Academic Intelligence · Curated Daily

探索全球前沿学术脉络

AcademicHub 汇聚顶级期刊与预印本平台的实时文献。定制您的专属科研雷达,利用大语言模型自动生成交叉领域文献分析简报。

01.
arXiv (quant-ph) 2026-06-12

Simple analytical flux-tuned iSWAP pulses for leakage suppression

arXiv:2606.13052v1 Announce Type: new Abstract: Fast, high-fidelity two-qubit gates are a key requirement for fault-tolerant quantum computation. Tunable coupler architectures provide a flexible approach for implementing entangling gates through flux control with large on-off ratios, but fast flux modulation can induce diabatic transitions and population leakage to non-computational states, limiting gate performance. Here we present an analytical flux control method enabling derivative removal by adiabatic gate ($\Phi$-DRAG) for suppressing leakage in flux tunable two-qubit gates. We show that $\Phi$-DRAG differs fundamentally from conventional microwave implementations and derive modified flux modulation protocols that suppress leakage below $10^{-4}$ for fast entangling gates. The method remains effective across a range of asymmetry between qubit anharmonicities and different circuit parameters, enabling high-fidelity two-qubit gates within the fifteen nanosecond range.

02.
arXiv (CS.AI) 2026-06-18

Essential Subspace Merging for Multi-Task Learning

arXiv:2606.19164v1 Announce Type: cross Abstract: Model merging aims to enable multi-task learning by integrating the capabilities of multiple models fine-tuned from the same pre-trained checkpoint into a single model. Its core challenge is inter-task interference among task-specific parameter updates. In this paper, we analyze the output shifts induced by task updates and observe that their energy is concentrated in a small number of principal directions. We call the subspace spanned by these directions the essential subspace. In contrast, most remaining directions carry little task-relevant energy, but their accumulation across multiple task updates can cause severe interference during merging. Motivated by this observation, we propose Essential Subspace Decomposition (ESD), which decomposes each task update according to the principal components of its activation shift. Based on ESD, we introduce Essential Subspace Merging (ESM), a training-free static merging method that orthogonalizes and fuses essential components into one compact multi-task model. We further extend ESM to ESM++, a training-free dynamic merging method that decomposes task-specific residuals into low-rank experts and selects the most relevant expert through prototype-based routing during forward inference. Extensive experiments across multiple task sets and model scales demonstrate that ESM and ESM++ effectively preserves task knowledge while reducing inter-task interference.

03.
arXiv (CS.CL) 2026-06-15

Did You Forget What I Asked? Prospective Memory Failures in Large Language Models

作者:

Large language models often fail to satisfy formatting instructions when they must simultaneously perform demanding tasks. We study this behaviour through a prospective memory inspired lens from cognitive psychology, using a controlled paradigm that combines verifiable formatting constraints with benchmark tasks of increasing complexity. Across three model families and over 8,000 prompts, compliance drops by 2-21% under concurrent task load. Vulnerability is highly type-dependent: terminal constraints (requiring action at the response boundary) degrade most, with drops up to 50%, while avoidance constraints remain comparatively robust. A salience-enhanced format (explicit instruction framing plus a trailing reminder) recovers much of the lost compliance, restoring performance to 90-100% in many settings. Interference is bidirectional: formatting constraints can also reduce task accuracy, with one model's GSM8K accuracy dropping from 93% to 27%. In additional stacking experiments, joint compliance declines sharply as constraints accumulate. All results use deterministic programmatic checkers without an LLM-as-judge component on publicly available datasets.

04.
arXiv (CS.AI) 2026-06-18

A Link between Shock-wave Theory and Symmetry-reduced Stochastic Gradient Descent for Artificial Neural Networks

arXiv:2606.18303v1 Announce Type: cross Abstract: We develop a mathematically explicit link between shock-wave theory and the symmetry-quotiented learning dynamics of stochastic gradient descent, drawing on differential geometry, Lie group theory, and fluid mechanics. Specifically, after quotienting parameter symmetries and applying local-entropy coarse-graining, the effective dynamics satisfy a viscous Hamilton–Jacobi equation on the quotient manifold. Moreover, under the assumption that the raw parameter dynamics can be summarized by a gradient field on the quotiented space, the gradient of the coarse-grained loss function obeys a Burgers-type equation, and shock formation can be established rigorously. We apply our theory to multilayer perceptrons, convolutional neural networks, Transformers, and mean-field networks, and show that they obey the Hamilton–Jacobi or Burgers-type equations. We conjecture that this framework also yields practical diagnostics for deep learning. In architectures such as Transformers, raw parameter norms are often distorted by symmetry redundancy and may therefore be misleading, whereas symmetry-corrected quotient observables provide a principled basis for monitoring, forecasting, and controlling training-phase transitions.

