Academic Intelligence · Curated Daily

探索全球前沿学术脉络

AcademicHub 汇聚顶级期刊与预印本平台的实时文献。定制您的专属科研雷达,利用大语言模型自动生成交叉领域文献分析简报。

01.
arXiv (quant-ph) 2026-06-19

Benchmark of quantum algorithms for ground state preparation in the presence of noise

arXiv:2606.20551v1 Announce Type: new Abstract: We compare the performance of representative cooling, adiabatic, and optimization algorithms for ground-state preparation in the presence of noise. Using an exactly solvable family of quadratic fermionic Hamiltonians subject to depolarizing noise, we derive the scaling of the achievable relative energy as a function of the noise rate and support these results with numerical simulations. The Hamiltonian exhibits two phases, separated by a quantum phase transition. As expected, the performance of the different algorithms depends on the phase: adiabatic evolution is favorable in the trivial phase, while a multi-frequency cooling algorithm, as proposed in [1], becomes competitive or superior in the topological phase, where gap-closing limits adiabatic protocols. We further present numerical results for the quantum approximate optimization algorithm [2], showing that it performs competitively with cooling in the trivial phase but is typically outperformed in the topological regime. Finally, we show that for this model the cooling protocol exhibits enhanced robustness to parameter imperfections, highlighting its potential advantage for realistic implementations of noisy quantum state preparation. The analytical approach developed here, in conjunction with numerical validation, establishes an extendable approach to benchmarking ground-state preparation algorithms.

02.
arXiv (CS.CV) 2026-06-15

Prompt2Effect: Training-Free Image-to-Video Model Specialization via LoRA Generation

Personalizing Image-to-Video (I2V) diffusion models with specific visual effects is increasingly demanded for high-end video generation. Current practice requires training a separate Low-Rank Adaptation (LoRA) module for each effect, incurring substantial data curation and iterative optimization costs that hinder interactive control. We present Prompt2Effect, a weight-driven hypernetwork that amortizes per-effect training by directly synthesizing effect-specific LoRA weights in a single forward pass. Unlike prior hypernetworks that regress adapter weights purely from semantics, Prompt2Effect is explicitly conditioned on the frozen base model weights, grounding weight prediction in the structural geometry of each layer. Furthermore, instead of predicting raw LoRA matrices, we introduce an SVD-canonicalized parameterization that resolves factorization ambiguity and stabilizes large-scale weight synthesis. Together, these design principles enable accurate and scalable LoRA prediction for high-dimensional I2V diffusion models. Extensive experiments demonstrate that Prompt2Effect achieves on-par or superior video quality and effect alignment compared to conventional LoRA fine-tuning, while reducing the computational cost from 56 GPU training hours to 3.3 seconds of hypernetwork inference. When used as initialization for subsequent fine-tuning, our predicted weights further improve final performance and accelerate optimization by approximately 10x.

03.
PLOS Computational Biology 2026-06-10

Interpreting higher-order dependence in multimorbidity using cohort data: A partial information decomposition approach

