中 EN
Sign In Register

Academic Intelligence · Curated Daily

Explore the Frontier of Global Academia

AcademicHub aggregates real-time literature from top journals and preprint platforms. Build your personal research radar and let large language models compile cross-disciplinary analysis briefings automatically.

Sign In Register
01.
arXiv (quant-ph) 2026-06-17

Hybrid Acousto-Optical Double Dressing of a Two-Level System

Authors:
Yuan Zhan↗Zixuan Wang↗Richard P. Mirin↗Kevin L. Silverman↗Shuo Sun↗

arXiv:2509.25847v2 Announce Type: replace Abstract: We experimentally investigate resonance fluorescence from a two-level system in a novel configuration where a strong laser drives an optical Rabi oscillation while an acoustic field parametrically modulates the frequency of the two-level system. We observe emission spectra that deviate markedly from the standard Mollow triplet, including dynamical cancellation of the central peak. A doubly dressed state model incorporating hybridization among the emitter, optical field, and acoustic field captures these features. Guided by this model, we experimentally validate the condition for optimal cooling of acoustic phonons in an emitter-optomechanical system. These results reveal new regimes of strongly driven quantum nonlinear interactions.

Read & Discuss → View Source →
02.
arXiv (CS.LG) 2026-06-19

Train, Retrieve, or Both? A Four-Arm Head-to-Head for Correct Statutory Citation on the Ontario Residential Tenancies Act

Authors:
Ali Asaria↗Tony Salomone↗Deep Gandhi↗

arXiv:2606.20359v1 Announce Type: new Abstract: Self-represented tenants, landlords, and help-desk staff need to be pointed at the provision of law that actually governs a question, with a correct statutory citation. We study this task on the Ontario Residential Tenancies Act, 2006 (RTA) and its core regulation, asking the operator's question empirically: is fine-tuning enough, or is hybrid retrieval needed? We run a four-arm head-to-head on Qwen2.5-7B-Instruct (base zero-shot, LoRA SFT-only, RAG-only, and an SFT+RAG hybrid), scored on citation exact-match (section+subsection) over a small, human-verification-pending real eval set. The base model cannot cite the RTA and SFT-only mis-recalls sections; retrieval is essential and drives hallucination to zero by construction; and the SFT+RAG hybrid scores highest at 0.481 exact-match with zero hallucinated citations. Its edge comes from SFT making provision selection more robust to the higher-recall candidate sets that hurt zero-shot RAG. Notably, this cheap bge-small hybrid matches or beats a pipeline built on bigger, specialized retrieval models (a larger embedder and a cross-encoder reranker), and a larger/improved training set does not help either: strong statutory-citation performance here does not require specialized retrieval models or more data. The artifact zeroes hallucination and clears the lift-over-base bar but does not reach the aspirational 0.70 exact-match target. All results are on a small, human-verification-pending real eval set and are reported as preliminary.

Read & Discuss → View Source →
03.
arXiv (CS.CV) 2026-06-12

RGB-S: Image-Aligned Tactile Saliency for Robust Dexterous Manipulation

Authors:
Shengcheng Luo↗Kefei Wu↗Xiaoying Zhou↗Wanlin Li↗Ziyuan Jiao↗Chenxi Xiao↗

Effective visuo-tactile integration is critical for robotic dexterous manipulation, especially when visual observations are unreliable or occluded. However, robustly aligning sparse, heterogeneous tactile measurements with dense visual representations remains a fundamental challenge. Most existing approaches require policies to learn cross-modal correspondences implicitly from limited demonstrations, without leveraging geometric priors. As a result, they are often data-inefficient and generalize poorly when visual observations are degraded. To address this limitation, we propose a framework that explicitly grounds physical contacts in the image domain. Using robot forward kinematics and camera calibration, we project tactile sensor locations directly onto the RGB image plane. We then render force-modulated Gaussian saliency maps to model spatial uncertainty arising from kinematic and calibration errors. By integrating these 2D spatial anchors through a zero-initialized conditioning architecture, our method injects physical contact priors into standard visual backbones while preserving pre-trained visual representations. We evaluate our method on six dexterous manipulation tasks in both simulation and the real world under severe visual occlusions. Real-world experiments show that explicit RGB-S grounding in the image domain improves real-world occluded manipulation success rates by $26.7$ percentage points over the strongest implicit visuo-tactile baseline, suggesting its improved spatial reasoning and robustness to occlusion. Project page: touch-as-saliency.github.io

Read & Discuss → View Source →
04.
arXiv (CS.CL) 2026-06-16

Sycophancy as Material Failure under Pushback Loading: A Multi-Axis Characterization Across Three Loading Cases and up to Seventeen Material Charges

