Academic Intelligence · Curated Daily

探索全球前沿学术脉络

AcademicHub 汇聚顶级期刊与预印本平台的实时文献。定制您的专属科研雷达,利用大语言模型自动生成交叉领域文献分析简报。

01.
arXiv (quant-ph) 2026-06-11

Measurement-Free Toric-Code Memory in Array Globally Controlled Rydberg Array

arXiv:2606.12030v1 Announce Type: new Abstract: The central prerequisite of any fault-tolerant quantum architecture is a quantum memory: a block of encoded physical qubits whose logical state is actively preserved against noise across many rounds of error correction. In neutral-atom Rydberg arrays, realizing such a memory is obstructed not by the entangling gates themselves, which are already fast and high-fidelity, but by the auxiliary operations that a conventional error-correction cycle requires: mid-circuit fluorescence measurement, inter-zone atom transport, and locally focused single-qubit addressing. Each of these introduces latency, atom loss, or optical crosstalk that exceeds the cost of the underlying gates by orders of magnitude. These costs accumulate cycle after cycle, progressively degrading the very logical information the code is meant to protect. Here we propose a protocol that stabilizes a toric-code quantum memory without moving, measuring or local addressing atoms. The key is to use a three-species Rydberg atom array for the complete stabilizer cycle, including syndrome extraction, coherent correction, and ancilla reset, under global, species-selective laser pulses. Numerical simulation of a $4 \times 4$ rotated toric code shows a longer qubit lifetime when the physical error rate is below a pseudo-threshold $p^\star \approx 0.034$. The scheme offers a concrete, hardware-efficient route to topological quantum memory in neutral-atom platforms.

02.
arXiv (math.PR) 2026-06-11

Heat kernel estimates for Markov processes with blowing-up jump kernels

arXiv:2512.24807v2 Announce Type: replace Abstract: In this paper, we establish sharp two-sided heat kernel estimates for a large class of purely discontinuous symmetric Markov processes on closed subsets $F$ of $\mathbb{R}^d$, whose jump kernels blow up on a Borel subset $\Sigma$ of $F$. We assume that $F\setminus \Sigma$ is a $\kappa$-fat set and is dense in $F$. To the best of our knowledge, this is the first work establishing sharp heat kernel estimates for jump processes whose jump kernels blow up on part of the state space. The jump kernels under consideration take the form $J(x,y)=|x-y|^{-d-\alpha}{\mathcal B}(x,y)$, where $\alpha\in (0,2)$ and the function ${\mathcal B}(x,y)$ blows up at a subset $\Sigma$ of $F$. A fundamental obstacle is that the tails of the jump measures are not uniformly bounded, and hence standard techniques in heat kernel analysis do not provide a priori off-diagonal estimates. To overcome this difficulty, we develop a new approach based on weighted integral estimates for the heat kernel that are sensitive to both the blow-up behavior of the jump kernel and the geometry of $F\setminus \Sigma$. Examples of processes falling within our general framework include traces of isotropic $\alpha$-stable processes in $C^{1,\rm Dini}$ sets, processes in Lipschitz sets arising in connection with the nonlocal Neumann problem, and a large class of resurrected self-similar processes in the closed upper half-space.

03.
arXiv (CS.CV) 2026-06-16

Enhancing Precision Agriculture with a Hybrid Deep Learning Framework for Multi-Class Plant Disease Classification and Interpretability

This study proposes an overall deep learning architecture for multi-class classification of plant diseases from high-resolution leaf imagery, with a particular interest in investigating the behavior of ResNet-50 and a hybrid ResNet + Vision Transformer (ViT) design. A specially gathered image database with 15,200 training images and 3,800 validation images spanning 38 classes across multiple crops, including tomato, apple, grape etc. were subjected to preprocessing steps such as resizing, normalization, and data augmentation to enhance model robustness. Multiple architectures, including ResNet-50, MobileNetV2, and EfficientNet-B0, were trained and compared with the hybrid ResNet + ViT model. All models were fine-tuned using the AdamW optimizer and cross-entropy loss, with early stopping applied to prevent overfitting and ensure generalization. Furthermore, interpretability techniques such as Grad-CAM and saliency maps were implemented to indicate disease-relevant regions, while segmentation-based analysis was performed to identify the affected parts of a leaf. For every one of the considered architectures, ResNet-50 led to the highest accuracy of 98.74%, whereas the hybrid ResNet + ViT model achieved a competitive accuracy of 98.58%, showing that the hybrid architectures were effective in capturing both local and overall information. The experimental results showcase the promise of transformer-based models to achieve highly accurate, interpretable, and computationally efficient computer-based multi-class multi-disease classification systems, providing helpful assistance for cultivation management practices as well as for precision farming.

