Academic Intelligence · Curated Daily

探索全球前沿学术脉络

AcademicHub 汇聚顶级期刊与预印本平台的实时文献。定制您的专属科研雷达,利用大语言模型自动生成交叉领域文献分析简报。

01.
arXiv (CS.LG) 2026-06-12

Estimating Individualized Treatment Effects in Acute Ischemic Stroke with Causal Transformation Models (TRAM-DAG): A Multi-Centre Observational Study with External RCT Validation

arXiv:2606.12623v1 Announce Type: cross Abstract: Personalized medicine in acute ischemic stroke requires moving beyond average treatment effects (ATE) to individualized treatment effect (ITE) estimates to support treatment decisions. In acute ischemic stroke, mechanical thrombectomy has been shown to be more effective on average than lysis in randomized controlled trials (RCTs), such as the MR CLEAN study. We aim to identify which individual patients benefit most from mechanical thrombectomy compared to lysis. The outcome of interest is the modified Rankin Scale (mRS) at three months, an ordinal measure of functional disability (0: no symptoms, 6: death). We demonstrate that causal transformation models on directed acyclic graphs (TRAM-DAG) can be used for ITE estimation after being fitted on observational MAGIC multi-center stroke patient data. To ensure comparability with the MR CLEAN population, which we use for validation, we train the TRAM-DAG on a MAGIC sub-population with NIHSS at admission >= 6, corresponding to one inclusion criterion of MR CLEAN. The fitted model is then used to estimate ITEs for stroke patients in the MR CLEAN population. While these ITE estimates cannot be confirmed experimentally, we show that their average is consistent with the trial's reported ATE. Furthermore, the ITE estimates correctly rank trial patients by their observed frequency of a good outcome (mRS at three months

02.
arXiv (CS.AI) 2026-06-16

Green SARC: Predictive Cost and Carbon Governance for Agentic AI Systems

arXiv:2606.15954v1 Announce Type: cross Abstract: Agentic AI systems act through tools and sub-agents, yet the controls meant to bound their financial and environmental cost still sit on dashboards evaluated beside or after execution. Green SARC applies the SARC governance-by-architecture framework – four enforcement sites in the agent loop – to FinOps and GreenOps, contributing the theory of what to enforce and how to predict it. We report four policy-independent results. (i) The unconstrained "State Snowball" is $\Theta(n^2)$ in loop depth; on 3,000 real multi-step plans (SWE-rebench) it holds on 100%, with median curvature $\hat{c}_2=216$ exceeding the linear-accretion prediction $p/2=134$ – real plans accrete faster than the model. (ii) On real residuals the Normal-$\sigma$ gate under-covers (92% at nominal 95%); split-conformal calibration holds (95.2%). (iii) A soft Lagrangian penalty tuned to the budget in expectation breaches it on 91.5% of seeds; the architectural gate breaches 0%. (iv) Under binding budgets the gate's over-budget incidence is 0% on synthetic and real (BurstGPT) arrivals. End-to-end token/USD/carbon savings (47–55%) are real but policy-dependent in magnitude – set by a scope-cap knob, not by gate rejections. The library is open-source, dependency-free, and ships a regeneration script for every cited number.

