Academic Intelligence · Curated Daily

探索全球前沿学术脉络

AcademicHub 汇聚顶级期刊与预印本平台的实时文献。定制您的专属科研雷达,利用大语言模型自动生成交叉领域文献分析简报。

01.
arXiv (CS.AI) 2026-06-15

Learning High Coverage Discriminative Parsimonious Rulesets

arXiv:2606.14156v1 Announce Type: cross Abstract: Learning systems based on IF-THEN rule representations readily offer interpretability, making them a crucial focus in contemporary AI research. A key objective for such rule sets is to achieve both high discriminative power and interpretability. While existing state-of-the-art algorithms implicitly prioritize predictive accuracy, they often fall short on one or more quality metrics that ensure interpretability, such as coverage and parsimony of rule sets. Motivated by this, this paper propose the development of CDPR, which aims to create highly accurate and interpretable rule sets for classification problems. To the best of our knowledge, this represents the first attempt to establish such an approach. In this study, we introduce two algorithms rooted in submodular maximization, which not only provide provable guarantees on coverage but also yield rule sets that are both discriminative and parsimonious. We empirically demonstrate that rule sets learned through our approaches achieve higher accuracy and interpretability and has more than a 2.5-fold improvement in average coverage rates when compared to the next best algorithm.

02.
arXiv (CS.LG) 2026-06-11

Renewable Lasso without Batch-Number Constraints: A Gradient-Enhanced Approach

arXiv:2606.11738v1 Announce Type: cross Abstract: We study online estimation for high-dimensional generalized linear models with streaming data. First, for the non-distributed setting, we propose a gradient-enhanced surrogate loss that approximates the cumulative loss using only historical summaries, which modifies and improves upon the existing renewable estimation approach for the same model in the high-dimensional setting, and removes the batch-number constraint in previous studies. We then extend the method to distributed streaming data under the master-client architecture, where batches are partitioned across sites and only summaries (gradient vectors) are exchanged. Instead of directing applying the popular method of Jordan et al. (2019) to the surrogate quadratic loss, our adjusted approach does not require the clients to compute the full surrogate loss. We derive non-asymptotic error bounds under the high-dimensional scaling, without the stringent constraint on the number of batches in the previous studies. Simulation results under linear and logistic models, together with a real-data application, show improved accuracy over existing renewable estimators.

03.
arXiv (CS.CV) 2026-06-12

Fully Distributed Multi-View 3D Tracking in Real-Time

Multi-camera tracking with overlapping fields of view typically relies on centralized fusion, which creates computational bottlenecks that prevent deployment at scale. We present MV3DT, a fully distributed framework for real-time multi-view 3D tracking that achieves accurate identity propagation and occlusion recovery through peer-to-peer coordination, eliminating the need for central aggregation. Each camera node executes a lightweight modular pipeline comprising monocular 3D perception, distributed multi-view association, and collaborative fusion via lightweight messaging. MV3DT achieves 94.3% IDF1 and 93.3% MOTA on WILDTRACK, competitive with state-of-the-art centralized methods, while demonstrating superior scalability by sustaining 30 FPS on 100 cameras with less than 10 ms inter-camera latency and only 2.2% communication overhead. MV3DT operates in a zero-shot regime given camera calibrations, requiring no scene-specific learning and making it directly deployable in new environments. These results establish MV3DT as a practical solution for real-time multi-view tracking in large-scale overlapping camera networks.

04.
arXiv (CS.CV) 2026-06-11

Learning Instance-Adaptive Low-Rank Orthogonal Subspaces for Clothes-Changing Person Re-Identification

Clothes-changing person re-identification (CC-ReID) aims to recognize individuals despite drastic appearance changes caused by clothing variation. While existing methods rely on adversarial learning to disentangle clothing features, we propose Ortho-ReID, which explicitly models a low-rank clothing subspace from VLM text descriptions and extracts clothing-invariant representations via direct geometric constraints. A critical component is our transformer-based Basis Maker, which refines a shared, low-dimensional clothing prior into an instance-adaptive low-rank subspace through cross-attention with image patches, enabling robust clothing feature extraction even under varying visibility conditions. This instance-adaptive subspace is supervised via alignment with clothing text embeddings, while identity features are extracted via a learnable projection head and geometrically constrained to be strictly orthogonal to it. Extensive experiments demonstrate state-of-the-art performance on PRCC (+5.9% top-1), Celeb-reID-light (+3.5%), and LaST (+5.3%), with competitive results on LTCC.

