Academic Intelligence · Curated Daily

Explore the Frontier of Global Academia

AcademicHub aggregates real-time literature from top journals and preprint platforms. Build your personal research radar and let large language models compile cross-disciplinary analysis briefings automatically.

01.
arXiv (CS.AI) 2026-06-12

Arbor: Tree Search as a Cognition Layer for Autonomous Agents

arXiv:2606.12563v1 Announce Type: new Abstract: Arbor is a multi-agent framework that introduces structured tree search as a cognition layer for autonomous agents operating in large, stateful action spaces. Prior autonomous optimization systems operate on isolated targets with stateless evaluation. Arbor instead maintains an explicit search tree of scored hypotheses that serves as the shared working memory across agents, evolving with every measurement, treating failures as diagnostic signal that reshapes subsequent exploration, and expanding as prior successes shift the bottleneck distribution. We validate Arbor on full-stack LLM inference optimization, a domain where achieving peak performance has historically required coordinated effort from engineering teams across the application, framework, compiler, kernel, and hardware stack. Arbor pairs an Orchestrator agent, which drives optimization by delegating to Domain Specialists across the inference stack, with a Critic agent that safeguards stability through root-cause analysis, introspection, and measurement validation – a checks-and-balances architecture where neither agent can unilaterally drive the system. Agent capabilities are decomposed into hard skills (domain expertise) and soft skills (coordination protocols that determine how contributions compose), enabling fully autonomous multi-day campaigns. Arbor achieves up to 193% inference throughput-latency Pareto improvement over vendor-optimized baselines, while a single agent without the harness plateaus at +33% throughput improvement and crashes irrecoverably within hours. Arbor generalizes to multiple generations of hardware platform, and run-to-run variance is within 2 percentage points demonstrating that the method is hardware-agnostic and reproducible.

02.
arXiv (CS.CV) 2026-06-18

Moebius: 0.2B Lightweight Image Inpainting Framework with 10B-Level Performance

While 10B-level industrial foundation models have pushed the boundaries of image inpainting, their prohibitive computational costs severely hinder practical deployment. Constructing a highly optimized task-specific specialist offers a promising solution; however, extreme structural compression inevitably triggers a severe representation bottleneck. To conquer this, we propose Moebius, a highly efficient lightweight inpainting framework. We systematically reconstruct the diffusion backbone by introducing the Local-$\lambda$ Mix Interaction ($L\lambda MI$) block. Comprising Local-$\lambda$ and Interactive-$\lambda$ modules, it elegantly summarizes spatial contexts and global semantic priors into fixed-size linear matrices, preserving complex latent interactions while drastically shedding parameters. Furthermore, to unlock the full representational capacity of this highly compact architecture, we synergistically pair it with an adaptive multi-granularity distillation strategy. Operating strictly within the latent space to avoid expensive pixel-space decoding, this strategy dynamically balances multiple gradient-based losses to achieve high-fidelity alignment. Extensive experiments across natural and portrait benchmarks demonstrate that this optimal synergy enables Moebius to rival or even surpass the generation quality of the 10B-level industrial generalist FLUX.1-Fill-Dev. Remarkably, Moebius achieves this using less than 2\% of the parameters (0.22B vs. 11.9B) while delivering a $>15\times$ acceleration in total inference time, setting a new efficiency standard for high-fidelity inpainting. Project page at https://hustvl.github.io/Moebius.

03.
arXiv (CS.CV) 2026-06-16

Structure-aware Knowledge-guided Heterogeneous Mamba for Zygomaticomaxillary Suture Assessment

