Academic Intelligence · Curated Daily

探索全球前沿学术脉络

AcademicHub 汇聚顶级期刊与预印本平台的实时文献。定制您的专属科研雷达,利用大语言模型自动生成交叉领域文献分析简报。

01.
arXiv (CS.CV) 2026-06-17

Attention Alignment Between Humans and Vision-Language Models

Visual perception depends on top-down goals and bottom-up sensory mechanisms. Vision-language models implement both, allowing us to treat each component as a separable hypothesis about what drives where we look. We compared spatial attention maps from six vision-language models against human fixation heatmaps recorded on 200 images during two tasks (general description and social captioning). The six models spanned a 2$\times$2 factorial of CNN vs.\ ViT encoders crossed with LSTM vs.\ Transformer decoders, plus Molmo 7B-D and Qwen3.5 9B. We found that both decoder and encoder architecture shaped alignment, but decoder choice dominated. LSTM vs.\ Transformer decoders increased alignment by 40–50 percentage points (80–87\% vs.\ 40–59\% of the human noise ceiling). In contrast, CNN vs.\ ViT encoders contributed a secondary 5–20 point advantage depending on decoder family, with CNN-LSTM the most aligned model overall (85–87\%). Despite their alignment advantage, LSTM-decoder attention maps were spatially diffuse and minimally task-differentiated; ViT-Transformer, the weakest in alignment, showed the sharpest spatial concentration and strongest task differentiation. A hemispatial-neglect simulation confirmed that ablating attention impacted LSTM decoders more than Transformer decoders. In an exploratory extension using TRIBE-simulated synthetic neural responses, fixation alignment and neural relevance dissociate: CNN-Transformer attention maps better predicted synthetic brain activity despite lower fixation alignment, with attention maps best predicting early visual cortex. Together, top-down and bottom-up components trade off what they predict in behavioral and synthetic neural data.

02.
arXiv (quant-ph) 2026-06-16

Comparative Performance Analysis of NIST PQC Standards: From STM32 Software Limitations to FPGA-SoC Acceleration

arXiv:2606.15744v1 Announce Type: new Abstract: The rapid advancement of quantum computing poses a significant threat to classical public-key cryptographic systems, necessitating the transition to Post-Quantum Cryptography (PQC). This study investigates the implementation challenges of NISTstandardized signature schemes on resource-constrained embedded hardware. We present a comparative analysis of SPHINCS+ and CRYSTALS-Dilithium on an ARM Cortex-M4 (STM32F407G) microcontroller. Our findings reveal that SPHINCS+ is practically unusable in this software-only environment, with impractical execution times. Furthermore, the reference Dilithium implementation failed to execute entirely on the MCU due to severe RAM and timing constraints. To overcome these hardware limitations, we integrated a hardware-accelerated Dilithium core onto a Xilinx Zynq-7000 ZedBoard SoC. By implementing a specialized Number Theoretic Transform (NTT) accelerator in the FPGA fabric, we achieved successful execution with performance rates for key generation and signature generation at millisecond levels. These results demonstrate that while pure software PQC is non-viable for standard microcontrollers, a hardware-software codesign approach provides the necessary efficiency for quantumresistant embedded systems.

03.
arXiv (CS.CV) 2026-06-16

Federated Medical Image Segmentation under Real-World Label Noise: A Benchmark Suite for Noisy Label Learning Method Selection

While federated learning (FL) enables collaborative medical image segmentation without centralizing sensitive data, real-world deployment is frequently complicated by cross-site label imperfections such as contour disagreement, missing or additional structures, and confused labels. Federated noisy label learning (FNLL) aims to mitigate these effects, yet remains underused in practice as existing evidence is largely based on synthetic noise, simplified settings, and limited real-world noisy evaluation. We address this gap by introducing a benchmark suite that combines diverse real-world noisy datasets, deployment-relevant client-noise scenarios, and label-noise-targeted evaluation to support systematic FNLL assessment and informed method selection. The suite combines curated real-world noisy medical image segmentation datasets from diverse sources with a comprehensive federated segmentation framework including various client-noise scenarios and noise-targeted evaluation. The presented suite provides a realistic and discriminative basis for FNLL evaluation in medical image segmentation and establishes a reusable foundation for fair benchmarking, dataset-specific label-noise characterization, and future method development under realistic federated settings. Code is available at https://github.com/MIC-DKFZ/FedSegNoiseBench.

