Academic Intelligence · Curated Daily

探索全球前沿学术脉络

AcademicHub 汇聚顶级期刊与预印本平台的实时文献。定制您的专属科研雷达,利用大语言模型自动生成交叉领域文献分析简报。

01.
arXiv (CS.AI) 2026-06-19

Zero-Inflated Gaussian Distributions Enable Parameter-Space Sparsity in Estimation-of-Distribution Algorithms

arXiv:2606.19369v1 Announce Type: cross Abstract: Estimation-of-distribution algorithms (EDAs) are a powerful class of evolutionary methods for black-box optimization, especially when little is known about the structure of the objective. Whereas classical evolutionary algorithms rely on hand-designed mutation and crossover operators, hard to devise for unknown problem structures, and a source of bias, EDAs sidestep operator design entirely: they fit a probability distribution to the best individuals and sample the next generation from it. EDAs are well established on continuous parameter spaces, but they have not previously been generalized to sparse ones, in which most coefficients of a good solution are exactly zero. Existing sparse black-box optimizers therefore reintroduce exactly what EDAs were designed to avoid: hand-crafted sparsity operators, bi-level schemes alternating between support set and active values, zeroing thresholds, and other baked-in assumptions. We close this gap by proposing multivariate zero-inflated Gaussian (ZIG) distributions as EDA sampling laws. A latent Gaussian model with separate indicator and value dimensions represents sparsity patterns, correlations among active parameters, and the interactions between the two, so sparsity patterns and active values are optimized jointly, hierarchy-free. We show that the latent parameters of this model are identifiable from observed samples, unlike in the missing-data settings where related constructions originate, and introduce practical amortized inversion-based estimators for them. The estimators accurately recover latent correlation structures, and on the Lunar Lander benchmark the resulting ZIG-EDA converges faster and reaches higher final returns than a dense Gaussian EDA, a hand-crafted sparse evolutionary algorithm, and an ad-hoc sparse EDA, while finding controllers with only a small fraction of parameters active.

02.
arXiv (quant-ph) 2026-06-16

Lattice surgery for near-term experimental logical qubit entanglement creation in planar architectures

arXiv:2606.15190v1 Announce Type: new Abstract: In the era of early fault-tolerant quantum computing, basic demonstrations of entanglement operations between a few logical qubits are at the frontier of recent developments in quantum computing. In this work, we describe in detail, at both the logical and physical qubit levels, a logical teleportation protocol between two surface code logical qubits based on lattice surgery. We address several aspects of the teleportation protocol pertinent to superconducting qubit architectures. We explore the modularity constraints in the number and location of stabilizer readouts and compare variants of the teleportation protocol in this regard. Additionally, we investigate potential performance improvements related to in-sequence decision logic and the optimal size of the interface region between two surface code patches on a superconducting chip. Based on our simulations, we show possible near-term improvements in lattice surgery protocols that facilitate fault-tolerant quantum computing in superconducting circuit architectures.

03.
Nature Biotechnology 2026-06-05

Multiplexed, precise genome engineering in monocots with twin prime editing systems

作者:

Simultaneously introducing diverse genomic edits remains a challenge in crop genome engineering. Here we describe a twin prime editing-based knockout (TKO) system that installs stop codon clusters (SCCs) for precise translational termination with minimal in-frame mutations. TKO achieves knockout efficiencies of up to 70.5%, 58.6% and 75.1% in rice, maize and wheat protoplasts, respectively, and produces heritable knockout alleles in 96.8% of regenerated rice plants. In hexaploid wheat, TKO outperforms Cas9 4.2-fold in generating triple-homolog knockouts, largely by reducing in-frame mutations. Orthogonal TKO editors with sequence-divergent SCCs enable simultaneous knockout of up to ten genes without cross-interference. Integration of TKO with conventional prime editing establishes TRIM1 (TKO editor-enabled gene rupture and development of integrated multitype genome modification system) for simultaneous knockout and precise editing, achieving a 22.8% coediting of four genes in rice. TRIM2 extends this capacity to kilobase-scale modifications through a prime editor–recombinase system, enabling a 4.9-kb insertion (1.2% efficiency) and gene knockout (up to 79.8%) in protoplasts. Plant genome editing is multiplexed with twin prime editing.