05.
arXiv (CS.AI) 2026-06-19

MakeupMirror: Improving Facial Attribute Preservation in Diffusion Models for Makeup Transfer

arXiv:2606.20094v1 Announce Type: cross Abstract: Makeup transfer models enable fun augmented reality (AR) experiences as well as virtual try-on (VTO) for online makeup shopping. While recent state-of-the-art diffusion based solutions such as Stable-Makeup dramatically improve the accuracy and realism of makeup transfer, they still face limitations in identity and skin color preservation, making production-level VTO for makeup shopping unrealistic. In this work, we propose MakeupMirror, a diffusion-based approach to makeup transfer that makes significant progress towards preserving facial features and skin tone. We introduce several technical innovations over Stable-Makeup: (1) integration of facial geometry conditioning with ControlNets to maintain facial fidelity; (2) region-specific makeup transfer control to enable precise makeup application across facial regions such as skin, eyes and lips; (3) skin tone-based makeup transfer modulation that prevent skin tone alteration in cross-subject transfer scenarios; and (4) integration of a Levenberg-Marquardt Langevin sampler to speed up inference while maintaining generation quality. Our experiments on CPM-Real, Makeup Wild, and (herein newly collected, more diverse) MakeupSelfies datasets show that MakeupMirror improves relative facial recognition similarity by +60%, reduces relative skin tone difference by -50% over Stable-Makeup, with a latency of 0.7s, while achieving expert acceptance rate of 94% across core facial identity preservation criteria.

06.
arXiv (CS.CV) 2026-06-19

One-Shot Novel View and Pose Human Image Synthesis via 3D Prior Guided Diffusion Model

This paper addresses the challenge of one-shot novel view and pose human image synthesis. The existing methods transfer the reference human image to a target pose using a set of 2D pose keypoints or synthesize human images based on generalizable human NeRF which uses human model priors to extract point-wise features. However, pose transfer based methods can not handle complex human pose using ambiguous 2D pose as the condition, while generalizable human NeRFs may be inaccurate to recover occluded/invisiable human parts without extracted reliable features. To solve these problems, we propose a novel approach for novel view and pose synthesis from a singe human image via conditional denoising diffusion model. Our diffusion model divides the novel view and pose synthesis problem into a sequence of conditional denoising steps. Specifically, to generate humans with complex and arbitrary poses, we introduce 3D human priors, i.e., 3D normal map and color prompt, as geometry and color conditions into the generation process. By transferring the reference human into the target human with a series of diffusion steps, our diffusion model enables high-quality synthesis including the occluded/invisible parts. Further, we propose a self-reconstruction based customized refinement to enhance fine details when tested on novel persons.Experimental results on different public datasets demonstrate that our approach significantly outperforms previous methods and also shows better generalization ability across datasets. The code will be made publicly available at https://github.com/Yankeegsj/3DPGDM.

07.
arXiv (CS.AI) 2026-06-12

Neuro-Symbolic Agents for Regulated Process Automation: Challenges and Research Agenda

arXiv:2606.13405v1 Announce Type: new Abstract: LLM-based agents are entering regulated industries where they automate judgment intensive quality management processes. We argue that symbolic structures already embedded in these domains, including regulations, typed process models, and compliance constraints, should be treated not merely as external monitoring mechanisms but as core architectural components that shape the agent's decision-making and behavior. We propose compliance-by-construction as a complementary paradigm to guardrail-based monitoring: a structural foundation that prevents control-flow violations, while guardrails remain essential for catching semantic errors. We identify a structured set of neuro-symbolic research challenges on foundational and capability level and show that addressing them jointly enables compliance-by-construction. We call on the neuro-symbolic community to engage with regulated process automation as a high impact research domain.