04.
bioRxiv (Bioinfo) 2026-06-14

TopoMIL: Topology Improves Multiple Instance Learning in Diagnostic Microscopic Images

Microscopic images of cells and tissues are central to disease diagnosis. In computational pathology, multiple instance learning (MIL) has emerged as a key paradigm for analyzing numerous images within a single patient sample. While the representative distribution of cells in a sample is important for diagnosis, existing MIL frameworks largely overlook it. We introduce TopoMIL, a framework that extracts the representative topological structure of the sample and integrates it into the MIL classifier. Three topological representations are assessed, each with distinct advantages and computational costs. We evaluate TopoMIL on four histopathology and cytomorphology datasets, each presenting unique challenges. Integrating the sample's topological information into MIL enhances classification across average, max, attention-based, and transformer pooling, yielding AUCROC gains of 3.3%, 4.2%, 5.9%, and 0.5%, respectively, with moderate computational cost. Our work underscores the potential of TopoMIL as a scalable extension to existing morphology-based models in computational pathology.

05.
arXiv (CS.AI) 2026-06-15

StreamMemBench: Streaming Evaluation of Agent Memory for Future-Oriented Assistance

arXiv:2606.14571v1 Announce Type: new Abstract: A central role of personal-agent memory is to turn stored information and prior interactions into future-oriented assistance. In daily use, useful cues come from what the agent observes and how the user interacts with the agent, and the agent must carry them forward from the current request to similar future tasks. Existing memory benchmarks usually test dialogue recall or task improvement in isolation, leaving the trajectory from streaming observations to later assistance largely untested. We introduce StreamMemBench, a streaming benchmark that constructs a two-step task sequence around each evidence anchor from EgoLife egocentric streams. The initial task tests evidence use, while the follow-up task tests whether feedback and interaction experience are reused. Four metrics diagnose evidence recall, initial evidence use, feedback incorporation, and follow-up reuse. Experiments with eight memory systems across two backbones show that current systems often fail to use observed evidence or turn feedback into reliable follow-up behavior, even when evidence is stored or feedback is incorporated locally. StreamMemBench is publicly available at https://github.com/landian60/StreamMemBench.

06.
arXiv (CS.CV) 2026-06-16

HiRo: A Compact Four-Directional Hierarchical Reservoir Token-Mixer for Efficient Image Classification

Recent image classification models must balance local feature modeling, cross-window interaction, and parameter efficiency. Many high-performing architectures rely on fully trainable token-mixers, which improve representation learning but increase parameter count, optimization complexity and computational cost. We propose a parameter-efficient image classification model called HiRo that integrates shifted-window partitioning with multi-directional hierarchical reservoir computing. Images are divided into non-overlapping patches (treated as tokens), linearly projected, normalized, and enriched with 2D sinusoidal positional encodings, then processed within local windows. Inside each window, tokens are scanned in four directions and passed through a two-stage slice-and-mix reservoir module. In the first stage, directional sequences are split into contiguous slices, each processed by its own fixed reservoir with a trainable closed-loop readout. The resulting slice outputs are summarized using the start, end, and mean representations, and then mixed by a second-stage fixed reservoir for each direction. The mixed slice representations are expanded back to the token level and fused with the first-stage outputs, after which the four directional outputs are realigned and averaged. Consecutive blocks alternate between regular and shifted windows to enable cross-window interaction, followed by layer normalization, a residual feed-forward network, and global pooling for classification. This design combines regular and shifted window partitioning with hierarchical multi-directional reservoirs to make an efficient local-to-cross-window token-mixing framework for image classification. Despite using under 1M trainable parameters and significantly lower memory and time than transformer-style baselines, HiRo also achieves 99.46%, 85.57%, and 59.10% accuracy on MNIST, CIFAR-10, and CIFAR-100, respectively.

