Academic Intelligence · Curated Daily

探索全球前沿学术脉络

AcademicHub 汇聚顶级期刊与预印本平台的实时文献。定制您的专属科研雷达,利用大语言模型自动生成交叉领域文献分析简报。

01.
arXiv (CS.LG) 2026-06-11

A Data-Centric Framework for Detecting and Correcting Corrupted Labels

arXiv:2606.11699v1 Announce Type: new Abstract: The performance of machine learning and deep learning models largely depends on the quality of the training data. However, the quality of the real-world datasets is often compromised by noisy labels, which can substantially degrade model accuracy and reliability. To address this challenge, we propose Relabeler, an end-to-end data-centric framework for detecting and correcting corrupted labels. For corrupted label detection, Relabeler jointly leverages both local and global relationships among data instances to identify potentially noisy samples. After detecting suspicious instances, Relabeler further performs label correction by estimating the most probable clean label for each instance based on both its input features and observed noisy label. Extensive experiments across multiple datasets, noise types, and noise rates demonstrate that Relabeler consistently outperforms state-of-the-art baselines, achieving up to 58% improvement in label correction precision and 6% improvement in downstream task performance.

02.
arXiv (CS.CV) 2026-06-17

TerraTransfer: Learning End-to-End Driving Policies Without Expert Demonstrations

End-to-end autonomous driving has achieved state-of-the-art performance on benchmarks and real-world deployments. Its standard training recipe, however, is expensive across all stages: collecting and labeling millions of driving frames is costly, and closed-loop RL on images is bottlenecked by the per-step cost of photorealistic rendering plus a forward pass through a large vision backbone. Self-play in vectorized simulators changes the economics: millions of rollout steps per second, and a state distribution naturally rich in collisions, near-misses, and recoveries that no driving log contains. Our approach exploits this asymmetry by decoupling learning to drive from learning to see. We pretrain a single policy by self-play, then align its latent space with a pretrained vision backbone, through the action KL divergence and a batch-relational low-rank structural loss. The action target comes from the self-play policy, so alignment never supervises against a logged trajectory: a paired dataset of (image, scene-state) frames suffices, with no need for the curated expert demonstrations that imitation pretraining is built on. On photorealistic 3D Gaussian splatting closed-loop scenarios, the resulting end-to-end policy matches or exceeds prior end-to-end methods.

03.
arXiv (CS.LG) 2026-06-16

Enhancing Physics-Informed Neural Networks Through Feature Engineering

arXiv:2502.07209v4 Announce Type: replace Abstract: Physics-Informed Neural Networks (PINNs) seek to solve partial differential equations (PDEs) with deep learning. Mainstream approaches that deploy fully-connected multi-layer deep learning architectures require prolonged training to achieve even moderate accuracy, while recent work on feature engineering allows higher accuracy and faster convergence. This paper introduces SAFE-NET, a Single-layered Adaptive Feature Engineering NETwork that achieves orders-of-magnitude lower errors with far fewer parameters than baseline feature engineering methods. SAFE-NET returns to basic ideas in machine learning, using Fourier features, a simplified single hidden layer network architecture, and an effective optimizer that improves the conditioning of the PINN optimization problem. Numerical results show that SAFE-NET converges faster and typically outperforms deeper networks and more complex architectures. It consistently uses fewer parameters – on average, 65% fewer than the competing feature engineering methods – while achieving comparable accuracy in less than 30% of the training epochs. Moreover, each SAFE-NET epoch is 95% faster than those of competing feature engineering approaches. These findings challenge the prevailing belief that modern PINNs effectively learn features in these scientific applications and highlight the efficiency gains possible through feature engineering.

