论文广场 - AcademicHub

01.

Nature (Science) 2026-06-22 DOI: HASH:5c9837b475e0a18faba3609cfcb18315

Why heritage sites are at risk in a warming world — and how to save them

作者:

As rising seas and intensifying disasters threaten historic sites worldwide, new ways to understand, preserve and adapt these places are needed urgently. As rising seas and intensifying disasters threaten historic sites worldwide, new ways to understand, preserve and adapt these places are needed urgently.

阅读与讨论 → 访问原文 →

02.

arXiv (CS.CV) 2026-06-16 DOI: arXiv:2605.21028

DySink: Dynamic Frame Sinks for Autoregressive Long Video Generation

作者:

Bo Ye ↗Xinyu Cui ↗Jian Zhao ↗Tong Wei ↗Min-Ling Zhang ↗

Autoregressive long video generation often adopts bounded-memory streaming for efficiency, typically combining local windows for short-term continuity with static early-frame sinks as long-range anchors. However, this fixed allocation keeps early frames cached even when the current visual state has substantially diverged from them, while discarding potentially more relevant intermediate history. As a result, the retained long-range context may become less adaptive and bias generation toward outdated cues; in severe cases, RoPE-induced phase re-alignment can homogenize inter-head attention and cause sink collapse, where content regresses toward sink frames. We propose DySink, a retrieval-based framework that maintains a compact memory bank and selects visually relevant historical frames as dynamic frame sinks. DySink couples adaptive retrieval with a sink anomaly gate, which detects excessive inter-head consensus over retrieved context and suppresses collapse-prone context. Experiments on minute-long videos show that DySink consistently improves dynamic degree over strong baselines while also achieving higher temporal quality. The code and model weights will be released at https://github.com/yebo0216best/DySink.

阅读与讨论 → 访问原文 →

03.

arXiv (CS.LG) 2026-06-11 DOI: arXiv:2606.11490

OmniLoc: A Geometry-Aware Foundation Model for Anchor-Free UE Localization Across Diverse Indoor Environments

作者:

Lei Chu ↗Yuning Zhang ↗Omer Gokalp Serbetci ↗Anushka Katiyar ↗Bassel Abou Ali Modad ↗Andreas F. Molisch ↗

arXiv:2606.11490v1 Announce Type: new Abstract: Indoor localization from wireless measurements remains challenging in large-scale deployments due to substantial variation in building geometry, the set of detectable access points (APs), and the heterogeneity of received signals. Existing learning-based methods often perform well only in limited settings and degrade under environmental shifts, making robust anchor-free localization across diverse indoor environments notoriously difficult. In this paper, we present OmniLoc, an environment-interactive foundation model for anchor-free user equipment localization across diverse indoor environments. To the best of our knowledge, OmniLoc is the first foundation-model-based approach built directly on wireless measurements for this task. OmniLoc is built on three key designs. First, a unified input tokenization module converts heterogeneous wireless measurements into a common representation that is more amenable to learning. Second, a geometry-aware Transformer performs AP-aware feature extraction by emphasizing dominant APs while aggregating complementary evidence from supporting APs. Third, a geometry-aware location estimation module conditions regression on geometric embeddings to produce geometrically consistent location predictions. We evaluate OmniLoc on both a large-scale in-house dataset and a public benchmark dataset. Results show that OmniLoc significantly outperforms existing methods, consistently improves existing backbones when its design components are integrated, and demonstrates strong generalization in cross-environment evaluations.

阅读与讨论 → 访问原文 →

04.

arXiv (CS.CV) 2026-06-19 DOI: arXiv:2606.19767

Contour-Constrained Deformable Registration with Parameter Characterization for Head and Neck Surgical Guidance

作者:

Qingyun Yang ↗Jon S. Heiselman ↗Ayberk Acar ↗Morgan J. Ringel ↗Michael I. Miga ↗Matthieu Chabanas ↗Michael C. Topf ↗Jie Ying Wu ↗

With 890,000 annual new cases globally, head and neck squamous cell carcinoma has one of the highest recurrence rates among solid malignancies. Although frozen section analysis is the standard of care for intraoperative margin assessment, accurately relocating detected positive margins on the resection bed remains challenging due to imprecise alignment between resected specimens and their resection bed, compounded by post-resection mucosal tissue shrinkage. We present a biomechanics-driven deformable registration framework that corrects post-resection tissue deformation to provide intraoperative guidance. Our approach registers 3D specimen meshes to intraoperative resection bed point clouds using a deformable registration approach based on regularized Kelvinlet basis functions. The registration matches surface point clouds, fiducial landmarks, and boundary contour constraints that directly penalize perpendicular distance-to-agreement between specimen and resection bed boundaries. Across nine specimens from skin, buccal mucosa, and tongue sites, the overall mean target registration error was $11.11 \pm 4.07$ mm using rigid registration, which decreased to $8.20 \pm 2.68$ mm (26.19\% reduction) using deformable registration without contour constraint. The proposed contour-constrained deformable registration further reduced the error to $5.62 \pm 2.28$ mm, a 49.41\% reduction relative to rigid registration. We observed the largest reduction in the most clinically challenging tongue specimens. We also performed a systematic two-stage parameter search to characterize the relative importance of surface alignment, fiducial correspondences, contour constraint, and strain energy regularization. This search revealed that contour weighting dominates registration accuracy for tissue types with large lateral deformation, while the algorithm operates over a broad range of parameter combinations.

