Academic Intelligence · Curated Daily

Explore the Frontier of Global Academia

AcademicHub aggregates real-time literature from top journals and preprint platforms. Build your personal research radar and let large language models compile cross-disciplinary analysis briefings automatically.

01.
arXiv (CS.LG) 2026-06-11

Spectrally Regularized Latent Flow Matching for Turbulence Generation

arXiv:2606.11691v1 Announce Type: new Abstract: Latent diffusion and flow matching have emerged as leading approaches for synthetic turbulence generation, yet they systematically under-represent dissipation-range amplitudes. We introduce a latent flow matching framework with a spectrally regularized compression stage that directly targets this failure mode. On a 256^2 DNS dataset at Re_f \approx 2250, replacing an MSE-trained VAE with a zone-weighted log-spectral objective raises deep-dissipation retained spectral power from 25% to 94% in reconstruction and from 20% to 79% in unconditional generation. The improved latent representation also yields a substantially better sampling cost-fidelity tradeoff: the MSE-trained latent space imposes a fundamental quality ceiling near DD bias -0.70 that no integrator or step-count can overcome, while the spectrally regularized latent space reaches DD bias -0.117 at just 20 function evaluations. Mechanistically, encoder-decoder swap experiments show that the improvement is driven primarily by encoder-induced latent reorganization rather than decoder capacity, while a support-amplitude decomposition reveals that MSE-trained models behave as conservative suppression models, minimizing pointwise error by attenuating intermittent high-wavenumber structure. Both pipelines recover the second-order structure function and the correct sign of S_3, indicating the correct cascade direction without explicit supervision. A small residual gap in the magnitude of S_3 suggests that phase-coherent triadic organization remains a complementary axis to amplitude fidelity for future generative turbulence models.

02.
arXiv (CS.CV) 2026-06-11

CFCamo: A Counterfactual Detect-or-Abstain Framework for Camouflaged Object Detection

Vision-language reinforcement learning has recently shown strong target-present localization for camouflaged object detection (COD). Yet localization is only one side of the decision: when the agent faces an ordinary image with no camouflaged target, will it still claim that a camouflaged object exists? Standard COD training and evaluation data are positive-only, so agents optimized under this setting can acquire an over-detect bias, a task-specific form of object hallucination that standard COD evaluation leaves unmeasured. To quantify this target-absent behavior, we construct Counterfactual COD (CF-COD), a paired benchmark that removes the camouflaged target from each held-out COD evaluation image while preserving a plausible background. CF-COD evaluates whether a model detects the target on the original image and abstains on the target-absent counterfactual, summarized by Pair Accuracy (PA). We further introduce CFCamo, a paired counterfactual framework for COD with abstention. For training, CFCamo optimizes a Qwen3-VL-4B-Instruct agent with Counterfactual Sequence Policy Optimization (CSPO), which samples paired original-counterfactual rollouts and uses a Counterfactual Paired Reward (CPR) to couple original-image detection with counterfactual abstention. On CAMO-test, CFCamo improves S_alpha by +3.7 pp over the prior RL-based COD baseline; across CF-COD, it reaches 80.0-90.8% PA. Ablations show that removing counterfactual coupling reduces PA to 1.4-5.2% despite strong target-present COD scores, showing that target-present evaluation alone does not characterize detect-or-abstain behavior. Overall, these results indicate that CFCamo improves COD agents by coupling target-present detection with target-absent abstention, rather than merely strengthening target-present localization. Code and data are available at https://github.com/suhang2000/CFCamo.