04.
arXiv (CS.LG) 2026-06-19

BLISS: A Lightweight Bilevel Influence Scoring Method for Data Selection in Language Model Pretraining

arXiv:2510.06048v5 Announce Type: replace Abstract: Effective data selection is essential for pretraining large language models (LLMs), enhancing efficiency and improving generalization to downstream tasks. However, existing approaches often require leveraging external pretrained models, making it difficult to disentangle the effects of data selection from those of the external pretrained models. In addition, they often overlook the long-term impact of selected data if the model is trained to convergence, primarily due to the prohibitive cost of full-scale LLM pretraining. In this paper, we introduce BLISS (BileveL Influence Scoring method for data Selection): a lightweight data selection method that operates entirely from scratch, without relying on any external pretrained oracle models, while explicitly accounting for the long-term impact of selected data. BLISS leverages a small proxy model as a surrogate for the LLM and employs a score model to estimate the long-term influence of training samples if the proxy model is trained to convergence. We formulate data selection as a bilevel optimization problem, where the upper-level objective optimizes the score model to assign importance weights to training samples, ensuring that minimizing the lower-level objective (i.e., training the proxy model over the weighted training loss until convergence) leads to best validation performance. Once optimized, the trained score model predicts influence scores for the dataset, enabling efficient selection of high-quality samples for LLM pretraining. We validate BLISS by pretraining 410M/1B/2.8B Pythia and LLaMA-0.5B models on selected subsets of the C4 dataset. Notably, under the 1B model setting, BLISS achieves $1.7\times$ speedup in reaching the same performance as the state-of-the-art method, demonstrating superior performance across multiple downstream tasks.

05.
arXiv (CS.CV) 2026-06-16

Sinkhorn-CPD: Robust point cloud registration via unbalanced entropic optimal transport

Coherent Point Drift (CPD) is widely used for rigid point cloud registration because of its soft correspondences and closed-form parameter updates. However, CPD's target-side marginal constraint forces every observation, including outliers, to receive exactly unit probability mass. This assumption degrades registration accuracy under heavy outliers and partial overlap. Optimal transport (OT) methods can handle missing mass through unbalanced formulations, but require hand-tuned annealing schedules. In this paper, we propose Sinkhorn-CPD, which replaces CPD's target-side marginal constraint with dual Kullback-Leibler penalties, allowing the algorithm to discard outliers on both sides. The resulting formulation is a fully unbalanced entropic optimal transport problem, which can be efficiently solved by generalized Sinkhorn iterations. Moreover, Sinkhorn-CPD preserves the closed-form Procrustes and variance updates of CPD. In our method, the variance sigma^2 plays the role of the entropic regularization parameter, which induces an automatic annealing schedule from diffuse to sharp correspondences without manual temperature tuning. Experiments on synthetic, cross-category, and scan-to-CAD benchmarks show that Sinkhorn-CPD achieves state-of-the-art accuracy, with strong robustness to outliers and partial overlap.

06.
arXiv (quant-ph) 2026-06-16

Enhancing Quantum Machine Learning with Anyons

arXiv:2606.16090v1 Announce Type: new Abstract: The power of quantum computing and quantum machine learning relies on harnessing uniquely quantum phenomena as computational resources. While superposition, coherence and entanglement have been central to this effort, the role of particle exchange statistics remains largely unexplored. Here, we introduce a quantum kernel framework that unifies bosonic, fermionic, and anyonic (fractional) exchange statistics within a single learning paradigm. We study this family of kernels from three perspectives. At the representation level, Haar-averaged effective-dimension analysis shows that fractional exchange phases access feature-space directions inaccessible to the purely symmetric or antisymmetric limits. At the level of kernel geometry, the corresponding Gram matrices show greater separation from the distinguishable-particle baseline and reduced label-dependent model complexity. Finally, on learning benchmarks, anyonic kernels consistently outperform their bosonic and fermionic counterparts, with stronger target alignment and more favorable class geometry. Together, these findings show that exchange statistics reshape the structure and geometry of quantum feature space, leading to enhanced learning performance. Our work identifies particle exchange statistics as an overlooked computational ingredient for quantum machine learning and provides the first systematic comparison of quantum learning models across exchange phases.