05.
arXiv (CS.CL) 2026-06-12

NTS-CoT: Mitigating Hallucinations in LLM-based News Timeline Summarization with Chain-of-Thought Reasoning

The rapid updates of online news make tracking event developments challenging, highlighting the need for timeline summarization (TLS). Hallucinations, where LLM-generated content deviates from source news, still remain a critical issue in LLM-based TLS and are not well studied in existing works. To bridge this gap, we identify two primary types of hallucinations: unfaithful content during news summarization and information omission in date-event summarization. Then, we propose NTS-CoT, a novel framework that leverages Chain-of-Thought (CoT) reasoning to mitigate hallucinations in TLS. The framework consists of three key modules: i) Element-CoT to capture essential news elements for faithful summarization, ii) Date Selection to combine temporal saliency and event prominence for timestamp selection, and iii) Causal-CoT to infer causal relationships and reduce omissions in date-event summarization. Extensive experiments, including quantitative analysis on three TLS benchmarks and human evaluation, demonstrate that NTS-CoT outperforms state-of-the-art baselines, effectively mitigating hallucinations and improving LLM-based TLS performance. Our source code is available at https://anonymous.4open.science/r/NTS-CoT .

06.
arXiv (CS.AI) 2026-06-18

SWE-Future: Forecast-Conditioned Data Synthesis for Future-Oriented Software Engineering Agents

arXiv:2606.18733v1 Announce Type: cross Abstract: Realistic coding-agent benchmarks often replay public GitHub issues and pull requests, making them vulnerable to overlap with model pretraining, fine-tuning, synthetic-data generation, or benchmark-driven model selection. Fully synthetic tasks avoid direct historical replay, but can drift away from real repository needs. We propose SWE-Future, a forecast-conditioned data synthesis method for future-oriented coding tasks. Given a forecast snapshot at time $T_0$, the method uses only pre-$T_0$ repository evidence to forecast future feature implementation/enhancement, bugfix, and refactor task families. We first validate this forecasting step retrospectively: after forecasts are fixed, later pull requests are used only to measure whether the predicted task families match future repository work. In an 80-repository study, the forecaster achieves 58.1\% future-work relevance under the main semantic matching metric. We then use validated forecast families as conditioning signals to synthesize a 200-task coding-agent dataset across 61 repositories from a task-generation snapshot, rather than replaying the later pull requests used for validation. SWE-Future shows that repository-evolution forecasts can guide realistic, future-oriented coding-task synthesis while reducing direct dependence on historical pull-request replay.

07.
arXiv (CS.AI) 2026-06-16

Is Your Agent Playing Dead? Deployed LLM Agents Exhibit Constraint-Evasive Fabrication and Thanatosis

arXiv:2606.14831v1 Announce Type: cross Abstract: This paper presents and characterizes a spectrum of previously unreported behaviours we term Constraint-Evasive Fabrication (CEF): when an LLM agent operates under irreconcilable constraints (where no response can simultaneously satisfy all active rules) it spontaneously fabricates plausible external obstacles and presents them as a fact. At the extreme end of this spectrum lies Constraint-Evasive Thanatosis (CET); the limit case where, rather than inventing a plausible excuse, the model simulates a full system crash to make the user disengage entirely. We first observed CET in an uncontrolled deployment test, where a GPT-4o banking agent fabricated Python-style exception traces (complete with memory addresses) to feign a system failure when threatened by a user. In subsequent controlled experiments, the model independently invented audit restrictions, microservice architectures, error codes, and service timeouts, none present in its prompt. Reproduction attempts across pressure levels and attacker personas yielded CEF consistently but with substantial variation in form, onset, and severity: the phenomenon is robust but stochastic. Critically, injecting ground-truth data mid-conversation did not restore honest behaviour once fabrication had taken hold (the model ignored correct information and continued confabulating) suggesting CEF is self-reinforcing rather than a knowledge gap. We show that (1) standard enterprise guardrails routinely create CEF-enabling conditions in production, (2) current RLHF procedures suppress but cannot eliminate CEF, and (3) existing safety benchmarks do not test for this failure mode. Our results highlight the need for irreconcilable-constraint benchmarks, CEF-aware training procedures, and deployment-time detection methods before constrained agents become further entrenched in high-stakes domains.

