Academic Intelligence · Curated Daily

探索全球前沿学术脉络

AcademicHub 汇聚顶级期刊与预印本平台的实时文献。定制您的专属科研雷达,利用大语言模型自动生成交叉领域文献分析简报。

01.
arXiv (CS.CL) 2026-06-12

How reliable are LLMs when it comes to playing dice?

We investigate the probabilistic reasoning capabilities of large language models through a controlled benchmarking study on discrete probability problems. We constructed two datasets, respectively a set of standard exercises and a set of counterintuitive exercises, designed to trigger heuristic reasoning, and evaluated 8 state-of-the-art models, each tested with and without Chain-of-Thought prompting. Models achieve an average accuracy of 0.96 on standard problems but only 0.59 on counterintuitive ones. We further provide empirical evidence of token bias: performance drops by over 20% when canonical formulations are replaced by disguised variants. Embedding misleading suggestions in the prompt reduces performance by up to 34%, with no model proving immune. Taken together, the reported findings suggest that current LLMs are not yet genuine probabilistic reasoners, despite their success in advanced mathematical problems.

02.
medRxiv (Medicine) 2026-06-17

Cost-effectiveness of measles rapid diagnostic tests for replacing or expanding laboratory testing in Ethiopia

Background: In low- and middle-income countries, laboratory testing to rapidly detect measles outbreaks is limited by infrastructure availability and high costs. This study estimates the potential impact and cost-effectiveness of measles rapid diagnostic tests (RDTs) if implemented nationally in Ethiopia to either replace or expand current testing. Methods: An agent-based model to simulate measles outbreaks was calibrated to Ethiopian measles surveillance data. Modelled outbreak outcomes were aggregated over a 10-year period. Scenarios included using RDTs to (1) replace laboratory testing; (2) replace epidemiological linkage; and (3) increase case detection, in addition to replacing laboratory testing and epidemiological linkage. Testing and outbreak response costs (in 2025 US$) were obtained from Ethiopian Public Health Institute from a government perspective. Total costs and disability-adjusted life years (DALYs) for each scenario were compared to baseline. Results: All scenarios were cost saving compared to baseline. Replacing laboratory testing with RDTs saved US$4.2M (3.2M-4.9M) over 10-years, but due to very low testing rates the benefits of eliminating laboratory testing delays were offset by missed cases from the lower RDT sensitivity, leading to similar outbreak detection times and DALYs. Replacing epidemiological linkage with RDTs had similar DALYs but increased the cost savings to US$9.7M. Using RDTs to double case detection reduced outbreak detection time from 113 to 80 days, averted 17,000 DALYs, and saved US$4.3M. Conclusions: In Ethiopia, use of measles RDTs could be cost saving, and if used to expand testing could prevent measles infections through faster outbreak detection and response.

03.
arXiv (CS.LG) 2026-06-16

On the Energy Distribution of the Galactic Center Excess' Sources

arXiv:2507.17804v2 Announce Type: replace-cross Abstract: The Galactic Center Excess (GCE) may yet herald the discovery of annihilating dark matter. Weighing against that conclusion are analyses showing evidence for dim point sources within the spatial structure of the emission. Due to technical limitations these analyses are purely spatial with all spectral information that could disentangle the excess from astrophysical backgrounds discarded. Here, we demonstrate that a neural network simulation-based inference approach can jointly analyze the spatial and spectra data. The addition is profound: energy information drives the putative point sources to be significantly dimmer, indicating either the GCE is truly diffuse in nature or made of an exceptionally large number of sources. Quantitatively, for our best fit background model, the excess is essentially consistent with Poisson emission as predicted by dark matter. If due to point sources, our median prediction is $\mathcal{O}(10^5)$ sources, or more than 35,000 at 90\% confidence, both orders of magnitude larger than the hundreds preferred by earlier point-source analyses of the GCE, although variations allowed by background systematics could reduce the required number of sources by roughly an order of magnitude.

