Academic Intelligence · Curated Daily

探索全球前沿学术脉络

AcademicHub 汇聚顶级期刊与预印本平台的实时文献。定制您的专属科研雷达,利用大语言模型自动生成交叉领域文献分析简报。

01.
medRxiv (Medicine) 2026-06-10

Estimating COVID-19 Cumulative Incidence from Seroprevalence Surveys accounting for Time-Varying Seroreversion: A Fully Bayesian Methodology

Seroprevalence surveys reveal the extent of humoral immunity against pathogens such as severe acute respiratory syndrome coronavirus 2 (SARS-CoV-2), and under some circumstances represent cumulative incidence of prior infection. However, antibody waning - or seroreversion - biases these estimates by reducing assay sensitivity in a time-varying manner. Because assay sensitivity decays over time, naively using serosurveys can substantially bias estimates of SARS-CoV-2 cumulative incidence and fatality rates. The Bayesian assay-specific, time-varying sensitivity adjustment developed in this paper can reliably correct for this bias and account for the delay between infection and serosurvey. In seroprevalence studies conducted in the United States in 2020, adjusting for time-varying sensitivity increased cumulative incidence by up to 1.4-fold, with an adjustment of 1.08 for a national study. Our estimates contrast with a previously published 2-fold adjustment that did not account for assay design. This suggests that previous analyses overestimated cumulative incidence by applying seroreversion corrections that did not account for assay-specific effects, or underestimated cumulative incidence by not applying seroreversion corrections. These biases imply fatality rate underestimation and overestimation, respectively. Our model provides a framework for design-specific time-varying sensitivity corrections in seroprevalence surveys for other pathogens.

02.
arXiv (quant-ph) 2026-06-17

Split-Head Quantum Generative Adversarial Network for Crystalline Material Discovery

arXiv:2606.17852v1 Announce Type: new Abstract: The discovery of novel crystalline materials is a critical challenge in computational materials science, often limited by the spatial representation limitations and mode collapse typical of classical generative models. Traditionally, developing Quantum GANs for continuous 3D space is hindered by the limited capacity of near-term hardware. To overcome this, we adapt a physics-informed "split-head" architecture right from the quantum trunk to explicitly decouple macroscopic lattice bounds from microscopic atomic coordinates, significantly maximizing resource efficiency. This study disentangles the contributions of quantum circuits from these architectural priors by evaluating a Split-Head Quantum Generative Adversarial Network against an architecture-matched classical ablation model. Evaluated on the highly constrained Mg-Mn-O system, the results reveal a highly nuanced performance dichotomy between the advanced models. The architecture-matched classical ablation model demonstrated superior thermodynamic precision. Conversely, the integration of quantum circuits in the SH-QGAN drove unparalleled structural breadth and latent space exploration, more than doubling the ablation's geometric validity and successfully generating novel, metastable candidates converging on the Mg2MnO4 stoichiometry. These findings clarify that while architectural separation of cell and atom generation drives strict thermodynamic precision, quantum feature mapping independently provides the spatial diversity necessary to overcome mode collapse. Both mechanisms offer distinct, complementary enhancements for the generative discovery of advanced materials.

03.
arXiv (CS.LG) 2026-06-18

Unreduced Persistence Diagrams for Topological Machine Learning

arXiv:2507.07156v2 Announce Type: replace-cross Abstract: Supervised machine learning pipelines trained on features derived from persistent homology have been experimentally observed to ignore much of the information contained in a persistence diagram. Computing persistence diagrams is often the most computationally demanding step in such a pipeline, however. To explore this dynamic, we introduce several methods to generate topological feature vectors from unreduced boundary matrices and investigate their theoretical and computational properties. We compared the performance of pipelines trained on vectorizations of unreduced PDs to vectorizations of fully-reduced PDs across several data and task types. Our results indicate that models trained on PDs built from unreduced diagrams can perform on par and even outperform those trained on fully-reduced diagrams on some tasks. We also benchmarked the computational performance of an algorithm for computing unreduced diagrams, which was implemented as a heavily modified version of Ripser. These computations are parallelizable and required an order of magnitude less memory on average compared to computing full persistence diagrams. Our results suggest that machine learning pipelines which incorporate topology-based features may benefit in terms of computational cost and performance by utilizing information contained in unreduced boundary matrices.