08.
arXiv (CS.AI) 2026-06-12

A Study of Belief Revision Postulates in Multi-Agent Systems (Extended Version)

arXiv:2605.02249v2 Announce Type: replace Abstract: We investigate the belief revision problem in epistemic planning, i.e., what will be the beliefs of all agents in a multi-agent system after an agent gains the belief in some state property. Based on the standard representation in epistemic planning of agents' beliefs via a single multi-agent Kripke model, we generalize the classical AGM belief revision postulates to the multi-agent setting, with the aim to provide a formal framework for evaluating dynamic epistemic reasoning frameworks in which the beliefs of all agents as the result of actions are computed. As an example of a simple operator that satisfies all of the generalized AGM postulates, we present generalized full-meet multi-agent belief revision. We moreover define a generalization of the standard postulates for iterated revision, present a more sophisticated, event model based revision operator, and discuss the potential issues in defining an epistemic operator on Kripke models that can satisfy all of the generalized postulates for iterated multi-agent belief revision.

09.
arXiv (CS.CV) 2026-06-17

Qwen-RobotManip Technical Report: Alignment Unlocks Scale for Robotic Manipulation Foundation Models

Foundation models in language and multimodality achieve strong generalization by aligning heterogeneous data under a unified formulation and training at scale. In this report, we investigate whether this scaling recipe can be applied to robotic manipulation to achieve genuine generalization. This is challenging because, unlike text, manipulation data is heterogeneous by nature, expensive to collect, and narrow in diversity, making alignment and scale simultaneously difficult. We present Qwen-RobotManip, a generalizable Vision-Language-Action foundation model built on Qwen-VL. Qwen-RobotManip introduces a unified alignment framework across the representation, motion, and behavioral dimensions of manipulation, making large-scale multi-source training coherent rather than conflicting. This alignment capability in turn enables Qwen-RobotManip to absorb manipulation data at a scale that prior training regimes could not sustain. A human-to-robot synthesis pipeline converts egocentric hand demonstrations into robot trajectories across 15 platforms, and a rigorous curation pipeline harmonizes heterogeneous datasets. Using only open-source datasets and human videos without proprietary data collection, Qwen-RobotManip constructs a ~38,100-hour pretraining corpus and exhibits emergent generalization capabilities, including zero-shot instruction following, robustness to perturbations, reactive error recovery, and cross-embodiment transfer. We find that standard benchmarks fail to capture pretraining quality and instead adopt OOD settings including RoboCasa365, LIBERO-Plus, EBench, RoboTwin-Clean2Rand, RoboTwin-IF, and RoboTwin-XE. Qwen-RobotManip substantially outperforms prior state-of-the-art models, including $\pi$0.5, across all OOD settings, ranks 1st in RoboChallenge with a 20% relative improvement, and is validated on real-robot platforms including AgileX ALOHA, Franka, UR, and ARX.

10.
arXiv (CS.AI) 2026-06-18

RTSGameBench: An RTS Benchmark for Strategic Reasoning by Vision-Language Models

arXiv:2606.18950v1 Announce Type: new Abstract: Modern Vision-Language Models (VLMs) often struggle with strategic reasoning, i.e., anticipating and influencing other agents' actions, under uncertainty in competitive and cooperative settings. Real-time strategy (RTS) games can be a natural testbed for diagnosing this limitation, as they demand coordination with allies, adaptation to opponents' strategy, and long-horizon planning under partial observability. However, existing RTS benchmarks offer limited evaluation scope, lack systematic competency diagnosis, and remain fixed in the pre-designed scenario coverage. To address these limitations, we present RTSGameBench, which is built on Beyond All Reason, a large-scale RTS game with an expanded battlefield that demands broader strategy diversity than the existing testbeds. The proposed benchmark provides evaluations through diverse gameplay across various matchup structures, diagnostic assessment via mini-games, each targeting an individual strategic competency, and extensible coverage via a self-evolving generation framework that converts free-form queries into new mini-games, improving over successive cycles. Additionally, for VLMs to operate in large-scale RTS games, we provide RTSGameAgent that manages units by an FSM with agentic memory. We empirically validate that multiple state-of-the-art VLMs do not perform well when matchups demand tighter coordination, multiagent coordination and when task scale increases.