阅读与讨论 → 访问原文 →

05.

arXiv (quant-ph) 2026-06-19 DOI: arXiv:2601.03885

Efficient upsampling for tensor-network and quantum-state encoded functions

作者:

Siddhartha E. Guzman ↗Egor Tiunov ↗Leandro Aolita ↗

arXiv:2601.03885v2 Announce Type: cross Abstract: Both tensor trains (TTs) and quantum states provide compressed representations of grid-structured data with potentially exponential compression power. We present a unified framework for upsampling data encoded in vector amplitudes, with efficient realizations in both classical TT and quantum settings. Starting from an $n$-core TT or an $n$-qubit state on a coarse grid with $2^n$ points, the construction produces an $(n+m)$-core TT or $(n+m)$-qubit state on a finer grid with $2^{n+m}$ points. In the TT setting, it supports interpolation, quasi-interpolation, augmentation, and synthesis through efficient low-rank contractions, with the added $m$ cores retaining constant rank. For function-value encodings, the resulting interpolation satisfies an $\ell^2$-error bound independent of the number of added grid points, achieves exponential compression at fixed accuracy, and has a logarithmic complexity in the number of grid points. In the quantum setting, the refined state is prepared by a $\mathrm{poly}(n,m)$-size circuit using $\log(p+1)$ ancillas, where $p$ controls the smoothness of the quasi-interpolant; the corresponding error scales quadratically with the initial grid spacing. We validate our framework for tensor networks in one-, two-, and three-dimensional examples, including functions, derivatives, airfoil masks, and synthetic random fields such as three-dimensional turbulence. In particular, fractal fields can be generated directly in TT format with logarithmic memory and runtime. These results open a practical route to multiscale solvers, generative models, and geometry-aware algorithms on tensor-network and quantum platforms, with potential applications in scientific simulation, imaging, and real-time graphics.

阅读与讨论 → 访问原文 →

06.

arXiv (CS.CL) 2026-06-19 DOI: arXiv:2606.19668

Code-Switching Reveals Language Anchoring in Multilingual LLMs

作者:

Jeonghyun Park ↗Seunghyun Yoon ↗Yonghyun Jun ↗Hwanhee Lee ↗

Multilingual Large Language Models (MLLMs) are increasingly expected to handle Code-Switched (CS) inputs, yet mixing languages frequently degrades performance relative to source- or target-language monolingual counterparts. To understand this degradation, we use grammar-forced CS as a controlled diagnostic setting for locating CS representations relative to their source and target counterparts. We introduce Anchor Bias, a geometric measure that quantifies language anchoring, whether a CS hidden state aligns closer to its source or target language counterpart. Across diverse MLLMs, Anchor Bias reveals a consistent grammar-frame effect: source-framed CS stays source-anchored, whereas target-framed CS shifts target-ward and shows larger Question Answering (QA) degradation. Motivated by this representational pattern, we propose CANVAS (Contextual Anchor-based Neural Vector Alignment Steering), an inference-time intervention that extracts a source-side canvas from the input and softly steers target-language hidden states toward the source anchor during prefill. CANVAS consistently recovers QA F1 across MLLMs and CS conditions, showing that internal anchoring signals provide an actionable target for mitigating CS inference failures.

阅读与讨论 → 访问原文 →

07.

arXiv (CS.AI) 2026-06-11 DOI: arXiv:2606.11379

Automated Mediator for Human Negotiation: Pre-Mediation via a Structured LLM Pipeline

作者:

Jamie Bergen ↗Sarit Kraus ↗

arXiv:2606.11379v1 Announce Type: new Abstract: Pre-mediation, the preparatory phase preceding direct human negotiation, plays a critical role in achieving mutually beneficial agreements, yet is often omitted due to cost, time, and limited access to trained mediators. We introduce an automated mediator for human negotiation, implemented as a structured pipeline of LLM modules, that supports pre-mediation in integrative negotiation settings. The pipeline decomposes preparation into specialized modules for dialogue, preference prediction, response-level critique, and structured summarization, separating inference, generation, and evaluation to address limitations of monolithic single-prompt approaches. We use the term "agent" for each module following common LLM-systems terminology, but the components are not autonomous and do not interact peer-to-peer; outputs are passed forward in a fixed sequence. We evaluate the system in two controlled human-subject experiments comparing AI-based pre-mediation with professional human mediators in a multi-issue negotiation scenario. On short-term self-reported measures, the automated mediator achieves preparation outcomes broadly comparable to human mediators, including trust in the mediator and confidence in reaching mutually beneficial agreements, while achieving substantially lower error on the preference-inference task under our scenario and prompts (36% lower RMSE). A second study shows that targeted prompt refinements reduce excessive affirmation patterns from 36.6% to 16.8%, matching human mediator baselines. Our findings suggest that structured LLM pipelines can provide scalable, low-effort pre-mediation support broadly comparable to human mediators on short-term self-reported preparation outcomes. The pipeline's single-party design mirrors how human mediators run pre-mediation today and enables parallel deployment across all parties to a dispute, supporting scalability.

