Academic Intelligence · Curated Daily

探索全球前沿学术脉络

AcademicHub 汇聚顶级期刊与预印本平台的实时文献。定制您的专属科研雷达,利用大语言模型自动生成交叉领域文献分析简报。

01.
arXiv (CS.AI) 2026-06-11

Using Explainability as a Training-Time Reliability Signal for Efficient ECG Classification

arXiv:2606.12252v1 Announce Type: cross Abstract: Training deep neural networks for clinical time-series analysis is computationally demanding, yet many healthcare settings lack the resources required for repeated model development and deployment. This challenge is particularly evident in electrocardiogram classification, where large datasets and long training schedules make efficiency practically important. Progressive Data Dropout reduces training cost by excluding samples from gradient updates once they are learned, but it relies on model confidence and may retain samples that are difficult due to noise or ambiguity rather than useful signal. In this work, we introduce ERTS, an explainability-based reliability training signal for efficient ECG classification. ERTS uses explanation quality during training to distinguish between informative and unreliable uncertainty. Building on progressive data selection, we compute Grad-CAM attention maps for candidate samples and derive a focus score that measures whether model predictions are supported by coherent and localised patterns. Samples with low focus are filtered out, while those with meaningful attention are prioritised for gradient updates. We evaluate ERTS across three ECG datasets and multiple backbone architectures, showing consistent improvements in macro-F1 alongside reduced effective training cost. These results suggest that explanation quality can serve as a practical signal for improving both efficiency and reliability in clinical time-series learning. Code will be released.

02.
arXiv (CS.CL) 2026-06-16

Creative Collision: Directorial Persona Steering and Competition in Large Language Models

Activation steering has emerged as a powerful tool for shaping the behaviour of large language models at inference time, yet most prior work injects a single semantic direction into the residual stream. We study the richer setting in which two semantically opposing steering vectors are superimposed – a regime we call Creative Collision. Concretely, we construct directorial persona vectors for Steven Spielberg (optimistic, redemptive moral valence) and Martin Scorsese (dark, morally ambiguous) via mean-difference activation contrast on curated screenplay-derived corpora, then interpolate between them with a scalar mixing parameter $\alpha \in [0,1]$ and a steering coefficient $\lambda$. Across five evaluation axes – moral valence, generation coherence, surface style, directional dominance, and vector geometry – three principal findings emerge: (i)~Spielberg's representational signature exhibits robust directional dominance, suppressing Scorsese's moral influence across almost the entire interpolation range; (ii)~intermediate collision points paradoxically improve generation coherence relative to pure single-director steering at high $\lambda$; and (iii)~both personas localise maximally to layer~28 of a 40-layer decoder-only transformer, revealing a shared moral-tone substrate. These results illuminate the geometry of competing semantic directions in transformer residual streams and have direct implications for controllable creative generation and value-aligned narrative synthesis.

03.
arXiv (CS.AI) 2026-06-11

A Survey on Evaluating Quality and Trustworthiness in LLM-Generated Data

arXiv:2601.17717v3 Announce Type: replace Abstract: Large Language Models (LLMs) have emerged as powerful tools for generating data across various modalities. By transforming data from a scarce resource into a controllable asset, LLMs mitigate the bottlenecks imposed by the acquisition costs of real-world data for model training, evaluation, and system iteration. However, ensuring the high quality of LLM-generated synthetic data remains a critical challenge. Existing research primarily focuses on generation methodologies, with limited direct attention to the quality of the resulting data. Furthermore, most studies are restricted to single modalities, lacking a unified perspective across different data types. To bridge this gap, we propose the LLM Data Auditor framework. In this framework, we first describe how LLMs are utilized to generate data across six distinct modalities. More importantly, we systematically categorize intrinsic metrics for evaluating synthetic data from two dimensions: quality and trustworthiness. This approach shifts the focus from extrinsic evaluation, which relies on downstream task performance, to the inherent properties of the data itself. Using this evaluation system, we analyze the experimental evaluations of representative generation methods for each modality and identify substantial deficiencies in current evaluation practices. Based on these findings, we offer concrete recommendations for the community to improve the evaluation of data generation. Finally, the framework outlines methodologies for the practical application of synthetic data across different modalities.