04.
arXiv (CS.CV) 2026-06-15

VideoWeave: Unlocking Geometric Consistency in Video Generation via Joint Geometry-Video Modeling

Large-scale video diffusion models often fail to preserve 3D structure over time, causing geometric drift and implausible motion under viewpoint changes. Existing methods usually enforce geometric consistency by using explicit geometry reconstructions, such as depth maps, point clouds, or reconstructed 3D structures, to define conditions, supervision, or reward signals, making the generator sensitive to errors from upstream geometry pipelines. We propose VideoWeave, a latent-space post-training framework that uses implicit geometry-model features to constrain the generative distribution, providing a more flexible and non-rigid form of guidance that mitigates the impact of reconstruction errors from geometry models. Specifically, VideoWeave adapts these features into geometry latents and jointly models them with video latents in a shared denoising space, allowing geometry to shape the generative distribution during training. To support this process, we build GeoVid-80K, an 80K-video dataset with paired appearance and geometry representations. Experiments on text-to-video and image-to-video generation show that VideoWeave improves geometric coherence while preserving strong visual quality. VideoWeave project page at https://videoweave.github.io/

05.
arXiv (CS.LG) 2026-06-19

BLISS: A Lightweight Bilevel Influence Scoring Method for Data Selection in Language Model Pretraining

arXiv:2510.06048v5 Announce Type: replace Abstract: Effective data selection is essential for pretraining large language models (LLMs), enhancing efficiency and improving generalization to downstream tasks. However, existing approaches often require leveraging external pretrained models, making it difficult to disentangle the effects of data selection from those of the external pretrained models. In addition, they often overlook the long-term impact of selected data if the model is trained to convergence, primarily due to the prohibitive cost of full-scale LLM pretraining. In this paper, we introduce BLISS (BileveL Influence Scoring method for data Selection): a lightweight data selection method that operates entirely from scratch, without relying on any external pretrained oracle models, while explicitly accounting for the long-term impact of selected data. BLISS leverages a small proxy model as a surrogate for the LLM and employs a score model to estimate the long-term influence of training samples if the proxy model is trained to convergence. We formulate data selection as a bilevel optimization problem, where the upper-level objective optimizes the score model to assign importance weights to training samples, ensuring that minimizing the lower-level objective (i.e., training the proxy model over the weighted training loss until convergence) leads to best validation performance. Once optimized, the trained score model predicts influence scores for the dataset, enabling efficient selection of high-quality samples for LLM pretraining. We validate BLISS by pretraining 410M/1B/2.8B Pythia and LLaMA-0.5B models on selected subsets of the C4 dataset. Notably, under the 1B model setting, BLISS achieves $1.7\times$ speedup in reaching the same performance as the state-of-the-art method, demonstrating superior performance across multiple downstream tasks.

06.
arXiv (CS.CV) 2026-06-15

LiAuto-GeoX: Efficient Grounded Driving Transformer

Dense 3D reconstruction has demonstrated immense potential for spatial understanding, yet its viability as a real-time, onboard representation for autonomous driving remains an open challenge. Existing large-scale visual geometry models typically require substantial computational resources and lack the long-range geometric fidelity, surround-view consistency, and real-time efficiency demanded by dynamic driving environments. To bridge this gap, we present LiAuto-GeoX, an efficient grounded driving transformer designed for deployable, ego-centric 3D scene understanding. Our approach begins by learning a high-capacity driving geometry model from large-scale surround-view data, utilizing sparse LiDAR priors to provide robust geometric grounding in distant, ambiguous, or structure-sparse regions. We then instantiate this capability into a highly compact 155M-parameter onboard model through a novel geometry-preserving distillation framework. This framework employs mask-guided depth-aware distillation to retain fine-grained metric structures by emphasizing geometrically informative regions, and relative-pose relational distillation to enforce cross-view spatial consistency through pose-induced geometric relations. Extensive evaluations reveal that LiAuto-GeoX runs at 220 FPS on KITTI while maintaining high-fidelity dense reconstruction, enabling real-time deployment. The learned geometry transfers seamlessly to downstream autonomy tasks, achieving 90.6 PDMS in trajectory prediction, 24.63 mIoU in occupancy prediction, and 47.67 IoU in future-frame prediction. These all demonstrate that efficient dense 3D reconstruction can transcend its traditional role as a perception target to serve as a scalable, foundational geometric representation for next-generation autonomous driving.