04.
arXiv (quant-ph) 2026-06-11

Fabricating fiber cavity mirror substrates compatible with high coupling efficiency

arXiv:2606.12168v1 Announce Type: cross Abstract: Fiber optical cavities offer small mode volumes and correspondingly strong light-matter interactions in an open Fabry-Perot geometry. However, existing fabrication techniques do not reliably produce substrates with surface profiles amenable to high mode matching between the cavity mode and fiber core, thereby limiting the achievable collection efficiency. Here we present a technique to fabricate fiber mirror substrates while using $in situ$ reflectometry to constrain the achievable mode matching prior to coating. By measuring the back-reflection from freshly cleaved fiber tips, we pre-select 138 fibers compatible with 96.5-99.5% mode matching, and after a single CO$_2$ laser ablation pulse, these fibers remained compatible with 95.3-99.2\%. This simple technique provides rapid feedback during each stage of substrate fabrication, greatly enhancing the yield of viable fiber mirror substrates prior to (expensive) coating runs.

05.
arXiv (CS.LG) 2026-06-19

SMT-AD: a scalable quantum-inspired anomaly detection approach

arXiv:2604.06265v2 Announce Type: replace Abstract: Quantum-inspired tensor networks algorithms have shown to be effective and efficient models for machine learning tasks, including anomaly detection. Here, we propose a highly parallelizable quantum-inspired approach which we call SMT-AD from Superposition of Multiresolution Tensors for Anomaly Detection. It is based upon the superposition of bond-dimension-1 matrix product operators to transform the input data with Fourier-assisted feature embedding, where the number of learnable parameters grows linearly with feature size, embedding resolutions, and the number of additional components in the matrix product operators structure. We demonstrate successful anomaly detection when applied to standard datasets, including credit card transactions, and find that, even with minimal configurations, it achieves competitive performance against established anomaly detection baselines. Furthermore, it provides a straightforward way to reduce the weight of the model and even improve the performance by highlighting the most relevant input features.

06.
medRxiv (Medicine) 2026-06-22

Integration of lung tissue proteomics and genome-wide association data to identify lung cancer susceptibility proteins and potential drug targets

Background: Proteins directly impact disease development and act as drug targets. Therefore, we integrated genomic and lung tissue proteomics data to identify lung cancer susceptibility proteins, elucidating genetic mechanisms and candidate drug targets. Method: We profiled the proteome and genome in non-neoplastic lung tissue from 200 lung cancer patients. Using this data, we constructed genetic models to predict abundance across the proteome in lung tissue. We applied these models to genome-wide association study (GWAS) data from 55,174 lung cancer cases and 1,294,174 controls to evaluate their associations with the risk of lung cancer, overall and by major histological subtypes. Bayesian colocalization and Mendelian randomization (MR) analyses were used to prioritize putative causal proteins, which were cross-referenced with three main drug-protein databases to identify potential therapeutic targets. Results: We identified 29 proteins associated with lung cancer risk at a false discovery rate < 5%, including 25 for overall lung cancer, two (AQP3 and IL18) specifically for adenocarcinoma, and another two (HMGN2 and HLA-DMB) for squamous cell carcinoma. Of them, genes encoding 17 proteins reside at least 2Mb away from any known GWAS risk loci, including 14 for overall lung cancer (HYI, GPX1, GMPPB, DSP, HDDC2, MTCH2, SUOX, JMJD7, PDIA3, IL16, IQGAP1, SULT1A2, ARHGAP27, and TYMP) and three for subtypes (AQP3, IL18, and HMGN2). Among the 12 proteins located within the known risk loci, EPHX2, CLDN18, PSMD5, and CYP2S1 proteins showed an association independent of the proximal GWAS-identified lead variant. Colocalization and/or MR analysis suggested 11 potential causal proteins. Five of these candidate causal proteins (DSP, CLDN18, IQGAP1, IL18 and TYMP) are targeted by nine drugs already approved by the FDA or in phase III trials. Conclusion: Our study identified novel lung cancer susceptibility proteins and potential drug targets, offering valuable insights into lung cancer biology and future translational utilities.

