Academic Intelligence · Curated Daily

探索全球前沿学术脉络

AcademicHub 汇聚顶级期刊与预印本平台的实时文献。定制您的专属科研雷达,利用大语言模型自动生成交叉领域文献分析简报。

01.
Nature (Science) 2026-06-17

The EU needs to back its ambition to end animal testing with cash

作者: 未知作者

The European Union has declared that it wants to stop using animals in chemical safety testing. Its goal will need a timeline and a serious funding commitment. The European Union has declared that it wants to stop using animals in chemical safety testing. Its goal will need a timeline and a serious funding commitment.

02.
arXiv (CS.CL) 2026-06-11

Dummy Backdoor as a Defense: Removing Unknown Backdoors via Shared Internal Mechanisms for Generative LLMs

Backdoor attacks pose a serious threat to the safety and reliability of Large Language Models (LLMs), as they cause models to behave normally on clean inputs while producing attacker-specified responses when hidden triggers are present. Removing such unknown backdoors is particularly challenging when the defender does not know the backdoor attack types or the internal mechanisms formed through backdoor training. In this work, we propose a simple but effective backdoor removal method based on shared internal mechanisms across different backdoors. First, we show that different backdoors with the same task (attack objective) induce similar trigger-activated changes in the internal activations. Motivated by this observation, our method intentionally embeds a backdoor with a known trigger (dummy backdoor) and then removes it through further fine-tuning on dummy-triggered inputs paired with clean responses. Since the dummy backdoor and the unknown backdoor can rely on shared internal mechanisms, removing the dummy backdoor also reduces the effect of the unknown backdoor. We evaluate our method on three backdoor attack types across multiple model families. Experimental results show that our method substantially reduces the attack success rate of the unknown backdoor while preserving model utility, outperforming representative existing defense methods in both backdoor removal effectiveness and utility preservation. These findings suggest that a defender-controllable backdoor can serve as a helpful proxy for mitigating unknown backdoors in generative LLMs.

03.
arXiv (CS.CV) 2026-06-18

Where Will They Go? Modelling Multimodal Pedestrian Manoeuvres from Ego-centric Videos

Pedestrian trajectory prediction from an ego-centric camera is challenging since it depends on complex interactions with vehicles and scene context, as well as the intention of the pedestrian. By modelling correlation and intent from the historical and future trajectories of the pedestrian, it will usually result in a multimodal (i.e. multiple modes) distribution. Existing stochastic predictors often sample multiple futures from a single unimodal distribution, which can yield sub-optimal 'mixed-mode' trajectories that lie between distinct motion patterns and become implausible in real scenes. In this paper, we propose MMPM, a mode-aware framework that separately models future trajectory distributions into semantically meaningful modes based on the pedestrian's crossing behavior. MMPM consists of two modules: behavior-aware Pedestrian Interaction Module (PIM) that jointly captures pedestrian-vehicle and pedestrian-environment interactions by introducing gaze, head and hand gesture, and a CVAE-based Mode-aware Trajectory Predictor (MTP) module to model the future trajectory distributions on two modes, crossing and non-crossing the road, separately. A query-based decoder further enforces mode consistency during decoding. Experiments on PIE and JAAD datasets show that our method surpasses state-of-the-art baselines. Our proposed MTP is model-agnostic, which can be integrated into existing frameworks such as BiTrap-NP and SGNet-ED to further improve future trajectory prediction performance. We additionally introduce a data-driven validation protocol that matches predictions to spatio-temporally consistent ground-truth trajectories, demonstrating improved frame-wise displacement errors over previous work.

04.
arXiv (CS.CV) 2026-06-18

S3OD: Towards Generalizable Salient Object Detection with Synthetic Data

Salient object detection exemplifies data-bounded tasks where expensive pixel-precise annotations force separate model training for related subtasks like DIS and HR-SOD. We present a method that dramatically improves generalization through large-scale synthetic data generation and ambiguity-aware architecture. We introduce S3OD, a dataset of over 139,000 high-resolution images created through our multi-modal diffusion pipeline that extracts labels from diffusion and DINO-v3 features. The iterative generation framework prioritizes challenging categories based on model performance. We propose a streamlined multi-mask decoder that handles the inherent ambiguity in salient object detection by predicting multiple valid interpretations. Models trained only on synthetic data achieve 20-50% error reduction in cross-dataset generalization, while fine-tuned versions reach state-of-the-art performance across DIS and HR-SOD benchmarks.

