Academic Intelligence · Curated Daily

探索全球前沿学术脉络

AcademicHub 汇聚顶级期刊与预印本平台的实时文献。定制您的专属科研雷达,利用大语言模型自动生成交叉领域文献分析简报。

01.
arXiv (quant-ph) 2026-06-16

Quantum Algorithm for Open-System Battery Cathodes by Modeling Multiple Strongly Coupled Holstein Polarons with Chain-Mapped Caldeira-Leggett Dynamics

arXiv:2606.16017v1 Announce Type: new Abstract: Cathode lithiation occupies a chemical regime of tightly localized orbitals, narrow bandwidths, and strong electron-lattice coupling. The defining electrochemical observables (open-circuit voltage and differential capacity) are open-system, reservoir-equilibration quantities that closed-Hamiltonian quantum simulation cannot produce, set by exchange with electron, Li$^+$, and phonon baths. We present a fault-tolerant quantum algorithm that recovers them through a unitary chain-mapped Caldeira-Leggett embedding, rendering the baths Trotterizable. The resulting fourth-order Trotter step has a T-gate count polynomial in system size, validating its open-system dynamics against hierarchical equations of motion (HEOM) at strong coupling and the Lindblad limit at weak coupling. For single-carrier olivine LiFePO$_4$, a single voltage anchor on an otherwise DFT-fixed Hamiltonian places the differential-capacity peak within the $\pm5$ mV reproducibility of the experimental plateau. For multi-carrier spinel LiMn$_2$O$_4$, whose $1{:}1$ Mn$^{3+}$/Mn$^{4+}$ filling makes the inter-site Coulomb repulsion dynamically active, the same kernel yields a two-plateau voltage curve with a $125$ mV split, within $17\%$ of the observed $150$ mV. We deliver an end-to-end fault-tolerant resource estimate for such a multi-carrier, three-reservoir observable: $368$ logical qubits and $\sim3\times10^5$ T-gates per step, or $\sim1.7\times10^{12}$ T-gates for a full voltage curve (parallelizable over $\sim10^3$ trajectories), leaving the production-scale dynamical run as a milestone for future hardware. The same kernel reproduces macroscopic quantum coherence, two-band superconductivity, and the Mikheyev-Smirnov-Wolfenstein resonance without modification, placing dynamical battery chemistry and similar Hamiltonians within scope for fault-tolerant quantum simulation.

02.
arXiv (CS.CL) 2026-06-16

CoRA: Confidence-Rationale Alignment for Reliable Chain-of-Thought Reasoning

Chain-of-thought (CoT) reasoning can improve LLM performance, but high answer confidence may be misleading when the accompanying CoT rationale is plausible yet incomplete or poorly supported. We study confidence–rationale alignment: whether a model's confidence in its committed answer is justified by its generated rationale. We introduce a GRPO-based reinforcement learning framework that jointly rewards answer correctness, committed-answer probability, and rubric-based rationale support, where the rubric assesses grounding, coherence, task match, and connection to the selected answer without revealing the gold answer to the judge. Across MedQA, MathQA, and OpenBookQA using three open-weight LLMs, our method reduces the confidence–rationale alignment error by up to 26.51% compared with untuned checkpoints, SFT, and correctness-only GRPO, while maintaining competitive accuracy and often improving calibration. These results show that reliable CoT reasoning requires not only confident answers, but rationales that substantively support them.

03.
arXiv (CS.AI) 2026-06-11

AI4Land: Scalable Deep Learning for Global High-Resolution Land Use Reconstruction

arXiv:2606.11793v1 Announce Type: cross Abstract: Uncertainty in the terrestrial carbon cycle remains a major constraint in climate projections, partly driven by the uncertainties affecting the land surface representation and variability in Earth system models. To address this limitation, we present a data-driven framework AI4Land, for generating high-resolution historical reconstructions and future projections of key land surface variables. The framework follows a two-phase approach using a U-Net architecture. In the first phase, which is the focus of this work, it reconstructs annual land use and land cover by integrating coarse-resolution scenario data with static geophysical features. In a planned second phase, the resulting high-resolution maps will be used to predict dynamic biophysical variables, particularly leaf area index, at finer temporal scales. Trained on Earth observation data, the models learn to reproduce spatially explicit and physically consistent land surface patterns, extending temporal coverage to periods lacking direct observations. AI4Land was developed and trained on MareNostrum5, demonstrating how GPU-accelerated HPC infrastructure enables global-scale climate AI pipelines. The final product is a suite of open-source emulators designed for real-time coupling with digital twin platforms, such as those developed under the Destination Earth initiative. By delivering realistic and evolving land surface conditions on demand, this work aims to reduce critical uncertainties and improve the predictive power of next-generation climate simulations.