阅读与讨论 → 访问原文 →

08.

arXiv (CS.AI) 2026-06-12 DOI: arXiv:2606.08098

When Does Delegation Beat Majority? A Delegation-Based Aggregator for Multi-Sample LLM Inference

作者:

Yasushi Sakai ↗Allen Song ↗Kent Larson ↗

arXiv:2606.08098v2 Announce Type: replace Abstract: Majority voting over sampled answers is the dominant unsupervised aggregator for multi-sample LLM inference. In this paper, we show a delegation-based aggregator (Propagational Proxy Voting, PPV; Sakai et al., 2025) yields an unsupervised consensus rule that beats majority on MMLU-Pro by +1.5 pp overall and +2.24 pp on the non-trivial subset (paired McNemar p ~ 1.0e-14, n = 8,099). Majority discards two signals that every sample carries: within-group letter entropy and between-group reasoning geometry. PPV exposes per-voter levers that consume exactly these two signals: When (how much weight a voter keeps on its own pick) and Whom (how it splits the remainder across peers). We drive When with letter entropy and Whom with per-question-centered embedding cosine. Our method needs no gold labels and no auxiliary training: per-question, we partition 128 sampled generations into 16 groups, compute each group's letter-level semantic entropy and reasoning embedding centroid, and feed both into a stochastic delegation matrix whose stationary distribution selects the consensus answer. We walk through an example in which PPV overturns a clear 10-6 majority for the wrong letter: the 10-voter majority cluster is geometrically incoherent (mean within-cluster cosine -0.02) while the 6-voter minority is tight (+0.26), so propagated delegation mass concentrates on the minority's answer even though entropy alone would keep the majority ahead. We further report delegation strategies with negative results that constrain the design space for unsupervised LLM aggregation. No within-question ensemble of confidence modes closes the oracle gap.

阅读与讨论 → 访问原文 →

09.

arXiv (quant-ph) 2026-06-16 DOI: arXiv:2606.15664

Synthesizing Arbitrary Non-Hermitian Hamiltonian with Stochastic Floquet Engineering

作者:

Lingzhen Guo ↗Hui Jing ↗

arXiv:2606.15664v1 Announce Type: new Abstract: The conventional Floquet engineering scheme synthesizes a given target Hamiltonian with a deterministic temporal periodic driving field. In this work, we introduce the stochastic Floquet engineering scheme that can synthesize an arbitrary non-Hermitian target Hamiltonian using a time-periodic driving field with noisy amplitude. Our method is rooted in the Hermitian dynamics taking noise as a valuable quantum resource with no need for loss or gain in prior. We apply our method to engineer a cavity Hamiltonian with dissipative coupling between Fock states, and to prepare a given quantum state from a generally arbitrary quantum state. The stochastic Floqut engineering also provides a way to generate non-unitary quantum gates, which take advantage in certain tasks compared to unitary quantum computing, without the need for ancillae or state-dependent updating.

阅读与讨论 → 访问原文 →

10.

arXiv (quant-ph) 2026-06-15 DOI: arXiv:2606.14489

Physics-Informed Variational Quantum Classifier for Phase Detection in Strongly Correlated Matter

作者:

Hugo Catal\'a ↗Ezequiel Valero ↗Germ\'an Rodrigo ↗

arXiv:2606.14489v1 Announce Type: new Abstract: The characterisation of quantum phases in strongly correlated systems is a crucial milestone for the deployment of quantum sensors. In this work, we present a Physics-Informed Variational Quantum Classifier (VQC) designed to detect the topological phase transition between the Fermi polaron quasiparticle and the molecular bound state. Unlike conventional Machine Learning approaches, our quantum architecture is constructed via the Trotterised time-evolution of an effective Hamiltonian, ensuring that the learnable parameters correspond to interpretable physical quantities. We show that the VQC efficiently discovers the optimal interferometric protocol, specifically the evolution time and effective bath interactions required to maximise the visibility of Ramsey fringes, thereby clearly distinguishing the Bose-Einstein Condensate (BEC) and Bardeen-Cooper-Schrieffer (BCS) regimes. Furthermore, we report the validation of this classifier on the QRed superconducting quantum processor (BSC-CNS). Despite the intrinsic hardware noise and decoherence, the VQC preserves the relative ordering of the topological phases. We demonstrate that the physics-informed architecture achieves a linear gate complexity $\mathcal{O}(N)$, bypassing the exponential memory wall of classical simulation and ensuring scalability to many-body regimes.