04.
bioRxiv (Bioinfo) 2026-06-15

oxo-flow: compiled, memory-safe bioinformatics workflow orchestration

作者:

Bioinformatics analyses depend on workflow engines to coordinate dozens of computational tools across complex dependency chains. The most widely adopted engines-Snakemake, Nextflow, the Common Workflow Language (CWL), and the Workflow Description Language (WDL)-run on interpreted or just-in-time (JIT) compiled language runtimes, incurring hundreds of milliseconds of startup latency and providing no compile-time safety guarantees from the host language. We developed oxo-flow, a workflow engine written in Rust that compiles to a single native binary. On an Apple M5 processor, oxo-flow parses, validates, and dry-runs a production-scale workflow in roughly 22 milliseconds-before Snakemake or Nextflow have finished loading their runtime environments. Peak memory usage is 16 megabytes, representing six- to seven-fold reductions relative to Snakemake and Nextflow. Dry-run latency is essentially independent of workflow size: a hundred-fold increase in rule count adds approximately 0.4 milliseconds. oxo-flow integrates 31 command-line tools, a REST interface with 60 endpoints, an embedded web application, and native cluster submission into a single 10-megabyte binary. It provides per-rule environment isolation across seven backends, checkpoint-based fault tolerance with cryptographic output verification, and a formal installation and operational qualification protocol for regulated laboratory environments. Ten curated workflows and three demonstration pipeline repositories are available. oxo-flow is freely available under Apache License 2.0 at https://github.com/Traitome/oxo-flow.

05.
arXiv (CS.CV) 2026-06-12

Cross-Modal Masked Compositional Concept Modeling for Enhancing Visio-Linguistic Compositionality

Contrastively trained vision-language models like CLIP, have made remarkable progress in learning joint image-text representations, but still face challenges in compositional understanding. They often exhibit a "bag-of-words" behavior–struggling to capture the object relations, attribute-object bindings, and word order dependencies. This limitation arises not only from the reliance on global, single-vector representations for optimization, but also from the insufficient exploitation and modeling of the rich compositional information inherently present in paired image text data. In this work, we propose MACCO (MAsked Compositional Concept MOdeling), a framework that masks compositional concepts in one modality and reconstructs them conditioned on the full contextual information from the other, enabling the model to capture and align cross-modal compositional structures more effectively. To facilitate this process, we introduce two auxiliary objectives that jointly align and regularize masked features both inter-modally and intra-modally. Extensive experiments on five compositional benchmarks, along with in-depth analyses, demonstrate that our approach not only significantly enhances compositionality in VLMs but also improves their ability to capture syntactic structure and linguistic information. Additionally, the improved compositionality also benefits text-to-image generation and multimodal large language model. Code is available at https://github.com/hiker-lw/MACCO.

06.
arXiv (CS.AI) 2026-06-15

Learning optimal policies from event logs through reinforcement learning: a comparison of deep and MDP-based approaches

arXiv:2303.09209v2 Announce Type: replace Abstract: Prescriptive Process Monitoring is an emerging area within Process Mining that focuses on recommending actions to optimize business outcomes. Most existing works prescribe pre-defined interventions, i.e., sets of actions applied to ongoing process executions to achieve a specific objective or Key Performance Indicator (KPI). In contrast, only a few approaches have explored learning and evaluating optimal behavioral policies, i.e., general strategies that determine the best sequence of actions to maximize a desired KPI. In this paper, we address the problem of learning optimal behavioral policies by proposing an AI-based approach that learns an optimal policy directly from historical process executions using Reinforcement Learning (RL) to recommend the best actions for optimizing a KPI. To this end, we employ two RL techniques. The first is a classical model-based approach that extends previous work by the authors through the construction of a Markov Decision Process (MDP) capturing process behavior. The second is a model-free technique based on offline Deep RL. Unlike state-of-the-art work, we aim to minimize the use of domain knowledge and learn optimal policies directly from historical event data. This allows us to learn when to apply interventions and discover effective ones directly from data. Moreover, we target complex scenarios involving external actors, where the process owner controls only part of the activities. We adopt a data-driven Business Process Simulation (BPS) environment to evaluate the learned policies. Results show that both methods improve the targeted KPI with similar effectiveness, while the model-based approach outperforms offline Deep RL in computational efficiency.