by Cillian Hourican, Geeske Peeters, René J. F. Melis, Almar Kok, Natasja M. van Schoor, Sandra Wezeman, Mike Lees, Marcel G. M. Olde Rikkert, Rick Quax In the context of multimorbidity, clinical features seldom act in isolation: symptoms, signs and behaviours form interdependent systems in which joint effects on function can be demonstrated only when features are considered together. We introduce an open, reusable workflow that detects and interprets these “together-only” interactions using bivariate Partial Information Decomposition (PID; two sources to one target), linking synergy-based dependence to the broader network of clinical variables rather than to a single target. The workflow estimates synergy with small-sample bias correction and summarises each pair in a Breadth–Uniformity–Synergy–Total (BUST) map: breadth of synergy across target variables (broad “generalist” vs narrow “specialist” patterns), cross-stratum uniformity across age, sex and multimorbidity (uniform vs subgroup-specific), synergy strength, and total shared information. Simple diagnostics contrast observed targets with additive expectations, revealing the specific joint configurations through which non-additive effects arise. Applied to data from the Longitudinal Ageing Study Amsterdam, we treated all health-related variables—covering symptoms, clinical signs, behaviours, lifestyle factors, and self-rated health indicators—as both sources and targets in the PID framework. This symmetric design permits synergy to be quantified for every pair of variables with respect to every other variable. The workflow identifies synergistic constellations that additive models miss. Multidomain cliques involving subjective health, pain, cognition and grip strength showed multiple non-additive configurations, whereas pairs such as alcohol use with grip strength exhibited focused, narrow but uniform synergy. Notably, the pairs with the strongest synergistic contributions were largely distinct from those with the highest total mutual information, indicating that synergy captures dependency structure overlooked by conventional association measures. Rather than a new measure, this work provides a bias-aware workflow that makes higher-order dependence visible and transferable. Our results support synergy-aware mapping as a practical complement to conventional multimorbidity analyses: it highlights specific combinations of routinely assessed features whose joint states may be especially informative across multiple health targets and therefore candidates for prioritised joint assessment and future multi-domain intervention studies.

04.
arXiv (CS.LG) 2026-06-15

More with LESS – Local Scene Representations for Tactile Imaging

arXiv:2606.14344v1 Announce Type: new Abstract: Tactile imaging seeks to reconstruct the internal structure of soft objects through touch sensing, with applications in medical diagnosis and robotic manipulation. Recent self-supervised learning approaches have shown promising results, but rely on global, unstructured representations and robot-controlled sensing, limiting generalization and practical use. We propose Local Encoder for Spatial Sensing (LESS), an object-centric tactile representation that exploits the local nature of touch. The tactile scene is modeled as a grid of recurrent encoders with local receptive fields, whose states are fused to reconstruct 2D or 3D images of internal structure. This compositional design enables strong generalization: models trained on single-inclusion phantoms accurately image objects with multiple inclusions and varying sizes. The local structure further supports spatial uncertainty estimation. In addition, we enable hand-held tactile imaging via external pose tracking and human-like palpation data, and extend tactile imaging to full 3D reconstruction.

05.
arXiv (CS.CV) 2026-06-15

Avatar V: Scaling Video-Reference Avatar Video Generation

Generating avatar videos that are not merely visually similar to a target individual but behaviorally recognizable, faithfully reproducing their talking rhythm, gestural tendencies, and expression dynamics, remains an open challenge. Existing methods predominantly condition on single static images, which provide insufficient identity information and cannot capture dynamic motion traits, while standard pixel-level objectives underserve the perceptually critical facial regions that determine avatar fidelity. We present Avatar V, a production-scale framework that addresses these limitations through video-reference-conditioned identity modeling. Rather than compressing identity into fixed-size embeddings, the model conditions directly on the full token sequence of a reference video, learning to reproduce both static identity attributes (facial geometry, skin texture) and dynamic behavioral patterns (talking rhythm, micro-expressions) through attention over the reference context. We introduce Sparse Reference Attention, an asymmetric mechanism achieving linear-complexity conditioning on arbitrarily long references; a motion representation stream enabling closed-loop talking style transfer; and an identity-aware super-resolution refiner inheriting the full reference conditioning. These are supported by a data engine curating 100M+ training clips from 50M raw videos, and a five-stage training pipeline with flow matching pre-training, personality fine-tuning, two-phase distillation (>10x acceleration), and RLHF alignment, deployed across thousands of GPUs. Avatar V generates 1080p videos of unlimited duration, achieving state-of-the-art identity preservation, lip synchronization, and generation quality on our cross-scene benchmark, consistently outperforming leading systems including Seedance 2.0, Kling O3 Pro, Veo 3.1, and OmniHuman 1.5 in both automated metrics and human evaluation.