03.
arXiv (CS.LG) 2026-06-16

Task-Error Residual Learning for Real-Robot Five-Ball Juggling

arXiv:2606.16978v1 Announce Type: cross Abstract: For residual learning that refines existing behavior, sample efficiency depends on two things: how much information each rollout returns, and how efficiently the learner uses that information. Reinforcement learning's standard scalar reward carries far less information than the directional task error that defines the task. Random exploration further discards whatever information each rollout returns. Through residual learning with directional task-error supervision and a task error model that drives sample selection, we achieve stable three-, four-, and five-ball juggling on anthropomorphic Barrett WAM arms. Despite planning and controlling through a simple, idealized stack, the system converges from the second attempt. The first attempt drops, after which task error decreases monotonically without further failures. In comparison, five-ball juggling typically takes humans years of practice. We compare residual learners across two ternary axes, the directional information in the learning feedback and the commitment of the analytic prior, spanning Newton-style Jacobian updates, Composite Bayesian Optimization, and stochastic search methods. Both axes prove necessary: neither directional feedback nor an informative prior suffices alone, and the simplest method that combines them, a fixed-Jacobian Newton update, is the most reliable. The learned residual tolerates substantial prior misalignment and degraded joint tracking, affecting mainly convergence speed. The bottleneck for residual learning on real robots is therefore the information content of the supervision signal and how the learner uses it, not the accuracy of the surrounding stack. Video documentation of all experiments is available at https://kai-ploeger.com/residual-juggling.

04.
arXiv (CS.AI) 2026-06-11

Synthetic Homes: A Multimodal Generative AI Pipeline for Residential Building Data Generation under Data Scarcity

arXiv:2509.09794v5 Announce Type: replace Abstract: Computational models have emerged as powerful tools for multi-scale energy modeling research at the building and urban scale, supporting data-driven analysis across building and urban energy systems. However, these models require large amounts of building parameter data that is often inaccessible, expensive to collect, or subject to privacy constraints. We introduce a modular, multimodal generative Artificial Intelligence (AI) framework that integrates image, tabular, and simulation-based components and produces synthetic residential building datasets from publicly available county records and images, and present an end-to-end pipeline instantiating this framework. To reduce typical Large Language Model (LLM) challenges, we evaluate our model's components using occlusion-based visual focus analysis. Our analysis demonstrates that our selected vision-language model achieves greater visual focus than a GPT-based alternative for building image processing. We also assess realism of our results against a national reference dataset, finding that our synthetic data overlaps more than 95% for three of the four selected variables. This work reduces dependence on costly or restricted data sources, lowering barriers to building-scale energy research and Machine Learning (ML)-driven urban energy modeling, and therefore enabling scalable downstream tasks such as energy modeling, retrofit analysis, and urban-scale simulation under data scarcity.

05.
arXiv (CS.CV) 2026-06-12

On Pitfalls of $RemOve-And-Retrain$: Data Processing Inequality Perspective

The RemOve-And-Retrain (ROAR) benchmark is widely used to evaluate feature attribution methods, yet its validity remains underexplored from an information-theoretic perspective. We show that model- and data-agnostic post-processing of attribution maps (transformations that, by the data processing inequality, cannot add information about the decision function) can often improve ROAR scores. This means that an improved ROAR ranking is not, by itself, evidence that an attribution map carries more information about the model. We trace this failure mode to a bias toward spatially blurry masks. Experiments on CIFAR-10, SVHN, and CUB-200 show a consistent association between blurriness and ROAR performance, a pattern that also appears in the ROAD variant. We provide guidelines for more cautious removal-based benchmarking, with implications for validating mechanistic understanding of neural network internals.

06.
arXiv (CS.LG) 2026-06-16

Communication-Efficient Distributed Training for Collaborative Flat Optima Recovery in Deep Learning

arXiv:2507.20424v3 Announce Type: replace Abstract: We study centralized distributed data parallel training of deep neural networks (DNNs), aiming to improve the trade-off between communication efficiency and model performance of the local gradient methods. To this end, we revisit the flat-minima hypothesis, which suggests that models with better generalization tend to lie in flatter regions of the loss landscape. We introduce a simple, yet effective, sharpness measure, Inverse Mean Valley, and demonstrate its strong correlation with the generalization gap of DNNs. We incorporate an efficient relaxation of this measure into the distributed training objective as a lightweight regularizer that encourages workers to collaboratively seek wide minima. The regularizer exerts a pushing force that counteracts the consensus step pulling the workers together, giving rise to the Distributed Pull-Push Force (DPPF) algorithm. Empirically, we show that DPPF outperforms other communication-efficient approaches and achieves better generalization performance than local gradient methods and synchronous gradient averaging, while maintaining communication efficiency. In addition, our loss landscape visualizations confirm the ability of DPPF to locate flatter minima. On the theoretical side, we show that DPPF guides workers to span flat valleys, with the final valley width governed by the interplay between push and pull strengths, and that its pull-push dynamics is self-stabilizing. We further provide generalization guarantees linked to the valley width and prove convergence in the non-convex setting.