06.
arXiv (CS.CL) 2026-06-16

GePBench: Evaluating Fundamental Geometric Perception for Multimodal Large Language Models

Geometric shapes play important roles in both physical world and human cognition. While multimodal large language models (MLLMs) have made significant advancements in visual understanding, their abilities to recognize geometric shapes and their spatial relationships, which we term geometric perception, are not explicitly and systematically explored. To address this gap, we introduce GePBench, a novel benchmark specifically designed to assess the geometric perception capabilities of MLLMs. Our extensive evaluations reveal that even the current state-of-the-art MLLMs exhibit significant deficiencies in geometric perception tasks. Furthermore, we show that models trained with GePBench data demonstrate considerable improvements on a wide range of downstream tasks, highlighting the critical role of geometric perception in enabling advanced multimodal applications. Our code and datasets are available at \href{https://github.com/Changhao-Xiang/GePBench}{https://github.com/Changhao-Xiang/GePBench}.

07.
arXiv (CS.AI) 2026-06-16

The Perils of Agency: How Developers Perceive, Prioritize, and Address Risks in Agentic AI Products

arXiv:2606.15485v1 Announce Type: cross Abstract: Agentic AI systems act autonomously, use tools, adapt to context, and operate in complex real-world environments. However, these same characteristics can create or exacerbate product risks. We studied how industry developers (n=35) perceive, prioritize, and address the risks in their agentic AI products. We found that developers' perceptions of risk were closely tied to the qualities that made the product agentic, such as autonomy, tool use, and usage in a real-world context. Developers prioritized product and business risks before considering downstream societal risks like job displacement and end-user privacy. This prioritization also impacted developers' ability and motivation to mitigate agentic risks. Finally, developers lacked mature controls for containing agentic risks, often relying on constraining the same characteristics that make agents useful: e.g., autonomy and goal complexity. These findings reveal a capability vs. risk control tension in agentic AI development: developers need to address risks that emerge from agentic capabilities, yet they currently have limited support for doing so without constraining agentic functionality.

08.
arXiv (CS.AI) 2026-06-17

Ensemble RL through Classifier Models: Enhancing Risk-Return Trade-offs in Trading Strategies

作者:

arXiv:2502.17518v3 Announce Type: replace-cross Abstract: This paper presents a comprehensive study on the use of ensemble Reinforcement Learning (RL) models in financial trading strategies, leveraging classifier models to enhance performance. By combining RL algorithms such as A2C, PPO, and SAC with traditional classifiers like Support Vector Machines (SVM), Decision Trees, and Logistic Regression, we investigate how different classifier groups can be integrated to improve risk-return trade-offs. The study evaluates the effectiveness of various ensemble methods, comparing them with individual RL models across key financial metrics, including Cumulative Returns, Sharpe Ratios (SR), Calmar Ratios, and Maximum Drawdown (MDD). Our original experimental results demonstrate that ensemble methods often outperform base models in terms of risk-adjusted returns, providing better management of drawdowns and overall stability. However, both the original analysis and the additional reproduction reported in this version show that ensemble performance is sensitive to the choice of variance threshold \(\tau\), classifier group, RL-agent pair, and market universe. The reproduction evidence strengthens the conclusion that classifier-assisted ensemble selection can improve robustness, while also clarifying that the advantage is conditional rather than automatic across all datasets. This study emphasizes the value of combining RL with classifiers for adaptive decision-making, with implications for financial trading, robotics, and other dynamic environments.

09.
arXiv (CS.CV) 2026-06-16

VinQA: Visual Elements Interleaved Long-form Answer Generation for Real-World Multimodal Document QA

Real-world documents combine text with tables, charts, photographs, and diagrams arranged in diverse layouts, yet existing research on multimodal large language models (MLLMs) for document QA predominantly produces text-only responses, underutilizing these visual elements. We introduce VinQA, a dataset for long-form answer generation where cited visual elements are explicitly interleaved with their supporting text and grounded in relevant document pages. To support this task, we study two encoding methods for feeding raw document page images into an MLLM, along with their visual-element citation mechanisms: (1) Page Encoding, which directly encodes full-page images with bounding boxes of visual elements and treats these boxed regions as citable units; and (2) Modality Encoding, which parses each page to extract text and crop visual elements, encodes them separately, and uses these cropped elements as citable units. In our experiments, we propose M-GroSE, a multimodal evaluation framework extending GroUSE to assess answers along four dimensions: completeness, answer relevancy, faithfulness, and unanswerability. We additionally report Visual Source F1 to directly measure visual citation accuracy. Although proprietary frontier models still achieve the best overall scores on the VinQA test split, fine-tuning open Qwen2.5-VL models on the training split substantially improves their performance and narrows this gap. Modality Encoding is initially more robust for complex documents with long text, many visual elements, and diverse citation requirements. After training on VinQA, however, Page Encoding reaches a comparable level, competing effectively even without the explicit parsing used in Modality Encoding. Finally, Visual G-Eval, an MLLM-based judge, confirms that fine-tuned models insert visual elements at semantically appropriate positions with faithful supporting text.