04.
arXiv (CS.AI) 2026-06-11

Federated continual learning: A comprehensive survey on lifelong and privacy-preserving learning over distributed and non-stationary data

arXiv:2606.11272v1 Announce Type: cross Abstract: Federated Learning (FL) enables collaborative and privacy-preserving model training across distributed clients, but most existing FL systems implicitly assume data stationarity. In real-world settings-such as healthcare, industrial IoT (IIOT), cybersecurity, and smart cities-data streams are inherently non-stationary, leading classical FL methods to suffer from performance degradation, instability, and catastrophic forgetting. Continual Learning (CL) addresses learning under evolving data distributions but has been largely studied in centralized settings, overlooking key constraints of federated systems, including privacy, limited communication, and client heterogeneity. Federated Continual Learning (FCL) emerges at the intersection of FL and CL, aiming to support lifelong, adaptive, and privacy-aware learning over distributed and non-stationary data. This survey provides a comprehensive and systematic overview of FCL. We first present a formal definition of the FCL problem and clarify its distinctive characteristics. We then analyze the limitations of classical FL under non-stationary conditions, highlighting how CL principles support long-term adaptation. To organize the rapidly growing literature, we propose a multi-dimensional taxonomy of FCL approaches. Furthermore, we review representative application domains and data modalities, summarize commonly used evaluation metrics, and discuss experimental perspectives for assessing long-term performance and forgetting. Finally, we highlight key open challenges, including handling extreme heterogeneity under temporal drift, designing scalable and privacy-preserving memory mechanisms, and establishing standardized benchmarks. This survey aims to serve as a reference and a roadmap for advancing FCL toward robust and deployable real-world systems.

05.
arXiv (CS.AI) 2026-06-15

Learning Urban Access Costs from Origin-Destination Flows via Inverse Optimal Transport

arXiv:2606.14157v1 Announce Type: cross Abstract: Cities deliver basic services through mixed public-private facility networks, including schools, clinics, transit providers, and subsidized service points. In these systems, planners often observe where households go, but not the latent cost function through which they trade off factors such as distance, price, and institutional access. We study this urban problem through school choice in the Philippines, where the country's largest national education subsidy is intended to redirect learners from congested public schools to participating private schools. Treating school-to-school enrollment flows as an entropic optimal transport plan, we recover latent choice costs using two complementary inverse optimal transport models: an interpretable distance-banded model with a subsidy term, and a neural cost model trained through a differentiable Sinkhorn forward pass. Applied to 283{,}016 learner trips across 23{,}820 observed flows in the most populated region, the framework estimates a subsidy-equivalent distance, $\lambda^{(k)}$, interpreted as the kilometers of perceived travel cost offset by the subsidy. The case demonstrates how administrative origin-destination data can be transformed into interpretable planning metrics for accessibility-aware subsidy design, facility siting, and urban service allocation.

06.
arXiv (CS.AI) 2026-06-16

Deep Q-Learning on Hölder Spaces

作者:

arXiv:2606.16846v1 Announce Type: cross Abstract: We study the operator-theoretic core of Q-learning in continuous-time stochastic control with continuous states and actions. In value-based reinforcement learning, each Q-learning or DQN update is built from a Bellman optimality target; our analysis isolates this target in a diffusion setting and studies its regularity and approximation complexity. Under uniform ellipticity and Hölder-regular coefficients, we show that a Bellman update maps bounded inputs into an anisotropic regularity class, smoothing the state variable while leaving only Lipschitz dependence on the action variable. This yields a compact family of Bellman iterates and motivates a tensor-product DeepONet architecture adapted to the mixed regularity of the problem. We then derive explicit approximation and resource bounds, together with a stiffness–complexity trade-off as the time step $\delta \to 0$. The resulting theory makes a direct contribution to Q-learning theory at the level of Bellman target regularity and approximation in continuous stochastic control. At the same time, we do not claim a full convergence theorem for practical sampled Q-learning with exploration, replay, and stochastic gradient updates.