The Zygomaticomaxillary Suture is a key circummaxillary structure that connects the zygomatic bone and the maxilla, which serves as a primary site of resistance during maxillary advancement, and its maturation status directly influences the timing and efficacy of orthopedic interventions. However, accurate staging of ZMS maturation remains challenging due to subtle high-frequency transitions in suture lines and the global semantic ambiguity between adjacent stages. To address this, we present the first public ZMS dataset, comprising 3,790 ZMS images covering the entire age range from 4 to 24 years. Based on this dataset, we propose SKMamba, a Structure-aware and Knowledge-guided Mamba-based multi-modal framework for automated ZMS maturation assessment. SKMamba adopts a decoupled dual-path architecture that mimics the hierarchical diagnostic process used by experienced orthodontists. We first introduce an Implicit Edge Extractor (IEE), which leverages structural pre-training to reduce trabecular noise and accentuate sutural boundaries. Complementarily, a Cross-Modal Semantic Alignment (CSA) module is designed to incorporate anatomical descriptions from a large language model (LLM). This module helps align local morphological cues with global semantic descriptions while ensuring that objective morphological evidence remains the primary basis for decisions. Extensive experiments on our ZMS dataset demonstrate that SKMamba achieves state-of-the-art performance compared to existing methods. Code is available at https://github.com/galaxygxq1116/SKMamba.

04.
arXiv (CS.CL) 2026-06-12

PiDA: Phonetically-Informed Data Augmentation for Robust Vietnamese Speech Translation

Cascaded speech translation (ST) systems suffer from error propagation when Automatic Speech Recognition (ASR) outputs incorrect transcripts. We present the first systematic categorization of ASR errors for Vietnamese ST, classifying substitution errors by phonetic cause and quantifying their impact on downstream Neural Machine Translation (NMT) performance using Linear Mixed-Effects Modelling. We confirm that most ASR substitution errors arise from phonetic confusions rather than random noise, and that these phonetic errors significantly degrade ST quality. Motivated by this finding, we propose Phonetically-Informed Data Augmentation (PiDA), which generates ASR-like corruptions by substituting words with phonetically similar alternatives using phonetic word embeddings. Fine-tuning on a PiDA-augmented version of FLEURS Vietnamese-English improves translation of erroneous ASR outputs (up to +2.04 BLEU over standard fine-tuning) while also slightly improving clean-text performance.

05.
arXiv (CS.CL) 2026-06-16

CODA-BENCH: Can Code Agents Handle Data-Intensive Tasks?

Advanced agents are increasingly demonstrating the potential to operate as autonomous engineers, creating a growing demand for evaluation benchmarks that capture the complexity of real-world development. Such environments typically involve both complex code and large-scale data (i.e., file system). However, existing benchmarks usually evaluate code-centric or data-centric capabilities in isolation, leaving a clear gap with real development scenarios. In this paper, we bridge this gap by introducing CODA-BENCH, the first benchmark to jointly evaluate code and data intelligence in a data-intensive environment. We construct a data-intensive Linux sandbox based on the Kaggle ecosystem (containing hundreds of datasets), where agents must actively explore complex file hierarchies to identify relevant resources and generate code for data-driven analytical tasks. CODA-BENCH comprises 1,009 tasks spanning 31 communities, with each task environment containing an average of 980 files, simulating realistic data scale and noise. Evaluations of advanced agents reveal that even top-performing systems struggle to effectively integrate data discovery with code execution, achieving a success rate of only 61.1%. These results highlight a substantial gap in current agentic capabilities for data-intensive tasks and point to promising directions for future research.

06.
medRxiv (Medicine) 2026-06-15

Comparative Analysis of Machine Learning Models vs. Traditional Clinical Calculators for Cardiovascular Risk Prediction