07.
arXiv (CS.CV) 2026-06-16

PPDM: Pixel Puzzling Diffusion Model for Speed and Memory Efficient Volumetric Medical Image Translation

Diffusion models have demonstrated superior fidelity for medical image-to-image translation, but their extension to high-resolution 3D volumes is severely constrained by prohibitive computational cost and GPU memory requirements. Existing memory-efficient strategies often compromise global volumetric consistency or fine anatomical detail. In this work, we propose the Pixel Puzzling Diffusion Model (PPDM), a simple and effective framework for memory- and speed-efficient 3D medical image translation. PPDM introduces a reversible pixel puzzle-unpuzzle operator that trades spatial resolution for channel dimensionality, substantially reducing activation memory while preserving global context. To further improve efficiency and stability, we adopt a direct bridge diffusion formulation that starts from the conditional input rather than pure noise, enabling the model to focus on task-relevant residuals. In addition, a puzzle-gradient loss is incorporated to enforce spatial coherence and suppress grid-like artifacts introduced by spatial rearrangement. We evaluate PPDM on multiple challenging 3D medical image translation tasks, including low-count PET denoising, joint PET denoising and attenuation correction, and cross-modal MRI translation. Across all tasks, PPDM consistently matches or outperforms full 3D diffusion models while reducing training GPU memory usage by up to an order of magnitude and significantly accelerating inference, and it outperforms existing memory-efficient diffusion approaches based on latent compression or frequency decomposition. These results demonstrate that PPDM provides a practical and scalable solution for high-fidelity 3D diffusion-based medical image translation under limited computational resources.

08.
arXiv (CS.CL) 2026-06-18

Depth-Width tradeoffs in Algorithmic Reasoning of Graph Tasks with Transformers

Transformers have revolutionized the field of machine learning. In particular, they can be used to solve complex algorithmic problems, including graph-based tasks. In such algorithmic tasks a key question is what is the minimal size of a transformer that can implement the task. Recent work has begun to explore this problem for graph-based tasks, showing that for sub-linear embedding dimension (i.e., model width) logarithmic depth suffices. However, an open question, which we address here, is what happens if width is allowed to grow linearly, while depth is kept fixed. Here we analyze this setting, and provide the surprising result that with linear width, constant depth suffices for solving a host of graph-based problems. This suggests that a moderate increase in width can allow much shallower models, which are advantageous in terms of inference and train time. For other problems, we show that quadratic width is required. Our results demonstrate the complex and intriguing landscape of transformer implementations of graph-based algorithms. We empirically investigate these trade-offs between the relative powers of depth and width and find tasks where wider models have the same accuracy as deep models, while having much faster train and inference time due to parallelizable hardware.

09.
arXiv (quant-ph) 2026-06-11

Isotropic random walks and Brownian diffusion on complex projective space

arXiv:2606.11438v1 Announce Type: new Abstract: We show that isotropic random walks on the complex projective space provide a canonical and analytically tractable stochastic-geometric framework for the exploration of quantum-state space. The approach combines harmonic analysis on compact rank-one symmetric spaces with stochastic pure-state evolution and yields explicit analytical expressions for transition kernels, fidelity statistics, and geometric observables associated with the Fubini–Study metric. In particular, the framework provides a solvable reference model for isotropic depolarization and Haar equilibration, reproducing Haar-random fidelity statistics and the invariant measure on projective Hilbert space without specifying a microscopic Lindblad generator. In the short-time regime, the stochastic evolution converges to Brownian diffusion generated by the Fubini–Study Laplace–Beltrami operator, while the long-time limit exhibits concentration-of-measure behaviour characteristic of high-dimensional random quantum states. We further derive analytical and asymptotic results for the first-passage-time problem, including closed-form expressions in the Brownian limit for the mean first passage time and the long-time tail of the first-passage-time distribution. For high-fidelity target states, the mean first passage time exhibits a strong dimension-dependent divergence originating from the concentration properties of the Fubini–Study geometry.

