Ten simple rules for writing a peer review
by Farzana Rahman, Dan DeBlasio
Academic Intelligence · Curated Daily
AcademicHub 汇聚顶级期刊与预印本平台的实时文献。定制您的专属科研雷达,利用大语言模型自动生成交叉领域文献分析简报。
by Farzana Rahman, Dan DeBlasio
arXiv:2602.00510v2 Announce Type: replace Abstract: Most LLM code-synthesis benchmarks rely on unit tests as the reward oracle, but PCB schematic design has none: correctness is defined by structured physical constraints over real IC packages and pin-level assignments, per-task golden references are unavailable, and SPICE simulation does not validate schematic-level correctness. We introduce PCBSchemaGen, a training-free inference-time framework that turns a frozen LLM into a verifiable, repairable PCB schematic generator. The framework induces a domain schema from IC datasheets to ground LLM decoding, pairs it with a deterministic 5-layer continuous-reward verifier with pin-level error localization, and refines candidates through a Thompson Sampling arm-acquiring bandit. We evaluate on 2 PCB benchmarks covering 227 real-IC tasks across 22 unified circuit domains, including a public-schematic-derived suite that serves as a fully held-out generalization test (verifier, KG library, and prompts frozen before any evaluation). Under our framework, an open-weight 31B model (Gemma-4-31B) passes 81.3% of PCBBench tasks on average, and the same framework transfers across both benchmarks with zero verifier code changes; a Circuitron-style inference-time prompting baseline on the same Gemma-4-31B backbone collapses on hard system-level designs. This suggests inference-time refinement under a deterministic structural verifier is a general recipe for reference-free LLM code synthesis in domains without unit-test oracles. Our benchmarks and deterministic verifier are publicly available at https://github.com/HZou9/PCBSchemaGen_v2.
Automated aerial wildlife surveys increasingly rely on deep learning, yet standard object detectors require bounding-box annotations, reported to be up to seven times slower and three times more expensive to produce than point-level labels. To address this bottleneck, we introduce the Overhead Wildlife Locator (OWL), a weakly supervised density-estimation framework with three variants: OWL-C, a fully convolutional model for high-throughput screening; OWL-T, a Swin-augmented hybrid for heterogeneous, cluttered scenes; and OWL-D, built on a frozen DINOv3 ViT-H+/16 encoder with a DPT-style fusion decoder. We benchmark all three against POLO, YOLOv11n, and YOLOv11l across five public aerial datasets, from sparse fixed-wing savanna surveys to dense UAV paddock imagery, and against the published HerdNet baseline on its native Delplanque split. OWL-D sets a new state of the art on Delplanque (0.934 AP vs. HerdNet's 0.840) and records the highest AP on four of the five datasets. Performance is regime-dependent: on the extreme-density SheepCounter UAV dataset the hybrid OWL-T leads (0.978 AP) and the convolutional variants attain the lowest counting error, whereas the foundation-based OWL-D degrades, indicating which variant suits which survey type. We further validate operational readiness on the Alaska Department of Fish and Game's 2022 Central Arctic Caribou census: under cross-herd and cross-temporal transfer, OWL-C fine-tuned on the 2017 Porcupine Caribou Herd split attains F1 = 0.965 on a held-out patch test set, with a signed count error of +3.1% aggregated across the released test patches. We release the OWL code, model weights, and the annotated Porcupine Caribou Herd 2017 (PCH) and Central Arctic Herd 2022 (CAH) patches, the first open patch-level datasets for large-scale caribou aerial surveys, at https://github.com/microsoft/MegaDetector-Overhead.