11.
bioRxiv (Bioinfo) 2026-06-18

Identification of environmental factors and growth stages in the prediction of fibre yield and fibre quality traits in rain-grown cotton

Context Understanding how and when environmental conditions influence overall crop performance is crucial for optimising the development of genotypes to a specific breeding target environment. We focused on economically important traits of Australian rain-grown cotton including fibre yield and quality traits, which have not been investigated comprehensively. The aim of the study was to identify relevant environmental factors, and the timing and extent of their impact on rain-grown cotton production. Methods We used a data driven approach to analyse the relationship between ten climate related environmental factors across various plant growth stages and eight fibre yield and quality traits, using a large-scale field dataset of 9,283 records collected over 23 years at 4 locations, with 53 unique year-location combinations. We applied eight complementary statistical models including stepwise, penalised and Bayesian linear regression, regression-tree based ensemble methods and deep learning frameworks to (1) select the most essential environmental covariates affecting rain-grown cotton production, and (2) evaluate the predictive performance of these models. Results The environmental impacts on rain-grown cotton production were trait and growth-stage specific. Number of rainy days and solar radiation were identified as the most influential environmental factors for fibre yield traits, vapour pressure deficit at maximum daily temperature was the most influential factor for majority of fibre quality traits. However, each analysed trait was influenced by multiple environmental factors across multiple growth stages (rather than a single factor or a single growth stage). These influential covariates explained a wide range of variation in the traits, accounting for 5.8% to 68.2%. Using the best-fit random forest model, our findings revealed non-linear relationships between key environmental covariates and the traits. Conclusions Environmental factors at different rain-grown cotton growth stages are key determinants for the performance of end-of-season fibre yield and fibre quality parameters. These findings highlight the need to account for environment conditions when developing cotton varieties optimised for rain-grown production systems. Potential strategies are proposed whereby these key environmental factors can be used to increase the rate of genetic gain in rain-grown cotton production systems. Implications The results of this study will be crucial for future genetic evaluations and analyses of genotype-by-environment interaction effects in rain-grown cotton, which must account for the influence of the environment on plant performance. Furthermore, these methods can be applied to other species to identify critical growth stages and environmental factors which most influence crop performance.

12.
arXiv (CS.AI) 2026-06-16

Automating Low-Risk Code Review at Meta: RADAR, Risk Calibration, and Review Efficiency

arXiv:2605.30208v2 Announce Type: replace-cross Abstract: AI-assisted coding tools have altered software production. At Meta, significant lines of code per human-landed diff grew by 105.9% year over year and per-developer diff volume rose 51%, with agentic AI responsible for over 80% of that growth. Meanwhile, the share of diffs receiving timely review has declined, exposing a widening gap between code supply and reviewer bandwidth. We ask three questions that progress from feasibility through calibration to impact: (1) can risk-stratified automation operate at scale across diverse organizations, (2) how does tuning the risk threshold affect the trade-off between automation yield and safety, and (3) to what extent does automated review reduce end-to-end latency for AI-generated changes? We deployed RADAR (Risk Aware Diff Auto Review), a multi-stage funnel that classifies each diff by authorship and source type, applies eligibility gates, static heuristics, a machine-learned Diff Risk Score, LLM-based Automated Code Review, and deterministic validation before landing qualifying changes. We evaluate RADAR through telemetry covering 535K+ RADAR-reviewed diffs, observational before-after comparisons for policy changes, and difference-in-differences analysis of efficiency outcomes. RADAR has reviewed 535K+ diffs and landed 331K+. Relaxing the Diff Risk Score threshold from the 25th to the 50th percentile increased the approve rate to 60.31%. The revert rate for RADAR-reviewed diffs is 1/3 that of non-RADAR diffs, and the Production Incident rate is 1/50 that of non-RADAR diffs. RADAR reduces median time to close by over 330% and median diff review wall time by 35%. Risk-aware layered automation can materially reduce review bottlenecks created by AI-driven code growth without compromising production safety.