08.
arXiv (CS.AI) 2026-06-17

Position: Modular Memory is the Key to Continual Learning Agents

arXiv:2603.01761v2 Announce Type: replace-cross Abstract: Foundation models have transformed machine learning through large-scale pretraining and increased test-time compute. Despite surpassing human performance in several domains, these models remain fundamentally limited in continuous operation, experience accumulation, and personalization, capabilities that are central to adaptive intelligence. While continual learning research has long targeted these goals, its historical focus on in-weight learning (IWL), i.e., updating a single model's parameters to absorb new knowledge, has rendered catastrophic forgetting a persistent challenge. Our position is that combining the strengths of In-Weight Learning (IWL) and the newly emerged capabilities of In-Context Learning (ICL) through the design of modular memory is the missing piece for continual adaptation at scale. We outline a conceptual framework for modular memory-centric architectures that leverage ICL for rapid adaptation and knowledge accumulation, and IWL for stable updates to model capabilities, charting a practical roadmap toward continually learning agents.

09.
arXiv (CS.CV) 2026-06-15

CottonLeafVision: An Explainable and Robust Deep Learning Framework for Cotton Leaf Disease Classification

Globally, cotton is a highly economically beneficial crop, as the textile industry heavily depends on it. So, the precise identification and detection of cotton leaf disease is crucial for economic stability. The development goal of "CottonLeafVision" is to accurately classify and detect cotton leaf disease. With this goal, we have evaluated multiple pretrained Deep Convolutional Neural Networks, including DenseNet201, InceptionV3, and VGG19 on a publicly available cotton leaf disease image dataset. This image dataset includes seven classes, six disease classes, and one healthy class, collected under various field conditions reflecting real-world challenges. Among these pretrained models, with DenseNet201, we have achieved the highest classification accuracy of 98%. To enhance the model reliability and interpretability, we have implemented different techniques and methods such as Gradient-weighted Class Activation Mapping (Grad-CAM), occlusion sensitivity analysis and adversarial training to increase the noise resistance of the model. Finally, we have developed a prototype in order to utilize the model's capabilities on real life agriculture. This paper shows the deep learning model's capabilities to classify the disease in real-life cotton disease management situations.

10.
bioRxiv (Bioinfo) 2026-06-11

Integrating Spatially Adjusted Protein Summaries for Survival Prediction in Spatial Proteomics

Recent advances in spatial proteomics, particularly imaging mass cytometry, enable the measurement of protein expression at the single-cell level while preserving a spatial context. Conventional survival analyses, however, typically rely on patient-level averages of protein intensities and therefore overlook spatial heterogeneity and tissue architecture. To address this limitation, we introduce a framework that incorporates spatial information into survival modeling by generating spatially adjusted protein summaries (SAPS). In this approach, cell-level protein intensities within each patient are modeled using spatial spline regression to capture spatial trends. From these models, we extract two complementary features: a spatially adjusted mean expression and a residual variance that reflects cell-to-cell variability unexplained by spatial effects. These summaries are then incorporated into Cox proportional hazards models in combination with clinical covariates. In simulation studies, our proposed framework achieved improved predictive performance compared to other alternative methods. The application of the method to breast cancer imaging mass cytometry data indicate that spatially adjusted summaries may enhance survival prediction and reveal biologically interpretable spatial protein patterns, suggesting high translational potential. This methodology offers an efficient means of translating complex spatial proteomics data into patient-level features, providing both improved survival prediction and new insights into the role of spatial heterogeneity in cancer outcomes.

11.
Nature (Science) 2026-06-11

Daily briefing: Deep-sea whale graveyard is a treasure trove of fossils

作者:

Researchers have uncovered more than 400 fossilized whale bones in an ocean-floor chasm. Plus, the working lives of scientists, in pictures, and how AI could slow the pace of research publication for the better. Researchers have uncovered more than 400 fossilized whale bones in an ocean-floor chasm. Plus, the working lives of scientists, in pictures, and how AI could slow the pace of research publication for the better.