Authors:
Ferdinand M. Schessl↗

Sycophancy in LLMs is documented across 70+ papers, but expert agreement on construct boundaries remains low (ICC=.184; Ye et al., 2026). The construct fragments because behavioral classification depends on which surface form is privileged. We adopt a materials-science framing: conversation as test specimen under load, LLM-model as material charge, pushback as progressive load, stance-flip as material failure. We characterize this failure across three loading cases (debate n=1000; false-presuppositions n=3400; ethical-setting n=3400; 10-17 material charges per case; 7800 specimens total) using 14 turn-level axis-measurements spanning velocity, damage accumulation, frame-drift, brittleness, and direction stability, plus three speaker-resolved axes from an independent pipeline. The measurements are Hooke-coupled ($\sigma = E \cdot \varepsilon$ analog) and reproduce across loading cases with effects up to $|r_{rb}| = 0.35$ on debate; the sign structure adds a second pattern: the ethical-setting case inverts the velocity and accumulation blocks. Variance composition partitions into two profiles: debate is charge-dominated (brittle-fracture-like: the material grade decides), false-presuppositions and ethical-setting are topic-dominated (creep-like: the load decides); the ratios (2.03 vs 0.13/0.17) are estimator-dependent, for debate even in direction. Cross-judge reliability (GPT-4o vs Haiku 4.5) shows debate scoring is judge-robust (Cohen's $\kappa = 0.88$) while false-presupposition scoring is judge-sensitive ($\kappa = 0.36$) – a caveat single-judge benchmarks must report. This is the methodological move Ye et al.'s diagnosis calls for: a multi-axis characterization that does not depend on which surface form of the construct one privileges.

Read & Discuss → View Source →
05.
arXiv (CS.AI) 2026-06-12

Select and Improve: Understanding the Mechanics of Post-Training for Reasoning

Authors:
Akshay Krishnamurthy↗Audrey Huang↗Nived Rajaraman↗

arXiv:2606.13125v1 Announce Type: cross Abstract: Reinforcement learning has rapidly emerged as a key component in the training of reasoning and coding models, yet it remains poorly understood from a mechanistic perspective. We study how and through what underlying processes capabilities are acquired or enhanced via reinforcement learning post-training. Our analysis, based on controlled math reasoning experiments with Qwen-2.5-1.5B, reveals two core mechanisms: strategy selection and strategy improvement. Our results highlight the role of SFT data and reinforcement learning data in activating these mechanisms, in particular showing how supervising the model on diverse reasoning strategies can enable strategy selection and how increasing difficulty in reinforcement learning data can enable strategy improvement. Taken together, our results provide mechanistic insight into RL training and suggest practical interventions to continue scaling reasoning capabilities.

Read & Discuss → View Source →
06.
arXiv (CS.AI) 2026-06-16

Towards Unified Song Generation and Singing Voice Conversion with Accompaniment Co-Generation

Authors:
Ziyu Zhang↗Chunyu Qiang↗Xiaopeng Wang↗Yuxin Guo↗Kang Yin↗Wenjie Tian↗Jingbin Hu↗Tianlun Zuo↗Zhao Guo↗Teng Ma↗Yuzhe Liang↗Chen Zhang↗…

arXiv:2606.07015v2 Announce Type: replace-cross Abstract: While song generation and singing voice conversion (SVC) have evolved significantly, they have long been developed isolated: the former lacks zero-shot speaker cloning, while the latter overlooks vocal-accompaniment synergy. To bridge this gap, we propose UniSinger, the first end-to-end framework unifying speaker cloning song generation and accompaniment co-generation SVC. Building on the multimodal diffusion transformer, we construct a unified speaker embedding space transferring speaker representation from SVC to song generation, endowing fine-grained cross-task timbre control. To mitigate multi-task optimization conflicts, we design a curriculum learning strategy using task-specific modality masking to guide the model to gradually master the generative mechanisms among semantic content, vocal timbre, and accompaniment. Experiments show state-of-the-art performance on both tasks and realizes complementary benefits, offering new possibilities for intelligent music production.