04.
arXiv (quant-ph) 2026-06-11

Fun with Graph States: Nonlocal Bell Pairs and the Arf Invariant

arXiv:2606.06582v2 Announce Type: replace Abstract: We study inner products and partial amplitudes of graph states–a commonly employed class of quantum states, which are specified by graphs. We find that the magnitudes of these quantities are simply related to the rank of the adjacency matrix of the graph over F_2 while the phase is determined by the Arf invariant of its quadratic refinement. These facts motivate a nonlocal tensor factorization of the Hilbert space, with respect to which all graph states are products of Bell pairs with unentangled ancillae. These results may illuminate the quantum advantage in the framework of Measurement-Based Quantum Computation and suggest that graph states can be usefully visualized in the language of algebraic topology. In addition, we develop a specialized technique for computing expectation values of qubit-wise permutations in graph states, which is useful for calculating multi-invariants.

05.
medRxiv (Medicine) 2026-06-22

Multisite Real-World Validation of an Electronic Health Record-Integrated Generative Artificial Intelligence Tool for Venous Thromboembolism Risk Stratification

Background: Guiding risk-appropriate inpatient thromboprophylaxis requires venous thromboembolism (VTE) risk stratification; however, reliable risk determination remains inconsistent in routine care. Health systems increasingly pilot artificial intelligence (AI) tools, yet few studies demonstrate rigorous evaluation in the context of a learning health system (LHS). We evaluated the performance of a pilot electronic health record (EHR)-integrated generative AI (GenAI) system, inHealth General Reasoner (iHGR), for VTE risk stratification versus clinician order set classifications and physician-adjudicated chart review. Methods: This multisite retrospective validation study included adult inpatient admissions at Johns Hopkins Medicine between June 21, 2025, and Dec 18, 2025 (checklist-based order set from June 21, 2025 - November 19, 2025, and clinician judgement-based order set from November 29 - December 18, 2025). From 758 eligible admissions, we randomly sampled 500 balanced by site and order set periods. iHGR and clinician-selected order set classifications were compared with the reference standard (RS). Primary outcomes were iHGR sensitivity and specificity. Secondary analyses compared the order sets with the same RS to evaluate workflow comparators and error patterns. Results: iHGR achieved 81.8% sensitivity (95% CI 77.3-85.6) and 70.9% specificity (63.6-77.3). The checklist-based order set had 61.3% sensitivity (53.7-68.5) and 86.2% specificity (77.4-91.9). The clinician judgement-based order set had 78.1% sensitivity (71.3-83.7) and 65.4% specificity (54.3-75.0). False-negative iHGR classifications were associated with missed narrative risk factors. Conclusion: iHGR showed higher sensitivity for VTE risk than checklist-based order sets and clinician judgement without introducing systematic bias. In silico evaluation of pilot AI systems within LHSs can identify clinically important performance trade-offs and implementation targets before operational scale-up. Narrative clinical data abstraction remained a key limitation, supporting the use of GenAI to support rather than supplant clinician judgement.

06.
arXiv (CS.CV) 2026-06-17

EmbodiTTA: Resource-Efficient Test-Time Adaptation for Embodied Visual Systems

Continual Test-time adaptation (CTTA) continuously adapts the deployed model on every incoming batch of data. While achieving optimal accuracy, existing CTTA approaches present poor real-world applicability on resource-constrained edge devices, due to the substantial memory overhead and energy consumption. In this work, we first introduce a novel paradigm – on-demand TTA – which triggers adaptation only when a significant domain shift is detected. Then, we present OD-TTA, an on-demand TTA framework for accurate and efficient adaptation on edge devices. OD-TTA comprises three innovative techniques: 1) a lightweight domain shift detection mechanism to activate TTA only when it is needed, drastically reducing the overall computation overhead, 2) a source domain selection module that chooses an appropriate source model for adaptation, ensuring high and robust accuracy, 3) a decoupled Batch Normalization (BN) update scheme to enable memory-efficient adaptation with small batch sizes. Extensive experiments show that OD-TTA achieves comparable and even better performance while reducing the energy and computation overhead remarkably, making TTA a practical reality.