10.
arXiv (CS.CV) 2026-06-18

Automatic ply-specific analyses of CFRP micrographs using shortest-path-based ply distinction

We present an automated approach to distinguish between ply instances in semantic segmentation masks of high-resolution carbon-fiber reinforced polymer micrographs. Interpreting the segmentation mask as a graph with pixels as vertices, enables us to use a shortest-path algorithm yielding the ply-separating paths. Thereby, we bridge the gap between semantic segmentation and ply instance segmentation using global information. We successfully apply our approach on high-resolution micrographs featuring a broad range of characteristics like artificially added gaps in single or multiple plies, different stacking sequences and ply traversing cracks. Assigning each fiber pixel to a ply based on the calculated paths, allows for a comprehensive, quantitative ply analysis with respect to its microstructural properties like the local fiber volume fraction as well as locally resolved ply and interleaf layer thickness. These insights help to reveal manufacturing-induced inhomogeneities, draw conclusions on manufacturing parameters and link mechanical properties to underlying microstructural imperfections.

11.
arXiv (CS.AI) 2026-06-11

GILT: An LLM-Free, Tuning-Free Graph Foundational Model for In-Context Learning

arXiv:2510.04567v3 Announce Type: replace-cross Abstract: Graph Neural Networks (GNNs) are powerful tools for processing relational data but often struggle to generalize to unseen graphs, giving rise to the development of Graph Foundational Models (GFMs). However, current GFMs are challenged by the extreme heterogeneity of graph data, where each graph can possess a unique feature space, label set, and topology. To address this, two main paradigms have emerged. The first leverages Large Language Models (LLMs), but is fundamentally text-dependent, thus struggles to handle the numerical features in vast graphs. The second pre-trains a structure-based model, but the adaptation to new tasks typically requires a costly, per-graph tuning stage, creating a critical efficiency bottleneck. In this work, we move beyond these limitations and introduce Graph In-context Learning Transformer (GILT), a framework built on an LLM-free and tuning-free architecture. GILT introduces a novel token-based framework for in-context learning (ICL) on graphs, reframing classification tasks spanning node, edge and graph levels in a unified framework. This mechanism is the key to handling heterogeneity, as it is designed to operate on generic numerical features. Further, its ability to understand class semantics dynamically from the context enables tuning-free adaptation. Comprehensive experiments show that GILT achieves stronger few-shot performance with significantly less time than LLM-based or tuning-based baselines, validating the effectiveness of our approach. Our code is available at: https://github.com/yiming421/inductnode/.

12.
arXiv (CS.AI) 2026-06-11

Are LLMs Bad at Moral Reasoning?

arXiv:2606.11635v1 Announce Type: cross Abstract: For highly capable AI systems to operate safely in dynamic, open-ended environments, they must be able to identify, understand, and respond to moral reasons for action, and constrain their behaviour accordingly. A growing body of research aims to evaluate this capacity – moral competence – in today's most capable AI systems, recently reaching broadly pessimistic conclusions. One of the most ambitious such papers collects gold-standard human-authored rubrics for evaluating moral reasoning in 1,000 cases, and benchmarks frontier AI models against those rubrics, with underwhelming results. In this paper, we argue that the MoReBench dataset can be redeployed to give a much more optimistic picture of LLMs' moral reasoning (an essential part of moral competence). We show that if, instead of scoring LLMs' responses to these cases against these rubrics, we instead give the LLMs the same task given to humans – to generate scoring rubrics for the moral analysis of particular cases – the rubrics they generate are both better calibrated to the human rubrics than their open-ended responses, and, where they differ, plausibly reflect nothing more than the vast dimensionality of most moral problems, as well as highlighting some human departures from the "rubric for creating rubrics". Taking these points into consideration, the MoReBench dataset suggests that LLMs are significantly more capable at moral reasoning than was previously believed.

