Academic Intelligence · Curated Daily

探索全球前沿学术脉络

AcademicHub 汇聚顶级期刊与预印本平台的实时文献。定制您的专属科研雷达,利用大语言模型自动生成交叉领域文献分析简报。

01.
arXiv (CS.AI) 2026-06-12

Is It You or Your Environment? A Bayesian Inference Framework for Genomically-Anchored Personalized Physiological Interpretation

arXiv:2606.13556v1 Announce Type: new Abstract: Personalized health AI systems face a fundamental cold-start problem: machine learning models for physiological interpretation require weeks of individual behavioral data before they can distinguish constitutional variation from environmentally driven deviation. We propose a solution grounded in causal inference and Bayesian prior design. An individual's genomic profile serves as an exogenous genetic anchor – a domain-informed, personalized prior that is fixed at conception, immune to reverse causation, and available before a single behavioral observation is collected. The anchor initializes a Bayesian belief state over an individual's physiological set point G-hat = mu + sum(beta_i * g_i), where beta_i are GWAS-derived effect sizes and g_i are risk-allele counts. Each incoming physiological measurement P produces a non-constitutional deviation delta = P - G-hat that separates the signal attributable to environment and state from the constitutionally fixed baseline. As behavioral data accrue, the prior decays according to G-hat_t = w(t)*G-hat_genomic + [1-w(t)]*P-bar_t, transitioning from genome-dominated to empirical-baseline-dominated inference. The same observed HRV of 55 ms generates a suppression hypothesis for a person whose prior predicts 80 ms, and an enhancement hypothesis for a person whose prior predicts 30 ms – a reversal impossible without a personalized anchor. We develop this architecture across six physiological domains, grading genomic priors by evidence strength, distinguishing robustly replicated anchors (FTO, FADS1/2, FKBP5) from contested candidate genes (SLC6A4, MAOA, DRD2). We address the inference boundary between association, Mendelian randomization, and individual token causation, and define four constraints for deployment: evidence-graded priors, dynamic decay, ancestry-matched effect sizes, and attribution rather than deterministic output.

02.
arXiv (CS.AI) 2026-06-17

DeepInsight: A Unified Evaluation Infrastructure Across the Physical AI Stack

arXiv:2606.17574v1 Announce Type: new Abstract: Evaluating a Physical AI stack spans operators that differ by more than three orders of magnitude – from a single foundation-model decoding step to thousands of physics ticks of whole-body control – varying orthogonally in modality, reward semantics, and resource profile. No existing framework spans this range, so the stack is evaluated today by stitching together separate harnesses that share neither runtime nor scoring, preserving each segment's local validity but losing the shared identity needed to diagnose cross-layer regressions. We present DeepInsight, an evaluation infrastructure that serves this full spectrum on a single runtime. Rather than homogenize the regimes, it preserves their heterogeneity behind three narrow abstractions – task, resource, and result – each realized as one invariant shared by every subsystem: one episode driver, one resource-handle protocol implemented by every expensive backend (LLM inference and sandboxed runtimes alike), and one trace identity scheme under which every event is written. Deployed in production across all three layers of an embodied humanoid stack, this single set of invariants onboards new benchmarks largely by configuration. Where mature peer orchestrators exist – at the foundation-model end – it reproduces published references and peer-framework readings within their own spread, runs the same suites faster on a single node, and scales near-linearly across nodes. Its distinctive return is diagnostic: because every layer writes into one shared trace, a regression that begins in one layer and surfaces in another stays localizable on that trace – a cross-layer payoff no federation of per-segment harnesses can reproduce.

03.
arXiv (CS.AI) 2026-06-16

The Perils of Agency: How Developers Perceive, Prioritize, and Address Risks in Agentic AI Products

arXiv:2606.15485v1 Announce Type: cross Abstract: Agentic AI systems act autonomously, use tools, adapt to context, and operate in complex real-world environments. However, these same characteristics can create or exacerbate product risks. We studied how industry developers (n=35) perceive, prioritize, and address the risks in their agentic AI products. We found that developers' perceptions of risk were closely tied to the qualities that made the product agentic, such as autonomy, tool use, and usage in a real-world context. Developers prioritized product and business risks before considering downstream societal risks like job displacement and end-user privacy. This prioritization also impacted developers' ability and motivation to mitigate agentic risks. Finally, developers lacked mature controls for containing agentic risks, often relying on constraining the same characteristics that make agents useful: e.g., autonomy and goal complexity. These findings reveal a capability vs. risk control tension in agentic AI development: developers need to address risks that emerge from agentic capabilities, yet they currently have limited support for doing so without constraining agentic functionality.

