Academic Intelligence · Curated Daily

探索全球前沿学术脉络

AcademicHub 汇聚顶级期刊与预印本平台的实时文献。定制您的专属科研雷达,利用大语言模型自动生成交叉领域文献分析简报。

01.
arXiv (CS.AI) 2026-06-17

CogGen: Cognitive-Load-Inspired Fully Unsupervised Deep Generative Modeling for Compressively Sampled MRI Reconstruction

arXiv:2603.04438v3 Announce Type: replace-cross Abstract: Fully unsupervised deep generative modeling (FU-DGM) offers significant potential for compressively sampled magnetic resonance imaging (CS-MRI) reconstruction. Representative FU-DGM formulations, such as deep image prior (DIP) and implicit neural representation (INR), employ architectural bias to induce a low-dimensional manifold in the image space that aligns with the forward observation. However, as the underlying inverse system is highly ill-posed, prolonged iterative fitting in FU-DGM typically leads to poor efficiency and noise amplification. In this paper, guided by the cognitive principle of easy-to-hard learning, we propose CogGen, an FU-DGM framework that reformulates CS-MRI reconstruction as a staged inversion problem. Specifically, CogGen implements an self-paced curriculum learning (SPCL)-driven progressive scheduling strategy through an MRI-aware dual-threshold weighting criterion, which adaptively regulates k-space measurement participation. The data-consistency residual thresholding evaluates the fitting reliability of the current generator, while the k-space radius thresholding controls stage-wise measurement exposure, thereby avoiding uniform fitting throughout optimization. Theoretically, our analysis shows that, when early stages favor easy-to-fit measurements, CogGen yields a reduced local sufficient-iteration bound and a smaller cumulative noise-amplification bound, explaining the improved convergence behavior and reconstruction fidelity of CogGen within a finite iteration budget. Numerical experiments demonstrate that both CogGen instantiations, CogGen-DIP and CogGen-INR, achieve superior performance over prevailing CS-MRI reconstruction techniques, including unsupervised and supervised pipelines.

02.
arXiv (CS.LG) 2026-06-15

On Rate-Optimal Partitioning Classification from Observable and from Privatised Data

arXiv:2312.14889v4 Announce Type: replace-cross Abstract: In this paper we revisit the classical method of partitioning classification and prove novel convergence rates under relaxed conditions, both for observable (non-privatised) and for privatised data. We consider the problem of classification in a $d$ dimensional Euclidean space. Previous results on the partitioning classifier worked with the strong density assumption (SDA), which is restrictive, as we demonstrate through simple examples. Here, we study the problem under much milder assumptions. We presuppose that the distribution of the inputs is a mixture of an absolutely continuous and a discrete distribution, such that the absolutely continuous component is concentrated on a $d_a$ dimensional subspace. In addition to the standard Lipschitz and margin conditions, a novel characteristic of the absolutely continuous component is introduced, by which the convergence rate of the classification error probability is computed, both for the binary and for the multi-class cases. This bound can reach the minimax optimal convergence rate achievable using SDA, but under much milder distributional assumptions. Interestingly, this convergence rate depends only on the intrinsic dimension of the continuous inputs, $d_a$, and not on $d$. Under privacy constraints, the data cannot be directly observed, and the constructed classifiers are functions of the randomised outcome of a suitable local differential privacy mechanism. In this paper we add Laplace distributed noises to the discretisations of all possible locations of the feature vector and to its label. Again, tight upper bounds on the convergence rate of the classification error probability can be derived, without using SDA, such that this rate depends on $2d_a$.

03.
arXiv (CS.AI) 2026-06-19

See-and-Reach: Precise Vision-Language Navigation for UAVs within the Field of View