07.
arXiv (CS.LG) 2026-06-11

CaReTS: A Multi-Task Framework Unifying Classification and Regression for Time Series Forecasting

arXiv:2511.09789v2 Announce Type: replace Abstract: Recent advances in deep forecasting models have achieved remarkable performance, yet most approaches still struggle to provide both accurate predictions and interpretable insights into temporal dynamics. This paper proposes CaReTS, a novel multi-task learning framework that combines classification and regression tasks for multi-step time series forecasting problems. The framework adopts a dual-stream architecture, where a classification branch learns the stepwise trend into the future, while a regression branch estimates the corresponding deviations from the latest observation of the target variable. The dual-stream design provides more interpretable predictions by disentangling macro-level trends from micro-level deviations in the target variable. To enable effective learning in output prediction, deviation estimation, and trend classification, we design a multi-task loss with uncertainty-aware weighting to adaptively balance the contribution of each task. Furthermore, four variants (CaReTS1–4) are instantiated under this framework to incorporate mainstream temporal modelling encoders, including convolutional neural networks (CNNs), long short-term memory networks (LSTMs), and Transformers. Experiments on real-world datasets demonstrate that CaReTS outperforms state-of-the-art (SOTA) algorithms in forecasting accuracy, while achieving higher trend classification performance.

08.
arXiv (CS.AI) 2026-06-15

Dense Coordinate-List Fine-Tuning Induces a Controllable Interference Surface in Vision-Language Models

arXiv:2606.14507v1 Announce Type: new Abstract: Fine-tuning vision-language models to emit dense coordinate lists improves visual grounding but also changes how models serialize, repeat, and terminate structured outputs. We study this behavior as a generation and control surface. In Gemma 4 12B, high-capacity q/k/v/o LoRA raises class-aware F1@0.3 from 0.007 to 0.448 while inducing repeated-tail pressure (duplicate rate 0.080, max repeat 23). A q/v rank sweep keeps max repeat at 21-22 across ranks 4-64, showing capacity persistence. The target signal is separable: object-level repeat-stop removes exact repeated records (duplicate rate 0.000, max repeat 1) while preserving F1 (0.494 to 0.490) and stricter F1@0.5 (0.381 to 0.385). Structure-axis probes localize the effect to bbox-coordinate object lists; dense non-bbox and spatial/count JSON remain repeat-clean, including under high-capacity adapters. Qwen3-VL-8B reproduces a clean controlled endpoint (F1@0.3 0.318, duplicate rate 0.000), and COCO 2017 reproduces acquisition plus duplicate pressure. Dense coordinate-list adaptation therefore creates a structure-bound, cross-family interference surface that can be measured and controlled.

09.
arXiv (CS.LG) 2026-06-11

How Low Can You Go? Active Learning for Sparse Model Discovery in the Ultra-Low-Data Limit

arXiv:2606.12182v1 Announce Type: new Abstract: Identifying the governing equations of complex dynamical systems remains a fundamental challenge across science and engineering. While early approaches relied on empirical data and heuristics, modern data-driven methods offer greater flexibility and fewer assumptions. However, data acquisition in real-world settings is often expensive. This work addresses this challenge by introducing an active learning strategy for dynamics discovery in the ultra-low data limit. Rather than sampling randomly, our method iteratively prioritizes regions that are most informative for model identification. This approach builds on Sparse Identification of Nonlinear Dynamics (SINDy), and utilizes an ensemble extension, E-SINDy, to estimate epistemic uncertainty and guide the sampling for both ordinary and partial differential equations (ODEs/PDEs). For ODEs, an exhaustive analysis is conducted on the Lorenz system across varying data budgets and noise levels. For PDEs, two systems with contrasting dynamical characteristics are examined: the Burgers' equation, where a sharp shock front creates a distinction between informative and uninformative regions, and the Kuramoto-Sivashinsky equation, which presents a more spatially complex sampling landscape. Across all scenarios, the proposed method accurately identifies the governing dynamics with significantly fewer data samples than random sampling.