07.
arXiv (CS.LG) 2026-06-18

Unlocking air traffic flow prediction through microscopic aircraft-state modeling

arXiv:2605.10083v2 Announce Type: replace Abstract: Short-term air traffic flow prediction in terminal airspace is essential for proactive air traffic management. Existing approaches predominantly model traffic flow as aggregated time series. However, traffic dynamics are governed by aircraft states and their interactions in continuous airspace. Such aggregation obscures fine-grained information, including aircraft kinematics, boundary interactions, and control intent. Here we present AeroSense, a state-to-flow modeling paradigm that predicts future traffic flow directly from instantaneous airspace situations represented as dynamic sets of aircraft states derived from ADS-B trajectories. By establishing an end-to-end mapping from microscopic aircraft states to future regional traffic flow, AeroSense preserves aircraft-level dynamics while naturally accommodating varying traffic density without relying on historical look-back windows. Experiments on a large-scale real-world dataset show that AeroSense exhibits admirable predictive accuracy and robustness over aggregation-based forecasting approaches, particularly during high-density traffic periods. These findings suggest that aircraft-state situation modeling provides a promising alternative to conventional time-series forecasting in air traffic flow management.

08.
arXiv (CS.AI) 2026-06-12

Examining the Usage of Generative AI Models in Student Learning Activities for Software Programming

arXiv:2511.13271v2 Announce Type: replace-cross Abstract: The rise of Generative AI (GenAI) tools like ChatGPT has created new opportunities and challenges for computing education. Existing research has primarily focused on GenAI's ability to complete educational tasks and its impact on student performance, often overlooking its effects on knowledge gains. In this study, we investigate how GenAI assistance compares to conventional online resources in supporting knowledge gains across different proficiency levels. We conducted a controlled user experiment with 24 undergraduate students of two different levels of programming experience (beginner, intermediate) to examine how students interact with ChatGPT while solving programming tasks. We analyzed task performance, conceptual understanding, and interaction behaviors. Our findings reveal that generating complete solutions with GenAI significantly improves task performance, especially for beginners, but does not consistently result in knowledge gains. Importantly, usage strategies differ by experience: beginners tend to rely heavily on GenAI toward task completion often without knowledge gain in the process, while intermediates adopt more selective approaches. We find that both over-reliance and minimal use result in weaker knowledge gains overall. Based on our results, we call on students and educators to adopt GenAI as a learning rather than a problem solving tool. Our study highlights the urgent need for guidance when integrating GenAI into programming education to foster deeper understanding.

09.
arXiv (CS.AI) 2026-06-17

ParkingTransformer: LLM-Enhanced End-to-End Trajectory Planning for Autonomous Parking

arXiv:2606.17082v1 Announce Type: cross Abstract: End-to-end autonomous parking has emerged as a critical task within the realm of autonomous driving. However, existing methods suffer from black-box characteristics, lacking high-level semantic understanding and interpretability, which impedes the realization of seamless long-distance autonomous parking from the road to the target spot. To address these limitations, we propose ParkingTransformer, a novel framework that leverages multi-view perception and the scene understanding capability of Large Language Models (LLMs). By combining trajectory queries with LLMs implicit state features, our method interacts directly with historical information and raw sensor data to output planning trajectories, eliminating the need for dense Bird's-View (BEV) representations. To compensate for the inadequate spatial reasoning ability of LLMs, we introduce 3D positional encoding to explicitly inject spatial geometric awareness. Furthermore, a fixed-window streaming mechanism is designed for historical information processing, significantly improving long-term temporal processing efficiency and inference speed. Additionally, a coarse-to-fine decoding strategy is employed to progressively enhance trajectory precision. Extensive closed-loop experiments are conducted on the CARLA simulator and real-world vehicle platforms. The results demonstrate that our method achieves a driving score of 61.32 in CARLA simulator and an average success rate of 88.70% in real-world experiments, validating the feasibility and effectiveness of the proposed algorithms.

10.
arXiv (CS.CV) 2026-06-11

Performance Analysis of YOLOv11 and YOLOv8 for Mixed Traffic Object Detection under Adverse Weather Conditions in Developing Countries

In modern vehicular systems, robust performance under harsh conditions has become a critical problem of autonomous driving. Our study delivers a comprehensive evaluation of the newest iteration of the YOLO series, which is YOLOv11 Nano architecture benchmarked against the widely adopted YOLOv8 Nano as a baseline on a custom fused dataset that combines the Indian Driving Dataset (IDD) [1] and Berkeley Deep Drive Dataset (BDD100K) [2]. We have analyzed the trade-offs among detection accuracy, inference speed, and computational efficiency in high-entropy scenarios involving dense mixed traffic, rain, and low-light conditions. Specifically, YOLOv11n achieves a mean Average Precision (mAP@50) of 46.6%, with a notable 3.2% improvement in Precision over the baseline, effectively reducing false positives in cluttered scenes. Furthermore, the proposed model exhibits enhanced energy efficiency, requiring 22% fewer FLOPs (6.3G vs. 8.1G) while maintaining real-time inference speed of 70.9 FPS on a Tesla T4 GPU, offering an optimal trade-off for safety-critical edge deployment.