arXiv:2606.20045v1 Announce Type: cross Abstract: UAV Vision-Language Navigation (UAV-VLN) is typically formulated as a holistic search-and-reach problem, where long-range target discovery and final target approach are optimized and evaluated jointly. This formulation makes it difficult to assess a critical capability of aerial embodied agents, namely whether a UAV can accurately ground a visible target and translate vision-language evidence into precise 3D motion once the target enters its field of view. To address this limitation, we introduce UAV-VLN-FOV, a target-visible navigation task that isolates the see-and-reach stage and enables a more diagnostic evaluation of terminal reaching ability. We further propose 3DG-VLN, a vision-language waypoint prediction framework guided by dynamic 3D direction cues to enhance fine-grained visual grounding and spatial direction alignment for precise target reaching. Specifically, 3DG-VLN adaptively processes high-resolution front-view and downward-view observations to preserve fine-grained visual and geometric details for target grounding. It also updates the target-relative direction online during closed-loop navigation, allowing the agent to maintain spatial alignment with the target and reduce accumulated direction drift. To support this task, we construct a dedicated high-resolution benchmark which contains 2,717 trajectories with target-oriented high-level instructions, high-resolution front-view and downward-view egocentric observations, and continuous 3D waypoint annotations. Experiments show that 3DG-VLN outperforms competitive UAV-VLN baselines, achieving a 13.82\% improvement in success rate. Real-world trials further demonstrate the potential of 3DG-VLN for practical see-and-reach navigation. The source code and benchmark are available at https://github.com/xuefanfu/3DG-VLN.

04.
arXiv (CS.CV) 2026-06-17

Plug-and-Adapt: Multimodal Coreference Resolution at First Sight with a Pretrained Alignment Model

Visual information helps resolve ambiguity in coreference resolution, leading to notable performance gains. However, existing Multi-modal Coreference Resolution (MCR) methods require training with (partially) annotated data from the target dataset before they can be applied, preventing their direct usability and raising concerns about generalization. While Vision-Language Large Models (VLLMs) with billions of parameters offer promising zero-shot capabilities, they remain largely inaccessible. Their massive size limits deployability, and many are only accessible through paid APIs. In this paper, we propose a plug-and-adapt method that strategically adapts a carefully pre-trained alignment model for immediate use in MCR tasks, designed to eliminate the need for training on scarce benchmark datasets or relying on resource-intensive VLLMs. Specifically, we first pre-train a fine-grained alignment model between textual and visual contextual information using vision-language alignment datasets. We then repurpose the alignment model to MCR through similarity aggregation by fusing visual and categorical cues with evidence theory, thereby enhancing effectiveness. Experiments on the Coreference Image Narratives (CIN) benchmark dataset demonstrate the effectiveness of our method, achieving a 5.31\% and 2.12\% improvement in CoNLL F1 over SOTA dedicated methods and popular VLLMs, respectively. We further evaluate our method on a masked CIN dataset for robustness testing and on a specially constructed VCR-MCR dataset for generalization assessment, with results confirming both capabilities.

05.
arXiv (CS.LG) 2026-06-12

LLM-ODDR: A Large Language Model Framework for Joint Order Dispatching and Driver Repositioning

arXiv:2505.22695v2 Announce Type: replace Abstract: Ride-hailing platforms face significant challenges in optimizing order dispatching and driver repositioning operations in dynamic urban environments. Traditional approaches based on combinatorial optimization, rule-based heuristics, and reinforcement learning often overlook driver income fairness, interpretability, and adaptability to real-world dynamics. To address these gaps, we propose LLM-ODDR, a novel framework leveraging Large Language Models (LLMs) for joint Order Dispatching and Driver Repositioning (ODDR) in ride-hailing services. LLM-ODDR framework comprises three key components: (1) Multi-objective-guided Order Value Refinement, which evaluates orders by considering multiple objectives to determine their overall value; (2) Fairness-aware Order Dispatching, which balances platform revenue with driver income fairness; and (3) Spatiotemporal Demand-Aware Driver Repositioning, which optimizes idle vehicle placement based on historical patterns and projected supply. We also develop JointDR-GPT, a fine-tuned model optimized for ODDR tasks with domain knowledge. Extensive experiments on real-world datasets from Manhattan taxi operations demonstrate that our framework significantly outperforms traditional methods in terms of effectiveness, adaptability to anomalous conditions, and decision interpretability. To our knowledge, this is the first exploration of LLMs as decision-making agents in ride-hailing ODDR tasks, establishing foundational insights for integrating advanced language models within intelligent transportation systems. While the current framework incurs higher computational costs than traditional methods, we show that parallel decomposition and model distillation can reduce latency to production-viable levels for deployment.

