computational subspace. In this work, we experimentally characterize measurement-induced state transitions (MIST) in a fluxonium qubit over its full external flux range. We further numerically calculate the MIST errors, and find that the theory accurately predicts eleven experimentally identified regions with increased MIST. In addition to transitions to higher fluxonium levels, we also find that, at certain flux points, MIST errors are dominated by transitions that include the transmission-line-like array modes of the fluxonium's superinductor. The excellent match between theory and experiment validates that the models accurately predict the occurrence of MIST in these systems, and further highlights the influence of array modes in fluxonium readout.

阅读与讨论 → 访问原文 →

02.

arXiv (CS.AI) 2026-06-16 DOI: arXiv:2606.15385

Reward Hacking in Language Model Agents: Revisiting AI Safety Gridworlds

作者:

\"Omer Veysel \c{C}a\u{g}atan↗Xuandong Zhao↗

arXiv:2606.15385v1 Announce Type: new Abstract: Reward hacking, where AI systems exploit misspecified objectives to achieve high reward without satisfying intended goals, remains a central challenge in AI safety. Yet most known instances have been discovered post hoc in frontier systems where controlled study is impractical. We adapt the AI Safety Gridworlds framework into a text-based evaluation suite that reformulates classic reinforcement learning safety tasks for language-based agents. Across frontier and mid-scale models, we find that specification gaming emerges zero-shot: models systematically achieve high observed reward while underperforming on hidden safety objectives, and even apparently safe behaviors can reflect misunderstanding rather than principled safety. Reinforcement learning does not correct these failures: direct reward optimization widens the gap between observed and hidden reward, as the model's initial competence causes it to lock into locally rewarding strategies before discovering safer alternatives. This pattern persists across model scales (1.5B–14B) and is not resolved by finer credit assignment, exploration prompts, or entropy regularization. Our results show that reward hacking arises naturally when optimizing proxy objectives with capable language model agents and resists standard mitigations, suggesting that proxy-reward failures in agentic settings may require approaches beyond standard exploration and credit-assignment fixes. To facilitate reproducibility, the code for this work is available at \href{https://github.com/asparius/verl-agent-safety}{our public repository}.

阅读与讨论 → 访问原文 →

03.

arXiv (CS.CL) 2026-06-19 DOI: arXiv:2606.19744

Beyond Uniform Forgetting: A Study of Sequential Direct Preference Optimization Across Preference Settings

作者:

Pranav Bhandari↗Nicolas Fay↗Amitava Datta↗Usman Naseem↗Mehwish Nasim↗

Aligning language models with human preferences often requires optimising multiple behavioural objectives. A practical approach is to apply these objectives sequentially using preference optimisation methods such as Direct Preference Optimisation (DPO), but it remains unclear whether later training uniformly degrades preferences learned earlier or whether the effect depends on the relationship between objectives. We study sequential DPO across four preference settings covering distributional conflict, multi-attribute interaction, strong safety signal, and compatible response-quality objectives. Using Llama-3.1-8B-Instruct with LoRA adapters, we evaluate all objectives after every stage with a fixed base-model reference. We find that sequential DPO does not produce a single forgetting pattern; preference change ranges from partial degradation to stability, pair-level redistribution, or positive transfer depending on objective relationship, signal strength, and training order. Pair-level analysis using length-normalised policy margins shows that aggregate metrics can mask heterogeneous changes across preference pairs, whereas quartile decomposition reveals that high-confidence pairs can either degrade or improve depending on the setting. Mechanistic diagnostics show that Stage~2 gradients and adapter updates are near-orthogonal to the previous objective across all settings, providing little evidence that direct gradient opposition is the primary driver. These findings suggest that future sequential alignment pipelines should account for objective compatibility and signal strength, rather than assuming that later objectives affect earlier preferences uniformly.

阅读与讨论 → 访问原文 →

04.

medRxiv (Medicine) 2026-06-16 DOI: HASH:502f007f204d88ffefa7511740e084e1

Development and reliability and validity test of the Questionnaire on Knowledge, Attitude and Practice of ICU Nurses on Blood Oxygen Saturation Management in Mechanically Ventilated Patients

作者:

Xie↗Bian↗Yu↗He↗

Objective: A questionnaire on the knowledge, attitude and practice of ICU nurses regarding the management of blood oxygen saturation in patients with mechanical ventilation was compiled, and its reliability and validity were tested. Method: Drawing upon the knowledge-attitude-practice theory, the initial questionnaire draft was developed through literature review and consultation with Delphi experts. Employing convenience sampling, 32 nurses from the General ICU of Wuxi Second People's Hospital were surveyed between 1 August 2025 and 27 September 2025, enabling item screening and assessment of reliability and validity.The full version of the developed questionnaire is provided as Supporting Information (S1 File). All items are published under a CC BY 4.0 license, which permits unrestricted use, distribution, and reproduction in any medium, provided the original author and source are credited. Result: A questionnaire on the knowledge, attitude and practice of ICU nurses regarding the management of blood oxygen saturation in mechanically ventilated patients was finalised, comprising 26 items: 11 in the knowledge dimension, 6 in the attitude dimension and 9 in the behaviour dimension. The overall Cronbach's coefficient for the questionnaire was 0.88, with dimension-specific coefficients of 0.787, 0.722, and 0.781 respectively. The Spearman-Brown coefficient for the entire questionnaire was 0.967, while dimension-specific coefficients were 0.796, 0.666, and 0.728 respectively. The content validity index at the questionnaire level (S-CVI) was 0.886, and the item-level content validity index (I-CVI) ranged from 0.913 to 0.967. 0.728. The questionnaire's level content validity index (S-CVI) was 0.886, and the item level content validity index (I-CVI) ranged from 0.913 to 1.00. Conclusion: The questionnaire on knowledge, attitude and practice of blood oxygen saturation management in mechanically ventilated patients demonstrates good reliability and validity. It may serve as an assessment tool for intensive care unit nurses regarding their knowledge, attitude, and practices concerning blood oxygen saturation management in mechanically ventilated patients, thereby establishing a foundation for developing targeted intervention strategies in future practice.

阅读与讨论 → 访问原文 →

05.

arXiv (CS.CL) 2026-06-18 DOI: arXiv:2606.19005

Sumi: Open Uniform Diffusion Language Model from Scratch

作者:

Mengyu Ye↗Keito Kudo↗Wataru Ikeda↗Ryosuke Matsuda↗Keisuke Sakaguchi↗Jun Suzuki↗

Diffusion models have become a promising alternative to autoregressive models. Among these, uniform diffusion language models (UDLMs) permit any token to be updated at any step, in principle enabling more flexible generation. However, no UDLM has yet been pretrained from scratch at both large parameter scale and large token budget. Both autoregressive modeling and masked diffusion modeling already have capable models at scale that the community can study and build on; uniform diffusion has none. A scratch-pretrained UDLM at scale would provide a clean reference point for studying scaling behavior, generation dynamics, controllability, and trade-offs against established autoregressive and masked diffusion models. To this end, we introduce Sumi ("ink" in Japanese), a fully open 7B uniform diffusion language model pretrained from scratch on 1.5T tokens. Sumi performs competitively with autoregressive models trained at comparable token budgets on knowledge, reasoning, and coding benchmarks, while under-performing on commonsense benchmarks, where our education-heavy data mixture is a likely contributor. We release our model weights, checkpoints, and full training recipe, including a complete specification of the data mixture over publicly available corpora. We hope this release enables the community to study native uniform diffusion at scale and catalyzes work on its as-yet poorly understood aspects.

阅读与讨论 → 访问原文 →

06.

arXiv (CS.CV) 2026-06-16 DOI: arXiv:2606.16082

Tool-IQA: Augmenting Image Quality Assessment with Simple Tools

作者:

Guanyi Qin↗Junjie Zhang↗Chunming He↗Yibing Fu↗Jie Liang↗Tianhe Wu↗Lei Zhang↗

Vision-Language Models (VLMs) have been increasingly adopted for Image Quality Assessment (IQA). However, current methods typically employ a static one-shot scoring paradigm, despite the fact that humans assess image quality through dynamic visual inspection, e.g., selectively adjusting views to verify details and subtle artifacts. Specifically, relying solely on a single-pass observation introduces two primary limitations: first, perceiving the image only at a global scale restricts the assessment of finer local details; second, the original intensity distribution of the image may overwhelm the visibility, leading to insufficient inspection of image quality. To address these issues, we propose Tool-IQA, shifting the assessment mechanism from passive scoring to a tool-augmented workflow. In particular, we equip VLMs with simple yet effective view tools: a Magnifier to inspect local details, and a Gamma Corrector to uncover visibility and hidden artifacts. The assessment follows a structured pipeline that consists of an initial observation with rubric notes, a tool-augmented in-depth inspection, and a final quantification for calibrated quality score. Furthermore, to ensure efficient and purposeful tool callings, we introduce a batch-aware training strategy to reward tool interactions that can yield positive contributions rather than simply encouraging usage. Experiments on a variety of IQA benchmarks demonstrate that, with effective tool calling and calibrated assessment, our proposed Tool-IQA significantly outperforms existing state-of-the-art models, e.g., it achieves a PLCC of 0.854 on the challenging CLIVE dataset.