07.
arXiv (CS.LG) 2026-06-12

ExPLAIND: Unifying Model, Data, and Training Attribution to Study Model Behavior

arXiv:2505.20076v4 Announce Type: replace Abstract: Post-hoc interpretability methods typically attribute a model's behavior to its components, data, or training trajectory in isolation, and are often tied to a particular level of granularity along the local-to-global spectrum. This leads to explanations that lack a unified view and may miss key interactions. We present ExPLAIND, a theoretically grounded, unified framework that integrates model components, data, and training trajectory while supporting explanations across granularities. We generalize recent work on gradient path kernels, reformulating models trained by AdamW as kernel machines. From the resulting kernel feature maps, we derive novel parameter-wise and step-wise influence scores. We empirically validate the resulting decomposition of model behavior in several settings and apply ExPLAIND to two case studies. Our findings on a Transformer exhibiting Grokking support previously proposed learning phases, while refining the final phase as one in which outer layers align around a representation pipeline learned after memorization. For EuroLLM pretraining, ExPLAIND reveals a two-phase dynamic, with the first characterized by outer-layer MLP learning and the second by increased relative influence of intermediate attention layers. These results establish ExPLAIND as a unified framework for interpreting model behavior and training dynamics.

08.
arXiv (CS.AI) 2026-06-17

Visored: A Controlled-Natural-Language Prover for LLM-Generated Mathematics

arXiv:2606.17581v1 Announce Type: cross Abstract: We present a dependent-type-based prover designed around the way LLMs (and humans) tend to write mathematics, complementing existing systems such as Lean and Rocq. Its core design choices are a surface that imitates mathematical natural language and a rule-driven automation layer that closes the routine steps a textbook would omit, so that an accepted proof can be re-emitted as a checked Lean file. Early experiments suggest that, even without any prover-specific training data, LLMs can learn to use it effectively on the miniF2F benchmark. Lean output excerpts: https://github.com/xiyuzhai-husky-lang/visored/

09.
arXiv (CS.CV) 2026-06-18

Toward Training-Free Zero-Shot Anomaly Detection in 3D Medical Images: A Batch-Based Approach Using 2D Foundation Models

作者:

Zero-shot anomaly detection (ZSAD) is attractive for medical imaging because clinical systems must handle heterogeneous acquisition protocols, changing patient populations, and pathologies for which annotated training data may be unavailable. Most existing zero-shot anomaly detection methods are designed for 2D images, and their direct extension to 3D medical volumes is limited by the scarcity of large-scale volumetric foundation models or by the difficulty of utilizing volumetric context. We propose CS3F, a training-free batch-based framework for ZSAD in 3D medical images using 2D foundation models. Each volume is decomposed along multiple anatomical axes and encoded slice-wise by a 2D vision transformer. These are then converted into localized volumetric tokens by pooling neighboring slice features. Anomaly scores are obtained from cross-subject mutual similarity: tokens that lack close analogues in other subjects are assigned higher anomaly scores. To reduce the attenuation of focal lesion signals caused by depth pooling, we introduce a coarse-to-fine tokenization strategy that enables fine-resolution volumetric scoring without exhaustive matching. CS3F is evaluated on brain MRI across metastases, glioma, and stroke, as well as validated on lung CT to test generalizability beyond atlas-aligned brain MRI. The results show that frozen 2D foundation models can support anomaly localization in 3D medical images, and that the benefit of fine tokenization depends strongly on lesion contrast and imaging modality.