06.
arXiv (CS.LG) 2026-06-15

LapidaryEngine: Fully Conversational Crystal Generation

arXiv:2606.14215v1 Announce Type: new Abstract: The emergence of Large Language Models (LLMs) has inspired the vision of generating bespoke crystal materials directly from natural-language instructions, enabling users to design materials through intuitive, conversational interaction. Existing text-to-crystal generative models represent important early steps toward this goal, but they suffer from two critical limitations: (i) restricted input formats that require highly structured descriptions (e.g., chemical formulas), and (ii) one-directional generation, where models can map text to crystal but cannot perform the inverse. These limitations prevent fully conversational workflows and hinder alignment with users' inherently ambiguous and evolving desiderata. We address these challenges with LapidaryEngine, the first model to support fully conversational crystal generation. LapidaryEngine accepts free-form natural-language requests and performs iterative refinement and editing in a dialogue-like manner. The key innovation is a pivot representation, a third, intermediate form that enables bidirectional translation between text and crystal structures despite the absence of direct paired datasets. Leveraging this pivot allows robust interpretation of user feedback and precise structural control. We demonstrate LapidaryEngine across diverse tasks, including insulator discovery, stability optimization, compositional modification, and structural editing, showcasing its ability to align generated materials with user intent in an interactive manner.

07.
arXiv (CS.AI) 2026-06-16

Imperfect Visual Verification for Code Edition : A Case Study on TikZ

arXiv:2606.15693v1 Announce Type: cross Abstract: LLMs have significantly advanced code generation, enabling the synthesis of functional programs. While recent systems achieve strong performance on many coding benchmarks, tasks involving programs such as TikZ that generate visual artifacts remain challenging, in particular on visual code customization. Unlike generation from scratch, customization requires localized, semantics-preserving edits: the model must locate relevant code, modify it according to the instruction, and preserve the remaining structure and rendering. Approaches based on post-hoc iterative refinement/correction where a verifier provides feedback to guide corrections, have shown promise. However, in the case of programs with a visual outcome such as in TikZ, where correctness is harder or likely impossible to formalize and evaluate automatically, deterministic verifiers do not exist. Hence, developers can only rely on imperfect verifiers. In this paper, we conduct an empirical study to answer:to what extent can iterative refinement remain effective when the verifier itself is unreliable?} We use TikZ as a focused case study that isolates the core difficulties of the problem (weak code structure, fine-grained visual semantics, and difficult feature localization) in a controlled and challenging setting. We define visual code customization as an iterative editing problem with an imperfect oracle, and introduce a framework for analyzing such iterative refinements. We conduct a large-scale study and evaluate multiple LLM-based and tool-augmented visual verifiers within iterative refinement pipelines, and perform extensive manual annotation of refinement trajectories to assess verifier behavior and feedback quality. Our findings show that even imperfect verifiers can determine with moderate accuracy whether visual instructions are applied to code, achieving F1-scores up to 0.815. Feedback improves iterative refinement, especially for weaker models, adding 11–20 perfect customizations for Qwen3-vl-30b-a3b-Instruct, while stronger models like Gemini-3 gain fewer improvements (+5) but benefit more from accurate verification that prevents premature acceptance. Feedback is effective only when it precisely identifies image issues, provides actionable guidance, addresses all relevant problems, and remains grounded in the original instruction.

08.
arXiv (CS.CL) 2026-06-18

PreUnlearn: Auditing Collateral Knowledge Damage Before Large Language Model Unlearning

Machine unlearning for large language models (LLMs) aims to remove specified knowledge while preserving the rest of the model's capabilities. However, the boundary between knowledge to forget and knowledge to retain is often unclear, since related and even distant information may be entangled in the model. In this paper, we study LLM unlearning from a data-centric perspective and measure how unlearning effects propagate from the forget set to same-domain and distant-domain knowledge. We find a consistent decay pattern: collateral damage is strongest near the forget set, weakens with semantic distance, but does not disappear at domain boundaries. We further ask whether such damage can be audited before unlearning is executed. We formulate forget-set auditing as a pre-unlearning prediction task and analyze which data features are most predictive of downstream damage. Our results show that interaction features between the forget set and evaluation set provide the strongest signals, suggesting that collateral damage is partly reflected in data geometry before model updates occur. These findings position forget-set auditing as an early warning tool for identifying risky unlearning runs and designing more reliable unlearning procedures.