03.
arXiv (CS.CV) 2026-06-19

3D Scene Graphs: Open Challenges and Future Directions

3D Scene Graphs (3DSGs) have emerged as a powerful representation for spatial AI by combining geometric grounding with semantic and relational abstractions of the environment. Their expressiveness has made them relevant to a broad range of problems in robotics and computer vision, including manipulation, navigation, task planning, scene understanding, and many others. However, the field remains fragmented: different communities adopt distinct formulations, construction pipelines, and evaluation protocols, making it difficult to compare methods, identify common assumptions, and assess remaining challenges for robust real-world deployment. This survey provides a unified and critical review of 3DSGs, with particular emphasis on open challenges and future directions. We first formalize 3DSGs under a common definition and analyze the principal modeling choices that characterize existing formulations, including node and edge attributes, hierarchical structure, dynamic scene representations, and affordance-aware extensions. We then review how 3DSGs are built from raw sensory observations, discussing the most common terminologies, conventions, and techniques. Finally, we examine downstream applications and evaluation strategies, from intrinsic graph quality to task-level performance. To support the community, we also provide a dedicated website that organizes and extends the surveyed content, accessible at https://3dscenegraphs.com/.

04.
arXiv (CS.LG) 2026-06-15

PostDeg: Placement Beats Parameterization in LayerNorm GNNs

arXiv:2606.14022v1 Announce Type: new Abstract: LayerNorm-based GNNs routinely erase the topology signals (degree, centrality, $k$-core) that node-selection policies should depend on, but the literature has not located where in the residual block the erasure happens. We answer that question: a positive per-node scalar inserted before LayerNorm is divided out up to a stabilizer term, while the same scalar inserted after LayerNorm reaches the score head as representation magnitude. The surviving slot is the post-LayerNorm position. We instantiate it with PostDeg, a parameter-free post-LayerNorm inverse-degree scale, and pre-register four falsifiers (graphwise scalars, extra LayerNorm, expressive same-slot capacity, backbone-agnostic source) that would reject the rule. PostDeg gains $+3.5\%/+2.5\%/+5.6\%$ over the LN backbone on influence maximization, network dismantling, and maximum independent set, with $10/10$ paired-seed wins per task; none of the four falsifiers fires. The takeaway is that placement, not parameterization, carries the gain – a small invariance check that generalizes to any positive topology scalar in any normalized residual stack.

05.
arXiv (CS.CL) 2026-06-12

HyPE: Category-Aware Hypergraph Encoding with Persistent Edge Embeddings for Persona-Grounded Dialogue

Persona-grounded dialogue systems aim to produce responses consistent with a speaker's persona, yet existing methods treat personas as a flat set of sentences and fail to model the high-order relations among persona attributes-e.g., that several persona sentences share a topical category. We propose HyPE (Hypergraph Persona Encoder), a framework that (i) analyzes each persona-bearing text as a (Core, Expression, Sentiment, Category) quadruple, and (ii) organizes persona elements into a hypergraph whose hyperedges are induced by shared category labels. An HyperGCN hypergraph neural network propagates this structure into a persona summary vector and a soft-memory bank that condition the response generator. We further propose Persistent Edge Embeddings (PEE), lightweight per-category learnable priors fused into the HyperGCN message-passing step. On PersonaChat under greedy decoding, HyPE consistently outperforms sentence-level pooling baselines across GPT-2, LLaMA-3.2-3B, and Qwen2.5-3B backbones by demonstrating that structured hyperedge-level persona encoding provides a transferable advantage across model scales.

06.
arXiv (CS.AI) 2026-06-12

CRAFTIIF: Cross-Resolution Analytic Four-Type Interpretable Isolation Forest for Multivariate Time Series Anomaly Detection

Authors:

arXiv:2606.13486v1 Announce Type: cross Abstract: Anomaly detection in multivariate time series is challenged by four structurally distinct anomaly types – point (isolated spikes), distributional (level shifts), temporal (rhythm changes), and collective (inter-sensor correlation breakdowns) – each requiring different feature representations. Most unsupervised methods target only one or two types and provide limited interpretability. We present CRAFTIIF (Cross-Resolution Analytic Four-Type Interpretable Isolation Forest), a fully unsupervised framework targeting all four types without dataset-specific tuning. CRAFTIIF generates K=500 random analytic wavelet feature draws across four families (Morlet, DOG, Haar, Coiflet), each targeting a specific anomaly type, feeding five structured Isolation Forests – one per type plus a meta-IF for compound anomalies. An adaptive Otsu/MAD threshold calibrates detection automatically across anomaly rates from 0.1% to 69.2%. Because each IF is trained exclusively on type-specific features, branch firing provides direct anomaly-type attribution by construction, without post-hoc explanation. Evaluated on all 19 datasets of the mTSBench benchmark (Zhou et al., TMLR 2026), CRAFTIIF achieves mean F1=0.228 (all 19 datasets) and F1=0.322 (13 detectable datasets), ranking first among all 25 evaluated methods on VUS-PR (0.463 vs. previous best 0.329, +40.7%). A diagnostic framework – oracle F1, detectability limits, and branch separation ratios – identifies 6 of 19 datasets as fundamentally undetectable by any unsupervised method. Ablation over 11 conditions confirms adaptive thresholding (+38% F1), four-branch structure (+20%), and meta-IF (+23%) are each essential. Code: https://github.com/smitswil/craftiif