06.
arXiv (CS.LG) 2026-06-11

REACH: Interpretability-Driven Feature Identification and Architecture Compression for Multi-Channel Vehicular Channel Estimation

arXiv:2606.11857v1 Announce Type: cross Abstract: Multi-channel mixed-SNR training improves out-of-distribution (OOD) generalisation of deep learning channel estimators for IEEE 802.11p vehicular communications, yet the internal mechanism responsible for this remains unexplained. This work presents REACH (Relevance-based Explanation and Architectural Compression for cHannel estimators), a gradient-based interpretability framework that operates at two levels. Input-level attribution identifies a subset of time-frequency features consistently relevant across all evaluated channel conditions, enabling input dimensionality reduction with minimal performance loss. Filter-level attribution reveals a near-universal internal representation, providing a representational account of the observed OOD generalisation. Guided by the resulting filter taxonomy, relevance-guided architecture compression substantially reduces both the number of parameters and the number of floating-point operations (FLOPs) with sub-1 dB normalised mean square error (NMSE) degradation, and OOD generalisation degrades more slowly than within-distribution accuracy under increasing compression.

07.
arXiv (CS.CV) 2026-06-17

DRIVESPATIAL: A Benchmark for Spatiotemporal Intelligence in VLMs for Autonomous Driving

Spatiotemporal intelligence in autonomous driving (AD) requires an agent to integrate multi-view observations into a coherent scene representation, maintain object continuity across viewpoints and time, and reason about spatial relations, interactions, and future dynamics. However, existing AD vision-language benchmarks largely focus on single-view, static, ego-centric, or single-source question answering, leaving it unclear whether current Vision-Language Models (VLMs) can truly construct and reason over dynamic driving scenes. We introduce DriveSpatial, a benchmark of 15.6K human-verified QA pairs across 20 tasks from five large-scale AD datasets. DriveSpatial evaluates four abilities: Cognitive Scene Construction, Multi-view Relational Understanding, Temporal Reasoning, and Generalization. Unlike prior benchmarks, DriveSpatial is generated from a dynamic multi-relational scene graph that encodes object states, spatial relations, interactions, camera visibility, and temporal correspondences, enabling QA pairs that enforce genuine cross-view and spatiotemporal reasoning. Evaluating 15 representative VLMs reveals a substantial human-model gap: the strongest model trails humans by 28.4 points, with Cognitive Scene Construction emerging as the key bottleneck. Further diagnostics show that language-only prompting is insufficient, while explicit BEV grounding consistently improves performance. These results suggest that current VLMs lack the scene-construction ability needed for reliable spatiotemporal driving intelligence. DriveSpatial and its construction pipeline will be released to support future research.

08.
arXiv (CS.CV) 2026-06-16

OneFocus: Enabling Real-World X-ray Security Screening with a Unified Vision-Language Model

X-ray contraband detection is critical for security in large-scale logistics and transportation, yet conventional detectors struggle to adapt to emerging contraband types and lack fundamental visual understanding. Vision-language models (VLMs) offer strong generalization but are hindered by the scarcity of high-quality X-ray image-caption data. To bridge this critical gap, we present MMXray, a meticulously curated benchmark of 52,124 image-caption pairs spanning 28 fine-grained classes of X-ray contraband. To enrich MMXray with realistic occlusion patterns, we further introduce CleanDET, a dedicated synthesis dataset containing clean foreground contraband images from 28 categories and background images with diverse density levels, together with AnyContraSyn, a controllable synthesis method designed to operate on CleanDET. We also develop OnePipe, an extensible pipeline for systematic data curation. Built on MMXray, we propose OneFocus, a unified VLM that supports four core tasks: visual question answering, contraband localization, classification, and image understanding. OneFocus achieves state-of-the-art performance in X-ray contraband understanding and demonstrates robust cross-domain generalization, establishing a strong vision-language baseline for security screening.