arXiv:2606.16110v1 Announce Type: new Abstract: Machine unlearning has been extensively studied in response to growing privacy concerns and regulatory requirements. However, auditing whether unlearning algorithms have truly erased the influence of specific data remains an open challenge. The lack of reliable and practical auditing mechanisms can lead to critical privacy risks, such as residual information leakage. This paper initiates a systematic investigation into whether existing unlearning algorithms can truly forget the designated data. We propose the first practical and general-purpose auditing framework for machine unlearning, inspired by the concept of proof of ignorance. Our framework addresses the key practicality limitations of existing methods by eliminating the need for retraining-from-scratch baselines, avoiding the training of large numbers of shadow models, and requiring no intrusive intervention in the original training process. To evaluate the effectiveness of our framework, we first conduct validation experiments to verify its soundness and completeness. We then perform comprehensive experiments across six datasets and ten representative unlearning methods. The results demonstrate that our framework reliably distinguishes between successful and failed unlearning. In particular, we observe that retraining-based and fine-tuning-based methods can achieve effective unlearning, even when the target data remain in the original dataset. In contrast, de-optimization-based methods fail to achieve true unlearning and instead degrade the model's performance. Fisher/Hessian-based methods also fail to unlearn requested data, even formal certification is provided. Moreover, we show that our framework is robust against fake unlearning attempts and generalizes well to large language models.
arXiv:2606.16331v1 Announce Type: new Abstract: The integration of generative artificial intelligence with wireless communication and signal processing systems has opened new avenues for intelligent, data-driven decision-making in future 6G networks. This work proposes a diffusion soft actor-critic (Diffusion-SAC) approach that leverages offline reinforcement learning (RL) enhanced by denoising diffusion probabilistic models (DDPMs) to optimize trajectory and scheduling control in unmanned aerial vehicle (UAV) networks. While offline RL methods, such as conservative Q-learning (CQL), can learn from static datasets, they often struggle to generalize in low-data or dynamic conditions. To address this, we combine the robustness of CQL with the generative power of diffusion models, enabling expressive and signal-aware policy learning that generalizes beyond behavior policies. Applied to a UAV-assisted wireless network, the proposed framework minimizes transmission energy and improves fairness among devices. Simulations show that Diffusion-SAC outperforms standard offline RL baselines, achieving more stable convergence and higher rewards even with limited datasets. The method enhances data efficiency, reduces energy consumption, and increases throughput by more than 35 % compared to existing algorithms, demonstrating its potential for robust policy learning in next-generation wireless control systems.
arXiv:2508.10076v2 Announce Type: replace-cross Abstract: TensorKit$.$jl is a Julia-based software package for tensor computations, especially focusing on tensors with internal symmetries. This paper introduces the design philosophy, core functionalities, and distinctive features, including how to handle abelian, non-abelian, and anyonic symmetries through the ``TensorMap'' type. We highlight the software's flexibility, performance, and its capability to extend to new tensor types and symmetries, illustrating its practical applications through select case studies.
arXiv:2605.17232v2 Announce Type: replace Abstract: Discrete diffusion has become a leading framework for generative modeling in various applications including language, vision, and biology. Existing convergence theory, however, exhibits fundamental limitations. KL-based analyses diverge under singular priors such as the masked distribution, while bounds in total variation (TV) depend on the state space size $S$ and become vacuous for modern language tasks, where vocabularies contain hundreds of thousands of tokens. We develop a unified adjoint-equation-based framework that establishes dimension-free convergence guarantees in any integral probability metric (IPM). To the best of our knowledge, our bounds are the first to be entirely free of $S$ and applicable to both masked and uniform priors. Importantly, our theory relies only on a single standard rate-matrix regularity assumption and applies to general priors. Five novel techniques drive our improvements: working in the space of observables via adjoint equations rather than directly with probability measures, a regularity analysis that yields bounds on any IPM, a coupling argument that removes $S$-dependence under uniform transitions, and score-marginal cancellation and exit-routing techniques that remove $S$-dependence under masked transitions. Our framework thus sharply departs from prior analyses and avoids the shortcomings of pathspace-KL and existing TV-based approaches. Beyond convergence bounds, our framework provides a versatile toolkit for further theoretical study of discrete diffusion models, including principled choices of loss functions and dimension-free step complexity.
