Academic Intelligence · Curated Daily

探索全球前沿学术脉络

AcademicHub 汇聚顶级期刊与预印本平台的实时文献。定制您的专属科研雷达,利用大语言模型自动生成交叉领域文献分析简报。

01.
arXiv (CS.AI) 2026-06-16

From Detection to Recovery: Operational Analysis on LLM Pre-training with 504 GPUs

arXiv:2605.09370v5 Announce Type: replace-cross Abstract: Large-scale AI training is fundamentally a distributed systems problem, where hardware failures are routine operating conditions rather than rare exceptions, yet public operational evidence from production training clusters remains limited. This report presents an empirical analysis of a 63-node NVIDIA B200 production cluster (504 GPUs), using 55 days of Prometheus time-series data and 73 days of operational logs covering 224 multi-node training sessions. The environment is cross-organizational: five parties (SKT, Upstage, Lablup, NVIDIA Korea, VAST Data) share a unified monitoring pipeline. This enabled joint diagnosis of a 60-node-scale storage I/O bottleneck absent in 2-4-node tests, a production-scale phenomenon no single team could isolate alone. We perform three quantitative analyses yielding four findings. First, over 751 Prometheus metrics and 10 XID-identified GPU failures, no single metric is consistently dominant across failure types, motivating multi-signal detection. Second, 523 checkpoint events trace the save/load path from GPU VRAM to the NFS server: restart loading reaches 21.5% of maximum read bandwidth (700 GB/s) and save bursts 16.0% of maximum write bandwidth (250 GB/s), with NFS/RPC queueing and transport-layer backlog rising together. Third, across 224 sessions over 73 days, node exclusions concentrate so the top 3 of 63 nodes account for over 50%. Fourth, auto-retry chain analysis shows a 33.3% success rate over 12 chains (73 attempts), 2.7x the 12.5% manual rate, with a median retry interval of 11 minutes (IQR 10-11). All analyses are grounded in production infrastructure providing session-level workload management, GPU-centric scheduling, and unified observability.

02.
arXiv (CS.LG) 2026-06-18

Generative models for decision-making under distributional shift

arXiv:2604.04342v2 Announce Type: replace Abstract: Many data-driven decision problems are formulated using a nominal distribution estimated from historical data, while performance is ultimately determined by a deployment distribution that may be shifted, context-dependent, partially observed, or stress-induced. This tutorial presents modern generative models, particularly flow- and score-based methods, as mathematical tools for constructing decision-relevant distributions. From an operations research perspective, their primary value lies not in unconstrained sample synthesis but in representing and transforming distributions through transport maps, velocity fields, score fields, and guided stochastic dynamics. We present a unified framework based on pushforward maps, continuity, Fokker-Planck equations, Wasserstein geometry, and optimization in probability space. Within this framework, generative models can be used to learn nominal uncertainty, construct stressed or least-favorable distributions for robustness, and produce conditional or posterior distributions under side information and partial observation. We also highlight representative theoretical guarantees, including forward-reverse convergence for iterative flow models, first-order minimax analysis in transport-map space, and error-transfer bounds for posterior sampling with generative priors. The tutorial provides a principled introduction to using generative models for scenario generation, robust decision-making, uncertainty quantification, and related problems under distributional shift.

03.
arXiv (CS.CV) 2026-06-16

Instance-Aware Knowledge Distillation for Semi-Supervised Learning of an On-Board Multi-Task Dense Prediction Model for Collision Avoidance System

Collision avoidance systems have evolved toward camera-based deep learning approaches for driving scene understanding. However, deployment in edge environments such as country clubs is constrained by limited computational resources and unreliable communication infrastructure. Moreover, constructing large-scale datasets for the target domain involves substantial annotation cost. To address these limitations, we propose an instance-aware knowledge distillation framework for semi-supervised learning. Specifically, we generate pseudo labels that mitigate teacher bias by leveraging domain priors from the teacher and instance-centric knowledge from foundation models. The trained lightweight student is deployed in the proposed collision avoidance system and performs multiple dense prediction tasks in real-time. The system detects frontal obstacles and encodes their spatial information into controller area network messages for automated guided vehicle operation. To achieve this, we construct a large-scale country club dataset and perform field validation of the proposed system. Experimental results demonstrate that the student outperforms the large teacher in instance segmentation while mitigating performance degradation in monocular depth estimation. Compared with the teacher, the student reduces FLOPs by 22.68$\times$ and parameters by 14.33$\times$, achieving 6.46 FPS on a low-cost edge device.