07.
arXiv (math.PR) 2026-06-17

Analysis of the asymmetric shelf shuffle

arXiv:2606.18047v1 Announce Type: new Abstract: In an asymmetric shelf shuffle, a deck of $n$ cards is dealt sequentially from the bottom and assigned one of the $m$ shelves uniformly at random. The card is placed at the top of the assigned shelf with probability $p$, and at the bottom of the assigned shelf with probability $(1-p)$. Analysis of the shelf shuffle has gained much attention recently, and the case $p=1/2$ was first treated by Diaconis–Fulman–Holmes [Ann. Appl. Prob. 23 (2013), no. 4, 1692–1720]. In this paper, we extend the analysis of the shelf shuffle to general $p\in (0, 1)$. In particular, we study the distribution of cycles, cycle lengths, number of descents, number of valleys, number of inversions, and the RSK shape of a permutation obtained from an asymmetric shelf shuffle. Our results extend the analysis of Diaconis–Fulman–Holmes to arbitrary $p$. Furthermore, our analysis of the distribution of descents and inversions is new even for $p=1/2$.

08.
arXiv (CS.LG) 2026-06-18

Be Your Own Teacher: Steering Protein Language Models via Unsupervised Reward Optimization

arXiv:2606.18961v1 Announce Type: new Abstract: Protein language models (PLMs) have emerged as powerful tools for controllable biomolecular design, yet their post-training adaptation typically relies on costly wet-lab validation or curated preference datasets. To overcome this supervision bottleneck, we introduce unsupervised reward optimization of PLMs, a comprehensive framework for steerable protein generation without ground-truth labels. Our key insight is that task-agnostic rewards, which combine intrinsic model uncertainty with extrinsic semantic consistency informed by protein representation models, exhibit strong correlation with controllability measures across base models and temperature regimes. Building upon this discovery, we propose two offline algorithms: Soft Reward Optimization (SRO) and Binarized Reward Optimization (BRO), which effectively maximize the classical RLHF objective induced by these proxy rewards. Extensive experiments on compositional out-of-distribution prompts demonstrate that both methods significantly outperform competitive baselines (DPO, KTO), while approaching oracle performance across multiple sampling temperatures, model scales and protein families. Moreover, PLMs fine-tuned with unsupervised rewards can achieve consistently higher coverage compared to their base model in pass@k evaluations. By enabling self-improvement of PLMs through their own generated experience, our framework provides a scalable pathway toward controllable biomolecular design in settings where labeled preferences or experimental feedback are scarce or unavailable.

09.
arXiv (math.PR) 2026-06-16

Risk or Replace: Efficient Asymptotics for Data-Driven Maintenance

arXiv:2606.14706v1 Announce Type: cross Abstract: Condition-based maintenance (CBM) is an approach that plans interventions for deteriorating systems according to their observed operational state. CBM reduces unplanned downtime and extends usable lifetime. We study a heterogeneous population of components that degrade over time according to a stochastic processes with non-negative and i.i.d. increments that are characterized by component-specific parameters that remain unobservable to the decision maker. We rely on degradation data to estimate these parameters and determine replacement actions at equidistant epochs. The goal is to minimize the long-run average cost, which incorporates fixed replacement costs, failure costs, and operating costs. This problem can be formulated as a high-dimensional partially observable Markov decision process (POMDP), which is generally intractable. We develop a tractable, data-driven CBM policy that estimates the optimal policy of a hypothetical Oracle that has full information of the underlying degradation parameters and call this policy the Estimated Oracle's Optimal Policy (EOP). We introduce a scaling regime where both the failure thresholds and cost parameters increase proportionally, reflecting practical settings in which component lifetimes and maintenance costs are large relative to the time between two consecutive CBM decision moments. We show that the regret of the EOP, defined as the difference between its long-run average cost and that of the Oracle, converges to zero in the scaling regime when the parameter estimator is consistent. Across extensive experiments using both real and simulated data, the EOP achieves very low regret and, whenever the optimal POMDP policy can be computed exactly, a negligible optimality gap.