10.
arXiv (CS.CL) 2026-06-18

Sumi: Open Uniform Diffusion Language Model from Scratch

Diffusion models have become a promising alternative to autoregressive models. Among these, uniform diffusion language models (UDLMs) permit any token to be updated at any step, in principle enabling more flexible generation. However, no UDLM has yet been pretrained from scratch at both large parameter scale and large token budget. Both autoregressive modeling and masked diffusion modeling already have capable models at scale that the community can study and build on; uniform diffusion has none. A scratch-pretrained UDLM at scale would provide a clean reference point for studying scaling behavior, generation dynamics, controllability, and trade-offs against established autoregressive and masked diffusion models. To this end, we introduce Sumi ("ink" in Japanese), a fully open 7B uniform diffusion language model pretrained from scratch on 1.5T tokens. Sumi performs competitively with autoregressive models trained at comparable token budgets on knowledge, reasoning, and coding benchmarks, while under-performing on commonsense benchmarks, where our education-heavy data mixture is a likely contributor. We release our model weights, checkpoints, and full training recipe, including a complete specification of the data mixture over publicly available corpora. We hope this release enables the community to study native uniform diffusion at scale and catalyzes work on its as-yet poorly understood aspects.

11.
arXiv (CS.CV) 2026-06-18

SuperCarver: Texture-Consistent 3D Geometry Super-Resolution for High-Fidelity Surface Detail Generation

Conventional production workflow of high-precision mesh assets necessitates a cumbersome and laborious process of manual sculpting by specialized 3D artists/modelers. The recent years have witnessed remarkable advances in AI-empowered 3D content creation for generating plausible structures and intricate appearances from images or text prompts. However, synthesizing realistic surface details still poses great challenges, and enhancing the geometry fidelity of existing lower-quality 3D meshes (instead of image/text-to-3D generation) remains an open problem. In this paper, we introduce SuperCarver, a 3D geometry super-resolution pipeline for supplementing texture-consistent surface details onto a given coarse mesh. We start by rendering the original textured mesh into the image domain from multiple viewpoints. To achieve detail boosting, we construct a deterministic prior-guided normal diffusion model, which is fine-tuned on a carefully curated dataset of paired detail-lacking and detail-rich normal map renderings. To update mesh surfaces from potentially imperfect normal map predictions, we design a noise-resistant inverse rendering scheme through deformable distance field. Experiments demonstrate that our SuperCarver is capable of generating realistic and expressive surface details depicted by the actual texture appearance, making it a powerful tool to both upgrade historical low-quality 3D assets and reduce the workload of sculpting high-poly meshes.

12.
arXiv (CS.CV) 2026-06-16

LentiAvatar: Pseudo-Multiview Reconstruction and Subpixel Prism Rendering for Real-Time Stereoscopic Communication

Real-time stereoscopic video communication has long been a goal of immersive telepresence, yet practical systems still require specialized capture rigs or reduce remote users to a single portrait view. We present LentiAvatar, a Gaussian head-avatar system that connects monocular avatar capture with subpixel-encoded glasses-free lenticular display for real-time autostereoscopic communication. From a monocular portrait video, LentiAvatar reconstructs a controllable head avatar and optimizes it for the lateral viewing zones induced by the display. The method uses natural head turns as pseudo-multiview (PMV) supervision to constrain regions that are otherwise weakly observed in monocular training, including hair, ears, jaw contours, and neck boundaries. Reliable side frames are yaw-binned, aligned to virtual cameras, and supervised within a strict head-and-hair domain; contour-aware losses and staged regularization further suppress ghosting, alpha leakage, and depth instability while preserving lateral detail. At runtime, LentiAvatar renders 32 virtual views and encodes them into a 4K lenticular raster with calibrated subpixel-routing masks. The live-tracker prototype sustains 10.65 FPS, and a subject-specific distilled driver raises the same display pipeline to 38.49 FPS.

