Academic Intelligence · Curated Daily

探索全球前沿学术脉络

AcademicHub 汇聚顶级期刊与预印本平台的实时文献。定制您的专属科研雷达,利用大语言模型自动生成交叉领域文献分析简报。

01.
medRxiv (Medicine) 2026-06-17

Diagnostic Concordance of Immediate Versus 1-Hour Technetium-99m Hydroxydiphosphonate Scintigraphy in Suspected Transthyretin Amyloid Cardiomyopathy

Background Bone-avid tracer myocardial scintigraphy for the diagnosis of transthyretin amyloid cardiomyopathy (ATTR-CM) has traditionally employed imaging at one or 3-hour intervals. Technetium-99m hydroxydiphosphonate (99mTc-HDP) has unique characteristics that may enable earlier imaging. We investigated the diagnostic concordance of immediate versus 1-hour acquisitions. Methods Consecutive patients with suspected ATTR-CM underwent planar imaging and SPECT/CT immediately and at 1-hour following the administration of 99mTc-HDP. Perugini grades and heart to contralateral lung (H/CL) ratios were assessed. Target-to-background ratios (TBRs) were calculated on the SPECT/CT acquisitions using the left ventricular (LV) septum and three background regions: aorta, LV blood-pool, and vertebrae. We assessed diagnostic concordance using Cohen's Kappa ({kappa}), temporal stability using paired t-tests, and correlation between timepoints using Pearson's coefficient (r). The 1-hour SPECT/CT interpretation served as the protocol reference standard. Results Forty-eight patients (83% male; median age, 80 [73-85] years) were evaluated. One-hour SPECT/CT identified 19 positive and 29 negative cases. Immediate SPECT/CT demonstrated 100% diagnostic concordance with the 1-hour reference standard ({kappa} = 1.000; 95% CI: 1.00 to 1.00; p < 0.001). The LV septum/LV Blood-Pool TBR showed the highest correlation (r = 0.956; 95% CI: 0.922 to 0.975; p < 0.001). The LV Septum/Aorta TBR demonstrated high correlation (r = 0.918; 95% CI: 0.857 to 0.953; p < 0.001) and remained stable in the ATTR-negative cohort (-0.02; 95% CI: -0.08 to 0.04; p = 0.54). Significant decrease in the LV Septum/Vertebrae TBR in the ATTR-negative (-0.55; 95% CI: -0.64 to -0.47; p < 0.001) and ATTR-positive cohorts (-1.14; 95% CI: -1.39 to -0.89; p < 0.001) was observed. Conclusions Immediate 99mTc-HDP SPECT/CT is diagnostically concordant with standard 1-hour protocols. By leveraging SPECT/CT and the favorable kinetics of 99mTc-HDP, immediate-phase imaging can accurately reproduce 1-hour acquisitions in cases of suspected ATTR-CM. This expedited approach may improve nuclear laboratory throughput and patient satisfaction.

02.
arXiv (CS.CL) 2026-06-11

UR-BERT: Scaling Text Encoders for Massively Multilingual TTS Through Universal Romanization and Speech Token Prediction

We propose UR-BERT, a Romanized transcription-based text-to-speech (TTS) encoder for massively multilingual TTS systems. Conventional grapheme-to-phoneme (G2P)-based approaches are limited to around 100 languages due to the availability of reliable G2P resources. In contrast, UR-BERT scales to 495 languages by unifying diverse writing systems into a shared Romanization representation. To further enhance phonetic fidelity and text-speech alignment, we introduce a speech token prediction objective during training, which encourages the encoder to learn speech-aware phonetic representations in a data-efficient manner. Experiments show that TTS systems built on UR-BERT consistently outperform recent text encoder baselines across a wide range of languages and resource conditions, and demonstrate strong generalization to unseen languages.

