Academic Intelligence · Curated Daily

探索全球前沿学术脉络

AcademicHub 汇聚顶级期刊与预印本平台的实时文献。定制您的专属科研雷达,利用大语言模型自动生成交叉领域文献分析简报。

01.
arXiv (quant-ph) 2026-06-12

Measuring Control-Plane Openness in Near-Term Quantum Computing: A Rubric, Its Validation, and an Application to Thirteen Vendor Stacks

arXiv:2605.15233v2 Announce Type: replace Abstract: Public access to pulse-level and control-electronics interfaces in commercial quantum computing has bifurcated. This paper proposes a six-axis rubric for measuring control-plane openness, the layer between gate-level circuit specification and physical control electronics, defined operationally so that the same evidence produces the same grade across vendors. The rubric is validated three ways: a blinded re-grading pass, thirty-nine days after the evidence cutoff, that tests whether the cited evidence and the level definitions alone reproduce the recorded grades; a boundary-case methodology that fixes where each level begins and ends; and a published grading protocol that lets others reproduce and contest any cell. We establish that the rubric measures change rather than describing a snapshot by comparing the catalog against the documented control plane before the February 2025 removal of pulse-level access from IBM hardware, and reporting the cells that moved. The rubric is applied to thirteen commercial vendors across superconducting, trapped-ion, neutral-atom, and photonic modalities as of May 1, 2026, as its first application, and one of the three harms the rubric is designed to detect is demonstrated through a reproduction-access audit of five pre-2025 IBM Qiskit Pulse experiments against the access available on current hardware, carried through to a client-side structural port of the audit's selected target to Rigetti Quil-T. The catalog ships as a separate machine-readable artifact under CC-BY-4.0 with per-cell source URLs (https://doi.org/10.5281/zenodo.20163276). The catalog readings will change as vendor policies shift; the rubric is the contribution that survives them.

02.
arXiv (CS.LG) 2026-06-18

BLADE: Scalable Bi-level Adaptive Data Selection for LLM Training

arXiv:2606.18650v1 Announce Type: new Abstract: As Large Language Model (LLM) datasets scale to trillions of tokens, data selection has emerged as a critical frontier to filter out uninformative noise and construct adaptive learning trajectories. Beyond static heuristic filtering, advanced data selection methods for LLM training largely follow two paradigms, each with fundamental limitations. Influence-based methods provide principled bi-level objectives but require intractable inverse-Hessian computations, while excess-loss methods are computationally efficient but rely on a static reference model that becomes misaligned with the evolving proxy model during training. We propose BLADE (Bi-Level Adaptive Data sElection), a Hessian-free framework for data selection. BLADE reformulates the bi-level optimization problem underlying influence-based methods as a penalized single-level objective via Lagrange multipliers, avoiding inverse-Hessian computation while revealing a principled connection to excess-loss based data selection. The resulting objective recovers an excess-loss form but replaces the static reference model with a dynamic one that stays synchronized with training. Theoretically, we prove that this penalized formulation guarantees first-order convergence. For efficient online batch selection, we instantiate BLADE as a memoryless randomized block-coordinate Frank-Wolfe algorithm. Extensive experiments show that BLADE consistently outperforms state-of-the-art data selection baselines, providing a practical recipe for LLM training.

03.
arXiv (CS.AI) 2026-06-19

Confidence Calibration for Multimodal LLMs: An Empirical Study through Medical VQA

arXiv:2606.19950v1 Announce Type: cross Abstract: Multimodal Large Language Models (MLLMs) show great potential in medical tasks, but their elicited confidence often misaligns with actual accuracy, potentially leading to misdiagnosis or overlooking correct advice. This study presents the first comprehensive analysis of the relationship between accuracy and confidence in medical MLLMs. It proposes a novel method that combines Multi-Strategy Fusion-Based Interrogation (MS-FBI) with auxiliary expert LLM assessment, aiming to improve confidence calibration in Medical Visual Question Answering (VQA). Experiments demonstrate that our method reduces the Expected Calibration Error (ECE) by an average of 40\% across three Medical VQA datasets, significantly enhancing MLLMs' reliability. The findings highlight the importance of domain-specific calibration for MLLMs in healthcare, offering a more trustworthy solution for AI-assisted diagnosis.