阅读与讨论 → 访问原文 →

11.

arXiv (CS.CL) 2026-06-18 DOI: arXiv:2606.18543

CEO-Bench: Can Agents Play the Long Game?

作者:

Haozhe Chen ↗Karthik Narasimhan ↗Zhuang Liu ↗

Language model agents are becoming proficient executors at isolated, short-horizon tasks such as software engineering and customer service. Yet real-world challenges require a combination of sophisticated skills that remain largely untested in agents: (1) navigating long horizons amid uncertainty; (2) acquiring information in noisy environments; (3) adapting to a changing world; (4) orchestrating multiple moving parts toward a coherent goal. We introduce CEO-Bench, which evaluates these capabilities together by simulating a representative real-world task: operating a startup for 500 days. An agent manages pricing, marketing, budgeting, and many other aspects of a fictional company through a programmable Python interface, operating in the same environment and facing the same challenges as a human CEO. Success demands analyzing noisy, interconnected business databases, translating signals into sound strategy, and coordinating many decisions with programming. The strongest agents write sophisticated code that simulates customer cohorts to forecast future cash and mines negotiation history to uncover hidden customer preferences. Even so, most state-of-the-art models struggle in this environment. Only Claude Opus 4.8 and GPT-5.5 finish above the $1M starting balance, and neither consistently turns a profit. CEO-Bench takes a first step toward measuring the intelligence required to drive sustained, adaptive progress over time.

阅读与讨论 → 访问原文 →

12.

arXiv (CS.CL) 2026-06-16 DOI: arXiv:2606.16215

PACT: Privileged Trace Co-Training for Multi-Turn Tool-Use Agents

作者:

Zhenbang Du ↗Jun Luo ↗Zhiwei Zheng ↗Xiangchi Yuan ↗Kejing Xia ↗Dachuan Shi ↗Qirui Jin ↗Qijia He ↗Shaofeng Zou ↗Yingbin Liang ↗Wenke Lee ↗

Multi-turn tool-use agents must reason, call tools, and adapt to observations across several interaction turns. Post-training such agents is challenging, as reinforcement learning often suffers from sparse rewards and weak credit assignment despite matching the prompt-only inference setting, while supervised fine-tuning on expert traces provides dense process supervision but can over-constrain the model to fixed trajectories. To tackle this, we propose PACT, a Privileged trAce Co-Training framework for multi-turn tool-use agents. The key idea is to use expert traces only as training-time optimization signals rather than rollout-time hints. PACT keeps rollout generation prompt-only, then uses expert traces to guide optimization through two complementary signals: a trace-conditioned RL surrogate that evaluates prompt-only rollouts under expert-trace context, and a component-aware SFT loss that supervises reasoning prefixes and tool-calls with annealed strength. To reduce over-reliance on the training-only trace context, PACT further introduces a prompt-only anchoring. We also provide a latent-trace view that connects the two trace-based objectives and explains how expert traces can guide optimization without being used during rollout generation. Experiments on FTRL, BFCL, and ToolHop show that PACT consistently improves over strong SFT- and RL-based baselines, highlighting the value of privileged trace co-training for multi-turn tool-use learning.

阅读与讨论 → 访问原文 →

13.

arXiv (CS.AI) 2026-06-19 DOI: arXiv:2606.10358

KG-SoftMAP: Soft Knowledge-Graph Priors for Bayesian Network Structure Learning from Sparse Discrete Data

作者:

Guoliang Xu ↗James E. Corter ↗

arXiv:2606.10358v2 Announce Type: replace-cross Abstract: Learning Bayesian network (BN) structure from sparse discrete data is hard: when each instance records only a few variables, most variable pairs lack the joint observations needed for reliable scoring, and data-only methods recover little structure. However, imperfect domain knowledge, expressible as a weighted directed knowledge graph (KG), is often available. We propose KG-SoftMAP, which encodes such a KG as a finite-strength, confidence-weighted edge prior and maximizes a MAP objective combining the BDeu score with a logit-form prior; the KG may be expert-curated or LLM-extracted. On synthetic benchmarks with known DAGs, KG-SoftMAP reaches Directed-F1 (DF1) $0.19$–$0.32$ at observation rate $\rho=0.05$ and DF1 $0.44$–$0.97$ at $\rho\geq0.2$, while every data-only learner tested stays near zero under the same sparse masks. Recovery tracks KG quality: controlled corruption degrades it smoothly, a zero-signal KG yields DF1 $0.00$, and a blindly LLM-extracted KG with imperfect precision and recall still drives substantial recovery. On three real sparse educational datasets, the learned BN acts as a concept-level posterior model: on SAF it matches logistic regression (LR) within $0.03$ F1_FAIL while providing an inspectable concept graph, calibrated Fail probabilities, and tractable posterior queries from partial observations.