10.
arXiv (CS.AI) 2026-06-12

HybridCodeAuthorship: A Benchmark Dataset for Line-Level Code Authorship Detection

arXiv:2606.12620v1 Announce Type: cross Abstract: Thanks to the rapid adoption of AI code assistants powered by large language models (LLMs), industry codebases are, increasingly, a hybrid of AI- and human-authored code. For risk management and productivity analysis purposes, it is crucial to enable fine-grained location detection of AI-generated code. To develop algorithms for this task, quality benchmarks are needed to assess performance. However, existing benchmarks tend to comprise academic, LeetCode-style problems and presume a code snippet is either completely human-authored or completely AI-authored, which is not reflective of the diverse intents and styles of industry codebases utilizing AI code assistants. To fill these gaps, we introduce HybridCodeAuthorship, a novel benchmark of Python code files with interleaved human- and AI-authored lines of code to simulate authentic utilization of AI code assistants. In this paper, we first present our dataset construction pipeline, which leverages CodeSearchNet, a massive collection of links to open sourced repositories on GitHub. We then benchmark the performance of two state-of-the-art AI-generated code detection algorithms at both the line- and chunk-level. Experimental results demonstrate that HybridCodeAuthorship is a challenging benchmark with a top-scoring algorithm, AIGCode Detector, obtaining a highest F1 score of 0.48 and 0.56 on chunk-level and line-level code detection tasks, respectively.

11.
medRxiv (Medicine) 2026-06-17

Method comparisons for differentiation of Schizophrenia and Bipolar based on rs-fMRI Intrinsic and Functional Networks

Psychosis as a symptom manifests in schizophenia and bipolar disorder, two highly heterogeneous psychiatric illnesses with overlapping clinical manifestations. Resting-state functional Magnetic Resonance Imaging (rsfMRI), represents a promising tool for identifying objective biomarkers of functional brain alterations to aid differential diagnosis. In this work, we comparatively evaluate multiple rs-fMRI representations for differentiating schizophrenia and bipolar disorder using intrinsic connectivity network (ICN) temporal profiles and several functional network connectivity (FNC) approaches, including static, dynamic, and high-order connectivity analyses. The study was conducted on a cohort of 371 subjects with psychosis, while evaluation was performed using a separate held-out cohort of 315 subjects. We investigated convolutional neural network architectures applied to ICN temporal profiles, spectrograms, and scalograms, alongside classical machine learning models trained on connectivity-derived features. Across the evaluated approaches, ICN temporal profiles provided the most consistent discriminative performance, with a 1D convolutional neural network achieving the strongest overall results under the benchmark protocol. Among connectivity-based methods, static functional connectivity generally outperformed dynamic and high-order representations, suggesting that increased representational complexity did not necessarily translate into improved generalization. Although the obtained classification performance remained modest, the results highlight the challenges of robust psychosis differentiation using rs-fMRI while emphasizing the relative stability of low-order connectivity representations and temporal ICN features. These findings contribute to ongoing efforts toward reproducible and interpretable neuroimaging biomarkers for psychiatric disorders.

12.
arXiv (quant-ph) 2026-06-11

Unifying framework for quantum simulation algorithms for time-dependent Hamiltonian dynamics

arXiv:2411.03180v2 Announce Type: replace Abstract: Recently, there has been growing interest in simulating time-dependent Hamiltonians using quantum algorithms, driven by diverse applications, such as quantum adiabatic computing. While techniques for simulating time-independent Hamiltonian dynamics are well-established, time-dependent Hamiltonian dynamics is less explored and it is unclear how to systematically organize existing methods and to find new methods. Sambe-Howland's continuous clock elegantly transforms time-dependent Hamiltonian dynamics into time-independent Hamiltonian dynamics, which means that by taking different discretizations, existing methods for time-independent Hamiltonian dynamics can be exploited for time-dependent dynamics. In this work, we systemically investigate how Sambe-Howland's clock can serve as a unifying framework for simulating time-dependent Hamiltonian dynamics. Firstly, we demonstrate the versatility of this approach by showcasing its compatibility with analog quantum computing and digital quantum computing. Secondly, for digital quantum computers, we illustrate how this framework, combined with time-independent methods (e.g., product formulas, multi-product formulas, qDrift, and LCU-Taylor), can facilitate the development of efficient algorithms for simulating time-dependent dynamics. This framework allows us to (a) resolve the problem of finding minimum-gate time-dependent product formulas; (b) establish a unified picture of both Suzuki's and Huyghebaert and De Raedt's approaches; (c) generalize Huyghebaert and De Raedt's first and second-order formula to arbitrary orders; (d) answer an unsolved question in establishing time-dependent multi-product formulas; (e) and recover continuous qDrift on the same footing as time-independent qDrift. Thirdly, we demonstrate the efficacy of our newly developed higher-order Huyghebaert and De Raedt's algorithm through digital adiabatic simulation.