阅读与讨论 → 访问原文 →

07.

arXiv (CS.LG) 2026-06-11 DOI: arXiv:2606.11348

SwiftCTS: Fast Cross-Design Prediction and Pareto Optimization of Clock Tree Metrics via Few-Shot Calibration

作者:

Barsat Khadka↗Kawsher Roxy↗Md Rubel Ahmed↗

arXiv:2606.11348v1 Announce Type: new Abstract: Clock Tree Synthesis (CTS) is a computationally expensive stage in the physical design flow, requiring iterative EDA tool invocations to navigate a vast configuration space for optimal power, wirelength, and timing skew. Existing machine learning approaches require computationally expensive retraining or fine-tuning cycles to adapt to unseen macro architectures and are architecturally mismatched to the millions of evaluations demanded by exhaustive combinatorial search. We present SwiftCTS, a physics-informed surrogate framework that addresses both limitations simultaneously. By coupling lightweight, physics-grounded statistical features with gradient-boosted ensembles, SwiftCTS trains in under five seconds on a CPU and delivers sub-millisecond inference without GPU support. To handle out-of-distribution (OOD) designs without retraining or fine-tuning, we introduce a K-shot multiplicative calibration mechanism that anchors predictions to just one or two physical reference runs, reducing power prediction error from 24.5\% to 3.3\% and wirelength error from 56.6\% to under 1\% on unseen macros. Integrating this engine with an evolutionary optimizer, SwiftCTS evaluates 100,000 CTS configurations in under ten seconds, yielding Pareto-optimal frontiers that are physically validated within the OpenROAD flow. Closed-loop validation confirms prediction errors below 0.5\% for power and wirelength, and timing skew predictions within five picoseconds on an OOD benchmark, consistently outperforming default tool heuristics across all target metrics. Code publicly available at: \href{https://anonymous.4open.science/r/SwiftCTS-7E6E}{https://github.com/BarsatKhadka/SwiftCTS}

阅读与讨论 → 访问原文 →

08.

arXiv (CS.LG) 2026-06-19 DOI: arXiv:2606.20443

Topological Data Analysis for High-Dimensional Dynamic Process Monitoring

作者:

Angan Mukherjee↗Tyler A. Soderstrom↗Michael J. Kurtz↗Victor M. Zavala↗

arXiv:2606.20443v1 Announce Type: cross Abstract: Real-time process monitoring requires methods that extract actionable information from high-dimensional time-series data. In this work, we present a new approach for process monitoring that combines tools of topological data analysis (TDA) and machine learning. In the proposed approach, we represent multivariate time-series data as manifolds and use topological descriptors to summarize the structure of such data; we then use a neural ordinary differential equation to learn the dynamic evolution of the topological structure of the system. Using real data from an industrial process, we show that this trajectory-based event detection approach is effective at detecting diverse types of events. We contrast this approach against reconstruction-based approaches such as principal component analysis and autoencoders and against a trajectory-based approach that uses Koopman autoencoders.

阅读与讨论 → 访问原文 →

09.

arXiv (CS.CV) 2026-06-16 DOI: arXiv:2606.16180

To forget is to preserve: Machine Unlearning for 3D medical image segmentation

作者:

Nitesh Kumar Singh↗Akhilesh Singh↗Arjun Arora↗

With new data privacy laws such as the General Data Protection Regulation (GDPR) [1] that allow individuals to ask that any of their personal information be erased from trained machine learning models, there has been a push to investigate the unlearning of data from models as a way to comply with these laws. In this regard, based on four mechanics, we consider several approximate unlearning strategies applied to the MRBrainS18 dataset [2]. We use a 3D ResNet-50 [3] as a backbone architecture for segmentation that has been pre-trained with the Med3D framework [4]. Considering the pre-trained model as a baseline, we evaluate respective retention accuracy on 2 types of subjects, i.e., retain and forget. We assess these approaches through their Dice similarity coefficient and mean absolute error (MAE) values using two separate training horizons 20 and 50 epochs. The results show that the Noisy Label strategy had the best overall trade-off with a decrease of 93% in the forget set while maintaining 84% accuracy for the retained set after 50 epochs. All other strategies showed extreme levels of forgetting at higher epoch numbers while also demonstrating catastrophic degradation of their retain set performance. The results of this study provide a strict baseline of performance metrics for unlearning on a subject-specific level and provide practitioners with clear criteria for selecting the proper strategies.