13.
arXiv (CS.CV) 2026-06-18

SPARX: Secure and Privacy-Aware Approximate CNN Acceleration with Edge RISC-V SoC

Edge-AI systems increasingly require real-time CNN inference under strict energy, performance, security, and privacy constraints. Approximate computing improves hardware efficiency by exploiting the error resilience of neural network workloads; however, most approximate CNN accelerators do not jointly consider secure, privacy-aware edge deployment. This paper presents SPARX, a Secure and Privacy-Aware Approximate CNN Acceleration framework integrated within a heterogeneous RV32IMC RISC-V System-on-Chip (SoC). SPARX combines a custom RISC-V instruction extension, an approximate logarithmic CNN acceleration unit, a lightweight differential-noise-based privacy engine, and a challenge-response authentication mechanism. To guide arithmetic selection, an approximation-aware decision framework is introduced that uses the Approximation Severity Index (ASI), Approximation Efficiency (AE), Quality of Approximation (QoA), Approximation Figure-of-Merit (AFOM), and Hardware Acceleration Efficiency (HAE). Evaluation across 11 state-of-the-art approximate MAC architectures identifies the Iterative Logarithmic Multiplier (ILM) as the most suitable design, achieving 51.7% area reduction, 81.5% power reduction, and 2.13x throughput improvement compared with an accurate radix-4 Booth MAC, while only reducing ResNet-20/CIFAR-10 accuracy by 2.82 percentage points. FPGA implementation on a Xilinx VC707 platform achieves 58.4 GOPS/W energy efficiency at 250 MHz, while 28-nm CMOS physical implementation validates ASIC feasibility

14.
arXiv (math.PR) 2026-06-11

Construction of ergodic IDLA forests in $\mathbb{Z}^d$

arXiv:2506.10476v2 Announce Type: replace Abstract: We prove the existence of infinite-volume IDLA forests in $\mathbb{Z}^d$ , with $d \geq 2$, based on a multi-source IDLA protocol. Unlike IDLA aggregates, the laws of the IDLA forests studied here depend on the trajectories of particles, and then do not satisfy the famous Abelian property. Their existence is due to a stabilization result (Theorem 1.1, our main result) that we establish using percolation tools. Although the sources are infinitely many, we also prove that each of them play the same role in the building procedure, which results in an ergodicity property for the IDLA forests (Theorem 1.2).

15.
arXiv (CS.CV) 2026-06-16

Implementation of Licensed Plate Detection and Noise Removal in Image Processing

作者:

Car license plate recognition system is an image processing technology used to identify vehicles by capturing their Car License Plates. The car license plate recognition technology is also known as automatic number-plate recognition, automatic vehicle identification, car license plate recognition or optical character recognition for cars. In Malaysia, as the number of vehicle is increasing rapidly nowadays, a pretty great number of vehicle on the road has brought about the considerable demands of car license plate recognition system. Car license plate recognition system can be implemented in electronic parking payment system, highway toll-fee system, traffic surveillance system and as police enforcement tools. Additionally, car license plate recognition system technology also has potential to be combined with various techniques in other different fields like biology, aerospace and so on to achieve the goal of solving some specialized problems.

16.
arXiv (CS.CV) 2026-06-11

Plan-and-Verify Video Reward Reasoning with Spatio-Temporal Scene Graph Grounding

Reward models for text-to-video (T2V) generation guide post-training but often fail at fine-grained semantic alignment. We trace this to two structural weaknesses in existing reasoning-based reward models: they do not systematically verify every condition described in the prompt, and the visual evidence supporting each judgment remains implicit in their free-form reasoning. We propose SG-PVR, a video reward model that addresses these limitations through plan-and-verify reasoning grounded in spatio-temporal scene graphs. The verification plan decomposes the prompt into atomic claims, ensuring every requirement is checked. The spatio-temporal scene graph, encoding entities, attributes, and temporally-grounded relations, is extracted from the video and maintained as a persistent structured visual reference throughout reasoning. Each claim is verified against both the video and the scene graph, anchoring judgments in explicit visual evidence. SG-PVR achieves strong performance on semantic alignment, including fine-grained temporal semantics. As a test-time reranker, it further enhances compositional alignment in T2V generation.