10.
arXiv (quant-ph) 2026-06-11

Quantum Entanglement, Stratified Spaces, and Topological Matter: Towards Entanglement-Sensitive Langlands Data

arXiv:2601.13467v2 Announce Type: replace Abstract: Using the spinless Haldane model, we study the witness-filtered Berry curvature, quantum geometric tensor, and quantum Fisher information on the gapped strata of the parameter space and evaluate them through the Fukui-Hatsugai-Suzuki discretization. The filtered quantities isolate the part of the geometric response carried by sublattice coherence: they suppress contributions from regions where the occupied Bloch state is locally A/B-separable and emphasize regions where curvature and coherence coexist. We derive exact lattice identities, reconstruction formulas for the curvature-weighted coherence, and bounds relating the filtered quantum geometric tensor and quantum Fisher information to single-particle mode entanglement. Across the gap-closing stratum, the quantized response changes admit a natural description in terms of Hecke modifications. We elicit a corresponding Langlands viewpoint – not as a full correspondence, but as an organizational principle and as the mathematical shadow of these physical geometric constructions.

11.
arXiv (CS.LG) 2026-06-15

MAD: Manifold Attracted Diffusion

arXiv:2509.24710v3 Announce Type: replace-cross Abstract: Score-based diffusion models are a highly effective method for generating samples from a distribution of images. We consider scenarios where the training data comes from a noisy version of the target distribution, and present an efficiently implementable modification of the inference procedure to generate noiseless samples. Our approach is motivated by the manifold hypothesis, according to which meaningful data is concentrated around some low-dimensional manifold of a high-dimensional ambient space. The central idea is that noise manifests as low magnitude variation in off-manifold directions in contrast to the relevant variation of the desired distribution which is mostly confined to on-manifold directions. We introduce the notion of an extended score and show that, in a simplified setting, it can be used to reduce small variations to zero, while leaving large variations mostly unchanged. We describe how its approximation can be computed efficiently from an approximation to the standard score and demonstrate its efficacy on toy problems, synthetic data, and real data.

12.
arXiv (CS.LG) 2026-06-11

Why Depth Matters in Parallelizable Sequence Models: A Lie Algebraic View

arXiv:2603.05573v2 Announce Type: replace Abstract: Scalable sequence models, such as Transformer variants and structured state-space models, often trade expressivity power for sequence-level parallelism, which enables efficient training. Here we examine the bounds on error and how error scales when models operate outside of their expressivity regimes using a Lie-algebraic control perspective. Our theory formulates a correspondence between the depth of a sequence model and the tower of Lie algebra extensions. Echoing recent theoretical studies, we characterize the Lie-algebraic class of constant-depth sequence models and their corresponding expressivity bounds. Furthermore, we analytically derive an approximation error bound and show that error diminishes exponentially as the depth increases, consistent with the strong empirical performance of these models. We validate our theoretical predictions using experiments on symbolic word and continuous-valued state-tracking problems.

13.
arXiv (CS.CV) 2026-06-11

Multi-View In-Cabin Monitoring System for Public Transport Vehicles

We introduce a multi-view in-cabin monitoring dataset for public transportation with synchronized RGB and depth images from four inward-facing cameras and a rotating LiDAR covering the vehicle interior of a digitalized and partly automated German city bus. The dataset contains 9.136 synchronized samples with annotations and is accompanied by a calibration and pseudo-labeling pipeline that generates 3D human pose estimates and oriented 3D bounding boxes for occupants. We further provide a nuScenes-format conversion and benchmark representative multi-view 3D detection models (e.g., Lift-Splat-Shoot and BEVFusion), supporting comparative evaluation and small-scale training of multi-view in-cabin perception models. The dataset and tools are available at https://github.com/EvgenyGorelik/multiview_incabin_dataset.