阅读与讨论 → 访问原文 →

14.

medRxiv (Medicine) 2026-06-18 DOI: HASH:f5dd52ac6dd6f167bae6b329954ac000

Excess mortality in Germany during 2020-2023: A descriptive age-stratified analysis

作者:

Sauter ↗

This study investigates excess mortality in Germany in the years from 2020 to 2023 and its temporal alignment with reported COVID-19 deaths. The analysis uses annual and weekly all-cause mortality data and linear baseline trends derived from pre-pandemic years. Possible effects of demographic and population changes on baseline trends were also examined. Excess mortality was analysed over time and across age groups. Excess mortality was observed in all investigated years, rising from 2020 to its highest value in 2022. In absolute terms, the age group [≥]80 years accounted for the largest proportion of excess deaths throughout the study period. After 2021, elevated mortality relative to baseline was also observed in younger age groups down to 15 years of age, although absolute numbers remained substantially lower than in older groups. No evidence of excess mortality was observed for individuals younger than 15 years. Periods of excess mortality were temporally aligned with waves of reported COVID-19 deaths. In 2020, cumulative excess mortality after calendar week 11 closely matched reported COVID-19 deaths (43 876 vs. 41 835 deaths). Weekly excess mortality, reported COVID-19 deaths and wastewater viral load, when available showed strong temporal synchrony, although excess mortality increasingly exceeded reported COVID-19 deaths during later pandemic waves. Temporal patterns differed from the typical seasonal mortality peaks commonly associated with influenza epidemics during the early months of the year. In 2023, excess mortality declined substantially, possibly indicating a return to mortality levels before the emergence of SARS-CoV-2.

阅读与讨论 → 访问原文 →

15.

arXiv (CS.CL) 2026-06-11 DOI: arXiv:2606.11204

Benchmarking Large Language Models for Safety Data Extraction

作者:

Jonas Grill ↗Thomas Bayer ↗S\"oren Berlinger ↗

Accurate extraction of structured information from Safety Data Sheets (SDS) remains challenging in industrial safety due to heterogeneous document formats and the limitations of traditional rule-based methods. This study benchmarks state-of-the-art Large Language Models (LLMs) for automated SDS data extraction, comparing text-based and multimodal processing pipelines. We systematically evaluate four models: Gemini 1.5 Pro, GPT-4o, Claude 3.7 Sonnet, and Llama 3.1-70B, across three prompting strategies: zero-shot, few-shot, and chain-of-thought. The evaluation framework assessed accuracy, latency, and cost across more than 50,000 extracted data fields. Results show that text-based extraction consistently outperforms multimodal processing across all metrics. Gemini 1.5 Pro combined with a Chain-of-Thought prompt achieved the highest accuracy (84%), outperforming GPT-4o (81%) and Claude 3.7 Sonnet (79%). However, no model surpassed the 90% accuracy threshold commonly required for reliable real-world deployment. These findings indicate that general-purpose LLMs are not yet robust enough for unsupervised industrial use, though performance suggests strong potential with task-specific fine-tuning. Future research should focus on domain-adapted training, model calibration, and the integration of Human-in-the-Loop verification to ensure safety-critical reliability.

阅读与讨论 → 访问原文 →

16.

arXiv (CS.AI) 2026-06-12 DOI: arXiv:2606.12618

"Did you lie?" Evaluating Lie Detectors across Model Scale and Belief-Verified Model Organisms

作者:

Alan Cooney ↗David Africa ↗Geoffrey Irving ↗

arXiv:2606.12618v1 Announce Type: new Abstract: Robust lie detectors for language models could enable powerful techniques for auditing, monitoring, and post-hoc investigation of model behaviour, but evaluating them requires testbeds where models verifiably believe the opposite of what they say. We show that existing trained model organisms often fail this requirement, leaving prior positive and negative detection results difficult to interpret. We address this with 13 reasoning model organisms whose hidden beliefs are verified in chain-of-thought and shown to generalise to held-out tasks, alongside Varied Deception, a prompted-lying testbed covering a broad range of lie-inducing motivations. On these testbeds we evaluate four detectors: a chain-of-thought judge, a logprob classifier, and two activation probes, including Did-You-Lie (DYL), a new method for training follow-up probes. On prompted lying, across 31 open-weight models spanning 2B to 1T parameters, all four detectors show positive scaling with model capability. However, every activation- and logprob-based detector drops sharply on our trained model organisms, with DYL retaining the most signal; only the chain-of-thought judge remains strong, with 0.82 balanced accuracy, partly as an artefact of our verification process favouring CoT-readable beliefs. Current lie detectors therefore cannot support high-confidence claims about model beliefs, and we suggest research directions that may address some of their current limitations. We release our datasets, model organisms, and trained detectors.