arXiv:2606.11998v1 Announce Type: new Abstract: Trusted monitoring is a cornerstone of AI control. However, as frontier models grow more capable, the increasing capabilities gap between trusted and untrusted models may render trusted models unreliable monitors. We introduce bootstrapped monitoring, a protocol that addresses this by inserting a stronger, intermediate untrusted model with transparent chain-of-thought reasoning into the oversight chain. The untrusted monitor ($U_m$) evaluates the agent's actions, while a weaker trusted model ($T$) oversees $U_m$'s reasoning to detect collusion. We evaluate bootstrapped monitoring on multi-turn software engineering tasks (BashArena) across multiple agents and monitors. Bootstrapped monitoring substantially improves catch rates over trusted-only monitoring, even when the untrusted monitor actively colludes with the agent, provided we have access to its raw chain-of-thought. Our results suggest that bootstrapped monitoring can extend the useful lifetime of trusted models in control as AI capabilities advance.
arXiv:2606.13821v1 Announce Type: new Abstract: Estimating the probability that a treatment outperforms a control for an individual patient, called the Individual Probability of Treatment Benefit (IPTB), offers a clinically intuitive alternative to population-average metrics. However, existing methods for IPTB estimation are largely confined to binary treatment settings, despite the prevalence of dose-varying interventions in clinical practice. We propose a general framework for IPTB estimation with ordinal outcomes under discrete dose assignments, called Dose-AIPTB (Dose Attention-based IPTB). Our approach recasts the problem as binary classification over the unobserved sign of the individual treatment effect, constructing pseudo-labels from covariate-similar pairwise comparisons and aggregating them via attention mechanisms or Nadaraya-Watson kernel regression. This formulation naturally accommodates multiple discrete dose levels, extending beyond the binary treatment paradigm. Through numerical experiments on real-world and synthetic data under covariate shift, varying sample sizes, and heterogeneous outcomes, we demonstrate that attention-based aggregation consistently outperforms kernel alternatives. The framework provides a foundation for personalized dose selection grounded in individual-level benefit probabilities. Codes implementing the model are publicly available at https://github.com/NTAILab/AIPTBDose.
arXiv:2606.17960v1 Announce Type: cross Abstract: Random states play a foundational role in different branches of modern quantum science. In this work, we study a recently proposed random state ensemble induced from von Neumann entropy through the Bogoliubov-Kubo-Mori (BKM) metric. In particular, we derive an exact yet explicit formula of average entanglement entropy over BKM ensemble. In obtaining the formula, we only make use of properties of normalization constant of the ensemble in the absence of its correlation kernel, contrary to average entropy computation of other ensembles. This new framework paves the way for calculating higher-order cumulants of BKM ensemble beyond the average.
arXiv:2606.20160v1 Announce Type: new Abstract: High-quality single-photon sources, realized through saturable emitters, photon blockade, or heralded pair generation, are indispensable building blocks for photonic quantum platforms. Although these mechanisms suppress multiphoton emission through distinct principles typically captured by analytical models, their practical implementation is constrained by conflicting requirements for purity, brightness, and indistinguishability, which must be balanced within high-dimensional design landscapes. Here, we propose a computational framework for optimizing competing metrics of single-photon sources. Building on a Liouville-space adjoint formulation that efficiently evaluates multiple objectives in Markovian open quantum systems, we develop a Jacobian-based update, which ensures first-order monotonic reduction of multi-objective costs. By incorporating simulated annealing to escape gradient-vanishing plateaus, our framework achieves a design success rate of nearly 60 % for photon blockade with g2(0) smaller than 0.1 and theoretically bounded brightness across a broad parameter space, without any analytical guidance. This framework provides a general recipe for multi-objective design of open quantum systems.
Reinforcement learning for multimodal large language models (MLLMs) is often hindered by severe reward sparsity in complex reasoning tasks. This challenge is particularly pronounced in human-centered scenarios involving states, emotions, intentions, and behaviors, where heterogeneous multimodal signals and subjective human factors make high-quality chain-of-thought (CoT) annotations expensive and difficult to obtain. Although many multimodal datasets provide expert-annotated ground-truth labels, directly using these labels for supervised fine-tuning may encourage shortcut learning in multimodal perception and provides limited transparency for safety-critical human–AI interaction. To address these limitations, we propose OmniOPSD, a Rationale-Privileged On-Policy Self-Distillation framework that uses frontier-generated rationales as teacher-side privileged evidence rather than student imitation targets. OmniOPSD uses frontier-generated evidence-aware rationales only as training-time privileged evidence context for a local teacher. The student samples its own rollout from the original multimodal input, while the rationale-privileged teacher scores the same tokens and provides dense token-level supervision. Thus, the student learns on its own trajectory distribution without directly imitating frontier-model completions, and inference requires no labels, rationales, CoT annotations, or closed-source model access. Experiments on MER-UniBench show that OmniOPSD achieves state-of-the-art performance with an average score of $84.19$, and ablations further support the value of rationale-privileged teacher guidance.