04.
medRxiv (Medicine) 2026-06-15

Pulmonary extracellular vesicles drive alveolar macrophage dysfunction via microRNA transfer in Acute Respiratory Distress Syndrome

Background: Alveolar macrophage (AM) dysfunction contributes to Acute Respiratory Distress Syndrome (ARDS) pathogenesis. We investigated the role of extracellular vesicles (EVs) in mediating this dysfunction. Methods: Pulmonary EVs were isolated from broncho-alveolar lavage and non-directed bronchial lavage samples of ventilated sepsis patients with and without ARDS, and post-operative control patients via ultracentrifugation. AMs were isolated from lung tissue resections of lobectomy patients. AMs were treated with pooled EVs for 24 hours prior to functional, metabolic and autophagy profiling. EV cargo was profiled via small RNA transcriptomics and proteomics. Mechanistic role of EV microRNAs was assessed via mimic / antagomir transfection. Results: Pulmonary EVs from sepsis patients with ARDS impaired AM efferocytosis, and control EVs had no effect. ARDS EV treatment enhanced AM mitochondrial-linked respiration, but not glycolysis. ARDS EV treatment impaired LC3B-II and LAMP1 expression, indicating dysregulated AM autophagy-lysosomal machinery. Proteomics revealed downregulation of innate immune pathways in ARDS EVs. Transcriptomics revealed enrichment of 24 microRNAs in ARDS EVs; miR-652-3p was the most enriched, validated by RT-qPCR. EV miR-652-3p was associated with 90-day mortality (9.20 vs 0.59 RQ, p=0.0295) and inversely correlated with oxygenation (PaO2/FiO2). AM transfection with miR-652-3p mimic induced similar dysregulation of function and autophagy as ARDS EVs. Transfection of ARDS EVs with antagomirs to miR-652-3p prior to AM treatment partially rescued efferocytosis and autophagy. Conclusions: Targeting EV miR-652-3p may restore alveolar macrophage function and reduce excessive inflammation, thus offering a novel therapeutic strategy for patients with ARDS.

05.
bioRxiv (Bioinfo) 2026-06-12

A Graph-based QSAR Modeling Pipeline for Predicting In vitro PubChem Assays and In vivo Human Hepatotoxicity: Mechanistic Analysis of Caspase-3/7 Activation

Background: Caspase-3 and -7 are key effector caspases in the apoptotic pathway, a form of programmed cell death, and their activities serve as a well-established biomarker for evaluating environmental chemical toxicity and informing chemical risk assessment. Loss of mitochondrial membrane potential is a key event in the activation of Caspase-3/7 signaling and the subsequent induction of apoptosis. Therefore, simultaneous assessment of mitochondrial membrane potential and Caspase-3/7 activity enables elucidation of the mechanisms and pathways through which apoptosis is initiated. Rapid and accurate assessment of the potential toxicity of environmental chemicals and drugs remains a major challenge. Quantitative Structure Activity Relationship (QSAR) modeling have been widely used for toxicity prediction. Graph-based approaches encode compounds directly as molecular graphs, allowing structure-activity relationships to be learnt from molecular topology without the information loss in binary fingerprints. While advanced graph models such as graph transformers (GTs) have shown outstanding performance in many domains, they have not been fully leveraged in QSAR modeling on Caspase and mitochondrial toxicity. Methods: We propose a QSAR modeling pipeline that encompasses assay data preprocessing, feature representations (fingerprints and molecular graphs), and benchmarking machine learning (ML) models, including classic ML models, graph neural networks (GNNs), GTs, and their consensus ensembles. Based on in vitro Caspase and mitochondrial assays in PubChem, we applied the pipeline to predict Caspase-3/7 activation and mitochondrial membrane potential (MMP). Beyond in vitro assays, we also built in vivo QSAR modeling for FDA Drug-Induced Liver Injury (DILI) gold standard on human hepatotoxicity. Moreover, mechanistic analysis on Caspase-3/7 activation was conducted by comparing with MMP disruption to identify chemical substructures that may be responsible for dual activations. We also investigated cell-line-specific responses by identifying structural motifs that selectively induce Caspase-3/7 activation in individual cell lines.Results:Experimental evaluations show that GTs and GNNs outperformed classic ML models when the number of active compounds is large, such as MMP disruption, while classic ML models and GTs performed good for highly imbalance data with limited active compounds, such as Caspase-3/7 activation. For DILI prediction, the full consensus model achieved the highest AUC 0.69 and Graphormer had the highest F1 score 0.79, both surpassing the previous best model with AUC 0.63 and F1 0.65 with a large margin.Our mechanistic analysis shows that phenolic compounds bearing a para-hydroxyphenyl motif, as well as members of the lipophilic chain family with long alkyl chains can trigger the collapse of MMP, leading to the activation of caspases-3 and -7. Human embryonic kidney (HEK293) was the only cell line with a distinct structural motif: 1,1-dichloroethane and chlorobenzene. Human neuroblastoma (SK-N-SH) is uniquely impacted by an epoxide fragment and rat hepatoma (H-4-II-E) is uniquely impacted by a tetramethylcyclohexene motif and an acetaldehyde fragment.Conclusions:The proposed pipeline for QSAR modeling, including data preprocessing, feature representations, and incorporation of advanced graph ML approaches, is highly effective in predicting not only on Caspase-3/7 activation and membrane potential collapse, but also on FDA DILI human hetatotoxicity. As future research directions, we will leverage extra information, e.g., biological activity and findings in existing toxicity literature, and recent advances in large language models and agentic AI to further improve the predictive performance and enable a sensitive and specific framework for assessing human hepatotoxicity of environmental compounds.