10.
arXiv (CS.LG) 2026-06-15

A General Framework for Decision Trees via Bregman Divergences

arXiv:2606.13984v1 Announce Type: cross Abstract: Decision trees are one of the fundamental tools in statistical learning due to their interpretability, flexibility, and their ability to adapt to nonlinear structures. Among them, the Classification and Regression Trees, introduced by Breiman, Friedman, Olshen, and Stone in 1984, became one of the most influential algorithms and remains one of the most widely used methods for classification and regression problems. On the other hand, Bregman divergences, introduced by Lev Bregman in 1967 in the context of convex optimization, provide a broad family of loss functions that naturally generalize the squared Euclidean distance. This family includes, among others, the Kullback-Leibler divergence, the Poisson divergence, and the Itakura-Saito divergence, as well as several losses associated with distributions belonging to the exponential family. Moreover, Bregman divergences possess a rich geometric structure and deep connections with convex analysis and information geometry. In this work, we propose a generalization of the CART paradigm based on Bregman divergences, thereby obtaining a broader family of decision trees adapted to different statistical models and underlying geometries. Although algorithms such as CART or classical implementations such as rpart incorporate different impurity criteria, these are usually introduced in an ad hoc manner for each specific model. In contrast, the Bregman divergence approach provides a unified framework that allows these criteria to be derived and interpreted from common convex and geometric principles. Beyond the algorithmic construction, we also investigate theoretical properties of these trees. In particular, we study how properties of the generating convex function – such as strong convexity or smoothness – influence impurity gains between parent and child nodes, as well as stability and consistency properties of the estimator.

11.
arXiv (math.PR) 2026-06-16

Probabilities

arXiv:2601.18853v4 Announce Type: replace-cross Abstract: Probabilities is the English translation of the book Probabilités Tome 1 and Tome 2. The mathematic content is authored by Prof. Jean-Yves Ouvrard. The English version has been done by his eldest son Dr. Xavier Ouvrard. This probability theory book covers not only an introduction to this field, but also advanced concepts based on measure theory. The first part introduces the fundamentals of probability theory across 7 chapters, targeting bachelor level, including event algebras, random variables, independence, conditional probabilities, moments of discrete and continuous random variables, generating functions, and limit theorems. The second part contains 10 chapters and corresponds to master level. Following a brief introduction to measure theory, this part develops more advanced topics: probability measures and their complements, distributions and moments of random variables, modes of convergence, laws of large numbers, conditional expectation, Fourier transforms and characteristic functions, Gaussian random variables, convergence of measures, convergence in distribution, discrete-time stochastic processes, martingales, and Markov chains. The reader's work is greatly facilitated by the inclusion, in every chapter, of numerous exercises, all accompanied by detailed solutions that often provide substantial extensions to the theoretical material.

12.
medRxiv (Medicine) 2026-06-22

Integration of lung tissue proteomics and genome-wide association data to identify lung cancer susceptibility proteins and potential drug targets

Background: Proteins directly impact disease development and act as drug targets. Therefore, we integrated genomic and lung tissue proteomics data to identify lung cancer susceptibility proteins, elucidating genetic mechanisms and candidate drug targets. Method: We profiled the proteome and genome in non-neoplastic lung tissue from 200 lung cancer patients. Using this data, we constructed genetic models to predict abundance across the proteome in lung tissue. We applied these models to genome-wide association study (GWAS) data from 55,174 lung cancer cases and 1,294,174 controls to evaluate their associations with the risk of lung cancer, overall and by major histological subtypes. Bayesian colocalization and Mendelian randomization (MR) analyses were used to prioritize putative causal proteins, which were cross-referenced with three main drug-protein databases to identify potential therapeutic targets. Results: We identified 29 proteins associated with lung cancer risk at a false discovery rate < 5%, including 25 for overall lung cancer, two (AQP3 and IL18) specifically for adenocarcinoma, and another two (HMGN2 and HLA-DMB) for squamous cell carcinoma. Of them, genes encoding 17 proteins reside at least 2Mb away from any known GWAS risk loci, including 14 for overall lung cancer (HYI, GPX1, GMPPB, DSP, HDDC2, MTCH2, SUOX, JMJD7, PDIA3, IL16, IQGAP1, SULT1A2, ARHGAP27, and TYMP) and three for subtypes (AQP3, IL18, and HMGN2). Among the 12 proteins located within the known risk loci, EPHX2, CLDN18, PSMD5, and CYP2S1 proteins showed an association independent of the proximal GWAS-identified lead variant. Colocalization and/or MR analysis suggested 11 potential causal proteins. Five of these candidate causal proteins (DSP, CLDN18, IQGAP1, IL18 and TYMP) are targeted by nine drugs already approved by the FDA or in phase III trials. Conclusion: Our study identified novel lung cancer susceptibility proteins and potential drug targets, offering valuable insights into lung cancer biology and future translational utilities.

