Academic Intelligence · Curated Daily

探索全球前沿学术脉络

AcademicHub 汇聚顶级期刊与预印本平台的实时文献。定制您的专属科研雷达,利用大语言模型自动生成交叉领域文献分析简报。

01.
arXiv (CS.LG) 2026-06-17

Reward hacking in physical reinforcement learning revealed by turbulent drag reduction

arXiv:2606.06227v2 Announce Type: replace-cross Abstract: A reinforcement-learning agent maximises its reward, which can diverge from the outcome its designer intended. In physical control the reward rarely closes that gap, and drag reduction in wall turbulence makes it concrete. A mass-conservation projection couples agents' outputs and erases the per-agent credit the policy gradient needs; a memoryless policy cannot resolve the slow near-wall cycle it acts on; and a pressure-gradient reward pays for nominal drag reduction by pumping power through the wall. Two degenerate controllers achieve large drag reductions while total dissipation rises, so the reported figure can mask a more wasteful flow. We trace each fault to its cause and fix it: a differentiable projection that restores credit, a recurrent policy with a widened sensing stencil, and a reward scored on the true wall power. The corrected controller acts on the flow within a closed energy budget, earning a conservative $17\%$ under honest accounting.

02.
arXiv (CS.CL) 2026-06-18

Compact Geometric Representations of Hierarchies

Computing geometric representations of data is a cornerstone of modern machine learning, typically achieved by training dual encoders which map queries and documents into a shared embedding space. Recent work of You et al. [NeurIPS '25] has extended this approach to hierarchical retrieval, where relevance is determined by the ancestor-descendant relationships in a Directed Acyclic Graph (DAG). While previous work has shown that valid embeddings exist when the number of descendants is small, these bounds degrade significantly for deep hierarchies, requiring dimensions as large as the total number of nodes. In this paper, we investigate compact reachability embeddings for more general graph classes and provide theoretical guarantees for representing hierarchies using embeddings whose dimension depends on structural graph parameters. We prove that for any directed tree, there exists a reachability embedding in constant dimension 3, independent of the tree's size or depth. We generalize this result to graphs characterized by treewidth $t$, constructing embeddings of dimension $O(t \log n)$, where $n$ is the number of nodes. Complementing these upper bounds, we provide matching or near-matching lower bounds, showing that dimension $\Omega(n)$ is necessary for general DAGs and $\Omega(t/\log(n/t))$ is required for graphs of treewidth $t$. We also obtain upper and lower bounds parameterized by the number of cross-edges in the DAG. We additionally show that our embeddings can be constructed on real world datasets, and that they give much smaller dimensions in high recall regimes compared to prior embeddings with theoretical guarantees.

03.
arXiv (CS.CV) 2026-06-11

MultiToP: Learning to Patch Visual Tokens to Mitigate Hallucinations in Video Large Multimodal Models

Video Large Multimodal Models have achieved remarkable progress in video understanding, yet they remain prone to hallucinations, where generated responses are not faithfully supported by the input video. In this paper, we propose MultiToP, a multimodal-context-aware visual token patching framework that mitigates hallucinations by refining unreliable visual tokens before language generation. MultiToP introduces a lightweight Visual Token Patcher to predict token-level replacement distributions and selectively substitute unreliable visual tokens with a dynamic global patch token. To train the patcher effectively, we further propose information-guided rank calibration, which uses answer-conditioned frame-level information cues derived from the backbone to guide token replacement. Combined with ground-truth answer supervision and sparsity regularization, MultiToP enables localized visual evidence refinement without modifying the original model. Extensive experiments demonstrate that MultiToP effectively reduces hallucinations on Vript-HAL with negligible inference overhead, improving the F1 scores of Qwen3-VL-4B-Instruct by 50.60% over the vanilla model. Meanwhile, MultiToP preserves general video understanding ability, yielding an 18.58% relative accuracy gain on ActivityNet-QA for Video-LLaVA-7B.