13.
arXiv (CS.LG) 2026-06-17

Decision-Driven Geosteering Under Uncertainty: A Unified Framework for Sequential Decision Optimization

arXiv:2606.17331v1 Announce Type: new Abstract: Geosteering requires navigating a well trajectory through an unknown geological configuration, while sequentially updating decisions based on indirect measurements acquired during drilling. This work presents an uncertainty-aware geosteering framework that tightly integrates particle filtering for probabilistic subsurface interpretation with value-based reinforcement learning for sequential decision-making. Geological uncertainty ahead of the drill bit is represented explicitly through a particle filter (PF), enabling belief-informed control rather than deterministic trajectory correction. The framework couples PF belief updates with belief-informed decision policies and evaluates three decision-making options that operate under identical uncertainty representations: an interpretable Approximate Dynamic Programming (ADP) scheme, a Deep Q-learning baseline, and a Dual Deep Reinforcement Learning (Dual DRL) architecture trained with a target Q-network scheme for stability, using a dueling (value/advantage) decomposition for Q-value parameterization. Beyond final placement performance, we assess policy behavior using stability-oriented metrics that quantify steering smoothness over time, providing additional operational insight into how decision policies respond as uncertainty evolves. The framework is integrated with an API for validation within an industrial geosteering simulator under realistic measurement noise and drilling constraints. Using identical geological realizations, operational limits, and reward definitions across methods, the experiments provide a controlled and high-fidelity evaluation of how alternative decision policies behave throughout the drilling process, rather than evaluating performance solely from the final well trajectory.

14.
arXiv (CS.AI) 2026-06-19

Hybrid ANN-SNN Pipeline with Local Plasticity

arXiv:2606.20151v1 Announce Type: cross Abstract: This work proposes a hybrid ANN-SNN pipeline that effectively leverages the rich embeddings of pretrained artificial neural networks (ANNs) to enable high-performance spiking neural networks (SNNs). The architecture couples a pretrained EfficientNet encoder with a CoLaNET spiking classifier. We convert the encoder's activations into spike trains via rate-coding and train the subsequent SNN classifier using local, biologically inspired learning rules, bypassing end-to-end gradient propagation. This approach achieves 99.09% accuracy on a 64-class ImageNet benchmark, demonstrating performance on par with conventional deep networks. The work presents a biologically plausible and efficient framework for adapting powerful pretrained encoders to downstream spiking neural network tasks.

15.
arXiv (CS.CL) 2026-06-16

Entropy-Aware On-Policy Distillation of Language Models

On-policy distillation is a promising approach for transferring knowledge between language models, where a student learns from dense token-level signals along its own trajectories. This framework typically uses reverse KL divergence, encouraging the student to match the teacher's high-confidence predictions. However, we show that the mode-seeking property of reverse KL reduces generation diversity and yields unstable learning signals when the teacher distribution has high entropy. To address this, we introduce Entropy-Aware On-Policy Distillation. Our key idea is augmenting the standard reverse KL objective with forward KL when teacher entropy is high, capturing the full range of plausible outputs while retaining precise imitation elsewhere. It balances mode-seeking precision with mode-covering robustness without sacrificing on-policy training efficiency. Experiments show that our method maintains generation diversity (sustained token-level entropy) and improves student-teacher alignment (lower forward KL on high-entropy tokens). Across six math reasoning benchmarks, this yields Pass@8 accuracy gains of +1.37 for Qwen3-0.6B-Base, +2.39 for Qwen3-1.7B-Base, and +5.05 for Qwen3-4B-Base compared to baseline on-policy distillation methods. These results demonstrate that accounting for teacher uncertainty is essential for maintaining diversity and achieving effective knowledge transfer.

16.
arXiv (CS.CL) 2026-06-16

Taylor-Calibrate: Principled Initialization for Hybrid Linear Attention Distillation

Hybrid linear attention models offer an appealing path to faster long-context inference: they reduce the quadratic cost and KV-cache burden of full softmax attention while retaining much of the quality of Transformer models. A practical way to obtain such models is to convert a pretrained Transformer instead of pretraining a new architecture from scratch, but this conversion is still brittle. Simply copying the teacher attention projections into a Gated DeltaNet (GDN) student does not specify the new recurrent decay, write, and output-gating dynamics. As a result, the converted model often starts in a poor dynamical regime and must spend many distillation tokens repairing initialization rather than learning the remaining teacher behavior. We propose Taylor-Calibrate, a lightweight initialization method for hybrid GDN students. The method uses Taylor-guided teacher attention statistics to set the value projection, memory timescale, write gates, and output gate, then applies a short per-layer alignment step to match each converted layer to the teacher output. Across four teacher settings and three retained-layer policies, Taylor-Calibrate gives substantially stronger zero-shot students, with up to an 88x improvement in a representative ablation, and reaches matched recovery targets with 4.9x–9.2x fewer training tokens than naive conversion.