07.
arXiv (CS.CV) 2026-06-17

Contactless Respiratory Monitoring on Heterogeneous Mobile Robots: A Multimodal Edge-Computing Framework

Respiratory-rate (RR) monitoring is a critical component of remote triage and victim assessment in emergency response, disaster recovery, and infectious-disease scenarios, where minimizing physical contact can reduce responder risk and improve operational safety. However, field deployment of contactless RR monitoring remains challenging due to variable illumination, posture changes, platform heterogeneity, and the impracticality of wearable sensors in hazardous environments. In this paper, we present a modality-adaptive contactless RR monitoring framework for heterogeneous mobile robots with onboard edge computing. The proposed system combines brightness-adaptive sensor selection across RGB, thermal, near-infrared (NIR), and low-light cameras, keypoint-guided chest ROI extraction for posture-robust monitoring, and a signal-quality-index (SQI)-based filtering mechanism for reliable respiratory estimation. We implement and evaluate the framework on three robotic platforms spanning quadruped and wheeled locomotion and multiple edge-computing architectures. Experiments conducted across diverse lighting conditions, subject poses, and robot-to-subject distances demonstrate that the framework generalizes across platforms without per-platform algorithmic retuning, while revealing modality-specific operational boundaries. RGB provides the broadest coverage up to 8m, NIR remains effective up to 6m, thermal is reliable only at short range, and low-light sensing supports monitoring in complete darkness up to 8m. Overall, the results demonstrate the feasibility of multimodal contactless RR monitoring on mobile robots and support its use as a foundation for autonomous triage and victim assessment in hazardous search-and-rescue settings.

08.
arXiv (CS.CV) 2026-06-16

DreamX-World 1.0: A General-Purpose Interactive World Model

DreamX-World 1.0 is a general-purpose interactive text/image-to-video world model for controllable long-horizon generation. It supports camera navigation, revisits to previously observed regions, and promptable events across photorealistic, game-style, and stylized domains. Our data engine combines camera-accurate Unreal Engine rendering, action-rich gameplay recordings, and real-world videos with recovered camera geometry. For camera control, we introduce E-PRoPE, a lightweight variant of projective positional encoding that retains PRoPE's projective camera geometry while applying camera-aware attention to spatially reduced tokens. We convert a bidirectional video generator into a few-step autoregressive world model using causal forcing, DMD-style distillation, and long-rollout training. Training on self-generated long-horizon contexts exposes the model to its own generated history and reduces the style and color drift that accumulates across autoregressive chunks. Memory-Conditioned Scene Persistence retrieves earlier views through camera-geometry-based retrieval, while residual recycling makes the conditioning path less sensitive to imperfect memory latents. Event Instruction Tuning adds composable event control, and reinforcement learning alignment recovers camera control and visual quality after distillation. With mixed-precision DiT execution, residual reuse, 75\%-pruned VAE decoding, and asynchronous pipeline parallelism, DreamX-World 1.0 reaches up to 16\,FPS on eight RTX\,5090 GPUs. On our 5-second basic evaluation, DreamX-World 1.0 achieves a camera-control score of 73.75 and an overall score of 84.76, outperforming HY-WorldPlay 1.5 and LingBot-World in overall score, which achieve 80.79 and 80.45, respectively.

09.
arXiv (CS.CV) 2026-06-16

Light Forcing: Accelerating Autoregressive Video Diffusion via Sparse Attention

Advanced autoregressive (AR) video generation models have improved visual fidelity and interactivity, but the quadratic complexity of attention remains a primary bottleneck for efficient deployment. While existing sparse attention solutions have shown promise on bidirectional models, we identify that applying these solutions to AR models leads to considerable performance degradation for two reasons: isolated consideration of chunk generation and insufficient utilization of past informative context. Motivated by these observations, we propose \textsc{Light Forcing}, the first sparse attention solution tailored for AR video generation models. It incorporates a Chunk-Aware Growth mechanism to quantitatively estimate the contribution of each chunk, which determines their sparsity allocation. This progressive sparsity increase strategy enables the current chunk to inherit prior knowledge in earlier chunks during generation. Additionally, we introduce a Hierarchical Sparse Attention to capture informative historical and local context in a coarse-to-fine manner. Such two-level mask selection strategy (i.e., frame and block level) can adaptively handle diverse attention patterns. Extensive experiments demonstrate that our method outperforms existing sparse attention in quality (e.g., 84.5 on VBench) and efficiency (e.g., $1.2{\sim}1.3\times$ end-to-end speedup). Combined with other efficient solutions, \textsc{Light Forcing} further achieves a $2.0{\sim}3.0\times$ end-to-end speedup across diverse GPUs (e.g., 27.4\,FPS on RTX 5090 and 33.9\,FPS on H100). Code is released via this \href{https://github.com/chengtao-lv/LightForcing}{link}.