07.
arXiv (math.PR) 2026-06-18

Very large cliques in a scale-free random graph

arXiv:2606.18722v1 Announce Type: new Abstract: In this short article we consider a preferential attachment random graph model with edge steps, studied by Alves, Ribeiro and Sanchis. Starting with an initial graph $\mathbb{G}_1$ formed by a vertex with a self-loop attached to it, the model evolves as follows. At every subsequent (discrete) time step, either with probability $p$ we add a vertex to the graph and connect it to exactly one of the older vertices selected with probability proportional to its degree, or with probability $1-p$ we add one edge between two existing vertices, both selected (independently) with probability proportional to their degrees. Let $\omega(\mathbb{G})$ be the clique number of a graph $\mathbb{G}$, i.e.\ the number of vertices in a largest complete subgraph of $\mathbb{G}_{}$. Alves, Ribeiro and Sanchis showed that, for any given $\varepsilon>0$, we have $\omega(\mathbb{G}_{2t})\geq t^{\frac{1-p}{2-p}(1-\varepsilon)}$ with high probability (i.e.\ with probability tending to $1$ as $t\rightarrow \infty$). Here we strengthen this bound by showing that, for any function $f:\mathbb{N}\mapsto \mathbb{N}$ that satisfies $f(t)\rightarrow \infty$ as $t\rightarrow \infty$, with high probability \[\omega(\mathbb{G}_{2t}) = \Omega\left(t^{\frac{1-p}{2-p}}\Big(\log^{\frac{1}{2-p}}(t)f(t)\Big)^{-1}\right).\]

08.
arXiv (CS.LG) 2026-06-15

When Language Representations Interact: Separability and Cross-Lingual Effects in LLMs

arXiv:2606.14347v1 Announce Type: new Abstract: Large language models exhibit strong multilingual capabilities, however, their internal representations are difficult to interpret. Understanding these interactions is important for ensuring reliable behavior in multilingual systems. Recent work has shown that causal-geometric structure can explain how certain concepts are encoded as approximately linear and separable directions, but whether this framework extends to multilingual models, where language identity is correlated and hierarchical, is underexplored. We apply causal-geometric analysis to multilingual LLMs, studying 28 bilingual contrasts across three models, allowing us to analyze when languages behave as approximately independent factors and when structured dependencies persist. We find evidence that language concepts admit stable linear representations that are largely separable under a covariance-adjusted (causal) inner product, with structured deviations reflecting linguistic similarity. Moreover, languages within the same family (such as Germanic or Romance) exhibit a simplex-like geometric structure, suggesting hierarchical organization. These results extend causal-geometric interpretability to multilingual settings and provide insight into how separability and similarity may exist in multilingual LLM representations, motivating interpretability analyses that diagnose when and how structured dependencies between concepts can be anticipated. This has implications for trustworthy deployment, as residual structure between languages may lead to unintended cross-lingual effects when models are monitored or intervened upon.

09.
arXiv (CS.LG) 2026-06-19

Unsupervised Causal Abstractions Discovery

arXiv:2606.19594v1 Announce Type: new Abstract: Causal abstractions formalize when a high-level structural causal model (SCM) captures the interventional behavior of a lower-level SCM. Existing applications of this notion largely follow a hypothesis-testing paradigm: an expert proposes a candidate high-level model and then evaluates if the low-level system implements it. We study the complementary problem of learning a high-level model directly from low-level measurements. Our contributions leverage hypotheses from low-rank causal discovery, and can be summarized as follows: (1) we show that observations generated by a low-rank graph induce latents that form a causal abstraction, (2) we provide identifiability results about these latents, and (3) we propose a practical objective to learn this high-level SCM.

10.
arXiv (CS.CV) 2026-06-16

No One Knows the State of the Art in Geospatial Foundation Models

Geospatial foundation models (GFMs) have been proposed as generalizable backbones for disaster response, land-cover mapping, food-security monitoring, and other high-stakes Earth-observation tasks. Yet the published work about these models does not give reviewers or users enough information to tell which model fits a given task. We argue that nobody knows what the current state of the art is in geospatial foundation models. The methods may be useful, but the GFM literature does not standardize evaluations, training and testing protocols, released weights, or pretraining controls well enough for anyone to compare or rank them. In a 152-paper audit, we find 46 cross-paper disagreements of at least 10 points for the same model, benchmark, and protocol; 94/126 papers with extractable pretraining data use a configuration no other paper uses; and 39% of GFM papers release no model weights. This lack of community standards can be solved. We propose six concrete expectations: named-license weight release, shared core evaluations, copied-versus-rerun baseline annotations, variance reporting, one shared evaluation harness, and data-vs-architecture-vs-algorithm controls. These gaps are a coordination failure, not a fault of any individual lab; the authors of this paper, like many others in the GFM community, have contributed to them. Rather than just critiquing the community, we aim to provide concrete steps toward a shared understanding of how to innovate GFMs.