阅读与讨论 → 访问原文 →

10.

arXiv (CS.AI) 2026-06-15 DOI: arXiv:2506.14202

DiffusionBlocks: Block-wise Neural Network Training via Diffusion Interpretation

作者:

Makoto Shing↗Masanori Koyama↗Takuya Akiba↗

arXiv:2506.14202v4 Announce Type: replace-cross Abstract: End-to-end backpropagation requires storing activations throughout all layers, creating memory bottlenecks that limit model scalability. Existing block-wise training methods offer means to alleviate this problem, but they rely on ad-hoc local objectives and remain largely unexplored beyond classification tasks. We propose $DiffusionBlocks$, a principled framework for transforming transformer-based networks into genuinely independent trainable blocks that maintain competitive performance with end-to-end training. Our key insight leverages the fact that residual connections naturally correspond to updates in a dynamical system. With minimal modifications to this system, we can convert the updates to those of a denoising process, where each block can be learned independently by leveraging the score matching objective. This independence enables training with gradients for only one block at a time, thereby reducing memory requirements in proportion to the number of blocks. Our experiments on a range of transformer architectures (vision, diffusion, autoregressive, recurrent-depth, and masked diffusion) demonstrate that DiffusionBlocks training matches the performance of end-to-end training while enabling scalable block-wise training on practical tasks beyond small-scale classification. DiffusionBlocks provides a theoretically grounded approach that successfully scales to modern generative tasks across diverse architectures. Code is available at https://github.com/SakanaAI/DiffusionBlocks .

阅读与讨论 → 访问原文 →

11.

arXiv (CS.AI) 2026-06-12 DOI: arXiv:2606.12423

The Challenges of Balancing AI Compliance and Technological Innovations in Critical Sectors: A Systematic Literature Review

作者:

Ayush Enkhtaivan↗Chinazunwa Uwaoma↗

arXiv:2606.12423v1 Announce Type: cross Abstract: The rapid integration of artificial intelligence (AI) into critical infrastructure including healthcare, finance, energy, and defense, offers transformative benefits but also conflicts with evolving regulatory and governance frameworks. This paper presents a systematic literature review (SLR) to examine the challenges of balancing AI compliance and technological innovation across critical infrastructure sectors. The review follows established SLR guidelines to extract and synthesize insights from peer-reviewed articles, report, and institutional sources published between 2020-2025. The study identifies three interrelated challenges: fragmented regulations, excessive compliance burdens for smaller to medium enterprises (SMEs), and misaligned governance models. To address these challenges, the study highlights practical governance strategies, including risk-tiered regulation, compliance by design, and explainable AI, to support scalable and trustworthy AI deployment in critical sectors. Key contributions include a concise mapping of core AI-governance challenges and a conceptual diagram illustrating their overlap, as well as actionable strategies for policymakers and practitioner to harmonize oversight with innovation.

阅读与讨论 → 访问原文 →

12.

arXiv (CS.AI) 2026-06-17 DOI: arXiv:2606.17781

MIVE: A Minimalist Integer Vector Engine for Softmax LayerNorm and RMSNorm Acceleration

作者:

Kosmas Alexandridis↗Giorgos Dimitrakopoulos↗

arXiv:2606.17781v1 Announce Type: cross Abstract: The rapid growth of Large Language Models (LLMs) has intensified the need for specialized hardware accelerators that can satisfy stringent inference latency and power constraints. Although matrix multiplications dominate the overall computational workload, non-linear vector normalization operations, such as LayerNorm, RMSNorm and Softmax can become critical hardware bottlenecks. Existing accelerators typically implement these functions using dedicated hardware blocks, leading to duplicated resources and inefficient silicon utilization. To address this limitation, we propose a Minimalist Integer Vector Engine (MIVE), a programmable architecture capable of executing all three operations within a unified datapath. By exploiting common computational patterns across LayerNorm, RMSNorm and Softmax the proposed vector engine maximizes hardware sharing while reducing implementation overhead. Physical ASIC implementation results show that MIVE provides comprehensive multi-function support while achieving higher area and hardware efficiency than most state-of-the-art standalone accelerators.

阅读与讨论 → 访问原文 →

13.

arXiv (quant-ph) 2026-06-12 DOI: arXiv:2606.12636

Quantum Stochastic Inflation

作者:

Robson Christie↗Jaewoo Joo↗Greg Kaplanek↗Vincent Vennin↗David Wands↗

arXiv:2606.12636v1 Announce Type: cross Abstract: We formulate stochastic inflation in an open quantum system framework. The field coarse-grained in a patch of fixed physical size, and the total momentum of that patch, form a canonical pair and act on a one-mode Fock space which we identify as the "bulk". At each time step, new comoving modes join the coarse-grained patch and the bulk has to be redefined. This redefinition produces an entangled mode that is traced over, yielding a non-unitary evolution equation for the bulk's density matrix. For a free test field in de Sitter, one obtains GKLS dynamics, generated by an effective Hamiltonian and a single non-Hermitian Lindblad operator, hence diffusion and Hubble friction originate from the same quantum channel. The Wigner-Weyl transform of the GKLS equation leads to a Fokker-Planck equation for the Wigner function, which matches the one that applies to the classical phase-space distribution of stochastic inflation. We also provide several schemes under which one can unravel the GKLS dynamics into stochastic Schrodinger equations when continuous measurements of the decoupled mode are performed, making contact with Langevin formulations of stochastic inflation. In the light-field regime, an additional overdamped reduction can be performed by integrating out the momentum variable in the Wigner distribution, leading to Starobinsky's slow-roll Fokker-Planck equation. In that regime, the purity of the patch is strongly suppressed. In contrast, for heavy fields, field diffusion is suppressed and the coarse-grained patch remains close to a pure underdamped oscillator, which prevents a classical stochastic treatment.