17.
arXiv (CS.AI) 2026-06-11

Sample-Efficient Hypergradient Estimation for Decentralized Bi-Level Reinforcement Learning

arXiv:2603.14867v4 Announce Type: replace-cross Abstract: Many strategic decision-making problems, such as environment design for warehouse robots, can be naturally formulated as bi-level reinforcement learning (RL), where a leader agent optimizes its objective while a follower solves a Markov decision process (MDP) conditioned on the leader's decisions. In many situations, a fundamental challenge arises when the leader cannot intervene in the follower's optimization process; it can only observe the optimization outcome. We address this decentralized setting by deriving the hypergradient of the leader's objective, i.e., the gradient of the leader's strategy that accounts for changes in the follower's optimal policy. Unlike prior hypergradient-based methods that require extensive data for repeated state visits or rely on gradient estimators whose complexity can increase substantially with the high-dimensional leader's decision space, we leverage the Boltzmann covariance trick to derive an alternative hypergradient formulation. This enables efficient hypergradient estimation solely from interaction samples, even when the leader's decision space is high-dimensional. Additionally, to our knowledge, this is the first method that enables hypergradient-based optimization for 2-player Markov games in decentralized settings. Experiments highlight the impact of hypergradient updates and demonstrate our method's effectiveness in both discrete and continuous state tasks.

18.
arXiv (CS.CV) 2026-06-15

One Layer's Trash is Another Layer's Treasure: Adaptive Layer-wise Visual Token Selection in LVLMs

Large Vision-Language Models (LVLMs) have achieved remarkable success across diverse multimodal tasks, yet their practical deployment remains constrained by the computational burden arising from lengthy visual tokens. While visual token pruning has emerged as a promising solution, existing methods suffer from a fundamental limitation: once tokens are pruned at a specific layer, they become inaccessible to all subsequent layers, leading to premature information loss that can compromise model performance. Through empirical studies, we observe that different layers exhibit distinct visual region focus, indicating a varying optimal token subset across layers. Motivated by this insight, we propose Adaptive Layer-wise Visual Token Selection (ALVTS), a novel framework that breaks away from the conventional static token pruning paradigm. ALVTS incorporates a lightweight token selector to identify and route important tokens for further processing, while allowing less important tokens to skip the layer, thus minimizing computational redundancy. These two streams of tokens are seamlessly reintegrated before being fed into subsequent layers, facilitating adaptive compression across the entire model. Grounded in our importance consistency constrained low-rank approximation, the proposed token selection module closely emulates the full attention mechanism, effectively capturing its essential patterns without requiring model retraining. Extensive experiments on LLaVA-1.5, LLaVA-NeXT, and Qwen2.5-VL validate the effectiveness of our method. With an 89% token compression ratio, ALVTS retains 96.7% of the original model's accuracy, achieving a superior efficiency-accuracy trade-off for LVLM inference.

19.
arXiv (CS.CV) 2026-06-12

Self-Evolving Vision-Language Models for Image Quality Assessment via Voting and Ranking

Improving vision-language models (VLMs) in the post-training stage typically relies on supervised fine-tuning or reinforcement learning, methods that necessitate costly, human-annotated data. While self-supervised techniques have proven effective for enhancing reasoning capabilities, their application to perceptual domains such as image quality assessment (IQA) remains largely unexplored. In this work, we introduce EvoQuality, a novel framework that enables a VLM to autonomously refine its quality perception capabilities without any ground-truth labels. EvoQuality adapts the principle of self-consistency to the ranking-based nature of IQA. It generates pseudo-labels by performing pairwise majority voting on the VLM's own outputs to establish a consensus on relative quality. These pseudo-rankings are then formulated into a fidelity reward that guides the model's iterative evolution through group relative policy optimization (GRPO). By iteratively leveraging its own predictions, EvoQuality progressively refines the VLM's perceptual capability. Extensive experiments show that EvoQuality boosts the base VLM's zero-shot performance by 31.8% on PLCC across diverse IQA benchmarks. Remarkably, despite being entirely self-supervised, EvoQuality achieves performance that is competitive with, or even surpasses, state-of-the-art supervised VLM-based IQA models, outperforming these models on 5 out of 7 IQA benchmarks. Furthermore, the framework demonstrates significant flexibility, allowing it to be stacked with pre-trained IQA models to bolster generalization on unseen datasets. Codes and checkpoints will be available at https://github.com/bytedance/EvoQuality.