Background: Cardiovascular diseases (CVD) remain the leading global cause of mortality, responsible for approximately 31% of all deaths worldwide in 2021. Traditional risk calculators, including Framingham, ASCVD, SCORE, and SCORE2, have long constituted the cornerstone of primary prevention strategies; however, they were derived predominantly from high-income European and North American populations, thereby limiting their predictive accuracy in diverse epidemiological contexts, particularly among Hispanic/Latino communities. Machine learning (ML) offers an alternative to capture the non-linear interactions inherent in biomedical data. Objective: The present study develops and validates ML-based models for cardiovascular mortality prediction using the National Health and Nutrition Examination Survey (NHANES) 1999-2018 dataset, and systematically compares their discriminative performance against eleven conventional clinical CVD risk calculators. Materials and Methods: A dedicated software platform, "CardioPrediQ," was designed to integrate multiple CVD calculators with ML-based risk assessment. A cohort of 12,847 participants with 16 predictor variables was derived from NHANES. Six algorithms (Logistic Regression, Cox Proportional Hazards, Gradient Boosting, AdaBoost, Random Forest, and Extra Trees) were trained in combination with six class-balancing strategies, yielding 36 model configurations. All models were trained on a stratified 70/30 split and calibrated using the Saerens prior probability adjustment method. Performance was evaluated using AUC-ROC, sensitivity, specificity, F1-score, and a weighted composite score. DeLong's test was employed to assess the statistical significance of AUC differences between the best-performing ML model and each conventional calculator. Results: Gradient Boosting with 2:1 oversampling and Saerens calibration achieved the best overall performance (AUC = 0.8934; composite score = 0.7904), outperforming all traditional calculators in composite ranking. The top six positions were occupied exclusively by ML and statistical models. The mean age of cardiovascular decedents was 67.43 years compared with 47.74 years among survivors. DeLong's test confirmed statistical superiority over six traditional CVD calculators (p < 0.05), whereas the difference against the top-performing calculators (ASCVD, HEARTS Caribbean, ASCVD Colombia, SCORE2, HEARTS North America) did not reach statistical significance. Age dominated feature importance at 41.2% relative weight, followed by systolic blood pressure (18.7%). Saerens calibration reduced the Brier score from 0.1286 to 0.1158, substantially improving probability calibration. Conclusions: ML models demonstrated superior composite performance over traditional calculators. The statistical equivalence with the highest-performing conventional calculators in the NHANES cohort is context-dependent and validates the methodological pipeline. The CardioPrediQ platform addresses the critical need for integrated, scalable CVD risk assessment tools, which is particularly relevant for Latin American populations where calculator validation remains limited. These findings support the integration of calibrated ML-based risk prediction into clinical practice while underscoring the importance of probability calibration for informed clinical decision-making.

07.
medRxiv (Medicine) 2026-06-15

Using wastewater surveillance to explore community-level dietary intake in sewered and non-sewered sanitation systems in Malawi, Africa

Wastewater can be used to measure biomarkers that reflect population-level dietary intake and diversity; however, how this approach may apply in a low-income country remains a knowledge gap. This study aims to evaluate whether select dietary-related metabolites can be detected in wastewater and environmental surveillance (WES) samples from both sewered and non-sewered sanitation systems in Malawi, Africa. Fourteen WES samples were collected and analyzed from two university campuses in Mzuzu and Thyolo, Malawi. Four targets were analyzed: N-methyl-2-pyridone-5-carboxamide (2PY; a biomarker of vitamin B3), 4-pyridoxic acid (4-PA; a biomarker of vitamin B6), as well as enterodiol and enterolactone (biomarkers of dietary fiber and polyphenol consumption). An 18-question survey, paired spatiotemporally with the WES measurements, assessed self-reported daily dietary intake, food insecurity, and nutrient deficiency symptoms among 500 respondents. Among the 14 WES samples, 2PY, 4-PA, and enterolactone were detected, while enterodiol was not detected above the method limit (

08.
arXiv (CS.LG) 2026-06-19

How to sketch a learning algorithm

Authors:

arXiv:2604.07328v3 Announce Type: replace Abstract: How does the choice of training data influence an AI model? This broad question is of central importance to interpretability, privacy, and basic science. At its technical core is the data deletion problem: after a reasonable amount of precomputation, quickly predict how the model would behave in a given situation if a given subset of training data had been excluded from the learning algorithm. We present a data deletion scheme capable of predicting model outputs with vanishing error $\varepsilon$ and failure probability $\delta$ in the deep learning setting. Our precomputation and prediction algorithms are only $\tilde{O}(\log(1/\delta)/\varepsilon^2)$ factors slower than regular training and inference, respectively. The storage requirements are those of $\tilde{O}(\log(1/\delta)/\varepsilon^2)$ models. Our proof is based on an assumption that we call stability. In contrast to the assumptions made by prior work, stability appears to be fully compatible with learning powerful AI models. In support of this, we show that stability is satisfied in a minimal set of experiments with microgpt. Our code is available at https://github.com/SamSpo1/microgpt-sketch. At a technical level, our work is based on a new method for locally sketching an arithmetic circuit by computing higher-order derivatives in random complex directions. Forward-mode automatic differentiation allows cheap computation of these derivatives.