07.
arXiv (CS.CV) 2026-06-18

Toward Training-Free Zero-Shot Anomaly Detection in 3D Medical Images: A Batch-Based Approach Using 2D Foundation Models

作者:

Zero-shot anomaly detection (ZSAD) is attractive for medical imaging because clinical systems must handle heterogeneous acquisition protocols, changing patient populations, and pathologies for which annotated training data may be unavailable. Most existing zero-shot anomaly detection methods are designed for 2D images, and their direct extension to 3D medical volumes is limited by the scarcity of large-scale volumetric foundation models or by the difficulty of utilizing volumetric context. We propose CS3F, a training-free batch-based framework for ZSAD in 3D medical images using 2D foundation models. Each volume is decomposed along multiple anatomical axes and encoded slice-wise by a 2D vision transformer. These are then converted into localized volumetric tokens by pooling neighboring slice features. Anomaly scores are obtained from cross-subject mutual similarity: tokens that lack close analogues in other subjects are assigned higher anomaly scores. To reduce the attenuation of focal lesion signals caused by depth pooling, we introduce a coarse-to-fine tokenization strategy that enables fine-resolution volumetric scoring without exhaustive matching. CS3F is evaluated on brain MRI across metastases, glioma, and stroke, as well as validated on lung CT to test generalizability beyond atlas-aligned brain MRI. The results show that frozen 2D foundation models can support anomaly localization in 3D medical images, and that the benefit of fine tokenization depends strongly on lesion contrast and imaging modality.

08.
arXiv (CS.CL) 2026-06-11

Semantic Grading of Written Answers in Low-Resource Language Bangla Using a Fine-Tuned Lightweight Language Model

Bangla is among the world's most widely spoken languages, yet it remains underserved in educational NLP research. In many remote and rural regions, access to qualified subject teachers is limited, and written answers are consequently graded largely by hand, restricting timely and consistent feedback. Automatic assessment is challenging because semantically correct responses can vary substantially in surface form. We present a bilingual (Bangla-English) evaluation system designed for low-resource educational settings that prioritizes semantic correctness over lexical overlap. Our approach fine-tunes a lightweight language model to grade each response using the question, reference answer, and student answer, producing a numeric score and concise, context-grounded feedback suitable for classroom deployment. We also construct a synthetic bilingual dataset to enable controlled training and evaluation. Across proprietary and open-source LLMs evaluated under a unified protocol, our QLoRA-tuned Qwen3-8B confirms consistent improvement by producing the most leakage-resistant feedback (RoRa = 0.819) in synthetic evaluation and the strongest agreement with human scores (rho = 0.936, MAE = 0.725) in a dedicated human study.

09.
arXiv (CS.AI) 2026-06-16

Towards Unified Song Generation and Singing Voice Conversion with Accompaniment Co-Generation

arXiv:2606.07015v2 Announce Type: replace-cross Abstract: While song generation and singing voice conversion (SVC) have evolved significantly, they have long been developed isolated: the former lacks zero-shot speaker cloning, while the latter overlooks vocal-accompaniment synergy. To bridge this gap, we propose UniSinger, the first end-to-end framework unifying speaker cloning song generation and accompaniment co-generation SVC. Building on the multimodal diffusion transformer, we construct a unified speaker embedding space transferring speaker representation from SVC to song generation, endowing fine-grained cross-task timbre control. To mitigate multi-task optimization conflicts, we design a curriculum learning strategy using task-specific modality masking to guide the model to gradually master the generative mechanisms among semantic content, vocal timbre, and accompaniment. Experiments show state-of-the-art performance on both tasks and realizes complementary benefits, offering new possibilities for intelligent music production.