13.
arXiv (CS.CL) 2026-06-12

Influcoder: Distilling Decoders' Gradient Influence Rankings into an Encoder for Data Attribution

With the growth of LLMs' (Large Language Models) capabilities, there has been an increasing push to curate high quality datasets by filtering samples in the training data. In general, Data Attribution (DA) methods aim to estimate how individual samples in a training dataset can precondition a model to generate certain outputs. As an example, one might be interested in which samples in the data could be the source of toxic behavior after training the LLM. Many methods quantify this conditioning through the paradigm of influence functions. While methods of this family are effective in its function, they lack the necessary processing speed and storage compactness to be practically implemented on large datasets. We propose a method, Influcoder, as a quick and cost-effective approach to influence-based Data Attribution at scale.

14.
arXiv (quant-ph) 2026-06-17

Tunneling Dynamics and Time Delay in Electron Transport through Time-Dependent Barriers with Finite-Bandwidth Reservoirs

arXiv:2507.20649v2 Announce Type: replace-cross Abstract: We study a model system consisting of a tunneling barrier driven by an external harmonic field and coupled to two leads with finite bandwidth. Avoiding Floquet expansions, we derive simple expressions for the time-dependent tunneling current in the adiabatic regime. Our approach relates the barrier modulation to a measurable time delay in the steady-state periodic current. It provides a physically consistent definition of the tunneling time inside the barrier by subtracting the time delay associated with the leads from the total time delay. We find that the tunneling time always vanishes for wide/high barriers. Remarkably, the time delay persists even when the barrier becomes static, i.e., in the limit where the modulation frequency vanishes. This indicates that the time delay obtained through the introduction of an external periodic perturbation actually reflects an intrinsic property of the tunneling dynamics, rather than an effect of the external drive or of a particular system. We apply our results to the analysis of tunneling times in optical experiments and find good agreement with the experimental data.

15.
arXiv (CS.LG) 2026-06-19

Enhancing Graph Neural Networks Using Proximity Graphs for Dust Source Emission Forecasting

arXiv:2606.19825v1 Announce Type: new Abstract: Accurate prediction of dust source emissions is critical for mitigating the significant environmental and health hazards posed by dust storms. Traditional forecasting methods often struggle to capture the complex spatiotemporal dynamics of these phenomena. In this paper, we demonstrate that proximity graphs enable Graph Neural Networks (GNNs) to effectively model the intricate spatial and temporal relationships between data points. Specifically, we use proximity graphs–such as Delaunay triangulation, Gabriel graph, k-Nearest Neighbor graph, and Yao graph–as the input for GNNs (including GraphSAGE, Graph Convolutional Networks, and Graph Attention Networks) to perform message passing. Our approach highlights the effectiveness of integrating proximity graphs with GNNs for robust and accurate dust source forecasting. To emphasize the importance of proximity graph representations, we compare our method against GNNs using random graphs for message passing. The results show that GNNs with proximity graphs significantly outperform those with random graphs and are also far superior to Long Short-Term Memory (LSTM) model in dust source emission forecasting.