09.
arXiv (CS.CL) 2026-06-16

Retrievable Gradients: Continual Post-Training Without Cumulative Weight Drift

Continual post-training enables models to absorb emerging knowledge after deployment, but repeatedly updating shared parameters can accumulate weight drift, potentially causing catastrophic forgetting and degrading general capabilities. Retrieval-augmented generation avoids such parameter drift, yet often lacks the depth of parametric knowledge integration. In this paper, we propose ReGrad (Retrievable Gradients), a new paradigm that treats gradients as retrievable units of knowledge. ReGrad pre-computes document-specific gradients offline, stores them in an indexed Gradient Bank, and retrieves only query-relevant gradients at inference time for temporary weight adaptation. However, raw language-modeling gradients are optimized for token-level document reconstruction rather than for query-driven knowledge use. We therefore introduce a bi-level meta-learning objective that reshapes document-derived gradients into generalizable adaptation signals for downstream tasks. Experiments across general and domain-specific settings show that \textsc{ReGrad} outperforms CPT and RAG baselines, enabling scalable and reversible parametric knowledge injection without accumulating weight drift.

10.
arXiv (CS.CV) 2026-06-15

Aligned but Stereotypical? How System Prompts Shape Demographic Bias in LLM-Based Text-to-Image Models

Text-to-image (T2I) systems increasingly rely on Large Language Model (LLM)-based text conditioning to interpret and expand user prompts. While this improves prompt understanding and text-image alignment, we find that it can also introduce implicit demographic assumptions, even when demographic attributes are unspecified. To systematically investigate this behavior across varying levels of prompt ambiguity and complexity, we construct a comprehensive benchmark covering diverse prompt settings. Evaluations on eight recent T2I models show that LLM-based systems consistently exhibit stronger demographic skew than non-LLM-based baselines. We further analyze system prompts, a component unique to LLM-based T2I systems that guides prompt interpretation and expansion. Our analyses show that these instructions strongly influence text embeddings, which subsequently leads to biased image generations. Motivated by these findings, we propose FairPro, a training-free debiasing framework that adaptively generates fairness-aware instructions while preserving user intent. Experiments demonstrate that FairPro substantially reduces demographic disparities while maintaining prompt fidelity.

11.
arXiv (CS.LG) 2026-06-11

Provable Recovery of Locally Important Signed Features and Interactions from Random Forest

arXiv:2512.11081v2 Announce Type: replace-cross Abstract: Feature and Interaction Importance (FII) methods are essential in supervised learning for assessing the relevance of input variables and their interactions in complex prediction models. In many domains, such as personalized medicine, local interpretations for individual predictions are often required, rather than global scores summarizing overall feature importance. Random Forests (RFs) are widely used in these settings, and existing interpretability methods typically exploit tree structures and split statistics to provide model-specific insights. However, theoretical understanding of local FII methods for RF remains limited, making it unclear how to interpret high importance scores for individual predictions. We propose a novel, local, model-specific FII method that identifies frequent co-occurrences of features along decision paths, combining global patterns with those observed on paths specific to a given test point. We prove that our method consistently recovers the true local signal features and their interactions under a Locally Spike Sparse (LSS) model and also identifies whether large or small feature values drive a prediction. We illustrate the usefulness of our method and theoretical results through simulation studies and a real-world data example.

12.
Nature (Science) 2026-06-10

Light slows down carbon nanotubes in water

Water-suspended carbon nanotubes move more slowly in green light, suggesting that excited electrons in the tubes couple to the water through ‘quantum friction’. Water-suspended carbon nanotubes move more slowly in green light, suggesting that excited electrons in the tubes couple to the water through ‘quantum friction’.