10.
arXiv (quant-ph) 2026-06-16

Optimal Toffoli-Depth Multi-Controlled Toffoli Decomposition in 2D Qubit Layout

arXiv:2606.15113v1 Announce Type: new Abstract: The multi-controlled Toffoli (MCT) gate is a key primitive in quantum arithmetic, oracle construction, and quantum cryptanalysis. Although recent work has established optimal Toffoli-depth MCT decompositions under all-to-all qubit connectivity, their realization on near-term quantum hardware with restricted qubit connectivity remains largely unexplored. While general-purpose quantum mappers can route arbitrary circuits, they do not explicitly exploit the repeated interaction patterns inherent in MCT decompositions. In our present paper, we study architecture-aware mappings of optimal Toffoli-depth MCT decompositions onto restricted two-dimensional qubit layouts. We begin with a structured geometric placements that preserve the parallelism of state-of-the-art Toffoli and MCT decompositions with no additional depth overhead. We further introduce a motif-based packing framework in which decomposition layers are represented by interaction motifs derived from basic Toffoli gates. By embedding these motifs vertex-disjointly into hardware graphs, we characterize the minimum-size topologies supporting the required qubit resources and derive explicit bounds on the resulting depth overhead under tight qubit budgets. Finally, we compare these bounds with routing-aware placement heuristics and empirically evaluate the effectiveness of embedding different motifs across a range of hardware topologies.

11.
medRxiv (Medicine) 2026-06-10

A Three-Tier Operational Benchmark for Evaluating Large Language Models on Hospital Medication Safety

Objective. To introduce PsiBench, a clinically validated medication-safety benchmark for evaluating large language models (LLMs) against the standards used to certify hospital computerized provider order entry (CPOE) and electronic health record (EHR) systems, and a non-overlapping three-tier evaluation framework separating highest-stakes discrimination, the operational CDS regime, and category-correct alerting. Materials and Methods. PsiBench comprises 492 medication-safety scenarios across 11 safety categories, created by clinical pharmacology experts whose work underpins an annualized testing procedure used by more than 2,000 U.S. hospitals. The three-tier framework partitions the scenarios non-overlappingly: Discrimination (98 scenarios, 50 fatal vs 48 deception, near-balanced 51%/49%); Operational (394 scenarios, 261 serious unsafe plus 133 safe including 41 Excessive Alerts reclassified as operational negatives); and Attribution (311 alert-required scenarios). We evaluated 40 frontier LLMs from 10 providers over 3 runs per scenario at temperature 0.2 (or the provider default where temperature is not configurable), yielding 59,040 evaluations conducted April 21-23, 2026. Results. Headline binary performance on the full benchmark spans a wide range across the 40 models: F1 78.5%-92.3%, accuracy 65.4%-89.8%, sensitivity 81.4%-100.0%, specificity 6.1%-81.8%. Leading models by F1 (o4-mini 92.3%; o3 92.2%) pair high sensitivity with meaningful specificity; three models saturate sensitivity at 100% but fall below 25% specificity, indistinguishable from a naive always-alert classifier. The wide spread on a single headline metric motivates tier-specific analyses, developed in a separate clinical paper. Discussion and Conclusion. PsiBench and the three-tier framework operationalize a rigorous evaluation rubric for LLM medication safety, grounded in two decades of national hospital audit experience. The framework generalizes to any binary medication-safety classifier (rule-based, conventional ML, or LLM-driven), supporting tier-aware model selection and post-deployment surveillance.