LLM-based agents trained with reinforcement learning optimize step-wise action prediction but lack metacognitive awareness of task progress, inducing a gap that hinders long-horizon scaling. A pilot study reveals that online progress prompting hurts performance while retrospective demonstrations help, yet this capability cannot emerge from outcome-reward training alone. We present RePro, Retrospective Progress-Aware Training, a framework that trains agents to self-generate progress signals via a forward-then-reflect rollout paradigm: the agent executes actions online, then retrospectively reassesses its step-wise progress given the completed trajectory and known outcome. RePro initializes with a Retrospection Warmup that teaches reflection format from minimal external demonstrations, then further trains through RePro-PO with a composite reward that produces self-generated signals without continuous external supervision. Experiments on WebShop, ALFWorld, and Sokoban show that RePro enhances the Qwen family's performance, with up to $12\%$ absolute success rate gains.
We introduce an in-domain supervised pipeline designed to counter the out-of-distribution performance drop that hampers supervised biomedical NLP models, a problem observed when models trained on pathology reports are moved across cancer registries. Our contribution is a reproducible recipe for training a supervised classifier from routinely collected cancer registry data. It describes how to build the in-domain training set and a production-matched holdout, and to choose operating points that keep the false-negative rate (FNR) very low while keeping reviewer workload manageable. The pipeline standardizes data curation with facility-stratified sampling and separate handling of reports linked to registry cases, and includes a blinded manual audit to estimate positive-case prevalence and label noise. On a 418k-report holdout set, the Kentucky model achieved FNR 0.003 and false-positive rate (FPR) 0.097, improving over the Seattle-trained MOSSAIC OncoID baseline (FNR 0.010, FPR 0.183) and raising F1 from 0.860 to 0.922. In a blinded manual review of 600 reports, estimated positive prevalence declined from 0.500 to 0.398, indicating substantial label noise with errors concentrated in rare primary sites.
Autoregressive video diffusion models enable streaming generation but often degrade over long rollouts: static scene layouts drift, while mechanisms that improve spatial stability tend to suppress motion, causing natural flows such as water, fire, or smoke to stagnate. We study this stability-motion trade-off in fixed-camera long-horizon nature video generation, where the two failure modes can be more clearly separated than in moving-camera settings. We propose Steady-Forcing, a memory and training framework combining a persistent visual anchor (V-Sink), an exponential moving-average motion memory (EMA-Sink), block-relative temporal encoding, periodic cache purification, and distillation from a Wan2.1-14B teacher with motion-rewarded priors under task-focused configurations. Together, these components are designed to preserve background identity while sustaining visually plausible fluid dynamics over multi-minute autoregressive rollouts. Evaluations across seven baselines show that Steady-Forcing improves long horizon background consistency and imaging quality, while a blind user study indicates stronger perceived stability and motion continuity. The benchmark evaluation further suggest that generic VBench aggregate scores under-penalize fixed-camera artifacts as well as rewarding drift-induced optical flow as Dynamic Degree while not directly penalizing texture hardening or flow stagnation - motivating future task-specific benchmarks for static-camera nature-flow evaluation. Project page: https://minar09.github.io/steadyforcing/
Spaceborne inspection systems often deploy perception models prior to launch, after which updating model weights or expanding fixed label sets becomes operationally impractical. While supervised models can be integrated pre-flight, adding new semantic capabilities in orbit requires retraining and re-uploading parameters. We investigate whether prompt-driven vision–language models can enable post-launch semantic expansion, allowing new spacecraft components to be specified via natural-language prompts without modifying onboard weights. We evaluate zero-shot instance segmentation of spacecraft components under a strictly frozen, single-pass inference protocol on a test set of $129$ images of previously unseen satellites. Under fixed global thresholds and no post-processing, SAM3 achieves $0.385$ mAP@$0.5$ and $0.267$ mAP@$0.5{:}0.95$. Performance is strongly scale-dependent: large structural elements like spacecraft bodies ($0.639$ AP@$0.50$) and solar arrays ($0.598$ AP@$0.5$) localize reliably, while relatively small appendages like antennas ($0.221$ AP@$0.5$) and thrusters ($0.081$ AP@$0.5$) remain difficult. Prompt formulation influences performance, with structured prompts incorporating spatial and geometric descriptors yielding up to $82%$ improvement over short category-name prompts. The model operates within the memory and compute envelope of contemporary embedded GPUs, suggesting prompt-driven grounding can provide a practical mechanism for post-launch semantic extension of dominant spacecraft structures while highlighting limitations of zero-shot localization for fine-scale components under orbital domain shift.