04.
arXiv (CS.AI) 2026-06-11

Automating Geometry-Intensive Compliance Checking in BIM: Graph-Based Semantic Reasoning Framework

arXiv:2606.12065v1 Announce Type: new Abstract: Automating compliance check for geometry-intensive regulations remains a significant technical bottleneck in Building Information Modeling (BIM), primarily due to the semantic disparity between high-level regulatory logic and structured IFC data. Existing methods, often reliant on static rule templates, struggle to traverse multi-hop reasoning chains or resolve latent spatial dependencies across multiple building entities. To address these challenges, a Spatial-Geometric Reasoning System for Building Information Modeling (SGR-BIM) is proposed as an integrative graph-driven reasoning framework. SGR-BIM dynamically constructs a cross-modal knowledge graph that aligns user intent, regulatory semantics, and BIM geometry, enabling interpretable reasoning without rigid hard-coding. Validated on 679 expert-verified queries from fire safety codes, the framework achieves 84.3% accuracy, representing an 8.6% improvement over enhanced-tool single-agent baselines. This research provides a graph-based semantic reasoning paradigm, enhancing the transparency and flexibility of automated geometric compliance check workflows in the Architecture, Engineering, and Construction (AEC) industry.

05.
PLOS Medicine 2026-06-04

Comparative impacts and cost-effectiveness of tuberculosis systematic screening strategies in prisons in Brazil, Colombia, and Peru: A mathematical modeling study

作者:

by Yiran E. Liu, José Victor Bortolotto Bampi, Ronan F. Arthur, Argita D. Salindri, Caroline Busatto, Pedro Avedillo Jiménez, Daniele Maria Pelissari, Fernanda Dockhorn Costa Johansen, Robert Arana-Narvaez, Alvaro Fernando Moreno Roca, Wilfredo Santos Solís Tupes, Esther Mori Jiu, Christian Alfredo Moreno Roca, Erika Albertina Abregú Contreras, Valentina Antonieta Alarcón Guizado, Julián Trujillo Trujillo, Belkys Marcelino, Mónica Alonso Gonzalez, Mayra Cecilia Córdova Ayllon, Ted Cohen, Moises A. Huaman, Jeremy D. Goldhaber-Fiebert, Julio Croda, Jason R. Andrews Background Incarceration is a leading driver of tuberculosis in Latin America. Systematic screening in prisons may reduce tuberculosis burden, but optimal strategies and cost-effectiveness remain uncertain. We examined the population-wide health impacts and cost-effectiveness of systematic screening in prisons in Brazil, Colombia, and Peru, comparing different timepoints, frequencies, and screening algorithms. Methods and findings Using dynamic transmission models calibrated to Brazil, Colombia, and Peru, we simulated annual or biannual (twice-yearly) prison-wide screening, alone or combined with entry and exit screening from 2026 to 2035. We evaluated four algorithms: (1) symptom screening, (2) chest X-ray with computer-aided detection (CXR-CAD), (3) symptoms and CXR-CAD (follow-up testing if either is positive), and (4) GeneXpert Ultra (Xpert) with pooled sputum. Individuals screening positive then received individual Xpert. We projected impacts on within-prison and population-level tuberculosis incidence in 2035, along with discounted costs (2023 US dollars) and disability-adjusted life years (DALYs). Model projections showed that combined entry, exit, and biannual screening with CXR-CAD was highly impactful and cost-effective across countries, reducing tuberculosis incidence by 61%–87% in prisons and 18%–28% population-wide. Compared to only biannual CXR-CAD (the next best strategy), the incremental cost per DALY averted of adding entry and exit screening was $2,984 (Brazil), $2,925 (Colombia), and $645 (Peru). Adding symptom screening to CXR-CAD marginally increased benefit and was only cost-effective in Peru’s higher-incidence prisons. Biannual screening alone remained cost-effective at prison incidence levels well below national averages, as well as at far lower willingness-to-pay thresholds. In settings without CXR-CAD, pooled Xpert was an impactful, cost-effective alternative. Key limitations include the model’s simplified representation of tuberculosis disease states and lack of stratification by age, gender/sex, HIV, or drug resistance. Conclusions These modeling results support immediate national-level adoption of prison-wide tuberculosis screening twice-yearly and at entry and exit, using CXR-CAD or pooled Xpert.