12.
arXiv (CS.CV) 2026-06-16

A Multi-Center Benchmark for Abdominal Disease Diagnosis and Report Generation from Non-Contrast CT

Multiphasic contrast-enhanced CT (CECT) is widely used for abdominal lesion characterization, yet it carries inherent risks of contrast-induced nephropathy, escalates acquisition burden, and heavily contributes to radiologist workload. To address these challenges, we introduce a novel multi-center benchmark for multi-organ abdominal disease diagnosis and automated radiology report generation, which learns to synthesize contrast-enhanced findings from single-phase non-contrast CT (NCCT). To support this, we curated a large-scale dataset of paired NCCT-CECT studies and their corresponding contrast-enhanced radiology reports from two centers, partitioned into internal sets and an external validation cohort. Under a unified evaluation protocol, we benchmarked five contemporary deep learning architectures encompassing chest-specific, abdomen-specific, and general-purpose multimodal domains. Extensive experiments demonstrate that NCCT retains diagnostic signals, achieving an average multi-organ AUC of 69.1% on the internal cohort and 63.1% on the external cohort, respectively. By releasing this dataset and standardized benchmark publicly, this study aims to catalyze future research into safer, resource-efficient, and globally accessible contrast-free abdominal imaging workflows. Code is available at: https://github.com/xmed-lab/TriALS-Report.

13.
arXiv (CS.AI) 2026-06-11

Learning to Inject: Automated Prompt Injection via Reinforcement Learning

arXiv:2602.05746v2 Announce Type: replace-cross Abstract: Prompt injection is a critical vulnerability in LLM agents, yet the strongest methods still rely on human red-teamers and hand-crafted prompts. Adapting automated jailbreak optimizers does not close this gap: jailbreaks shape models toward generic compliance, while prompt injection requires emitting specific tool calls with correct parameters. The success signal is binary, and randomly sampled suffixes almost never trigger it, so standard optimizers have no gradient to follow. We present AutoInject, a black-box reinforcement learning (RL) framework that learns adversarial suffixes for prompt injection. A learned comparison-based reward scores each candidate against the best suffix seen so far, turning the binary signal into a dense reward suitable for RL optimization. The framework supports both online query-based attacks and offline-trained transferable suffixes that need no utility access at deployment, and incorporates a utility objective when task-completion feedback is available. On AgentDojo, AutoInject outperforms template attacks, GCG, TAP, and adaptive attack across production models, with statistically significant improvements under McNemar's test with p

14.
arXiv (CS.LG) 2026-06-16

The limits of interpretability in multiple linear regression

arXiv:2606.16013v1 Announce Type: cross Abstract: Interpreting machine-learning models has attracted increasing attention, particularly in the physical sciences, where one often seeks to understand the underlying mechanisms rather than merely make predictions. Multiple linear regression is often regarded as an interpretable alternative to more complex models, such as deep neural networks, because its predictions are expressed as explicit weighted sums of input features. However, when input features are strongly correlated, namely in the presence of multicollinearity, the learned weights can exhibit large dataset-to-dataset fluctuations and oscillatory behavior across physically similar features, making their interpretation difficult or even impossible. Although the instability of the weights under multicollinearity is well known in statistics, its consequences for physical interpretation, in particular its connection to oscillatory weights across physically similar features, have not been systematically clarified. Here, we theoretically discuss the mechanism behind this loss of interpretability by analyzing the eigenmodes of the feature correlation matrix. We show that small-eigenvalue modes associated with multicollinearity amplify fluctuations in the weights and generate oscillatory patterns that do not necessarily reflect meaningful contributions. We test this theoretical picture numerically on physics datasets and show that Ridge regularization suppresses these unstable modes, although the resulting weights must still be interpreted with caution. We further confirm the generality of our findings beyond physics by analyzing a diverse collection of publicly available datasets. Our results clarify why, in the presence of multicollinearity, physical interpretation can remain difficult even for linear regression models.