04.
arXiv (CS.AI) 2026-06-16

EMS: Multi-Agent Voting via Efficient Majority-then-Stopping

arXiv:2604.02863v2 Announce Type: replace Abstract: Majority voting is the standard for aggregating multi-agent responses into a final decision. However, traditional methods typically require all agents to complete their reasoning before aggregation begins, leading to significant computational overhead, as many responses become redundant once a majority consensus is achieved. In this work, we formulate efficient multi-agent voting as a reliability-aware agent scheduling problem and propose Efficient Majority-then-Stopping (EMS) to improve reasoning efficiency. EMS first estimates a Task-Conditioned Reliability Ordering (TCRO) for each agent by retrieving its historical consensus evidence on semantically similar queries, and then invoking agents in descending reliability order. Next, Adaptive Incremental Voting (AIV) terminates the process once the current leading answer cannot be overturned by any possible votes from the remaining agents, and returns this answer. Finally, Reliability History Updating (RHU) updates only the invoked agents according to their consensus with the final decision. Extensive evaluations across five benchmarks show that EMS preserves the accuracy of Majority Voting while reducing the average number of invoked agents by 35% and token consumption by 44%, respectively. The code is available at https://github.com/fuyu66/EMS.

05.
arXiv (CS.AI) 2026-06-16

Beyond Case Law: Evaluating Structure-Aware Retrieval and Safety in Statute-Centric Legal QA

arXiv:2604.06173v2 Announce Type: replace-cross Abstract: Legal QA benchmarks have predominantly focused on case law, overlooking the unique challenges of statute-centric regulatory reasoning. In statutory domains, relevant evidence is distributed across hierarchically linked documents, creating a statutory retrieval gap where conventional retrievers fail and models often hallucinate under incomplete context. We introduce SearchFireSafety, a structure- and safety-aware benchmark for statute-centric legal QA. Instantiated on fire-safety regulations as a representative case, the benchmark evaluates whether models can retrieve hierarchically fragmented evidence and safely abstain when statutory context is insufficient. SearchFireSafety adopts a dual-source evaluation framework combining real-world questions that require citation-aware retrieval and synthetic partial-context scenarios that stress-test hallucination and refusal behavior. Experiments across multiple large language models show that graph-guided retrieval substantially improves performance, but also reveal a critical safety trade-off: domain-adapted models are more likely to hallucinate when key statutory evidence is missing. Our findings highlight the need for benchmarks that jointly evaluate hierarchical retrieval and model safety in statute-centric regulatory settings.

06.
arXiv (CS.LG) 2026-06-15

Lower Complexity Bounds for Nonconvex-Strongly-Convex Bilevel Optimization with First-Order Oracles

作者:

arXiv:2511.19656v3 Announce Type: replace Abstract: Although upper bound guarantees for bilevel optimization have been widely studied, progress on lower bounds has been limited due to the complexity of the bilevel structure. In this work, we focus on the smooth nonconvex-strongly-convex setting and develop new hard instances that yield nontrivial lower bounds under deterministic and stochastic first-order oracle models. In the deterministic case, we prove that any first-order zero-respecting algorithm requires at least $\Omega(\kappa^{3/2}\epsilon^{-2})$ oracle calls to find an $\epsilon$-accurate stationary point, improving the optimal lower bounds known for single-level nonconvex optimization and for nonconvex-strongly-convex min-max problems. In the stochastic case, we show that at least $\Omega(\kappa^{5/2}\epsilon^{-4})$ stochastic oracle calls are necessary, again strengthening the best known bounds in related settings. Our results expose substantial gaps between current upper and lower bounds for bilevel optimization and suggest that even simplified regimes, such as those with quadratic lower-level objectives, warrant further investigation toward understanding the optimal complexity of bilevel optimization under standard first-order oracles.