06.
arXiv (CS.CV) 2026-06-16

Divide-and-Denoise: A Game-Theoretic Method for Fairly Composing Diffusion Models

The abundance of pre-trained diffusion models provides an opportunity for composition. Combining several models, however, runs the risk of one model dominating or models disagreeing with each other. Here, we propose Divide-and-Denoise, a method for coordinating multiple pre-trained diffusion models during sampling. Much like managing a specialized workforce, our method creates a fair but efficient division of labor across models. Central to our method is the notion of an allocation which defines the responsibility of each model to every region of the noisy sample. At every timestep, we then denoise by (i) updating the allocation by solving a fair division game, where we divide the sample into regions that maximize total utility under fairness constraints, and (ii) aligning the models with this allocation, where we guide each model to denoise within its assigned region. This leads to a new composite denoising process that evolves in tandem with a division process. We evaluate Divide-and-Denoise on conditional image generation. Across several quality metrics, including the GenEval benchmark, our method outperforms baselines and resolves common failures including missing objects and mismatched attributes. Experiments show that Divide-and-Denoise utilizes each model's expertise without neglecting any other model.

07.
arXiv (CS.AI) 2026-06-16

Adaptive inference and function vectors in deep transformers

arXiv:2606.16694v1 Announce Type: cross Abstract: Transformers are widely used as a general-purpose substrate for learning complex correlations between a large collection of coupled variables, but their internal mechanisms have remained mysterious. We introduce a theory of a deep transformer as a mean-field interacting system that implements distributed inference, subject to constraints on communication, locality and depth. We show that such a system can exploit internal state representations ('function vectors') to infer a latent context variable at increasingly finer scales over its layers. In an in-context regression task, the theory predicts a non-trivial relationship between non-Gaussian, hierarchical structure in the latent context variable, and transformer depth. Predictions are tested using constrained linear attention transformers and demonstrate adaptive inference in deep architectures. Feedforward blocks and depth enable transformers to implement a much richer class of in-context learning algorithms than previously described.

09.
arXiv (quant-ph) 2026-06-17

Tensor network compression using fluid dynamics as a testbed: Analytical foundations in one dimension

arXiv:2606.17064v1 Announce Type: cross Abstract: High performance computers produce extreme-scale data sets that require sampling or compression if they are to be used to their full potential. Existing data compression techniques typically exploit features such as sparsity in the data, homogeneity in the data, or {\it a priori} knowledge of what subsets of data are of most interest. Fluid dynamics data in general do not exhibit these features and so are attractive test beds for generic compression techniques that are objective, robust, and tuneable with respect to information lost due to compression. Presented here is a method based on tensor networks, specifically matrix product states or tensor trains, that meets these requirements. The method is demonstrated for compression in one-dimension and is extensible to higher dimensionality. Lossless compression is demonstrated for random Fourier series for sufficiently high bond dimension of the tensor network, with the memory required to store the tensor network scaling directly proportional to the bond dimension. The lossy compression exhibited at lower bond dimension can be well within the relative error of many fluid simulations. The compression algorithm is tested for the time evolution of Burger's equation with excellent results. We additionally demonstrate the capability to perform computations in the compressed form through a tensor network periodic convolution that can be orders of magnitude faster than using fast Fourier transforms and the convolution theorem. In addition to being an attractive method for working with data sets generated by existing computers, the tensor network methods utilised are directly translatable to the emerging paradigm of quantum computing.