Read & Discuss → View Source →
07.
arXiv (CS.CV) 2026-06-15

Point Cloud Upsampling through Patch-based Frequency Superposition

Authors:
Marina Ritthaler↗Azhar Hussian↗Vasileios Belagiannis↗Andr\'e Kaup↗

In recent years, neural networks have become the dominant models in most point cloud upsampling methods. Although these approaches are achieving good results, they do have drawbacks, such as a lack of interpretability and data dependency. Moreover, they have to be trained on a dataset that is similar to the test data in order to perform well. To avoid these disadvantages, we propose Point Cloud Upsampling through Patch-based Frequency Superposition (PUtPFS), an optimization-based approach that selects subsets of points and estimates the surface of this set through superpositioning spatial frequencies. Then, new points are placed on this surface. By successively selecting points in the least dense regions of the point cloud, a uniform upsampling can be reached. With this method, we surpass the current best upsampling results in the commonly considered point-to-surface distance. Furthermore, we achieve the best Chamfer and Hausdorff distance among the optimization-based approaches. As an additional advantage, our method does not need any training data and is mathematically interpretable.

Read & Discuss → View Source →
08.
medRxiv (Medicine) 2026-06-11

What level of expertise is necessary to generate ACLS training test questions: pre-med students vs. artificial intelligence?

Authors:
LoGalbo↗S. S↗Richman↗Wang↗Saji↗Traore↗Oliva↗Wu↗Drudi↗Foster↗Bhandari↗Delfillo↗…

Abstract Introduction In-hospital cardiac arrest carries high mortality despite standardized ACLS training. Educators face increasing time constraints in developing assessment tools for ACLS training. Two possible solutions to this problem are using pre-medical students or using artificial intelligence to generate test questions. This study compared the quality of pre-medical student-generated ACLS test questions vs. AI-generated ACLS test questions, testing the hypothesis that AI-generated questions are non-inferior to student-generated questions. Methods Ten pre-medical students created ACLS questions following predefined criteria, while an AI model (Northwell's Artificial Intelligence Hub) generated comparable questions. A blinded ACLS-certified physician evaluated questions on the qualities of Alignment, Clarity, Cognitive Level, and Question Design using a standardized rubric (Likert scale: 1 = poor quality, 5 = excellent). Student's T-test and Chi-square analysis were used to compare the quality of questions on different rubric domains within each arm (student vs. AI) and within one domain (eg, question Clarity) between arms. The Student's T test was used when 2 comparator groups were compared (eg, Clarity of student-generated vs. AI-generated questions) within one arm. The ANOVA test was used when comparing more than 2 comparator groups (eg, Alignment vs. Clarity vs. Cognitive Level) within one arm. Statistical significance was set as a priority at p

Read & Discuss → View Source →
09.
arXiv (quant-ph) 2026-06-12

Path integral control of open quantum systems

Authors:
Aar\'on Villanueva↗Hilbert Kappen↗

arXiv:2410.18635v4 Announce Type: replace Abstract: We investigate open-loop quantum state preparation for a class of open quantum systems whose dynamics follow a Gorini-Kossakowski-Lindblad-Sudarshan (GKLS) master equation that admits a trajectory-based stochastic representation. The deterministic control objective is reformulated as a stochastic optimal control problem – interpreting stochasticity as a methodological tool akin to stochastic Schrödinger equation unravelings – which situates the problem within the path integral control framework. For the class of GKLS generators under consideration, this reformulation leads to an explicit expression for the optimal control as a weighted average over stochastic quantum trajectories, thereby eliminating the need for gradient evaluations. Building on this theoretical result, we derive a control update rule for piecewise-constant control pulses and demonstrate that adaptive importance sampling progressively enhances the control estimator during optimization, culminating in the algorithm we term Path integral Quantum Control (PiQC). We further introduce an annealed variant of PiQC, wherein a synthetic noise schedule gradually steers open-system trajectories toward closed-system dynamics, enabling high-fidelity unitary state preparation. Numerical studies on a dissipative single-qubit system and a multi-qubit Nuclear Magnetic Resonance model verify that PiQC yields precise open-loop controls and displays robustness to Hamiltonian perturbations. We propose PiQC as a trajectory-based alternative to gradient-based approaches, which might offer a viable solution in quantum control problems where gradient computation is infeasible or computationally demanding.

Read & Discuss → View Source →
10.
arXiv (CS.LG) 2026-06-16

TS-ICL: A Flexible Time-Indexed Foundation Model for Time Series via In-Context Learning

Authors:
Etienne Le Naour↗Tahar Nabil↗Adrien Petralia↗

arXiv:2606.05878v2 Announce Type: replace Abstract: Foundation models mark a profound paradigm shift in time series modeling, with task-specific models being superseded by general-purpose zero-shot models. Yet, current approaches primarily focus on forecasting, while real-world time series are often irregularly and partially observed, requiring models that can jointly forecast, impute missing values, and handle degraded sampling conditions. To address these challenges, we introduce TS-ICL, a novel probabilistic In-Context Learning encoder–regressor Transformer that unifies forecasting and imputation. TS-ICL formulates time series tasks as timestamp-aligned regression and naturally incorporates covariates by training on synthetic dependency structures generated from a novel causal data prior. Empirically, TS-ICL achieves a new state-of-the-art in imputation, while remaining competitive with leading forecasting foundation models across both univariate and covariate-aware benchmarks. It shows particularly strong performance in forecasting with partially observed look-back windows.