arXiv:2606.16352v1 Announce Type: cross Abstract: Computation integrity of remote large language model (LLM) serving can be questionable. For conventional deep neural networks (DNNs), the existing TEE-shielded DNN partitioning (TSDP) approach uses Trusted Execution Environment (TEE) to compute non-linear components and verify the integrity of linear components offloaded to an untrusted GPU. However, directly applying TSDP to Transformer-based LLMs incurs significant TEE computation and TEE-GPU communication overhead. This paper presents Communication-efficient TEE-GPU Attention (\textsc{VeriAttn}) for accelerating verifiable LLM inference. \textsc{VeriAttn} offloads both linear and non-linear computations of attention to the GPU, while TEE performs verification. Moreover, for prefill, \textsc{VeriAttn} uses a two-level pipeline to overlap data movement, TEE pre-/post-processing, and GPU computation. For decoding, when the key-value cache exceeds available GPU memory, \textsc{VeriAttn} partitions attention across TEE and GPU to reduce repeated key-value transfers. Evaluation on an Intel TDX platform shows that \textsc{VeriAttn} achieves 2.60-3.38$\times$ and 3.86-5.42$\times$ acceleration over TSDP for 6k-token prompts and 10k-token outputs during prefill and decoding, respectively.
Dense 3D reconstruction has demonstrated immense potential for spatial understanding, yet its viability as a real-time, onboard representation for autonomous driving remains an open challenge. Existing large-scale visual geometry models typically require substantial computational resources and lack the long-range geometric fidelity, surround-view consistency, and real-time efficiency demanded by dynamic driving environments. To bridge this gap, we present LiAuto-GeoX, an efficient grounded driving transformer designed for deployable, ego-centric 3D scene understanding. Our approach begins by learning a high-capacity driving geometry model from large-scale surround-view data, utilizing sparse LiDAR priors to provide robust geometric grounding in distant, ambiguous, or structure-sparse regions. We then instantiate this capability into a highly compact 155M-parameter onboard model through a novel geometry-preserving distillation framework. This framework employs mask-guided depth-aware distillation to retain fine-grained metric structures by emphasizing geometrically informative regions, and relative-pose relational distillation to enforce cross-view spatial consistency through pose-induced geometric relations. Extensive evaluations reveal that LiAuto-GeoX runs at 220 FPS on KITTI while maintaining high-fidelity dense reconstruction, enabling real-time deployment. The learned geometry transfers seamlessly to downstream autonomy tasks, achieving 90.6 PDMS in trajectory prediction, 24.63 mIoU in occupancy prediction, and 47.67 IoU in future-frame prediction. These all demonstrate that efficient dense 3D reconstruction can transcend its traditional role as a perception target to serve as a scalable, foundational geometric representation for next-generation autonomous driving.