09.
arXiv (CS.LG) 2026-06-16

SSNAPS: Audio-Visual Separation of Speech and Background Noise with Diffusion Inverse Sampling

arXiv:2602.01394v2 Announce Type: replace-cross Abstract: This paper addresses the challenge of audio-visual single-microphone speech separation and enhancement in the presence of real-world environmental noise. Our approach is based on generative inverse sampling, where we model clean speech and ambient noise with dedicated diffusion priors and jointly leverage them to recover all underlying sources. To achieve this, reformulate a recent inverse sampler to match our setting. We evaluate on mixtures of 1, 2, and 3 speakers with noise and show that, despite being entirely unsupervised, our method consistently outperforms leading supervised baselines in WER across all conditions. We further extend our framework to handle off-screen speaker separation. Moreover, the high fidelity of the separated noise component makes it suitable for downstream detection of the acoustic scene. Code and pretrained models will become available upon acceptance. Demo page: https://ssnaps2026.github.io/ssnaps2026/

10.
arXiv (CS.CV) 2026-06-18

DINO-Med3D: Bridging Dimension and Domain Gaps in Volumetric Segmentation via Progressive Adaptation

Although DINOv3 has demonstrated remarkable semantic discrimination in natural imagery, its direct application to volumetric medical segmentation is hindered by inherent dimension and domain disparities. To resolve these issues, we propose DINO-Med3D, a two-stage progressive framework that repurpose the pre-trained DINOv3 encoder for 3D medical tasks. In the first stage, we mitigate the dimension gap by introducing a multi-slice embedding module that incorporates pseudo-3D context, while simultaneously employing a segmentation proxy task to adapt representations learned from natural scenes to the medical domain. Subsequently, we further enhance volumetric understanding by adding lightweight 3D adapters into the frozen backbone to enforce global inter-slice continuity. Finally, to compensate for the spatial information loss inherent in the embedding process, we design a parallel detail recovery stream to explicitly preserve high-frequency boundary cues. Extensive experiments on five public datasets demonstrate that our approach successfully adapts DINOv3 to the medical domain and significantly outperforms state-of-the-art baselines.

11.
arXiv (quant-ph) 2026-06-11

Measurement-Free Toric-Code Memory in Array Globally Controlled Rydberg Array

arXiv:2606.12030v1 Announce Type: new Abstract: The central prerequisite of any fault-tolerant quantum architecture is a quantum memory: a block of encoded physical qubits whose logical state is actively preserved against noise across many rounds of error correction. In neutral-atom Rydberg arrays, realizing such a memory is obstructed not by the entangling gates themselves, which are already fast and high-fidelity, but by the auxiliary operations that a conventional error-correction cycle requires: mid-circuit fluorescence measurement, inter-zone atom transport, and locally focused single-qubit addressing. Each of these introduces latency, atom loss, or optical crosstalk that exceeds the cost of the underlying gates by orders of magnitude. These costs accumulate cycle after cycle, progressively degrading the very logical information the code is meant to protect. Here we propose a protocol that stabilizes a toric-code quantum memory without moving, measuring or local addressing atoms. The key is to use a three-species Rydberg atom array for the complete stabilizer cycle, including syndrome extraction, coherent correction, and ancilla reset, under global, species-selective laser pulses. Numerical simulation of a $4 \times 4$ rotated toric code shows a longer qubit lifetime when the physical error rate is below a pseudo-threshold $p^\star \approx 0.034$. The scheme offers a concrete, hardware-efficient route to topological quantum memory in neutral-atom platforms.

12.
arXiv (CS.CL) 2026-06-17

Adaptive Activation Steering for Efficient LLM Reasoning via Closed-Loop PID Control

Reasoning LLMs trained with long chain-of-thought often overthink: they spend tokens on redundant reflection and transitions that inflate cost without improving accuracy. Static activation steering (e.g.\ SEAL) suppresses such content with a fixed vector, but applies the same strength regardless of how redundant the current chunk actually is. We describe PID-steering, a training-free, decoding-time method that modulates the steering strength with a PID controller driven by a lightweight chunk-level redundancy classifier. On a subset of GSM8K with DeepSeek-R1-Distill-Qwen-1.5B, the method improves accuracy from 85.7\% to 89.6\% (+3.9 pp) while cutting average output length from 1026 to 790 tokens ($-$23\%). We report it as a small-scale proof of concept rather than a benchmark result.