11.
arXiv (CS.LG) 2026-06-11

Machine-learning-based multipoint optimization of fluidic injection parameters for improving nozzle performance

arXiv:2409.12707v2 Announce Type: replace-cross Abstract: Fluidic injection offers a promising solution to improve the performance of the overexpanded single expansion ramp nozzles (SERNs) during vehicle acceleration. However, determining the injection parameters that yield the best overall performance across multiple nozzle operating conditions remains a challenge. The gradient-based optimization method requires gradients of injection parameters at each design point, which can lead to high computational costs when using computational fluid dynamics (CFD) simulations. This paper uses a pretrained neural network to replace CFD during optimization, enabling quick calculation of the nozzle flow field at multiple design points. Considering the physical characteristics of the nozzle flow field, a prior-based prediction strategy is adopted to enhance the model's accuracy. In addition, the neural network's back-propagation algorithm computes gradients quickly by running the computation only once, thereby greatly reducing gradient computation time compared to the finite difference method. As a test case, the average nozzle thrust coefficient of an SERN at seven design points is optimized, resulting in a 1.14\% improvement. The time cost is greatly reduced compared with traditional optimization methods, even when the time required to establish the training database is included.

12.
medRxiv (Medicine) 2026-06-11

Parent and physiotherapist perceptions about movement skills of young children with juvenile idiopathic arthritis

Objective: The onset of juvenile idiopathic arthritis (JIA) in the early years ([≤]5 years) may negatively impact movement skill (encompassing related concepts of gross motor skills, fundamental movement skills, and functional ability) development. Few studies have explored the perceptions and needs of parents and physiotherapists towards children's difficulty with these movement skills, essential to identify potential areas for added support. The objective of this study is to understand the perceptions of physiotherapists and parents towards movement skills of children with JIA. Methods: Seventeen parents and 24 physiotherapists completed an online questionnaire consisting of multiple choice and open-ended questions about the movement skills of young children with JIA. Demographic and multiple choice questions were quantitively analysed using descriptive statistics. Open-ended responses were analyzed using qualitative conventional content analysis. Results: About half (47%) of parents perceived their children to have movement difficulties, and 75% of physiotherapists described the movement skills of children with JIA as worse than other children of the same age. Our qualitative analysis revealed three general themes including: functional task difficulties; clinical variability in movement skills; and psychosocial components of movement skill difficulties. Conclusion: This study provides an analysis of perceptions of physiotherapists and parents towards the movement skills of young children with JIA. A significant proportion of parents and physiotherapists identify movement difficulties among children with JIA that impact daily life. Future interventions co-designed with both parents and care providers targeting movement skills are needed.

13.
arXiv (CS.AI) 2026-06-15

VHDLSuite: Unified Pipeline for LLM VHDL Generation with Data Synthesis and Evaluation

arXiv:2606.13735v1 Announce Type: cross Abstract: Large Language Models (LLM) have shown impressive capabilities in Register Transfer Level (RTL) code generation, particularly for Verilog. However, evaluating their performance with other Hardware Description Languages (HDL), especially VHDL, remains limited although its distinct language characteristics, such as stricter semantic rules, introduce evaluation considerations that differ from Verilog. This lack of coverage restricts fully understanding of how well current models generalize across hardware design languages with differing structures and semantics. To address this gap, we introduce VHDLSuite, a benchmark-centered infrastructure for scalable VHDL generation evaluation, integrating automated benchmark synthesis, executable validation, and multi-model diagnostic analysis. First, we propose a data pipeline that automatically converts Verilog designs and their accompanying testbenches into executable VHDL benchmark instances, followed by VUnit/GHDL-based validation to ensure each released task is compilable, runnable, and consistently checkable in the VHDL environment. Second, we introduce VHDLBench, a benchmark with over 200 VHDL problems with complete and validated testbenches across a wide range of complexity levels. Third, we extensively evaluate cutting-edge LLMs and uncover key challenges specific on LLM-aided VHDL generation. Our findings provide important insights and support future work in multi-language hardware design automation.Our data pipeline, benchmark, and evaluation framework will be open-sourced.