13.
arXiv (CS.CL) 2026-06-19

The Voice Behind the Words: Quantifying Intersectional Bias in SpeechLLMs

Speech Large Language Models (SpeechLLMs) process spoken input directly, retaining cues such as accent and perceived gender that were previously removed in cascaded pipelines. This introduces speaker identity dependent variation in responses. We present a large-scale intersectional evaluation of accent and gender bias in three SpeechLLMs using 2,880 controlled interactions across six English accents and two gender presentations, keeping linguistic content constant through voice cloning. Using pointwise LLM-judge ratings, pairwise comparisons, and Best-Worst Scaling with human validation, we detect recurring directional disparities. Eastern European-accented speech receives lower helpfulness scores, particularly for female-presenting voices. Responses remain polite but differ in helpfulness. While LLM judges capture the directional trend of these biases, human evaluators exhibit significantly higher sensitivity, showing stronger accent-level contrasts.

14.
arXiv (quant-ph) 2026-06-19

Purity and bound energy in ancilla-assisted work extraction

arXiv:2606.19945v1 Announce Type: new Abstract: We investigate ancilla-assisted work extraction in quantum batteries from the perspective of bound energy and purity. We show that the bound energy of the reduced system provides a tight upper bound to the daemonic gain and that this bound is saturated for globally pure system–ancilla states. Motivated by this relation, we introduce a purity-based gain that qualitatively predicts the daemonic gain without requiring explicit optimization over measurements. We further introduce a protocol to analyze the role of dissipation and intrinsic interactions on daemonic gain. Under a collective environment, dissipation can dynamically generate and stabilize finite daemonic gain through environment-induced correlations. In interacting systems, level crossings and spectral restructuring strongly modify the attainable gain through their influence on the accessible bound energy. Our results demonstrate that daemonic gain is governed not only by correlations, but also by the spectral structure of the underlying Hamiltonian and information loss captured by bound energy and purity.

15.
arXiv (CS.LG) 2026-06-15

Smoothing Dark Areas in Molecular Latent Diffusion

arXiv:2606.13955v1 Announce Type: new Abstract: Latent diffusion is a promising framework for scalable 3D molecular generation, but it requires a latent space that remains smooth, valid, and navigable beyond posterior samples. Existing molecular VAEs, however, are typically learned through reconstruction-based objectives, which do not guarantee such a latent space. We show that this leads to dark areas: regions of latent space that are reachable during diffusion sampling but decode to disconnected or chemically invalid molecules. Unlike in image generation, molecular decoding requires strict structural and chemical precision, so even small latent perturbations can produce catastrophic failures. We therefore propose TopVAE, a topology-optimized VAE that reduces dark areas by making the decoder internalize structural and chemical constraints during training, eliminating the need for test-time chemical correction. TopVAE greatly improves off-posterior robustness, and when paired with a standard DiT, achieves $77\%$ lower FCD-3D on QM9, the highest V&C, $52\%$ lower FCD-3D on GEOM-Drugs, and $1.29{\times}$ more stable and connected molecules on zero-shot scaffold inpainting.

16.
arXiv (quant-ph) 2026-06-11

Shadow Engineering of Quantum Processes

arXiv:2606.12035v1 Announce Type: new Abstract: Characterizing quantum processes is essential for hardware benchmarking, error diagnosis, and algorithm verification. While recent work [PRX QUANTUM 4, 040337 (2023)] extended classical shadows from quantum state to quantum process, enabling efficient single-channel $\mathcal{E}$ property prediction, its applicability to composite processes $f(\mathcal{E}_1, \mathcal{E}_2,\cdots, \mathcal{E}_k)$ remains unexplored. We introduce shadow engineering, a framework encoding the classical shadows of processes into sparse transfer matrices to predict $f(\mathcal{E}_1, \mathcal{E}_2,\cdots, \mathcal{E}_k)$ properties with proven polynomial sample complexity, matching single-channel efficiency while exponentially lower than quantum process tomography. Crucially, this approach repurposes existing $\mathcal{E}_m$-shadow data without physical execution of $f(\mathcal{E}_1, \mathcal{E}_2,\cdots, \mathcal{E}_k)$, enabling flexible quantum process characterization with minimal hardware overhead. We demonstrate the framework's effectiveness and practicality on a superconducting quantum processor for typical applications such as error mitigation and Hamiltonian dynamical simulation. This framework unlocks new capabilities for predicting complex quantum behaviors without physical re-execution, with immediate applications in near-term device calibration and quantum simulation.