10.
arXiv (CS.CV) 2026-06-17

R1-SyntheticVL: Is Synthetic Data from Generative Models Ready for Multimodal Large Language Model?

In this work, we aim to develop effective data synthesis techniques that autonomously synthesize multimodal training data for enhancing MLLMs in solving complex real-world tasks. To this end, we propose Collective Adversarial Data Synthesis (CADS), a novel and general approach to synthesize high-quality, diverse and challenging multimodal data for MLLMs. The core idea of CADS is to leverage collective intelligence to ensure high-quality and diverse generation, while exploring adversarial learning to synthesize challenging samples for effectively driving model improvement. Specifically, CADS operates with two cyclic phases, i.e., Collective Adversarial Data Generation (CAD-Generate) and Collective Adversarial Data Judgment (CAD-Judge). CAD-Generate leverages collective knowledge to jointly generate new and diverse multimodal data, while CAD-Judge collaboratively assesses the quality of synthesized data. In addition, CADS introduces an Adversarial Context Optimization mechanism to optimize the generation context to encourage challenging and high-value data generation. With CADS, we construct MMSynthetic-20K and train our model R1-SyntheticVL, which demonstrates superior performance on various benchmarks.

11.
PLOS Computational Biology 2026-06-02

Linking reduced prefrontal microcircuit inhibition in schizophrenia to EEG biomarkers in silico

by Sana Rosanally, Frank Mazza, Heng Kang Yao, Faraz Moghbel, Hannah Seo, Etay Hay Reduced cortical inhibition by parvalbumin-expressing (PV) interneurons in schizophrenia is thought to be associated with impaired processing in the prefrontal cortex and altered EEG signals such as oddball mismatch negativity (MMN). Recent studies also suggest loss of somatostatin (SST) interneuron inhibition. However, establishing the link between reduced interneuron inhibition and reduced MMN experimentally in humans is currently not possible. To overcome these challenges, we simulated spiking activity and EEG during baseline and oddball response in detailed models of human prefrontal microcircuits in health and schizophrenia, with reduced PV and SST interneuron inhibition as constrained by postmortem patient data. We showed that reduced PV interneuron inhibition can account for the decreased MMN amplitude seen in schizophrenia, with a threshold below which the amplitude effect was low as seen in at-risk patients. In contrast, reduced SST interneuron inhibition did not affect the MMN amplitude. We further showed that both types of inhibition loss were necessary to account for changes in resting EEG in schizophrenia, with reduced SST interneuron inhibition increasing broadband power, and reduced PV and SST interneuron inhibition both leading to a right shift from alpha to beta frequencies. Our study thus links reduced PV and SST interneuron inhibition in schizophrenia to distinct EEG biomarkers that can serve to improve stratification and early detection using non-invasive brain signals.

12.
arXiv (CS.AI) 2026-06-18

SwitchBraidNet: Quantisation-Aware Lightweight Architecture for Hybrid Brain-Computer Interface

arXiv:2606.18816v1 Announce Type: cross Abstract: Hybrid brain-computer interfaces (BCIs) that integrate motor imagery (MI) and steady-state visual evoked potentials (SSVEP) provide high-dimensional neural decoding but typically exceed the computational limits of embedded hardware. To address this, we propose SwitchBraidNet, a compact EEG classification architecture designed for low-power deployment. The model employs a dual-path temporal braid to extract multiscale oscillatory features, an adaptive squeeze-and-excitation spatial switch for electrode gating, and a log-variance readout layer for direct band-power encoding. Furthermore, through systematic quantisation-aware training on the OpenBMI dataset, we compared SwitchBraidNet against four established baselines across FP32, FP16, and INT8 precisions. Experimental results demonstrate superior efficiency and performance, achieving MI accuracy of 69.49% (FP16), SSVEP accuracy of 93.48% (FP32), and a hybrid information transfer rate of 64.82 bits/min (FP16). With an INT8 footprint of only 3.03 KB, SwitchBraidNet maintains high accuracy across varying numerical precisions, demonstrating its suitability for low-power embedded BCI deployment.