Terminology substitution errors in clinical notes, where one medical term is replaced by a linguistically valid but clinically different term, pose a persistent challenge for automated error detection in healthcare. We introduce BLUEmed, a multi-agent debate framework augmented with hybrid Retrieval-Augmented Generation (RAG) that combines evidence-grounded reasoning with multi-perspective verification for clinical error detection. BLUEmed decomposes each clinical note into focused sub-queries, retrieves source-partitioned evidence through dense, sparse, and online retrieval, and assigns two domain expert agents distinct knowledge bases to produce independent analyses; when the experts disagree, a structured counter-argumentation round and cross-source adjudication resolve the conflict, followed by a cascading safety layer that filters common false-positive patterns. We evaluate BLUEmed on a clinical terminology substitution detection benchmark under both zero-shot and few-shot prompting with multiple backbone models spanning proprietary and open-source families. Experimental results show that BLUEmed achieves the best accuracy (69.13%), ROC-AUC (74.45%), and PR-AUC (72.44%) under few-shot prompting, outperforming both single-agent RAG and debate-only baselines. Further analyses across six backbone models and two prompting strategies confirm that retrieval augmentation and structured debate are complementary, and that the framework benefits most from models with sufficient instruction-following and clinical language understanding.
Phenotypic drug discovery has yielded many first-in-class small-molecule drugs by discovering modulators of disease phenotypes in physiologically relevant cellular systems. However, high-content phenotypic assays lack the ultra-high-throughput scalability of target-based screens. Recent advances in virtual screening present an opportunity to address this bottleneck, but have been limited to simple phenotypes like viability, restricted to small repurposing libraries, or lack in-depth biological validation. Here, we present PhenoCompass, a multimodal co-embedding model that aligns compound structures and high-content phenotypic imaging to enable virtual phenotypic screening over billion-compound libraries. Following training on the Joint Undertaking in Morphology dataset with more than 100,000 Cell Painting compound profiles, retrospective validation with historical biochemical high-throughput screening data demonstrates that PhenoCompass ranks compounds according to their biochemical target engagement. Leveraging PhenoCompass, we performed a prospective screen of 3.8 billion Enamine REAL compounds for inhibitors of PI3K/mTOR pathway, a critical signaling cascade whose aberrant activation is a common tumor driver. This search identified 11 novel compounds with pathway-consistent Cell Painting readout and diverse scaffolds, a 54-fold enrichment over the training set. Orthogonal validation experiments using a FOXO3A reporter assay and direct kinase inhibition confirmed seven structurally novel inhibitors with distinct mechanisms of action. These results highlight the convergence of diverse molecular target profiles onto a shared morphological pathway signature and establish PhenoCompass as a robust framework for high-content phenotypic virtual screening.
arXiv:2605.10840v3 Announce Type: replace-cross Abstract: We present Clin-JEPA, a multi-phase co-training framework for joint-embedding predictive (JEPA) pretraining on EHR patient trajectories. JEPA architectures have enabled latent-space planning in robotics and high-quality representation learning in vision, but extending the paradigm to EHR data – to obtain a single backbone that simultaneously forecasts patient trajectories and serves diverse downstream risk-prediction tasks without per-task fine-tuning – remains an open challenge. Existing JEPA frameworks either discard the predictor after pretraining (I-JEPA, V-JEPA) or train it on a frozen pretrained encoder (V-JEPA 2-AC), leaving the encoder unaware of the rollout signal that the retained predictor must use at inference; co-training the encoder and predictor under a shared JEPA prediction objective would supply this grounding, but naïve co-training is unstable, with representation collapse and online/target drift causing autoregressive rollout to diverge. Clin-JEPA's five-phase pretraining curriculum – predictor warmup, joint refinement, EMA target alignment, hard sync, and predictor finalization – addresses each failure mode by phase, stably co-training a Qwen3-8B-based encoder and a 92M-parameter latent trajectory predictor. On MIMIC-IV ICU data, three independent evaluations support the framework: (1) latent $\ell_1$ rollout drift uniquely converges ($-$15.7%) over 48-hour horizons while baselines and ablations diverge (+3% to +4951%); (2) the encoder learns a clinically discriminative latent geometry (deteriorating-patient cohorts displace 4.83$\times$ further than stable patients in latent space, vs $\leq$2.62$\times$ for baseline encoders); (3) a single backbone outperforms strong tabular and sequence baselines on multi-task downstream evaluation. Clin-JEPA achieves mean AUROC 0.851 on ICareFM EEP and 0.883 on 8 binary risk tasks (+0.038 and +0.041 vs baseline average).