13.
arXiv (CS.CL) 2026-06-11

SoftMatcha 2: A Fast and Soft Pattern Matcher for Trillion-Scale Corpora

We present SoftMatcha 2, an ultra-fast and flexible search algorithm that enables search over trillion-scale natural language corpora in under 0.3 seconds while allowing semantic variations in the form of substitution, insertion, and deletion. Our approach employs string matching based on suffix arrays that scales well with corpus size, and represents words as vectors, which underpin its semantic flexibility. To mitigate the combinatorial explosion induced by the semantic relaxation of queries, our method is built on two key algorithmic ideas: dynamic corpus-aware pruning and fast exact lookup enabled by a disk-aware design. We theoretically analyze the efficiency of the proposed method, indicating that it can mitigate exponential growth in the search space. Empirically, on FineWeb-Edu (Lozhkov et al., 2024) (1.4T tokens), it attains substantially lower search latency than existing methods: infini-gram (Liu et al., 2024), infini-gram mini (Xu et al., 2025), and SoftMatcha (Deguchi et al., 2025). As a practical application, our method uncovers benchmark contamination in training corpora that existing approaches miss, and it also benefits information retrieval and paraphrase detection. We also provide an online demo of fast, soft search across corpora in seven languages.

14.
Nature (Science) 2026-06-09

A unicellular relative links aggregative multicellularity to animal origins

作者:

How animals evolved complex multicellularity from their unicellular ancestors remains unanswered. Unicellular relatives of animals exhibit simple multicellularity through clonal division, formation of multinucleate coenocytes, or aggregation. 1 Therefore, animal multicellularity may have evolved from one (or a combination) of these behaviours. Aggregation has classically been dismissed as a means to complex multicellularity. 2 However, aggregation occurs in many extant animal cells and has also been recently described in three close unicellular relatives of animals (the choanoflagellates Salpingoeca rosetta and Choanoeca flexa, and the filasterean Capsaspora owczarzaki). 3-5 It is unclear whether aggregation in these species is derived or ancestral, and its relevance for animal origins remains unknown. To fill this gap, we investigated whether an additional close unicellular relative of animals can undergo aggregation. We discovered that the marine free-living bacterivorous filasterean Ministeria vibrans 6 forms homogeneous aggregates with reproducible kinetics that have long-term stability, and that improved feeding and mating may be evolutionary drivers of this aggregation. Notably, we found that homologs of many animal multicellularity genes involved in cell adhesion, signalling, and transcriptional regulation were deployed during the aggregation process, indicating that they may have been used for aggregation in the unicellular ancestors of animals before being co-opted into animal multicellular development. Thus, our results imply that aggregative multicellularity was key to the development of the multicellular animal genetic toolkit.

15.
arXiv (CS.LG) 2026-06-11

Provable Recovery of Locally Important Signed Features and Interactions from Random Forest

arXiv:2512.11081v2 Announce Type: replace-cross Abstract: Feature and Interaction Importance (FII) methods are essential in supervised learning for assessing the relevance of input variables and their interactions in complex prediction models. In many domains, such as personalized medicine, local interpretations for individual predictions are often required, rather than global scores summarizing overall feature importance. Random Forests (RFs) are widely used in these settings, and existing interpretability methods typically exploit tree structures and split statistics to provide model-specific insights. However, theoretical understanding of local FII methods for RF remains limited, making it unclear how to interpret high importance scores for individual predictions. We propose a novel, local, model-specific FII method that identifies frequent co-occurrences of features along decision paths, combining global patterns with those observed on paths specific to a given test point. We prove that our method consistently recovers the true local signal features and their interactions under a Locally Spike Sparse (LSS) model and also identifies whether large or small feature values drive a prediction. We illustrate the usefulness of our method and theoretical results through simulation studies and a real-world data example.

16.
arXiv (CS.CV) 2026-06-16

MatchLM2Lite: A Scalable MLLM-to-Lite Framework for Reproduced Content Identification

Content moderation is critical for online video platforms to ensure content safety, protect creators, and sustain positive user experiences. Beyond filtering harmful content, platforms must guarantee content authenticity at scale so that users are exposed to diverse, original videos rather than low-value reproductions. We present MatchLM2Lite, a real-time, production-grade reproduced content identification (RCI) system that leverages the powerful understanding of a multimodal large language model (MLLM) distilled into a small and fast-inference model. Our system jointly models video, audio, and text signals, operating on pairs of videos to produce fine-grained reproduction scores. The system comprises two modules, MatchLM and MatchLite, and a two-stage training recipe. First, our high-capacity MLLM, MatchLM, serves as a teacher model to define the upper bound of RCI performance. Its capabilities are then distilled into a compact student model, MatchLite. This design allows MatchLite to deliver low-latency, high-throughput inference on video pairs while preserving much of MatchLM's accuracy, making it suitable for integration into real-time recommendation systems. MatchLM achieves an F1-score improvement of +8.57 compared to our previous production model. After knowledge distillation, MatchLite retains a +6.55 gain in F1-score while reducing computational cost by 35x. Deployed at scale, MatchLM2Lite enables efficient, pairwise multimodal RCI, stably serving online traffic at high queries per second (QPS) with an end-to-end latency below 30 seconds. This system has reduced the reproduced video view rate on our platform by 2.5% without degrading user engagement, demonstrating its effectiveness in a large-scale production environment.