17.
arXiv (CS.AI) 2026-06-15

Sensitivity Shaping for Latent Modeling

arXiv:2606.14585v1 Announce Type: cross Abstract: Generative dynamics models enable planning in challenging robotic systems, but safe deployment requires reliably detecting policy-induced out-of-distribution (OOD) transitions. Existing methods typically treat the learned dynamics as fixed and attach post hoc support surrogates. We show that these surrogates can fail when the dynamics are locally insensitive to critical action choices: unsupported control actions may produce latent predictions that resemble demonstrated transitions, suppressing OOD signals despite large true predictive errors. To address this, we introduce support-conditioned control-sensitivity regularization, which promotes sensitive local response to control input changes in learned dynamics in high-support training regions. This preserves control-induced variation while limiting unstable extrapolation due to weak empirical support. Experiments in vision-based obstacle avoidance, manipulation, and real-robot navigation show improved OOD detection and safer closed-loop planning.

18.
arXiv (CS.CL) 2026-06-16

Weaving Multi-Source Evidence for Biomedical Reasoning: The BioMedHop Benchmark and BioWeave Framework

Biomedical question answering (QA) increasingly requires reasoning over interacting entities, where supporting evidence is scattered across biomedical knowledge graphs, literature documents, and web-accessible resources. However, existing biomedical QA benchmarks mainly focus on exam-style knowledge, literature comprehension, or short-range multi-hop inference, leaving source-conditioned graph reasoning and evidence topology construction underexplored. To fill this gap, we introduce BioMedHop, a multi-source graph-grounded benchmark for evaluating biomedical reasoning over structured evidence topologies. BioMedHop contains 10,045 instances across KG, document, web, and hybrid evidence settings, covering shared-neighbor matching, intersection reasoning, path-based reasoning, and counting, with option-based, open-ended, and numeric count renderings. To support this benchmark, we further propose BioWeave, a source-aware reasoning framework that retrieves biomedical KG paths, gathers supporting clues from documents and web sources, assembles them into a unified evidence graph, and verifies answers through entity-level evidence support. Comprehensive experiments show that BioWeave achieves the best overall performance among compared methods on BioMedHop, outperforming the strong hybrid baseline ToG-2 by 10.5% in the overall average. Moreover, BioWeave consistently improves different LLM backbones and enables smaller models, such as Qwen3-4B, to achieve reasoning performance comparable to GPT-4-Turbo.

19.
arXiv (CS.LG) 2026-06-17

A Generalized Sinkhorn Algorithm for Mean-Field Schrödinger Bridge

arXiv:2604.06531v3 Announce Type: replace-cross Abstract: The mean-field Schrödinger bridge (MFSB) problem concerns designing a minimum-effort controller that guides a diffusion process with nonlocal interaction to reach a given distribution from another by a fixed deadline. Unlike the standard Schrödinger bridge, the dynamical constraint for MFSB is the mean-field limit of a population of interacting agents with controls. It serves as a natural model for large-scale multi-agent systems. The MFSB is computationally challenging because the nonlocal interaction makes the problem nonconvex. We propose a generalization of the Hopf-Cole transform for MFSB and, building on it, design a Sinkhorn-type recursive algorithm to solve the associated system of integro-PDEs. Under mild assumptions on the interaction potential, we discuss convergence guarantees for the proposed algorithm. We present numerical examples with repulsive and attractive interactions to illustrate the theoretical contributions.