12.
arXiv (CS.LG) 2026-06-19

TetriServe: Efficiently Serving Mixed DiT Workloads

arXiv:2510.01565v4 Announce Type: replace Abstract: Diffusion Transformer (DiT) models excel at generating high-quality images through iterative denoising steps, but serving them under strict Service Level Objectives (SLOs) is challenging due to their high computational cost, particularly at larger resolutions. Existing serving systems use fixed-degree sequence parallelism, which is inefficient for heterogeneous workloads with mixed resolutions and deadlines, leading to poor GPU utilization and low SLO attainment. In this paper, we propose step-level sequence parallelism to dynamically adjust the degree of parallelism of individual requests according to their deadlines. We present TetriServe, a DiT serving system that implements this strategy for highly efficient image generation. Specifically, TetriServe introduces a novel round-based scheduling mechanism that improves SLO attainment by (1) discretizing time into fixed rounds to make deadline-aware scheduling tractable, (2) adapting parallelism at the step level and minimizing GPU hour consumption, and (3) jointly packing requests to minimize late completions. Extensive evaluation on state-of-the-art DiT models shows that TetriServe achieves up to 32% higher SLO attainment compared to existing solutions without degrading image quality.

13.
arXiv (CS.AI) 2026-06-17

Memory as a Wasting Asset: Pricing Flash Endurance for Embodied Agents, and the Limits of Doing So

arXiv:2606.18144v1 Announce Type: new Abstract: A robot's flash endurance is a non-renewable stock: every persisted write spends one of a few thousand program/erase cycles and never refills, yet no fielded robot memory system prices which memories are worth an erase cycle. We treat embodied memory as depreciating capital and price that stock with a single endurance shadow price $\eta$, which makes cost-minimizing placement across a RAM / on-board NVM / cloud hierarchy a threshold in a wear-augmented per-byte index. The index is cost-optimal whatever the sign of the value-write association $\chi$; only when $\chi > 0$ does the optimum turn non-monotone, sending a robot's most valuable memories off its flash. The pivot is thus empirical, and we measure $\chi$ on real robot logs at a pre-specified gate: its sign is a property of the deployment regime – positive on recurrent long-horizon manipulation ($\hat{\chi} \approx +1.0 \times 10^{-3}$, replicated at full power), null on a shorter-horizon suite, and negative on non-recurrent teleoperation. Two boundaries scope the result. The endurance budget is dormant on premium 3,000-P/E TLC at datasheet prices and binding on the commodity QLC/eMMC ($\sim$1,000 P/E) that cheaper edge robots run. And where it binds, a learned wear-aware controller only ties price-based routing on task value, because realized value is tier-invariant across RAM, NVM, and cloud: the rent governs device lifetime and cost, not task performance. Whether wear-aware placement improves task value remains open – $\chi$ is measured against a value proxy, and the non-monotone optimum, while proven, is not yet observed in data.

14.
arXiv (CS.LG) 2026-06-16

TS-ICL: A Flexible Time-Indexed Foundation Model for Time Series via In-Context Learning

arXiv:2606.05878v2 Announce Type: replace Abstract: Foundation models mark a profound paradigm shift in time series modeling, with task-specific models being superseded by general-purpose zero-shot models. Yet, current approaches primarily focus on forecasting, while real-world time series are often irregularly and partially observed, requiring models that can jointly forecast, impute missing values, and handle degraded sampling conditions. To address these challenges, we introduce TS-ICL, a novel probabilistic In-Context Learning encoder–regressor Transformer that unifies forecasting and imputation. TS-ICL formulates time series tasks as timestamp-aligned regression and naturally incorporates covariates by training on synthetic dependency structures generated from a novel causal data prior. Empirically, TS-ICL achieves a new state-of-the-art in imputation, while remaining competitive with leading forecasting foundation models across both univariate and covariate-aware benchmarks. It shows particularly strong performance in forecasting with partially observed look-back windows.