10.
arXiv (CS.CV) 2026-06-15

Fast Autoregressive Video Diffusion and World Models with Temporal Cache Compression and Sparse Attention

Autoregressive video diffusion models enable streaming generation, opening the door to long-form synthesis, video world models, and interactive neural game engines. However, their core attention layers become a major bottleneck at inference time: as generation progresses, the KV cache grows, causing both increasing latency and escalating GPU memory, which in turn restricts usable temporal context and harms long-range consistency. In this work, we study redundancy in autoregressive video diffusion and identify three persistent sources: near-duplicate cached keys across frames, slowly evolving (largely semantic) queries/keys that make many attention computations redundant, and cross-attention over long prompts where only a small subset of tokens matters per frame. Building on these observations, we propose a unified, training-free attention framework (FAST-AR) for FAST-AutoRegressive diffusion, consisting of three components: TempCache compresses the KV cache via temporal correspondence to bound cache growth; AnnCA accelerates cross-attention by selecting frame-relevant prompt tokens using fast approximate nearest neighbor (ANN) matching; and AnnSA sparsifies self-attention by restricting each query to semantically matched keys, also using a lightweight ANN. Together, these modules reduce attention, compute, and memory and are compatible with existing autoregressive diffusion backbones and world models. Experiments demonstrate up to x5 - x10 end-to-end speedups while preserving near-identical visual quality and, crucially, maintaining stable throughput and nearly constant peak GPU memory usage over long rollouts, where prior methods progressively slow down and suffer from increasing memory usage.

11.
arXiv (CS.CL) 2026-06-11

MemToolAgent: Leveraging Memory for Tool Using Agents Based on Environment and User Feedback

Modern large language model (LLM) agents can use external tools to help users solve complex tasks. However, for problems that require learning from long-term historical events or from previous agent-environment interactions, LLM agents are required to use memory mechanisms to store and retrieve experiences. While sophisticated memory systems exist for dialogue agents, few studies have empirically examined how to improve agents' tool-using capabilities through past user-agent conversations. We propose MemToolAgent, a framework that improves tool use through memory management. Our approach contains a memory extraction module that processes past experiences into structured memory entries, and a retrieval module that dynamically selects a subset of the stored memory entries. This enables more personalized and accurate responses aligned with user preferences and feedback without requiring LLM fine-tuning. In summary, this work has three main contributions: (1) a unified memory entry format that improves both general-purpose and personalized tool use without LLM fine-tuning, (2) a reflection-based memory extraction that uses environment and user feedback to distill wrong executions into critiques to store, and (3) a retrieval module that chooses how many past experiences to use based on the memory similarity distribution. MemToolAgent achieves 29%, 80%, and 17% relative improvements compared to strong baselines on the WorkBench, NESTFUL, and PEToolBench benchmarks, respectively.

12.
arXiv (CS.AI) 2026-06-17

FacProcessTwin: An LLM-Based System for Process Twin Development

arXiv:2606.17666v1 Announce Type: cross Abstract: Process twins provide real-time representations of entire production processes. By capturing how process steps interact, rather than monitoring a single machine in isolation as an asset-based digital twin does, they have the potential to drive efficiency gains across the whole process. However, developing a process twin is costly. It requires accurately modelling the entire production process: its process steps, the equipment and product-specific settings each step uses, and its process variations. The resulting model must then be bound to live operational data. We present FacProcessTwin, a system that leverages a large language model (LLM) to reduce this development time, building a process twin from a plant's process documentation and natural-language input from an operator. FacProcessTwin generates this complete process model and then automatically binds its process steps to live operational data. The generated model and its data bindings are rendered as an interactive process diagram through which manufacturing personnel can monitor and correct the system's autonomous decisions, such as resolving uncertainty at safety-critical binding steps. We evaluate FacProcessTwin through a real-world case study of an Australian food manufacturer, covering 16 production process flows that span chilled, frozen, and aseptic shelf-stable product categories and include process variations within the same product. The results show that FacProcessTwin generates these process models accurately (a mean F1 of 95.2% against ground truth) and builds each twin in roughly a sixth of the manual time. Its human-in-the-loop governance then keeps the safety-critical bindings correct: at ambiguous tags where a single-pass baseline silently mis-binds 75.0% of the time, FacProcessTwin defers to the operator and mis-binds none.