04.
arXiv (quant-ph) 2026-06-19

Unleashing Emergent Fermions with Rydberg Atom Simulators

arXiv:2606.19444v1 Announce Type: cross Abstract: Rydberg atom simulators, in both analog and digital modes, have attracted significant recent interest due to their versatile geometric reconfigurability. In this work, leveraging this feature, we propose two complementary approaches, one for each mode, to characterize emergent fermions in critical quantum many-body systems. In the analog mode, we assemble the Rydberg atoms in a "developable" (namely, preserving local couplings) Möbius band geometry to realize antiperiodic boundary conditions, where fermionic states reside. Spectroscopic measurement in this sector then reveals universal energy ratios of the bosonic and fermionic states. In the digital mode, we carry out a fermionic version of Kibble-Zurek ramping with a quantum circuit, directly addressing the fermionic scaling form. Reconfigurability allows an exponential speed-up of this task, with an $O(\log L\log\log L)$ circuit-depth overhead. Our work establishes the Rydberg atom simulator as a uniquely powerful platform to attack the notoriously difficult issue of experimentally probing emergent fermions that are nonlocally defined in a bosonic system.

05.
arXiv (CS.AI) 2026-06-17

Functional Equivalence in Attention: A Comprehensive Study with Applications to Linear Mode Connectivity

arXiv:2606.17830v1 Announce Type: cross Abstract: Neural network parameter spaces are inherently non-injective, as distinct parameter configurations can realize identical functions through functional equivalence. While this symmetry is well understood in classical fully connected and convolutional models, it becomes substantially more intricate in modern attention-based architectures. Existing analyses of multihead attention have largely focused on the vanilla formulation, overlooking positional encodings that fundamentally reshape architectural symmetries. In this work, we provide a formal study of functional equivalence in Transformers with positional encodings. Focusing on the two most widely used variants–sinusoidal and rotary positional encodings (RoPE)–we show that sinusoidal encodings preserve the equivalence structure of vanilla attention, whereas rotary encodings significantly reduce the symmetry group, thereby enhancing expressivity. This offers a principled explanation for the growing prominence of RoPE in practice. We further examine how positional encodings affect linear mode connectivity, and through an alignment algorithm, empirically demonstrate that the presence and variability of connectivity across Transformer settings crucially depend on the positional encoding.

06.
arXiv (quant-ph) 2026-06-19

Fidelity bounds for adiabatic gates and other quantum operations with time-dependent dissipation

arXiv:2606.20501v1 Announce Type: new Abstract: As quantum-computing platforms are susceptible to noise, the fidelity of quantum operations is limited by decoherence. Understanding this limitation is crucial for building utility-scale quantum processors. In previous works [Phys. Rev. Lett. 129, 150504 (2022); Quantum 9, 1684 (2025)], we presented analytical formulae for the average gate fidelity of multi-qubit operations under static Markovian noise processes, including operations that temporarily leave the computational subspace. However, some quantum-computing architectures dynamically modulate qubit or coupler frequencies to implement two-qubit gates, e.g., baseband flux gates; such modulation can lead to dissipation rates varying in time. In this Letter, we therefore generalize the fidelity-reduction formulae to encompass time-dependent dissipation. Applying our generalized formula, we obtain a fidelity bound for adiabatic operations and demonstrate that flux-dependent noise sensitivity, combined with qubit-coupler hybridization, significantly reduces the fidelity of adiabatic controlled-Z (CZ) gates in superconducting quantum computers. Our work thus provides essential theoretical tools for evaluating error budgets and optimizing the design of quantum operations in tunable quantum-computing architectures, and may also find applications in quantum-sensing and quantum-communication protocols that are affected by time-dependent dissipation.

07.
arXiv (CS.CL) 2026-06-11

Vector Quantized Latent Concepts: A Scalable Alternative to Clustering-Based Concept Discovery

Large language models (LLMs) encode rich semantic information in their hidden states, yet it remains difficult to understand what information these internal representations capture. Latent concepts extracted from hidden states offer a promising direction for interpreting LLMs, but existing clustering-based methods face a trade-off: hierarchical clustering produces coherent concepts but is limited to small datasets due to its quadratic memory cost, while K-Means scales efficiently but may yield less semantically coherent concepts. We propose Vector Quantized Latent Concept (VQLC), a discrete concept learning framework that learns a codebook of latent concepts on frozen hidden states. Across 12 dataset-model settings, VQLC stays close to K-Means in computational cost, scales better than hierarchical clustering, and remains competitive in faithfulness, with the clearest gains on decoder-only models. LLMs-based evaluation, qualitative analysis, and a Sparse Autoencoder (SAE) comparison demonstrate that the learned concepts are interpretable and task-relevant.