07.
arXiv (CS.LG) 2026-06-18

Fair Online Resource Allocation

arXiv:2606.18679v1 Announce Type: cross Abstract: We study the problem of fair online resource allocation, motivated by applications such as refugee resettlement and airline scheduling, where agents arrive sequentially and must be assigned to facilities with limited capacities. We introduce a model that maximizes the overall welfare subject to resource constraints and a Lipschitz fairness requirement, which ensures that similar agents arriving in the same batch receive similar expected outcomes. We first analyze the offline problem, proving that the value of the optimal fair allocation is at least an $\Omega(1/\gamma)$ fraction of the optimal unfair allocation, where $\gamma$ is the fairness coefficient, thereby bounding the price of fairness. For the online setting, we propose an algorithm based on dual mirror descent that enforces fairness constraints within batches while estimating optimal dual variables. We prove that this algorithm achieves sublinear regret relative to the optimal offline fluid benchmark. Finally, we validate our theoretical results using real-world data from the Refugee Economies Programme, demonstrating the algorithm's performance and examining the trade-offs between welfare maximization and fairness enforcement.

08.
arXiv (CS.CV) 2026-06-12

GRIP: Feedback-Guided Prompt Retrieval for Large Multimodal Models

In-Context Learning (ICL) has become a powerful mechanism for adapting Large Language Models (LLMs) to new tasks without fine-tuning. Extending this concept to Large Multimodal Models (LMMs), Multimodal In-Context Learning (M-ICL) relies on retrieving relevant examples, such as images, captions, or question-answer pairs, to guide predictions across tasks like classification, captioning, and visual question answering (VQA). Most existing approaches select in-context examples based on feature-space similarity, assuming that semantically similar samples provide the most useful context. However, our systematic analysis reveals that this assumption does not always hold: visually similar examples are not necessarily those that most effectively enhance in-context learning performance. To address this, we propose the Guided Retrieval of In-context Prompts (GRIP), a learnable vision-only retrieval framework that leverages feedback from LMMs to identify examples that truly improve model predictions. GRIP learns to distinguish beneficial from detrimental in-context examples through contrastive training, refining retrieval beyond pure similarity. Across three multimodal tasks, namely classification, captioning, and VQA, GRIP improves consistently over similarity-based retrieval on Qwen2.5-VL-7B, with its strongest gains in classification on Idefics2-8B. Moreover, we demonstrate that retrievers trained with feedback from one open LMM can be transferred to other models without retraining, including closed-source GPT-4o and Gemini, enabling scalable and cost-efficient deployment of M-ICL. Code will be published upon acceptance.

09.
arXiv (quant-ph) 2026-06-17

Cavity-enhanced superconducting response in an underdoped cuprate

arXiv:2606.18084v1 Announce Type: cross Abstract: Superconductors carry electrical current without resistance when paired electrons condense into a coherent macroscopic quantum state. In underdoped cuprates, evidence suggests that pairing-related correlations and superconducting fluctuations can survive above the temperature at which global coherence is lost, pointing to phase fluctuations as a key limitation on superconductivity in this regime. Motivated by recent demonstrations of cavity-modified collective states in quantum materials, we investigate whether superconducting coherence can be stabilized by engineering the electromagnetic environment of the superconductor. We study an underdoped YBa$_2$Cu$_3$O$_{7-\delta}$ thin film in a tunable terahertz cavity formed with a semi-transparent gold mirror. From temperature-dependent terahertz transmission measurements, we find that the cavity enhances the superconducting response below the critical temperature, with an increase of the inferred superfluid weight. The effect becomes more pronounced at smaller cavity lengths and is accompanied by an upward shift of the superconducting onset temperature. Calculations based on a cavity-coupled model for phase-fluctuating superconductors capture these trends and support an interpretation in terms of cavity-enhanced phase stiffness. These results showcase the potential of cavity engineering for designing emergent functionalities in correlated systems.