13.
Nature (Science) 2026-06-10

Efficient and accurate neural-field reconstruction using resistive memory

作者:

Applications such as medical imaging, augmented and virtual reality, and embodied artificial intelligence (AI) depend on the ability to reconstruct complex signals from sparse observations. These applications are characterized by incomplete measurements and limited computational resources. Traditional approaches to digital hardware face the following challenges: explicit signal representations require heavy sampling and storage, data movement across the von Neumann bottleneck dominates energy and latency, and CMOS (complementary metal–oxide–semiconductor)-based circuits offer limited parallel efficiency. Here we present a software–hardware co-optimization framework for sparse-input signal reconstruction. At the software level, we use neural fields1 to implicitly represent signals using neural networks, which are further compressed by low-rank decomposition and structured pruning. At the hardware level, we design a resistive-memory-based computing-in-memory platform, featuring a Gaussian encoder and a multi-layer perceptron processing engine. The Gaussian encoder leverages the intrinsic stochasticity of resistive memory for efficient encoding, whereas the processing engine enables precise weight mapping through a hardware-aware quantization circuit. On a 40-nm 256 Kb resistive-memory macro, the system delivers 23.5×, 21.0× and 32.3× gains in projected energy efficiency, together with 10.8×, 38.8× and 6.2× gains in projected parallelism, for three-dimensional computed tomography sparse reconstruction, novel view synthesis and dynamic-scene novel view synthesis, without compromising on reconstruction quality. This work advances AI-driven signal reconstruction technology and paves the way for future efficient and robust medical AI and three-dimensional vision applications. A co-optimized AI hardware–software system using resistive-memory computing improves energy efficiency and parallelism for sparse signal reconstruction in imaging and three-dimensional vision applications.

14.
arXiv (CS.CL) 2026-06-15

Indirect Computing Model with Indirect Formal Method

作者:

This paper,from the perspective of a collaborative intelligent computing system formed by combining human-computer interface and collaborative computing programs, discusses the principles of optimized cloud computing technology supported by the combination of an indirect computing model and an indirect formal method. On the basis of systematically reviewing the influence of previous theoretical achievements Turing's computability theory,Kleene's formal theory of small strings,von Neumann's digital computer architecture and Turing's hypothesis on AI judgment on the mainstream general-purpose digital computer paradigm,the author focuses on introducing an indirect computing model and an indirect formal theory compatible with both large and small strings. Using Chinese information data as an example,the design concept of a collaborative intelligent computing system prototype is presented. The significance is that this achievement facilitates optimization of cloud computing from data centers to knowledge centers.

15.
arXiv (CS.AI) 2026-06-16

Why Low-Precision Transformer Training Fails: An Analysis on Flash Attention

arXiv:2510.04212v4 Announce Type: replace-cross Abstract: The pursuit of computational efficiency has driven the adoption of low-precision formats for training transformer models. However, this progress is often hindered by notorious training instabilities. This paper provides the first mechanistic explanation for a long-standing and unresolved failure case where training with flash attention in low-precision settings leads to catastrophic loss explosion. Our in-depth analysis reveals that the failure is not a random artifact but caused by two intertwined phenomena: the emergence of similar low-rank representations within the attention mechanism and the compounding effect of biased rounding errors inherent in low-precision arithmetic. We demonstrate how these factors create a vicious cycle of error accumulation that corrupts weight updates, ultimately derailing the training dynamics. To validate our findings, we introduce a minimal modification to the flash attention that mitigates the bias in rounding errors. This simple change stabilizes the training process, confirming our analysis and offering a practical solution to this persistent problem. Code is available at https://github.com/ucker/why-low-precision-training-fails.

16.
arXiv (CS.AI) 2026-06-16

Dual-Granularity Orthogonal Disentanglement for Generalizable Audio Deepfake Detection

arXiv:2606.16532v1 Announce Type: cross Abstract: Audio deepfake detectors often fail to generalize across speakers, as they learn speaker-identity features rather than synthesis artifacts, known as implicit identity leakage. Existing methods address this but incur architectural complexity or training instability. This paper proposes a dual-granularity orthogonal disentanglement framework enforcing feature independence at two levels: sample-level cosine orthogonality captures directional decorrelation, while batch-level cross-covariance regularization eliminates linear correlations across embedding dimensions. A curriculum disentanglement schedule progressively strengthens the orthogonality constraint without auxiliary networks or adversarial dynamics. Experiments on ASVspoof 2019 LA, ASVspoof 2021 DF, and In-the-Wild datasets demonstrate that the proposed method achieves 1.35%, 7.88%, and 21.58% equal error rates (EER), respectively, surpassing gradient reversal disentanglement by 2.60% absolute on cross-dataset transfer.