20.
arXiv (CS.AI) 2026-06-19

A Tool for the Synthesis of Adaptive Probabilistic Processors Based on the Ising Model

arXiv:2606.19533v1 Announce Type: cross Abstract: This work presents a tool for the synthesis and simulation of probabilistic architectures for solving combinatorial optimization problems by mapping them to the Ising model. The proposed approach automatically constructs the Ising Hamiltonian and determines the number of probabilistic elements (p-bits) based on problem characteristics such as size and topology. Furthermore, the tool introduces an adaptive strategy for selecting the most suitable update algorithm among Gibbs Sampling, Simulated Annealing (SA), Simulated Quantum Annealing (SQA), and cluster-based methods. Experimental results using benchmark problems demonstrate improved convergence behavior and flexibility compared to fixed approaches. The proposed framework enables systematic evaluation of probabilistic computing strategies and supports the development of future hardware implementations based on MTJs and p-bits.

21.
arXiv (CS.LG) 2026-06-12

Physics-Informed Neural Networks for Chemotherapy Pharmacokinetics: Benchmarking the Clinical Estimator and Exposing Parameter Identifiability

arXiv:2606.12658v1 Announce Type: new Abstract: Physics-Informed Neural Networks (PINNs) are an attractive tool for partial-observation problems in biology, where the governing dynamics are known but some compartments cannot be measured. Chemotherapy pharmacokinetics (PK) is a clean instance: drug concentration in plasma is routinely measured, but concentration in tissue – which determines tumour kill and off-target toxicity – is not. We benchmark a PINN against the standard clinical baseline (nonlinear least-squares on the analytical biexponential plasma solution, hereafter NLS) and a physics-agnostic neural baseline (a data-only MLP) on two PK problems. On the linear two-compartment problem, NLS is near-optimal; the PINN matches it to within a small constant factor while also producing the tissue curve in a single training pass, whereas the data-only MLP fails on tissue by roughly 10x. On a Michaelis-Menten extension (saturable elimination), the biexponential closed form no longer exists, so NLS is mis-specified and silently returns meaningless rate constants. The PINN instead exposes a deeper fact: the Michaelis-Menten two-compartment model is non-identifiable from plasma alone, and the PINN reports this honestly by converging to a basin with k12 -> 0. Adding two sparse tissue observations largely resolves identifiability: across five seeds the PINN recovers k21 to within 1% of truth and Vmax, Km to within one standard-deviation bar, while k12 moves in the correct direction (0.02 -> 0.82) but remains ~2 sigma below truth – a recovery the closed-form NLS estimator cannot attempt at all, because its biexponential ansatz describes only plasma. Our claim is not that PINNs beat NLS. It is that PINNs offer a uniform recipe that ties the textbook estimator on the textbook problem, exposes structural identifiability that the textbook estimator hides, and absorbs heterogeneous measurements within a single loss.

22.
arXiv (CS.LG) 2026-06-18

Shrinkage priors for Bayesian Substitute Confounders

arXiv:2606.18535v1 Announce Type: cross Abstract: Multi-cause observational studies contain information about unmeasured confounding through the dependence structure among causes. However, literal imputation of the unobserved confounder is often more complex than learning a lower-dimensional substitute score that preserves the shared assignment variation needed for stable causal adjustment. The deconfounder (Wang and Blei, 2019) and related substitute confounder methods exploit this idea, but flexible assignment models can fit the joint distribution of the causes while producing scores that over-encode the treatment vector, collapse overlap, or capture single-cause variation. We develop a Bayesian factor assignment framework for learning sparse substitute confounders that retain coarse multi-cause dependence with shrinkage priors. The theory is stated at the level of posterior concentration, factor score contraction, and overlap-preserving assignment geometry and therefore does not rely on a particular shrinkage prior. Under these conditions, the proposed regression-adjusted estimators are consistent for mean potential outcomes when the corresponding latent variable identification assumptions hold. Shrinkage priors provide a natural tool for latent structural learning: they favour low-dimensional factors supported by multiple causes, discourage effectively single-cause factors, and induce an ordering of the latent factors through progressive shrinkage. Synthetic experiments illustrate the roles of signal strength, outcome validity, and geometry-aware regularization. In an Alzheimer's Disease Neuroimaging Initiative (ADNI) baseline analysis, sparse substitute scores recover much of the adjustment obtained by directly conditioning on invasive cerebrospinal-fluid biomarkers, while collapse diagnostics identify when fitted factors reduce to individual observed measurements.