07.
arXiv (CS.LG) 2026-06-16

Finite-Width Neural Tangent Kernels from Feynman Diagrams

arXiv:2508.11522v4 Announce Type: replace Abstract: Neural tangent kernels (NTKs) are a powerful tool for analyzing deep, non-linear neural networks. In the infinite-width limit, NTKs can easily be computed for most common architectures, yielding full analytic control over the training dynamics. However, at infinite width, important properties of training such as NTK evolution or feature learning are absent. Nevertheless, finite width effects can be included by computing corrections to the Gaussian statistics at infinite width. We introduce Feynman diagrams for computing finite-width corrections to NTK statistics. These dramatically simplify the necessary algebraic manipulations and enable the computation of layer-wise recursion relations for arbitrary statistics involving preactivations, NTKs and certain higher-derivative tensors (dNTK and ddNTK) required to predict the training dynamics at leading order. We demonstrate the feasibility of our framework by extending stability results for deep networks from preactivations to NTKs and proving the absence of finite-width corrections for scale-invariant nonlinearities such as ReLU on the diagonal of the Gram matrix of the NTK. We numerically implement the complete set of equations necessary to compute the first-order corrections for arbitrary inputs and demonstrate that the results follow the statistics of sampled neural networks for widths $n\gtrsim 20$.

08.
arXiv (CS.CV) 2026-06-18

Quantile Transfer for Reliable Operating Point Selection in Visual Place Recognition

Visual Place Recognition (VPR) is a key component for localisation in Global Navigation Satellite System (GNSS)-denied environments, but its performance critically depends on selecting an image matching threshold (operating point) that balances precision and recall. Thresholds are typically hand-tuned offline for a specific environment and fixed during deployment, leading to degraded performance under environmental change. We propose a method that automatically selects the operating point of a VPR system to maximise recall at 100% precision. The method uses a small calibration traversal with known correspondences and transfers thresholds to deployment via quantile normalisation of similarity score distributions. This quantile transfer ensures that thresholds remain stable across calibration sizes and query subsets. Experiments with seven state-of-the-art VPR techniques across five benchmark datasets demonstrate that our proposed approach consistently outperforms existing baselines, enabling the underlying VPR technique to operate at 100% precision in approximately twice as many deployment scenarios (median improvement), while retrieving up to 29% more correct matches at that precision. The method eliminates manual tuning by adapting to new environments and generalising across operating conditions. Our code is available at https://github.com/DhyeyR-007/Quantile-Transfer-for-Reliable-VPR.

09.
arXiv (CS.CV) 2026-06-19

Stitching and dimensionality effects on large artificially generated volume datasets

Generating large images via deep learning requires patching input data to accommodate hardware memory limitations, then assembling output patches, a process that can introduce stitching artifacts when neighboring patches do not align at borders. While these artifacts are known to affect segmentation tasks, their impact on generative models for style-transfer remains poorly understood. We investigated three stitching approaches and two patch dimensionalities (2D vs 3D) using cycleGAN models trained on cryo-electron microscopy datasets. We evaluated both perceptual quality and performance on downstream mitochondria segmentation. Our key findings reveal that: (1) FID scores fail to detect subtle stitching artifacts that significantly impact downstream segmentation performance, (2) 3D models with artifact-free stitching marginally outperform 2D models on downstream tasks, though the improvement barely justifies the computational cost, and (3) 2D models train more stably due to larger batch sizes. Additionally, we demonstrate that ensembling predictions from three orthogonal directions can improve low-quality volumes but provides no benefit for high-quality outputs. These results demonstrate that maximizing generative model performance on large scientific datasets requires careful consideration and mitigation of stitching artifacts, and that perceptual metrics alone are insufficient for evaluating domain adaptation quality in biomedical imaging.