阅读与讨论 → 访问原文 →

17.

arXiv (CS.AI) 2026-06-12 DOI: arXiv:2606.12587

Strategic Decision Support for AI Agents

作者:

Shayan Kiyani ↗Sima Noorani ↗George Pappas ↗Hamed Hassani ↗

arXiv:2606.12587v1 Announce Type: new Abstract: Traditionally, decision support studies how humans use machine learning models to make better decisions. In modern agentic systems, this division of roles is increasingly reversed: AI agents act on behalf of users, while humans and tools becomes support mechanisms around them. This role reversal brings reliability concerns to the forefront, since agentic errors can be consequential and agent behavior must remain aligned with human goals and constraints. Departing from the classical view of decision support, we revisit its two basic principles, the cost–value tradeoff of seeking support and the role of uncertainty quantification, in a setting where AI agents are the central actors. We propose a framework for strategic decision support for AI agents through an optimization problem that minimizes support usage subject to controlling a counterfactual missed-support error: the probability that the agent acts alone on instances where support would have materially improved its output. At the population level, we show that the optimal policy is a threshold rule on the value of support. Building on this structure, we develop an online algorithm that adaptively thresholds such a score and uses randomized exploration to control missed-support error without distributional assumptions. We further introduce a calibration-on-the-fly method that reduces unnecessary support calls online. We instantiate this framework across diverse scenarios, including information gathering, human–AI collaboration, and tool use, showing how each can be modeled through the same strategic decision-support lens. Experiments across these settings show that our method reliably controls the target error while substantially reducing support usage in practice.

阅读与讨论 → 访问原文 →

18.

arXiv (CS.CV) 2026-06-16 DOI: arXiv:2606.15604

Parameter-Efficient Adaptation of SAM 3 for Automated ITV Generation from 4DCT Images

作者:

Changwoo Song ↗

Four-dimensional computed tomography (4DCT) captures the full respiratory cycle of thoracic anatomy, yet current Internal Target Volume contouring workflows process each phase in isolation, discarding temporal coherence and leaving contours vulnerable to phase-specific artifacts. We present a lightweight framework that applies parameter-efficient fine-tuning to the Segment Anything Model 3 (SAM 3) via low-rank adaptation (LoRA) to align its text-prompted segmentation with the medical domain using only seven annotated 3D CT volumes. Furthermore, the framework incorporates a hard negative mining strategy to improve boundary discrimination in low-contrast thoracic regions. At inference, phase-wise predictions are refined through phase-coherent temporal filtering and spatial connectivity analysis. Since respiratory motion is continuous and periodic, genuine anatomy appears in contiguous blocks of phases, whereas transient artifacts appear sporadically and are thus effectively suppressed. Experiments on pulmonary and cardiac structures yield median Dice scores of 0.968 and 0.910 with 95th-percentile Hausdorff distances of 0.998 mm and 2.931 mm, respectively. The proposed framework effectively eliminates the severe false-positive predictions inherent in the zero-shot inference of the unadapted SAM 3. With only seven annotated volumes, the framework retains over 95% of full-data accuracy, and the entire pipeline is trainable on a single consumer-grade GPU, demonstrating a scalable, data-efficient solution for adaptive radiotherapy.

阅读与讨论 → 访问原文 →

19.

arXiv (CS.LG) 2026-06-12 DOI: arXiv:2606.12507

Rubric-Guided Self-Distillation: Post-Training Without Rubric Verifiers

作者:

MohammadHossein Rezaei ↗Anas Mahmoud ↗Zihao Wang ↗Utkarsh Tyagi ↗Advait Gosai ↗Razvan-Gabriel Dumitru ↗Aakash Sabharwal ↗Bing Liu ↗Yunzhong He ↗

arXiv:2606.12507v1 Announce Type: new Abstract: Rubrics have emerged as an alternative to RLVR in open-ended domains where a single ground-truth final answer is not available. Existing rubric-based training methods rely on an LLM verifier that scores each rollout against rubrics. This introduces substantial training-time overhead, exposes optimization to verifier-specific biases, and reduces rubric feedback to a sparse end-of-trajectory signal. We propose Rubric-Guided Self-Distillation (RGSD), a verifier-free training method in which the base policy, conditioned on the rubric, serves as the teacher for the unconditioned student. RGSD distills the rubric-conditioned teacher distribution into the student token-by-token, replacing sparse trajectory-level rewards with dense per-token learning signals and removing the LLM judge from the training loop entirely. Across Qwen-2.5 (3B, 7B) and Qwen3-Thinking (4B, 8B) models on medical and science domains, RGSD achieves rubric satisfaction comparable to judge-based GRPO while using one on-policy rollout per prompt and no training-time verifier calls. Ablations show that raw rubrics provide a stronger teacher enrichment signal than self-generated reference responses, while a stronger GRPO judge can outperform RGSD in some settings, positioning RGSD as a complementary verifier-free alternative when verifier cost or reliability is the bottleneck.