09.
arXiv (CS.CV) 2026-06-12

Why Commodity WiFi Sensors Fail at Multi-Person Gait Identification: A Systematic Analysis Using ESP32

WiFi Channel State Information (CSI) has shown promise for single-person gait identification, raising interest in its use for contactless biometrics, continuous authentication, and passive identification. However, the feasibility of multi-person identification on low-cost commodity devices remains unclear. A critical question is whether weak multi-person performance is primarily an algorithmic limitation, or whether it reflects a more fundamental sensing ceiling on commodity WiFi hardware. We address this question through a systematic empirical study using commodity ESP32 WiFi sensors. We evaluated six different signal separation methods–FastICA, SOBI, PCA-ICA, NMF, Wavelet, and Tensor decomposition–across seven scenarios spanning 1-10 people in both controlled and realistic indoor environments. To investigate beyond classification accuracy, we introduce three diagnostic metrics: intra-subject variability (ISV), inter-subject distinguishability (ISD), and performance degradation rate (PDR). In all methods, performance remains moderate (39%-56% accuracy), with limited evidence that algorithmic choice alone solves the problem. The best-performing method, NMF, reaches 56% accuracy, while all methods exhibit extremely high feature-space overlap (97%-99%), unstable within-subject representations, and marked environmental sensitivity. These findings suggest that, under commodity ESP32 CSI constraints, dense multi-person gait identification is limited more by sensing quality and spatial diversity than by the chosen separation algorithm. Our results have direct implications for security and privacy: they call into question the practicality of commodity WiFi CSI as a robust multi-user biometric primitive for authentication, while also placing important bounds on the passive identification capabilities achievable with low-cost off-the-shelf WiFi hardware.

10.
arXiv (quant-ph) 2026-06-16

Benchmarking Quantum Computers via Protocols, Comparing IBM's Heron vs IBM's Eagle

arXiv:2603.04377v3 Announce Type: replace Abstract: As quantum computing hardware rapidly advances, objectively evaluating the capabilities and error rates of new processors remains a critical challenge for the field. A clear and realistic understanding of current quantum performance is essential for guiding research priorities and driving meaningful progress. In this work, we apply and extend a protocol-based benchmarking methodology (Meirom, Mor, Weinstein Arxiv 2505.12441) that utilizes well-defined \underline{quantumness} thresholds. By evaluating performance at protocol level rather than the gate level, this approach provides a transparent and intuitive assessment of whether specific quantum processors, or isolated sub-chips within them, can demonstrate a practical quantum advantage. To illustrate the utility of this method, we compare two generations of IBM quantum computers: the older Eagle architecture and the newer Heron architecture. Our findings reveal the genuine operational strengths and limitations of these devices, demonstrating substantial performance improvements in the newer Heron generation. This work was made possible by IBM Quantum policies that enable independent and objective assessment of its quantum computers and sub-chips. We strongly encourage other companies to emulate the independent qubit availability and the fair pricing that allow researchers to perform such assessments.

11.
arXiv (CS.LG) 2026-06-17

Operator Boosting Produces Pareto-Efficient PDE Surrogates

arXiv:2606.17460v1 Announce Type: new Abstract: Neural operators are widely used as surrogate solution maps for partial differential equations (PDEs), but full-size models can be costly to store, deploy, and evaluate in many-query scientific workflows. This work introduces Operator Boosting, a stagewise residual-learning framework for constructing compact neural-operator surrogates directly, rather than training a large model and compressing it afterward. Starting from the empirical mean predictor in normalized output coordinates, the method trains a sequence of tiny same-family neural operators on residual fields and incorporates each correction through validation-selected shrinkage. We instantiate the framework with Fourier neural operators (FNOs), DeepONets, and convolutional neural operators (CNOs), and compare boosted tiny stacks against full-size monolithic baselines across one-, two-, and three-dimensional PDE benchmarks from PDEBench, APEBench, and The Well. Across 30 dataset-architecture pairs, 21 show positive mean accuracy gains and 17 have positive confidence intervals, while all boosted stacks reduce trainable parameter count by approximately 72-95%. Best-model comparisons show empirical Pareto improvements on 7 of 10 completed PDE benchmarks, including two-dimensional Navier-Stokes, shallow-water dynamics, Darcy flow, one-dimensional transport and reaction systems, and three-dimensional compressible Navier-Stokes. These results show that Operator Boosting often improves the empirical accuracy-parameter Pareto frontier of neural PDE surrogates, while also exposing PDE- and architecture-dependent regimes where residual boosting fails to offset compression.