03.
arXiv (CS.AI) 2026-06-19

LLM Doesn't Know What It Doesn't Know: Detecting Epistemic Blind Spots via Cross-Model Attribution Divergence on Clinical Tabular Data

arXiv:2606.19509v1 Announce Type: new Abstract: Large language models (LLMs) are increasingly applied to structured clinical data, yet whether they can recognize the limits of their own knowledge on such tasks remains unexplored. We study this question through the lens of cross-model attribution divergence with the goal of reducing epistemic uncertainty for structured tasks, comparing Qwen 2.5 7B and XGBoost on a prediction task via attribution divergence analysis. We report four findings. First, LLM verbalized confidence is epistemically vacuous, it outputs a near-constant (0.856-0.937) regardless of whether accuracy is 49% or 75.3%, tracking prompt format rather than prediction quality. Second, the LLM exhibits an inverse difficulty effect: accuracy drops to 64.8% when XGBoost is 99% correct, but matches XGBoost (73.8% vs. 73.1%) when it is moderately uncertain. Third, few-shot examples and SHAP-derived feature evidence are orthogonal, super-additive interventions: they reduce the Attribution Disagreement Score (ADS) from 1.54 to 0.38 and improve accuracy from 49% to 75.3% without training. Fourth, a cross-model calibrator that determined LLM reliability using attribution divergence signals reduces expected calibration error from 0.254 to 0.080, replacing uninformative verbalized confidence with patient-specific reliability estimates, without accessing model internals or requiring repeated inference. We frame these findings as a cold start problem for LLMs on structured data and outline a path toward genuine epistemic self-awareness.

04.
arXiv (CS.CV) 2026-06-11

Semantic Segmentation of Node and Edge Diagrams for Assistive Technology

In this paper, we present a novel set of related models for semantic segmentation of node-link diagrams. These diagrams are frequently used to represent mathematical graphs, relationships between concepts, and flowcharts. Such diagrams are difficult to access non-visually; while some assistive interfaces have been designed for node-link diagrams, they rely upon a machine-readable representation of the diagram, whereas such diagrams will generally be made available as bitmap images. Our compact deep learning models show excellent quantitative and qualitative performance on a large synthetic dataset of node-link diagrams, reaching per-pixel accuracy over 93\%.

05.
arXiv (CS.CV) 2026-06-18

FlowObject: Flow Steering for Bridging Generative Priors and Reconstruction Fidelity

Recovering complete 3D representations of objects from few casual image captures remains a significant challenge. Recent 3D generative models, particularly those based on Flow-Matching (FM), can synthesize high-quality textured assets; however, they often suffer from ''synthetic bias'' where learned priors override observational evidence, alongside a lack of alignment with the observed instance. Conversely, optimization-based methods like 3D Gaussian Splatting (3DGS) provide high fidelity on visible surfaces but fail to reason about unobserved geometry. In this paper, we present FlowObject, a framework that reformulates sparse-view 3D reconstruction as a training-free, guided inverse problem. Our approach applies a dual-space guidance strategy to steer the Ordinary Differential Equation (ODE) trajectory of a flow-matching model, enabling the completion of unseen regions through learned generative priors while enforcing strict consistency with real-world observations. By integrating a 3DGS refinement stage, FlowObject further bridges the gap between ''synthetic-looking'' generative outputs and photorealistic reconstructions. Comprehensive benchmarks on synthetic and real-world datasets demonstrate that current state-of-the-art methods often struggle to achieve geometric completeness and observational consistency simultaneously, especially under severe occlusions. In contrast, our method significantly outperforms state-of-the-art generative models and optimization-based frameworks in both geometric completeness and view-dependent appearance fidelity.

06.
arXiv (quant-ph) 2026-06-17

Coupled-Mode Equations with Arbitrary Mode Combinations for Kinetic-Inductance Superconducting Traveling-Wave Parametric Devices: Theory and Experimental Validation

arXiv:2606.17264v1 Announce Type: cross Abstract: The coupled-mode equations (CMEs) have proven very successful in describing parametric processes in nonlinear optics. More recently, the same formulation has been used to model microwave superconducting parametric amplifiers and frequency multipliers. However, when applied to the microwave regime, not all assumptions remain valid and losses play a more dramatic role. Here, we revisit the CMEs applied to traveling-wave superconducting amplifiers to include losses and provide a formulation that enables their systematic derivation for any combination of traveling waves. As examples, we discuss the impact of unwanted harmonics and intermodulation products on parametric amplification, as well as harmonic generation. We verify that, if not properly accounted for, device performance can deviate considerably from the ideal case. Furthermore, using a superconducting CPW-based artificial transmission line and combining an independent experimental determination of its nonlinear parameter $I'_*$ with simulations of its linear properties, we obtain a parameter-free validation of this formulation. The nonlinear parameter was determined to be $I'_* \approx 27$ mA which, surprisingly, scales with the theoretical depairing current and not with the much smaller critical current of the device. For the validation, we measured multiple-harmonic generation and found excellent agreement between theory and experiment. The fact that $I'_* \gg I_C$ has direct implications for device design.