06.
arXiv (CS.CV) 2026-06-16

3D Consistency Optimization for Self-Supervised Monocular Video Depth Estimation

Reliable monocular video depth estimation is crucial for downstream 3D reasoning and embodied AI in endoscopic navigation. However, existing self-supervised approaches typically treat video frames independently or rely on weak temporal regularization. These methods, lacking a holistic perception of the underlying 3D scene, inevitably suffer from geometrically inconsistent predictions and severe cross-frame drift. To address these limitations, we introduce a new paradigm that recasts sequential video depth estimation as an unconstrained multi-view 3D reconstruction problem, enabling full exploitation of the powerful geometric priors embedded in recent 3D foundation models. The core of our approach is a 3D consistency optimization framework driven by three constraints: image-level photometric rendering, explicit world-coordinate geometric alignment, and multi-scale temporal gradient consistency. Such unified optimization elegantly anchors isolated frames to a globally coherent 3D structure. Our method has been validated in both the self-supervised training scenarios and challenging zero-shot clinical environments. Results show that the proposed approach achieves state-of-the-art spatial accuracy, outperforming the frame-based, video-based depth estimators and the multi-view 3D reconstruction baselines.

07.
arXiv (CS.CV) 2026-06-16

Transformation-driven generation of comparable projection images from multimodal anatomical scenes

This work addresses the computational problem of generating reproducible projection-space observations from heterogeneous anatomical scenes whose components may undergo independent spatial transformations. We propose a transformation-driven framework for synthetic projection imaging from multimodal anatomical data and demonstrate it on mandibular-motion scenarios. In contrast to conventional Digitally Reconstructed Radiograph (DRR) approaches primarily designed for registration, projection realism, or rendering efficiency, the proposed formulation treats projection imaging as an observation process operating on an explicitly represented anatomical scene. Independently transformable volumetric and surface-based anatomical objects are embedded within a shared scene representation and propagated directly into projection space through explicit transformations. Projection geometry, acquisition modelling, material interpretation, and image presentation remain explicitly separated, enabling controlled exploration of methodological assumptions while preserving reproducibility and direct comparability between generated projections. Particular emphasis is placed on transformation-driven anatomical scenarios relevant to craniofacial analysis, including mandibular motion and therapeutic repositioning. Using a shared anatomical reference scene composed of CT/CBCT volumes, segmented structures, surface models, and auxiliary anatomical or therapeutic objects, the framework enables generation of directly comparable VirtualRTG projections from multiple anatomical configurations while preserving identical imaging assumptions. Rather than aiming at fully physically faithful radiographic simulation, the proposed approach provides a controllable and reproducible methodological environment for studying anatomy–projection relationships, motion observability, and transformation-aware imaging workflows.

08.
arXiv (CS.LG) 2026-06-11

Reinforcement Learning with Action-Triggered Observations

arXiv:2510.02149v2 Announce Type: replace Abstract: We introduce Action-Triggered Sporadically Traceable Markov Decision Processes (ATST-MDPs), a reinforcement learning framework for partial observability in which full state observations occur stochastically at each step, with probability determined by the chosen action. We derive Bellman equations tailored to this setting and establish the existence of an optimal policy. Exploiting the fact that sporadic observations reveal the full state, we provide an equivalent formulation in which agents commit to action-sequences between consecutive observations. Under the linear MDP assumption, we show that the value function over such action-sequences admits a linear representation in a finite-dimensional feature map, enabling standard regression-based methods. As an application, we derive ATST-LSVI-UCB, an optimistic algorithm achieving regret $\widetilde{O}(\sqrt{Kd^3(1-\gamma)^{-3}})$ for episodic learning with geometrically distributed horizons, where $K$ is the number of episodes, $d$ the feature dimension, and $\gamma$ the discount factor (episode continuation probability), matching the known rate for linear MDPs with full observability.