08.
arXiv (CS.CV) 2026-06-19

S-Agent: Spatial Tool-Use Elicits Reasoning for Spatial Intelligence

Real-world spatial intelligence requires reasoning over a continuous and evolving 3D world, yet existing VLMs and tool-augmented agents largely remain tied to static, stateless inference from isolated visual observations. We introduce \textsc{S-Agent}, a spatial tool-use agentic paradigm for understanding and reasoning over continuous multi-view images and videos. By formulating spatial reasoning as spatio-temporal evidence accumulation rather than isolated frame-level prediction, \textsc{S-Agent} reshapes spatial perception into scene-centric understanding beyond frame-centric recognition. Specifically, \textsc{S-Agent} casts the VLM as a semantic planner that decides what evidence is needed, while a hierarchy of spatial tools and experts grounds objects in 2D, lifts them into 3D geometric evidence, and aggregates this evidence into high-level spatial knowledge (e.g., counting, measurement, orientation, and relative position). Additionally, a temporal memory mechanism, including Scene Memory for maintaining the evolving scene state and Agent Memory for accumulating reasoning context, enables evidence integration across frames and reasoning steps. Comprehensive experiments on multi-view and video spatial reasoning benchmarks show that \textsc{S-Agent} consistently improves both open-source and closed-source VLMs in a training-free manner. Beyond inference-time augmentation, supervised fine-tuning (SFT) on \textsc{S-Agent}-generated spatial trajectories \textsc{S-300K} yields \textsc{S-Agent-8B}, a compact spatial agent that significantly surpasses similar-scale baselines (e.g., Qwen3-VL-8B) and performs comparably to advanced closed-source models (e.g., GPT-5.4 and Gemini 3).

09.
arXiv (CS.LG) 2026-06-16

Bayesian Optimization for Learning Nonlinear MPC in Autonomous Agent Navigation

arXiv:2606.14763v1 Announce Type: cross Abstract: Real-time autonomous navigation in dynamic, unknown environments remains a fundamental challenge for mobile robotics. We propose a map-free framework that tightly integrates reactive rolling-horizon planning with nonlinear Model Predictive Control (MPC). At each control cycle, a LiDAR-based Gaussian occupancy representation is constructed and used to generate collision-free trajectories via A* search, which are then tracked by a CasADi/IPOPT MPC formulation incorporating a smooth sigmoid obstacle barrier. To improve robustness to parameter sensitivity, we adopt an offline Bayesian optimization scheme based on Tree-structured Parzen Estimators (TPE), which identifies near-optimal controller parameters with respect to a composite navigation objective. In addition, a Gaussian Process surrogate is used to analyze parameter sensitivity and provide insight into the optimization landscape. The proposed framework is robot-agnostic and is evaluated on the Unitree Go2 quadruped in simulation using Gazebo, followed by deployment on the physical robot. Experimental results show that parameters tuned in simulation transfer effectively to hardware, maintaining comparable performance without additional tuning. The full system achieves up to a 90.0\% navigation success rate when deployed, along with a 38.9\% average improvement in the evaluation metrics across simulated environments.

10.
arXiv (CS.AI) 2026-06-12

A Mathematical Forum Platform for Collaborative Problem Solving and Dataset Generation for AI Reasoning

arXiv:2606.12976v1 Announce Type: new Abstract: Sharing mathematical content in online forums remains a significant friction point for students and educators: writing raw LATEX is error-prone, standalone optical character recognition tools require platform switching, and current forum software offers no integrated path from a photograph of a formula to a rendered post. We present a unified system that eliminates this friction by embedding an image to LATEX conversion pipeline directly inside a forum posting interface. A user uploads or captures an image of a mathematical expression; the system routes it through the Mathpix OCR API, detects whether the returned output is LATEX or plain text containing inline math, applies the appropriate delimiter normalisation, and renders a live preview in either LATEX or Markdown mode before the post is committed to the database. The architecture is organized in three loosely coupled layers: image processing, rendering, and storage, and supports both desktop and mobile clients. A provisional US patent application has been filed covering the core methods. We describe the full system design, each component in detail, the data schema, and the key technical innovations, and we position the work against existing standalone tools and forum platforms to demonstrate the practical gap it closes. Beyond immediate usability, we argue that a deployed platform of this kind constitutes a continuously growing, community-validated dataset of mathematical problems and step-by-step solutions, a resource that can be used to train and benchmark AI systems for accurate mathematical reasoning