12.
arXiv (quant-ph) 2026-06-11

Quantum optimal control of the Dicke manifold in dipolar Rydberg atom arrays

arXiv:2606.02283v2 Announce Type: replace Abstract: The ability to engineer and control quantum states of many-body systems is a central challenge in quantum information science. For a register of $N$ qubits, the full Hilbert space dimension grows exponentially as $2^N$, rendering generic state preparation and control infeasible without exploiting structure or symmetry. A particularly important and physically motivated restriction is to the fully symmetric subspace, spanned by the Dicke states, which are simultaneous eigenstates of collective spin $J=N/2$. Ensembles of Rydberg atoms interacting via electric dipoles in two-dimensional tweezer arrays form a promising platform for achieving such control. However, the finite range of dipole-dipole interactions poses a challenge to generating and controlling the Dicke manifold because the Hamiltonian incurs leakage from the computational subspace. To counteract this leakage, we perform quantum optimal control algorithms on a truncated Hilbert space according to our newly developed method of ``irrep distillation'' (IRD), which captures the process by which the symmetric subspace couples to leakage error-spaces, using only linear-scaling Hilbert dimension. We implement gradient ascent pulse engineering (GrAPE) on control schemes with little or no local addressing, to generate resourceful states like Greenberger-Horne-Zeilinger, Dicke, and extremal quantum states. We benchmark each scheme of IRD-GrAPE for its quantum speed limit (QSL), as well as exactly testing pulse fidelities on small system sizes and predicting fidelities using higher-order IRD on larger systems.

13.
arXiv (CS.CV) 2026-06-18

Splaxel: Efficient Distributed Training of 3D Gaussian Splatting for Large-scale Scene Reconstruction via Pixel-level Communication

3D Gaussian Splatting (3DGS) enables high-fidelity and real-time 3D scene reconstruction, but scaling training to large-scale scenes requires optimizing hundreds of millions of Gaussians across multiple GPUs. Existing distributed approaches either partition scenes into isolated regions, causing global inconsistency, or rely on global Gaussian-level exchanges, which lead to substantial growth in inter-GPU communication and quickly dominate iteration time. We propose Splaxel, a communication-efficient distributed 3DGS training framework based on pixel-level local rendering and global composition. Instead of synchronizing Gaussians, each GPU renders its local subset and exchanges only partial pixel values, maintaining mathematical consistency while keeping communication cost stable as the scene size increases. Splaxel further reduces pixel-level redundancy through geometric and transmittance visibility prediction and improves GPU utilization via conflict-free camera-view consolidation. Evaluated on large-scale datasets with up to 120M Gaussians, Splaxel achieves up to 7.6$\times$ speedup over the state-of-the-art distributed 3DGS framework while preserving high reconstruction quality.

14.
arXiv (quant-ph) 2026-06-15

Extending Covariant Fluctuation Theorems into Quantum Regime through Quasiprobability Approach

arXiv:2606.14519v1 Announce Type: cross Abstract: The covariant formulation of stochastic thermodynamics requires treating the stochastic work as a 4-vector, posing significant challenges for quantum systems due to the non-commutativity. We introduce a new quasiprobability distribution for the work 4-vector, which combines the Wigner and Margenau-Hill quasiprobabilities. This extends the covariant fluctuation theorems from classical to quantum regime. We illustrate our findings with a scalar field driven by classical particles with a generalized version of trace formula. Our work establishes a quasiprobability approach to studying relativistic quantum thermodynamics in a covariant way.