09.
arXiv (CS.LG) 2026-06-16

Agent trajectories as programs: fingerprinting and programming coding-agent behavior

arXiv:2606.16988v1 Announce Type: cross Abstract: Benchmark scores tell you what an agent got right; they do not tell you how it got there. In this work, we introduce methods for comparing agents procedurally in different contexts, where the model, tasks, and approaches vary. We compare ten agents and find that they are identifiable by their behavioral habits, which we define as fingerprints: a probe over these procedural signatures attributes an unseen trajectory to the correct agent at 85.7% accuracy, controlling for leakage across tasks. We develop procedural representations for agent problem-solving procedures with an emergent vocabulary induction technique that is meant to be maximally compressive to avoid surface-level variation while being expressive enough to unveil the quirks of the models' patterns. We apply our framework to the software engineering evaluation dataset SWE-Bench to study the structural distinctness of agent trajectories and find that behavior is most similar between models from similar release periods and those that are distilled from one another (e.g., a distilled student model and its teacher have a Jensen-Shannon divergence of 0.25, about half the distance between other model pairs). As more models saturate evaluations, we believe that it will be important to probe model behavior along more holistic dimensions than success rates alone. We introduce ProcGrep, a library for auditing and evaluating agents for how they approach tasks at a procedural level given their traces in a top-down fashion. We believe this work has a range of applications to help developers work with and program coding agents, such as task-aware model routing, agent monitoring, and finer-grained cost analysis.

10.
Nature (Science) 2026-06-10

In situ nanocrystal confinement for efficient blue perovskite LEDs

Metal halide perovskites have emerged as promising semiconductors for light-emitting diodes (LEDs) owing to their excellent luminescence properties1. However, their performance remains limited, primarily owing to the inherent contradiction between ‘high crystallinity’ and ‘small size’ in the in situ synthesis of perovskite nanocrystals on substrates. Here we report efficient blue perovskite LEDs (PeLEDs) achieved via in situ polymerization-driven nanocrystal confinement to synthesize perovskite films composed of high-quality nanocrystals. The in situ-formed polymer network imposes nanoscale spatial constraints during perovskite nanocrystal growth, enabling nanocrystals with small sizes and a high photoluminescence quantum yield of 83%. Furthermore, polymerizable monomers with sufficient coordination sites allow a prolonged lattice rearrangement of perovskite clusters, promoting the crystallinity of the nanocrystals. The synthesized perovskite nanocrystals are utilized in the fabrication of PeLEDs, resulting in an external quantum efficiency of 21.8% at 491 nm, which is among the highest performances in blue PeLEDs. This work simultaneously controls the thermal dynamics of perovskite crystallization and organic ligand reactions, which helps to advance understanding of the effect of ligand engineering on nanocrystal synthesis, benefiting the development of efficient PeLEDs and other optoelectronic technologies. Efficient blue perovskite light-emitting diodes with an external quantum efficiency of 21.8% are achieved through in situ polymerization-driven nanocrystal confinement.

11.
arXiv (CS.CV) 2026-06-18

FlowObject: Flow Steering for Bridging Generative Priors and Reconstruction Fidelity

Recovering complete 3D representations of objects from few casual image captures remains a significant challenge. Recent 3D generative models, particularly those based on Flow-Matching (FM), can synthesize high-quality textured assets; however, they often suffer from ''synthetic bias'' where learned priors override observational evidence, alongside a lack of alignment with the observed instance. Conversely, optimization-based methods like 3D Gaussian Splatting (3DGS) provide high fidelity on visible surfaces but fail to reason about unobserved geometry. In this paper, we present FlowObject, a framework that reformulates sparse-view 3D reconstruction as a training-free, guided inverse problem. Our approach applies a dual-space guidance strategy to steer the Ordinary Differential Equation (ODE) trajectory of a flow-matching model, enabling the completion of unseen regions through learned generative priors while enforcing strict consistency with real-world observations. By integrating a 3DGS refinement stage, FlowObject further bridges the gap between ''synthetic-looking'' generative outputs and photorealistic reconstructions. Comprehensive benchmarks on synthetic and real-world datasets demonstrate that current state-of-the-art methods often struggle to achieve geometric completeness and observational consistency simultaneously, especially under severe occlusions. In contrast, our method significantly outperforms state-of-the-art generative models and optimization-based frameworks in both geometric completeness and view-dependent appearance fidelity.

12.
arXiv (CS.LG) 2026-06-19

Algebraic Dead Directions in LayerNorm Transformers: A Forward-Pass-Only Diagnostic at LLM Scale

arXiv:2606.19491v1 Announce Type: new Abstract: Pretrained transformers sit near singular minima of the loss, where the Fisher information metric degenerates along dead directions: directions in parameter space along which the directional Fisher vanishes. Locating such a direction normally needs a forward pass and an eigendecomposition of activations, or a sampling-based complexity estimate; none returns a direction computable from the network's parameters alone. We give one, for LayerNorm transformers. The inverse-scale direction $\gamma^{-1}/\|\gamma^{-1}\|$ of the LayerNorm affine is an exact algebraic kernel of the post-final-norm centred activation covariance, for any input distribution, and induces a corresponding dead direction in parameter space. It is read from the LN scale parameter alone, with no forward or backward pass and no eigensolve: the cheapest dead-direction read, specific to LayerNorm. We test it on $14$ pretrained transformers ($9$ LayerNorm, $5$ RMSNorm; $160$M-$35$B; language and vision objectives). At random initialisation the predicted direction matches the measured bottom singular direction (one forward pass, direct SVD) to four decimal places on $9/9$ LayerNorm models, and is correctly absent on $5/5$ RMSNorm models, which lack the mean-subtraction projector that creates it. On the trained checkpoint the covariance eigenvalue along this direction deepens by ${\sim}10^3\times$ and further dead directions open; the random-init-to-trained gap is a one-forward-pass, per-checkpoint readout of singular structure along the predicted coordinate. Two consequences follow in closed form: the residual stream's smallest singular value is preserved block-to-block on $13/14$ transformers measured on their own input distribution, the one exception (Gemma$4$-$31$B) a genuine dead direction the same read pinpoints; and the kernel direction's presence classifies a transformer's normalisation from the parameters alone.