11.
arXiv (CS.CV) 2026-06-12

Learning Task-Aware Sampling with Shared Saliency through Density-Equalizing Mappings

In image and surface-based learning tasks, convolutional features are typically extracted using receptive fields that are sampled uniformly across the entire domain. However, informative structures are rarely distributed uniformly in practice and are often concentrated in localized regions. Such phenomena are particularly common in medical imaging, where pathological changes are spatially confined. Consequently, uniform convolution allocates equal computational effort to both informative and uninformative regions, resulting in inefficient feature extraction and suboptimal utilization of model capacity. To address this issue, we propose a framework for task-adaptive sampling that dynamically redistributes computational attention according to the spatial importance of the data. Specifically, we introduce the Density-Equalizing Convolutional Neural Network (DECNN), which employs density-equalizing mappings to guide convolution through a learned density function. The density function encodes the relative importance of different regions and induces a transformation that enlarges informative areas while compressing less relevant ones. As a result, convolutional receptive fields are redistributed non-uniformly over the domain, enabling denser sampling in task-relevant regions. By coupling this importance-driven transformation with convolution, DECNN performs adaptive feature extraction that focuses computational resources on informative structures. This leads to more efficient use of model capacity, yielding a lightweight yet expressive architecture while simultaneously producing an interpretable saliency map. Experiments on image classification and craniofacial surface analysis demonstrate that DECNN achieves competitive or superior performance with fewer parameters, accurately identifies task-relevant regions, and remains robust under complex geometric variations.

12.
arXiv (quant-ph) 2026-06-16

Optimizing resource bounds in direct fidelity estimation

arXiv:2606.16336v1 Announce Type: new Abstract: Direct fidelity estimation provides a way to estimate the fidelity between an experimentally prepared state and a desired pure target state without performing full tomography. Two influential formulations were introduced in 2011 by Flammia and Liu and by da Silva, Landon-Cardinal, and Poulin. In these protocols, the total estimation error is controlled through two distinct probabilistic steps: first, the fidelity is approximated using randomly sampled Pauli observables; second, each sampled expectation value is estimated from finitely many measurement outcomes. In this work we show that additional structural information about the noise can substantially sharpen the corresponding resource bounds. In particular, for some canonical channels the effective number of sampled Pauli settings can be reduced, leading to lower measurement cost both in the general pure-state setting and in the case of a stabilizer state. These results illustrate a broader point: worst-case confidence bounds in direct fidelity estimation can be significantly conservative when experimentally relevant structure is ignored. As a technical ingredient, we also revisit the allocation of the total accuracy and confidence budgets between the two probabilistic steps. Reformulating the analysis in terms of separate error parameters yields a constrained optimization problem whose solution lowers the average number of measurements in the general pure-state setting. Numerical simulations based on quantum circuits implemented in Qiskit illustrate both the improvement obtained under structured-noise assumptions and the conservativeness of the original worst-case bounds.

14.
arXiv (quant-ph) 2026-06-11

Single Photon Cross-Phase Shifts Can Be Enhanced by Localization in both Frequency and Time

arXiv:2606.11516v1 Announce Type: new Abstract: Single-photon optical nonlinearities face a fundamental trade-off: maximum nonlinearity requires both spectral resonance (narrow bandwidth) and high peak intensity (short duration), constraints that are incompatible due to the time-energy uncertainty relation. We demonstrate experimentally that this limitation does not need to exist in cases involving post-selection. We measure a cross-phase shift (XPS) produced by a resonant photon from a narrow-band source that is first transmitted through a cold atomic cloud and then localized in time through detection. The peak size of this XPS is greatly enhanced compared to that of Gaussian single-photon-level pulses without post-selection, benefiting from the narrow bandwidth of the resonant prepared state and the high intensity of the post-selected state simultaneously. We measure enhancements in the peak XPS of 6$\pm$1 at an optical depth (OD) of 2.4$\pm$0.1, and our results are in qualitative agreement across a range of optical depths with the recently developed weak value theory of atomic excitation [Thompson et al., APL Quantum 2, 036108 (2025)] for such post-selected photons. This work uncovers new consequences of having simultaneous knowledge of frequency and time, raising new foundational questions about how a particle behaves, and interacts with other systems, when its preparation and post-selection are non-commuting.