13.
Science (Express) 2026-06-11

Laser phase plate improves structure determination of small proteins by cryo-EM | Science

作者: 未知作者

Phase plates can in principle overcome the poor image contrast in electron cryo–microscopy (cryo-EM) and the resulting limits on the structural reconstruction of small proteins. However, previous designs have been unstable and compromised the high-resolution signal. They have thus been unable to surpass results achieved by standard cryo-EM. Here, we show that the laser phase plate (LPP), installed in a custom, modern Titan Krios microscope, enhances the resolution in single-particle reconstruction of small proteins by improving specimen-motion correction, recovery of information from the early frames, as well as particle visualization, 3D classification, and alignment. These advances use standard defocus ranges and reconstruction procedures, but open the door to LPP-tailored protocols offering further improvements by leveraging the LPP demonstrated here.

14.
arXiv (CS.AI) 2026-06-19

Finetuning Vision-Language-Action Models Requires Fewer Layers Than You Think

arXiv:2606.20246v1 Announce Type: cross Abstract: Vision-Language-Action (VLA) models pre-trained on massive video-robot datasets have revolutionized robotic manipulation, yet their multi-billion parameter architectures impose prohibitive computational burdens during downstream fine-tuning and real-time inference. In this work, we reveal a highly non-trivial architectural characteristic of these continuous control foundation policies (e.g., pi_0, GR00T-N1.5): despite being trained on diverse physical trajectories, they exhibit severe layer-wise representational redundancy. To exploit this, we introduce a structural compression pipeline that is entirely training-free, bypassing the need of existing methods to load full-scale models to learn optimized token reductions or dynamic layer selectors. Instead, using only a single forward pass via Centered Kernel Alignment to identify redundant layer features, we remove twin layers to permanently compress the model depth by up to 50% across both the VLM backbone and the continuous control policy head. Downstream fine-tuning of this streamlined architecture yields a dual acceleration benefit: a 40-50% reduction in training time and up to 30% faster real-time inference, while matching or exceeding full-scale base model performance. We comprehensively validate our method across three simulation benchmarks (LIBERO, RoboCasa, SimplerEnv) and 10 diverse real-world manipulation tasks across 4 unique robotic embodiments. These results prove that advanced VLAs require significantly fewer layers than previously assumed, offering a highly compute-efficient paradigm for scalable robot learning.

15.
arXiv (CS.CL) 2026-06-18

EARS: Explanatory Abstention for Reliable Sub-Agent Modeling in Large-scale Multi-Agent Systems

In large-scale enterprise settings, centralized multi-agent systems (MAS) are increasingly adopted, in which a coordinator delegates user requests to lightweight, domain-specialized sub-agents. While this architecture improves modularity, scalability, and cost efficiency, its reliability depends not only on accurate routing but also on sub-agents' ability to calibrate their responses to capability constraints. In particular, sub-agents built on smaller fine-tuned models often struggle with such calibration, leading them to over-answer ambiguous, underspecified, misrouted, or unsupported requests and produce hallucinated outputs instead of actionable feedback. To address this challenge, we present EARS (Explanatory Abstention for Reliable Sub-Agent Modeling), a production-oriented framework that reframes sub-agent abstention as an inter-agent communication protocol: a sub-agent does not merely abstain, but exposes an actionable failure state to the coordinator. EARS curates human-agent interaction data using an ensemble of calibrated LLM-as-a-Judge models, producing structured abstention labels and rationales under a taxonomy of sub-agent failure modes. These data are used to fine-tune sub-agents to detect failure conditions and return rationales for coordinator-level clarification, rerouting, or fallback. We evaluate EARS in a large-scale production e-commerce assistant supporting enterprise business intelligence workflows. EARS improves the overall response pass rate from 68.5% to 78.9%, demonstrating that sub-agent-side explanatory abstention improves MAS reliability.