13.
arXiv (quant-ph) 2026-06-12

To Cool, or Not to Cool? Displacement Sensing with Hot Quantum States

arXiv:2606.13650v1 Announce Type: new Abstract: Quantum-enhanced displacement sensing with bosonic systems is typically formulated assuming that the oscillator is cooled close to its ground state before nonclassical probe preparation. We investigate whether such near-ground-state initialization is necessary, or whether sensitive probes can instead be generated directly from thermal states. We analyze hot quantum probes produced by squeezing, number-raising, and Schrödinger-cat-state generation applied to thermal inputs. We identify two distinct mechanisms by which thermal mixedness can remain compatible with enhanced displacement sensitivity. First, projecting a mixed probe onto a definite parity sector removes the usual thermal suppression of the displacement quantum Fisher information, which can then increase with initial thermal occupation. Second, coherent superpositions of opposite displacements can retain sensitivity through coherence between their displaced components, even when the underlying state is mixed. We use these two mechanisms to classify hot-state protocols according to whether their sensitivity comes from parity selection, coherence between displaced components, or both. Finally, we formulate an experimentally relevant optimization problem comparing initial cooling with direct hot-state preparation under realistic decoherence and show that complete cooling is not universally optimal. Our results establish hot-state engineering as a route to quantum-enhanced bosonic displacement sensing without mandatory ground-state initialization.

14.
medRxiv (Medicine) 2026-06-17

Proteomics Uncovers Cryptic JPH2 Loss in Paediatric Dilated Cardiomyopathy

Despite recent advances in next-generation sequencing, genetic diagnostic rates for dilated cardiomyopathy (DCM) remain low. Among paediatric DCM, causes are often heritable, with a greater frequency of de novo, recessive and syndromic causes of disease. Novel diagnostic methods are therefore required to solve monogenic cases. To assess the value of proteomics as a diagnostic tool for paediatric DCM, we obtained left ventricle myocardial samples from paediatric patients undergoing heart transplantation at the Royal Children's Hospital, Melbourne. We performed genome sequencing and proteomics and leveraged this multi-omics dataset to uncover the molecular cause of disease in a gene elusive proband. The proband carried a heterozygous JPH2 frameshift variant identified on clinical exome sequencing. However, proteomic analysis showed a pronounced downregulation of JPH2, suggestive of biallelic loss-of-function. Closer inspection of the genomic data revealed a large inversion (~8.34 Mb) with a breakpoint falling within intron 5 of JPH2 that displaces the 3'UTR from the coding transcript. The two variants were confirmed to be in trans using long read DNA sequencing, consistent with a diagnosis of JPH2 autosomal recessive DCM. Finally, we applied RNA sequencing with total RNA library preparation to show that transcripts containing a 3'UTR were reduced to ~10% relative to controls. As a proof-of-principle, we present the first reported use of proteomics from explanted cardiac tissue to provide a genetic diagnosis. Our methodology has broad relevance to patients with genetically unsolved Mendelian diseases, who might undergo organ transplantation as part of clinical management.

15.
arXiv (CS.AI) 2026-06-17

OmniRetarget: Interaction-Preserving Data Generation for Humanoid Whole-Body Loco-Manipulation and Scene Interaction

arXiv:2509.26633v3 Announce Type: replace-cross Abstract: A dominant paradigm for teaching humanoid robots complex skills is to retarget human motions as kinematic references to train reinforcement learning (RL) policies. However, existing retargeting pipelines often struggle with the significant embodiment gap between humans and robots, producing physically implausible artifacts like foot-skating and penetration. More importantly, common retargeting methods neglect the rich human-object and human-environment interactions essential for expressive locomotion and loco-manipulation. To address this, we introduce OmniRetarget, an interaction-preserving data generation engine based on an interaction mesh that explicitly models and preserves the crucial spatial and contact relationships between an agent, the terrain, and manipulated objects. By minimizing the Laplacian deformation between the human and robot meshes while enforcing kinematic constraints, OmniRetarget generates kinematically feasible trajectories. Moreover, preserving task-relevant interactions enables efficient data augmentation, from a single demonstration to different robot embodiments, terrains, and object configurations. We comprehensively evaluate OmniRetarget by retargeting motions from OMOMO, LAFAN1, and our in-house MoCap datasets, generating over 8-hour trajectories that achieve better kinematic constraint satisfaction and contact preservation than widely used baselines. Such high-quality data enables proprioceptive RL policies to successfully execute long-horizon (up to 30 seconds) parkour and loco-manipulation skills on a Unitree G1 humanoid, trained with only 5 reward terms and simple domain randomization shared by all tasks, without any learning curriculum.