17.
arXiv (CS.CL) 2026-06-16

Beyond Layer Importance in Layer-wise Sparsity: An Inter-Layer Perturbation-Absorption Perspective

The considerable layer-wise redundancy in large language models (LLMs) has established non-uniform sparsity allocation across layers as the standard pruning approach for efficient compression. Existing layer-wise allocation methods that estimate allocation strategy from local signals such as activation outliers or weight spectra mainly derive from local layer importance, whereas the final post-pruning performance is also influenced by the network's subsequent compensatory capacity. In this paper, we directly characterize this property through controlled perturbation experiments. We make the following empirical findings. First, layers exhibit highly heterogeneous responses to pruning-scale perturbations. In most cases, early layers amplify perturbations, while middle and late layers actively absorb them, with relative L2 drift decreasing monotonically across depth and direction realigning toward the unperturbed hidden-state trajectory. Second, absorption is a large-perturbation phenomenon. Under small perturbations the network exhibits amplification across all layers, and the transition to absorption occurs smoothly as perturbation magnitude grows to pruning scale. This enriches the linearized accumulation theory underlying related works. Building on these findings, we define an absorption coefficient per layer and propose absorption-aware correction, an orthogonal augmentation that improves OWL and AlphaPruning by reducing perplexity by 7.13% and boosting zero-shot accuracy by 1.02% across multiple model families at 70% sparsity.

18.
arXiv (CS.CV) 2026-06-19

3D-PLOT-LLM: Part-Level Object Tokens for 3D Large Language Models

3D multimodal large language models (3D MLLMs) describe a 3D object as a whole but cannot address, name, or reason about its parts. Prior part-aware attempts add segmentation decoders, heavier 3D encoders, or bounding-box grammars at substantial parameter cost. We take a fundamentally different path: we reorganize the input token stream so that parts become directly addressable through the LLM's own vocabulary. Our model, 3D-PLOT-LLM, partitions the frozen point encoder's patches into K locally coherent regions and inserts, before each region's patch tokens, a learnable per-region marker and a reserved vocabulary token ; a Marker-Space Refinement (MSR) module then conditions each marker on its region's spatial statistics and adjacency neighbors. The model thus cites parts in its output and follows prompts that refer to parts by token, a capability absent from prior object-level 3D MLLMs. To probe this interface, we construct PartVerse-QA, a vocabulary-level part-QA benchmark adapted from PartVerse mesh annotations (77K training pairs and 588 held-out queries on disjoint object splits), on which 3D-PLOT-LLM reaches caption-to-slots Jaccard 0.459 and Exact-match 13.78%, with a slot-to-caption GPT-4o judge of 44.68. On the 3DCoMPaT-GrIn part-aware grounded description benchmark, 3D-PLOT-LLM outperforms PointLLM, Kestrel, PARIS3D, and SegPoint on every text-output metric, and ShapeLLM on 3 of 4, with up to +3.03 GPT-4o judge over PointLLM. On Objaverse whole-object captioning, adding PartVerse-QA at Stage 2 yields +0.65 SBERT and +1.85 GPT-4o over PointLLM, and tops PointLLM-PiSA on 4 of 5 traditional metrics (SBERT, SimCSE, BLEU-1, METEOR) despite targeting a different (part-grounded) objective. All with under 1M new trainable parameters on a frozen point encoder, an order of magnitude below prior part-aware 3D MLLMs, and no segmentation decoder or bounding-box head.