14.
arXiv (quant-ph) 2026-06-19

Frequency-Multiplexed Millimeter-Wave Fault-Tolerant Superconducting Qubits Enabled by an On-Chip Nonreciprocal Control Bus

arXiv:2512.17588v2 Announce Type: replace Abstract: Scaling superconducting quantum processors is fundamentally limited by the escalating complexity of cryogenic wiring and the detrimental effects of microwave crosstalk and Purcell decay. This paper proposes a novel architecture based on frequency-multiplexed millimeter-wave superconducting qubits, integrating an on-chip cryogenic nonreciprocal space-time-periodic Josephson frequency multiplier as a universal control bus. The bus replaces multiple high-frequency XY drive lines with a single low-frequency input tone, which is parametrically converted into a comb of high-order harmonics, each resonantly addressing a distinct qubit. The nonreciprocal nature of the bus provides intrinsic isolation that suppresses Purcell decay and reduces coherent crosstalk by more than $98\%$ compared to a conventional reciprocal shared drive line. Full error-budget analysis demonstrates that the architecture can maintain gate errors below the fault-tolerance threshold for arrays exceeding 25 qubits, converting a crosstalk-dominated error budget into one primarily limited by intrinsic material coherence. Theoretical modeling based on a non-Markovian master equation further indicates that the engineered environment enables information backflow, offering a pathway to enhanced coherence. This integrated, frequency-multiplexed, and nonreciprocal control bus offers a compelling route toward dramatic I/O simplification, improved noise resilience, and scalable high-coherence superconducting quantum processors.

15.
arXiv (quant-ph) 2026-06-17

SPICE-Q and Large-Scale Quantum Chip Production

arXiv:2606.17907v1 Announce Type: new Abstract: We propose SPICE-Q, a SPICE-inspired design-technology co-optimization framework for superconducting quantum processors. Rather than replacing tools such as HFSS, Qiskit Metal, pyEPR, SQcircuit, SQuADDS, scqubits, or QuTiP, SPICE-Q aims to connect them through a unified, traceable data chain spanning process rules, layout, electromagnetic simulation, energy-participation-ratio and circuit quantization, Hamiltonian extraction, noise analysis, cryogenic test, and manufacturing feedback. The central mapping is from process and PDK constraints to layout geometry, electromagnetic modes, equivalent circuit parameters, effective Hamiltonians, and finally metrics such as frequency, coupling, anharmonicity, decoherence, readout performance, and yield. This flow must capture Josephson-junction variability, transmon frequency allocation, resonator and Purcell constraints, coupler crosstalk, microwave routing, 3D interconnects, material/interface loss, package modes, and wafer-scale process statistics. By introducing standardized model interfaces, statistical parameter models, model cards, version governance, and closed-loop calibration from cryogenic and fabrication data, SPICE-Q frames superconducting quantum-chip design as an engineering workflow rather than a collection of isolated simulations. We argue that scalable and fault-tolerant quantum processors will require such a continuous model chain from device physics and electromagnetic fields to quantum dynamics, noise, manufacturability, and system-level yield.

16.
arXiv (CS.AI) 2026-06-16

Synthetic Counteradaptation: A Principle of Human-AI Co-evolution

arXiv:2606.15503v1 Announce Type: new Abstract: In this paper, we introduce the concept of synthetic counteradaptation, a process where human and AI systems co-evolve by adapting to each other's strategies and behaviors. Synthetic counteradaptation occurs when AI systems develop novel strategies or social protocols, prompting humans to extract insights and adapt their own behaviors in response, leading to the emergence of new agent interaction dynamics. To illustrate these dynamics, we analyze examples from various contexts, including the game of Go, mixed-motive social interactions, and geopolitical simulations. By exploring these cases, we demonstrate how synthetic counteradaptation provides a framework for understanding the recursive and co-evolutionary nature of human-AI interactions in multi-agent environments.