07.
arXiv (CS.CL) 2026-06-18

SciHorizon-GENE: Benchmarking LLM for Life Sciences Inference from Gene Knowledge to Functional Understanding

Large language models (LLMs) have shown growing promise in biomedical research, particularly for knowledge-driven interpretation tasks. However, their ability to reliably reason from gene-level knowledge to functional understanding, a core requirement for knowledge-enhanced cell atlas interpretation, remains largely underexplored. To address this gap, we introduce SciHorizon-GENE, a large-scale gene-centric benchmark constructed from authoritative biological databases. The benchmark integrates curated knowledge for over 190K human genes and comprises more than 540K questions covering diverse gene-to-function reasoning scenarios relevant to cell type annotation, functional interpretation, and mechanism-oriented analysis. Motivated by behavioral patterns observed in preliminary examinations, SciHorizon-GENE evaluates LLMs along four biologically critical perspectives: research attention sensitivity, hallucination tendency, answer completeness, and literature influence, explicitly targeting failure modes that limit the safe adoption of LLMs in biological interpretation pipelines. We systematically evaluate a wide range of state-of-the-art general-purpose and biomedical LLMs, revealing substantial heterogeneity in gene-level reasoning capabilities and persistent challenges in generating faithful, complete, and literature-grounded functional interpretations. Our benchmark establishes a systematic foundation for analyzing LLM behavior at the gene scale and offers insights for model selection and development, with direct relevance to knowledge-enhanced biological interpretation.

08.
arXiv (CS.CL) 2026-06-19

Clusters are All You Need: Pre-Training the Tsetlin Machine with Semantic Clusters from Language Models for Interpretability

Pre-trained language models such as BERT achieve strong text classification performance but lack transparency, limiting their use in high-stakes settings. The Tsetlin Machine (TM) offers fully interpretable, clause-based reasoning but captures little semantic information, and prior attempts to bridge the two rely on static word embeddings that miss contextual meaning. We propose a semantic pre-training framework that transfers knowledge from a pre-trained language model into a TM without using embeddings. Text samples are grouped into semantically coherent clusters with K-means or Top2Vec, and the resulting cluster-sample pairs pre-train a non-negated TM with enhanced Type I feedback. The TM thereby learns interpretable semantic keywords that are fine-tuned on downstream tasks. Across five datasets, our method substantially outperforms vanilla and embedding-based TMs and reaches performance competitive with BERT while remaining interpretable.

09.
arXiv (CS.AI) 2026-06-17

DPRM: A Plug-in Doob h transform-induced Token-Ordering Module for Diffusion Language Models

arXiv:2604.24357v2 Announce Type: replace-cross Abstract: Diffusion language models generate without a fixed left-to-right order, leaving token ordering as a central algorithmic choice. Existing systems mainly use random masking or confidence-driven ordering, which respectively suffer from train–test mismatch and myopic exploration. We introduce DPRM (Doob -transform Process Reward Model), a plug-in token-ordering module that keeps the host architecture, denoising objective and supervision unchanged, and modifies only the ordering policy. DPRM starts from confidence-driven ordering and gradually shifts to process-reward-guided ordering through online estimates. We characterize the exact DPRM policy as a reward-tilted Gibbs reveal law, prove convergence of its stagewise Soft-BoN approximation, show that the online bucketized controller tracks the exact DPRM score at empirical-Bernstein rates, and establish a sample-complexity advantage under tractable optimization assumptions. Across nine hosts covering language reasoning, test-time scaling, protein, single-cell, molecular, DNA, text-to-image generation, and VQA, DPRM order variants improve several language, DNA, and multimodal settings while also identifying boundary cases where confidence-only ordering or task-specific utilities are preferable. Code is available at: https://github.com/DakeBU/DPRM-DLLM