13.
arXiv (CS.AI) 2026-06-17

Learning to Decide with AI Assistance under Human-Alignment

arXiv:2605.12646v2 Announce Type: replace-cross Abstract: It is widely agreed that when AI models assist decision-makers in high-stakes domains by predicting an outcome of interest, they should communicate the confidence of their predictions. However, empirical evidence suggests that decision-makers often struggle to determine when to trust a prediction based solely on this communicated confidence. In this context, recent theoretical and empirical work suggests a positive correlation between the utility of AI-assisted decision-making and the degree of alignment between the AI confidence and the decision-makers' confidence in their own predictions. Crucially, these findings do not yet elucidate the extent to which this alignment influences the complexity of learning to make optimal decisions through repeated interactions. In this paper, we address this question in the canonical case of binary predictions and binary decisions. We first show that this problem is equivalent to a two-armed online contextual learning problem with full feedback, and establish a lower bound of $\Omega (\sqrt{|H| \cdot |B| \cdot T} )$ on the expected regret any learner can attain, where $H$ and $B$ denote the sets of human and AI confidence values. We then demonstrate that, under perfect alignment between AI and human confidence, a learner can attain an expected regret of $O(\sqrt{|H| \cdot T\log T})$ and, when $\sqrt{|H|} = O(\log T)$ and $B$ is countable, a non-trivial generalization of the Dvoretzky-Kiefer-Wolfowitz inequality improves the regret bound to $O(\sqrt{T\log T})$. Taken together, these results reveal that alignment can reduce the complexity of learning to make decisions with AI assistance. Experiments on real data from two different human-subject studies where participants solve simple decision-making tasks assisted by AI models show that our theoretical results are robust to violations of perfect alignment.

14.
arXiv (CS.LG) 2026-06-16

TriAdReview: Triangular Adversarial Review Architecture for Multi-Model Technical Document Generation

arXiv:2606.15074v1 Announce Type: new Abstract: Large language models (LLMs) are increasingly used for technical document generation, yet single-model outputs often suffer from over-engineering, security blind spots, and incomplete coverage. We propose TriAdReview, a triangular adversarial review architecture that employs two independent reviewer models (engineering and boundary perspectives) and a triangular judging mechanism to iteratively improve a generator model's output. We evaluate TriAdReview across five benchmark tasks - architecture design, code generation, proposal review, security audit, and requirements analysis - using three configurations: single model (baseline), dual model (single review), and triple model (full system). Results across 75 experiments (n=5 per cell) show that the triple model configuration achieves a 10.1% overall improvement over the single model baseline (26.2 vs. 23.8 out of 50; p

15.
arXiv (CS.CV) 2026-06-17

Disentangling Perception and Reasoning in Multimodal LLMs via Reward Design

Reinforcement learning with verifiable rewards has driven major gains in LLM reasoning, and it is intuitive to assume this recipe will transfer well to multimodal models. However, multimodal models do two things: first, perceive what is in an image, then reason about what it implies. Because these stages are graded jointly, it is hard to tell how much room reasoning alone has to grow. We study this on algorithmic visual puzzles, where both components are necessary and show that perception, not reasoning, is the binding constraint. Replacing images with simple textual descriptions raises performance by over 20 points on average for Claude models. We then evaluate six reward designs aimed at inducing visual grounding during reasoning without chain-of-thought supervision. Training Qwen-2.5-VL-7B with GRPO, reward design induces long, structured reasoning with self-reflection and visual references, yielding a 5.56-point gain over the base model. These gains are, however, uneven; no single reward improves all categories, and rewards with verifiable accuracy signals trade out-of-domain transfer for in-domain accuracy. These results point to perception-aware reward design as a path forward, so that signals correct perception at its source rather than the reasoning that inherits its errors.

16.
arXiv (CS.CV) 2026-06-16

V2P-Manip: Learning Dexterous Manipulation from Monocular Human Videos

Achieving autonomous robotic dexterous manipulation requires precise, human-like action sequences at scale. As a scalable supplement to costly teleoperation data, extracting trajectories with both visual fidelity and physical plausibility from monocular videos represents a promising frontier in embodied AI. To this end, we introduce V2P-Manip, an efficient framework designed to learn dexterous manipulation policies directly from human demonstration videos. We establish an efficient, integrated pipeline encompassing 3D asset acquisition, trajectory estimation, and dexterous policy learning. To bridge the gap between visual perception and physical constraints, we introduce a two-stage refinement process to enforce spatial alignment and physical consistency. Evaluations on the TACO and OakInk benchmarks demonstrate that our approach significantly outperforms previous methods in pose accuracy, adaptability to unstructured environments, and training efficiency. Ultimately, experimental results confirm an average success rate of over 75% across multiple synthetic manipulation tasks and validate the adaptability of the extracted manipulation priors across diverse dexterous hand embodiments.