13.
arXiv (quant-ph) 2026-06-11

Machine-learned, finite temperature Fermi-operator expansions suitable for GPUs and AI-hardware

arXiv:2605.08523v2 Announce Type: replace Abstract: We present several finite-temperature recursive Fermi-operator expansion schemes based on the second-order spectral projection (SP2) method. Our approach builds on a previous observation that the electronic structure problem, as formulated through a recursive SP2 expansion, can be mapped onto the architecture of a deep neural network. Using this perspective, we generalize SP2 to finite electronic temperatures by constructing machine learning models that determine optimized recursive expansion coefficients. The same approach is also applied to the prediction of the electronic entropy for fractional occupation numbers. The coefficients are trained for a specified chemical potential and electronic temperature and are not available in closed analytical form. However, by employing an appropriate affine rescaling strategy to the Hamiltonian matrix, we eliminate the need to retrain the model for different temperatures and chemical potentials. Our approach avoids explicit diagonalization and relies solely on highly optimized matrix-matrix multiplication kernels. Compared to state-of-the-art diagonalization, we achieve an order-of-magnitude speedup in the single-particle finite-temperature density matrix calculation for small and moderately sized matrices on modern GPUs and dense matrix multiply units.

14.
arXiv (CS.CL) 2026-06-19

What sentiment analysis can't see: Measuring whether customers were helped, and what went wrong, across 70,000 support conversations

Most companies read their customer support data at scale using sentiment analysis, which measures how customers sound rather than whether they were satisfied with the result. We tested a richer alternative on 70,450 support conversations from a leading online fundraising platform: alongside tone, we used GPT-5.4 to estimate each customer's satisfaction and to flag whether they reported a concrete problem, then validated all three readings against the 1-to-5 ratings customers left on the conversations they rated. The satisfaction estimate tracked those ratings far better than sentiment did, correlating at 0.47 against 0.36 and flagging unhappy customers with far fewer false alarms. The structured read also sees what sentiment cannot: tone and satisfaction disagree in 44% of conversations, a single "Neutral" label hides everything from quietly satisfied customers to ones who quietly gave up, and the largest group of all is "tolerated friction," customers who are satisfied but still reporting a fixable problem, a standing issue that no sentiment-based dashboard can surface. The broader finding is that LLM-based annotation can capture far more than the tonality of a customer's language, offering strong potential for new business metrics grounded instead in the customer's state (whether they were satisfied) and the cause of their problem extracted directly from the raw textual data of interactions and feedback.

15.
medRxiv (Medicine) 2026-06-11

Long-term exposure to PM2.5 components and lipid profiles in WTC Health Program general responders

Fine particulate matter (PM2.5) was found to be associated with elevated blood lipids, but fewer studies have examined the associations with specific constituents of PM2.5. We studied the associations between exposure to annual PM2.5 and its 14 constituents, and repeated blood lipid measurements among general responders enrolled in the World Trade Center Health Program between 2003 and 2019 (n = 44,876). We used generalized additive mixed effect models to investigate the single-pollutant associations with repeated measures of blood total cholesterol (TC), high and low-density lipoprotein (HDL-C and LDL-C) levels. We then used linear generalized weighted quantile sum regression with a random intercept for participant ID to account for the clustering of repeated measures and evaluate the combined associations with the component mixture. A decile increase in the mixture of 14 PM2.5 chemical components was associated with 0.375 mg/dL increase in TC levels (95% confidence Interval (CI): 0.174-0.577) and 0.302 mg/dL increase in LDL-C (95% CI: 0.063, 0.540). Lead, organic carbon, and iron were major drivers of both associations. Component-specific models also show higher TC and LDL levels associated with interquartile range increases in organic carbon (0.472, 95% CI [0.027, 0.918] and 0.648 95% CI [0.136, 1.160]) and iron exposure (1.081, 95% CI [0.630, 1.532] and 0.748, 95% CI [0.318, 1.178]). In conclusion, we found PM2.5 exposure to be associated with elevated lipid levels. The associations differed by PM2.5 composition, highlighting organic carbon, lead, and iron and major drivers. These findings are highly significant for a population exposed to extreme air pollution event and susceptible to lipid alterations that might trigger cardiovascular events.