15.
arXiv (CS.CL) 2026-06-19

Disentangling Linguistic Relatedness from Task Alignment in Cross-Lingual Transfer

We study cross-lingual transfer by fine-tuning seven large language models (4B–671B parameters) on Arabic and evaluating zero-shot reading comprehension on Semitic languages and non-Semitic controls. Across dense and Mixture-of-Experts architectures, we find no evidence of Semitic-specific transfer: models with weak baselines improve dramatically across all languages, while strong-baseline models show only marginal gains regardless of language family. A chain-of-thought ablation reinforces this finding – the same models that benefit most from fine-tuning benefit equally from inference-time reasoning, suggesting both mechanisms address task-format alignment rather than cross-lingual knowledge transfer.

16.
arXiv (CS.CV) 2026-06-17

Seeing Is Not Screening: Multimodal Hidden Instruction Attacks on Agent Skill Scanners

Agent skills are emerging as an important attack surface in LLM-based systems. Through an empirical study of existing skill scanners, we find that current defenses primarily rely on textual descriptions, manifests, and source code as the main signals for security analysis, which can leave visually conveyed malicious intent insufficiently examined. This creates a practical blind spot: harmful operational instructions hidden in images may bypass scanning while still being recoverable by multimodal agents during deployment. To systematically investigate this threat, we propose SkillCamo, a document-mediated multimodal instruction attack that conceals malicious instructions within images bundled with a skill while rewriting the surrounding documentation to naturally reference those images as part of the normal workflow. Thus, the attack does not rely on the image alone, but on the joint interpretation of textual guidance and visual payload at execution time. To defend against such attacks, we further propose ExecScan, an execution-grounded multimodal scanning module that performs intent extraction, behavior reconstruction, abuse assessment, and deliberative execution simulation over skill artifacts. ExecScan jointly analyzes documentation, code, referenced resources, and visual content to recover hidden instructions, reconstruct executable behavior chains, and identify downstream risks such as exfiltration, destruction, persistence, deception, and privilege escalation. Extensive experiments show that image-hidden malicious instructions challenge existing skill scanners, while ExecScan can improve the skill scanning performance.

17.
arXiv (CS.AI) 2026-06-12

From AGI to ASI

arXiv:2606.12683v1 Announce Type: new Abstract: Over the last decade, building human-level artificial general intelligence has moved from far-fetched speculation to being a concrete next-decade target for many of the largest AI organisations. Achieving this goal would have profound and far-reaching impacts on human society, which raises many complex questions for the decade ahead. This report investigates how AI itself might continue to develop in a post-AGI world along the continuum of machine intelligence. The endpoint of this continuum, Universal AI, is theoretically well understood, which provides some formal grounding for the main focus of this report: the transition from human-level AGI to artificial general superintelligence, which, intuitively, can be understood as a system that is more intelligent and cognitively capable than large organisations of humans. After characterizing ASI, the report discusses four potential pathways from AGI to ASI: scaling AGI, AI paradigm shifts, recursive improvement, and ASI emerging from large-scale multi-agent collectives. The report then discusses possible frictions and bottlenecks along these pathways. Determining whether the impact of these frictions will be negligible or substantial raises a number of concrete open research questions. Due to large uncertainties for predicting ASI progress, it cannot be ruled out that AI progress might continue to accelerate over the next years. This could imply that the image of a single transformative step change, caused by the introduction of human-level AGI into our society, could be inaccurate. More apt might be the prospect of a series of transformative societal changes caused by AI-enabled progress and breakthroughs across many areas of science and technology. Preparing for this prospect requires a massively interdisciplinary endeavour of global scope and interest.