10.
arXiv (CS.CV) 2026-06-11

AnchorEdit: Maintaining Temporal Consistency in Multi-turn Image Editing via Causal Memory

Multi-turn image editing is essential for iterative design, yet current models often struggle with identity drift and error accumulation over successive steps. While existing research leverages video priors for consistency, their reliance on bidirectional attention is fundamentally misaligned with the causal, sequential nature of interactive editing. In this paper, we propose AnchorEdit, the first autoregressive (AR) diffusion-based framework designed specifically for high-resolution, long-term multi-turn editing. AnchorEdit bridges the gap between video priors and causal inference through a three-stage training curriculum: identity-preserving sing-turn pretraining, causal AR forcing fine-tuning with a novel self-rollout strategy to mitigate exposure bias, and consistency distillation for efficient 4-step generation. During inference, we introduce a memory mechanism to anchor the initial subject identity and ensure stable extrapolation across extended editing trajectories. To evaluate performance, we provide a new high-resolution multi-turn editing benchmark designed to stress-test long-horizon stability. Extensive experiments demonstrate that AnchorEdit achieves state-of-the-art results, maintaining exceptional subject fidelity and instruction following even over 10+ interaction rounds.

11.
arXiv (CS.LG) 2026-06-16

Descriptive versus Regulatory Uncertainty in Bounded Predictive Systems

arXiv:2605.18909v2 Announce Type: replace Abstract: Any system that models the world under finite representational capacity must compress; any compression entails a prior; and the prior is the system's bias. What has not been established is whether uncertainty participates in the dynamics governing future behavior, or merely describes the output distribution without consequence. We introduce a structural distinction between descriptive uncertainty, which does not recursively modulate the system's policy, and regulatory uncertainty, which directly enters the optimization landscape and drives persistent adaptive restructuring. We prove formally that current transformer architectures are confined to descriptive uncertainty at inference. We ground this in thermodynamics via Landauer's principle: for uncertainty to be regulatory, epistemic error must cost real energy; in a decoupled system, hallucinations and correct derivations dissipate identical energy. We test this empirically across three locally-deployed language models (3B, 8B, 70B parameters). Token-level Shannon entropy is statistically invariant across tasks spanning pattern retrieval, causal operator application, and out-of-distribution causal generalization in all three models (all pairwise p >= 0.568; within-model ranges 0.011-0.028 nats), while task accuracy varies substantially across the same conditions (0%-100%). Entropy and accuracy are orthogonal. The decoupling is scale-invariant: larger models achieve higher accuracy but identical entropy flatness. This structural incapacity is not resolvable by additional parameters or training data. Genuine epistemic grounding requires physical coupling between thermodynamic substrate state and information processing cost.

12.
arXiv (CS.CL) 2026-06-18

FLiP: Towards understanding and interpreting multimodal multilingual sentence embeddings

This paper presents factorized linear projection (FLiP) models for understanding pretrained sentence embedding spaces. We train FLiP models to recover the lexical content from multilingual (LaBSE), multimodal (SONAR) and API-based (Gemini) sentence embedding spaces in several high- and mid-resource languages. We show that FLiP can recall more than 75% of lexical content from the embeddings, significantly outperforming existing non-factorized baselines. Using this as a diagnostic tool, we uncover the modality and language biases across the selected sentence encoders and provide practitioners with intrinsic insights about the encoders without relying on conventional downstream evaluation tasks. Our implementation is public https://github.com/BUTSpeechFIT/FLiP.