10.
arXiv (CS.AI) 2026-06-19

FFinRED: An Expert-Guided Benchmark Generation and Evaluation Framework for Financial LLM Red-Teaming

arXiv:2606.19887v1 Announce Type: cross Abstract: Existing safety benchmarks target general adversarial scenarios but miss finance-specific risks. Financial LLMs face regulatory compliance violations, fraud facilitation, and systemic trust erosion that require targeted evaluation. We introduce FinRED, an expert-guided red-teaming framework for financial LLM safety evaluation developed with financial experts. FinRED uses a novel two-level taxonomy mapping global standards (e.g., FATF and EU DORA) to threats ranging from regulatory evasion to complex fraud, integrated with a scalable pipeline that converts real financial documents into context-rich red-teaming Behavioral Prompts (seeds) through an expert-defined schema. Rigorous expert validation confirms seed plausibility and realism for meaningful LLM safety evaluation. We also provide an expert-validated, finance-specific rubric that goes beyond disclaimer checks, aligns more closely with human experts than static one-size-fits-all rubrics, and reduces critical false negatives from 28 to 12. Aligned with internationally adopted risk-management and information-security standards (e.g., ISO/IEC 27001), FinRED is deployed in South Korea's Financial Security Institute (FSI) regulatory sandbox for generative AI security evaluation in real financial services. To mitigate dual-use risks, the dataset, generation pipeline, prompt template, and evaluation framework are gated for qualified researchers at https://github.com/selectstar-ai/FinRED-paper and https://huggingface.co/datasets/datumo/FinRED.

11.
arXiv (CS.LG) 2026-06-19

Calibrating Generative Models to Feature Distributions with MMD Finetuning

arXiv:2606.19496v1 Announce Type: new Abstract: Generative models can produce individually plausible samples while deviating substantially from a target set in the distribution of key features. For example, a model pretrained on broad drug-like chemical space may generate molecules whose molecular features differ from those of a therapeutic class of interest, such as known antibiotics. Correcting such distributional miscalibration is challenging: direct finetuning on the target set can overfit and does not control which features are matched. To fill this gap, we introduce kernel Calibrating Generative Models (kCGM). kCGM minimizes a maximum mean discrepancy (MMD) between generated and target feature distributions using an unbiased score-function estimator, with KL regularization to remain close to the pretrained model. On a target set of 174 antibiotics, direct finetuning sacrifices chemical validity for feature-distribution matching, whereas kCGM improves target feature matching while increasing validity. We further demonstrate kCGM in protein and DNA generation tasks, showing it can adapt autoregressive, continuous-space diffusion, and discrete diffusion models using only feature-level supervision. Code is available at https://github.com/smithhenryd/cgm.

12.
arXiv (CS.CL) 2026-06-12

MoReBench: Evaluating Procedural and Pluralistic Moral Reasoning in Language Models, More than Outcomes

As AI systems progress, we rely more on them to make decisions with us and for us. To ensure that such decisions are aligned with human values, it is imperative for us to understand not only what decisions they make but also how they come to those decisions. Reasoning language models, which provide both final responses and (partially transparent) intermediate thinking traces, present a timely opportunity to study AI procedural reasoning. Unlike math and code problems which often have objectively correct answers, moral dilemmas are an excellent testbed for process-focused evaluation because they allow for multiple defensible conclusions. To do so, we present MoReBench: 1,000 moral scenarios, each paired with a set of rubric criteria that experts consider essential to include (or avoid) when reasoning about the scenarios. MoReBench contains over 23 thousand criteria including identifying moral considerations, weighing trade-offs, and giving actionable recommendations to cover cases on AI advising humans moral decisions as well as making moral decisions autonomously. Separately, we curate MoReBench-Theory: 150 examples to test whether AI can reason under five major frameworks in normative ethics. Our results show that scaling laws and existing benchmarks on math, code, and scientific reasoning tasks fail to predict models' abilities to perform moral reasoning. Models also show partiality towards specific moral frameworks (e.g., Benthamite Act Utilitarianism and Kantian Deontology), which might be side effects of popular training paradigms. Together, these benchmarks advance process-focused reasoning evaluation towards safer and more transparent AI.