15.
arXiv (CS.LG) 2026-06-16

CacheMuon: Using Temporal Preconditioning To Approximate Polar Factor

arXiv:2606.16371v1 Announce Type: new Abstract: Muon is an optimizer that computes updates using the polar factor of the momentum matrix and has shown strong empirical performance across a range of training settings. A key component of Muon is the Newton-Schulz iteration used to compute this polar factor. Although this avoids the cost of an exact singular value decomposition, it remains expensive in practice because it is applied at every optimization step. At the same time, the momentum matrix changes smoothly over training, suggesting strong temporal correlation in the corresponding polar factors. In this paper, we exploit this structure and propose CacheMuon, a temporal preconditioning method that reuses information from previous optimization steps to approximate the polar factor at the current step. This reduces redundant orthogonalization computation across iterations. We analyze CacheMuon as an inexact Muon update, with error controlled by fresh-solver error and cache staleness. Empirically, CacheMuon provides a controllable quality-efficiency frontier: conservative thresholds closely match fresh Muon on language-model and vision training while reducing orthogonalization FLOPs, whereas more aggressive thresholds yield larger arithmetic savings at the cost of modest validation-quality degradation.

16.
arXiv (CS.CL) 2026-06-16

Dealing with Annotator Disagreement in Hate Speech Classification

Hate speech detection is a crucial task, especially on social media where harmful content can spread quickly. Collecting social media content (tweets etc.) to train machine learning models is easy, but detecting and categorizing hate speech can be difficult due to the inherently subjective nature. This subjectivity leads to frequent disagreement among annotators, particularly for subtle or borderline content. Traditional approaches either discard non-consensus samples or force a ''gold standard'' through expert adjudication, ignoring valuable information about uncertainty and diverse human perspectives. We examine the largely overlooked problem of annotator disagreement in hate speech classification and evaluate a range of aggregation methods, including majority voting, ordinal strategies (minimum, maximum, and mean), and analyze their impact across binary, 4-class, and 6-class classification tasks. In addition, we leverage annotators' perceived hate speech strength scores to explore regression-based and hybrid modeling approaches. Among others, we show that filtering non-consensus samples results in over-optimistic results and that the perceived strength provides a complementary signal that enhance classification performance. Finally, we establish new state-of-the-art results for hate speech detection in Turkish tweets, and demonstrate that annotator disagreement, when properly modeled, is a valuable resource for building more robust and reliable systems.

17.
arXiv (CS.LG) 2026-06-19

Direct Advantage Estimation for Scalable and Sample-efficient Deep Reinforcement Learning

arXiv:2606.20411v1 Announce Type: new Abstract: Direct Advantage Estimation (DAE) has been shown to improve the sample efficiency of deep reinforcement learning algorithms. However, its reliance on full environment observability limits its applicability in realistic settings, and its requirement to model transition probabilities incurs substantial computational overhead for high-dimensional observations. In the present work, we address both limitations. First, we extend the theoretical framework of DAE to partially observable domains with minimal modifications. Second, we reduce its computational complexity by introducing discrete latent dynamics models that efficiently approximate transition probabilities. We evaluate our approach on the Arcade Learning Environment and find that DAE scales effectively with function approximator capacity while retaining high sample efficiency.

18.
arXiv (math.PR) 2026-06-12

Diffusion approximations for interacting stochastic systems with reflection and control

arXiv:2601.05895v2 Announce Type: replace Abstract: We study diffusion approximations for a class of interacting stochastic systems with reflection and control. Motivated by interacting stochastic dynamics subject to feedback mechanisms and boundary constraints, we consider diffusion-scaled stochastic processes incorporating stochastic fluctuations, state-dependent interactions, and reflection. Under suitable assumptions, we establish convergence in distribution of the scaled processes to systems of interacting reflected stochastic differential equations of Ornstein-Uhlenbeck type. The limiting dynamics capture key features of constrained multi-agent systems, including mean-reverting behavior, interaction effects, and confinement within bounded domains through Skorokhod reflection. The analysis combines diffusion-scaling arguments, stability estimates, and continuity properties of the Skorokhod map to connect discrete stochastic systems with their reflected diffusion limits. To illustrate the framework, we present numerical examples motivated by crowd dynamics and neural population dynamics. The simulations demonstrate qualitative agreement between the finite stochastic systems and the corresponding reflected diffusion models and illustrate how diffusion approximations can provide tractable descriptions of interacting stochastic systems with constraints.