10.
arXiv (CS.CL) 2026-06-11

Geometric Metrics and LLMs: What They Measure and When They Work

We present a systematic stress-test of geometric metrics for LLM evaluation. Rank-based geometric properties of internal representations have shown promise as reference-free quality signals, but the conditions under which they are reliable remain unclear. We evaluate eight commonly-used metrics: intrinsic-dimensionality estimators, spectral norms, and related quantities across six tester models (0.5-8B) and eight generators on contrasting tasks, separating genuine geometric signal from text-length effects and from what standard text statistics already capture. Three findings emerge. First, some metrics (notably Schatten Norm and MOM) mainly reflect output length, and their apparent discriminative power collapses once length is controlled. Second, geometric metrics add modest but real information beyond text statistics: combined with them, a classifier reaches 78% accuracy on 6-way generator identification versus 69% for text statistics alone. Third, rather than tracking a general notion of text quality, the metrics demonstrate only moderate association between the intrinsic-dimensionality and lexical diversity (RTTR). We give use-case-specific recommendations and identify failure detection as the most promising near-term application.

11.
arXiv (CS.AI) 2026-06-12

ToolSense: A Diagnostic Framework for Auditing Parametric Tool Knowledge in LLMs

arXiv:2606.12451v1 Announce Type: new Abstract: Large language models deployed as agents over large tool catalogs face a critical tool-retrieval bottleneck. As embedding-based retrieval approaches rely on compact encoders that may under-capture specialized tool semantics, parametric tool retrieval addresses this by encoding each tool as a virtual token appended to the LLM vocabulary, fine-tuned in two stages (memorization then retrieval SFT) to use the LLM as a retriever, achieving strong performance on standard ToolBench retrieval benchmarks. Yet these benchmarks use verbose, fully-specified queries, and their evaluation applies constrained decoding that restricts outputs to valid token paths, neither reveals whether the model actually understands its tools. We introduce ToolSense, an open-source LLM-powered diagnostic framework that takes any tool catalog as input and automatically generates three benchmarks: a Realistic Retrieval Benchmark (RRB) with queries at three ambiguity tiers, an MCQ probing benchmark, and a QA probing benchmark. Applying ToolSense to ToolBench (~47k tools) and evaluating five parametric model training configurations reveals a knowledge-retrieval dissociation: on RRB queries, several configurations collapse by ~50-64 percentage points compared to fully-specified ToolBench benchmarks, falling below the embedding-model baseline. Additionally, despite strong retrieval performance, some models score near-random on factual probes, suggesting a knowledge-retrieval dissociation. We open-source the ToolSense framework and the ToolBench diagnostic benchmarks at https://github.com/SAP/toolsense.

12.
arXiv (CS.LG) 2026-06-15

XRDiff: Crystal Structure Prediction from Powder X-Ray Diffraction Data Using Diffusion Models