14.
arXiv (CS.CV) 2026-06-16

Towards UAV Image Dehazing: A UAV Atmospheric Scattering Model, Benchmark, and Geometry-Aware Deep Unfolding Network

In UAV applications, haze significantly obscures distant details and weaken structural information, hindering the recovery of details. Current UAV scenarios still face two key challenges: (i) paired hazy/clean images from the real world are unobtainable, while the classical atmospheric scattering model is inadequate for modeling the spatially non-uniform haze in UAV imagery; (ii) existing dehazing methods struggle to remove the heavy haze accumulated in the upper regions of UAV images. To address these issues, we first propose a UAV Atmospheric Scattering Model (UASM), which explicitly incorporates flight altitude, viewing pitch, and extinction to characterize the non-uniform haze distribution in UAV imaging. Based on UASM, we develop a physics-driven dehazing framework, termed Geometry-aware Proximal Deep Unfolding Network (GP-DUN). Specifically, GP-DUN consists of three key modules: a Latent Geometry Estimator (LGE) that infers transmittance consistent with UAV imaging geometry, a Geometry-aware Gradient Descent Module (GeoGDM) that embeds UASM into the data-fidelity term and performs physics-consistent closed-form updates, and an Pooling-Expert Proximal Mapping Module (PE-PMM) that learns an implicit prior to restore textures and structures beyond the capability of explicit physical modeling. In addition, we further construct UASM-HazeSet, which provides controllable paired synthetic data together with 2,285 real UAV haze images for testing. Extensive experiments show that GP-DUN consistently outperforms existing methods on both UASM-HazeSet and real UAV haze benchmarks.

15.
arXiv (CS.AI) 2026-06-19

FlowMaps: Modeling Long-Term Multimodal Object Dynamics with Flow Matching

arXiv:2606.20209v1 Announce Type: cross Abstract: Joint spatial and temporal understanding of 3D scenes is a crucial requirement for robots deployed in everyday household environments. Such agents must not only comprehend and navigate spatial layouts, but also reason about how these spaces evolve over time. In particular, humans interact with objects daily, causing them to change position throughout the environment and making it difficult for robots to reliably associate current observations with previously seen objects. However, these interactions are not random: human habits and routines induce spatio-temporally consistent patterns in object locations, which robotic agents can potentially learn and then exploit for downstream tasks such as navigation. To this end, we introduce FlowMaps, a latent flow matching model for estimating multimodal distributions over the future locations of dynamic objects in a continuous 3D space. By learning the implicit dependencies among objects and their temporal evolution, FlowMaps predicts likely changes in object locations conditioned on past human interactions, while supporting generalization across previously unseen environments that share similar object routines. To demonstrate the utility of this method, we deploy FlowMaps in a downstream dynamic Object Navigation task in both simulated and real-world environments. Across more than 600 episodes, FlowMaps outperforms state-of-the-art approaches, showing that modeling object dynamics through continuous, multimodal spatio-temporal distributions improves robotic search and navigation in changing household environments. Code and additional material is available at https://fra-tsuna.github.io/flowmaps/.

16.
Nature (Science) 2026-06-22

Stereoretentive decarbonylative C(sp<sup>3</sup>)-C(sp<sup>3</sup>) cross-coupling

作者:

While C(sp3)–C(sp3) bond-forming cross-coupling methods have become more common, stereocontrolled bond-formation remains a challenge,1 despite its importance for drug discovery, where there is a emerging demand for molecules with increased sp3 character.2-4 Enantiospecific cross-coupling approaches would complement advances in enantioselective coupling,5-8 but have been limited to specialized substrates with lower availability5,9 because stereospecific oxidative addition of more abundant chiral alkyl electrophiles is unknown.10 Inspired by the classic, stereoretentive Curtius rearrangement,11 herein we disclose a catalytic strategy that proceeds by an analogous stereoretentive decarbonylation step to form a versatile chiral alkylnickel intermediate from easily-available chiral amino-acid and α-hydroxy-acid derivatives. The chiral alkylnickel intermediates decompose and/or racemize on the order of minutes, but are sufficiently stable to enable stereoretentive cross-electrophile coupling12 with alkyl radicals (derived from alkyl iodides) at relatively low temperature (22-40 °C). This mechanistic strategy provides a straightforward approach to stereocontrolled C(sp3)–C(sp3) bond formation, including diastereomers that are inaccessible by stereoselective radical mechanisms. The “metallo-Curtius” strategy described in this study lays a mechanistic foundation for the development many new stereospecific cross-coupling reactions.

17.
arXiv (CS.LG) 2026-06-16

Not All Retrievals are Useful: Cross-Attention for Input-Aware RAG in Time Series Forecasting

arXiv:2603.14709v2 Announce Type: replace Abstract: Retrieval-augmented generation (RAG) enhances zero-shot time series (TS) forecasting by leveraging external knowledge bases, yet existing approaches overlook input-level relevance when fusing retrieved samples with the query. We argue that not all retrievals are equally useful, and irrelevant ones can degrade performance. To this end, we propose Cross-RAG, a zero-shot RAG-based forecasting framework that selectively attends to query-relevant retrieved samples via query–retrieval cross-attention. By modeling input-level relevance between the query and retrieved samples, Cross-RAG jointly incorporates three sources of information: 1) the query itself, 2) the retrieved samples, and 3) their relational interactions. In particular, this input-aware design enables Cross-RAG to remain stable as the number of retrieved samples $k$ grows, whereas prior methods without cross-attention require careful $k$ tuning to avoid degradation from irrelevant retrievals. Extensive experiments demonstrate that Cross-RAG consistently improves zero-shot forecasting performance across multiple TSFM backbones and various RAG methods, with additional analyses confirming its effectiveness across various retrieval scenarios. Code is available at https://github.com/seunghan96/cross-rag/.

18.
arXiv (CS.CV) 2026-06-16

A Comprehensive Survey of Medical Image Segmentation: Challenges, Benchmarks, and Beyond

Medical image segmentation plays a critical role in clinical diagnostics, treatment planning, disease monitoring, and neurological disorder identification. This article presents a comprehensive review of its systematic development, covering widely used public datasets, representative methods built on the U-Net, Transformer, and SAM architectures, and key evaluation metrics with their differences, followed by an analysis of major challenges from multiple perspectives. Unlike surveys that focus on a single model family or a specific clinical application, this review organizes U-Net-, Transformer-, and SAM-based methods within a unified analytical framework, with a particular focus on their effectiveness in improving segmentation accuracy and efficiency. This work aims to guide future research and support clinical translation of medical image segmentation, with all related resources publicly available in our GitHub repository: https://github.com/andrew-pengyu/Awsome_MedSeg/tree/main.

19.
arXiv (CS.CV) 2026-06-16

DragMesh-2: Physically Plausible Dexterous Hand-Object Interaction with Articulated Objects

Dexterous interaction with articulated objects is important for household, assistive, and humanoid manipulation, where multi-finger hands can provide compliant contact patterns beyond parallel-jaw grasping. However, articulated-object manipulation differs from static-object manipulation: the target part cannot be directly actuated, and its motion must emerge through sustained physical hand–handle contact. This makes the transition from object-centric articulated generation to hand-driven dexterous hand–object interaction non-trivial, since geometric trajectory replay or open-loop execution does not model the contact dynamics required to move the articulated part. Moreover, policies trained only for task completion under fixed dynamics can overfit nominal contact loads, especially without tactile or force feedback, and may degrade when the contact load changes. To address these challenges, we present DragMesh-2, a contact-driven framework for dexterous interaction with articulated objects that extends articulated interaction from object-centric generation to hand-driven dexterous hand–object interaction, where articulated motion must arise through physical contact. We further propose PICA, a physically informed contact-aware training mechanism that injects physical signals into policy learning without tactile or force feedback, improving robustness and task success under changing contact loads. Finally, we conduct systematic evaluation across multiple damping conditions and articulated-object categories to study robustness under contact-load variation, and provide a pure-geometry dexterous interaction resource to support future loco-manipulation and humanoid hand–object interaction research. Across seven GAPartNet objects, DragMesh-2 achieves stronger robustness under contact-load variation than the compared methods while maintaining high task success across damping conditions.