16.
arXiv (CS.LG) 2026-06-18

Bridging Data Gaps in Structural Fragility Modeling through Transfer Learning: Methodology and Case Studies

arXiv:2606.18567v1 Announce Type: cross Abstract: This paper presents a methodology-centered transfer learning framework for fragility adaptation under domain shift, class imbalance, and scarce target labels while preserving engineering interpretability and supporting decision-making under uncertainty. Four transfer learning strategies (instance-based, parameter-based, hierarchical Bayesian, and multi-source) are demonstrated through three complementary case studies: (i) instance-based transfer learning via importance weighting, demonstrated on coastal bridge fragility using Hurricane Katrina observations; (ii) parameter-based transfer learning together with hierarchical Bayesian transfer learning, enabling partial pooling across strata and posterior uncertainty quantification, demonstrated on residential building fragility using Hurricane Ian observations; and (iii) multi-source transfer learning that fuses multiple analytical fragility models with learned source weights and regularized target-domain adaptation, demonstrated on seismic bridge fragility using observations from the 2001 Nisqually earthquake. Across these case studies, direct transfer of source models (i.e. using existing state-of-the-art models) fails under domain shift and severe class imbalance, while targeted adaptation substantially improves failure detection and predictive stability in low-data regimes. These findings highlight the need for systematic guidance on diagnostics, strategy selection, and uncertainty reporting when developing and adapting fragility models.

17.
arXiv (CS.CV) 2026-06-17

Advances in 4D Representation: Geometry, Motion, and Interaction

We present a survey on 4D generation and reconstruction, a fast-evolving subfield of computer graphics whose developments have been propelled by recent advances in neural fields, geometric and motion deep learning, as well as 3D generative artificial intelligence (GenAI). While our survey is not the first of its kind, we build our coverage of the domain from a unique and distinctive perspective of 4D representations, to model 3D geometry evolving over time while exhibiting motion and interaction. Specifically, instead of offering an exhaustive enumeration of many works, we take a more selective approach by focusing on representative works to highlight both the desirable properties and ensuing challenges of each representation under different computation, application, and data scenarios. The main take-away message we aim to convey to the readers is on how to select and then customize the appropriate 4D representations for their tasks. Organizationally, we separate the 4D representations based on three key pillars: geometry, motion, and interaction. Our discourse will not only encompass the most popular representations of today, such as neural radiance fields (NeRFs) and 3D Gaussian Splatting (3DGS), but also bring attention to relatively under-explored representations in the 4D context, such as structured models and long-range motions. Throughout our survey, we will reprise the role of large language models (LLMs) and video foundational models (VFMs) in a variety of 4D applications, while steering our discussion towards their current limitations and how they can be addressed. We also provide a dedicated coverage on what 4D datasets are currently available, as well as what is lacking, in driving the subfield forward. Project page:https://mingrui-zhao.github.io/4DRep-GMI/

18.
medRxiv (Medicine) 2026-06-17

Cross-Device Adaptation of Mirai for Mammography-Based Breast Cancer Risk Prediction

Fine-tuning can adapt pretrained medical imaging models to new clinical datasets, but device-specific domain shifts may limit generalizability. We evaluated Mirai, a mammography-based deep learning model for breast cancer risk prediction, in a large screening cohort containing Hologic and General Electric (GE) full-field digital mammography systems, including GE Premium View (GE PV) and Tissue Equalization (GE TE) post-processing software. Native Mirai showed lower performance on TE images than on Hologic or PV images. Fine-tuning on TE images improved TE performance, particularly for short-term risk prediction, but substantially reduced performance on Hologic images, consistent with catastrophic forgetting. To mitigate this effect, we developed a device-invariant model using interleaved multi-device sampling and conditional adversarial training. This approach largely restored Hologic performance while maintaining improved TE performance, providing better robustness across heterogeneous imaging platforms. Comparison of cumulative and annual risk AUCs over a five-year time horizon further showed that performance gains were driven mainly by short- and intermediate-term predictions. These findings highlight both the value and dangers of device-specific fine-tuning and support balanced domain-adaptation strategies for deploying mammography-based risk models across diverse clinical imaging environments.