16.
arXiv (CS.CL) 2026-06-16

MyPCBench: A Benchmark for Personally Intelligent Computer-Use Agents

Current benchmarks for computer-use agents evaluate models in impersonal environments. This leaves a gap between evaluation and deployment where personal assistants are expected to work across a user's whole digital life, including their context, historical data, and logged-in accounts. This gap is widest on web tasks, where live web evaluations cannot exercise sites that require logging in or personal information, the kind of site a real personal assistant has to drive. We introduce MyPCBench, which tests computer-use agents as personal assistants on a Linux desktop populated with 17 simulated real-world web applications and a full desktop stack, all seeded for one canonical persona, Michael Scott from The Office. We define 184 tasks in this environment, each inspired by a real request drawn from the OpenClaw community, and benchmark six closed and open-weight models with a uniform computer+bash tool surface. We find that the best model, Claude Opus 4.6, fully solves 55.4\% of the tasks, the only model above 50\%. Model failures cluster on tasks that span many applications and on long trajectories, where personalization stresses an assistant the most. We release the environment, task set, and agent harness at https://mypcbench.com.

17.
medRxiv (Medicine) 2026-06-18

Automated Airways Characterization and Assessment of Cystic Fibrosis from CT Imaging

Background Advancements in medical imaging have enabled non-invasive diagnosis and staging of cystic fibrosis (CF) using CT scans, revealing dilated airways, an increased number of visible airways, and airway generation splits in these patients. However, manual characterization of airways remains time-consuming and challenging due to the numerous structural changes, thereby limiting clinical feasibility. This study aims to develop an automated algorithm to characterize airways from segmented lung CT scans and apply this to a retrospective population. This approach reduces the time required to analyze images and obtain disease-staging results. Methods This framework consists of two stages. The first stage extracts and skeletonizes the airway tree from lung CTs, while the second stage measures lung features, including airway volumes, branch counts, generation splits, diameters, and cross-sectional areas. This permits comprehensive characterization for use in clinical assessment. Results The airways analysis was performed on 169 CT volumes ranging in age from 6 to 18 years of age, revealing substantial differences in detected airway branches, generation splits, and normalized airway volume between the control and CF groups. The framework also measures airway diameters and cross-sectional areas, revealing an increase in the number of small airways in cystic fibrosis patients, due to early bronchiectasis. These findings align with previous research and demonstrate the framework's ability to accurately quantify airway changes in patients with CF. Discussion The framework extracts entire airway trees, facilitating measurements of volume, branch count, diameters, and cross-sectional areas, which change with CF severity and/or treatment. However, partial lung atelectasis can limit the accuracy of airway detection in moderate-to-severe cases. Funding NIA U54 AG054345 and NIA R21 AG07857501

18.
arXiv (CS.AI) 2026-06-15

VHDLSuite: Unified Pipeline for LLM VHDL Generation with Data Synthesis and Evaluation

arXiv:2606.13735v1 Announce Type: cross Abstract: Large Language Models (LLM) have shown impressive capabilities in Register Transfer Level (RTL) code generation, particularly for Verilog. However, evaluating their performance with other Hardware Description Languages (HDL), especially VHDL, remains limited although its distinct language characteristics, such as stricter semantic rules, introduce evaluation considerations that differ from Verilog. This lack of coverage restricts fully understanding of how well current models generalize across hardware design languages with differing structures and semantics. To address this gap, we introduce VHDLSuite, a benchmark-centered infrastructure for scalable VHDL generation evaluation, integrating automated benchmark synthesis, executable validation, and multi-model diagnostic analysis. First, we propose a data pipeline that automatically converts Verilog designs and their accompanying testbenches into executable VHDL benchmark instances, followed by VUnit/GHDL-based validation to ensure each released task is compilable, runnable, and consistently checkable in the VHDL environment. Second, we introduce VHDLBench, a benchmark with over 200 VHDL problems with complete and validated testbenches across a wide range of complexity levels. Third, we extensively evaluate cutting-edge LLMs and uncover key challenges specific on LLM-aided VHDL generation. Our findings provide important insights and support future work in multi-language hardware design automation.Our data pipeline, benchmark, and evaluation framework will be open-sourced.