17.
arXiv (quant-ph) 2026-06-17

Learning Arbitrary Lindbladians with Quantum Error Correction

arXiv:2606.18188v1 Announce Type: new Abstract: We study ansatz-free Lindbladian learning, the problem of reconstructing the generator of an open quantum system without prior knowledge of its Hamiltonian or dissipator structures. This problem exhibits two distinct information-theoretic precision limits: Hamiltonian components unmasked by dissipation are Heisenberg-limited, while the remaining Lindbladian components are subject to the quadratically worse standard quantum limit. Existing approaches that attain these optimal scalings strongly rely on pre-specified structure of interaction and noise, leaving the ansatz-free setting an open problem. In this work, we present the first standard-quantum-limited algorithm for learning arbitrary sparse Lindbladians. Under an additional physically motivated regularity condition, our framework also learns the Hamiltonian component disjoint from the dissipator at the Heisenberg limit, without prior knowledge of either the Hamiltonian or dissipator supports. Our main technical ingredient is a recursive random stabilizer-code construction that suppresses the strongest Lindbladian terms while preserving sensitivity to weaker unknown ones. These results establish a scalable framework for characterizing unknown open quantum systems, with quantum error correction serving as a key learning primitive.

18.
arXiv (CS.CL) 2026-06-18

JetFlow: Breaking the Scaling Ceiling of Speculative Decoding with Parallel Tree Drafting

Speculative decoding (SD) accelerates autoregressive Large Language Models (LLMs) by drafting multiple tokens and verifying them in parallel, but it faces a scaling limitation: increasing the draft budget improves speed only when acceptance remains high and drafting overhead stays low. This ceiling has been difficult to break because prior head-based SD methods face a causality-efficiency dilemma. Autoregressive drafters produce path-conditioned candidates that are effective for tree speculative decoding with higher acceptance length, but their drafting cost grows with tree depth. Bidirectional block-diffusion drafters generate all positions in one pass, but their branch-agnostic marginals can form individually plausible yet mutually inconsistent trees, wasting budget and reducing acceptance. We propose JetFlow, a head-based SD framework that combines one-forward drafting efficiency with branch-wise causal conditioning. JetFlow trains a causal parallel draft head over fused hidden states from the frozen target model, producing candidate trees whose scores align with the target model's autoregressive factorization. This enables JetFlow to convert larger draft budgets into longer accepted prefixes and higher end-to-end speedup. Across math, coding, and chat benchmarks on dense and MoE Qwen3 models, JetFlow consistently outperforms bidirectional-head and tree-based SD baselines. On H100 GPUs, JetFlow achieves up to 9.64x speedup on MATH-500 and 4.58x on open-ended conversational workloads, with further latency gains demonstrated through vLLM integration under realistic serving loads. Our code and models are available at https://github.com/hao-ai-lab/JetFlow.

19.
bioRxiv (Bioinfo) 2026-06-14

Systematic AI-Driven Drug Repurposing via Clinical Trial Data Mining: A Framework and Six Cross-Therapeutic Case Studies.

作者:

Drug repurposing, the application of approved or shelved compounds to new therapeutic indications, offers a cost- and time-efficient alternative to de novo drug discovery. However, the systematic identification of repurposing candidates from the rapidly expanding body of clinical trial data remains a significant challenge. Here we present a publicly accessible AI-powered tool that mines the ClinicalTrials.gov registry to identify approved drugs with under-explored therapeutic potential in high-value disease areas. The tool integrates natural language processing, mechanism-of-action pathway analysis, and trial density scoring to surface candidates where biological plausibility is high and clinical trial coverage is sparse. We demonstrate the tool's utility across six cross-therapeutic case studies spanning oncology, cardiology, neurology, rare diseases, immunology, and infectious disease. Key findings include: the identification of Zonisamide as an under-explored combination candidate for obesity alongside GLP-1 receptor agonists; mechanistic validation of SGLT2 inhibitors in heart failure with preserved ejection fraction (HFpEF); and a novel cross-domain mapping of anti-TNF biologics to early-stage neurodegeneration via shared neuroinflammatory pathways. The tool is freely accessible and designed to lower the barrier for academic and industry researchers to systematically pursue repurposing opportunities.