17.
medRxiv (Medicine) 2026-06-16

Optimal Clinical Trials Platform for Progressive Multiple Sclerosis (OCTOPUS): protocol for an international, multi-arm, multi-stage, platform, randomized controlled, double-blind, phase 3 clinical trial.

Introduction Current treatments for multiple sclerosis (MS) do not address the pathological processes of neurodegeneration and chronic demyelination. This, coupled with the significant challenges of translating promising phase 2 results to phase 3 trial success, highlights the need for more efficient trial designs, such as platform multi-arm multi-stage (MAMS) trial approaches. MAMS trials have demonstrated success in areas such as oncology and infectious diseases. They are typified by a statistically robust core trial design that allows the addition of further treatment arms and utilisation of interim outcome analyses at pre-defined timepoints, to determine whether to terminate a treatment arm early or proceed to the final outcome analysis. To address the challenges in progressive multiple sclerosis (PMS) treatment discovery, the Optimal Clinical Trials Platform for PMS (OCTOPUS) trial was developed. It currently utilises MRI whole-brain atrophy as its interim outcome measure and the clinically relevant composite Expanded Disability Status Scale Plus (EDSS-Plus) as its final outcome measure. A rigorous and systematic drug selection process that assessed preclinical in vitro and animal model evidence, along with additional human data, led to the prioritisation of R/S-alpha lipoic acid (R/S-ALA) and metformin for testing against placebo, targeting pathobiological mechanisms relevant to PMS. All participants will be eligible to receive the current standard of care, including disease-modifying treatments (DMTs). Method and analysis OCTOPUS will be a multi-centre, randomised, placebo-controlled, double-blind, phase 3, MAMS trial of participants aged 25 to 70 years (inclusive) with PMS and an EDSS score of 4.0 to 8.0 (inclusive). Steady progression must be the major cause of increasing disability rather than relapse in the preceding 2 years. In the trial s first candidate drug cycle, participants will be allocated to R/S-ALA, metformin, or placebo in a 1:1:1 ratio. Cycle 1 active treatments will start as R/S-ALA 600 mg once daily, increased after 4 weeks to 600 mg twice daily, or metformin 1 g once daily, increased after 4 weeks to 1 g twice daily. The trial will be multinational, with participation from 28 hospitals across the UK and 10 hospitals in Australia. Clinician-reported measures will include: the EDSS-Plus and the individual components: EDSS, Timed 25 Foot Walk (T25FW); 9 Hole Peg Test (9HPT); Symbol Digit Modalities Test (SDMT); Sloan Low Contrast Visual Acuity (SLCVA); and Relapse assessment. Patient-reported outcomes include MS specific walking, fatigue, pain, and impact scales. We will include a health economic analysis. Analysis stage 1 will require randomisation of 125 participants per arm and utilise MRI percentage brain volume change (PBVC) with the Structural Image Evaluation using Normalisation of Atrophy (SIENA) technique from baseline to 78 weeks. A positive outcome in analysis stage 1 will detect a 0.15% per year whole brain atrophy difference with a one-sided alpha of 0.35 and power of 95%, ensuring a low probability of erroneously rejecting a treatment arm at this stage. Any arms that show a positive effect will proceed to final analysis stage 2. Analysis stage 2 will require 600 participants per arm. Participants included in stage 1 will also be included in the stage 2. Analysis stage 2 will evaluate time to 6-month confirmed disability progression in the EDSS-Plus, in order to detect a 25% hazard ratio reduction with 90% power and an alpha of 0.05. Assuming one treatment arm proceeds to analysis stage 2, the trial will recruit approximately 1,200 participants and last about 6 years. This is approximately two-thirds the size and half the duration of separately conducted two-arm phase 2 and 3 trials. Ethics and dissemination The protocol was approved by the London Hampstead REC (22/LO/0622). This manuscript is based on protocol version 8.0, 28th August 2025. The findings of this trial will be disseminated through peer-reviewed publications and conference presentations. There will be a close communication strategy developed with the UK MS Society (MSS) and full patient and public involvement and engagement (PPIE). Trial registration ISRCTN: 14048364 EudraCT number: 2021-003034-37 CTA 20363/0445 IRAS number: 1003943 Secondary identifying numbers: ND001, CPMS 54274 Strengths and limitations - The OCTOPUS trial will be the first platform multi-arm multi-stage phase 3 trial in PMS, offering the potential to significantly expedite clinical trial processes with advantages in cost- and time-efficiency, focusing specifically on the poorly treated pathobiological processes of chronic neurodegeneration and demyelination - It will begin by assessing two promising drug candidates, immediate-release metformin and R/S-ALA, and will expand over the duration of the trial to include more drug arms under the same trial master protocol - The flexible and statistically robust trial design means that several components of the design (such as the early analysis stage 1 interim outcome) can be updated in line with evolving scientific knowledge - It will ultimately be the largest ever investigator-initiated phase 3 trial in PMS - It will include a range of national and international trial sites, including neuroscience centres and district general hospitals - It will have a high inclusion limit for age (up to 70 years) and disability (up to EDSS 8.0) - Several components (the telephone EDSS and virtual patient-reported outcome measures) will be amenable to remote collection increasing inclusivity and thus addressing public and participant suggestions, while minimising the risk of missing data - The main challenges in this trial design are the statistical and methodological complexity involved in design and implementation, and interpretation of interim trial results. Conclusion The trial launched cycle 1 in January 2023. Analysis stage 1 recruitment of 375 participants was achieved in November 2024, enabling planned interim analysis stage 1 to be conducted by late 2026 (Figure 1). On the 1st of June 2026, in the UK, 24 sites are active with a further 4 in set-up as part of stage 2, and in the Australian extension, Platform Adaptive Trial for Remyelination and Neuroprotection in Multiple Sclerosis (PLATYPUS), 1 site is active, with 9 additional sites in set-up.