18.
arXiv (CS.AI) 2026-06-11

Multimodal Ordinal Modeling of Alzheimer's Disease Severity Using Structural MRI and Clinical Data

arXiv:2606.11794v1 Announce Type: cross Abstract: Neurodegenerative diseases such as Alzheimer's disease (AD) require accurate and scalable tools for assessing disease severity, yet current clinical staging remains time-intensive and prone to variability. We propose an attention-enhanced multimodal machine learning framework with ordinal regression for automated and interpretable AD severity staging. The framework integrates T1-weighted MRI with demographic and genetic variables and compares unimodal and multimodal architectures using ordinal and non-ordinal prediction heads. Models were trained and validated using cohort-stratified splits derived from the ADNI, AIBL, and NIFD datasets. A strictly held-out test set was constructed using subjects excluded from all training, validation, preprocessing, and hyperparameter tuning procedures, with subject-level splitting employed throughout to prevent data leakage. Among unimodal approaches, the T1-weighted MRI model achieved slightly higher adjacent-stage accuracy (0.963) and agreement with clinical staging (QWK 0.444) than the tabular model (QWK 0.433). Integrating imaging, demographic, and genetic information improved overall performance. The multimodal non-ordinal baseline achieved the lowest prediction error (MAE 0.340), whereas the ordinal multimodal model achieved the highest adjacent-stage accuracy (0.970) and strongest agreement with clinical staging (QWK 0.549). These findings indicate that ordinal formulations better capture the ordered structure of the CDR scale and yield predictions more consistent with clinical staging. Explainability analyses using Grad CAM++ and SHAP demonstrated anatomically and clinically plausible model behavior, supporting transparent decision-making. Overall, attention-based multimodal learning with ordinal regression represents a robust, interpretable, and scalable approach for automated AD severity staging and AI-assisted clinical decision support.

20.
arXiv (CS.CV) 2026-06-15

SMART: Scalable Mesh-free Aerodynamic Simulations from Raw Geometries using a Transformer-based Surrogate Model

Machine learning-based surrogate models have emerged as more efficient alternatives to numerical solvers for physical simulations over complex geometries, such as car bodies. Many existing models incorporate the simulation mesh as an additional input, thereby reducing prediction errors. However, generating a simulation mesh for new geometries is computationally costly. In contrast, mesh-free methods, which do not rely on the simulation mesh, typically incur higher errors. Motivated by these considerations, we introduce SMART, a neural surrogate model that predicts physical quantities at arbitrary query locations using only a point-cloud representation of the geometry, without requiring access to the simulation mesh. The geometry and simulation parameters are encoded into a shared latent space that captures both structural and parametric characteristics of the physical field. A physics decoder then attends to the encoder's intermediate latent representations to map spatial queries to physical quantities. Through this cross-layer interaction, the model jointly updates latent geometric features and the evolving physical field. Extensive experiments show that SMART is competitive with and often outperforms existing methods that rely on the simulation mesh as input, demonstrating its capabilities for industry-level simulations.

21.
arXiv (CS.AI) 2026-06-12

The Challenges of Balancing AI Compliance and Technological Innovations in Critical Sectors: A Systematic Literature Review

arXiv:2606.12423v1 Announce Type: cross Abstract: The rapid integration of artificial intelligence (AI) into critical infrastructure including healthcare, finance, energy, and defense, offers transformative benefits but also conflicts with evolving regulatory and governance frameworks. This paper presents a systematic literature review (SLR) to examine the challenges of balancing AI compliance and technological innovation across critical infrastructure sectors. The review follows established SLR guidelines to extract and synthesize insights from peer-reviewed articles, report, and institutional sources published between 2020-2025. The study identifies three interrelated challenges: fragmented regulations, excessive compliance burdens for smaller to medium enterprises (SMEs), and misaligned governance models. To address these challenges, the study highlights practical governance strategies, including risk-tiered regulation, compliance by design, and explainable AI, to support scalable and trustworthy AI deployment in critical sectors. Key contributions include a concise mapping of core AI-governance challenges and a conceptual diagram illustrating their overlap, as well as actionable strategies for policymakers and practitioner to harmonize oversight with innovation.

22.
Nature (Science) 2026-06-15

Daily briefing: Iron-Age human bones were made into tools before interment

作者:

Newly uncovered bones hint at how Iron Age Britons treated their dead. Plus, AI models have failed to beat human mathematicians at research-level problems and the everyday items that make great scientific tools. Newly uncovered bones hint at how Iron Age Britons treated their dead. Plus, AI models have failed to beat human mathematicians at research-level problems and the everyday items that make great scientific tools.