13.
arXiv (quant-ph) 2026-06-12

Quantum-Driven Neuromorphic Computing for Million-Qubit-Scale Workloads

arXiv:2606.12968v1 Announce Type: new Abstract: We introduce Apollo, a 10000 node p-qubit neuromorphic processor fabricated in 16 nm mixed signal CMOS and operating fully at room temperature with a typical analog core power envelope of about 0.5 W. Its fundamental element, the p-qubit, is a bistable stochastic unit whose continuous time state fluctuations are driven by integrated quantum entropy units that inject true quantum derived randomness. This enables ultrafast stochastic transitions at low energy while preserving a classical state representation. Apollo combines these p-qubits with a high degree Hyperion 256 interconnect topology, allowing efficient embedding of dense Ising and QUBO problems with substantially reduced minor embedding overhead compared with sparse annealing platforms. We show that, through the Suzuki Trotter correspondence, the equilibrium statistics and annealing dynamics of the p-qubit network reproduce key properties of transverse field quantum annealing without cryogenic cooling, long lived coherence, or microwave control. Beyond device level validation, Apollo is evaluated on a three dimensional spin glass benchmark previously used to study quantum advantage in superconducting annealers. Across 300 disorder realizations, Apollo reaches substantially lower ground state energies than reported cryogenic quantum annealing hardware, while remaining distinct from classical simulated annealing and simulated quantum annealing. A 350 nm release candidate device experimentally validates the core p-qubit dynamics, thermodynamic sampling correctness, and continuous time annealing behavior. These results establish Apollo as a room temperature, industrially scalable platform for quantum driven energy based optimization, probabilistic inference, generative modeling, and hybrid classical quantum workflows.

14.
arXiv (CS.CL) 2026-06-11

Benchmarking Large Language Models for Safety Data Extraction

Accurate extraction of structured information from Safety Data Sheets (SDS) remains challenging in industrial safety due to heterogeneous document formats and the limitations of traditional rule-based methods. This study benchmarks state-of-the-art Large Language Models (LLMs) for automated SDS data extraction, comparing text-based and multimodal processing pipelines. We systematically evaluate four models: Gemini 1.5 Pro, GPT-4o, Claude 3.7 Sonnet, and Llama 3.1-70B, across three prompting strategies: zero-shot, few-shot, and chain-of-thought. The evaluation framework assessed accuracy, latency, and cost across more than 50,000 extracted data fields. Results show that text-based extraction consistently outperforms multimodal processing across all metrics. Gemini 1.5 Pro combined with a Chain-of-Thought prompt achieved the highest accuracy (84%), outperforming GPT-4o (81%) and Claude 3.7 Sonnet (79%). However, no model surpassed the 90% accuracy threshold commonly required for reliable real-world deployment. These findings indicate that general-purpose LLMs are not yet robust enough for unsupervised industrial use, though performance suggests strong potential with task-specific fine-tuning. Future research should focus on domain-adapted training, model calibration, and the integration of Human-in-the-Loop verification to ensure safety-critical reliability.

15.
arXiv (quant-ph) 2026-06-11

Partitioned Iterative Quantum Scheduling of Satellites for Urgent Disaster Response: Case study of Wildfire

arXiv:2606.12310v1 Announce Type: new Abstract: The standard in Earth-observation tasks today is having near real-time access to surface images in response to changing conditions. For instance, as urban environments interface more with wildlands and wildfires become less predictable, their tracking with satellite resources becomes essential. This requires the coordination of increasingly large constellations of satellites, giving rise to challenging computational problems. With wildfire detection and tracking as a backdrop, we investigate the power of special purpose and novel computing paradigms to tackle the ensuing satellite scheduling problems, making a compelling case for quantum algorithms. We bring quantum scheduling algorithms closer to implementation by examining both the emerging iterative quantum algorithm framework, which comes with analytic guarantees compared to some classical algorithms, and distributed quantum computing methods whose relevance is on the rise as utility-scale problems begin to get solved with quantum computers. Drawing strength from several computing fronts, we develop a distributed/parallelization scheme in conjunction with the quantum algorithm design and apply these techniques to real-world datasets for wildfire detection. While our quantum subprocesses are currently too small to see significant quantum advantage, our results validate the utility of these techniques, and continue forging the path toward distributed quantum computing.