18.
arXiv (CS.AI) 2026-06-17

FllumaOne: A Code-Native Multimodal CAD Dataset with Executable Programs and Kernel-Validated Feature Histories

作者:

arXiv:2606.17696v1 Announce Type: new Abstract: Parametric computer-aided design records both final geometry and the ordered construction history that determines how a part can be edited. Datasets for editable CAD research should therefore expose modeling operations, parameters, and feature dependencies together with validated geometry. We introduce FllumaOne, a code-native multimodal CAD dataset whose models are generated by executable Python programs in Flluma, a Qt/C++ OpenCASCADE-based CAD system. Each sample aligns its program with a structured feature tree, a training-oriented intermediate representation, STEP geometry, a surface point cloud, natural-language descriptions, metadata, and eight canonical visible-edge renderings. The primary release, FllumaOne-100K, contains 100,000 accepted samples across four template-level complexity regimes. Programs are executed and retained only after kernel geometry, solid validity, and export checks; release reports also record modality completeness and split-level duplicate tests. A Qwen2.5-Coder-1.5B LoRA baseline trained on 80,000 samples achieves 99.98% Python syntax validity, 99.97% Flluma build success, and 99.14% STEP-export validity on the held-out 10,000-sample test split. For the 9,909 predictions converted to surface point clouds, the mean normalized Chamfer Distance is 0.002124. The dataset supports conditioned CAD reconstruction, executable program synthesis, feature-tree prediction, B-Rep analysis, retrieval, design completion, and editable reverse engineering.

19.
bioRxiv (Bioinfo) 2026-06-21

Expanding the GUSome: Structure-guided identification and characterization of gut microbial β-glucuronidases

The gut microbiome-encoded {beta}-glucuronidase (GUS) enzymes have a significant effect on human physiology through their deglucuronidation activity on endogenous and exogenous glucuronides. GUS activity also significantly influences the pharmacokinetics, efficacy and toxicity of various drugs including chemotherapeutic drugs. Given their crucial role in drug metabolism, GUS enzymes have emerged as promising targets for therapeutic intervention. Here, we have identified and characterized 79 unique GUS enzymes through a structure-guided approach. Structural modelling of these GUS enzymes revealed a conserved core and active-site residues with significant variations in the number and nature of the C-terminal domains. A new classification system based on the number and type of additional C-terminal domains is presented for the GUS proteins. Further, GUS enzymes have been categorized into different loop categories linked to their substrate preferences. The relationship between domain architecture and loop-type is explored by sequence similarity network analysis. We could successfully express, purify and validate GUS processing capability of a panel of identified GUS proteins. The nature of oligomer organization has been deciphered by SEC and DLS studies. Further, we have identified additional GUS enzymes capable of processing SN-38G, glucuronidated form of anticancer drug, irinotecan. These newly identified GUS enzymes will offer valuable insights into gut microbial GUS diversity and their role in understanding the population-specific drug-induced adverse effects on human health.