04.
arXiv (CS.CL) 2026-06-12

Trait, Not State: The Durability of Reading Identity in Social Highlighting

Prior work on a social web highlighter located individuality in selection – which documents a person chooses to highlight – but measured it cross-sectionally. We ask the temporal question: is a reader's selection signature a trait or a state? We freeze each reader's first six months of highlighting as a profile and track its own-vs-other advantage on their later selections at growing gaps (to 24+ months), with negatives drawn from the same calendar era – so supply drift cannot masquerade as personal drift – at a coarse global level and at a fine level whose negatives and controls come from the reader's own interest neighborhood; the anchor cell reproduces the prior cross-sectional level (+0.188 vs +0.169), validating the harness. Four results. Within the same users, the fine-layer advantage shows no statistically detectable paired decline at any horizon (6-12 month retention R = 1.00 [0.85, 1.18], n = 212; the farthest bin is compatible with a modest decline; the only contrast whose interval excludes zero is the coarse layer at 12-24 months, about 13%). The signal is not reducible to repeated domains (~90% survives excluding all profile sources). Within-person drift is slow (a recent-half profile beats the old half by +0.042). Prospectively, personal profiles – even one built from a reader's earliest documents, median 20 months before evaluation – rank their next reads at roughly 3x the AP of every simple non-personal prior tested. We use "trait" operationally (a stable signature under continued engagement); the scope is heavy, long-tenured readers of one platform, and exposure is not separable from choice.

05.
arXiv (CS.AI) 2026-06-17

PreAct: Computer-Using Agents that Get Faster on Repeated Tasks

作者:

arXiv:2606.17929v1 Announce Type: new Abstract: Computer-using agents drive real software through the screen – clicking and typing – but they solve every task from scratch: asked to repeat a task, an agent re-reads the screen, re-reasons every tap, and pays the full cost again. We present PreAct, which lets such an agent get faster on tasks it has done before. The first time it succeeds, PreAct compiles the run into a small state-machine program-states that check the screen, transitions that act-and on later runs replays it directly instead of invoking the agent 8.5-13x faster, with no per-step language-model calls. Replay is not blind: at each step PreAct checks that the screen matches what the program expects before acting, and hands control back to the agent the moment something is off. PreAct applies the same discipline when deciding what to keep: a freshly compiled program enters the store only if, re-run from a clean state, an independent evaluator confirms it solved the task-catching programs that replay to their last step yet leave the task undone. Across a mobile, a desktop, and a web benchmark, this store-time check separates repeated runs that improve from ones that degrade as faulty programs accumulate, worth 1.75-2.6 tasks per benchmark, the same direction on all three; a fallback that explores afresh when no program fits brings PreAct level with a strong record-and-replay baseline. We also report what did not matter: prompt wording, runtime guardrails, and whether a language model or a plain embedding retriever selects which program to reuse.

06.
arXiv (CS.CV) 2026-06-15

Generation of Maximal Snake Polyominoes Using a Deep Neural Network

Maximal snake polyominoes are difficult to study numerically in large rectangles, as computing them requires the complete enumeration of all snakes for a specific rectangle size, which corresponds to a brute force algorithm. This hinders the study of maximal snakes in larger rectangles. Moreover, most enumerable snakes lie in small rectangles, obscuring large-scale patterns. In this paper, we investigate the contribution of a deep neural network to the generation of maximal snake polyominoes from a data-driven training, where the maximality and adjacency constraints are not encoded explicitly, but learned. To this extent, we experiment with a denoising diffusion model, which we referred as Structured Pixel Space Diffusion (SPS Diffusion). We find that SPS Diffusion generalizes from small rectangles to larger ones, generating valid snakes up to 28x28 squares and producing maximal snake candidates on squares close to the current computational limit. The model is, however, prone to errors such as branching, cycles, or multiple snake components. Overall, the diffusion model is promising and suggests that complex combinatorial objects can be understood by deep neural networks, which is useful in their investigation.