阅读与讨论 → 访问原文 →

20.

arXiv (quant-ph) 2026-06-12 DOI: arXiv:2605.08341

Quantum metrology via partial quantum error correction

作者:

Yinan Chen ↗Zongyuan Wang ↗Sisi Zhou ↗

arXiv:2605.08341v2 Announce Type: replace Abstract: We introduce a method for error-corrected quantum metrology where only partial quantum error correction (QEC) is needed to suppress local noise and maintain the probe states' super-standard-quantum-limit (super-SQL) sensing performance. This stands in contrast to the existing QEC-assisted sensing schemes in Phys. Rev. Lett. 112, 080801 (2014) and Phys. Rev. Lett. 112, 150802 (2014), where a probe state is encoded into the logical subspace of a quantum code and error correction involves measurements on all checks of the code. Here, we encode the probe states into superpositions of energetically different states of the underlying quantum code. For our probe states, error correction using a subset of checks is enough to suppress noise both before and after phase imprinting. We analyze the tradeoff in noise suppression. For noise parallel to our phase imprinter of weight $l$, we achieve a suppression of $p^\delta$ where $p$ is the noise strength and $\delta = \lfloor (l+1)/2 \rfloor$. We propose an adaptive imprinter weight increasing strategy to maintain super-SQL performance as we scale up the system. In all our examples, checks and phase imprinters are chosen to be local operators avoiding non-local connectivity.

阅读与讨论 → 访问原文 →

21.

arXiv (quant-ph) 2026-06-12 DOI: arXiv:2606.13457

Reduced basis algorithm for solving nonlinear differential equations on quantum computers

作者:

Monica L\u{a}c\u{a}tu\c{s}↗Matthias M\"oller ↗Sauro Succi ↗

arXiv:2606.13457v1 Announce Type: cross Abstract: As quantum computing moves toward scientific computing applications, nonlinear differential equations remain a central challenge since quantum evolution is intrinsically linear. In this work, we introduce a reduced basis algorithm (RBA) for polynomial nonlinear ordinary differential equations (ODEs) and spatially discretized partial differential equations (PDEs). After time discretization, the method composes the resulting polynomial update map over $m$ timesteps, identifies the reduced monomial basis appearing in this composed map, and constructs a linear RBA operator whose action recovers the exact $m$-timestep nonlinear dynamics. Thus, at the level of the chosen discrete update rule, the method introduces no additional approximation error beyond the time discretization error. The qubit number requirement is governed by the size of the reduced monomial basis. For an $n$-dimensional polynomial ODE system of degree $p>1$, the lifted register requires at most $q_m^{\mathrm{ODE}} = O(nm\log p)$ qubits in the full basis scenario. For PDEs discretized on $N^D$ grid points, a locality-based construction requires at most $q_m^{\mathrm{PDE}} = O(D\log N + n m^{D+1}\log p)$ qubits. Hence, the dependence on the grid size remains logarithmic, while the nonlinear overhead is controlled by local reduced basis size. The main computational burden is moved from the quantum computer to a classical preprocessing step, where the reduced monomial basis and RBA operator are constructed for the chosen timestep window. Through numerical tests on the Lorenz system and the one-dimensional Burgers equation, we verify that the RBA reproduces the corresponding discrete time nonlinear dynamics exactly, while exposing the trade-off between timestep composition, reduced basis growth, and locality.

阅读与讨论 → 访问原文 →

22.

arXiv (CS.LG) 2026-06-18 DOI: arXiv:2606.19302

Optimal scenario design for climate emulation

作者:

Christopher B. Womack ↗Shahine Bouabid ↗Andrei Sokolov ↗Popat Salunke ↗Glenn Flierl ↗Sebastian D. Eastham ↗Noelle E. Selin ↗

arXiv:2606.19302v1 Announce Type: cross Abstract: As deep learning for physical systems continues to grow in popularity, efforts to improve generalizability have primarily focused on designing architectures that embed physical constraints. However, for machine-learning surrogate climate models (emulators), we show that the low structural diversity in existing scenarios commonly used to generate training data places a ceiling on predictive skill. Here, we examine whether training datasets themselves can be optimized to improve generalization. We introduce a method to create datasets that produce emulators capable of generalizing to new, structurally different scenarios absent from the training data. We use a differentiable Simple Climate Model (SCM) to calculate the sensitivity of emulator loss to perturbations in the training data, iteratively updating the training data to maximize emulator skill. For an SCM, training on one scenario optimized in this fashion outperforms an emulator trained on six standard ScenarioMIP pathways. We achieve this higher predictive skill despite training on a smaller dataset, finding that our emulator successfully isolates distinct physical behaviors of different climate forcing agents (e.g., greenhouse gases vs. aerosols) without single-forcing runs. We then demonstrate that scenarios optimized using an SCM, when used to drive an intermediate-complexity climate model, produce a training dataset that yields a more skillful emulator than training on ScenarioMIP outputs. Our results suggest that, in the compute-constrained environment of running full-scale climate models, generating a small number of dynamically rich scenarios provides greater marginal value for emulation and characterizing system responses than expanding the suite of traditional emissions pathways.