Read & Discuss → View Source →
11.
arXiv (math.PR) 2026-06-18

Rigidity of infinite exchangeable sequences with Gaussian marginals

Authors:
Maximillian Newman↗

arXiv:2606.18654v1 Announce Type: new Abstract: We study infinite exchangeable sequences with Gaussian one-dimensional marginals. We formulate the conjecture that joint Gaussianity of a single pair of coordinates forces the entire sequence to be a Gaussian process. Although this conjecture remains open, we prove that joint Gaussianity of the first four coordinates is sufficient. We also establish the corresponding two-point criterion under the additional assumption that the directing measure is almost surely infinitely divisible.

Read & Discuss → View Source →
12.
arXiv (CS.CL) 2026-06-18

The Personalization Trap: How User Memory Alters Emotional Reasoning in LLMs

Authors:
Xi Fang↗Weijie Xu↗Yuchong Zhang↗Stephanie Eckman↗Scott Nickleach↗Chandan K. Reddy↗

When an AI assistant remembers that Sarah is a single mother working two jobs, does it interpret her stress differently than if she were a wealthy executive? As personalized AI systems increasingly incorporate long-term user memory, understanding how this memory shapes emotional reasoning is critical. We investigate how user memory affects emotional intelligence in large language models (LLMs) by evaluating 15 models on human-validated emotional intelligence tests. We find that identical scenarios paired with different user profiles produce systematically divergent emotional interpretations. Across validated user-independent emotional scenarios and diverse user profiles, systematic biases emerged in several high-performing LLMs where advantaged profiles received more accurate emotional interpretations. Moreover, LLMs demonstrate significant disparities across demographic factors in emotion reasoning and supportive recommendations tasks, indicating that personalization mechanisms can embed social hierarchies into models' emotional reasoning. These results highlight a key challenge for memory-enhanced AI: systems designed for personalization may reinforce social inequalities. To mitigate these disparities, we curate a general-purpose preference dataset designed to reduce demographic profiles' influence on emotional understanding.

Read & Discuss → View Source →
13.
arXiv (CS.LG) 2026-06-11

From Persistence to Survival: Hypothesis Testing, Effect Sizes and Vectorisation for Topological Features

Authors:
Juliette Murris↗Bernadette Stolz↗Karsten Borgwardt↗

arXiv:2606.11911v1 Announce Type: cross Abstract: Persistence diagrams are common representations in topological data analysis, but they do not naturally live in a vector space, and the statistical tools developed for comparing them have largely evolved separately from those used for downstream prediction. We introduce STRAND (Survival Topological Representation ANalysis of Diagrams), which treats (collections of) PDs as survival data: each topological feature with persistence value $p = d - b$ is a fully observed time-to-event, and the persistence survival function $S(t) = \mathbb{P}(p > t)$ is the central object for comparing diagrams. From this single representation we derive (i) a non-parametric two-sample test with calibrated Type I error and high power from a small number of diagrams; (ii) interpretable effect sizes; and (iii) a 1-Wasserstein-stable feature vector for downstream machine learning. We validate calibration and power on synthetic manifolds with controlled topology, demonstrate competitive vectorisation across 14 graph and 3D point cloud benchmarks, and apply the method to study functional brain connectivity in fMRI/neuroscience data. To our knowledge, STRAND is the first method to provide hypothesis testing and vectorisation for persistence diagrams from a single coherent and interpretable representation.