11.
arXiv (CS.AI) 2026-06-19

CADBench: A Multimodal Benchmark for AI-Assisted CAD Program Generation

arXiv:2605.10873v2 Announce Type: replace-cross Abstract: Recovering editable CAD programs from images or 3D observations is central to AI-assisted design, but progress is difficult to measure because existing evaluations are fragmented across datasets, modalities, and metrics. We introduce CADBench, a unified benchmark for multimodal CAD program generation. CADBench contains 18,000 evaluation samples spanning six benchmark families derived from DeepCAD, Fusion 360, ABC, MCB, and Objaverse; five input modalities including clean meshes, noisy meshes, single-view renders, photorealistic renders, and multi-view renders; and six metrics covering geometric fidelity, executability, and program compactness. STEP-based families are stratified by B-rep face count and all families are diversity-sampled to support controlled analysis across complexity and object variation. We benchmark eleven CAD-specialized and general-purpose vision-language systems, generating more than 1.4 million CAD programs. Under idealized inputs, specialized mesh-to-CAD models substantially outperform code-generating VLMs, which remain far from reliable CAD program reconstruction. CADBench further reveals three recurring failure modes: reconstruction quality degrades with geometric complexity, CAD-specialized models can be brittle under modality shift, and model rankings change across metrics. Together, these results position CADBench as a diagnostic testbed for measuring progress in editable 3D reconstruction and multimodal CAD understanding. The benchmark is publicly available at https://github.com/anniedoris/CADBench.

12.
arXiv (math.PR) 2026-06-18

On a class of reflected McKean-Vlasov Stochastic Differential Equations with jumps

arXiv:2606.18433v1 Announce Type: new Abstract: This paper investigates a class of reflected McKean-Vlasov Stochastic Differential Equations driven by both Brownian motion and a compensated Poisson random measure. We establish the existence and uniqueness of solutions and provide moments estimates for the state processes.

13.
arXiv (CS.LG) 2026-06-19

A Unified Perspective on the Dynamics of Deep Transformers

arXiv:2501.18322v2 Announce Type: replace Abstract: Transformers, which are state-of-the-art in most machine learning tasks, represent the data as sequences of vectors called tokens. This representation is then exploited by the attention function, which learns dependencies between tokens and is key to the success of Transformers. However, the iterative application of attention across layers induces complex dynamics that remain to be fully understood. To analyze these dynamics, we identify each input sequence with a probability measure and model its evolution as a Vlasov equation called Transformer PDE, whose velocity field is non-linear in the probability measure. Our first set of contributions focuses on compactly supported initial data. We show the Transformer PDE is well-posed and is the mean-field limit of an interacting particle system, thus generalizing and extending previous analysis to several variants of self-attention: multi-head attention, L2 attention, Sinkhorn attention, Sigmoid attention, and masked attention–leveraging a conditional Wasserstein framework. In a second set of contributions, we are the first to study non-compactly supported initial conditions, by focusing on Gaussian initial data. Again for different types of attention, we show that the Transformer PDE preserves the space of Gaussian measures, which allows us to analyze the Gaussian case theoretically and numerically to identify typical behaviors. This Gaussian analysis captures the evolution of data anisotropy through a deep Transformer. In particular, we highlight a clustering phenomenon that parallels previous results in the non-normalized discrete case.

14.
arXiv (quant-ph) 2026-06-16

Experimental Observation of Dynamical Phase Transitions in a Dephased Photonic Quantum Walk

arXiv:2606.15935v1 Announce Type: new Abstract: Dynamical phase transitions in open quantum systems govern how non-equilibrium states relax toward a stationary state. We study these transitions experimentally using a discrete-time photonic quantum walk on a three-node graph. A tunable synthetic gauge flux and calibrated dephasing allow us to control time-reversal symmetry and the detailed balance properties of the effective Markovian dynamics. With detailed balance, we observe a first-order dynamical phase transition marked by a crossing of real Liouvillian eigenvalues. When detailed balance is broken, we observe a second-order dynamical phase transition at an exceptional point where eigenvalues and eigenvectors coalesce. By progressively reducing the dephasing strength, we track the crossover toward the quantum-coherent regime and determine that the transitions persist down to a finite threshold. Our results link Liouvillian spectral topology to relaxation criticality and demonstrate a controllable platform for engineered dissipative dynamics.