07.
arXiv (CS.LG) 2026-06-15

Efficient On-Device Diffusion LLM Inference with Mobile NPU

arXiv:2606.13740v1 Announce Type: new Abstract: Diffusion large language models (dLLMs) accelerate generation by denoising multiple tokens in parallel, making them attractive for latency-sensitive mobile inference. However, repeated denoising introduces substantial computation on smartphones. Mobile neural processing units (NPUs) offer high-throughput dense matrix computation, but efficiently exploiting them remains challenging: token commitment shrinks per-block effective workloads, token revision complicates KV cache reuse, and limited NPU-visible address space incurs costly remapping and data transfer overheads. In this paper, we propose llada.cpp, the first NPU-aware inference framework for accelerating dLLMs on smartphones. llada.cpp aligns block-wise dLLM inference with the execution characteristics of mobile NPUs through three techniques. (1) Multi-Block Speculative Decoding fills the shrinking workload in late-stage current-block decoding with speculative future-block tokens. (2) Dual-Path Progressive Revision keeps committed tokens revisable until stable and refreshes unstable tokens through a CPU-side path without stalling dense NPU execution. (3) Swap-Optimized Memory Runtime compacts NPU-visible address layouts and overlaps data staging with NPU computation to reduce remapping and transfer overheads. We implement llada.cpp as an end-to-end framework and evaluate it across diverse hardware platforms and dLLM workloads. llada.cpp reduces LLaDA-8B generation latency by 17x-42x over the CPU baseline with prefix KV cache reuse, while preserving generation quality.

08.
arXiv (CS.CV) 2026-06-11

PT-WNO: Point Transformer with Wavelet Neural Operator for 3D Point Cloud Semantic Segmentation

Point cloud semantic segmentation requires architectures that capture both fine-grained local geometry and broad global scene structure. Transformer-based networks have demonstrated strong performance by focusing on detailed local feature aggregation; however, global context is conveyed primarily through skip connections across encoder-decoder stages, which we argue is insufficient for full scene understanding. We hypothesize that augmenting skip connections with a learnable global feature extraction module allows the network to acquire scene-level knowledge before descending into local detail, leading to richer and more contextually grounded representations. To this end, we propose Point Transformer with Wavelet Neural Operato (PT-WNO), which integrates a shared Wavelet Neural Operator (WNO) branch alongside the skip connections of a point cloud transformer backbone. At each encoder-decoder transition, point features are projected onto a dense 3D volumetric grid where the WNO captures multi-scale global spectral context through learnable wavelet decomposition and reconstruction. These global features are fused back into the network via lightweight adapters, complementing rather than replacing the existing skip connections. Experiments on four large-scale 3D point cloud benchmarks demonstrate the effectiveness of PT-WNO. On S3DIS (Area 5), PT-WNO achieves 71.59% mIoU, outperforming the Point Transformer v3 (PTv3) baseline by +1.03 points. On DALES it achieves 81.05% mIoU (+1.47 over the baseline). On ScanNet~v2, PT-WNO obtains 76.19% mIoU, remaining competitive with the baseline (76.36%).

09.
arXiv (CS.AI) 2026-06-15

Dense Coordinate-List Fine-Tuning Induces a Controllable Interference Surface in Vision-Language Models

arXiv:2606.14507v1 Announce Type: new Abstract: Fine-tuning vision-language models to emit dense coordinate lists improves visual grounding but also changes how models serialize, repeat, and terminate structured outputs. We study this behavior as a generation and control surface. In Gemma 4 12B, high-capacity q/k/v/o LoRA raises class-aware F1@0.3 from 0.007 to 0.448 while inducing repeated-tail pressure (duplicate rate 0.080, max repeat 23). A q/v rank sweep keeps max repeat at 21-22 across ranks 4-64, showing capacity persistence. The target signal is separable: object-level repeat-stop removes exact repeated records (duplicate rate 0.000, max repeat 1) while preserving F1 (0.494 to 0.490) and stricter F1@0.5 (0.381 to 0.385). Structure-axis probes localize the effect to bbox-coordinate object lists; dense non-bbox and spatial/count JSON remain repeat-clean, including under high-capacity adapters. Qwen3-VL-8B reproduces a clean controlled endpoint (F1@0.3 0.318, duplicate rate 0.000), and COCO 2017 reproduces acquisition plus duplicate pressure. Dense coordinate-list adaptation therefore creates a structure-bound, cross-family interference surface that can be measured and controlled.