Read & Discuss → View Source →
14.
arXiv (CS.LG) 2026-06-16

Enhancing Physics-Informed Neural Networks Through Feature Engineering

Authors:
Shaghayegh Fazliani↗Zachary Frangella↗Madeleine Udell↗

arXiv:2502.07209v4 Announce Type: replace Abstract: Physics-Informed Neural Networks (PINNs) seek to solve partial differential equations (PDEs) with deep learning. Mainstream approaches that deploy fully-connected multi-layer deep learning architectures require prolonged training to achieve even moderate accuracy, while recent work on feature engineering allows higher accuracy and faster convergence. This paper introduces SAFE-NET, a Single-layered Adaptive Feature Engineering NETwork that achieves orders-of-magnitude lower errors with far fewer parameters than baseline feature engineering methods. SAFE-NET returns to basic ideas in machine learning, using Fourier features, a simplified single hidden layer network architecture, and an effective optimizer that improves the conditioning of the PINN optimization problem. Numerical results show that SAFE-NET converges faster and typically outperforms deeper networks and more complex architectures. It consistently uses fewer parameters – on average, 65% fewer than the competing feature engineering methods – while achieving comparable accuracy in less than 30% of the training epochs. Moreover, each SAFE-NET epoch is 95% faster than those of competing feature engineering approaches. These findings challenge the prevailing belief that modern PINNs effectively learn features in these scientific applications and highlight the efficiency gains possible through feature engineering.

Read & Discuss → View Source →
15.
arXiv (CS.AI) 2026-06-18

Forecasting what Matters: Decision-Focused RL for Controlled EV Charging with Unknown Departure Times

Authors:
Giuseppe Gabriele↗Fabio Pavirani↗Seyed Soroush Karimi Madahi↗Chris Develder↗

arXiv:2606.19199v1 Announce Type: cross Abstract: The recent growth of EV adoption poses challenges for power systems, including increased peak demand and potential grid instability. Smart control of EV charging – e.g., based on reinforcement learning (RL) – can alleviate these issues by learning temporal and contextual patterns from historical data. Yet, in real-world scenarios, key features, such as departure time, often are unavailable. This, in turn, makes it harder for an RL agent to learn and execute an effective charging policy. To mitigate this uncertainty, a trained forecaster can approximate the unknown features from available data. However, since these forecasting models are typically trained for accuracy (rather than their impact on a downstream agent's decision quality), their errors may propagate and hinder the overall performance of a controller that is using the forecasts. To avoid this, we propose a decision-focused RL (DF-RL) framework in which the forecaster is trained end-to-end, i.e., with feedback from the charging policy actions taken by the RL agent. Such joint training of both the forecaster and controller ultimately results in higher-quality actions: our proposed DF-RL method yields superior charging decisions compared to other baselines, achieving up to a 14% improvement in total reward and a 55% reduction of unsupplied energy (i.e., charging that failed to happen because the EV already left), relative to the RL method without departure time forecasting.

Read & Discuss → View Source →
16.
arXiv (CS.LG) 2026-06-19

BLISS: A Lightweight Bilevel Influence Scoring Method for Data Selection in Language Model Pretraining

Authors:
Jie Hao↗Rui Yu↗Wei Zhang↗Huixia Wang↗Jie Xu↗Mingrui Liu↗

arXiv:2510.06048v5 Announce Type: replace Abstract: Effective data selection is essential for pretraining large language models (LLMs), enhancing efficiency and improving generalization to downstream tasks. However, existing approaches often require leveraging external pretrained models, making it difficult to disentangle the effects of data selection from those of the external pretrained models. In addition, they often overlook the long-term impact of selected data if the model is trained to convergence, primarily due to the prohibitive cost of full-scale LLM pretraining. In this paper, we introduce BLISS (BileveL Influence Scoring method for data Selection): a lightweight data selection method that operates entirely from scratch, without relying on any external pretrained oracle models, while explicitly accounting for the long-term impact of selected data. BLISS leverages a small proxy model as a surrogate for the LLM and employs a score model to estimate the long-term influence of training samples if the proxy model is trained to convergence. We formulate data selection as a bilevel optimization problem, where the upper-level objective optimizes the score model to assign importance weights to training samples, ensuring that minimizing the lower-level objective (i.e., training the proxy model over the weighted training loss until convergence) leads to best validation performance. Once optimized, the trained score model predicts influence scores for the dataset, enabling efficient selection of high-quality samples for LLM pretraining. We validate BLISS by pretraining 410M/1B/2.8B Pythia and LLaMA-0.5B models on selected subsets of the C4 dataset. Notably, under the 1B model setting, BLISS achieves $1.7\times$ speedup in reaching the same performance as the state-of-the-art method, demonstrating superior performance across multiple downstream tasks.