23.
arXiv (CS.CV) 2026-06-16

Chronological Blindness: Benchmarking Temporal Reasoning in Vision-Language Models with CHRONOSIGHT

Human perception of visual scenes is inherently temporal. We instinctively recognise whether a fruit is ripening or rotting, whether construction is progressing or being demolished, and approximately how much time separates two photographs of the same subject. Whether large vision-language models (VLMs) share this competence remains an open and practically important question. We introduce CHRONOSIGHT, a rigorously controlled benchmark evaluating five dimensions of visual temporal reasoning: CHRONORANK (chronological ordering of image sequences), CHRONOLOCATE (ordinal stage localisation from a single image), CHRONODELTA (estimation of time elapsed between two images on a logarithmic scale), CHRONOREVERSE (detection of temporally reversed sequences), and CHRONOODD (identification of a temporal outlier within a set). The benchmark comprises 1{,}000 items across eight process families (biological growth, food transformation, physical weathering, construction, environmental change, human ageing, astronomical phenomena, and urban dynamics) spanning timescales from minutes to millennia. We evaluate eight open-source VLMs (500 M to 19 B parameters) under two prompting regimes and collect human performance baselines. Human performance averages 0.89 across tasks; the best open model (Qwen2.5-VL-7B) reaches 0.40 under direct prompting, a gap we term chronological blindness. Lightweight LoRA fine-tuning on 151 examples raises CHRONODELTA accuracy from near-zero to 0.43, transferring zero-shot to related tasks (CHRONOODD: 0.37; CHRONOREVERSE: 0.64)suggesting the bottleneck is partly instruction following rather than visual perception. Benchmark, code, and predictions will be released upon acceptance.

24.
arXiv (math.PR) 2026-06-12

Scaling limits of the single-curve interface and outermost loops in the planar random field Ising model

arXiv:2606.13147v1 Announce Type: new Abstract: We prove that the interface separating $+1$ and $-1$ spins in the near-critical planar random field Ising model (RFIM) with Dobrushin boundary conditions has a scaling limit, whose law is conformally covariant and almost surely absolutely continuous with respect to SLE$_3$. The limiting curve can be seen as a massive version of SLE$_3$ in the sense of Makarov and Smirnov, but in a random environment. We then show that the outermost spin loops of the near-critical planar RFIM with $+1$ boundary conditions have subsequential limits and that any of these limits is almost surely singular with respect to CLE$_3$. This dichotomy between absolute continuity of the single interface and singularity of the outermost loops reflects the fact that a single interface does not explore enough of the magnetization field of the near-critical RFIM to detect the singularity of this field with respect to the critical Ising magnetization field, whereas the outermost spin loops do.

25.
arXiv (CS.CL) 2026-06-17

Decoding Hidden Deception in Reasoning LLMs: Activation Explainers for Deception Auditing

As LLMs acquire stronger reasoning capabilities, deceptive behavior becomes an increasingly serious safety concern. Existing deception monitors either score visible transcripts or derive scalar probe scores from representation vectors, leaving little inspectable evidence about why a response is suspicious. We introduce STATEWITNESS, an activation explainer for deception auditing. A separate decoder reads a target model's hidden states, then answers natural-language queries or emits structured reports about them. We evaluate STATEWITNESS on two target reasoning LLMs across seven deception datasets. STATEWITNESS reaches 0.916 mean AUROC, a relative gain of 11.6% over the best black-box text monitor and 25.0% over the best activation-probe baseline under the same evaluation protocol. When combined with existing monitors, STATEWITNESS reduces missed deceptive examples in simple threshold ensembles. Beyond scalar detection, the decoder returns query-level answers, schema reports, and token- or sentence-level evidence traces for human inspection. We view this interface as a potential building block for broader interpretability and alignment tools.