20.
arXiv (CS.CV) 2026-06-16

LIBERO-Occ: Evaluating and Improving Vision-Language-Action Models under Scene-Induced Occlusion via Viewpoint Imagination

Vision-Language-Action (VLA) models achieve strong performance on standard manipulation benchmarks, but most evaluations assume that task-relevant objects are fully visible. This assumption often fails in realistic settings, where occlusion makes manipulation partially observable. In this paper, we study scene-induced occlusion as a fundamental challenge for VLA models and introduce LIBERO-Occ, an occlusion-oriented extension of LIBERO. Experiments show that state-of-the-art VLAs suffer substantial performance degradation under occlusion. To address this issue, we propose Viewpoint Imagination (VIM), which generates a complementary view from an occluded primary observation and conditions action prediction on both observed and imagined evidence. VIM improves robustness across task suites, occlusion types, and severity levels without requiring additional cameras at deployment time, suggesting that viewpoint imagination is an promising mechanism for perception completion in partially observable manipulation. Our benchmark and corresponding code are available at: \href{https://github.com/litsh/Libero-Occ}{https://github.com/litsh/Libero-Occ}.

21.
arXiv (CS.AI) 2026-06-16

STRIDE: Strategic Trajectory Reasoning via Discriminative Estimation for Verifiable Reinforcement Learning

arXiv:2606.15866v1 Announce Type: new Abstract: Reinforcement Learning with Verifiable Rewards (RLVR) has become an effective post-training paradigm for improving the reasoning abilities of large language models. However, existing RLVR methods typically rely on final-answer correctness to assign trajectory-level rewards, providing sparse supervision and treating all tokens uniformly regardless of their actual contribution to reasoning. Although recent studies introduce intermediate signals such as process rewards, high-entropy tokens, and semantic uncertainty, these signals are often not inherently verifiable and may fail to distinguish beneficial strategic patterns from harmful ones. To address this limitation, we propose STRIDE (Strategic Trajectory Reasoning with Discriminative Estimation), a fine-grained RLVR framework that derives strategic reasoning supervision from verifiable outcomes. STRIDE contrasts successful and failed trajectories within each response group to estimate the outcome-discriminative preference of each $n$-gram strategic pattern, and further combines this signal with reasoning saliency entropy to identify decision-relevant strategic patterns. These patterns are assigned differentiated advantage values during RL optimization, enabling more precise credit assignment while preserving the verifiability of RLVR. Extensive experiments demonstrate that STRIDE consistently improves reasoning performance across diverse models, tasks, and extended settings, including VLMs and agent-based systems.

22.
arXiv (CS.CL) 2026-06-12

Influcoder: Distilling Decoders' Gradient Influence Rankings into an Encoder for Data Attribution

With the growth of LLMs' (Large Language Models) capabilities, there has been an increasing push to curate high quality datasets by filtering samples in the training data. In general, Data Attribution (DA) methods aim to estimate how individual samples in a training dataset can precondition a model to generate certain outputs. As an example, one might be interested in which samples in the data could be the source of toxic behavior after training the LLM. Many methods quantify this conditioning through the paradigm of influence functions. While methods of this family are effective in its function, they lack the necessary processing speed and storage compactness to be practically implemented on large datasets. We propose a method, Influcoder, as a quick and cost-effective approach to influence-based Data Attribution at scale.