17.
arXiv (CS.CV) 2026-06-19

RC-GeoCP: Geometric Consensus for Radar-Camera Collaborative Perception

Collaborative perception (CP) enhances scene understanding through multi-agent information sharing. While LiDAR-centric systems offer precise geometry, high costs and performance degradation in adverse weather necessitate multi-modal alternatives. Despite dense visual semantics and robust spatial measurements, the synergy between cameras and 4D radar remains underexplored in collaborative settings. This work introduces RC-GeoCP, the first framework to explore the fusion of 4D radar and images in CP. To resolve misalignment caused by depth ambiguity and spatial dispersion across agents, RC-GeoCP establishes a radar-anchored geometric consensus. Specifically, Geometric Structure Rectification (GSR) aligns visual semantics with geometry derived from radar to generate spatially grounded, geometry-consistent representations. Uncertainty-Aware Communication (UAC) formulates selective transmission as a conditional entropy reduction process to prioritize informative features based on inter-agent disagreement. Finally, the Consensus-Driven Assembler (CDA) aggregates multi-agent information via shared geometric anchors to form a globally coherent representation. We establish the first unified radar-camera CP benchmark on V2X-Radar and V2X-R, demonstrating state-of-the-art performance with significantly reduced communication overhead. Code will be released soon.

18.
arXiv (CS.LG) 2026-06-16

Filtered Conformal Ellipsoids for Graph-Native Time Series

arXiv:2606.17014v1 Announce Type: new Abstract: Joint prediction sets for multivariate time series should control a single event while adapting to cross-coordinate dependence. We study filtered conformal ellipsoids: a frozen state-space filter emits a one-step predictive mean and covariance, and split-conformal calibration is applied to the resulting Mahalanobis scores. The filter is used to choose the ellipsoid shape; conformal calibration chooses the scalar radius, so the construction benefits from a learned predictive covariance without relying on Gaussian tail probabilities for coverage. The main difficulty is that filtered scores are dependent and learned recurrent filters need not contract in their raw hidden state; we therefore analyse contraction in an observable predictive-law quotient that identifies hidden states producing the same future sequence of emitted Gaussian laws. Under a stable Bayes Gaussian-projection filter, covariance bounds, and a finite-horizon observability Fisher condition, small excess Gaussian negative log-likelihood implies contraction of the learned emitted laws. Combined with a threshold-autocovariance envelope this yields a Chebyshev-type approximate coverage bound for filtered split-conformal prediction under dependence; a sharper Bernstein-type bound requires an additional geometric-mixing concentration assumption. Under Gaussian oracle realisability we also obtain a near-oracle log-volume comparison within the class of conditionally valid Gaussian ellipsoid rules. We instantiate the framework with a GCN-GRU filter with diagonal-plus-low-rank covariance. On moderate-size graph-native traffic benchmarks (METRLA-$20$ and PEMSBAY-$50$), the learned filter gives sharper at-target ellipsoids than static-covariance and non-filter baselines; at full-graph scale and on non-graph-native datasets, factor and copula baselines can be stronger.

19.
arXiv (CS.LG) 2026-06-16

Hidden Degradation Costs in Energy-Cost-Only HEMS Optimisation: Study on Battery and PV Sensitivity

arXiv:2606.16051v1 Announce Type: cross Abstract: Residential battery energy storage systems (BESS) are increasingly deployed alongside photovoltaic (PV) generation to reduce household energy costs under volatile time-of-use (TOU) tariffs. Model predictive control (MPC) is a widely adopted optimisation strategy for home energy management systems (HEMS), typically formulated to minimise net energy cost, subject to physical and operational constraints. However, battery degradation is rarely embedded in the optimisation objective, meaning its cost is unquantified and aggressive; high-cycle-count strategies could incur significant losses once deployed to physical systems. This paper presents a receding-horizon mixed-integer linear programming (MILP) baseline for a UK residential HEMS, using demand data from the REFIT dataset. A 3 by 3 sensitivity study is conducted across three battery sizes and three PV array sizes, with post-hoc degradation cost estimated using the Naumann stress model and rainflow cycle counting. Results show that degradation remains constant for each battery size and can exceed energy cost savings by up to 1,060 %. These results demonstrate that energy-cost-only optimisation systematically underestimates the true system cost, motivating a degradation-aware control formulation.