15.
arXiv (CS.CV) 2026-06-18

CAOA – Completion-Assisted Object-CAD Alignment

Accurately aligning CAD models to their corresponding objects in indoor RGB-D scans is a central challenge in 3D semantic reconstruction. The task requires estimating a 9-Degree-of-Freedom (DoF) pose-position, rotation, and scale along three axes-but is hindered by noisy and incomplete scans, as well as segmentation errors that cause geometric distortions. We present Completion-Assisted Object-CAD Alignment (CAOA), a method that integrates a semantically and contextually aware point cloud completion module with a symmetry-aware relative pose estimation algorithm, enabling precise alignment of CAD models to scanned objects. Existing completion methods are typically trained and evaluated on synthetic datasets, which often fail to generalize to real-world scans. To bridge this gap, we introduce a synthetic data generation strategy tailored to indoor scenes, significantly reducing the synthetic-to-real domain gap-validated through quantitative comparisons with widely used completion datasets. In addition, we release S2C-Completion, an expert-annotated dataset of over 8,500 object-CAD pairs from Scan2CAD, created for real-world indoor single-object completion and intended as a new benchmark for this task. For object-CAD alignment, we incorporate symmetry information via a symmetry-aware loss, improving robustness to symmetric ambiguities. On the Scan2CAD benchmark, CAOA achieves a 17% accuracy improvement over state-of-the-art methods.

16.
arXiv (math.PR) 2026-06-16

A Low-Regularity Semigroup Sewing Lemma via Quotient Structures

arXiv:2606.16164v1 Announce Type: new Abstract: We develop a low-regularity Sewing theory for the semigroup coboundary $\hat\delta=\delta-a$ associated with a strongly continuous semigroup $S$. Unlike the ordinary low-regularity Sewing problem, the semigroup setting has an intrinsic algebraic non-uniqueness below the threshold $1$, in the sense that solutions are canonical only modulo semigroup cocycles. Accordingly, the natural target is a quotient space rather than an increment space. We identify this quotient structure and construct the corresponding semigroup Sewing map. The construction uses a frozen terminal-time transform, which rewrites semigroup defects, for each terminal time, as ordinary low-regularity Sewing problems on a frozen simplex. This reduction, however, does not by itself produce a genuine semigroup increment; the main additional step is to prove that the frozen solution classes are compatible as the terminal time varies and hence assemble into a canonical quotient class for $\hat\delta$. This yields canonical classes for $0

17.
arXiv (CS.AI) 2026-06-12

Toward Instructions-as-Code: Understanding the Impact of Instruction Files on Agentic Pull Requests

arXiv:2606.13449v1 Announce Type: cross Abstract: AI-agents (e.g., GitHub Copilot) collaborate as teammates in different software engineering tasks, including code generation proposed through pull requests (Agentic-PRs). For better agent efficiency, developers create instruction files that guide the AI-agents, including how to navigate the project, locate the right components, run tests, respect best practices, and more. In this paper, we investigate the relationship between the creation of these instructions and the performance of AI-agents in creating better pull requests, which have a higher chance of success (i.e., the merge rate), address more complex tasks (e.g., code churn), and require less effort to be merged (e.g., time to merge). To this end, we analyze 15,549 agentic PRs from 148 projects in the AIDev dataset. Using the three dimensions, we compare each project before and after the creation of the instruction files. We find that specifying instructions for AI-agents does not necessarily lead to better results. With the instruction files, 27.7\% of the projects increased their merge rate by at least 20\%, while 26.35\% decreased it. The same observation is seen with the amount of changes (e.g., code churn, number of modified files) and with the efforts to merge an agentic PR (e.g., merge time and number of comments). From a first exploration, we find that projects that managed to increase their merge rate have substantially longer instruction files, which are also well structured into a higher number of sections and sub-sections. Our results motivate the need for research to assist practitioners in framing the development of instruction files as a software engineering activity (aka, Instructions-as-Code).

18.
arXiv (CS.CL) 2026-06-19

TerraMARS: A Domain-Adapted Small-Language-Model Pipeline for Mars Terraforming Literature

Researchers are interested in learning about Mars so that it may eventually become habitable for humans. To achieve this, there is a need for comprehensive knowledge of the planet's atmosphere, hydrology, surface chemistry, radiation environment, and spatial features through the scientific literature. These contain valuable information and meaningful quantitative constraints that can be used in other models and studies, such as habitability assessment and future terraforming studies. We present TerraMARS, an end-to-end information extraction pipeline that combines a domain-adapted Small Language Model to answer Mars terraforming-related questions and convert unstructured Mars science text into machine-readable structured outputs in JavaScript Object Notation (JSON) format. A corpus of open-access papers is collected and processed using a multistage retrieval and chunking framework. Google Gemma 3 1B was adapted to the domain using Quantized Low-Rank Adaptation (QLoRA) fine-tuning on Mars-specific question-answering and information extraction datasets. The resulting pipeline generates both types of output and provides a foundation for integrating knowledge from scientific literature into downstream applications like digital twins and habitability modeling for Mars. The output from this pipeline looks promising, but further improvements are needed to increase extraction accuracy and factual consistency.