10.
arXiv (CS.CL) 2026-06-19

Learning to Prompt: Improving Student Engagement with Adaptive LLM-based High-School Tutoring

LLMs can personalize education, although current static-prompt tutoring systems struggle to adapt to diverse academic disciplines. We develop and test a system with subject-aware prompting, based on 14 pedagogical features (e.g., tutor scaffolding, student understanding) extracted from raw transcripts. We first train a prompt routing model in a simulation environment, and then deploy it for online adaptation with actual high-school students. The simulation benchmark shows the router outperforming two static baselines ($0.694$ vs. $0.647$ and $0.64$, $p

11.
PLOS Computational Biology 2026-06-05

Heuristic multi-site optimization for protein sequence design using Masked Protein Language Models

作者:

by Lijuan Wang, Yuze Wang, Chen Qiu, Liwei Xiao, Xianliang Liu, Junjie Chen Protein sequence design for tailored functional properties is a fundamental task in protein engineering, with critical applications in drug discovery and therapeutic development. Efficient navigation of the combinatorial vastness of protein sequence space to identify functional variants remains a formidable challenge. Conventional approaches, which predominantly rely on template-based local search or single-residue mutagenesis, are constrained by their susceptibility to local optima and their potential risk of destabilizing native structural stability. In this study, we introduce ProtHMSO, a heuristic multi-site optimization framework leveraging masked protein language models (ProtLMs) for context-aware sequence exploration. ProtHMSO mimics natural evolutionary mechanisms by employing ProtLM-derived substitution probabilities to guide heuristic searches for synergistic mutations, thereby constraining combinatorial search spaces through evolutionary and biophysical priors. ProtHMSO is further applied to replace the exploration strategies in genetic algorithms (GAs) and Monte Carlo tree search (MCTS) for improving their convergence efficiency. Benchmark experiments demonstrate that protein sequences generated by ProtHMSO exhibit superior functional performance and closer alignment with natural sequence distribution, compared with state-of-the-art methods. These advancements highlight that ProtHMSO has strong potential and compatibility to accelerate functional protein discovery, offering a robust framework for efficient and context-aware exploration of protein sequence space.

12.
arXiv (CS.LG) 2026-06-19

The Significance of Style Diversity in Annotation-Free Synthetic Data Generation

arXiv:2606.20400v1 Announce Type: new Abstract: Generating high-utility synthetic data for intent classification typically requires human-annotated seed data, which is often unavailable in fast-paced industrial settings. In this paper, we propose a framework for synthetic dialogue generation that works entirely without human-annotated data, relying solely on intent definitions. Our proposed dialogue generation framework utilizes two different types of topic and style attributes to improve data diversity. Also, we propose two novel post-hoc stylization models called Univ and Exam to transform synthetic LLM-generated utterances into more varied, human-like linguistic styles. To enhance data quality, we utilize an LLM-as-a-judge filtering process. Experimental results on both industrial and public datasets demonstrate that the proposed approach achieves up to 93.3% of the performance obtained using human-annotated training data. Crucially, the findings reveal that style diversity is more critical than topic diversity for synthetic data utility, as it prevents models from learning spurious stylistic correlations. Furthermore, the study shows that incorporating style attributes during the generation process is more effective than post-hoc style adaptation.

13.
Nature (Science) 2026-06-15

Nanocrystal-tailored recombination for all-perovskite tandem solar modules

作者:

The commercialization of all-perovskite tandem solar modules is hindered by the reliance on the conventional gold-based tunnel recombination junction (TRJ)1,2. Specifically, this TRJ introduces substantial near-infrared parasitic absorption3 and suffers from interfacial instability4, limiting both photocurrent generation and operational durability. Here, we develop a solution-processed interconnecting layer based on surface-engineered indium oxide (In2O3) nanocrystals featuring high optical transparency, wherein controlled nanocrystal morphology and tailored ligand chemistry enable smooth interfacial contact and favorable energy level alignment. Critically, we introduce a phosphonic acid additive into the lead–tin (Pb–Sn) perovskite precursor, which synergistically improves the electronic contact with the In2O3 recombination layer, thereby enhancing hole extraction. In addition, the additive regulates perovskite crystallization to mitigate residual strain during film formation, ensuring high-quality large-area deposits. This coordinated interfacial and crystallization engineering strategy simultaneously enhances carrier recombination efficiency at the interconnection layer, improves carrier extraction, and promotes large-area film uniformity in all-perovskite tandems. As a result, a 65-cm2 all-perovskite tandem solar module achieves a certified power conversion efficiency of 26.2%5, with an open-circuit voltage of 2.182 V, a fill factor of 77.4%, and a short-circuit current density of 15.6 mA cm-2 in terms of averaged subcell performance, measured by Japan Electrical Safety and Environment Technology Laboratories (JET). This marks a significant advance toward scalable perovskite tandem photovoltaics.