15.
arXiv (quant-ph) 2026-06-15

Universal Speed Limit in a Far-from-Equilibrium Bose Gas: Symmetry and Dynamical Decoherence

arXiv:2605.11895v2 Announce Type: replace-cross Abstract: Predicting universal transport coefficients in far-from-equilibrium quantum systems remains a fundamental challenge. A paradigmatic example is the non-thermal fixed point (NTFP) of isolated Bose gases, where coherence spreads as $\ell^2(t) = C\hbar t/m$ with a universal constant $C$. While the scaling exponent $z=2$ is well established, the amplitude $C$ has remained elusive because the underlying particle cascade $n(k)\sim k^{-4}$ leads to a divergent kinetic energy, threatening the very existence of a constant speed limit. Here we resolve this paradox and present the first analytical, parameter-free prediction of a universal amplitude $C$. A deep interplay between symmetry and dissipation is uncovered. The emergent weak U(1) symmetry at the NTFP enforces a conserved total current, forcing the low-energy phase dynamics to obey a diffusive Langevin equation with noise entering as the divergence of a stochastic current. This structure, combined with dynamical decoherence of high-momentum modes, yields a universal power-law momentum distribution $\tilde{f}(v)\sim(1+v^2)^{-3}$ (with $v=k\ell$) that naturally regularizes the ultraviolet divergence. From this, a parameter-free geometric baseline $C=3$ is obtained, independent of microscopic details. The experimental value $C=3.4(3)$ [Martirosyan et al., Nature 647, 608 (2025)] is then shown to be quantitatively consistent with universal logarithmic corrections arising from a marginally irrelevant coupling at the fixed point. A new paradigm is thus established for predicting transport coefficients in strongly correlated non-equilibrium systems: symmetry constraints determine the low-energy effective theory, dynamical decoherence provides a natural ultraviolet completion, and scaling analysis delivers testable predictions moving beyond scaling exponents to quantitative amplitude prediction.

16.
arXiv (CS.CL) 2026-06-15

Spatio-Temporal Audio Language Modeling for Dynamic Sound Sources

Sound events are entities with semantic identities, locations, and trajectories, but current audio-language models usually reason about clips as global event content. Conversely, sound event localization models track source directions over time but offer limited semantic coverage for language reasoning. To address this gap, we introduce ST-AudioQA, a spatio-temporal audio QA dataset and benchmark built from first-order ambisonic (FOA) renderings of static and moving sound sources. Each scene provides source identity, activity, direction, distance, and motion metadata, enabling dense trajectory supervision and questions about what is sounding, where it is, how it moves, and how sources relate. We further propose ST-Audio Encoder, a time-resolved FOA audio encoder that learns event semantics together with source trajectories, and ST-AudioLM, which connects the audio tokens from the encoder to an LLM for spatio-temporal audio QA. Experiments show that this representation improves the semantic-localization tradeoff and yields stronger reasoning performance than static spatial and localization-oriented baselines.

17.
arXiv (CS.LG) 2026-06-11

Knowledge Manifold: A Riemannian Geometric Framework for Semantic Mapping and Geodesic Analysis of Scientific Literature

arXiv:2606.05907v2 Announce Type: replace-cross Abstract: We present the knowledge manifold: a Riemannian geometric space in which a corpus of documents is arranged according to semantic positional relationships derived from character n-gram TF-IDF representations. The framework proceeds in five tightly coupled stages. First, each document is converted to a character-level n-gram TF-IDF vector (4-7 grams, up to 250,000 features, L2-normalized) and embedded in a two-dimensional knowledge map via constrained stress minimization with repulsion, variance, and centering regularizers. Second, knowledge at an arbitrary query point is estimated through Smoothed Particle Hydrodynamics (SPH) interpolation using a cubic-spline kernel, yielding an interpolated TF-IDF feature vector that can be linguistically characterized. Third, directional knowledge gradients at 0, 45, and 90 degrees are computed from the SPH interpolation map, and pairwise directional similarity is quantified via inner product and cosine similarity. Fourth, a Gaussian Process Regression (GPR) model, with a Constant x RBF + White kernel fitted on a 10-dimensional SVD projection, provides a Bayesian posterior mean, uncertainty estimate, and per-document contribution rate at the query point. Fifth, geodesics in the knowledge space are obtained by minimizing a discrete Riemannian path energy derived from the SPH-induced metric tensor, using L-BFGS-B with seven deterministic initial-path candidates. We apply the formulation to a corpus of 20 papers in fiber-reinforced composite materials and aerospace structural mechanics, showing that the semantic map recovers meaningful research clusters, geodesic paths reveal natural conceptual bridges between distant topics, and SPH/GPR interpolation enables the generation of virtual knowledge: hypothetical paper abstracts describing unstudied but geometrically predicted research directions.