20.
arXiv (CS.CL) 2026-06-12

A Survey on Long-Term Memory Security in LLM Agents: Attacks, Defenses, and Governance Across the Memory Lifecycle

The emergence of writable, cross-session persistent memory in LLM agents introduces a qualitatively different threat landscape from conventional input-centric security concerns, characterized by three properties: persistence, statefulness, and propagation. To systematically characterize this landscape, we propose a Memory Lifecycle Framework that organizes attacks, defenses, and their cross-phase dependencies along two axes: six lifecycle phases (Write, Store, Retrieve, Execute, Share & Propagate, Forget & Rollback) and four security objectives (Integrity, Confidentiality, Availability, Governance). This analysis in turn exposes the need for formal security guarantees at the system level, motivating Verifiable Memory Governance(VMG), a framework of five architectural primitives that specifies what verifiable mechanisms a long-term-memory system must provide to maintain auditable, recoverable control over its memory state. Our analysis indicates that robust Long-Term Memory (LTM) security cannot be retrofitted at retrieval or execution time alone, but must be anchored in storage-time provenance, versioning, and policy-aware retention from the outset.

21.
Nature (Science) 2026-06-10

Deep learning four decades of human migration

Human migration is a fundamental driver of global demographic change, shaping population structure, labour markets and social policy across countries1–3. Although long-term migration patterns are often linked to economic development4, they can shift rapidly in response to shocks such as conflict, environmental crises and political change5. Despite its importance, migration remains difficult to measure consistently: existing data are sparse, concentrated in high-income settings and are fragmented across incompatible definitions, temporal resolutions and data types6–8. Past efforts have relied on partial datasets, including flow records, stock estimates and model-based reconstructions with limited coverage9–14. A central challenge is therefore to construct a globally consistent, high-resolution account of migration flows over time. Here we present a new dataset of annual origin-destination migration across 230 countries and regions from 1990 to the present, integrating diverse data sources into a unified modelling framework. By combining official statistics, census-based stocks, net migration estimates and past flow reconstructions, our approach produces temporally detailed and spatially comprehensive estimates that substantially extend existing resources. Using an ensemble of deep recurrent neural networks informed by geographic, economic, cultural and political covariates, we capture both persistent trends and short-term responses to changing conditions—all while propagating uncertainty to generate confidence bounds. Our results outperform existing five-year flow estimates on held-out data and provide finer temporal resolution, revealing previously obscured dynamics in global migration patterns. This framework highlights regions in which uncertainty remains high and data collection is most urgently needed. By releasing all data, code and trained models, we provide a transparent and reproducible foundation for future work. These advances enable a more timely and detailed understanding of human mobility, with implications for research and policy in an increasingly dynamic global system. A global annual migration-flow dataset (1990–2024) is produced using deep-learning models and diverse sources to estimate movements across 230 countries with improved temporal resolution, coverage and uncertainty estimates.

22.
arXiv (CS.CV) 2026-06-16

Latent Space Reinforcement Learning for Inverse Material Estimation in Food Fracture Simulation

Realistic visual simulation of food manipulation requires accurate material parameters, yet these are difficult to measure directly and vary across the heterogeneous regions of a single food item. We address the inverse problem of estimating material parameters from a target description of fracture behavior in a non-differentiable continuum damage mechanics simulator. Using orange peeling as a test case, we train a neural surrogate on 2,000 forward simulations and compare Covariance Matrix Adaptation Evolution Strategy (CMA-ES, a gradient-free evolutionary optimizer) with Proximal Policy Optimization (PPO, a reinforcement learning algorithm) across the original 9-dimensional parameter space and two learned 4-dimensional latent representations. Since different oranges have different material properties, a practical inverse system must handle arbitrary targets without retraining. We train a goal-conditioned PPO policy that learns a general inverse mapping: given any target description of peeling behavior, the policy produces a material parameter estimate in a single forward pass (8 surrogate evaluations, approximately 10ms). Operating in a normalizing flow latent space with a shared surrogate evaluator, the goal-conditioned policy achieves 0.642 actual recovery when validated through the simulator, outperforming the original parameter space by 23%. A warm-start extension that initializes CMA-ES refinement from the policy's output further improves recovery to 0.828 with 540 evaluations. These findings provide a practical framework for inverse food physics and lay groundwork for vision-driven material identification from video observations of food manipulation.