16.
arXiv (CS.AI) 2026-06-11

Harness In-Context Operator Learning with Chain of Operators

arXiv:2606.12318v1 Announce Type: cross Abstract: Neural operators approximate mappings between function spaces, but often generalize poorly to other operators and usually require fine-tuning or retraining. In-Context Operator Networks (ICON) addresses this issue by prompting the model with numerical context so that the model learns specific operators from prompts and adapt to different operators without fine-tuning. However, ICON may still fail to generalize to out-of-distribution (OOD) operator tasks. Inpired by the success of harness engineering of Large Language models (LLMs), we introduce Chain of Operators (CHOP), a framework that harness a frozen ICON to OOD operator tasks without updating its parameters. Specifically, CHOP constructs a chain of operators consisting of explicit elementary transformations and the frozen ICON. Experiments on a scalar conservation law and a mean-field control problem show that CHOP reduces relative inference error over direct ICON evaluation, while each operator in the chain remains interpretable and in closed form. A chain constructed on one PDE family further generalizes to a different family, indicating shared mechanisms across harness systems.

17.
arXiv (CS.AI) 2026-06-15

VHDLSuite: Unified Pipeline for LLM VHDL Generation with Data Synthesis and Evaluation

arXiv:2606.13735v1 Announce Type: cross Abstract: Large Language Models (LLM) have shown impressive capabilities in Register Transfer Level (RTL) code generation, particularly for Verilog. However, evaluating their performance with other Hardware Description Languages (HDL), especially VHDL, remains limited although its distinct language characteristics, such as stricter semantic rules, introduce evaluation considerations that differ from Verilog. This lack of coverage restricts fully understanding of how well current models generalize across hardware design languages with differing structures and semantics. To address this gap, we introduce VHDLSuite, a benchmark-centered infrastructure for scalable VHDL generation evaluation, integrating automated benchmark synthesis, executable validation, and multi-model diagnostic analysis. First, we propose a data pipeline that automatically converts Verilog designs and their accompanying testbenches into executable VHDL benchmark instances, followed by VUnit/GHDL-based validation to ensure each released task is compilable, runnable, and consistently checkable in the VHDL environment. Second, we introduce VHDLBench, a benchmark with over 200 VHDL problems with complete and validated testbenches across a wide range of complexity levels. Third, we extensively evaluate cutting-edge LLMs and uncover key challenges specific on LLM-aided VHDL generation. Our findings provide important insights and support future work in multi-language hardware design automation.Our data pipeline, benchmark, and evaluation framework will be open-sourced.

18.
arXiv (quant-ph) 2026-06-19

Approximating optimal decoding of quantum LDPC codes with narrow frontiers

arXiv:2606.20513v1 Announce Type: new Abstract: We introduce the Frontier decoder, a pruned dynamic-programming decoder for sparse quantum decoding problems. Frontier processes error variables in a chosen order, merges prefixes with the same residual syndrome and logical label, and approximates logical-coset posterior masses by retaining only a narrow scored frontier. Without pruning, the recursion is exact ordered inference with exponential complexity. In the code-capacity setting, the decoder reaches thresholds close to optimal for the surface code and the color code. In the circuit-level noise model, it achieves state-of-the-art performance with a very small average retained list size: less than 100 for the gross code $[[144,12,12]]$ at a physical error rate of $0.001$. When the list size is constant, the decoder has linear complexity, suggesting the possibility of low-latency implementations.

19.
arXiv (CS.AI) 2026-06-19

A Neuromorphic Reinforcement Learning Framework for Efficient Pathfinding in Robotic Mobile Fulfillment Systems