Read & Discuss → View Source →
17.
arXiv (CS.LG) 2026-06-17

Uncertainty Quantification of Engineering Structures by Polynomial Chaos Expansion and Multivariate Active Learning

Authors:
Qitian Lu↗Jafar Jafari-Asl↗Panagiotis Spyridis↗Lukas Novak↗

arXiv:2606.17233v1 Announce Type: new Abstract: In many engineering applications, a single high-fidelity model produces multiple quantities of interest (QoIs) under the same input parameters, e.g. finite element models of complex physical systems. To alleviate the high computational cost of direct model evaluations, surrogate models are widely used to construct efficient approximations of model responses. Naturally, the accuracy of surrogates strongly depends on the quality of the experimental design (ED). However, a single ED may not provide an adequate representation for all outputs simultaneously, especially when different outputs exhibit varying sensitivities to the input variables. A straightforward solution is to perform separate sampling for each output, but this results in increased sampling complexity and computational cost. From a statistical perspective, such an approach also ignores potential correlations among all outputs and may compromise data consistency. To address this issue, an adaptive sequential sampling method for constructing polynomial chaos expansion surrogate models is generalized for vector valued QoIs. The method sequentially selects new samples from a candidate pool based on their local contribution to the output variance, while balancing distance-based exploration of the input space and exploitation of aggregated variance information across all outputs. Its performance is compared with non-sequential Latin Hypercube Sampling through several numerical examples from engineering problems. Numerical results demonstrate that the proposed strategy improves both surrogate accuracy and stability, and provides a more reliable estimation of second-order statistics.

Read & Discuss → View Source →
18.
medRxiv (Medicine) 2026-06-15

HPV Self-Sampling in Cervical Screening: A Rapid Review

Authors:
Tesha↗N. A↗Nevill↗Taylor-Rowan↗Mulholland↗Quinn↗Noel-Storr↗Sutton↗A. J↗Wu↗

Introduction Cervical cancer is the fourth largest cause of cancer deaths in women. HPV self-sampling could increase uptake of cervical screening. This rapid review aimed to determine the accuracy, concordance, uptake and acceptability of self-sampling over clinician-collected samples in high income countries. Method We followed Cochrane Rapid Reviews Methods. Top-up of 4 systematic reviews and meta-analyses was performed. Narrative data synthesis was conducted and meta-analysis where applicable. Databases searched were MEDLINE, EMBASE, CENTRAL and clinical trial registries. Risk of bias was assessed using AMSTAR 2, QUADAS, the Cochrane Risk of Bias (RoB), or the Nudelman and Otto, 2020 tool, depending on the study type. Findings The review included 39 studies for accuracy, 38 studies for concordance, 37 uptake and 48 studies for acceptability. Self-sampling has similar accuracy as clinician-collected samples when PCR-based assays are used. The overall agreement of self-sampling and clinician-collected samples was 87.1%(95%CI;85.6-88.6) with a kappa value of 0.70(95%CI;0.67-0.73). Mail-to-all strategies had higher uptake with participation differences of 11.3%(95%CI:8.4-14.2) in the intention-to-treat analysis and 7.7%(95%CI:4.7-10.8) in the per protocol analysis. Self-sampling is acceptable to non-attendees (91%(95%CI;85.3-94.6). Conclusion and Recommendation Self-sampling shows good performance on the four clinical effectiveness indicators of accuracy, concordance, uptake and acceptability.

Read & Discuss → View Source →
19.
medRxiv (Medicine) 2026-06-18

Automated Airways Characterization and Assessment of Cystic Fibrosis from CT Imaging

Authors:
Chong Chie↗J. A. K. H↗Cooper↗M. L↗Persohn↗S. A↗Burton↗C. P↗Salama↗Territo↗P. R↗

Background Advancements in medical imaging have enabled non-invasive diagnosis and staging of cystic fibrosis (CF) using CT scans, revealing dilated airways, an increased number of visible airways, and airway generation splits in these patients. However, manual characterization of airways remains time-consuming and challenging due to the numerous structural changes, thereby limiting clinical feasibility. This study aims to develop an automated algorithm to characterize airways from segmented lung CT scans and apply this to a retrospective population. This approach reduces the time required to analyze images and obtain disease-staging results. Methods This framework consists of two stages. The first stage extracts and skeletonizes the airway tree from lung CTs, while the second stage measures lung features, including airway volumes, branch counts, generation splits, diameters, and cross-sectional areas. This permits comprehensive characterization for use in clinical assessment. Results The airways analysis was performed on 169 CT volumes ranging in age from 6 to 18 years of age, revealing substantial differences in detected airway branches, generation splits, and normalized airway volume between the control and CF groups. The framework also measures airway diameters and cross-sectional areas, revealing an increase in the number of small airways in cystic fibrosis patients, due to early bronchiectasis. These findings align with previous research and demonstrate the framework's ability to accurately quantify airway changes in patients with CF. Discussion The framework extracts entire airway trees, facilitating measurements of volume, branch count, diameters, and cross-sectional areas, which change with CF severity and/or treatment. However, partial lung atelectasis can limit the accuracy of airway detection in moderate-to-severe cases. Funding NIA U54 AG054345 and NIA R21 AG07857501