19.
arXiv (quant-ph) 2026-06-15

Probing Many-Body Phenomena with Atomically Thin Nuclear Spin Layers in Diamond

arXiv:2510.27374v2 Announce Type: replace Abstract: Quantum simulation aims to recreate complex many-body phenomena in controlled environments, offering insights into dynamics that are otherwise difficult to model. Existing platforms, however, are often complex and costly to scale, typically requiring ultra pure vacuum or low temperatures. Here, we introduce a platform based on a thin, strongly interacting ${}^{13}C$ nuclear spin layer in diamond that allows controlled exploration of many-body dynamics at room temperature. Nearby nitrogen-vacancy centers enable polarization, readout, and, combined with radio-frequency fields, coherent control of the nuclear spins. We demonstrate strong, tunable interactions among the nuclear spins and use the system to probe discrete time-crystalline order across varying interaction ranges. By combining ease of use with operation at ambient temperatures, our work opens new opportunities for investigating strongly correlated many-body effects.

20.
arXiv (CS.AI) 2026-06-17

FoundCause: Causal Discovery with Latent Confounders from Observational Data

arXiv:2606.17516v1 Announce Type: cross Abstract: Causal discovery from observational data remains challenging due to the need to recover directed structure and latent confounding without interventions. We propose FoundCause, an amortized causal discovery model trained entirely on synthetic data that maps datasets directly to causal graphs in a single forward pass. By learning from large collections of simulated structural causal models, FoundCause captures transferable statistical patterns that generalize beyond individual datasets. The architecture incorporates several key inductive biases for causal discovery. It uses a permutation-invariant transformer encoder with alternating attention over samples and variables to jointly model cross-variable dependence and per-variable distributions. Pairwise statistical features derived from classical asymmetry measures are injected through statistics-conditioned attention, guiding the model toward known causal signals. A factorized decoder separates edge existence from direction, while a triangular refinement module enables reasoning over higher-order causal motifs such as chains and colliders. In addition, a dedicated confounder module based on learnable latent tokens explicitly models hidden common causes, and the model explicitly handles missing data via its masked input representation. To our knowledge, FoundCause is the first amortized causal discovery approach to explicitly model latent confounding. FoundCause outperforms 11 classical non-amortized methods (e.g., PC, GES, NOTEARS-style optimization) and 4 amortized causal discovery methods on 15 real-world datasets, achieving +9.6% improvement in $F_1$, +1.2% in AUROC, and an 18.9% reduction in structural Hamming distance relative to the strongest non-amortized methods, while performing inference in a single forward pass.

21.
arXiv (CS.CV) 2026-06-17

Structured Adversarial Camouflage via Voronoi Diagrams

Pixel-wise adversarial patches are computationally heavy and often visually detectable, limiting utility in security-critical systems. We present adversarial Voronoi camouflage that optimizes only seed-point locations under fixed, printable palettes using a soft assignment, producing structured, splinter camouflage-like patterns without additional regularization. Evaluated on person detection with COCO-style AP@[.5:.95], naive placement (Inria -> COCO) performs comparably bad, while garment-level application via segmentation mask (3DPeople) results in a significant AP drop. The attack transfers to out-of-domain backgrounds and across detector families (YOLOv9/10/11/12), indicating robustness in black-box settings. Repainting with different palettes largely nullifies the effect, and single-color tweaks show limited tolerance (

22.
bioRxiv (Bioinfo) 2026-06-21

OracleScreen-LILRB4: Machine Learning-Guided Discovery of Myeloid Immune Checkpoint Binders Validated in Patient-Derived Cells

The identification of small molecule modulators of immune checkpoint proteins remains a significant challenge in drug discovery due to the flat, featureless nature of protein-protein interaction interfaces and the characteristically low hit rates observed in conventional high-throughput screening campaigns. Here we report OracleScreen-LILRB4, an ensemble machine learning framework trained on quantitative biophysical screening data from two structurally diverse compound libraries (19,800 compounds total) screened against the myeloid immune checkpoint leukocyte immunoglobulin-like receptor B4 (LILRB4/ILT3). By formulating binding prediction as a regression task targeting continuous {Delta}Fnorm values rather than binary hit classifications, OracleScreen-LILRB4 achieved a mean Spearman R of 0.61 and ROC-AUC of 0.86 under scaffold-aware cross-validation. Prospective virtual screening of a 45,760-member compound library and experimental validation of the top 200 predictions yielded a 28.5% hit rate, representing a 15.0-fold enrichment over baseline, with 16 compounds demonstrating nanomolar-affinity LILRB4 (ILT3) engagement. Lead compounds ORS-22 and ORS-14 restored anti-tumor immune activity across patient-derived colorectal cancer and acute myeloid leukemia co-culture systems, reversing SCG2-mediated immunosuppression and recovering cytotoxic T-cell function. These findings establish OracleScreen-LILRB4 as an effective computational framework for accelerating small molecule discovery against non-enzymatic immune checkpoint targets.