arXiv:2606.20031v1 Announce Type: cross Abstract: Dynamic environmental changes, confined workspaces, and stringent real-time constraints make pathfinding in Robotic Mobile Fulfillment Systems (RMFS) a challenging problem for conventional search- and rule-based methods, which typically suffer from high computational complexity and long decision latency. While reinforcement learning (RL) has emerged as a powerful alternative, deploying learned policies with extreme energy efficiency on resource-constrained hardware remains an open challenge. We present SDQN-RMFS, an end-to-end framework that achieves high-fidelity deployment of an RL-trained policy from a full-precision artificial neural network (ANN) through to a neuromorphic chip. By computing only when triggered by sparse events, this framework unlocks ultra-low-power RMFS pathfinding. Our full-stack pipeline operates as follows: an ANN policy is first efficiently trained via a collision-allowing strategy to densify informative trajectories, and then converted into a spiking neural network (SNN) via a hard-label knowledge distillation approach. This effectively addresses the output distribution mismatch, preserving policy capability across the ANN-to-SNN pipeline while substantially reducing inference latency. Hardware experiments demonstrate up to 11,281$\times$ energy savings and a nearly two-fold reduction in latency compared to a high-performance GPU baseline, while maintaining decision quality on par with the original trained policy. These results establish physical neuromorphic inference as a practical and energy-sustainable pathway for large-scale RMFS operations.

20.
medRxiv (Medicine) 2026-06-22

Image-based deep learning for emergency electrocardiogram classification

Automated electrocardiogram analysis has advanced largely through digital waveforms, yet many emergency-care workflows rely on ECGs available only as printed tracings, scanned reports, PDFs or mobile photographs. We developed an image-based deep learning system for emergency ECG classification and evaluated it in InCor-EMG, an expert-adjudicated dataset of 18,519 emergency ECGs spanning 12 ECG categories, with labels from 19 cardiologists. On the held-out test set, the final ConvNeXt ensemble achieved a macro F1-score of 0.807 (95% CI, 0.788-0.825), compared with 0.820 (95% CI, 0.805-0.832) for annotating cardiologists, and higher F1-scores than Mortara Veritas in most evaluated categories. Performance was associated more strongly with inter-reader agreement than with training sample size and remained informative across scanned and photographed ECGs, with supportive performance in model-enriched temporal and heterogeneous public-image evaluations. These findings support ECG image classification when digital waveforms are unavailable.

21.
arXiv (CS.CV) 2026-06-16

DLWM: Diverse Latent World Models for Efficient Multimodal Reasoning

Reasoning capabilities of multimodal large language models (MLLMs) have improved considerably in recent years. Existing approaches typically rely on explicit chain-of-thought or continuous latent-space trajectories to enhance multi-step reasoning. However, these methods generally assume that an input admits a single latent interpretation and unfold reasoning along a fixed path or under a uniform computation budget. In real-world multimodal settings, visual observations are often subject to occlusion, blur, viewpoint variation, or semantic ambiguity, giving rise to multiple plausible interpretations. A uniform reasoning strategy not only limits the model's ability to explore multiple hypotheses but also incurs high memory usage and rollout cost. We present DLWM (Diverse Latent World Models), a multimodal reasoning framework that combines latent-space reasoning with reinforcement learning. First, we construct a set of diverse latent world hypotheses in continuous latent space, each capturing a different plausible interpretation of the visual input, and unfold latent reasoning independently on each hypothesis. An orthogonality-based diversity regularizer explicitly prevents hypothesis collapse. Second, we formulate the latent reasoning process as a resource-constrained sequential decision problem and introduce a resource-aware reinforcement learning policy that adaptively allocates computation across hypotheses, dynamically deciding whether to expand, terminate, or merge reasoning paths, thereby substantially reducing memory footprint and improving rollout efficiency. Experiments on multiple multimodal reasoning benchmarks demonstrate that DLWM outperforms existing methods by 2-5 points in accuracy while reducing memory usage by 24%.

22.
arXiv (CS.AI) 2026-06-19

Learner-based Concept Drift Detection: Analysis and Evaluation

arXiv:2606.20216v1 Announce Type: cross Abstract: Machine learning algorithms deployed for evolving streaming environments must handle the non-stationary data distributions, commonly referred to as concept drift. The presence of concept drift poses a major challenge for many real-world applications because it can severely degrade their predictive performance, hindering their ability to support robust decision-making. Consequently, the timely and efficient detection of drift events is critical for sustaining high accuracy over time. This study examines theoretically the concept drift characteristics and numerous drift detection algorithms across several categories. Furthermore, we evaluate their performance on both synthetic and real-world datasets exhibiting diverse streaming scenarios and drift characteristics, such as abrupt and gradual changes. This study aims to enhance understanding of the complex notion of concept drift characteristics and behavior of drift detectors, along with their applicability to diverse contexts.