16.
arXiv (CS.CV) 2026-06-15

Instruct-Particulate: Scaling Feed-Forward 3D Object Articulation with Kinematic Control

Reconstructing articulated 3D objects is important for animation, gaming, and robotic simulations. Recent neural networks can estimate the articulated structure of 3D objects, but their generalization remains limited by the scarcity of annotated data for this task. To address this gap, we introduce Instruct-Particulate, a model that takes a 3D mesh together with a target kinematic specification, including part descriptions, connectivity, joint types, and optional point prompts, and predicts the corresponding kinematic part segmentation and joint motion parameters. The kinematic specification disambiguates the task and allows the model to target annotations of different granularity, thereby making it possible to use more abundant heterogeneous training data. At test time, the kinematic specification can be obtained automatically from large-scale vision-language models, so the model can be applied to any input mesh. To train our model at scale, we construct a heterogeneous dataset of more than 150,000 articulated 3D objects, extending existing publicly available collections with data obtained by partially labelling other 3D models (monolithic or already decomposed into parts) with kinematic labels by means of vision-language models. Experiments show that our model generalizes better across categories and to AI-generated meshes, enabling articulated asset reconstruction from real-world images via image-to-3D models.

17.
arXiv (CS.CL) 2026-06-17

A Multifaceted Analysis of Social Biases in Large Language Models

Large language models (LLMs) have rapidly become indispensable tools for acquiring information and supporting human decision-making. However, ensuring that these models uphold fairness across varied contexts is critical to their safe and responsible deployment. In this study, we undertake a comprehensive examination of four widely adopted LLMs, probing their underlying biases and inclinations across the dimensions of politics, ideology, alliance, language, and gender. Through a series of carefully designed experiments, we investigate their political neutrality using news summarization, ideological biases through news stance classification, tendencies toward specific geopolitical alliances via United Nations voting patterns, language bias in the context of multilingual story completion, and gender-related affinities as revealed by responses to the World Values Survey. Results indicate that while the LLMs are aligned to be neutral and impartial, they still show biases and affinities of different types.

18.
arXiv (quant-ph) 2026-06-15

Electromagnetic Wightman functions and vacuum densities for a brane intersecting the AdS boundary

arXiv:2604.17583v2 Announce Type: replace-cross Abstract: We investigate the combined effects of a brane intersecting the AdS boundary and background gravitational field on the local characteristics of the electromagnetic vacuum. Two types of boundary conditions on the brane are considered, which are higher-dimensional generalizations of the perfect electric (PEC) and perfect magnetic (PMC) boundary conditions in Maxwell's electrodynamics. The brane-induced contributions to the Wightman functions of the vector potential and field tensor are explicitly extracted. Simple expressions in terms of elementary functions are provided. The behavior of the vacuum expectation values (VEVs) is mimicked by a scalar field with a negative effective mass squared determined by the radius of the AdS spacetime. The expectation values of the electric and magnetic fields squares and of the energy-momentum tensor are investigated as local characteristics of the vacuum state. The brane-induced contributions to these VEVs have opposite signs for the PEC and PMC conditions. For the PMC condition, this contribution is negative for the electric field squared and positive for the magnetic field squared. The VEV of the energy-momentum tensor has a nonzero off-diagonal component. The brane-induced vacuum energy density is positive for PMC condition, whereas the normal and parallel stresses change sign as functions of the distance from the brane. Unlike the problem involving a planar boundary in the Minkowski bulk, the vacuum energy-momentum tensor does not vanish in (3+1)-dimensional AdS spacetime.