20.
arXiv (CS.CL) 2026-06-17

Would a Large Language Model Pay Extra for a View? Inferring Willingness to Pay from Subjective Choices

As Large Language Models (LLMs) are increasingly deployed in applications such as travel assistance and purchasing support, they are often required to make subjective choices on behalf of users in settings where no objectively correct answer exists. We study LLM decision-making in a travel-assistant context by presenting models with choice dilemmas and analyzing their responses using multinomial logit models to derive implied willingness to pay (WTP) estimates. These WTP values are subsequently compared to human benchmark values from the economics literature. In addition to a baseline setting, we examine how model behavior changes under more realistic conditions, including the provision of information about users' past choices and persona-based prompting. Our results show that while meaningful WTP values can be derived for larger LLMs, they also display systematic deviations at the attribute level. Additionally, they tend to overestimate human WTP overall, particularly when expensive options or business-oriented personas are introduced. Conditioning models on prior preferences for cheaper options yields valuations that are closer to human benchmarks. Overall, our findings highlight both the potential and the limitations of using LLMs for subjective decision support and underscore the importance of careful model selection, prompt design, and user representation when deploying such systems in practice.

21.
arXiv (CS.LG) 2026-06-18

Quantum Annealing Enhanced Reinforcement Learning for Accurate Remaining Useful Lifetime Prediction

arXiv:2606.18503v1 Announce Type: new Abstract: Remaining useful life (RUL) estimation is central to predictive maintenance, where an unplanned failure can cost far more than the asset itself. Statistical degradation models miss the strong nonlinearity of real systems, and data-driven models often converge to suboptimal solutions in high-dimensional, non-convex search spaces. We propose a Quantum Annealing enhanced Q-Learning (QAQL) framework that couples the sampling behaviour of quantum annealing with the sequential decision making of Q-learning. Each Q-value update is encoded as a small quadratic unconstrained binary optimization (QUBO) whose ground state is the greedy action; rather than acting as a deterministic optimizer, the annealer returns a distribution over near-optimal actions across many reads, and this stochastic action selection supplies the exploration that curbs premature convergence on nonlinear degradation trajectories. The QUBO is solved on the D-Wave Advantage system using minor embedding, with the annealer woven into the reinforcement-learning loop rather than bolted on after training. We validate QAQL on two public benchmarks: the NASA C-MAPSS turbofan engine datasets and a device-fleet predictive maintenance dataset. Averaged over many independent runs and across six error metrics, QAQL outperforms the classical and quantum baselines considered in this study, with statistically significant improvements. The results indicate that quantum annealing is a usable, not merely theoretical, optimizer inside a reinforcement-learning loop for industrial predictive-maintenance applications.

22.
arXiv (CS.CV) 2026-06-12

CPAM: Context-Preserving Adaptive Manipulation for Zero-Shot Real Image Editing

Editing natural images using textual descriptions in text-to-image diffusion models remains a significant challenge, particularly in achieving consistent generation and handling complex, non-rigid objects. Existing methods often struggle to preserve textures and identity, require extensive fine-tuning, and exhibit limitations in editing specific spatial regions or objects while retaining background details. This paper proposes Context-Preserving Adaptive Manipulation (CPAM), a novel zero-shot framework for complicated, non-rigid real image editing. Specifically, we propose a preservation adaptation module that adjusts self-attention mechanisms to preserve and independently control the object and background effectively. This ensures that the objects' shapes, textures, and identities are maintained while keeping the background undistorted during the editing process using the mask guidance technique. Additionally, we develop a localized extraction module to mitigate the interference with the non-desired modified regions during conditioning in cross-attention mechanisms. We also introduce various mask-guidance strategies to facilitate diverse image manipulation tasks in a simple manner. CPAM can be seamlessly integrated with multiple diffusion backbones, including SD1.5, SD2.1, and SDXL, demonstrating strong generalization across different model architectures. Extensive experiments on our newly constructed Image Manipulation BenchmArk (IMBA), a robust benchmark dataset specifically designed for real image editing, demonstrate that our proposed method is the preferred choice among human raters, outperforming existing state-of-the-art editing techniques. The source code and data will be publicly released at the project page: https://vdkhoi20.github.io/CPAM