13.
arXiv (CS.LG) 2026-06-16

Phase-Localized Curation Does Not Help: A Negative Result on Per-Phase Metric Selection for Demonstration Filtering

作者:

arXiv:2606.15064v1 Announce Type: new Abstract: Manipulation demonstrations have temporal phase structure, and a natural hypothesis is that demonstration-curation metrics should be applied within phases rather than globally. The idea is to segment each trajectory into phases, score each phase with the metric that is locally most informative, and then aggregate. This follows directly from prior work showing that a single global metric can be the best detector of a defect and yet the worst curator of the resulting policy. We test the per-phase hypothesis on three contact-rich LIBERO pick-and-place tasks with a controlled early-release structural defect, comparing phase-gated curation against the same metrics applied uniformly and against a strong single global metric. Across all three tasks and five random seeds per condition, phase-gated curation is never the best curation strategy, and it is the worst of the three on two of the three tasks (Task 1: 86.0 vs. 92.0 for global; Task 3: 22.7 vs. 48.0 for uniform). We trace the failure to a concrete mechanism. When the defect signal is concentrated in a single phase, rank-aggregating across phases dilutes that signal with uninformative scores from defect-free phases, selecting a worse demonstration subset than simply applying the defect-informative metric everywhere. We further show that the per-phase metric selection does not transfer across tasks, since no phase shares a winning metric between any two tasks, so the selection cannot be reused and must be re-derived per task from a noisy sweep. These results bound a plausible and previously untested method, and they argue that practitioners should prefer identifying a single defect-informative metric over decomposing curation by phase. We release the full pipeline, all metric implementations, and per-seed results.

14.
arXiv (CS.CV) 2026-06-17

CIAN: Multi-Stage Framework for Event-Enriched Image Captioning via Retrieval-Augmented Generation

Event-enriched image captioning describes not only visible content but also the broader context of events, including timing, location, and participants, capabilities missing in most pixel-bound models. We propose the Contextual Image-Article Narrator (CIAN), a multi-stage framework that enriches captions with external narratives. CIAN retrieves relevant articles using SigLIP, summarizes them to guide a Narrative Generation stage with a LoRA-fine-tuned Qwen model, and applies N-Gram-based Refinement for fluency and coherence. On the OpenEvents-V1 benchmark, CIAN achieves high retrieval performance (mAP 0.979) and improves caption quality, increasing CIDEr from 0.030 to 0.094. These results highlight the effectiveness of retrieval-augmented reasoning combined with linguistic refinement for generating context-aware, human-like captions.

15.
arXiv (CS.LG) 2026-06-17

Adaptable Method for Crystal Design across Diverse Constraints and Objectives with Pretrained Property Predictors

arXiv:2410.08562v5 Announce Type: replace-cross Abstract: Advanced crystal design can accelerate materials discovery across applications from photovoltaics to spintronics. Practical design must satisfy multiple properties and physical constraints, yet existing machine-learning-based approaches to such design often depend on large datasets, retraining, or task-specific generators. Here, we show that direct predictor-guided gradient optimization enables data-efficient, constraint-rich crystal design by combining off-the-shelf predictors with site-wise element masks, template initialization, and task-specific losses. In perovskites, it outperformed generative and Bayesian baselines under three targets – band gap, formation energy, and tolerance factor – and two hard constraints. DFT assessment further showed band-gap targeting competitive with a leading generative model despite using predictors trained on roughly one-tenth of the data. By flexibly combining pretrained predictors with application-oriented masks and custom losses, the same framework supported half-metal design. Such modularity could help researchers and engineers translate diverse application requirements directly into optimized candidate crystals with minimal computational cost.