19.
bioRxiv (Bioinfo) 2026-06-18

Trajectory inference of epithelial-centered neighborhood profiles reconstructs a pseudo-temporal continuum in idiopathic pulmonary fibrosis

Idiopathic pulmonary fibrosis (IPF) is characterized by complex lung architecture and spatially heterogeneous remodeling, which have hindered integrated analysis of cell-intrinsic activity and intercellular communication during disease progression. Here we profiled six IPF lung specimens comprising more than 630,000 cells using the Xenium 5k panel and developed an epithelial-centered neighborhood profiling framework based on the local cellular composition around each epithelial cell. This approach captured fibrosis-associated variation in epithelial niches without requiring predefined histological regions. Pseudo-temporal continuum inference of these profiles reconstructed a continuous axis that reflected the spatial progression of fibrotic remodeling from relatively preserved alveolar regions to fibrotic and airway-like remodeled regions. Within this spatial dataset, we mapped coordinated changes in epithelial states, local microenvironments, epithelial intracellular pathway activities, and directional interactions with neighboring cell types along the same axis. Our findings provide a spatial framework that generates testable hypotheses for progressive epithelial niche remodeling in IPF.

20.
arXiv (CS.CV) 2026-06-16

Propagating Structural Guidance: Synthesizing Fluorescein Angiography from Fundus Images and Sparse OCT Scans

Fundus fluorescein angiography (FFA) is critical for assessing retinal vascular abnormalities, but its acquisition is invasive and not always feasible. In contrast, color fundus photography (CFP) is non-invasive and widely accessible, which has motivated studies on CFP-to-FFA synthesis. However, prior works rely solely on CFP surface texture, fundamentally limiting the ability to reconstruct functional vascular information and subtle pathological changes. To address this, we propose a novel framework that synthesizes FFA from CFP with structural guidance provided by optical coherence tomography (OCT). We construct a multi-modal retinal imaging dataset with paired CFP, FFA, and OCT from 3,676 patient eyes–the first tri-modally aligned dataset in retinal imaging. To bridge the spatial gap between OCT and fundus modalities, we propose a Spatially Aligned Cross-Modal Fusion (SACMF) module that projects depth-resolved OCT features onto the fundus plane and injects them into the CFP encoder via adaptive layer normalization. Beyond feature fusion, we further introduce Token-wise Cross-Modality Alignment (TCMA), a token-level contrastive learning strategy that explicitly aligns CFP and FFA representations at corresponding spatial positions. Our method achieves superior synthesis performance compared to state-of-the-art methods. Moreover, extensive experiments demonstrate that the FFA images synthesized by our approach bring greater improvements in downstream disease diagnosis performance than existing methods, highlighting the clinical potential of our approach as a non-invasive decision-support tool in routine workflows. The code is available at https://github.com/while-plus/OCT-guide-FFA-Syn.

21.
arXiv (CS.LG) 2026-06-15

Which Directions Matter? Sparse Design for Affine Robust Optimization

arXiv:2606.14648v1 Announce Type: new Abstract: Robust machine learning and optimization rely on the uncertainty model choice. We investigate which uncertainty directions a model must cover when defined by a finite dictionary and a budget constraint. Selecting a subset forms an atomic uncertainty set with a closed form support function, yielding tractable robust programs for affine objectives. We propose a data driven selection rule based on a coverage objective over evaluation directions, including gradients, adversarial perturbations, or shifts observed on held out data. We prove this objective is monotone and submodular, supporting a greedy method with a $(1-1/e)$ approximation guarantee and a matching hardness barrier. We also provide a certificate bounding the loss from the selected subset and a radius calibration rule with out of sample control.

22.
arXiv (CS.AI) 2026-06-11

StatefulDiscovery: Evidence-Calibrated Claim Formation in Open-Ended Scientific Discovery

arXiv:2606.11851v1 Announce Type: new Abstract: Open-ended scientific discovery asks agents to move beyond executing analyses for predefined questions. Across multiple rounds of exploration, a discovery agent must decide which phenomena warrant investigation while avoiding overinterpretation, where emerging claims exceed the evidential scope of the analyses supporting them. This creates an evidence-calibration problem: the exploration trajectory must be coupled with claim status so that evidence can guide both what to investigate next and what can be claimed. We introduce StatefulDiscovery, a discovery framework that externalizes investigation state and uses it to coordinate frontier selection, evidence acquisition, and claim adjudication. We evaluate StatefulDiscovery across 40 real-data discovery tasks. Compared with several baselines, StatefulDiscovery produces more claims overall judged to be both well-supported and high-value. Ablations indicate that structured hypotheses, local adjudication, and frontier control contribute to performance. Together, these results suggest that explicit discovery state can couple exploration with evidence-calibrated claim formation.