14.
arXiv (CS.CV) 2026-06-17

Mordal: Automated Pretrained Model Selection for Vision Language Models

Incorporating multiple modalities into large language models (LLMs) is a powerful way to enhance their understanding of non-textual data, enabling them to perform multimodal tasks. Vision language models (VLMs) form the fastest growing category of multimodal models because of their many practical use cases, including in healthcare, robotics, and accessibility. Unfortunately, even though different VLMs in the literature demonstrate impressive visual capabilities in different benchmarks, they are handcrafted by human experts; there is no automated framework to create task-specific multimodal models. We introduce Mordal, an automated multimodal model search framework that efficiently finds the best VLM for a user-defined task without manual intervention. Mordal achieves this both by reducing the number of candidates to consider during the search process and by minimizing the time required to evaluate each remaining candidate. Our evaluation shows that Mordal can find the best VLM for a given problem using $8.9\times$–$11.6\times$ lower GPU hours than grid search. We have also discovered that Mordal achieves about 69\% higher weighted Kendall's $\tau$ on average than the state-of-the-art model selection method across diverse tasks.

15.
arXiv (quant-ph) 2026-06-19

Single-Step Phase-Engineered Pulse for Active Readout Cavity Reset in Superconducting Circuits

arXiv:2512.08393v2 Announce Type: replace Abstract: In a circuit QED architecture, we experimentally demonstrate a hardware-efficient and qubit-state-dependent Single-Step Phase-Engineered (SSPE) pulse scheme for actively depopulating a readout cavity. The protocol appends a reset segment with tailored amplitude and phase to a standard square readout pulse. Within the linear-response regime, the optimal reset amplitude scales proportionally with the readout amplitude, while the optimal reset phase remains invariant, significantly simplifying the experimental calibration procedure. Time-resolved measurements of the cavity photon number dynamics demonstrate that the SSPE scheme significantly outperforms the CLEAR protocol in terms of reset speed. Crucially, this approach enables arbitrarily fast, overshoot-free depletion of the cavity photon population, with the ultimate reset rate constrained by the finite analog bandwidth of the measurement chain. Furthermore, a comprehensive evaluation of the QND nature demonstrates that the SSPE scheme introduces no additional non-QND measurement errors. It exhibits non-QNDness comparable to both the free-decay and CLEAR protocols, with residual errors predominantly governed by state switching induced by qubit relaxation during the readout process. Thses results establish the SSPE scheme as a practical and scalable approach for achieving rapid and smooth cavity reset in superconducting quantum circuits.

16.
arXiv (CS.LG) 2026-06-19

Score Approximation for Diffusion Models on Arbitrary Low-Dimensional Structures

arXiv:2606.19894v1 Announce Type: new Abstract: The remarkable success of score-based diffusion models has spurred significant efforts to establish their theoretical foundations. However, existing complexity bounds for score approximation rely heavily on restrictive assumptions like Lipschitz continuous densities or smooth manifold supports, which are routinely violated by the singularities, sharp boundaries, and disjoint clusters inherent to real-world perceptual data. This work establishes a universal score approximation theorem that works for any distribution supported on any compact set of upper Minkowski dimension $d$. Using a novel discrete-mixture formulation, we prove that the score function can be approximated with a ReLU network whose complexity grows exponentially only with $d$, thus breaking the exponential curse of ambient dimensionality. Combined with existing theories on accurately solving the backward diffusion SDE for arbitrary compact distributions, our work shows that diffusion models readily adapt to irregular, non-smooth data structures, explaining their competence in real-world generative tasks.