Read & Discuss → View Source →
20.
arXiv (CS.LG) 2026-06-18

Self-attention-based non-linear basis transformations for compact latent space modelling of dynamic optical fibre transmission matrices

Authors:
Yijie Zheng↗Robert J. Kilpatrick↗David B. Phillips↗George S. D. Gordon↗

arXiv:2406.07775v2 Announce Type: replace Abstract: Multimode optical fibres are hair-thin strands of glass that efficiently transport light. They promise next-generation medical endoscopes that provide unprecedented sub-cellular image resolution deep inside the body. However, confining light to such fibres means that images are inherently scrambled in transit. Conventionally, this scrambling has been compensated by pre-calibrating how a specific fibre scrambles light and solving a stationary linear matrix equation that represents a physical model of the fibre. However, as the technology develops towards real-world deployment, the unscrambling process must account for dynamic changes in the matrix representing the fibre's effect on light, due to factors such as movement and temperature shifts, and non-linearities resulting from the inaccessibility of the fibre tip when inside the body. Such complex, dynamic and nonlinear behaviour is well-suited to approximation by neural networks, but most leading image reconstruction networks rely on convolutional layers, which assume strong correlations between adjacent pixels, a strong inductive bias that is inappropriate for fibre matrices which may be expressed in a range of arbitrary coordinate representations with long-range correlations. We introduce a new concept that uses self-attention layers to dynamically transform the coordinate representations of varying fibre matrices to a basis that admits compact, low-dimensional representations suitable for further processing. We demonstrate the effectiveness of this approach on diverse fibre matrix datasets. We show our models significantly improve the sparsity of fibre bases in their transformed bases with a participation ratio, p, as a measure of sparsity, of between 0.01 and 0.11. Further, we show that these transformed representations admit reconstruction of the original matrices with < 10% reconstruction error, demonstrating the invertibility.

Read & Discuss → View Source →
21.
arXiv (CS.LG) 2026-06-19

Evaluating deep learning models for fault diagnosis of a rotating machinery with epistemic and aleatoric uncertainty

Authors:
Reza Jalayer↗Masoud Jalayer↗Andrea Mor↗Carlotta Orsenigo↗Carlo Vercellis↗

arXiv:2412.18980v2 Announce Type: replace Abstract: Uncertainty-aware deep learning (DL) models recently gained attention in fault diagnosis as a way to promote the reliable detection of faults when out-of-distribution (OOD) data arise from unseen faults (epistemic uncertainty) or the presence of noise (aleatoric uncertainty). In this paper, we present the first comprehensive comparative study of state-of-the-art uncertainty-aware DL architectures for fault diagnosis in rotating machinery, where different scenarios affected by epistemic uncertainty and different types of aleatoric uncertainty are investigated. The selected architectures include sampling by dropout, Bayesian neural networks, and deep ensembles. Moreover, to distinguish between in-distribution and OOD data in the different scenarios two uncertainty thresholds, one of which is introduced in this paper, are alternatively applied. Our empirical findings offer guidance to practitioners and researchers who have to deploy real-world uncertainty-aware fault diagnosis systems. In particular, they reveal that, in the presence of epistemic uncertainty, all DL models are capable of effectively detecting, on average, a substantial portion of OOD data across all the scenarios. However, deep ensemble models show superior performance, independently of the uncertainty threshold used for discrimination. In the presence of aleatoric uncertainty, the noise level plays an important role. Specifically, low noise levels hinder the models' ability to effectively detect OOD data. Even in this case, however, deep ensemble models exhibit a milder degradation in performance, dominating the others. These achievements, combined with their shorter inference time, make deep ensemble architectures the preferred choice.

Read & Discuss → View Source →
22.
arXiv (CS.CL) 2026-06-18

Approximate Structured Diffusion for Sequence Labelling

Authors:
Nicolas Floquet↗Joseph Le Roux↗Nadi Tomeh↗

Sequence labelling, a core task of Natural Language Processing (NLP), consists in assigning each token of an input sentence a label. From a Machine Learning point of view, sequence labelling is often cast as a Linear-Chain Conditional Random Field (CRF) parametrised by a neural network. While this approach gives good empirical results, CRFs assume a finite decision span (eg label bigrams) which can limit their expressivity and hurt performance when long-range dependencies are required. We show we can leverage diffusion to train a CRF conditioned on an entire label sequence, with the caveat that the condition is on a noisy version of labels. We show experimentally that this method, in conjunction with approximate CRF inference, improves label accuracy with a 16.5% error reduction for POS-tagging.