23.
bioRxiv (Bioinfo) 2026-06-11

STITCH links cellular morphology and gene expression in spatial transcriptomics

In situ spatial (ISS) sequencing can uncover co-variation between cellular morphology and gene expression in vivo. However, a principled and interpretable mathematical representation of morphology has not yet been applied in this context. In particular, current deep learning-based representations of cell images confound a cell's shape with its size. We present an interpretable representation of cellular boundary contours, based on tangent principal component analysis (TPCA) in a Kendall shape manifold, that captures size-independent contour shape features. This approach successfully recovers shape-perturbing genes in an RNAi screen than a previous metric geometry-based approach. We build on TPCA to develop STITCH (Shape-TranscriptomIc Correlation and Harmonization), an approach to reveal covariation between cell morphology with gene expression in ISS datasets. In a Xenium dataset, STITCH outperforms a deep learning-based approach in both recovering the layered organization of keratinocytes and a spatial gradient in nuclear eccentricity. Across samples in a melanoma CosMx dataset, STITCH reproducibly associates elongated and triangular fibroblasts with proximity to malignant cells and myofibroblast-like transcriptional program. Finally, STITCH independently recovers a known link between mesenchymal-like malignant cell states and increased cell area in two melanoma cohorts. STITCH can thus yield interpretable morphology-transcriptome relationships across cell types, patients, and spatial transcriptomics platforms.

24.
medRxiv (Medicine) 2026-06-18

Automated Airways Characterization and Assessment of Cystic Fibrosis from CT Imaging

Background Advancements in medical imaging have enabled non-invasive diagnosis and staging of cystic fibrosis (CF) using CT scans, revealing dilated airways, an increased number of visible airways, and airway generation splits in these patients. However, manual characterization of airways remains time-consuming and challenging due to the numerous structural changes, thereby limiting clinical feasibility. This study aims to develop an automated algorithm to characterize airways from segmented lung CT scans and apply this to a retrospective population. This approach reduces the time required to analyze images and obtain disease-staging results. Methods This framework consists of two stages. The first stage extracts and skeletonizes the airway tree from lung CTs, while the second stage measures lung features, including airway volumes, branch counts, generation splits, diameters, and cross-sectional areas. This permits comprehensive characterization for use in clinical assessment. Results The airways analysis was performed on 169 CT volumes ranging in age from 6 to 18 years of age, revealing substantial differences in detected airway branches, generation splits, and normalized airway volume between the control and CF groups. The framework also measures airway diameters and cross-sectional areas, revealing an increase in the number of small airways in cystic fibrosis patients, due to early bronchiectasis. These findings align with previous research and demonstrate the framework's ability to accurately quantify airway changes in patients with CF. Discussion The framework extracts entire airway trees, facilitating measurements of volume, branch count, diameters, and cross-sectional areas, which change with CF severity and/or treatment. However, partial lung atelectasis can limit the accuracy of airway detection in moderate-to-severe cases. Funding NIA U54 AG054345 and NIA R21 AG07857501

25.
arXiv (math.PR) 2026-06-18

A Unified Approach to Beta Moments, Combinatorial Identities, and Random Walks

arXiv:2605.05420v2 Announce Type: replace Abstract: The study of random walks has increasingly been popular across diverse disciplines such as statistics, mathematics, quantum physics, where they are used to model paths consisting of successive random steps in a mathematical space. A fundamental quantity of interest is the probability that a simple symmetric random walk returns to the origin after 2n steps. In this paper, we develop a unified probabilistic approach that connects the return probabilities in arbitrary dimensions with moment representations. Using this framework, we provide probabilistic proofs of several combinatorial identities involving beta and gamma functions, and derive new combinatorial identities in general dimensions.