arXiv:2606.14003v1 Announce Type: cross Abstract: Determining the crystal structure of a material from its powder X-ray diffraction (PXRD) pattern is a central challenge in materials science. PXRD is an accessible and widely used characterization technique, yet recovering the atomic structure from diffraction data requires solving an underdetermined inverse problem due to the loss of phase information. Generative modeling can provide a prior over atomic structure and learn the mapping from PXRD patterns to crystal structures via simulated structure-spectrum pairs. We present XRDiff, a diffusion model that recovers crystal structures from PXRD given either the stoichiometry or, in a more challenging setting, the elemental constituents and total number of atoms in the unit cell. We evaluate on datasets where each stoichiometry has multiple polymorphs and all polymorphs of a given composition are held out together, ensuring that high performance reflects genuine use of the diffraction signal. XRDiff achieves strong structure recovery rates on simulated benchmarks, indicating that the model learns a spectrum-to-structure mapping precise enough to differentiate between polymorphs. To address generalization to experimental data, we compare a full-spectrum encoding against an encoding based on peak descriptors. The peak-based encoding generalizes substantially better, outperforming even a model trained on full spectra with augmentations fitted to the experimental noise distribution. These results demonstrate that representations robust to the noise and artifacts present in real-world PXRD offer a practical and scalable path toward closing the simulation-to-experiment gap, enabling zero-shot crystal structure solution from experimental PXRD with full or partial chemical composition input.

13.
arXiv (CS.CL) 2026-06-15

SANA: What Matters for QA Agents over Massive Data Lakes?

Exploratory question answering (EQA) over data lakes requires an LLM agent to discover relevant sources, analyze retrieved data, and adapt its actions based on intermediate results. End-to-end accuracy alone cannot distinguish failures in search, planning, data analysis, or the agent's Action Policy: its decisions about what to do next and when to submit an answer. We present SANA (Search Agent Navigation Ablation framework), a diagnostic ablation framework that transforms EQA tasks into runtime profiles containing gold source sequence, sanitized subquestions, and execution records. SANA uses these profiles to construct idealized search, planning, and data-analysis tools, allowing each component to be ablated; the residual gap is diagnostic evidence for policy failures. To illustrate SANA as a reusable evaluation framework, we adapted two recent EQA benchmarks, LakeQA and KramaBench, and evaluated lightweight and mid-sized agents under fixed prompts, budgets, data lakes, and runtimes. Across both benchmarks, data analysis is a consistent bottleneck while planning is less so. Search is a major limitation in LakeQA's large data-lake setting, but less so for the smaller-scale KramaBench. SANA thus deconstructs end-to-end task accuracies into a diagnosis of where data-lake agents fail, and allows for systematic comparisons of progress in search, planning, data analysis, and agent design.

14.
arXiv (CS.CV) 2026-06-12

Stereo Vision-Based Fall Prediction and Detection using Human Pose Estimation on the AMD Kria K26 SOM

Background and Objective: Falls among elderly people can cause serious injury and reduce quality of life. Timely prediction and detection are essential to prevent harm and support well-being. We propose a portable, low-power, battery-operated, vision-based fall prediction and detection system using HPE on an AMD Kria K26 System-on-Module (SOM). The objective is a non-intrusive, privacy-preserving system for real-time fall detection. Methods: The system uses an Intel RealSense D455 range-sensing camera connected to the K26 SOM by USB. It captures synchronized RGB and depth frames, 640 x 480 x 3 and 640 x 480 pixels, at 60 FPS. The SOM runs a three-stage pipeline with quantized YOLOX, Anchor-to-Joint (A2J), and fall-detection models. YOLOX identifies human bounding boxes from RGB frames, then discards the RGB frames to preserve privacy. A2J uses depth frames to estimate 15 joint keypoints per person. A CNN uses selected joint coordinates (x, y, z) to classify fall activity. YOLOX was trained on CrowdHuman; A2J on ITOP, MP-3DHP, UR Fall Detection, and a custom SDSU PSG dataset; and the CNN on UR Fall Detection and SDSU PSG. The design used a single-core DPU with a serial pipeline and a dual-core DPU running YOLOX and A2J with multiple threads. Results: Quantized accuracy was evaluated using IoU >= 50% for YOLOX, mAP with a 10-cm rule for A2J, and classification accuracy, (TP + TN)/(TP + TN + FP + FN), for the CNN. Accuracies were 74%, 84.13%, and 75.85%. Throughput improved from 2.5 FPS for the single-threaded pipeline to 4.5 FPS for the multi-threaded version. Conclusion: Results demonstrate the feasibility of privacy-preserving fall detection on an AMD Kria K26 edge device. On-device HPE and fall classification runs without cloud dependency, supporting elderly monitoring and assistive healthcare. Future work will improve model accuracy and speed.