16.
arXiv (CS.LG) 2026-06-18

A physical adaptive material motor unit neural network: a hygromorph composite material machine

arXiv:2606.18275v1 Announce Type: cross Abstract: Advances in novel materials science enable structures to function as intelligent machines by embedding memory and learning capabilities directly into materials. Our work introduces a physical adaptive material motor unit neural network,leveraging a new generation of controllable actuators composed of wood- and carbon black-based composites, sensitive to temperature and relative humidity. These material actuators are assembled into a motor unit-like structure inspired by muscle contraction trigger, forming an intelligent machine capable of dynamic shading control that can be used, for example, in buildings. The machine is governed by a neural network trained on over 350 experimental data points collected under diverse environmental conditions. By establishing a new data-aware backpropagation training, we show that the machine predicts shading responses and learns to predict appropriate behaviour incrementally as the database expands. We also demonstrate the ability of the machine to optimise configurations to achieve similar shading outputs under two distinct conditions.

17.
arXiv (CS.CL) 2026-06-17

OpenLID-v3: Improving the Precision of Closely Related Language Identification – An Experience Report

Language identification (LID) is an essential step in building high-quality multilingual datasets from web data. Existing LID tools (such as OpenLID or GlotLID) often struggle to identify closely related languages and to distinguish valid natural language from noise, which contaminates language-specific subsets, especially for low-resource languages. In this work we extend the OpenLID classifier by adding more training data, merging problematic language variant clusters, and introducing a special label for marking noise. We call this extended system OpenLID-v3 and evaluate it against GlotLID on multiple benchmarks. During development, we focus on three groups of closely related languages (Bosnian, Croatian, and Serbian; Romance varieties of Northern Italy and Southern France; and Scandinavian languages) and contribute new evaluation datasets where existing ones are inadequate. We find that ensemble approaches improve precision but also substantially reduce coverage for low-resource languages. OpenLID-v3 is available on https://huggingface.co/HPLT/OpenLID-v3.

18.
arXiv (CS.LG) 2026-06-16

Machine Learning-Driven Chemical Reactor Network Modeling of the Sandia-D Flame

arXiv:2606.14729v1 Announce Type: cross Abstract: Turbulent combustion simulations are crucial for many scientific and engineering systems. However, the high cost to fully resolve the complex multiscale and multiphysics behavior makes direct simulation typically infeasible. The equivalent reactor network (ERN) approach attempts to improve computational efficiency by replacing a multidimensional turbulent simulation with a series of much cheaper 0-D and 1-D chemical reactors, providing a surrogate model that retains detailed chemistry at the cost of simplified flow physics. However, their development remains a challenge, often requiring either expert analysis, or automated approaches that sacrifice accuracy. In this work, we develop an automated machine-learning-assisted framework for constructing ERNs of the Sandia-D turbulent methane/air flame. Principal component analysis is first used to reduce high-dimensional thermochemical computational fluid dynamics (CFD) data to a low-dimensional latent space, where k-means clustering identifies physically interpretable flame regions used to initialize a reactor-network graph. This initialization is then refined using finite-difference gradient descent wrapped around non-differentiable Cantera reactor simulations. Across 30 RANS simulations spanning a range of pilot temperatures and inlet methane compositions, the optimized 7-reactor ERN achieves a maximum-temperature $R^2$ score of 0.7945 while preserving a $\sim6000\times$ speedup over the CFD solver. Outlet CO prediction remains more challenging, with a final $R^2$ score of $-0.4183$, but improves substantially from the unoptimized clustering initialization. These results show that unsupervised thermochemical feature extraction can provide effective physics-informed initializations for ERN construction, while gradient-based refinement can significantly improve predictive accuracy without manual reactor-network design.

19.
arXiv (CS.AI) 2026-06-12

Multi-Agent Reinforcement Learning from Delayed Marketplace Feedback for Objective-Weight Adaptation in Three-Sided Dispatch

arXiv:2606.13604v1 Announce Type: new Abstract: Dispatch in three-sided marketplaces provides a natural setting for reinforcement learning from world feedback: decisions are evaluated by delayed operational outcomes such as delivery speed, courier utilization, and merchant congestion. We present a deployed reinforcement learning system at DoorDash that adapts dispatch objective weights in a large-scale food-delivery marketplace using delayed signals. Rather than replacing the combinatorial assignment optimizer, a store-level policy learned from logged marketplace data selects a discrete multiplier that shifts the dispatch optimizer's tradeoff between delivery quality and batching efficiency. This interface enables offline policy learning under noisy, delayed, and coupled feedback while preserving production feasibility constraints and operational safeguards. We train a shared value function using centralized offline data and decentralized store-level execution, with Double Q-learning targets and a conservative regularizer to reduce out-of-distribution value overestimation. In a production switchback experiment, the offline-trained policy increases batching and reduces courier-side time costs without degrading customer-facing delivery quality. Results illustrate how world feedback from a live economic and logistics system can be used to safely adapt decision policies online.