19.
arXiv (quant-ph) 2026-06-19

Strain- and Electric-Field-Tunable Valley Polarization in Mo0.75V0.25Te2(Mo3VTe8) for Valleytronic Application

arXiv:2606.19954v1 Announce Type: cross Abstract: Valley polarization in 2D TMDs is promising for low-power valleytronic and spin-valley information processing, but time-reversal symmetry in pristine nonmagnetic TMDs keeps the K+ and K- valleys degenerate, limiting device applications. In this work, we investigated the structural stability, electronic properties, and tunable valley polarization of V-alloyed MoTe2 monolayer, Mo0.75V0.25Te2, using first-principles density functional theory (DFT) calculations. Substitutional alloying of MoTe2 with V introduced magnetic exchange interaction, which, together with spin-orbit coupling (SOC), lifted the valley degeneracy at the unequal valleys. The alloyed structure was found to be energetically and dynamically stable due to the absence of imaginary phonon modes. In pristine MoTe2, SOC produced spin splittings of 34.0 meV and 218.9 meV in the conduction bands and valence bands, respectively, but no valley polarization was observed. In contrast, Mo0.75V0.25Te2 exhibited spontaneous valley polarization of 37.3 meV in the conduction band and 78.2 meV in the valence band. The valley polarization was further enhanced by external electric fields and biaxial strain. A transverse electric field along the crystal c axis produced the maximum valley splitting of 132.8 meV in the valence band, whereas biaxial tensile strain increased the valence band valley splitting up to 160.8 meV. The maximum conduction band valley splitting reached 54.4 meV under 2% biaxial compressive strain. These results demonstrated that V alloying, combined with electric-field and strain engineering, provides an effective strategy for achieving large and tunable valley polarization in MoTe2. Thus, Mo0.75V0.25Te2 can be considered a promising 2D platform for tunable valleytronic device applications, such as transistors and sensors.

20.
arXiv (CS.CV) 2026-06-17

Two-Stage Fine-Tuning of ResNet50 for High-Sensitivity Melanoma Detection on Dermoscopic Images

作者:

Melanoma is the most dangerous form of skin cancer with five-year survival rates exceeding 99% when detected early but falling sharply once the disease spreads. This paper proposes and evaluates a two-stage fine-tuning approach for ResNet50 applied to binary melanoma classification on dermoscopic images. The core challenges addressed are class imbalance and suboptimal transfer learning from single-stage fine-tuning. After stratified train/validation/test splitting, random oversampling was applied exclusively to the training set to achieve a 1:1 class balance. Stage 1 trained only the classification head with the ResNet50 base frozen, while Stage 2 fine-tuned all layers jointly at a low learning rate of 1e-5 to prevent catastrophic forgetting of learned visual features. On an independent test set of 3,826 images, the model achieved an AUC-ROC of 0.9559, accuracy of 88.34%, sensitivity of 87.56%, specificity of 89.13%, and F1-score of 88.29%. An ablation study confirms the two-stage protocol significantly outperforms single-stage fine-tuning, with sensitivity gains of over 4%. Grad-CAM visualizations demonstrate correct lesion localization. A fully deployable Streamlit detection application is provided alongside all training code.