19.
arXiv (CS.CV) 2026-06-11

Finding Sparse Subnetworks in One Training Cycle via Progressive Magnitude-Based Pruning

Neural network pruning reduces model size by removing less important parameters while aiming to preserve predictive performance. Although the Lottery Ticket Hypothesis (LTH) shows that sparse subnetworks can match dense networks when trained from suitable initializations, its iterative pruning procedure requires multiple complete training cycles. This work evaluates progressive magnitude-based pruning as a single-cycle alternative. The method gradually increases sparsity during training using a linear schedule and updates pruning masks based on active weight magnitudes. We conduct systematic experiments on CIFAR-10 and MNIST across ResNet, VGG-style, and LeNet architectures, comparing the proposed method with representative iterative and initialization-based pruning baselines, including LTH, SNIP, and GraSP. On CIFAR-10, the method achieves 95.12\% accuracy on ResNet-18 at 72.9\% sparsity, compared with 90.5\% reported for LTH. At extreme sparsity, it achieves 93.13\% accuracy on a VGG-like architecture at 97\% sparsity, compared with approximately 92.0\% for SNIP, and 93.44\% accuracy on VGG-19 at 97.97\% sparsity, compared with 92.19\% for GraSP at 98\% sparsity. A sparsity-accuracy analysis on ResNet-18 further shows that accuracy remains within 0.1 percentage points of the dense baseline across 70–85\% sparsity. These results indicate that progressive magnitude-based pruning provides an effective single-cycle approach for neural network sparsification under the evaluated settings.

20.
arXiv (CS.CL) 2026-06-15

EmoMind: Decoding Affective Captions from Human Brain fMRI

Decoding visual experience from brain activity has advanced substantially, but current brain-to-text systems largely recover semantic content while discarding affect. Additionally, language models can generate emotional text when prompted with categorical labels, but such labels collapse rich inter-subject variability into coarse discrete bins. We present EmoMind, the first end-to-end pipeline for decoding affective captions directly from fMRI signals. EmoMind first retrieves a semantically grounded neutral scene description from brain-decoded visual features, then rewrites it using a continuous 34-dimensional emotion vector decoded from the same fMRI recording. To control the balance between content preservation and affective expression, we train the rewriter with classifier-free guidance against an identity-preserving null branch, enabling smooth interpolation between semantic fidelity and affective expressivity. We evaluate affective caption generation with a three-axis validation framework spanning subject-specificity, structural geometry, and causal control. We further augment this framework with a synthetic-brain substitution test that probes robustness to the measurement apparatus, and we benchmark each axis against GPT-4 prompted with brain-decoded top-5 emotion labels as a strong discrete baseline. Across two independent emotion fMRI datasets, EmoMind significantly outperforms label-prompted GPT-4 on all three axes, with the largest gains on metrics that require person-specific affective structure rather than population-level emotion aggregation. These results establish continuous brain-decoded affect as a viable control signal for individualized affective caption generation and open new directions for studying individual affective brain organisation.

21.
arXiv (CS.LG) 2026-06-16

Transformers Learn the Mestre-Nagao Heuristic

arXiv:2606.15036v1 Announce Type: new Abstract: We train a two-layer transformer encoder to classify rational elliptic curves $E/\mathbb{Q}$ of conductor $\leq 10000$ as either rank 0 or rank 1 from the first 128 normalized Frobenius traces. We achieve >99% accuracy on both classes, and accuracy is essentially unchanged on test curves with no isogeny or quadratic-twist relative in the training set. We then apply techniques from mechanistic interpretability such as attention analysis, linear probing, activation patching, logit attribution, and neuron-level circuit analysis to reverse-engineer the algorithm the (centroid in function space) model learned. We find that a sparse circuit of 20 out of 512 layer-1 MLP neurons is sufficient for rank prediction under a linear probe with an AUROC of 0.992 at plateau, implementing a push-pull detector architecture of rank-0 and rank-1 detectors with a one-sided readout. However, we notice that the model has sub-optimal readout problems indicating a mismatch in rank-order between the readout pathway and the discriminative circuit. Critically, the learned input weights of the top discriminating neuron match the Mestre-Nagao sum heuristic weights $\log(p)/(p\cdot \log{B})$ with a Spearman coefficient $r = 0.997$ and Pearson coefficient $r = 0.952$: the model has learnt a result from analytic number theory from the Frobenius trace data alone. We additionally find that all 50 independently trained models concentrate CLS attention on prime positions at 2-50$\times$ the rate of composite positions. The CLS embedding encodes $\log{L(E,1)}$ with $R^2 = 0.962\pm 0.011$ across the 50 models (after controlling for the conductor). Activation patching analysis reveals that attention weights are dissociated from causal information flow. Additionally, the 50 solutions from training are near-identical in function space (with pairwise agreement $>$98.8%) despite large weight space barriers.