19.
arXiv (CS.LG) 2026-06-19

Learning to Emulate Chaos: Adversarial Optimal Transport Regularization

arXiv:2604.21097v2 Announce Type: replace-cross Abstract: Chaos arises in many complex dynamical systems, from weather to power grids, but is difficult to accurately model with data-driven methods such as machine learning emulators. While emulators are promising tools for accelerating simulations and solving inverse problems, they still struggle to learn chaotic dynamics, where sensitivity to initial conditions renders exact long-term forecasts infeasible, especially given noisy data. Recent work instead trains emulators to match the statistical properties of chaotic attractors, but these approaches often rely on handcrafted summary statistics or large, diverse multi-environment datasets. In this work, we propose a family of adversarial optimal transport objectives that can jointly learn high-quality summary statistics and a physically consistent emulator from a single noisy trajectory. We theoretically analyze and experimentally validate a Sinkhorn divergence formulation (2-Wasserstein) and a WGAN-style dual formulation (1-Wasserstein) of our approach. Numerical experiments across a variety of chaotic systems, including ones with high-dimensional spatiotemporal chaos, show that emulators trained using our proposed objectives have significantly improved long-term statistical fidelity.

20.
arXiv (CS.CV) 2026-06-11

Contactless 3D Human Body Measurement Using Depth Cameras for Smart Health Monitoring

Contactless body measurement technologies are becoming increasingly significant for smart health monitoring, digital health applications, and remote patient assessment. Traditional anthropometric measurements typically necessitate physical contact and trained personnel, which may constrain scalability in remote healthcare settings. In this study, we introduce a depth camera-based framework for estimating human body measurements utilizing 3D point cloud data. An Orbbec Astra 2 depth camera was employed to capture RGB images, depth maps, and 3D point clouds of participants. The captured point cloud was processed using Python-based tools, including Open3D, NumPy, and OpenCV, to segment the human body from the background. Key anthropometric measurements, such as height and arm span, were computed. The measurements were obtained through a combination of spatial filtering and landmark selection on the 3D point cloud, followed by the projection of the computed measurements onto the corresponding RGB image using camera intrinsic parameters. In addition to linear measurements, the approximate body volume and visible surface area were estimated using voxel-based occupancy analysis and mesh-based surface reconstruction methods. The experimental results from a single depth capture demonstrated that accurate body measurements and geometric estimates could be obtained from depth camera data without physical contact. This study provides a foundation for future real-time systems that integrate depth sensing with intelligent health monitoring and generative AI models for smart healthcare applications.

21.
arXiv (math.PR) 2026-06-17

A note on the $\mathcal{W}_2$-convergence rate of the empirical measure of an ergodic $\mathbb{R}^d$-valued diffusion

arXiv:2502.07704v2 Announce Type: replace Abstract: In this note, we consider a Stochastic Differential Equation under a strong confluence and Lipschitz continuity assumption of the coefficients. For the unique stationary solution, we study the rate of convergence of its empirical measure toward the invariant probability measure. We provide rate for the Wasserstein distance in the mean quadratic and almost sure sense.

22.
arXiv (quant-ph) 2026-06-15

Scaling native entanglement generation in layered semiconductors with quasi-phase matching

arXiv:2606.14553v1 Announce Type: new Abstract: Efficient generation of entangled photons typically relies on spontaneous parametric down-conversion (SPDC) in phase-matched macroscopic nonlinear media. However, generating entanglement under phase-matching constraints requires additional bulk optics or interferometers. In contrast, ultrathin van der Waals semiconductors - such as transition metal dichalcogenides (TMDs) - exhibit strong enough optical nonlinearities for SPDC to be observed from subwavelength-thick media, thereby bypassing conventional phase-matching constraints. In this microscopic domain, the intrinsic crystal symmetry governs the nonlinear optical response, enabling the native generation of polarization-entangled photon pairs. However, generating these states efficiently has been fundamentally restricted by the material's coherence length ($L_c$), which limits the attainable conversion efficiency. Here, we investigate periodically-poled TMDs (PPTMDs) designed to scale up this interaction via quasi-phase matching. We demonstrate that mechanically flipping the sign of the nonlinearity at precise intervals of $L_c$ introduces quasi-phase matching, that scales the pair-production rate while preserving the pristine, symmetry-generated polarization entanglement, with fidelities exceeding 99%. Backed by a rigorous theoretical model, our work clarifies the interplay between crystal symmetry and propagation effects in thin nonlinear media, providing a new avenue for engineering quantum light in nanophotonic systems.