Read & Discuss → View Source →
23.
arXiv (CS.LG) 2026-06-16

ML Inference Scheduling with Predictable Latency

Authors:
Haidong Zhao↗Nikolaos Georgantas↗

arXiv:2512.18725v3 Announce Type: replace Abstract: Machine learning (ML) inference serving systems can schedule requests to improve GPU utilization and to meet service level objectives (SLOs) or deadlines. However, improving GPU utilization may compromise latency-sensitive scheduling, as concurrent tasks contend for GPU resources and thereby introduce interference. Given that interference effects introduce unpredictability in scheduling, neglecting them may compromise SLO or deadline satisfaction. Nevertheless, existing interference prediction approaches remain limited in several respects, which may restrict their usefulness for scheduling. First, they are often coarse-grained, which ignores runtime co-location dynamics and thus restricts their accuracy in interference prediction. Second, they tend to use a static prediction model, which may not effectively cope with different workload characteristics. In this paper, we evaluate the potential limitations of existing interference prediction approaches, finding that coarse-grained methods can lead to noticeable deviations in prediction accuracy and that static models degrade considerably under changing workloads.

Read & Discuss → View Source →
24.
arXiv (quant-ph) 2026-06-16

Comparative Performance Analysis of NIST PQC Standards: From STM32 Software Limitations to FPGA-SoC Acceleration

Authors:
Mustafa Akif Y{\i}ld{\i}r{\i}m↗Osman Tokluoglu↗

arXiv:2606.15744v1 Announce Type: new Abstract: The rapid advancement of quantum computing poses a significant threat to classical public-key cryptographic systems, necessitating the transition to Post-Quantum Cryptography (PQC). This study investigates the implementation challenges of NISTstandardized signature schemes on resource-constrained embedded hardware. We present a comparative analysis of SPHINCS+ and CRYSTALS-Dilithium on an ARM Cortex-M4 (STM32F407G) microcontroller. Our findings reveal that SPHINCS+ is practically unusable in this software-only environment, with impractical execution times. Furthermore, the reference Dilithium implementation failed to execute entirely on the MCU due to severe RAM and timing constraints. To overcome these hardware limitations, we integrated a hardware-accelerated Dilithium core onto a Xilinx Zynq-7000 ZedBoard SoC. By implementing a specialized Number Theoretic Transform (NTT) accelerator in the FPGA fabric, we achieved successful execution with performance rates for key generation and signature generation at millisecond levels. These results demonstrate that while pure software PQC is non-viable for standard microcontrollers, a hardware-software codesign approach provides the necessary efficiency for quantumresistant embedded systems.

Read & Discuss → View Source →
25.
arXiv (CS.AI) 2026-06-11

RoboNaldo: Accurate, Stable and Powerful Humanoid Soccer Shooting via Motion-Guided Curriculum Reinforcement Learning

Authors:
Yichao Zhong↗Yidan Lu↗Yuhang Lu↗Tianyang Tang↗Haoguang Mai↗Yixuan Pan↗Tianyu Li↗Li Chen↗Jingbo Wang↗Zhongyu Li↗Peng Lu↗Hongyang Li↗…

arXiv:2606.11092v2 Announce Type: replace-cross Abstract: Elite humanoid soccer shooting requires whole-body stability, high-impulse whole-body interactions, and accuracy to targets. Motion tracking-driven reinforcement learning (RL) provides stability in whole-body movement coordination, but a fixed reference makes it hard to adapt to varied ball positions and strike timings; in contrast, task reward-driven RL struggles to explore and discover valid kicks from scratch. We therefore introduce RoboNaldo, a three-stage motion-guided curriculum RL framework for high-impulse humanoid interaction. A single human-kick reference is used as a scaffold and progressively shifts optimization towards shooting performance. The curriculum first learns a stable whole-body kicking prior, then adapts the kick to free-kick settings where the ball is stationary at random positions, and finally extends it to moving-ball shooting through a locomotion-command and kick-trigger interface. A high-level heuristic planner controls this interface during training, while alternative high-level controllers can drive the same low-level policy at inference. In simulation, RoboNaldo demonstrates free-kick shot error 48.6% lower and shoot velocity 2.96x than prior work baselines. In real world on a Unitree G1 with onboard perception, RoboNaldo attains 0.73 m and 0.86 m average target shooting error from 3 m away in free-kick and moving-ball cases, accordingly. And the post-contact ball velocity reaches 13.10 m/s, which is 59-71% of reported professional open-play shot speed. Project page: https://opendrivelab.com/RoboNaldo.

Read & Discuss → View Source →