17.
arXiv (quant-ph) 2026-06-16

MAPS: A Novel Multi-Axial Projective Sphere for Geometrically Visualizing Higher d-Valued Quantum State-Space of Qudits

arXiv:2606.15801v1 Announce Type: new Abstract: Visualizing the d-valued quantum state-space of quantum systems serves as a foundational pillar for the scientific research and practical applications in quantum computing and information science, where d >= 2. The 2-valued quantum states of a qubit are elegantly visualized on the three-dimensional Bloch sphere. In contrast, expanding this geometrical paradigm to visualize higher d-valued quantum states of a qudit (d >= 3), e.g., a qutrit (d=3), ququadit (d=4), and quintit (d=5), leads to severe structural and topological complexities. This paper introduces a new generalized three-dimensional framework to effectively visualize higher d-valued quantum states of a qudit, in the aspects of ease of illustration, structural simplicity, and natural representation for researchers and engineers. We called this new framework the "multi-axial projective sphere (MAPS)", which consists of n projectional intersecting spatial axes, where d-1

18.
arXiv (CS.CV) 2026-06-15

CottonLeafVision: An Explainable and Robust Deep Learning Framework for Cotton Leaf Disease Classification

Globally, cotton is a highly economically beneficial crop, as the textile industry heavily depends on it. So, the precise identification and detection of cotton leaf disease is crucial for economic stability. The development goal of "CottonLeafVision" is to accurately classify and detect cotton leaf disease. With this goal, we have evaluated multiple pretrained Deep Convolutional Neural Networks, including DenseNet201, InceptionV3, and VGG19 on a publicly available cotton leaf disease image dataset. This image dataset includes seven classes, six disease classes, and one healthy class, collected under various field conditions reflecting real-world challenges. Among these pretrained models, with DenseNet201, we have achieved the highest classification accuracy of 98%. To enhance the model reliability and interpretability, we have implemented different techniques and methods such as Gradient-weighted Class Activation Mapping (Grad-CAM), occlusion sensitivity analysis and adversarial training to increase the noise resistance of the model. Finally, we have developed a prototype in order to utilize the model's capabilities on real life agriculture. This paper shows the deep learning model's capabilities to classify the disease in real-life cotton disease management situations.

19.
Nature (Science) 2026-06-10

Lignin to adipic acid in a high-yield chemical and biological redox process

Viable manufacturing pathways to produce bio-based chemicals from renewable feedstocks, such as lignin derived from plant biomass, are needed to decarbonize the chemicals manufacturing sector. Converting the recalcitrant lignin polymer to valuable bioproducts remains a longstanding challenge in biorefining, with the highest reported single-product yield from lignin currently around 20 wt% (refs. 1–4). Most existing lignin depolymerization strategies target aryl–ether bond cleavage, which can produce aromatic monomers in yields of only about 30 wt%, and still as complex mixtures with C–C-linked dimers and oligomers5,6. The recalcitrance of these C–C linkages between aromatic moieties fundamentally limits single-product yields from lignin, prompting the development of strategies to efficiently cleave these C–C bonds3,7–9. Here we show how reductive processing of lignin from poplar accesses a hydrocarbon mixture of alkyl-aromatic monomers and oligomers that is privileged for oxidative conversion to monomeric aromatic carboxylic acids, comprising mostly benzoic acid and phthalic acid isomers in up to 73 wt% monomer yields, using a Co/Mn/Br catalyst. The soil bacterium Pseudomonas putida KT2440 was engineered to convert this mixture of aromatic carboxylic acids to muconolactone, a precursor to bio-based nylons, enabling final adipic acid yields up to 26 wt% (gram adipic acid per gram lignin) with a maximum theoretical yield of 57 wt%. This pairing of reductive and oxidative steps with lignin resembles processes in petrochemical refining and shows how lignin may be converted into a single, valuable bioproduct in high yields. A chemical and biological redox process that resembles processes in petrochemical refining is used to convert lignin from poplar into a single, valuable bioproduct, adipic acid, in high yields.