20.
arXiv (CS.CL) 2026-06-18

DreamReasoner-8B: Block-Size Curriculum Learning for Diffusion Reasoning Models

Block diffusion language models accelerate decoding through parallel block-wise denoising, yet whether they can be reliably scaled for long chain-of-thought (CoT) reasoning remains unresolved. To this end, we develop DreamReasoner-8B, an open-source block diffusion reasoning model, and conduct a systematic study of how training and inference block sizes affect long-CoT reasoning. Our analysis reveals a stark performance disparity: training with large block sizes yields remarkably poor reasoning, whereas small block sizes preserve effective reasoning. To bridge this granularity gap, we propose block-size curriculum learning, which gradually transitions training from fine-grained to coarse-grained block sizes, thereby overcoming this limitation and enabling strong reasoning performance that generalizes across diverse inference block sizes. On mathematical and code reasoning benchmarks, DreamReasoner-8B achieves results competitive with leading open autoregressive models such as Qwen3-8B. This work establishes a practical foundation for efficient, reasoning-capable diffusion language models. We release our model at https://github.com/DreamLM/DreamReasoner.

21.
arXiv (CS.AI) 2026-06-12

PhononBench:A Large-Scale Phonon-Based Benchmark for Dynamical Stability in Crystal Generation

arXiv:2512.21227v3 Announce Type: replace-cross Abstract: In recent years, generative artificial intelligence has made significant advances in the design of crystalline materials, giving rise to approaches based on graph neural networks, diffusion models, and large language models. Existing evaluations commonly follow the stability-uniqueness-novelty (S.U.N.) framework, where stability is primarily assessed using thermodynamic criteria, which do not fully capture the dynamical stability essential for a material's practical existence. Dynamical stability is a key determinant of whether a material can be synthesized and persist, with phonon spectrum calculations serving as the standard for its evaluation. However, the high computational cost of such calculations has prevented large-scale assessment of dynamical stability in generated crystals. In this work, we introduce PhononBench, the first large-scale benchmark for dynamical stability in AI-generated crystals. Leveraging the recently developed MatterSim interatomic potential, which achieves density-functional-theory (DFT)-level accuracy in phonon predictions across more than 10,000 materials, PhononBench enables efficient phonon calculations and dynamical-stability analysis for 133,838 crystal structures generated by 7 leading crystal generation models. PhononBench reveals a widespread limitation of current generative models: unless otherwise specified, all reported dynamical-stability metrics are evaluated at a phonon-frequency threshold of -0.1 THz, with the average dynamical-stability rate across all generated structures being only 32.15%, and the top-performing model, MatterGen, reaching just 45.05%.In addition, we identify 32,995 crystal structures that are phonon-stable across the entire Brillouin zone under a strict threshold of -0.001 THz. In addition, a web-based service is accessible at http://phononbench.cn/, enabling minute-level ultra-fast phonon predictions.

22.
arXiv (CS.LG) 2026-06-16

Learning Policy from a Single Trajectory in Average-Reward Markov Decision Process

arXiv:2606.16729v1 Announce Type: new Abstract: While there is an extensive body of work characterizing the sample complexity of discounted cumulative-reward MDPs, finite sample analyses for average-reward MDPs have been limited, and most existing works rely on restrictive assumptions such as ergodicity or access to a generative model. In this work, we establish the first finite sample complexity guarantees from a single trajectory for weakly communicating average-reward MDPs. To this end, we study the dynamics of a single trajectory in weakly communicating MDPs and based on this analysis, we develop novel model-free methods. Notably, our value-based and policy-based methods provide finite sample complexity guarantees of $\widetilde{O}(1/\varepsilon^2)$ and $\widetilde{O}(1/\varepsilon^4)$ from a single trajectory in weakly communicating MDPs, respectively. Furthermore, we introduce the first model-free method that requires no prior knowledge of problem-dependent quantities for communicating MDPs.