23.
arXiv (CS.CL) 2026-06-11

Toward Preference-aligned Large Language Models via Residual-based Model Steering

Preference alignment is a critical step in making Large Language Models (LLMs) useful and aligned with (human) preferences. Existing approaches such as Reinforcement Learning from Human Feedback or Direct Preference Optimization typically require curated data and expensive optimization over billions of parameters, and eventually lead to persistent task-specific models. In this work, we introduce Preference alignment of Large Language Models via Residual Steering (PaLRS), a training-free method that exploits preference signals encoded in the residual streams of LLMs. From as few as one hundred preference pairs, PaLRS extracts lightweight, plug-and-play steering vectors that can be applied at inference time to push models toward preferred behaviors. We evaluate PaLRS on various small-to-medium-scale open-source LLMs, showing that PaLRS-aligned models achieve consistent gains on mathematical reasoning and code generation benchmarks while preserving baseline general-purpose performance. Moreover, when compared to models aligned with DPO and SimPO, they perform better with great time-savings. Our findings highlight that PaLRS offers an effective, much more efficient and flexible alternative to standard preference optimization pipelines, offering a training-free, plug-and-play mechanism for alignment with minimal data.

24.
arXiv (CS.AI) 2026-06-12

Modern analog computing for solving differential and matrix equations

arXiv:2606.13179v1 Announce Type: cross Abstract: In recent years, driven by the computational demands of data-intensive applications such as artificial intelligence and scientific computing, analog computing has gained renewed interest. Given the diversity of computational tasks and recent advancements in analog CMOS circuits and resistive memory technologies, we refer to the evolving landscape as modern analog computing. In this context, we identify three core computational primitives: solving differential equations, solving matrix equations, and performing matrix-vector multiplications, and we explore the connections among them. We also examine various hardware implementations of these analog computing operators, including those built with discrete components, integrated circuits, and resistive memory devices. Among these, resistive memory arrays emerge as particularly promising due to their implementation efficiency. The paper then surveys recent progress in leveraging modern analog computing to solve differential and matrix equations using both advanced analog CMOS circuits and resistive memory arrays. Finally, we discuss the applications of these circuits, the precision and scalability issues and their potential solutions, the relationship with in-memory computing, and the unique computational complexity of analog computing. This paper provides a unified perspective on analog computing, highlighting its strengths, current developments, and challenges, and positioning it as a pivotal enabler of next-generation computational frontiers.

25.
arXiv (CS.CL) 2026-06-11

Benchmarking Large Language Models for Safety Data Extraction

Accurate extraction of structured information from Safety Data Sheets (SDS) remains challenging in industrial safety due to heterogeneous document formats and the limitations of traditional rule-based methods. This study benchmarks state-of-the-art Large Language Models (LLMs) for automated SDS data extraction, comparing text-based and multimodal processing pipelines. We systematically evaluate four models: Gemini 1.5 Pro, GPT-4o, Claude 3.7 Sonnet, and Llama 3.1-70B, across three prompting strategies: zero-shot, few-shot, and chain-of-thought. The evaluation framework assessed accuracy, latency, and cost across more than 50,000 extracted data fields. Results show that text-based extraction consistently outperforms multimodal processing across all metrics. Gemini 1.5 Pro combined with a Chain-of-Thought prompt achieved the highest accuracy (84%), outperforming GPT-4o (81%) and Claude 3.7 Sonnet (79%). However, no model surpassed the 90% accuracy threshold commonly required for reliable real-world deployment. These findings indicate that general-purpose LLMs are not yet robust enough for unsupervised industrial use, though performance suggests strong potential with task-specific fine-tuning. Future research should focus on domain-adapted training, model calibration, and the integration of Human-in-the-Loop verification to ensure safety-critical reliability.