15.
arXiv (CS.CL) 2026-06-15

GitOfThoughts: Version-Controlled Reasoning and Agent Memory You Can Replay, Diff, and Merge

Large language model (LLM) reasoning is ephemeral: chains of thought vanish with the context window, pruned search branches leave no record, and memory buffers cannot be diffed, merged, or audited. Every other complex software process (code, infrastructure, data, experiments) is version-controlled; reasoning is not. We introduce GitOfThoughts, which stores an agent's reasoning tree as a git repository: every scored thought is a commit, scores are notes, outcomes are tags, and retrieval is "git log" over the agent's own history. This makes reasoning replayable, auditable, and mergeable across agents at near-zero engineering cost. We then ask the harder question: does memory, in any substrate, actually improve accuracy? Across five substrates (none, markdown, vector, graph, git), two benchmarks, two model scales, and pre-registered replications, the answer for novel problems is no. No memory format reliably helps, and a promising early result collapsed under its own pre-registered replication. Memory pays only above what we call the copyability threshold: when the retrieved case is a near-duplicate of the current problem (similarity >~ 0.8), accuracy jumps sharply; below it, nothing. The gain is answer retrieval, not method transfer: a 4.5x larger model doubles the near-duplicate payoff yet still cannot extract a transferable method from a worked example. The only general lever we find is test-time sampling. The case for git-as-substrate is therefore auditability, provenance, and mergeability at accuracy parity. We document a retracted result and a refuted hypothesis to model the evaluation standard we hold ourselves to.

16.
arXiv (math.PR) 2026-06-16

Scaling Limits of Bivariate Nearly-Unstable Hawkes Processes and Applications to Rough Volatility

arXiv:2605.03703v3 Announce Type: replace Abstract: We study a pair of nearly-unstable Hawkes processes coupled through a one-directional, or triangular, cross-excitation: the first component evolves autonomously and excites the second, but not conversely. Each component is self-exciting through a heavy-tailed memory kernel, and the two kernels are allowed to have different tail indices, so that the limiting components exhibit genuinely different degrees of roughness. As the system approaches criticality, we prove that the suitably rescaled intensity vector converges weakly to the unique solution of a coupled system of stochastic Volterra equations of rough-volatility type. The first limiting component is autonomous, while the second is driven both by its own noise and by an inherited noise transmitted from the first component through an effective cross-kernel. This cross-kernel is the convolution of the two limiting Mittag-Leffler kernels and therefore combines the two memory structures. As a consequence, we obtain a short-time cross-decorrelation law: although the two components are coupled, their functional correlation vanishes at small time scales at an explicit polynomial rate. This time-dependent correlation distinguishes the limit from independent rough processes and from classical bivariate rough models with constant Brownian correlation.

17.
arXiv (quant-ph) 2026-06-12

Approximability limits for bounded-degree max-LINSAT and implications for decoded quantum interferometry

arXiv:2606.13570v1 Announce Type: new Abstract: For general max-k-XORSAT with $k \geq 3$, no polynomial-time algorithm can do substantially better than random guessing on worst-case instances unless $\mathsf{P} = \mathsf{NP}$: approximating beyond the random-assignment value of $1/2$ is $\mathsf{NP}$-hard. The picture changes when each variable appears in at most $D$ constraints. In that bounded-degree setting, polynomial-time algorithms can provably beat the random baseline by an additive amount of order $1/\sqrt{D}$. For Boolean instances, this scaling is known to be optimal: the matching hardness result is due to Trevisan, while the corresponding algorithmic guarantee was established by Barak et al. Whether the same holds over general finite fields, and what it implies for quantum algorithms, has not been established. We make this connection explicit and extend the hardness to max-E$k$-LINSAT$(q,r)$ with bounded degree $D$ and over arbitrary finite fields $\mathbb{F}_q$, proving that it is $\mathsf{NP}$-hard to exceed $r/q + \mathcal{O}_{q,r}(1/\sqrt{D})$. These results provide the complexity-theoretic benchmark for the bounded-degree instances targeted by decoded quantum interferometry (DQI), QAOA, and classical heuristics. Any quantum advantage on bounded-degree instances is therefore confined to the constant prefactor. We further show that in the context of DQI and on $(k,D)$-regular instances, this prefactor is sensitive to the nature of the decoder: DQI with classical decoders faces an information-theoretic $1/\sqrt{D \log D}$ barrier that prevents it from matching the hardness scaling, while DQI with quantum decoders is compatible with the $1/\sqrt{D}$ scaling – identifying quantum decoding as the key ingredient for matching the complexity-theoretic scaling with DQI.