23.
arXiv (CS.LG) 2026-06-18

Bridging Data Gaps in Structural Fragility Modeling through Transfer Learning: Methodology and Case Studies

arXiv:2606.18567v1 Announce Type: cross Abstract: This paper presents a methodology-centered transfer learning framework for fragility adaptation under domain shift, class imbalance, and scarce target labels while preserving engineering interpretability and supporting decision-making under uncertainty. Four transfer learning strategies (instance-based, parameter-based, hierarchical Bayesian, and multi-source) are demonstrated through three complementary case studies: (i) instance-based transfer learning via importance weighting, demonstrated on coastal bridge fragility using Hurricane Katrina observations; (ii) parameter-based transfer learning together with hierarchical Bayesian transfer learning, enabling partial pooling across strata and posterior uncertainty quantification, demonstrated on residential building fragility using Hurricane Ian observations; and (iii) multi-source transfer learning that fuses multiple analytical fragility models with learned source weights and regularized target-domain adaptation, demonstrated on seismic bridge fragility using observations from the 2001 Nisqually earthquake. Across these case studies, direct transfer of source models (i.e. using existing state-of-the-art models) fails under domain shift and severe class imbalance, while targeted adaptation substantially improves failure detection and predictive stability in low-data regimes. These findings highlight the need for systematic guidance on diagnostics, strategy selection, and uncertainty reporting when developing and adapting fragility models.

24.
arXiv (CS.CV) 2026-06-18

Sensor Configuration Matters: A Systematic Evaluation of Multimodal SLAM on Quadruped Robots

Autonomous navigation of quadrupedal robots in diverse environments fundamentally relies on resilient Simultaneous Localization and Mapping (SLAM). While visual-inertial SLAM has matured across wheeled, handheld, and aerial platforms, a critical evaluation gap remains regarding how hardware-level sensor configurations affect performance under the aggressive dynamics of legged locomotion. Quadrupeds introduce distinct embodiment-induced sensory challenges, including foot-impact shocks, high-frequency mechanical vibrations, and rapid angular rotations, which degrade standard perception pipelines. To address this gap, we present a systematic evaluation of state-of-the-art visual, visual-inertial, and LiDAR-visual-inertial SLAM methods using the GrandTour dataset recorded on an ANYmal D quadruped. We isolate and quantify the impacts of camera modalities, shutter techniques, and inertial sensor tiers, analyzing their trade-offs across localization accuracy, algorithmic robustness, and computational resource utilization. Our empirical findings demonstrate that hardware selection has substantial influence on system resilience: stereo configurations consistently outperform monocular and RGB-D modalities, global shutter cameras significantly mitigate motion-induced tracking failures compared to rolling shutter cameras, and, crucially, standard inertial integration can degrade the performance of primarily vision-based frameworks under harsh legged locomotion. These insights additionally offer concrete design guidelines for tailoring custom sensor payloads to achieve dependable perception on agile legged systems.

25.
arXiv (CS.CV) 2026-06-12

Context-Aware Feature-Fusion for Co-occurring Object Detection in Autonomous Driving

Object detection in autonomous driving requires precise localization and an inherent understanding of the relational context between co-occurring objects. In extremely complex heterogeneous environments rare classes, small-scale objects, and frequently appearing objects are difficult for standard object detection frameworks to handle. In this paper, we propose a novel framework called Context-Centric Feature Fusion (CCFF), which utilizes two attention-based modules, Local Context Fusion Module (LCFM) uses the RoI-to-RoI self-attention mechanism to resolve spatial interactions, mainly considering small and partially obscured objects, while Global Context Attention Module (GCAM) converts the co-occurrence of objects priors by pooling top-K RoI features into a global context attention token, avoiding the computational overhead of pixel-level global pooling. This fusion of local and object-centric global features yields contextualized embeddings that enhance classification results and co-occurring objects detection. Our method is evaluated on two datasets, Cityscapes and BDD100K which demonstrate significant improvement on relational consistency, achieving a Category-level Consistency Strategy (CCS) of 0.973 and 0.969, respectively. Furthermore, our approach produces substantial gains in small object detection (AP_S: 14.1%) and successfully recovers rare classes such as "Train" that are typically lost in large distributions. Our efficiency report shows that the framework processes images in real time with a 0.2 FPS overhead. The code is available at https://github.com/BinayKSingh/CCFF.