20.
arXiv (CS.LG) 2026-06-17

Another Look at Log-PCA for Probability Measures: A Dynamical Formulation and Statistical Convergence

arXiv:2606.17196v1 Announce Type: cross Abstract: This paper is concerned with learning principal variations of random probability measures on $\mathbb{R}^m$ under the Wasserstein geometry. We introduce a new dynamical formulation to interpret the log-PCA, a linearized principal geodesic analysis, as a variational approach. Our differentiable version, termed as the Wasserstein Tangential PCA (WT-PCA), captures the local principal modes of geodesic variations of a (weighted) probability measure on the Wasserstein space via its covariance operator at barycenter. Based on the dynamical perspective and leveraging parallel transport structure of the optimal transport problems, we derive a general statistical convergence rate of the empirical WT-PCA when estimated from data in terms of the 2-Wasserstein distance between the population and empirical barycenter reference measures.

21.
arXiv (CS.CV) 2026-06-12

VideoMDM: Towards 3D Human Motion Generation From 2D Supervision

We introduce VideoMDM, a diffusion-based framework that trains 3D human motion priors directly from accurate 2D poses extracted from monocular videos, without any 3D ground truth. A pretrained 2D-to-3D lifter provides approximate 3D pose sequences that serve as a noisy teacher: these are diffused, denoised by the model in 3D, and supervised in 2D by reprojecting the prediction and comparing against accurate keypoints. We show that, under mild assumptions, a depth-weighted 2D reprojection loss is equivalent in expectation to direct 3D supervision, and we adapt standard 3D motion regularizers - velocity consistency and over-parameterized representation alignment - to this 2D setting. Unlike methods that lift 2D to 3D only at inference, VideoMDM learns a coherent 3D motion manifold during training. On HumanML3D it nearly closes the gap to fully 3D-supervised MDM (FID 0.88 vs 0.54); On real video datasets Fit3D and NBA the method learns to generate motions consistently preferred by humans, with strong quantitative results.

22.
arXiv (CS.CL) 2026-06-11

Layer-Isolated Evaluation: Gating the Deterministic Scaffold of a Production LLM Agent with a No-LLM, Regression-Locked Test Harness

End-to-end task-success is the dominant way to evaluate LLM agents, but one aggregate number tells you that an agent regressed, not where. We present layer-isolated evaluation: a deployed ordering agent is decomposed into a fixed taxonomy of layers (ontology, intent, routing, decomposition, escalation, safety, memory, and cross-cutting envelope/defense), each exercised by its own assertion slice in a deterministic, no-LLM "pure" mode. The pure suite (238 cases across 23 slices; 225 run in 2.39 s, ~10 ms/case) runs in CI on every change against a locked per-slice baseline. We validate by controlled regression injection, degrading one layer at a time across seven non-safety layers. The effect we did not design in is masking: the aggregate pass-rate barely moves (-1.7 to -5.9 pp for six local regressions), while the matching slice craters (-25 to -91 pp). A layer's slice reacting to its own fault is partly by construction; the measured results are (i) the aggregate masking and (ii) that damage stays off the other slices: the injected layer's slice is the single worst-hit in 5 of 7 cases and top-3 in 7 of 7 (mean rank 1.29 of 19). Localization replicates on a second, structurally different tenant (Starbucks SG): all seven matching slices crater, so it is not a single-catalog artifact. We position it as a concrete, deterministic instantiation of the component-level evaluation EDDOps prescribes but leaves unimplemented, with CheckList as ancestor and as the deterministic mirror image of whole-workflow stochastic mutation testing. Our contributions: (a) a fully decomposed, sub-second, no-LLM per-layer harness for a production agent, (b) a coverage-honesty test-adequacy criterion that refuses to score an unexercised layer, and (c) the regression-injection demonstration that per-slice baseline-locked gates localize regressions an aggregate metric masks.