18.
arXiv (CS.CL) 2026-06-18

Dango: A Strictly L1-Only Large Language Model for Studying Second Language Acquisition

We introduce Dango, a 1.8B-parameter large language model designed for controlled studies of L1-to-L2 (Japanese-to-English) transfer in second language acquisition (SLA). While previous studies have explored SLA in language models, they have predominantly relied on smaller or non-decoder models, limiting their ability to generate open-ended text and reducing their suitability as practical L2 simulators. We identify a key challenge when scaling models to this size: L2 contamination within the "monolingual" pretraining corpus used for L1 acquisition. To address this, we propose a filtering method to reduce premature exposure to English while preserving realistic, minimal exposure. We then fine-tune the model on LLM-generated L2-learning lessons to simulate the L2 acquisition process. Our evaluations confirm that Dango develops human-like L2 production patterns, outperforming both unfiltered and standard multilingual baselines. We release the model, data, and code to facilitate reproducible computational SLA research and learner-facing applications.

19.
arXiv (CS.LG) 2026-06-19

Alzheimer's Disease Diagnosis using a Multimodal Approach with 3D MRI and PET

arXiv:2606.20037v1 Announce Type: new Abstract: Alzheimer's disease (AD) is an irreversible neurodegenerative disorder and a leading cause of death worldwide. Early diagnosis plays an important part especially at the Mild Cognitive Impairment stage, where timely intervention can help slow its progression before it advances to AD. Neuroimaging data, like Magnetic Resonance Imaging (MRI) and Positron Emission Tomography (PET) scans, can help detect brain changes early by providing structural and functional brain changes related to the disease. Yet, many multimodal models still fuse MRI and PET with static concatenation and apply identical computation to all subjects, which limits robustness to patient/site heterogeneity and can waste computation. To address these limitations, we present the first study of combining 3D convolutional feature extractors with three fusion strategies - concatenation, Gated Multimodal Unit (GMU), and gated self-attention - and a sparsely gated Mixture-of-Experts (MoE) classifier that performs input-adaptive routing, activating only the most informative experts per case. Finally, we utilize Grad-CAM to visualize disease-related regions, ensuring model interpretability. Experiments are performed across three binary classification tasks (NC vs. MCI, MCI vs. AD, and NC vs. AD). Results show that GMU achieves accuracies of 80.46 % (NC vs. MCI) and 95.47 % (NC vs. AD), while gated self-attention attains 82.08 % on MCI vs. AD. Ablations show that removing the MoE consistently degrades accuracy across all tasks. These findings underscore the value of input-adaptive, multimodal modeling for AD diagnosis by leveraging the complementary nature of MRI and PET.

20.
Nature (Science) 2026-06-19

Daily briefing: Human detritus remakes geology

作者:

What, exactly, is a rock? Plus, a stem-cell success for a severe autoimmune disease and evidence that ‘AI deskilling’ is real. Researchers have tracked the electrical activity of individual brain cells during conversation in real time. Plus, the history of GPS and a cross-species transplant that could reveal clues about the origin of animals.

21.
arXiv (CS.AI) 2026-06-16

Edit Knowledge, Not Just Facts via Multi-Step Reasoning over Background Stories

arXiv:2602.02028v2 Announce Type: replace Abstract: Enabling artificial intelligence systems, particularly large language models, to update knowledge and flexibly apply it during reasoning remains a central challenge. Existing knowledge editing approaches emphasize atomic facts, improving factual recall but often failing to integrate updated information into a coherent framework usable across contexts. In this work, we argue that knowledge update is fundamentally a reasoning problem rather than a memorization problem. Consequently, a model should be trained in situations where the new information is instrumental to solving a task, combined with pre-existing knowledge, and exercised through multi-step reasoning. Based on this insight, we propose a training strategy based on three principles. First, new knowledge is introduced as a coherent background story that contextualizes novel facts and explains their relation to existing knowledge. Second, models are trained using self-generated multi-hop questions that require multi-step reasoning involving the new information. Third, training is done using knowledge distillation, forcing a student model to internalize the teacher's reasoning behavior without access to the novel information. Experiments show that models trained with this strategy effectively leverage newly acquired knowledge during reasoning and achieve remarkable performance on challenging questions that require combining multiple new facts.