22.
arXiv (CS.AI) 2026-06-16

Recurrent Reasoning on Symbolic Puzzles with Sequence Models

arXiv:2606.15686v1 Announce Type: new Abstract: Large language models often appear strong on symbolic and algorithmic tasks, yet this apparent strength can hide brittle behaviour when problems become longer, harder, or slightly out of distribution. A major limitation of current reasoning benchmarks is that many primarily test whether a model can produce a valid answer, while paying less attention to whether the solution is minimal, robust, and stable under controlled difficulty scaling. We introduce RecurrReason, a difficulty-controlled benchmark of four recurrent logic puzzles (Tower of Hanoi, River Crossing, Block World, and Checkers Jumping) with BFS-optimal trajectories and a single interpretable difficulty parameter $N \in \{1,\dots,10\}$, totalling 10{,}817 unique puzzles and 285{,}933 moves. We benchmark two Transformer families, an encoder-decoder model (T5-style) and a decoder-only model (GPT-2-style), under consistent data splits and evaluation criteria, training on $N{=}1$ to $7$ and evaluating on both held-out in-distribution instances and harder out-of-distribution instances at $N{=}8$ to $10$. Fine-tuned pre-trained T5 achieves 97.27\% validation and 81.00\% OOD accuracy on Block World; all models score 0.00\% on River Crossing under all conditions. Failure mode analysis reveals that architecture is a stronger determinant of success than scale. Pre-training transfers only to puzzles with locally structured transition functions. Our code and dataset will be open-sourced upon acceptance.

23.
arXiv (quant-ph) 2026-06-17

Microwave-free vector magnetometry and crystal orientation determination with Nitrogen-Vacancy centers using Bayesian inference

arXiv:2512.13835v2 Announce Type: replace Abstract: Nitrogen-vacancy (NV) centers in diamond provide a solid-state platform for quantum sensing. While optically detected magnetic resonance techniques offer high sensitivity, their reliance on microwaves introduces heating and stray electromagnetic fields that can perturb nearby samples. Optical approaches based on cross-relaxation between differently oriented NV centers remove this constraint but have so far required stringent alignment of the external field with crystallographic axes, restricting their practicality. Here we introduce a general framework for microwave-free vector magnetometry at near-zero field that leverages Bayesian inference to extract both the magnetic field vector and the NV orientation directly from photoluminescence maps. An analytical model of cross-relaxation resonances enables efficient inference under arbitrary field and orientation configurations, while naturally incorporating the discrete degeneracies of the NV symmetry. We experimentally demonstrate robust orientation determination and vector-field reconstruction, establishing a general route toward compact and alignment-free NV magnetometers for practical sensing applications.

24.
bioRxiv (Bioinfo) 2026-06-18

Metrics for Evaluating Biological AI Model Predictive Accuracy at the Data-Substrate Level

作者:

Reports in the biological literature disagree on whether a given model can predict a biological outcome from a given data sample — one study finding a model capable, another, on the same kind of data, finding it is not. This is particularly a challenge in relation to LLMs–where the models are large and opaque, with weights and training data inaccessible.textbf{ }Such disagreements cannot be settled by directly inspecting the model. To address this challenge, we considertextbf{ }an alternative approach: assessing whether the data sample is adequate to support the prediction asserted. For a given dataset, its substrate — the underlying structure of the data — determines what any model can recover, independent of architecture or capacity. At the same time, predicting the present state of a biological process and predicting the direction of its future change are different tasks; the second is supportable among AI models only where the data encode direction as determinable from the state — a property we call encoding — and is unsupportable where the same observed state precedes change in opposite directions — a property we call non-identifiability, in the informational rather than the statistical sense. We introduce two generic metrics, Predictive Blindness Risk (PBR) and Prediction Indeterminacy Measure (PIM), that evaluate a data substrate for predictive accuracy directly — without access to model weights, architecture, or training data — and locate the regions of a data substrate where a predictive claim can be supported and where it cannot. Using human biological subjects, we employ the Yale Brain Metastases Longitudinal Data (1,430 human subjects; 11,892 MRI studies; four sequences) and show that direction of change was non-identifiable across regions encompassing the majority of transitions; a nonlinear AI model gained essentially nothing over majority-direction prediction there while recovering direction near-perfectly where the state encoded it; and model accuracy tracked data-substrate resolvability continuously (Spearman {rho} = -0.95 to -1.00). The metrics adjudicate, before any model is trusted and from the data alone, where claims of predictive accuracy — of state, or of the law of change — can be supported.

25.
arXiv (CS.LG) 2026-06-11

Space-sampled Value Decay: Forgetting Mechanisms for Non-stationary Deep Reinforcement Learning

arXiv:2606.11797v1 Announce Type: new Abstract: Studies on rodents such as mice have shown the capabilities to adapt their behavior when dealing with changing parameters (``drift'') of the environment even if no information about change is provided (uncertainty) – a behavior that can be modeled by forgetting mechanisms. Non-stationary Reinforcement Learning (NSRL) deals with adapting state-of-the-art RL methods to deal with changing environments: these however usually require (partially) perfect information about the drift such as ``task IDs'' or ``context''. To mitigate the effects of drift, this work develops Space-sampled Value Decay as an explicit forgetting mechanism for value-based deep RL architectures as a simple yet effective approach. In particular we demonstrate and discuss positive effects but also limitations in achieved returns for modifications of Deep Q-networks (DQN) and Soft Actor-Critic (SAC) when evaluated on non-stationary environments.