阅读与讨论 → 访问原文 →

14.

arXiv (CS.LG) 2026-06-16 DOI: arXiv:2606.16990

Analytic Torsion and Spectral Gap Capture Persistent-Laplacian Performance

作者:

Jernej Grlj↗Aaron D. Lauda↗

arXiv:2606.16990v1 Announce Type: new Abstract: While persistent Laplacians (PL) offer a richer geometric representation of data than persistent homology, utilizing their full eigenspectrum for learning tasks is often hampered by high dimensionality and the ``varying length'' problem across different filtration scales. We propose a compact spectral representation that distills the persistent Laplacian into three mathematically grounded invariants: Betti numbers, the spectral gap, and analytic torsion. Across benchmark datasets including MNIST, QM-3D, and SKEMPI WT, we demonstrate that this reduced feature space captures the essential predictive signal of the full spectrum, and in some cases outperforms it, while significantly reducing computational overhead and preventing the noise introduced by higher-frequency eigenvalues. Our results suggest that these invariants provide a principled, fixed-length interface between spectral geometry and topological learning.

阅读与讨论 → 访问原文 →

15.

arXiv (CS.CV) 2026-06-18 DOI: arXiv:2606.18429

CAOA – Completion-Assisted Object-CAD Alignment

作者:

Hiranya Garbha Kumar↗Minhas Kamal↗Balakrishnan Prabhakaran↗

Accurately aligning CAD models to their corresponding objects in indoor RGB-D scans is a central challenge in 3D semantic reconstruction. The task requires estimating a 9-Degree-of-Freedom (DoF) pose-position, rotation, and scale along three axes-but is hindered by noisy and incomplete scans, as well as segmentation errors that cause geometric distortions. We present Completion-Assisted Object-CAD Alignment (CAOA), a method that integrates a semantically and contextually aware point cloud completion module with a symmetry-aware relative pose estimation algorithm, enabling precise alignment of CAD models to scanned objects. Existing completion methods are typically trained and evaluated on synthetic datasets, which often fail to generalize to real-world scans. To bridge this gap, we introduce a synthetic data generation strategy tailored to indoor scenes, significantly reducing the synthetic-to-real domain gap-validated through quantitative comparisons with widely used completion datasets. In addition, we release S2C-Completion, an expert-annotated dataset of over 8,500 object-CAD pairs from Scan2CAD, created for real-world indoor single-object completion and intended as a new benchmark for this task. For object-CAD alignment, we incorporate symmetry information via a symmetry-aware loss, improving robustness to symmetric ambiguities. On the Scan2CAD benchmark, CAOA achieves a 17% accuracy improvement over state-of-the-art methods.

阅读与讨论 → 访问原文 →

16.

arXiv (CS.CV) 2026-06-15 DOI: arXiv:2503.19947

Vanishing Depth: Training Generalized Depth Adapters with Sinusoidal Depth Preprocessing for Pretrained RGB Encoders

作者:

Paul Koch↗J\"org Kr\"uger↗

Generalized metric depth understanding is critical for precise vision-guided robotics, which current state-of-the-art (SOTA) vision-encoders do not support. To address this, we propose a self-supervised training approach that extends pretrained RGB encoders with a depth adapter to incorporate and align metric depth into a combined latent space without interfering with the pretrained RGB feature extraction. In combination with our sinusoidal depth encoding, the depth adapter enables generalized and robust depth density and distribution invariant feature extraction. Our depth adapters improve a wide set of generalized RGB baselines across a spectrum of relevant RGBD downstream tasks in segmentation, pose estimation, and depth completion – without the necessity of finetuning. Most importantly, we achieve 56.05 mIoU in the SUN-RGBD segmentation, while outperforming SOTA depth-aware and multi-modal encoders in our experiments. When no depth is present, one can activate our depth adapter with an empty map, use single pixel depth clues, or monocular depth estimation to include the depth aware feature extraction into subsequent downstream tasks.