21.
arXiv (CS.AI) 2026-06-15

FactoryLLM: A Safe and Open-Source AI Playground for Evaluating LLMs in Smart Factories

arXiv:2606.14119v1 Announce Type: new Abstract: Fault diagnostics and recovery in smart factories is challenging because critical information is dispersed across manuals of multiple machines which are interconnected through the manufacturing process. Large Language Models (LLMs) can provide a promising approach. In this paper, we propose FactoryLLM, a safe and open-source AI playground designed for evaluating different LLM-based retrieval-augmented generation (RAG) models by analysing documents from multiple machines across the manufacturing process. FactoryLLM enables the user to configure the LLM, and assess performance when reasoning over multiple documents, through a dual evaluation setup using both RAGAS and NVIDIA's LLM-as-a-Judge metrics. FactoryLLM is safe because it allows users to run local or open-source LLMs without sharing sensitive industrial data, providing a controlled environment for experimentation. We demonstrate the efficacy of FactoryLLM through a case study which involves an Autonomous Intelligent Vehicle and its Mobile Planner software, evaluating three LLMs across 30 maintenance queries derived from approximately 600 pages of cross-machine documentation. The results suggest that FactoryLLM is effective in cross-machine document reasoning: every model achieved a groundedness score above 0.88. The full code and documentation for community to test FactoryLLM with their manufacturing specific scenarios are publicly available.

22.
arXiv (CS.CV) 2026-06-11

RankVR: Low-Rank Structure Perception and Value Recalibration for Robust Composed Image Retrieval

Composed Image Retrieval (CIR) constitutes a pivotal paradigm requiring models to perform joint reasoning on reference images and modification texts. However, the prevalence of Noisy Triplet Correspondence (NTC) in large-scale datasets severely constrains model performance. Existing denoising methods either target binary mismatches or rely on scalar-based point-wise estimation, neglecting rich global structural correlations among sample populations and dynamic value variations during training, thereby yielding suboptimal results. This paper identifies two critical unresolved challenges: Global Structural Inconsistency of Semantic Correlations and Hard Sample Discrimination Uncertainty. To address these, we propose RankVR, a framework designed to construct a robust CIR model via global structure consistency and dynamic value perception. Specifically, we introduce the Global Structure Consistency Perception (GSCP) module, which utilizes the Effective Rank of the Correlation Matrix to decouple clean samples from structural noise. By measuring rank difference, GSCP identifies samples disrupting macroscopic semantic symmetry. Furthermore, we develop the Adaptive Semantic Value Calibration (ASVC) module to distinguish high-value hard clean samples. By integrating training potential and reliability, it dynamically quantifies the semantic value of each triplet, ensuring effective utilization of hard samples while suppressing noise characterized by logical conflicts. Extensive experiments on the FashionIQ and CIRR benchmark datasets demonstrate that RankVR significantly outperforms existing state-of-the-art methods, validating its superior robustness in noisy environments.

23.
arXiv (CS.LG) 2026-06-18

On Local Population-Risk Certificates

作者:

arXiv:2606.19147v1 Announce Type: cross Abstract: This paper develops local certificates for population-risk increments around a current model. For a local candidate set \(\mathcal D\), the certificate is a two-sided confidence band for \(P({\ell_{\theta+v}-\ell_\theta})\) over \(v\in\mathcal D\). As an application, the upper endpoint of this band yields a risk-controlled update rule: an update is accepted only when its certified upper endpoint is nonpositive; otherwise the current model is retained.

24.
arXiv (CS.CL) 2026-06-18

RegMix-D: Dynamic Data Mixing via Proxy Training Trajectories

Data mixture selection is critical for Large Language Model pretraining. Existing methods such as RegMix select a single static mixture by fitting a regression model on small-scale proxy runs. We propose RegMix-D, a simple extension of RegMix to dynamic mixing. Our key observation is that proxy runs produce not only endpoint losses, but also full loss trajectories, which can be used to further improve data mixture. By training regression model on these trajectories, we can predict optimal mixtures at multiple training stages. RegMix-D supports two deployment modes: an offline variant that generates a complete mixture schedule before target training, and an online variant that adapts the mixture during training using observed loss. Experiments on 25B tokens of the Pile dataset with a 1B parameter target model show that RegMix-D consistently improves over RegMix and DoReMi across 13 downstream tasks while remaining proxy-efficient: it surpasses RegMix even with only 128 proxy models (25% of RegMix's proxy compute budget).