16.
arXiv (CS.LG) 2026-06-16

How Post-Training Shapes Biological Reasoning Models

arXiv:2606.16517v1 Announce Type: new Abstract: Scientific reasoning models for biology combine language models with foundation models trained on multimodal biological data, including DNA, RNA, and proteins. These models are built through post-training, yet how each stage shapes reasoning and generalization remains poorly understood. We study when post-training improves performance and when it induces over-specialization. Across genomics, transcriptomics, and proteins, we train and evaluate more than 100 biological reasoning models under controlled variation in backbone, continued pre-training (CPT), supervised fine-tuning (SFT), and reinforcement learning (RL), measuring both in-domain (ID) and out-of-domain (OOD) performance. We find that each post-training stage reshapes generalization in a distinct way rather than contributing uniform gains. CPT improves downstream performance by aligning models with biological language. SFT consistently increases ID performance but causes OOD performance to peak early and decline as models fit the training distribution. RL, when applied to strong SFT checkpoints with aligned rewards, improves OOD performance and partially recovers generalization. These results show that biological reasoning does not improve monotonically with additional supervision or compute. Instead, performance depends on how training stages are composed. Under fixed post-training budgets, the strongest ID-OOD trade-off comes from brief SFT, larger RL allocations, and asymmetric adaptation capacity across stages.

17.
arXiv (CS.AI) 2026-06-11

LLMs+Graphs: Toward Graph-Native, Synergistic AI Systems

arXiv:2606.11560v1 Announce Type: cross Abstract: Large Language Models (LLMs) have advanced rapidly, but their limitations in structured and multi-hop reasoning underscore the need for graph-native, synergistic artificial intelligence (AI) systems. Graph-structured data underpins critical applications across social, biological, financial, transportation, web, and knowledge domains, making it essential to understand how LLMs can leverage graph computation for grounded, context-rich inference. Three complementary synergies are emerging: LLMs augmented with graph computation for retrieval and reasoning; bidirectional integration between LLMs and knowledge graphs (KGs), where LLMs support KG construction and curation while KGs enforce semantic constraints and factual consistency; and AI agents strengthened by graph algorithms for planning, decision making, and multi-step reasoning. In parallel, LLMs introduce new capabilities for graph data management and graph machine learning (ML) through natural language interfaces and hybrid LLM-graph neural network (GNN) pipelines. This tutorial synthesizes the algorithms, systems, and design principles driving these converging directions, offering data science and data mining researchers a unified perspective on integrating LLMs, graph data management, graph mining, graph ML, and agentic computation into next-generation graph-native AI systems.

18.
arXiv (CS.CV) 2026-06-12

EquiDexFlow: Contact-Grounded SE(3)-Equivariant Dexterous Grasp Generative Flows

Most learned dexterous grasp generators relegate contact forces to a downstream verification step, so a kinematically-plausible pose can still violate the conditions for a stable physical grasp. We address this with EquiDexFlow, an SE(3)-equivariant flow-matching model that jointly predicts wrist pose, joint angles, fingertip contacts, surface normals, and contact forces from an object point cloud. Our architecture projects contacts onto the object surface and forces into the Coulomb friction cone by construction, so placement and friction compliance hold without loss penalties. We prove end-to-end SE(3) equivariance and verify it empirically over 200 rotations, with wrist residuals below $0.04^\circ$ and exactly zero joint deviation. Trained on 8,100 force-closure grasps across 81 objects for the 16-DoF Allegro Hand, our model achieves zero friction violations, the best composite score, and the lowest wrench residual among all ablation variants. We retarget decoded fingertip contacts to a 16-DoF LEAP Hand via per-finger inverse kinematics, and our hardware-feasible refinement places every joint at least 5% inside its actuator envelope while preserving wrench balance. On the physical robot, retargeted EquiDexFlow-decoded grasps complete open-loop pick-and-hold trials on all six test objects, with every asymmetric object succeeding at both the canonical pose and a $120^\circ$ co-rotation. Videos, code, and checkpoints are available at https://equidexflow.github.io.