15.
arXiv (CS.LG) 2026-06-11

Last-Iterate Convergence of Optimistic Multiplicative Weight Update

arXiv:2606.11773v1 Announce Type: cross Abstract: Optimistic Gradient Descent Ascent (OGDA) and Optimistic Multiplicative-Weights Update (OMWU) are two very popular algorithms to solve convex/concave saddle-point problems, where OMWU is the non-Euclidean, entropic version of OGDA. It is known since the '80s that the last iterate of OGDA asymptotically converges to a saddle point in smooth problems. On the other hand, it is unknown if OMWU has the same property. In this paper, I show that OMWU converges asymptotically for smooth convex-concave saddle-point problems, with a small enough constant learning rate. The result does not require uniqueness, strict complementarity, an error bound, or initialization near a solution. The main new ingredient is a boundary argument showing that every cluster point satisfies the inactive-coordinate KKT inequalities. The boundary argument was discovered with assistance from ChatGPT and is documented in the appendix.

16.
arXiv (CS.AI) 2026-06-15

AI Receptivity or AI Adoption Breadth? A Tool-Specific Reanalysis of the Lower-Literacy/Higher-Usage Link

arXiv:2606.13734v1 Announce Type: new Abstract: Recent evidence reported by Tully, Longoni, and Appel (2025) suggests that lower artificial intelligence (AI) literacy predicts greater receptivity toward AI. We revisit this claim using the public data from Study 3 of that article, which measures past usage of five AI tool categories on a five-point frequency scale. We first reproduce the negative association between AI literacy and aggregate AI usage using OLS on participant-level averages, binary logit, ordered logit, and multinomial logit specifications. We then show that the aggregate relationship masks substantial heterogeneity by tool type. In our demographic-adjusted primary specification, AI literacy does not significantly predict text AI usage (ordered-logit $\beta$ = -0.090, p = .387), whereas it remains a strong predictor of non-text AI adoption ($\beta$ = -0.377, p < .001). The non-text effect is also robust under Tully et al.'s original Study 3 control specification ($\beta$ = -0.502, p < .001). Binary, ordered-logit, and multinomial specifications suggest that the non-text relationship is primarily an adoption/non-adoption pattern rather than evidence of intensive use: the demographic-adjusted odds ratio of ever having used a non-text AI tool is 0.68. Thus, in the study that measures self-reported past usage rather than stated preferences, the evidence does not support a simple claim that lower AI literacy predicts greater receptivity to AI in general. It points instead to a narrower pattern of broader adoption across lower-penetration, non-text AI tools.

17.
Nature (Science) 2026-06-08

Fifty years since a simple equation described the chaos of biology

An exploration of chaos theory in population dynamics showed that unpredictable systems can often be modelled using surprisingly simple mathematics. An exploration of chaos theory in population dynamics showed that unpredictable systems can often be modelled using surprisingly simple mathematics.

18.
arXiv (CS.CV) 2026-06-12

Budget-Constrained Step-Level Diffusion Caching

Step-level caching accelerates diffusion models by exploiting temporal redundancy across denoising steps. Existing methods make per-step cache decisions using threshold-based heuristics, without directly optimizing for final output quality. As a result, their inference latency varies across inputs and is difficult to control at deployment. In this work, we propose BudCache, which inverts this formulation: rather than letting per-step error thresholds dictate the runtime cost, we fix the compute budget in advance and search for the cache policy that best preserves the final output. To tackle the combinatorial complexity of step selection, we combine Simulated Annealing with deterministic Hill Climbing. This offline search identifies high-quality cache policies within minutes and introduces no online search or thresholding overhead during inference. When the compute budget is very tight, we further introduce cache-aware schedule alignment, which adapts the time discretization to the selected cache policy to reduce cache-induced trajectory mismatch. Experiments on FLUX.1-dev and Wan2.1 show that BudCache achieves better generation quality than heuristic caching baselines under the same inference budgets. Code is available at https://github.com/Westlake-AGI-Lab/BudCache