20.
arXiv (CS.CV) 2026-06-11

SpecLoR: Spectral Lookahead Rectification for Motion-Coherent Text-to-Video Generation

Flow Matching has enabled robust text-to-video generation via latent ODE sampling. However, velocity approximation and numerical discretization errors inevitably accumulate, causing sampling trajectories to drift. Consequently, generated videos often suffer from severe spatiotemporal inconsistencies. Nevertheless, directly correcting these drifted, noisy latents is challenging: (i) timestep-dependent noise obscures reliable structural cues; (ii) spatial interventions risk disrupting intricate local geometry while incurring heavy computational costs. To address this, we propose Spectral Lookahead Rectification (SpecLoR), a plug-and-play inference method that bypasses noise via lookahead prediction, and circumvents spatiotemporal entanglement by shifting corrections to the frequency domain, where universal statistical priors of natural videos are readily available. First, during early sampling stages, SpecLoR looks ahead to estimate the clean latent $z_{t,0}$ and computes its 3D spatiotemporal spectrum. Next, SpecLoR rectifies the amplitude spectrum to match the prior, leaving the phase intact. Finally, the corrected state is re-noised to resume ODE integration. Experiments on Wan2.2 demonstrate that SpecLoR significantly reduces physical artifacts and enhances motion coherence across multiple benchmarks with minimal computational overhead (4 additional NFEs).

21.
arXiv (CS.AI) 2026-06-18

Target-confidence Recourse Using tSeTlin machines: TRUST

arXiv:2606.18832v1 Announce Type: cross Abstract: Counterfactual explanations are widely used to provide algorithmic recourse in high-stakes decision-making systems. Most existing methods seek the smallest change to an input that flips a model's decision. However, decision-makers often rely not only on predicted labels but also on confidence thresholds and risk margins. Counterfactuals that barely cross a decision boundary can be fragile and unstable under noise or model variation. In this paper, we propose Target-confidence Recourse Using tSeTlin machines (TRUST), a framework in which users explicitly specify the desired prediction confidence for recourse. Rather than generating counterfactuals and evaluating confidence afterward, TRUST directly searches for minimal changes that satisfy a user-defined confidence target, enabling comparison of recourse options in terms of cost, confidence, and robustness. We instantiate TRUST using a Probabilistic Tsetlin Machine (PTM) combined with Bayesian optimization. The probabilistic clause-based structure of PTM links prediction confidence to the stability of decision rules. We show that counterfactuals satisfying the same rules can still differ substantially in reliability depending on how securely they satisfy those rules, revealing whether decisions are supported by robust or fragile clause activations. Experiments on synthetic and real-world datasets demonstrate that target-confidence counterfactuals produce more robust and interpretable recourse than conventional boundary-based approaches. Across multiple benchmarks, TRUST achieves perfect robustness while maintaining low recourse cost, including an L2 distance of 0.10 on the Haberman dataset at 0.92 confidence. By explicitly controlling confidence and exposing rule-level stability, TRUST provides actionable recourse for high-stakes decision support.

22.
arXiv (CS.AI) 2026-06-19

Bi-Anchor Interpolation Solver for Accelerating Generative Modeling

arXiv:2601.21542v3 Announce Type: replace-cross Abstract: Flow Matching (FM) models have emerged as a leading paradigm for high-fidelity synthesis. However, their reliance on iterative Ordinary Differential Equation (ODE) solving creates a significant latency bottleneck. Existing solutions face a dichotomy: training-free solvers suffer from significant performance degradation at low Neural Function Evaluations (NFEs), while training-based one- or few-steps generation methods incur prohibitive training costs and lack plug-and-play versatility. To bridge this gap, we propose the Bi-Anchor Interpolation Solver (BA-solver). BA-solver retains the versatility of standard training-free solvers while achieving significant acceleration by introducing a lightweight SideNet (1-2% backbone size) alongside the frozen backbone. Specifically, our method is founded on two synergistic components: 1) Bidirectional Temporal Perception, where the SideNet learns to approximate both future and historical velocities without retraining the heavy backbone; and 2) Bi-Anchor Velocity Integration, which utilizes the SideNet with two anchor velocities to efficiently approximate intermediate velocities for batched high-order integration. By utilizing the backbone to establish high-precision ``anchors'' and the SideNet to densify the trajectory, BA-solver enables large interval sizes with minimized error. Empirical results on ImageNet-256^2 demonstrate that BA-solver achieves generation quality comparable to 100+ NFEs Euler solver in just 10 NFEs and maintains high fidelity in as few as 5 NFEs, incurring negligible training costs. Furthermore, BA-solver ensures seamless integration with existing generative pipelines, facilitating downstream tasks such as image editing.