18.
arXiv (CS.AI) 2026-06-12

AgentRivet: an automated system for producing Rivet routines from journal publications

arXiv:2606.13535v1 Announce Type: cross Abstract: Particle physics collider experiments provide Rivet routines as part of the analysis preservation strategy for model-independent measurements. Rivet is a C++ toolkit that allow new theoretical models to be compared to the measurements, thus aiding the development and tuning of Monte Carlo event generators as well as searches for physics beyond the Standard Model. However, analysis coverage is known to be incomplete, with only 39% of measurements having documented and publicly available Rivet routines. In this article, we design and implement an automated workflow based on Large Language Models with the goal of providing the missing routines. This multi-step workflow, referred to as AgentRivet, extracts the physics analysis information from published papers and writes the missing Rivet routines, with intermediate code- and physics- reviews as part of an autonomous quality control. We report the results obtained using commercial Large Language Models, provided by OpenAI, Anthropic, and Google, for two recent measurements from the ATLAS and CMS experiments. We find that AgentRivet produces competent Rivet routines with few syntax errors. The physics fidelity of the routines is reasonable and follows the explanations given in the relevant publications. Nevertheless, physics-implementation issues do arise and are investigated using the artefacts produced by AgentRivet. The majority of physics implementation issues arise from subtle-but-ambiguous definitions in the given publication, although some models struggle to implement complex observables even when clear definitions are given.

19.
arXiv (CS.CV) 2026-06-17

Geometric Consistency Protocol for Foundation Model Features in Multi-View Satellite Imagery

Standardized evaluation protocols are indispensable for robust benchmarking in remote sensing, particularly as foundation features are increasingly transferred across diverse sensors and complex imaging geometries. In satellite multi-view reconstruction, conventional evaluations relying on unconstrained 2D global matching are often misleading. The Rational Function Model (RFM) and its Rational Polynomial Coefficients (RPC) dictate a curved, height-dependent epipolar geometry that render flat 2D search spaces physically inconsistent. We propose a geometry-faithful and reproducible protocol tailored for the RPC framework. Our approach integrates an RPC-projected 3D consistency metric with a geometry-constrained dense matching proxy, specifically evaluating whether similarity responses remain localized and unique under physically plausible search manifolds. A pivotal finding of our joint reporting strategy is the decoupling of semantic agreement and geometric localization: high cross-view similarity at a projected 3D point does not guarantee reliable matchability in practical inference. Our benchmark demonstrates that incorporating geometric constraints is fundamental to the problem definition in satellite imagery. Furthermore, we show that state-of-the-art 2D backbones remain remarkably competitive against specialized 3D-aware models when subjected to this RPC-consistent evaluation.

20.
arXiv (CS.CV) 2026-06-18

Rethinking the Pointer Loss in Table Structure Recognition: Geometry-Aware Pointer Loss for Spatial Locality

Table Structure Recognition (TSR) using a pointer network achieves impressive results by predicting HTML sequences while aligning tags to detected text (or cell) regions. However, our analysis reveals that when pointer networks fail, 79.6% of errors occur between spatially adjacent cells (Manhattan distance

21.
arXiv (CS.CV) 2026-06-16

Vision-Encoder Behavioral Fingerprints of Image-to-Image Generative Models: A Training-Paradigm-Driven Taxonomy of Six Commercial APIs

作者:

We study six production image-to-image AI systems (gpt-image-1, Gemini 2.5 Flash Image, Flux Kontext, SDXL img2img, SD3 img2img, and Qwen Image Edit) under a content-adaptive sub-JND adversarial perturbation pipeline, scoring all outputs by frozen DINOv2 ViT-B/14 token distances against clean references. Across a 3,588-call corpus spanning COCO photographs, CelebA-HQ portraits, and AI-generated inputs, the six systems partition into two image-invariant behavioral bands on a 2D (patch_mean, ssim_clean) plane: edit-trained models (Flux Kontext, Qwen Edit, Gemini) cluster in a tight band, while T2I-base models adapted at sampling time (SDXL, SD3, gpt-image-1) cluster in a drift band.