22.
arXiv (CS.CV) 2026-06-12

Context-Aware Feature-Fusion for Co-occurring Object Detection in Autonomous Driving

Object detection in autonomous driving requires precise localization and an inherent understanding of the relational context between co-occurring objects. In extremely complex heterogeneous environments rare classes, small-scale objects, and frequently appearing objects are difficult for standard object detection frameworks to handle. In this paper, we propose a novel framework called Context-Centric Feature Fusion (CCFF), which utilizes two attention-based modules, Local Context Fusion Module (LCFM) uses the RoI-to-RoI self-attention mechanism to resolve spatial interactions, mainly considering small and partially obscured objects, while Global Context Attention Module (GCAM) converts the co-occurrence of objects priors by pooling top-K RoI features into a global context attention token, avoiding the computational overhead of pixel-level global pooling. This fusion of local and object-centric global features yields contextualized embeddings that enhance classification results and co-occurring objects detection. Our method is evaluated on two datasets, Cityscapes and BDD100K which demonstrate significant improvement on relational consistency, achieving a Category-level Consistency Strategy (CCS) of 0.973 and 0.969, respectively. Furthermore, our approach produces substantial gains in small object detection (AP_S: 14.1%) and successfully recovers rare classes such as "Train" that are typically lost in large distributions. Our efficiency report shows that the framework processes images in real time with a 0.2 FPS overhead. The code is available at https://github.com/BinayKSingh/CCFF.

24.
arXiv (quant-ph) 2026-06-19

Entanglement Scaling and Problem Structure in Quantum Approximate and Adiabatic Optimization Algorithms

arXiv:2606.19502v1 Announce Type: new Abstract: Entanglement is widely regarded as a key resource underlying the power of quantum algorithms and their potential to achieve quantum advantage. With the emergence of variational quantum algorithms, however, questions have arisen regarding how entanglement relates to problem structure and algorithmic performance in near-term quantum applications. Here, we examine this relationship through the Quantum Approximate Optimization Algorithm (QAOA), a specific class of variational algorithms, applied to the MaxCut problem. We show that suboptimal variational parameter training can significantly modify the observed entanglement profile, obscuring its scaling behavior. By employing a high-performance optimizer, we find empirical evidence that QAOA exhibits entanglement scaling consistent with that of fermionic Gaussian states (up to a scaling factor) across a broad range of MaxCut instances. We further compare these results with adiabatic quantum computation, observing annealing-schedule-dependent entanglement profiles whose scaling behavior differs markedly from that of QAOA. Together, these findings provide new insight into how entanglement manifests in and distinguishes these two algorithmic paradigms, highlighting its connection to both computational performance and application structure.

25.
arXiv (CS.CV) 2026-06-18

Physics in 2-Steps: Locking Motion Priors Before Visual Refinement Erases Them

Image-to-Video diffusion models leverage input images to generate visually stunning content, yet frequently produce motion that violates physical laws. We reveal a surprising finding: a 2-step generation often exhibits better physical consistency than a 50-step output from the same model. Through spectral analysis, we trace this to phase erosion during denoising; the phase degrades significantly (dropping by $\approx 18\%$ from step 2 to step 50), whereas the magnitude remains relatively stable. Building on this insight, we propose PhaseLock, a training-free framework that preserves the valid motion priors from few-step inference throughout the denoising trajectory. Rather than relying on full-step inference for physical consistency, PhaseLock extracts a motion prior from just 2 steps and enforces it onto high-fidelity generation via Latent Delta Guidance. Our approach effectively mitigates phase degradation, improving physical consistency by an average of 6.2 points across diverse models while largely maintaining visual fidelity, with negligible overhead ($1.06\times$ time, $1.02\times$ memory) and reduced reliance on expensive external guidance methods ($\sim5\times$ time). Project Page: https://dnwjddl.github.io/phaselock