23.
arXiv (CS.CV) 2026-06-12

Spatially Grounded Concept Bottleneck Models via Part-Factorized Attention

Concept bottleneck models (CBMs) predict a layer of human-named attributes before predicting a class, which makes their decisions auditable. On fine-grained recognition tasks the concept heads are usually free to attend anywhere in the image, so a head named for one body region can be satisfied by evidence on another. This work studies a part-factorized CBM that removes that freedom by construction. The method has three components built on a frozen DINOv3 vision transformer. A learned foreground gate, trained on DINOv3 patch features, suppresses background patches inside the part attention. A set of part queries cross-attends to patch features and each of the 312 CUB attributes is routed, through a fixed concept-to-part map, to read only from the part token its name implies. A learnable two-dimensional Gaussian prior, injected additively in log space into the attention logits, breaks the permutation symmetry among part queries; its means are initialized from the dataset-average keypoint location of each part, which requires no per-image keypoint supervision at training or test time. On CUB-200-2011 the spatial-prior model matches a fully supervised baseline (88.85% versus 88.95% top-1) while raising pointing accuracy by 16 points (52.6% versus 36.4%). Replacing bounding-box supervision with a PCA foreground target and combining it with the Gaussian prior removes all per-image supervision and reaches 88.6% top-1 at about 70% pointing accuracy. A keypoint-fraction sweep shows that 0.5% of the training set (about 27 images) suffices to initialize the prior with no measurable loss. Removing part identity entirely is the harder case: without any spatial prior, pointing accuracy collapses to $2.9\%$.

24.
arXiv (CS.AI) 2026-06-17

IsabeLLM: Automated Theorem Proving Applied to Formally Verifying Consensus

arXiv:2606.18098v1 Announce Type: new Abstract: Advances in Artificial Intelligence (AI) have led AI for Theorem Proving to become a promising means of formally verifying computer systems. Whilst formal verification is traditionally reserved for safety-critical systems due to the required amount of expertise and effort, AI can help to automate a large amount of this workload and make it far more accessible. Blockchain-based systems are becoming increasingly popular and are frequently targeted by malicious actors, often resulting in huge financial losses, highlighting the need to better verify these systems and mitigate vulnerabilities. Arguably the most important component of these systems is the consensus protocol, which allows nodes to agree on decisions in a potentially adversarial environment. In this paper, we improve upon IsabeLLM, the automated theorem proving tool in Isabelle. Namely, we implement a Retrieval-Augmented Generation framework, Error tracing and counterexample generation for improved context supplied to the Large Language Model. Compatibility with the latest version of Isabelle and Sledgehammer is also implemented for improved efficiency. We compare the performance of the two versions of IsabeLLM in their ability to complete the verification of Bitcoin's Proof of Work consensus.

25.
arXiv (quant-ph) 2026-06-12

Schrödinger Symmetry in Spherically-symmetric Static Mini-superspaces with Matter Fields

arXiv:2512.13651v3 Announce Type: replace-cross Abstract: Schr\"{o}dinger symmetry has been shown to emerge in a ``fluid limit" from the full superspace to several mini-superspace models. To investigate one aspect of the robustness of this emergent symmetry, we consider two spherically-symmetric static mini-superspace models with matter fields at the classical level: (i) a Maxwell field with a cosmological constant and (ii) $n$ massless scalar fields. By developing a method based on canonical transformations, we demonstrate that for model (i), 3D Schrödinger symmetry emerges, and the solution is the (anti-)de Sitter Reissner-Nordström spacetime, and for model (ii), $(2+n)$D Schrödinger symmetry appears, and the solution is a generalized Janis-Newman-Winicour spacetime and its ``interior", a Kantowski-Sachs type closed universe. Furthermore, for the vacuum model, we find that 2D Schrödinger symmetry holds with different lapse functions and mini-superspace coordinates, suggesting the potential, yet unconfirmed, covariance of the symmetry. Finally, we propose a physical interpretation of the symmetry under the Hamiltonian constraint $H$: symmetry generators commuting with $H$ map a solution to another one, while those non-commuting with $H$ generate a new theory with the Schrödinger symmetry and the transformed configuration is a solution to the new theory. These results reinforce the robustness of the emergent Schrödinger symmetry and open new frontiers for exploring dynamics of matter and gravity.