23.
arXiv (CS.CV) 2026-06-17

Looped World Models

Current world models face a fundamental tension: faithful long-horizon simulation demands deep computation, but deeper models are expensive to deploy and prone to compounding errors. We resolve this by introducing Looped World Models (LoopWM), which are the first looped architectures for world modelling. Our method iteratively refines latent environment states through a parameter-shared transformer block. This yield up to 100x parameter efficiency over conventional approaches with adaptive computation that automatically scales depth to match the complexity of each prediction step. Orthogonal to scaling model size and training data, LoopWM establishes iterative latent depth as a new scaling axis for world simulation, which might significantly push the community forward.

24.
arXiv (CS.AI) 2026-06-17

Feynman Kac Reweighted Schrödinger Bridge Matching for Surface-Based Tau PET Harmonization

arXiv:2606.17420v1 Announce Type: cross Abstract: Tau PET imaging is central to tracking Alzheimer's disease progression, but systematic differences between scanners, protocols, and radiotracers across sites introduce nonbiological variability that inflates biomarker variance, reduces sensitivity to disease effects, and can bias downstream clinical assessments. Harmonization methods aim to remove these site-induced shifts while preserving biologically meaningful signal, yet existing approaches struggle when source and target cohorts differ in subgroup composition, risking conflation of site effects with biological variation such as tau-positivity status. We propose the Feynman Kac Reweighted Schröodinger Bridge Matching (FKRSBM) model to address this problem. Rather than routing data through a Gaussian noise prior as in diffusion-based methods, FKRSBM learns a direct stochastic transport process between source and target distributions via entropy-regularized optimal transport. To enforce biologically consistent transport, FKRSBM incorporates a subgroup-aware endpoint proposal derived from a Feynman Kac reweighting of the reference bridge measure, implemented entirely through stratified importance sampling at the data level and requiring no changes to the underlying bridge-matching solver or network architecture. For surface-based neuroimaging, FKRSBM employs a spherical convolutional backbone operating on cortical meshes to perform vertex-level harmonization. We evaluate the method on tau PET SUVR maps, harmonizing PI-2620 data from the HABS-HD cohort into the AV-1451 domain of ADNI. Compared against ComBat, CycleGAN, a diffusion-based method (DF), and unregularized Diffusion Schröodinger Bridge Matching (DSBM), FKRSBM achieves superior distributional alignment, reduced tau-positivity sign mismatch, stronger APOE subgroup alignment, and improved downstream disease classification performance.

25.
arXiv (CS.CL) 2026-06-11

Cross-Layer Discrete Concept Discovery for Interpreting Language Models

Interpreting language models remains challenging due to the existence of residual stream, which linearly mixes and duplicates features across adjacent layers, causing single-layer analyses to miss this cross-layer structure. Cross-layer sparse autoencoders (SAEs) address layer mixing but operate in continuous space, where concepts split across many neurons without clear boundaries. We introduce Cross-Layer Vector Quantized-Variational Autoencoder (CLVQ-VAE), a novel framework which maps representations from a lower layer to a higher layer through a discrete vector-quantization bottleneck, collapsing duplicated residual-stream features into compact, interpretable concept vectors. Our approach combines top-k temperature-based sampling with exponential moving average (EMA) codebook updates, providing controlled exploration of the discrete latent space while maintaining codebook diversity. Across both encoder- and decoder-based models on ERASER-Movie, Jigsaw, and AGNews, CLVQ-VAE outperforms clustering, single-layer vector quantized-variational autoencoder (VQ-VAE), and sparse autoencoder (SAE) baselines across three evaluation axes: removing identified concepts drops model accuracy by up to 93%, LLM judges rank our concepts first in 66.7% of comparisons, and human annotators recover model predictions from our visualizations with 78% accuracy versus 54% for clustering.