23.
arXiv (quant-ph) 2026-06-11

Tensor-Network Algorithm for Many-Body Trace Norms

arXiv:2606.11882v1 Announce Type: new Abstract: Trace norms are fundamental to quantum information theory, yet in many-body systems their evaluation remains a major computational bottleneck, as it generally requires diagonalizing exponentially large operators. Here, we overcome this bottleneck by introducing a controlled tensor-network algorithm for estimating the trace norm of matrix product operators without full diagonalization. The key idea is to combine Zolotarev's rational approximation to the sign function with a variational formulation solved using a density-matrix-renormalization-group-like algorithm. The resulting approximation is systematically improvable, with its accuracy controlled by the rational approximation parameters and the spectral weight near zero. Beyond the reach of exact diagonalization, we demonstrate controlled trace-norm calculations for entanglement negativity, quantum fidelity and quantum Fisher information, achieving substantially improved accuracy over polynomial-based Lanczos approaches. Our results establish trace-norm-based quantities as practical tensor-network observables, opening a route toward tensor-network studies of quantum information in mixed states.

24.
arXiv (CS.CV) 2026-06-16

VANDERER: Map-Free Exploration using Future-Aware and Visual-Curiosity-Guided Diffusion Policy

Mobile agents require efficient exploration strategies to map unseen environments and autonomously plan tasks. Traditional methods rely on generating occupancy maps and optimizing the sequence in which unexplored regions are visited. However, in sensor-constrained settings, such as those limited to monocular cameras, generating accurate occupancy maps is challenging. To address this, we propose VANDERER, an exploration framework that leverages a Visual Curiosity Module (VCM) to guide pre-trained diffusion policies using only monocular image data. This curiosity module predicts the outcomes of proposed actions via a navigation world model and evaluates them through a curiosity cost. The cost then guides the diffusion process toward generating actions that maximize exploration. Evaluated across diverse simulated environments, VANDERER consistently outperforms established baselines, exploring an average of 13.4% more area than NoMaD. Our results reveal a direct correlation between visual and geometric curiosity in outdoor environments, demonstrating that VANDERER can effectively leverage this relationship for efficient exploration using sensor-constrained agents.

25.
PLOS Computational Biology 2026-06-08

Assessing the inference of single-cell phylogenies and population dynamics from CRISPR lineage recordings

by Julia Pilarski, Tanja Stadler, Sophie Seidel Multicellular organisms develop from a single cell by repeated rounds of cell division, differentiation, and death, which can be represented as a single-cell phylogenetic tree. Genetic lineage tracing allows us to investigate this development by tracking the ancestry of individual cells as populations grow and change over time. However, accurate reconstruction of the cell phylogeny and quantification of the corresponding phylodynamic parameters – cell division, differentiation, and death rates – from this tracking data remains challenging and needs to be systematically evaluated. We perform simulations and assess, using the Bayesian framework, the joint inference of time-scaled cell phylogenies and phylodynamic parameters from CRISPR lineage recordings with random or sequential edits. Principally, we characterize the inference improvements as the recorder capacity increases. We observe more accurate phylogenetic reconstruction from sequential compared to random recordings, but no substantial improvement in phylodynamic inference when using the additional information contained in the order of edits. Overall, we find that CRISPR lineage recordings carry a strong signal on the rates of cell division when appropriate models are used. However, we detect biases in the inferred rates of cell division and death under phylodynamic model misspecification, i.e., when fitting classic memoryless birth-death processes to synchronous cell divisions. Moreover, for scenarios when cells differentiate into distinct types, we demonstrate that Bayesian phylodynamic analysis of sparse end-point measurements can resolve these cell differentiation trajectories by lineage and time. Under prototypical dynamics, we recover cell type-specific division and death rates, and cell type transition rates in over 80% of simulations. Overall, this simulation study explores how much information on cellular development can be extracted from state-of-the-art genetic lineage tracing data using phylogenetic and phylodynamic methodology.