23.
arXiv (CS.CV) 2026-06-12

DiskChunGS: Large-Scale 3D Gaussian SLAM Through Chunk-Based Memory Management

Recent advances in 3D Gaussian Splatting (3DGS) have demonstrated impressive results for novel view synthesis with real-time rendering capabilities. However, integrating 3DGS with SLAM systems faces a fundamental scalability limitation: methods are constrained by GPU memory capacity, restricting reconstruction to small-scale environments. We present DiskChunGS, a scalable 3DGS SLAM system that overcomes this bottleneck through an out-of-core approach that partitions scenes into spatial chunks and maintains only active regions in GPU memory while storing inactive areas on disk. Our architecture integrates seamlessly with existing SLAM frameworks for pose estimation and loop closure, enabling globally consistent reconstruction at scale. We validate DiskChunGS on indoor scenes (Replica, TUM-RGBD), urban driving scenarios (KITTI), and resource-constrained Nvidia Jetson platforms. Our method uniquely completes all 11 KITTI sequences without memory failures while achieving superior visual quality, demonstrating that algorithmic innovation can overcome the memory constraints that have limited previous 3DGS SLAM methods.

24.
arXiv (CS.AI) 2026-06-18

A Reproducible Log-Driven AutoML Framework for Interpretable Pipeline Optimization in Healthcare Risk Prediction

arXiv:2605.21528v2 Announce Type: replace-cross Abstract: Accurate disease risk prediction is challenged by heterogeneous features, limited data, and class imbalance. This study presents yvsoucom-iterkit, a deterministic AutoML framework that models pipeline optimization as a configuration-level system with full reproducibility and traceable execution logs, enabling systematic analysis of component attribution, interactions, similarity, and cross-seed robustness. Experiments on the Pima Indians Diabetes and Stroke datasets across more than 18,000 pipeline configurations reveal a structured yet partially redundant search space, where performance is dominated by a small subset of interacting components. Ensemble models achieve stable performance, reaching a Weighted-F1 of 0.89 on Pima and 0.94 on Stroke. Macro-F1 reaches approximately 0.88 on Pima but drops to 0.6560 on Stroke due to severe imbalance. Cross-seed experiments show that ensembles reduce variance compared to single models. Friedman testing ($p < 0.05$) confirms significant ranking differences across configurations. Based on analysis of component attribution, interaction, and similarity, optimal configuration design reveals dataset-dependent behavior. For the Pima dataset, computational efficiency benefits from simplified search spaces where redundant components can be removed, with split ratio playing a key role. In contrast, the Stroke dataset requires enhanced imbalance-aware strategies, where RandomOverSampler improves Macro-F1 from 0.6560 to 0.6766. These findings demonstrate that effective AutoML optimization is achieved through optimal configuration design, where carefully constraining the search space to high-impact components can improve performance, stability, and interpretability while reducing unnecessary search complexity.

25.
arXiv (CS.LG) 2026-06-18

Measurement noise limits the advantage of nonlinear models over linear models in biomedical prediction

arXiv:2606.18420v1 Announce Type: new Abstract: On biomedical tabular data, flexible models such as deep networks, gradient-boosted trees, and kernel methods are repeatedly matched or beaten by linear and logistic regression given the same features. The usual reaction is to treat this as a model-side shortfall, to be fixed with more data, a better architecture, or tuning, on the assumption that the nonlinear structure is there and the model has failed to capture it. We argue that these fixes cannot help when the binding limit is the measurement rather than the model, as it frequently is in biomedicine. Additive noise blurs the population-optimal predictor, and because blurring removes a function's fine, rapidly varying detail before its broad shape, it erases nonlinear structure faster than linear structure. A degree-$k$ interaction is attenuated by the $k$-th power of feature reliability, while the linear part is attenuated only once. At the reliabilities typical of biomedical measurement, the nonlinear advantage can vanish even when the underlying biology is strongly nonlinear, and what the noise removes cannot be recovered by a larger cohort or a more flexible model, only by better measurement. The nonlinearity is hidden, not absent, and a tie between linear and flexible models is not by itself a verdict on the biology. These pieces are classical, drawn from measurement-error statistics, psychometrics, and Gaussian analysis, and we assemble them into an exact excess-risk identity. Measurement reliability is one of three conditions, alongside sample size and feature representation, that must align for a flexible model to help, and together they leave only a narrow window that most biomedical tasks fall outside. Across 140 UK Biobank tasks, the gap between flexible and linear models, where it exists, carries the predicted noise signature, and the three conditions can be separated by intervention but not by a benchmark alone.