19.
arXiv (CS.AI) 2026-06-17

Explicit Context-Driven Neural Acoustic Modeling for High-Fidelity RIR Generation

arXiv:2509.15210v2 Announce Type: replace-cross Abstract: Realistic sound simulation plays a critical role in many applications. A key element in sound simulation is the room impulse response (RIR), which characterizes how sound propagates within a given space. Recent studies have applied neural implicit methods to learn RIR using context information collected from the environment, such as scene images. However, these approaches do not effectively leverage explicit geometric information from the environment. To further exploit neural implicit models with direct geometric features, we present MiNAF, which queries a rough room mesh at given locations and extracts distance distributions as an explicit representation of local context. Our approach demonstrates that incorporating explicit local geometric features can better guide the model in generating more accurate RIR predictions. Through comparisons with conventional and state-of-the-art methods, we show that MiNAF performs competitively across various evaluation metrics.

20.
bioRxiv (Bioinfo) 2026-06-17

AMaNITA: an end-to-end workflow for native tRNA nanopore sequencing data analysis

Transfer RNA (tRNA) molecules serve as essential adapters during protein translation. While direct RNA sequencing (DRS) via Oxford Nanopore Technologies has emerged as a powerful platform for systematic tRNAome profiling, we currently lack a simple and robust statistical framework for nanopore tRNA data analyses. Here, we address this gap by developing AMaNITA (Abundance, Modifications, and Nanopore Intensity Toolbox Application), an end-to-end bioinformatic workflow that enables simplified, robust, and scalable analyses of nanopore native tRNA sequencing datasets. AMaNITA streamlines the entire analytical trajectory: from upstream processing (basecalling, mapping, filtering, batch effect correction) to downstream assessment of differential tRNA abundance and modification stoichiometry. The workflow generates an interactive HTML report for data exploration and analysis, allowing the user to download the source data files and resulting plots. AMaNITA can be executed using Singularity from the command line, without requiring installation of dependencies.

21.
arXiv (quant-ph) 2026-06-15

Quantum gates with parametrically driven multi-qubit couplers

arXiv:2606.14522v1 Announce Type: new Abstract: Superconducting quantum processors could significantly profit from enhanced connectivity together with precise control of interactions and gates between qubits. Here we investigate plaquettes of four qubits that are coupled via a central tunable coupling circuit, so that not only gates between qubits connected by an edge of the plaquette can be executed but also between qubits across the diagonal. By numerically and analytically analyzing parametrically driven processes, we explore $\sqrt{iSWAP}$-gates between any pair of qubits, also across the diagonal, as well as three-qubit interactions and gates. For experimentally available circuit parameters, we for example find $\sqrt{iSWAP}$-gates with a gate time of 50 ns and 99.9\% fidelity, which is decreased to 99.4\% if two such gates are executed in parallel on disjoint qubit pairs in the plaquette. For three-qubit gates we find fidelities of 95\% fidelity at a gate time of 200 ns.

22.
arXiv (CS.LG) 2026-06-18

P$^2$CE: Model-Agnostic Plausible Pareto-Optimal Counterfactual Explanations

arXiv:2606.18418v1 Announce Type: new Abstract: The increasing use of machine learning algorithms in social applications has raised concerns about fairness and transparency, leading to the development of counterfactual explanations. These explanations supports individuals to understand and potentially alter unfavorable decisions in areas such as loan applications, job selections, and more, by providing actionable changes to input features that would lead to a desired outcome. Existing methods often struggle to balance feasibility, plausibility, and computational efficiency. To address this, we introduce P$^2$CE, an algorithm for generating plausible Pareto-optimal counterfactual explanations, offering users a diverse set of optimal trade-offs between different notions of feasibility. P$^2$CE employs an auxiliary isolation forest outlier detector to ensure that explanations are in accordance with the data distribution and leverages SHAP values to obtain optimal results with short computing times, regardless of the underlying model. Our algorithm was empirically evaluated on three datasets, demonstrating superior performance in terms of both solution quality and computational efficiency compared to related techniques.