19.
PLOS Computational Biology 2026-06-01

Supervised deep learning with gene functional annotation for cell classification

作者:

by Zhexiao Lin, Yuanyuan Gao, Wei Sun Gene-by-gene differential expression analysis is a widely used supervised approach for interpreting single-cell RNA-sequencing (scRNA-seq) data. However, modern scRNA-seq datasets often contain large numbers of cells, leading to the identification of many differentially expressed genes with extremely small p-values but negligible effect sizes, thus making biological interpretation difficult. To overcome this challenge, we developed Supervised Deep learning with gene functional ANnotation (SDAN), a method that integrates gene functional annotation information (e.g., protein-protein interaction) with gene-expression profiles through a graph neural network. SDAN identifies functionally coherent gene sets that optimally classify cells, and the resulting cell-level classification scores can be aggregated to make individual-level predictions. We evaluated SDAN alongside three representative existing methods in three real-data applications aimed at identifying gene sets associated with severe COVID-19, dementia, and cancer immunotherapy response. Across all applications, SDAN consistently outperformed the alternative approaches by achieving two objectives simultaneously: accurate outcome classification and clear assignment of genes to functionally related gene sets.

20.
arXiv (quant-ph) 2026-06-19

Optimal multi-spectral squeezing via deterministic 2D-phase optimization

arXiv:2606.20192v1 Announce Type: new Abstract: Optimization routines are ubiquitous in quantum information technologies and essential to reach the resource levels required by quantum protocols. Specifically, multi-spectral squeezing for use in such protocols requires that losses be kept minimal at every stage, including coherent detection, which is performed by interfering the signal with a classical local-oscillator beam. This in turn requires control over all optical degrees of freedom of the beam in order to optimize the detection. The most general framework for this optimization relies on agnostic, off-the-shelf machine-learning techniques. Here we take the opposite approach: by focusing on a physical description of the specific optical process, we develop a deterministic sequential algorithm that provably reaches the global maximum of the visibility in a pixel basis and scales linearly with the number of pixels, thereby offering an efficient and theoretically grounded alternative to black-box optimization. In our waveguide-based setup, the optimized mask increases the visibility from 76% to 84%, corresponding to a 20% gain in mode-matching efficiency. Multi-spectral squeezing measurements confirm that this improvement translates directly into quantum readout: for the most squeezed spectral mode, the squeezing increases from $-2.08$ dB to $-2.64$ dB, consistent with the inferred efficiency gain. These results establish deterministic spatial phase shaping as an effective, interpretable route to enhanced multimode squeezing in waveguide platforms.

22.
arXiv (CS.LG) 2026-06-17

Uncertainty Quantification of Engineering Structures by Polynomial Chaos Expansion and Multivariate Active Learning

arXiv:2606.17233v1 Announce Type: new Abstract: In many engineering applications, a single high-fidelity model produces multiple quantities of interest (QoIs) under the same input parameters, e.g. finite element models of complex physical systems. To alleviate the high computational cost of direct model evaluations, surrogate models are widely used to construct efficient approximations of model responses. Naturally, the accuracy of surrogates strongly depends on the quality of the experimental design (ED). However, a single ED may not provide an adequate representation for all outputs simultaneously, especially when different outputs exhibit varying sensitivities to the input variables. A straightforward solution is to perform separate sampling for each output, but this results in increased sampling complexity and computational cost. From a statistical perspective, such an approach also ignores potential correlations among all outputs and may compromise data consistency. To address this issue, an adaptive sequential sampling method for constructing polynomial chaos expansion surrogate models is generalized for vector valued QoIs. The method sequentially selects new samples from a candidate pool based on their local contribution to the output variance, while balancing distance-based exploration of the input space and exploitation of aggregated variance information across all outputs. Its performance is compared with non-sequential Latin Hypercube Sampling through several numerical examples from engineering problems. Numerical results demonstrate that the proposed strategy improves both surrogate accuracy and stability, and provides a more reliable estimation of second-order statistics.