19.
arXiv (math.PR) 2026-06-16

Experimentation for Different Scheduling Policies on Queues: Mixed Differences-in-Q Estimators Based on Little's Law

arXiv:2605.29641v2 Announce Type: replace-cross Abstract: In data centers, tasks are dispatched to various servers to evenly distribute the workload. When a data center considers implementing a new scheduling algorithm, it typically conducts an A/B test prior to deployment to assess the real-world impact of this new method. However, a straightforward A/B test might be interfered with so-called ``Markovian'' interference. We utilized the Differences-in-Q estimator, as developed by Farias et al. (2022), and introduced mixed Differences-in-Q estimators grounded in Little's Law. We show that our A/B testing methods significantly reduce bias and variance when testing various scheduling policies. Extensive simulations were conducted under scenarios like non-stationary arrival rates, heterogeneous service rates, and communication delays. These simulations highlight the robustness and efficacy of our A/B testing approach.

20.
arXiv (CS.AI) 2026-06-16

MedAI: Evaluating TxAgent's Therapeutic Agentic Reasoning in the NeurIPS CURE-Bench Competition

arXiv:2512.11682v2 Announce Type: replace Abstract: Therapeutic decision-making in clinical medicine constitutes a high-stakes domain in which AI guidance interacts with complex interactions among patient characteristics, disease processes, and pharmacological agents. Tasks such as drug recommendation, treatment planning, and adverse-effect prediction demand robust, multi-step reasoning grounded in reliable biomedical knowledge. Agentic AI methods, exemplified by TxAgent, address these challenges through iterative retrieval-augmented generation (RAG). TxAgent employs a fine-tuned Llama-3.1-8B model that dynamically generates and executes function calls to a unified biomedical tool suite (ToolUniverse), integrating FDA Drug API, OpenTargets, and Monarch resources to ensure access to current therapeutic information. In contrast to general-purpose RAG systems, medical applications impose stringent safety constraints, rendering the accuracy of both the reasoning trace and the sequence of tool invocations critical. These considerations motivate evaluation protocols treating token-level reasoning and tool-usage behaviors as explicit supervision signals. This work presents insights derived from our participation in the CURE-Bench NeurIPS 2025 Challenge, which benchmarks therapeutic-reasoning systems using metrics that assess correctness, tool utilization, and reasoning quality. We analyze how retrieval quality for function (tool) calls influences overall model performance and demonstrate performance gains achieved through improved tool-retrieval strategies. Our work was awarded the Excellence Award in Open Science. Complete information can be found at https://curebench.ai/.

21.
arXiv (CS.CV) 2026-06-11

Spatially Selective Self-Training for Unsupervised Building Change Detection

Unsupervised building change detection aims to learn building-change masks from unlabeled bi-temporal remote sensing images. Existing label-free methods often follow a discrepancy-to-mask paradigm, directly using temporal differences, frozen foundation-model responses, prompt-based outputs, or post-processing results as final change maps. Although these strategies provide annotation-free cues, they do not learn a task-specific building-change detector and remain vulnerable to the gap between generic temporal discrepancies and building-defined structural changes. In practice, such discrepancies are often noisy and task-irrelevant, as appearance shifts, registration errors, and non-building modifications can produce strong but misleading responses. To address this problem, we propose SST-CD, a spatially selective self-training framework that reformulates fully label-free building change detection as end-to-end detector learning under noisy pseudo supervision. SST-CD uses temporal discrepancies as candidate pseudo labels and trains the detector only on spatially reliable pixels, whose reliability is estimated by a local consistency criterion that filters inconsistent regions from supervision. To further stabilize noisy self-training, a lightweight feature adapter recalibrates bi-temporal features, while a prototype-based decoder produces compact change and no-change representations. Experiments on LEVIR-CD, WHU-CD, and DSIFN-CD show that SST-CD achieves F1 scores of 83.08%, 91.69%, and 86.60%, respectively, outperforming existing unsupervised and label-free baselines.

22.
arXiv (math.PR) 2026-06-18

Ergodic Properties of Non-Linear Density-Dependent Perturbations of the Ornstein-Uhlenbeck Process

arXiv:2606.18877v1 Announce Type: new Abstract: The present paper considers McKean-Vlasov SDEs with density-dependent spatially unbounded drift, which may be viewed as a non-linear density-dependent perturbation of the Ornstein-Uhlenbeck process. We develop a comprehensive theoretical framework for this class of equations. First, we establish strong well-posedness and derive optimal Gaussian pointwise bounds for both the solution density and its gradient. Then we derive an explicit expression for the stationary density and show that it satisfies logarithmic Sobolev and Poincaré inequalities. Finally, we prove exponential convergence to equilibrium in the \(\chi^2\)-metric.