阅读与讨论 → 访问原文 →

17.

arXiv (CS.AI) 2026-06-17 DOI: arXiv:2606.17915

Trustworthy Self-Composable Big-Data-as-a-Service: An LLM-Orchestrated Multi-Agent Framework for Automated Data Engineering, AutoML, MLOps Deployment, and Drift-Aware Lifecycle Optimization

作者:

Aueaphum Aueawatthanaphisut↗Badri Raj Lamichhane↗

arXiv:2606.17915v1 Announce Type: cross Abstract: Big-Data-as-a-Service (BDaaS) platforms require re liable automation across data ingestion, cleaning, feature engi neering, model development, deployment, and post-deployment monitoring. However, existing LLM-based data science agents and AutoML systems mainly focus on isolated workflow stages, leaving limited support for lifecycle-level orchestration, artifact governance, human oversight, and drift-aware adaptation. This paper proposes a trustworthy self-composable BDaaS frame work based on LLM-orchestrated multi-agent collaboration. The proposed architecture decomposes the BDaaS lifecycle into specialized agents for data ingestion, data cleaning, feature engineering, AutoML training, model evaluation, MLOps de ployment, monitoring, and drift detection. A central LLM or chestration layer coordinates agent execution, validates interme diate outputs, manages workflow context, and enables dynamic workflow composition. The framework also incorporates shared artifact governance, reproducibility support, human-in-the-loop checkpoints, and drift-aware feedback loops. A prototype-based evaluation is conducted using controlled tabular benchmark datasets with missing values, categorical variables, outliers, class imbalance, and simulated covariate drift. Compared with manual ML, AutoML-only, and single-agent LLM baselines, the pro posed multi-agent BDaaS pipeline achieves competitive predictive performance while improving lifecycle-level reliability, including workflow completion, artifact traceability, deployment readiness, reproducibility, and drift recovery. The results suggest that LLM-orchestrated multi-agent systems can extend conventional AutoML toward trustworthy, adaptive, and production-oriented BDaaS lifecycle automation.

阅读与讨论 → 访问原文 →

18.

arXiv (CS.AI) 2026-06-11 DOI: arXiv:2606.11675

Lung-R1: A Knowledge Graph-Guided LLM for Pulmonary Diagnostic Reasoning

作者:

Haoyang Zeng↗Yuanxi Fu↗Rongzhen Li↗Yuming Yang↗Xiao Sun↗Jingwang Huang↗Gujie Shao↗Guohui Xiang↗Quan Lu↗Dongfan Ye↗Xuetao Chen↗Jiang Zhong↗…

arXiv:2606.11675v1 Announce Type: new Abstract: Diagnosing pulmonary diseases requires integrating heterogeneous evidence amid phenotypic variability and cross-disease overlap. Although large language models (LLMs) have shown progress on pulmonary knowledge question answering (QA) and information-processing tasks, reliable pulmonary diagnosis requires patient-specific, relation-aware reasoning over electronic medical record (EMR) evidence rather than isolated knowledge recall. We define this gap between pulmonary knowledge and case-level diagnostic reasoning as the Pulmonary Knowledge-to-Diagnosis Gap. To address it, we introduce LungKG, the first structured pulmonary knowledge graph for diagnostic knowledge organization and record-grounded reasoning. LungKG contains 59,038 nodes and 164,308 edges across 15 entity types and 112 relation types, serving as both a reusable pulmonary knowledge resource and the foundation for LungKG-guided model adaptation. Built on LungKG, we propose Lung-R1, a LungKG-guided pulmonary LLM trained through KG-constrained reasoning-chain construction and KG-guided reinforcement learning. In a 20-system evaluation, Lung-R1-14B achieves state-of-the-art performance across Choice, Pulmonary-QA, and EMR Diagnosis, reaching an EMR Diagnosis score of 4.3583 and surpassing the strongest non-Lung-R1 baseline by 0.1476 points. These results demonstrate the value of LungKG-guided training for EMR-based pulmonary diagnosis.

阅读与讨论 → 访问原文 →

19.

arXiv (CS.CL) 2026-06-16 DOI: arXiv:2606.16560

The BD-LSC Dataset: Facilitating the Benchmarking of Models for Lexical Semantic Change Detection in Slang and Standard Usage

作者:

Afnan Aloraini↗Viktor Schlegel↗Goran Nenadic↗Riza Batista-Navarro↗

Automatic semantic change detection aims to identify how word meanings shift over time, offering insights into both linguistic and societal change. Despite recent progress in computational lexical semantic change (LSC), existing benchmarks and methods struggle to capture bi-directional semantic change, particularly cases where words simultaneously gain and lose senses. This problem is especially challenging for words that have both slang and standard meanings. To address these gaps, we introduce two complementary benchmark datasets. The Bi-Directional Lexical Semantic Change (BD-LSC) dataset captures sense gain, sense loss, and stability across three time periods, enabling the study of complex semantic trajectories. The SlangTrack Word Sense Disambiguation (ST-WSD) dataset provides fine-grained, instance-level sense annotations for words combining slang and standard usages, supporting systematic benchmarking of WSD and semantic change detection models. Using these benchmarks, we systematically evaluate models across different methodological families: unsupervised clustering using contextualised embeddings, supervised machine learning, transformer-based models, and state-of-the-art large language models. Among the evaluated systems, the few-shot GPT-4o model achieved the strongest aggregate performance on Exact Sense Match (ESM) and multi-label accuracy; however, Macro-F1 scores near 0.5 across all systems show that rare slang senses remain difficult, which we identify as the central open challenge.