阅读与讨论 → 访问原文 →

23.

arXiv (quant-ph) 2026-06-12 DOI: arXiv:2606.13010

QuBE/Qubex: an integrated hardware-software system for superconducting qubit experiments with broadband control

作者:

arXiv:2606.13010v1 Announce Type: new Abstract: Achieving high-fidelity operation in large-scale superconducting qubit systems requires not only control hardware with broad frequency coverage, low crosstalk, and tight synchronization but also software that coordinates system configuration, experiment execution, and data analysis. Here we present an integrated qubit-control system that combines broadband microwave hardware with a pulse-level software stack for scalable superconducting qubit experiments. The hardware provides broadband microwave coverage, including an instantaneous span of up to 1.6 GHz from a control output, while the software reduces setup and calibration overhead through automated configuration and built-in experiment workflows. We validate the system on a 64-qubit fixed-frequency transmon chip through full-chip frequency identification and representative demonstrations, including multi-unit far-detuned cross-resonance calibration and benchmarking that yields a measured two-qubit gate fidelity of 98.34%, and multilevel readout beyond the computational subspace. By disclosing the hardware architecture and releasing the software stack as open source, this work provides an inspectable hardware-software foundation for scalable superconducting qubit control experiments.

阅读与讨论 → 访问原文 →

24.

arXiv (CS.LG) 2026-06-16 DOI: arXiv:2606.16388

Robust Neural Tucker Factorization with Bias Correction and Adaptive Initialization

作者:

Yuchao Su ↗Yixin Ran ↗

arXiv:2606.16388v1 Announce Type: new Abstract: High-dimensional incomplete (HDI) tensors are widely used in traffic and climate applications, but sparse observations make accurate completion difficult. The intrinsic non-linear dynamics and non-stationary variations across distinct multi-modal fields severely hinder the efficacy of conventional linear reconstruction frameworks. Neural Tucker factorization provides an effective framework for modeling high-order interactions among tensor modes. By parameterizing underlying structural characteristics into continuous latent spaces, neural representations circumvent the rigid low-rank constraints of classical algebra. However, its performance can still be affected by implementation-level choices, especially parameter initialization and the bias configuration of the final output mapping. Suboptimal initializations frequently lead to variance explosion across the cubically expanded interaction spaces, driving the subsequent non-linear activation boundaries into severe gradient saturation zones, while the omission of a dedicated translation parameter forces interaction weights to implicitly absorb global statistical deviations. This paper proposes a simple yet effective neural Tucker factorization model with Kaiming initialization and bias correction (KaBiN) for HDI tensor completion. The proposed model utilizes Kaiming uniform initialization for the embedding and Tucker linear parameters, and adopts a simple bias correction in output mapping. By elegantly decoupling global mean shifts from local structural representations, the framework provides a highly stable and well-conditioned optimization landscape. Experiments on three real-world HDI tensor datasets show that KaBiN achieves better performance than the original NeuTucF, while introducing minimal computational overhead.

阅读与讨论 → 访问原文 →

25.

arXiv (CS.CV) 2026-06-11 DOI: arXiv:2606.12153

TopoCap: Learning Topology-Agnostic Motion Priors for Monocular Video-to-Animation

作者:

Cheng-Feng Pu ↗Jia-Peng Zhang ↗Meng-Hao Guo ↗Yan-Pei Cao ↗Shi-Min Hu ↗

The explosion of generative 3D assets has created a massive demand for animation, yet current motion capture methods remain brittle, restricted to species-specific templates (e.g., SMPL) or requiring labor-intensive manual rigging. We introduce TopoCap, the first unified framework capable of extracting motion from monocular video and retargeting it onto characters with arbitrary, unseen skeletal topologies, i.e., from bipeds to hexapods and inanimate objects, without test-time optimization. Our key insight is that while skeletal structures are combinatorial and discrete, the underlying physics of motion occupy a continuous, low-dimensional manifold. We materialize this insight via a two-stage generative pipeline. First, we learn a Universal Motion Manifold using a Graph CVAE that compresses heterogeneous kinematic chains into a shared, fixed-length latent code. By explicitly conditioning the decoder on a structural embedding of the target rig, we disentangle motion dynamics from skeletal topology. Second, we treat video-to-animation as a conditional flow matching problem, predicting these topology-agnostic codes from visual features. To learn this generalized prior, we introduce Mobjaverse, a massive-scale dataset curated from Objaverse-XL. Comprising over 5,000 unique skeletal topologies and 2 million frames, it exceeds the structural diversity of existing datasets by two orders of magnitude. Extensive experiments demonstrate that \MethodMotion outperforms specialist models on human and quadruped benchmarks while enabling zero-shot retargeting for the long tail of 3D creatures. Dataset is publicly available at https://huggingface.co/datasets/duckduckplz/Mobjaverse.

阅读与讨论 → 访问原文 →

探索全球前沿学术脉络