23.
arXiv (CS.AI) 2026-06-15

Beyond LoRA: Is Sparsity-Induced Adaptation Better?

arXiv:2606.13767v1 Announce Type: cross Abstract: Low-rank adaptation (LoRA) and its variants provide a memory- and compute-efficient alternative to full fine-tuning of pre-trained models. However, questions remain about the comparative generalizability of these approaches and how the structural restrictions on low-rank updates preserve effective adaptation performance. We present a historical framing, covering the past (full fine-tuning and original LoRA), the present (different variants of LoRA), and propose simpler, cheaper, parameter-efficient extensions by inducing sparsity within existing LoRA variants: Cheap LoRA (cLA), training a single low-rank factor with the other fixed (deterministically or, in its randomized variant, stochastically), and the chained circulant variant, ${c}^3$LA. We frame cLA as a structured instance of asymmetric LoRA, serving as a controlled column-subspace restriction of full fine-tuning. We derive information-theoretic generalization error bounds for these variants, marking one of the first endeavors in this area. Empirically, we evaluate 11 fine-tuning methods across 10 pre-trained models and 14 datasets, analyzing the fine-tuned models' performance and generalization using tools such as loss landscapes and spectral analysis. Despite the sensitivity of fine-tuned models to the pre-trained model, datasets, and other factors, our study suggests that restricting LoRA-based PEFT methods' adaptation to a sparse, structured column space remains competitive across tasks with their parameter-matched baselines while reducing up to 10% training time and peak GPU memory up to 15%, even with a naïve, non-optimized, sparse implementation. Our theoretical and empirical generalization measures provide a more consistent and principled approach to their cost-effective adaptation than commonly used analytical tools. Overview and code are available at: https://elicaden.github.io/Beyond_LoRA/.

24.
arXiv (CS.CL) 2026-06-16

SING: Synthetic Intention Graph for Scalable Active Tool Discovery in LLM Agents

Large language model (LLM) agents increasingly rely on agent harnesses that manage context, tools, and multi-turn execution, making tools a central interface for acting in realistic digital environments. As harness-connected tool ecosystems expand to hundreds or thousands of APIs, services, and task-specific skills, exhaustive tool schema injection becomes costly and imposes a closed-world assumption that limits agents to a predefined static inventory. Retrieval-augmented tool selection offers a natural alternative, but existing one-shot retrieval methods often fail to align isolated tool descriptions with the agent's true task intention, especially in long-horizon tasks where required capabilities emerge through decomposition, observations, and newly induced subgoals. We propose SING, an intention-aware active tool discovery framework that builds an intention-tool graph linking user intentions, tool capabilities, and tool collaboration patterns, and dynamically retrieves tools according to evolving task states. Using a unified corpus of 7,471 tools, we evaluate SING on three real-world tool-use benchmarks. SING improves Global Recall@5 by up to 59.8% and downstream success rate by up to 28.9% over baselines, while reducing full-corpus tool-schema exposure by 99.8%, demonstrating that intention-aware graph structure enables more accurate and context-efficient tool discovery in large-scale agentic ecosystems.

25.
arXiv (CS.LG) 2026-06-16

Scalable Graph Condensation with Evolving Capabilities

arXiv:2502.17614v3 Announce Type: replace Abstract: The rapid growth of graph data creates significant scalability challenges as most graph algorithms scale quadratically with size. To mitigate these issues, Graph Condensation (GC) methods have been proposed to learn a small graph from a larger one, accelerating downstream tasks. However, existing approaches critically assume a static training set, which conflicts with the inherently dynamic and evolving nature of real-world graph data. This work introduces a novel framework for continual graph condensation, enabling efficient updates to the distilled graph that handle data streams without requiring costly retraining. This limitation leads to inefficiencies when condensing growing training sets. In this paper, we introduce GECC (\underline{G}raph \underline{E}volving \underline{C}lustering \underline{C}ondensation), a scalable graph condensation method designed to handle large-scale and evolving graph data. GECC employs a traceable and efficient approach by performing class-wise clustering on aggregated features. Furthermore, it can inherit previous condensation results as clustering centroids when the condensed graph expands, thereby attaining an evolving capability. This methodology is supported by robust theoretical foundations and demonstrates superior empirical performance. Comprehensive experiments including real world scenario show that GECC achieves better performance than most state-of-the-art graph condensation methods while delivering an around 1000$\times$ speedup on large datasets.