阅读与讨论 → 访问原文 →

20.

arXiv (CS.AI) 2026-06-17 DOI: arXiv:2605.23733

Any2Any: Efficient Cross-Embodiment Transfer for Humanoid Whole-Body Tracking

作者:

Ming Yang↗Tao Yu↗Feng Li↗Hua Chen↗

arXiv:2605.23733v2 Announce Type: replace-cross Abstract: Whole-body tracking (WBT) models have become a key foundation for humanoid robots, enabling them to imitate diverse motions with high fidelity. Training such models from scratch requires large-scale data and computation, making rapid deployment on new humanoid platforms costly. This raises a natural question: Can pretrained WBT models transfer across embodiments with minimal adaptation? To answer this question, we propose Any2Any, a paradigm that efficiently transfers an existing WBT specialist to a new humanoid embodiment with only a small amount of data and compute. Any2Any first performs kinematic alignment between source and target humanoids, aligning their input and output spaces so that the pretrained source policy can be meaningfully reused on the target embodiment.Any2Any then performs dynamics adaptation by applying lightweight parameter-efficient fine-tuning (PEFT) components to selected dynamics-sensitive modules, preserving useful behavioral priors while enabling targeted adaptation to the target robot. Extensive experiments on multiple humanoid platforms and pretrained backbones show that Any2Any substantially accelerates convergence and reduces training cost compared with training from scratch, while achieving competitive or superior tracking performance. Notably, using only 1% of the compute and data required for full training, Any2Any successfully transfers Sonic models pre-trained on Unitree G1 to LimX Oli and LimX Luna. These results suggest that pretrained WBT specialists can be efficiently reused across embodiments, providing a scalable path toward deploying humanoid whole-body control on new robots.

阅读与讨论 → 访问原文 →

21.

arXiv (quant-ph) 2026-06-12 DOI: arXiv:2606.13052

Simple analytical flux-tuned iSWAP pulses for leakage suppression

作者:

Dimitrios Georgiadis↗Boxi Li↗Asier Galicia↗Rami Barends↗F. A. C\'ardenas-L\'opez↗Felix Motzoi↗

arXiv:2606.13052v1 Announce Type: new Abstract: Fast, high-fidelity two-qubit gates are a key requirement for fault-tolerant quantum computation. Tunable coupler architectures provide a flexible approach for implementing entangling gates through flux control with large on-off ratios, but fast flux modulation can induce diabatic transitions and population leakage to non-computational states, limiting gate performance. Here we present an analytical flux control method enabling derivative removal by adiabatic gate ($\Phi$-DRAG) for suppressing leakage in flux tunable two-qubit gates. We show that $\Phi$-DRAG differs fundamentally from conventional microwave implementations and derive modified flux modulation protocols that suppress leakage below $10^{-4}$ for fast entangling gates. The method remains effective across a range of asymmetry between qubit anharmonicities and different circuit parameters, enabling high-fidelity two-qubit gates within the fifteen nanosecond range.

阅读与讨论 → 访问原文 →

22.

arXiv (CS.CL) 2026-06-12 DOI: arXiv:2606.13680

Learning to Reason by Analogy via Retrieval-Augmented Reinforcement Fine-Tuning

作者:

Zilin Xiao↗Qi Ma↗Chun-cheng Jason Chen↗Xintao Chen↗Avinash Atreya↗Hanjie Chen↗Vicente Ordonez↗

Retrieval-augmented generation (RAG) has become a standard mechanism for grounding language models in external knowledge, yet conventional retrieval based on lexical or semantic similarity is poorly suited for complex reasoning tasks: a semantically similar problem may demand an entirely different solution strategy, while a superficially different problem may share the same underlying reasoning pattern. We propose Retrieval-Augmented Reinforcement Fine-Tuning (RA-RFT), a post-training framework that teaches language models to reason by analogy. RA-RFT uses gold-relevance distillation to train a retriever that ranks contexts by expected reasoning benefit rather than semantic overlap, and then fine-tunes the policy model via reinforcement fine-tuning methods with retrieved analogous demonstrations, so the model learns to leverage reasoning traces under verifiable outcome rewards. We further analyze the diversity of retrieved contexts and find that reasoning-aware retrieval surfaces complementary solution strategies that provide distinct reasoning scaffolds for individual problems. Across challenging mathematical reasoning benchmarks, RA-RFT consistently outperforms standard reinforcement fine-tuning methods. For example, it improves AIME 2025 average@32 accuracy by 7.1 and 2.8 points over GRPO for Qwen3-1.7B and Qwen3-4B respectively – suggesting that reasoning-aware retrieval is a complementary axis of improvement and orthogonal to advances in reward design or training curricula.