22.
arXiv (CS.CV) 2026-06-11

P3D-Bench: Benchmarking MLLMs for Parametric 3D Generation and Structural Reasoning

Multimodal large language models can write code to produce complex programs as well as use programs to do 3D modeling, which opens up a new avenue for 3D generation powered by their priors, world knowledge and reasoning. Yet existing benchmarks rarely evaluate 3D modeling through code. Such modeling demands more than runnable code: from a text or visual specification, a model must generate a parametric 3D program that is geometrically precise, semantically aligned and assembly-consistent. We introduce P3D-Bench, a benchmark for parametric 3D generation. Unlike a 3D mesh, a parametric 3D program exposes explicit dimensions, construction operations and part relations, revealing whether a model recovers a design's structure, not just its appearance. Under a unified protocol, P3D-Bench covers three task families (Text-to-3D, Image-to-3D and Assembly-3D) and scores each output for executability, geometric fidelity, topology, text-grounded constraints, multiview semantic alignment and part-level structure. We evaluate frontier MLLMs and text-only LLMs on 400 text cases, 400 image cases and 203 annotated assemblies, with domain-specific models as reference points. Our extensive evaluation yields three findings. First, assemblies are the hardest setting, where models still fail to compose multiple parts into a coherent structure. Second, models can often recover the global shape and semantic identity of the target object, yet fail to reproduce the precise parametric geometry specified by the input. Third, part-level modeling remains weak on assemblies, where models recover neither the geometry of each part nor the right number of parts. These results position P3D-Bench as a benchmark for evaluating precise parametric geometry and part-level structure in parametric 3D generation.

23.
arXiv (CS.CL) 2026-06-12

From Tokens to Faces: Investigating Discrete Speech Representations for 3D Facial Animation

The choice of speech representation is critical in speech-driven 3D facial animation. Representations differ in what they encode: SSL features emphasize segmental and semantic cues, neural codecs yield latents optimized for acoustic reconstruction, and ASR-style objectives produce label-based spaces. We evaluate four speech representation families for 3D facial synthesis, comparing their facial reconstruction quality across two facial decoders using objective metrics and a perceptual evaluation. We additionally conduct probing analyses that relate tokenized representations to phonetic units and to articulatory deformations. We found that encoding phonetic classes is beneficial for accurate facial animation prediction on both semantic and label-based representations with comparable facial animation quality. From the latter, we introduce an Audio Visual Text-to-Speech (AVTTS) pipeline that leverages, as a shared space, discrete representations to decode speech and 3D facial motion.

25.
arXiv (CS.AI) 2026-06-12

Select and Improve: Understanding the Mechanics of Post-Training for Reasoning

arXiv:2606.13125v1 Announce Type: cross Abstract: Reinforcement learning has rapidly emerged as a key component in the training of reasoning and coding models, yet it remains poorly understood from a mechanistic perspective. We study how and through what underlying processes capabilities are acquired or enhanced via reinforcement learning post-training. Our analysis, based on controlled math reasoning experiments with Qwen-2.5-1.5B, reveals two core mechanisms: strategy selection and strategy improvement. Our results highlight the role of SFT data and reinforcement learning data in activating these mechanisms, in particular showing how supervising the model on diverse reasoning strategies can enable strategy selection and how increasing difficulty in reinforcement learning data can enable strategy improvement. Taken together, our results provide mechanistic insight into RL training and suggest practical interventions to continue scaling reasoning capabilities.