23.
arXiv (CS.CL) 2026-06-12

G-Long: Graph-Enhanced Memory Management for Efficient Long-Term Dialogue Agents

While Large Language Models (LLMs) have advanced open-domain dialogue systems, maintaining long-term consistency remains a challenge due to inherent limitations in long-context reasoning and the inefficiency of processing extensive raw text. Existing approaches typically rely on either unstructured memory storage, which is prone to information loss, or computationally expensive LLMs that incur high latency. To address these limitations, we propose G-Long, a graph-enhanced framework that utilizes a fine-tuned small Language Model (sLM) for structured triplet extraction and associative retrieval, significantly reducing operational costs. Furthermore, we introduce the novel attention-aware importance scoring mechanism that leverages the intrinsic cross-attention signals of a T5 summarizer to identify salient memories. Extensive experiments across diverse benchmarks demonstrate that G-Long achieves state-of-the-art performance in both response generation and memory retrieval, yielding performance gains of up to 9.8% in response quality on MSC and 40.8% in retrieval recall on LME, while significantly minimizing computational overhead.

24.
arXiv (CS.CL) 2026-06-11

Multi-Agent Reasoning with Adaptive Worker Allocation for Stance Detection

Stance detection requires identifying an author's position toward a target, often from short-form texts where stance is implicit, indirect, or rhetorically framed. Although large language models (LLMs) achieve strong performance on this task, single-pass prompting can be brittle when multiple interpretations are plausible. Existing aggregation strategies, such as majority voting or self-consistency, improve robustness by combining labels, but they discard the intermediate reasoning needed to resolve conflicting interpretations. We introduce a multi-agent reasoning framework with adaptive worker allocation for stance detection that shifts aggregation from label-level voting to reasoning-level synthesis. The framework employs a Manager-Worker architecture in which a Manager adaptively allocates a variable number of Worker agents based on input complexity. Each Worker analyzes the input from a distinct perspective and produces a reasoning-only explanation without emitting a stance label; the Manager then synthesizes these explanations to produce the final prediction. We evaluate the proposed framework on SemEval-2016, P-Stance, and COVID-19 Stance using Llama, Mistral, and Gemini. Results show that the framework yields the largest gains on implicit and context-dependent stance cases, achieving 86.07 Macro-F1 on COVID-19 and 82.90 on SemEval-2016, while remaining competitive on more explicit stance datasets such as P-Stance. These findings suggest that adaptive reasoning-level aggregation is most beneficial when stance cannot be reliably inferred from surface cues alone.

25.
arXiv (CS.AI) 2026-06-17

Transformer-Based Warm-Starting for Feasible and Optimal Terminal Approach to Tumbling Objects with Space Manipulators

arXiv:2606.17317v1 Announce Type: cross Abstract: Real-time trajectory generation for on-orbit robotic servicing is challenging due to the nonlinear coupling between spacecraft bus motion, manipulator dynamics, visibility cone, and trajectory-level safety constraints. This paper studies learning-based warm-starting for sequential convex programming (SCP) in the terminal approach of a space manipulator toward a tumbling target. The proposed framework decomposes the problem into a system center-of-mass translational planning stage and a coupled attitude–manipulator torque-allocation stage, and applies a causal transformer warm-start to the latter, which constitutes the dominant computational bottleneck. Linear and flow matching action decoders are compared under different action-chunking and training dataset sizes, and the resulting warm-starts are evaluated under both cost-optimal and feasibility projection using SCP. Across 300 held-out scenarios, the learned warm-start reduces the second-stage SCP iteration count by up to 28% and the runtime by 23% while preserving the final control-cost distribution. When the learned warm-starts are used for nonconvex feasibility projection, they nearly halve the runtime relative to cost-optimal SCP, while avoiding the catastrophic high-cost tail behavior observed when initialized heuristically. These results indicate that sequence-model warm-starts can improve both the computational efficiency and trajectory robustness of optimization-based terminal guidance for space manipulation.