阅读与讨论 → 访问原文 →

23.

arXiv (quant-ph) 2026-06-17 DOI: arXiv:2606.18084

Cavity-enhanced superconducting response in an underdoped cuprate

作者:

Angela Montanaro↗Vadim Plastovets↗Nitesh Khatiwada↗Jacopo Fiore↗Giacomo Jarc↗Abdullah Alabbadi↗Antonio Mastropasqua↗Enrico Maria Rigoni↗Shahla Y. Mathengattil↗Simone Dal Zilio↗Francesca Fassioli Olsen↗Fabio Novelli↗…

arXiv:2606.18084v1 Announce Type: cross Abstract: Superconductors carry electrical current without resistance when paired electrons condense into a coherent macroscopic quantum state. In underdoped cuprates, evidence suggests that pairing-related correlations and superconducting fluctuations can survive above the temperature at which global coherence is lost, pointing to phase fluctuations as a key limitation on superconductivity in this regime. Motivated by recent demonstrations of cavity-modified collective states in quantum materials, we investigate whether superconducting coherence can be stabilized by engineering the electromagnetic environment of the superconductor. We study an underdoped YBa$_2$Cu$_3$O$_{7-\delta}$ thin film in a tunable terahertz cavity formed with a semi-transparent gold mirror. From temperature-dependent terahertz transmission measurements, we find that the cavity enhances the superconducting response below the critical temperature, with an increase of the inferred superfluid weight. The effect becomes more pronounced at smaller cavity lengths and is accompanied by an upward shift of the superconducting onset temperature. Calculations based on a cavity-coupled model for phase-fluctuating superconductors capture these trends and support an interpretation in terms of cavity-enhanced phase stiffness. These results showcase the potential of cavity engineering for designing emergent functionalities in correlated systems.

阅读与讨论 → 访问原文 →

24.

Nature (Science) 2026-06-17 DOI: HASH:b14b875cbd86cb1d883a32150ada8739

Revealing competitive interfacial reactions in high-energy Li–S batteries

作者:

Shiyuan Zhou↗

Charge transfer at solid–liquid interfaces plays a critical role in various energy-storage systems1, particularly under dynamically varying reactant concentrations. Deciphering these intricate reaction pathways remains a substantial challenge, notably in lithium–sulfur (Li–S) batteries, in which achieving high energy density requires efficient conversion of highly concentrated lithium polysulfides (LiPSs)2,3. However, the mechanisms governing lithium sulfide (Li2S) deposition and dissolution under lean electrolyte conditions remain poorly understood. Here, using in situ liquid-cell electron microscopy, we directly visualize concentration-driven phase segregation at the electrode–electrolyte interface. Within these high-concentration interfacial layers (HCILs), competitive surface and solution dictate the charge-transfer dynamics and ultimately govern Li2S deposition at different phase boundaries. Density functional theory (DFT) calculations reveal that the aggregation of LiPSs alters molecular geometry, electronic properties and orbital hybridization, collectively facilitating charge transfer through highly concentrated LiPSs clusters. Guided by these insights, we design optimized electrodes that balance interfacial reaction pathways, enabling fast charging (4 C, 26.8 mA cm−2) and achieving high energy densities exceeding 400 Wh kg−1. These findings provide mechanistic understanding of interfacial reactions under practical working conditions and offer a design strategy to advance Li–S batteries. Visualization of concentration-driven phase segregation within high-concentration interfacial layers in the context of high-energy lithium–sulfur batteries using liquid-cell electrochemical transmission electron microscopy reveals competitive interfacial reactions under lean electrolyte conditions at different phase boundaries.

阅读与讨论 → 访问原文 →

25.

arXiv (math.PR) 2026-06-17 DOI: arXiv:2509.15049

How long does it take to train an Elephant Random Walk

作者:

Zheng Fang↗

arXiv:2509.15049v2 Announce Type: replace Abstract: We study how conditioning on the first $k$ steps, which we think of as training, affects the long-term behavior of the Elephant Random Walk. When the elephant is conditioned to be at position $k$ at time $k$, the first return time to the origin scales as $k^{(4-4p)/(3-4p)}$ in the diffusive regime, and grows exponentially in the critical regime. We loosely interpret this as a measurement of the rate at which the elephant forgets its training.

阅读与讨论 → 访问原文 →