23.
arXiv (CS.CV) 2026-06-18

RegimeVGGT: Layer-Wise Spatially Preserving Redundancy Removal for Visual Geometry Grounded Transformer

Visual Geometry Grounded Transformer (VGGT) recovers dense 3D scene structure from multi-view images in one forward pass, but quadratic cross-frame attention limits its scalability. Existing training-free accelerators reduce computation uniformly along one axis, missing layer heterogeneity. Our spectral, probing, and causal analyses reveal three regimes: shallow layers lack cross-view structure, middle layers drive cross-view alignment, and deep layers are redundant for dense geometry yet their cross-frame attention remains essential for pose. RegimeVGGT applies layer-wise U-shaped compression along two axes: Saliency-Guided Banded Merging protects geometry- and edge-salient tokens, while Selectively Protected K/V Downsampling preserves cross-frame spatial coverage and the pose-critical path through a phase-shifted spatial grid, a reference-frame anchor, and uncompressed camera/register tokens. Training-free, RegimeVGGT achieves a 6.7x speedup over VGGT* at matched reconstruction quality.

24.
arXiv (CS.LG) 2026-06-16

Bayesian Tensor Decomposition with Diffusion Model Prior

arXiv:2606.03212v2 Announce Type: replace Abstract: Low-rank tensor decomposition (TD) is usually effective on clean, fully observed data, but it often degrades under severe missingness or noise. Low-rankness is itself a useful but limited structural prior, and additional handcrafted priors (e.g., sparsity or smoothness) still fall short of capturing the rich statistics of real-world data. To compensate for this weak inductive bias under heavy corruption, one would like to inject a learned, data-driven prior; however, the state-of-the-art diffusion models are not readily compatible with current TD and tractable posterior inference. To address these challenges, we introduce DiffBCP, a hybrid-prior Bayesian CP decomposition framework that couples a cumulative shrinkage process prior over the CP factors for automatic rank selection with an off-the-shelf pre-trained diffusion model as an implicit data prior on the reconstructed tensor. To make posterior inference tractable despite the coupling among the likelihood, low-rank constraint, and diffusion prior, we develop a split Gibbs sampler: CP factors admit conjugate updates, while the diffusion block is sampled via low-rank-guided denoising. A noise-adaptive coupling schedule further reduces sensitivity to hand-tuned annealing. Experiments on image inpainting and denoising, including high-resolution out-of-distribution images, show consistent gains over Bayesian, nonlinear, and plug-and-play TD baselines.

25.
arXiv (CS.LG) 2026-06-15

Learning Variable-Length Tokenization for Generative Recommendation

arXiv:2605.17779v2 Announce Type: replace Abstract: Generative recommendation reformulates recommendation as next-token prediction over discrete semantic identifiers (IDs). A fundamental yet unexplored design choice is that existing methods employ fixed-length tokenization for all items, implicitly assuming uniform encoding capacity regardless of item characteristics. Through systematic experiments across four datasets, we discover the Popularity-Length Paradox: popular items achieve optimal performance with short IDs, while tail items require substantially longer codes to capture discriminative semantics. This reveals a critical mismatch where popular items benefit from abundant collaborative signals and require minimal semantic detail, whereas tail items must rely on fine-grained content features due to sparse interaction data. To address this, we propose VarLenRec, a framework for learning variable-length tokenization. We develop Popularity-Weighted Information Budget Allocation (PIBA), an information-theoretic framework proving that optimal ID length should scale as a negative power of popularity. Directly implementing variable-length allocation faces two technical challenges: standard Euclidean residual quantization lacks geometric capacity to support diverse code lengths without distortion, and discrete length decisions are non-differentiable. We address these through Hyperbolic Residual Quantization, which leverages the exponential volume growth of the Poincaré ball to naturally stratify encoding capacity, and a Soft Length Controller, which enables differentiable length prediction via continuous layer retention probabilities regularized by PIBA-derived priors. Extensive experiments demonstrate that VarLenRec achieves significant improvements over state-of-the-art methods in recommendation accuracy and training/inference efficiency, revealing the importance of adaptive encoding capacity in generative recommendation.