20.
arXiv (CS.CV) 2026-06-16

RLPR: Radar-to-LiDAR Place Recognition via Two-Stage Asymmetric Cross-Modal Alignment for Autonomous Driving

All-weather autonomy is critical for autonomous driving, which necessitates reliable localization across diverse scenarios. While LiDAR place recognition is widely deployed for this task, its performance degrades in adverse weather. Conversely, radar-based methods, though weather-resilient, are hindered by the general unavailability of radar maps. To bridge this gap, radar-to-LiDAR place recognition, which localizes radar scans within existing LiDAR maps, has garnered increasing interest. However, extracting discriminative and generalizable features shared between modalities remains challenging, compounded by the scarcity of large-scale paired training data and the signal heterogeneity across radar types. In this work, we propose RLPR, a robust radar-to-LiDAR place recognition framework compatible with single-chip, scanning, and 4D radars. We first design a dual-stream network to extract structural features that abstract away from sensor-specific signal properties (e.g., Doppler or RCS). Subsequently, motivated by our task-specific asymmetry observation between radar and LiDAR, we introduce a two-stage asymmetric cross-modal alignment (TACMA) strategy, which leverages the pre-trained radar branch as a discriminative anchor to guide the alignment process. Experiments on four datasets demonstrate that RLPR achieves state-of-the-art recognition accuracy with strong zero-shot generalization capabilities.

21.
arXiv (CS.CL) 2026-06-12

From Tokens to Faces: Investigating Discrete Speech Representations for 3D Facial Animation

The choice of speech representation is critical in speech-driven 3D facial animation. Representations differ in what they encode: SSL features emphasize segmental and semantic cues, neural codecs yield latents optimized for acoustic reconstruction, and ASR-style objectives produce label-based spaces. We evaluate four speech representation families for 3D facial synthesis, comparing their facial reconstruction quality across two facial decoders using objective metrics and a perceptual evaluation. We additionally conduct probing analyses that relate tokenized representations to phonetic units and to articulatory deformations. We found that encoding phonetic classes is beneficial for accurate facial animation prediction on both semantic and label-based representations with comparable facial animation quality. From the latter, we introduce an Audio Visual Text-to-Speech (AVTTS) pipeline that leverages, as a shared space, discrete representations to decode speech and 3D facial motion.

22.
bioRxiv (Bioinfo) 2026-06-17

DesignMaster: A Multi-Conditional Diffusion Framework for Rational PROTAC Design

Motivation: Proteolysis-targeting chimeras (PROTACs) enable targeted protein degradation through ternary complex formation with E3 ubiquitin ligase. However, the rational design of PROTACs remains highly challenging due to limited structure-activity relationship data and the vast conformational diversity of linkers. Existing computational approaches can be broadly divided into structure-based ternary modelling methods and fragment-based linker generation models. Although these approaches have advanced PROTAC design, they typically neglect key physicochemical constraints and linker-length control during the generation process, causing the generated PROTACs to lack balanced structural properties required for effective ternary complex formation with drug-like characteristics. Results: To address these limitations, we propose DesignMaster, a diffusion-based generative framework that explicitly incorporates linker length and physicochemical properties as controllable conditioning signals. DesignMaster employs an E(3)-equivariant graph Transformer with a gated multi-condition fusion module to inject linker length and physicochemical constraints throughout the diffusion process, enabling fine-grained and constraint-aware molecular generation. Experiments on PROTAC-DB 2.0 and 3.0 demonstrate that DesignMaster outperforms state-of-the-art baselines, with a 3.2% improvement in validity and a 34.4% improvement in recovery. The Case study shows DesignMaster achieves a 51.78% reduction in RMSD when predicting the linker of PROTAC BCPyr targeting 6W7O, highlighting its potential for practical structure-guided PROTAC design. Availability: The source code and datasets are available at https://github.com/ABILiLab/DesignMaster.