23.
arXiv (quant-ph) 2026-06-17

Quantum mechanics in configuration space in context

arXiv:2606.17622v1 Announce Type: new Abstract: To enhance the way in which wave-particle duality is implemented in the modelling of quantum mechanical systems, Bukhari et al. [New J. Phys. 27, 084501 (2025)] recently introduced an alternative approach to quantum mechanics, namely quantum mechanics in configuration space. This formalism is based on a physically motivated quantisation of Newtonian mechanics and promotes the classical position-velocity states (x,v) to pairwise distinguishable quantum states. The resulting |x,v> states form the basis of the Hilbert space of individual quantum mechanical particles and evolve along classical trajectories. In this paper, we consider the modelling of a mechanical particle in free space and put quantum mechanics in configuration space into context. It is shown that this formalism increases the continuity between quantum and classical mechanics by avoiding a conceptual inconsistency associated with the definition of momentum in canonical quantisation. In addition, we emphasise that standard quantum mechanics and quantum mechanics in configuration space are based on two distinct formulations of classical mechanics.

24.
arXiv (quant-ph) 2026-06-11

A Cryogenic Uniaxial Strain Cell for Quantum Devices

arXiv:2606.11485v1 Announce Type: new Abstract: Mechanical strain is a powerful resource for tuning quantum systems, but existing piezoelectric strain cells are generally optimized for fragile, high-aspect-ratio single crystals rather than the thick, square-profile chips typical of semiconductor quantum devices. Furthermore, adapting these cells for qubits requires accommodating dense RF and DC wiring while maintaining strict electrical isolation from high-voltage piezo actuators. Here, we present a piezoelectric uniaxial strain cell designed to homogeneously strain thick, square-profile substrates. We introduce a highly symmetric dual-chip loading configuration that effectively suppresses flexural deformation and shear stress. The cell integrates a high-density RF/DC interposer to support standard wire bonding and encloses the actuators in a grounded Faraday cage to prevent unwanted Stark shifts in the device layer. Finite element simulations confirm that combining stiff actuators with this symmetric mounting drastically improves strain homogeneity. Finally, we validate the apparatus experimentally by applying uniaxial strain to a 200 $\mu$m thick silicon die. Surface strain measurements demonstrate an applied strain of 215 $\mu\epsilon$ for 200 V applied piezo bias.

25.
arXiv (CS.AI) 2026-06-17

Embedded Machine Learning for Microcontroller-Class Edge Devices: Data, Feature, Evaluation, and Deployment Pipelines

arXiv:2606.18122v1 Announce Type: cross Abstract: Embedded machine learning moves inference from cloud services to resource-constrained devices that must acquire data, preprocess signals, run a model, and act within tight limits on memory, energy, and latency. This paper presents a systems-oriented synthesis of an embedded machine-learning workflow for microcontroller-class platforms. The emphasis is placed on engineering decisions that are often hidden in generic machine-learning introductions: sampling and buffering, feature extraction as dimensionality reduction, validation under class imbalance, model/runtime co-design, and streaming deployment. Two representative signal families are used throughout the paper. The first is inertial motion recognition, where a two-second, three-axis accelerometer window is transformed from raw samples into root-mean-square and spectral features before classification. The second is keyword spotting, where audio is sampled, anti-aliased, transformed into mel-frequency cepstral coefficients, and processed by a compact one-dimensional convolutional network. The paper concludes with practical design rules for robust on-device inference, including data curation, quantization, thresholding, scheduling, and field monitoring.