23.
arXiv (CS.AI) 2026-06-16

Can Artificial Intelligence Accelerate Technological Progress? Researchers' Perspectives on AI in Manufacturing and Materials Science

arXiv:2511.14007v3 Announce Type: replace-cross Abstract: Artificial intelligence (AI) raises expectations of substantial increases in rates of technological progress, but such anticipations are often not connected to detailed ground-level studies of AI use in innovation processes. Accordingly, it remains unclear how and to what extent AI can accelerate innovation. To help to fill this gap, we explore and assess results from 32 interviews with U.S.-based academic manufacturing and materials sciences researchers experienced with AI and machine learning (ML) techniques. We found that AI was primarily used for modeling of materials and manufacturing processes, facilitating cheaper and more rapid search of design spaces for materials and manufacturing processes alike. Benefits included cost, time, and computation savings in technology development. However, AI/ML tools were unreliable outside design spaces for which dense data were already available; they required skilled and judicious application in tandem with older research techniques; and concerns were raised about the potential to detrimentally circumvent opportunities for disruptive theoretical advancement. Based on these results, we suggest there is reason for optimism about acceleration in sustaining innovations through the use of AI/ML; but that support for conventional empirical, computational, and theoretical research is required to maintain the likelihood of further disruptive advances in manufacturing and materials.

24.
arXiv (CS.CV) 2026-06-16

SpatialAvatar-0: High-Quality 4D Head Avatar with Multi-Stage Reconstruction

High-quality 4D head avatars from one or a few source portraits are central to telepresence, AR/VR, and digital-human interaction. 3D Gaussian Splatting (3DGS) has emerged as the dominant representation, with two complementary regimes (generalizable feed-forward predictors and per-subject refiners) maturing in parallel. However, existing feed-forward predictors are trained on a single dataset family with a hard-coded source count, inheriting the corresponding domain bias. Per-subject refiners require 300K–600K iterations and rely on adaptive densification that destroys upstream Gaussian layouts, preventing the two regimes from sharing a representation end-to-end. To bridge both regimes we propose SpatialAvatar-0 on a shared FLAME-mesh-bound Gaussian representation: a feed-forward generator with a parameter-free K-source mean-pool and a monocular-temporal to multi-view-spatial two-phase schedule that anchors against identity-prior collapse onto the smaller multi-view set. We further introduce a 10K-iter layout-preserving per-subject refinement loop that freezes the FLAME-binding and Gaussian count and replaces densification with a three-component anti-spike regularization. On VFHQ/HDTF cross-domain zero-shot we surpass the in-domain leader GAGAvatar by +1.5 dB PSNR despite never training on either test domain, and on the SplattingAvatar monocular benchmark we lead every reported metric, surpassing the 300K-iter GeoAvatar by +1.3 dB PSNR at up to 60x shorter per-subject schedule than common SOTA baselines. Website: https://spatialwalk.github.io/SpatialAvatar-0.

25.
arXiv (math.PR) 2026-06-15

Real-order moments, tail representations, and logarithmic means

arXiv:2606.14019v1 Announce Type: cross Abstract: This paper develops a unified framework for the study of real-order moments of arbitrary random variables. General integral representations are established in terms of cumulative distribution functions and survival functions, covering continuous, discrete, and mixed distributions supported on the whole real line. These formulas extend the classical tail-integral identities for nonnegative random variables and provide a common treatment of positive, fractional, and negative moments. For discrete distributions, explicit series representations are derived in terms of cumulative probabilities, yielding simple criteria for the existence of moments. Applications are presented for the zeta and Skellam distributions, illustrating how tail behavior determines moment finiteness and how moments can be represented geometrically through cumulative distribution functions. In addition, a representation for logarithmic moments is obtained, linking logarithmic means, Laplace transforms, and the classical Frullani identity. The results provide a unified perspective on moment representations and establish useful connections between tail probabilities, distribution functions, Laplace transforms, and moment existence.