23.
arXiv (CS.CV) 2026-06-18

Clinically Aligned Geometry Constraints for Robust IVUS Vessel Boundary Segmentation

Intravascular ultrasound (IVUS) lumen and external elastic membrane (EEM) segmentation is important for quantitative coronary plaque burden assessment. Errors in lumen or EEM delineation directly propagate to plaque area, plaque burden and geometric measurements. However, standard methods prioritising overlap scores often suffer from boundary drift and topology errors, leading to inaccurate clinical measurements. We present GeoCat, a geometry-consistent network that processes 5-frame IVUS clips using dual Cartesian-polar encoders with cross-domain attention and temporal fusion. A differentiable geometry consistency loss directly supervises clinically relevant descriptors including diameters, orientations, and cross-sectional areas. The model is trained on 12,242 annotated frames from 146 patients acquired with two commercial IVUS systems. We evaluate performance using both segmentation accuracy and plaque-relevant clinical metrics, including Dice/IoU, boundary measures(95HD (mm), ASSD), topology violation rate, and clinical geometry errors (dmax/dmin, angles, and areas). On our dataset, GeoCat achieves a Dice of 0.93, reduces 95HD to 0.14 mm, and lowers topology violations to 1.0%. Importantly, it significantly improves geometric fidelity, yielding diameter errors of 0.13-0.16 mm and angular errors of ~8 degrees, supporting reliable plaque burden quantification.

24.
arXiv (CS.CV) 2026-06-12

A Machine Learning Framework for Real-Time Personalized Ergonomic Pose Analysis

This paper introduces a new methodology for real-time prediction of ergonomic and non-ergonomic human poses using volumetric video data in three dimensions. Although the methodology was designed for ergonomic assessments, it can be adapted to other applications requiring real-time analysis of human posture. One aspect that makes this system stand out is its ability to analyze 3D point clouds during the assessment, enabling computation from multiple angles. This overcomes a critical limitation of cameras which provide often a fixed viewpoint, thereby restricting the data available for a thorough postural evaluation, especially when occlusions occur. The system continuously and automatically performs pose inference using the chosen perspective on the real-time streaming data; however, only the poses manually selected and labeled by the user are used to train the personalized deep learning classifier. The methodology has been refined through a case study in which RGB-D cameras captured subjects performing load-lifting tasks, enabling real-time skeletal labeling. The model was trained on this data and, following the training phase, performs inference on new streaming data in real time. This research offers a scalable and pragmatic approach for real-time ergonomic evaluation by combining state-of-the-art 3D data technologies and traditional 2D pose estimation algorithms. It addresses the increasing need for safety and health monitoring in workplace environments, marking a notable contribution to the domain.

25.
arXiv (CS.CV) 2026-06-16

Reasoning in Computer Vision: Taxonomy, Models, Tasks, and Methodologies

Visual reasoning matters for many computer vision tasks that go beyond surface-level object detection and classification. Despite progress in relational, symbolic, temporal, causal, and commonsense reasoning, existing surveys typically cover only one part of the problem, such as visual question answering, scene-graph generation, neuro-symbolic AI, or multimodal chain-of-thought, and rarely analyze reasoning types, methodologies, and evaluation protocols together. This survey addresses that gap. Following a structured literature review, we group visual reasoning into five major types (relational, symbolic, temporal, causal, and commonsense) and examine how each is implemented across methods that range from graph-based models, memory networks, attention mechanisms, and neuro-symbolic systems to reasoning with vision-language models (VLMs) and multimodal large language models (MLLMs), including visual chain-of-thought, visual programming, and tool-augmented and test-time reasoning. We then review evaluation protocols for functional correctness, structural consistency, and causal validity, and we analyze their limits in generalizability, reproducibility, faithfulness, and explanatory power. We also identify open challenges: scaling to complex scenes, integrating symbolic and neural paradigms more deeply, the shortage of comprehensive benchmarks, language-prior shortcuts and hallucination in foundation models, and reasoning under weak supervision. Finally, we set out a research agenda for vision systems and argue that connecting perception and reasoning is necessary for transparent, trustworthy, and cross-domain models, especially in high-stakes settings such as autonomous driving and medical diagnostics.