23.
arXiv (CS.AI) 2026-06-16

AdaSTORM: Scaling LLM Reasoning on Dynamic Graphs via Adaptive Spatio-Temporal Multi-Agent Collaboration

arXiv:2606.16328v1 Announce Type: new Abstract: Large Language Models (LLMs) demonstrate remarkable potential in dynamic graph reasoning, but suffer from a scaling bottleneck: current models can only handle graphs with tens of nodes, constrained by exponential reasoning overhead and finite context windows. While multi-agent systems (MAS) offer collective reasoning and topology-aware orchestration, capabilities naturally suited for graph-structured tasks, their application to dynamic graphs remains unexplored. This paper presents Scaling LLM Reasoning on Dynamic Graphs via Adaptive Spatio-Temporal Multi-Agent Collaboration (AdaSTORM), a framework that reformulates large-scale dynamic graph reasoning into two stages: (i) Adaptive Partitioning, partitioning large-scale dynamic graphs into subregions that match the model's reasoning capacity while minimizing inference cost; and (ii) Collaborative Reasoning, aligning graph partition topologies with a spatio-temporal decoupled multi-agent architecture. AdaSTORM is the first multi-agent framework tailored for dynamic graph reasoning. Extensive experiments show that AdaSTORM successfully breaks through the scaling bottleneck, scaling reasoning to thousand-node graphs with over 90% accuracy across several large-scale dynamic graph settings without external tools, significantly outperforms seven competitive baselines. Furthermore, it achieves state-of-the-art accuracy on existing benchmarks and generalizes robustly to real-world datasets. The source code is available at: https://github.com/irisorchid107/AdaSTORM/.

24.
arXiv (CS.AI) 2026-06-16

Overcoming the Impedance Mismatch: A Theoretical Roadmap for Fusing Foundation Models and Knowledge Graphs

arXiv:2606.15656v1 Announce Type: new Abstract: Modern artificial intelligence remains fundamentally divided between the continuous, probabilistic spaces of Foundation Models and the discrete, deterministic structures of Knowledge Graphs. While Retrieval-Augmented Generation (RAG) attempts to connect them by serializing graph data into text, we argue this lexical bridging is merely a superficial patch. In this paper, we formalize the underlying structural and geometric friction as the Impedance Mismatch. By categorizing current neuro-symbolic integration strategies into a three-tiered hierarchy, we demonstrate that neither surface-level prompt injection nor continuous representation alignment can preserve the strict logical motifs required for reliable multi-hop reasoning. We define the specific mathematical limits, such as the Lexical Bottleneck and Topological Collapse, that show current architectures will eventually hallucinate or conflate semantic nodes. To achieve true semantic fusion, we propose a rigorous theoretical roadmap. We advocate for natively internalizing discrete symbolic structures through Structured Residual Streams, utilizing Vector Symbolic Architectures for latent sub-graph injection, and performing model updates via Orthogonal Subspace Editing. This actionable framework paves the way for models that seamlessly fuse the precision of symbolic logic with the expressivity of parametric memory.

25.
arXiv (CS.LG) 2026-06-18

Point-Cloud-Assistant Localized Statistical Channel Prediction by Tangent Gaussian Splatting

arXiv:2606.18734v1 Announce Type: cross Abstract: Accurate, site-specific channel information is crucial for optimizing next-generation wireless networks. Among various approaches, localized statistical channel modeling (LSCM), which models the channel multipath angular power spectrum (APS) from the reference signal received power (RSRP) measurement, has emerged as a state-of-the-art method tailored for efficient network optimization. However, despite its effectiveness, LSCM cannot predict APS at the vast majority of locations where no measurements are available, which significantly restricts its applicability in large-scale, real-world scenarios. To address this challenge, we present point-cloud-assisted tangent Gaussian splatting (PC-TGS), the first framework to extrapolate APS to unmeasured outdoor grids by integrating sparse radio measurements with dense LiDAR-based geometry. PC-TGS represents environmental scatterers as anisotropic 3D Gaussians, initialized and refined through a relaxed-mean reparameterization of the raw point cloud. A tangent-plane projection accurately maps each Gaussian into the local angular domain, while a depth-aware electromagnetic splatting process aggregates their contributions. To ensure practical deployment, we derive a closed-form Gaussian-weighted average (GWA) for APS bin integration and provide a provable error bound. { Evaluations on a LiDAR-scanned city-scale dataset (5M points, 6,310 RSRP samples) demonstrate that PC-TGS achieves better APS and RSRP prediction performance compared to state-of-the-art baselines and faster inference time for APS extrapolation task. These results highlight the potential of PC-TGS to enable geometry-aware and data-efficient channel prediction in large-scale wireless digital twins.