23.
arXiv (CS.CL) 2026-06-19

Characterizing Narrative Content in Web-scale LLM Pretraining Data

The narrative composition of web-scale LLM pretraining corpora remains largely unexplored even though narrative is a fundamental mode of human communication. We present the first fine-grained study of narrative features in Dolma, a 3-trillion-token open pretraining corpus. Drawing on narrative theory, we design a framework spanning three core narrative elements (agency, setting, and events) operationalized as 11 interpretable dimensions. After sampling and annotating a diverse set of 400 passages, we finetune and validate NarraBERT, a RoBERTa-based model for fine-grained narrative prediction. We apply NarraBERT to 3M passages, resulting in a new dataset, NarraDolma. We find (i) narrative structure is measurable at scale across extremely heterogeneous data, (ii) we uncover a continuous, multidimensional narrative structure underlying web text, and (iii) narrative qualities are unequally distributed across pretraining sources and topics in ways that current curation practices neither measure nor account for. Our framework, dataset, and analyses provide a foundation for understanding how narrative qualities are distributed in LLM pretraining data and for studying how data composition affects narrative reasoning tasks. We publicly release NarraDolma and NarraBERT.

24.
arXiv (CS.CV) 2026-06-15

Trimodal Glioma Representation Alignment via Volumetric Contrastive Learning

Glioma grading and survival prediction require the integration of heterogeneous information collected at different spatial and biological scales. Histopathology describes tissue morphology, mRNA expression captures molecular activity, and magnetic resonance imaging provides a non-invasive view of tumor extent and radiological heterogeneity. Existing glioma prognosis models often combine only two of these sources, while their alignment objectives remain mostly pairwise. This paper introduces GLORIA, a novel trimodal framework for GLioma Omics - Radiology - hIstopathology Alignment. GLORIA processes whole-slide image regions, gene-expression profiles, and 3D MRI volumes through modality-specific encoders, projects them into a shared latent space, and aligns them with a Gramian contrastive loss that measures the volume spanned by the three modality embeddings. The aligned representations are fused through a cross-modal gating module and optimized jointly for three-class glioma grading and overall survival prediction. We evaluate GLORIA on a matched TCGA-GBM/LGG and BraTS21 cohort, comprising 132 patients with all three modalities. On the shared trimodal test set, GLORIA improves over the bimodal WSI-mRNA baseline in all the metrics considered.

25.
arXiv (CS.CV) 2026-06-19

Collaborative Multi-Modal Coding for High-Quality 3D Generation

3D content inherently encompasses multi-modal characteristics and can be projected into different modalities (e.g., RGB images, RGBD, and point clouds). Each modality exhibits distinct advantages in 3D asset modeling: RGB images contain vivid 3D textures, whereas point clouds define fine-grained 3D geometries. However, most existing 3D-native generative architectures either operate predominantly within single-modality paradigms-thus overlooking the complementary benefits of multi-modality data-or restrict themselves to 3D structures, thereby limiting the scope of available training datasets. To holistically harness multi-modalities for 3D modeling, we present TriMM, the first feed-forward 3D-native generative model that learns from basic multi-modalities (e.g., RGB, RGBD, and point cloud). Specifically, 1) TriMM first introduces collaborative multi-modal coding, which integrates modality-specific features while preserving their unique representational strengths. 2) Furthermore, auxiliary 2D and 3D supervision are introduced to raise the robustness and performance of multi-modal coding. 3) Based on the embedded multi-modal code, TriMM employs a triplane latent diffusion model to generate 3D assets of superior quality, enhancing both the texture and the geometric detail. Extensive experiments on multiple well-known datasets demonstrate that TriMM, by effectively leveraging multi-modality, achieves competitive performance with models trained on large-scale datasets, despite utilizing a small amount of training data. Furthermore, we conduct additional experiments on recent RGB-D datasets, verifying the feasibility of incorporating other multi-modal datasets into 3D generation.