Vibration-based bearing fault diagnosis requires resolving three interrelated measurement challenges, including the trade-off between global statistical feature efficiency and local transient signal fidelity, insufficient traceability of measurement features to underlying fault physics, and ineffective multi-source measurement information fusion across diagnostic scales. This paper presents a progressive physics-guided multi-scale vibration signal processing framework that addresses all three challenges within a unified diagnostic pipeline. An 81-dimensional measurement descriptor, derived from bearing kinematic theory and characteristic defect frequencies, establishes a physically traceable feature space enabling real-time fault screening at approximately 20 ms per sample. A fault-adaptive signal segmentation mechanism then directs analytical attention toward fault-relevant waveform regions guided by physics-based priors, without manual feature engineering. Structured fault mechanism knowledge is further encoded implicitly in model parameters during training, enabling autonomous multi-scale measurement fusion without external knowledge dependencies at inference. Validated on four public benchmark datasets under diverse operating conditions, the framework achieves 98.49% diagnostic accuracy with a 12.6-fold reduction in computational cost relative to signal-level baselines. Interpretability analysis confirms that diagnostic feature activations align with established bearing fault mechanics, supporting measurement traceability in safety-critical industrial systems.
Laboratory discovery increasingly depends on computational workflows that connect experimental data to analysis, interpretation and follow-up hypotheses. Yet these workflows remain constrained by labor-intensive use of specialized software, visual inspection through graphical user interfaces, and integration of knowledge across multiple sources. Here, we present Orion, a computer-using AI agent for biomedical image analysis and interpretation that moves towards lab automation by automating this computational layer of laboratory work. Orion combines large language models with terminal execution, GUI control and adaptive multi-step reasoning in a shared computing environment. It can inspect visual data, operate standard scientific software, mine web resources and conduct end-to-end analysis and interpretation workflows without requiring bespoke software integrations. Across benchmarks, Orion achieved over 90% accuracy on biomedical database and literature retrieval tasks, learned to use the popular tools CellProfiler and QuPath for quantitative analysis of cellular and tissue images, respectively, and facilitated autonomous discovery in experimental imaging data. In 100 hours of autonomous exploration of a large-scale perturbation imaging dataset, Orion generated 52 research reports, of which human scientist review prioritized 22 plausible mechanistic hypotheses. These results show that computer-using AI agents can substantially expand the reach of laboratory automation, providing a scalable and auditable route from experimental imaging data to quantitative analysis, reports and biologically grounded hypotheses.
Mixture-of-Experts (MoE) architectures efficiently scale Large Language Models (LLMs) by activating only a small fraction of their experts per token, yet the full parameter count - dominated by the expert parameters - must be held in training and inference memory. To address this, we introduce Expert Tying, an architectural modification that shares expert parameters across consecutive transformer layers while preserving independent, layer-wise routing and attention. We evaluate this approach across common, state-of-the-art architectures, including OLMoE, Qwen3, and DeepSeek-style MoEs. Our pretraining experiments demonstrate that tying experts can reduce memory footprint by almost 2x at virtually no degradation in perplexity or downstream quality. By exploiting the parameter redundancy inherent in MoE pathways, our method provides a highly favorable compute-to-memory trade-off, advancing efficient training and scaling of next-generation LLMs.
Most existing approaches either fix the container in advance or optimize only a single container dimension through an outer search loop, leaving the remaining dimensions as a manual tuning problem. We present a differentiable packing framework that jointly optimizes all 6N object pose parameters and all three container side lengths inside a single gradient-based loop. The formulation combines six physics-inspired, differentiable loss terms computed directly on triangle meshes through axis-aligned bounding-box proxies. An adaptive squeezing mechanism periodically tightens the container whenever the overlap loss falls below a pair-count-scaled threshold, producing a large initial drop in container volume, followed by small refinements. All pairwise computations are written in tensor-broadcasting form, giving a 3.4 to 54 times speedup over a reference loop-based implementation. The pipeline is implemented in Python and PyTorch, with no physics engine, FFT library, or convex decomposition. On multiple object categories, the method produces containers that are 11 to 32 percent smaller than time-matched DBLF and simulated-annealing baselines at N =100, while running in under 4 minutes per instance on a single consumer GPU.