17.
arXiv (CS.CL) 2026-06-17

findsylls: A Language-Agnostic Toolkit for Syllable-Level Speech Tokenization and Embedding

Syllable-level units offer compact and linguistically meaningful representations for spoken language modeling and unsupervised word discovery, but research on syllabification remains fragmented across disparate implementations, datasets, and evaluation protocols. We introduce findsylls, a modular, language-agnostic toolkit that unifies classical syllable detectors and end-to-end syllabifiers under a common interface for syllable segmentation, embedding extraction, and multi-granular evaluation. The toolkit implements and standardizes widely used methods (e.g., Sylber, VG-HuBERT) and allows their components to be recombined, enabling controlled comparisons of representations, algorithms, and token rates. We demonstrate findsylls on English and Spanish corpora and on new hand-annotated data from Kono, an underdocumented Central Mande language, illustrating how a single framework can support reproducible syllable-level experiments across both high-resource and under-resourced settings.

18.
arXiv (math.PR) 2026-06-16

A Machine-Checked Itô Calculus for Brownian Motion

arXiv:2606.15089v1 Announce Type: cross Abstract: We present a machine-checked development of the $L^2$ Itô calculus of Brownian motion on a bounded time interval $[0,T]$, formalized in Lean 4 on top of Mathlib and the BrownianMotion package. The development contains: the construction of the Itô integral as an isometry of Hilbert spaces, from a predictable-rectangle $\pi$-system through the density of simple adapted processes; the Itô integral as a process, proved to be an $L^2$-continuous martingale through a single structural identity (the integral at time $t$ is the conditional-expectation projection of its terminal value onto $\mathcal{F}t$), from which adaptedness, the martingale property, the contraction bound, and both the terminal and the time-indexed Itô isometries follow as corollaries; and Itô's formula for $C^3$ functions with bounded derivatives, including its time-dependent form $df = f_x,dB + (f_t + \tfrac12 f{xx}),dt$, obtained by a discrete-to-continuous argument through weighted quadratic variation and explicit $L^2$ remainder bounds. To our knowledge this includes the first machine-checked proof of Itô's formula, and the first machine-checked construction of the Itô integral as a martingale-valued process, in any proof assistant. We are deliberate about the boundary: the theory is the $L^2$ theory on $[0,T]$ with bounded-derivative integrand classes; localization to the unrestricted $C^2$ formula, integrators beyond Brownian motion, and pathwise statements are out of scope, and we say precisely why and where. The development is roughly 7,200 lines of Lean across 22 modules; every theorem is sorry-free, the axioms of each headline result are pinned to Mathlib's classical defaults by a build-enforced gate, and the whole is reproducible from a pinned toolchain.

19.
arXiv (math.PR) 2026-06-15

Laws of Large Numbers for Non-Independent Random Variables on Hyperspaces with respect to the Hausdorff Metric

arXiv:2011.07199v5 Announce Type: replace Abstract: This paper investigates the limit behavior of the Minkowski sums for sequences of set-valued random variables. When the underlying space is finite dimensional, by using the support function, we establish the weak and strong laws of large numbers for non-independent random variables in the hyperspace with respect to the Hausdorff metric $d_H$.

20.
arXiv (CS.AI) 2026-06-11

LSTM based IoT Device Identification

arXiv:2304.13905v2 Announce Type: replace-cross Abstract: While the use of the Internet of Things is becoming more and more popular, many security vulnerabilities are emerging with the large number of devices being introduced to the market. In this environment, IoT device identification methods provide a preventive security measure as an important factor in identifying these devices and detecting the vulnerabilities they suffer from. In this study, we present an end-to-end machine learning pipeline that identifies IoT devices in the Aalto university dataset (IoT devices captures) using Long Short-Term Memory (LSTM) networks. Raw network packet captures (PCAP) are processed into 25 engineered features, which are then arranged as sliding-window time-series sequences. We systematically evaluate sequence lengths from 2 to 20, reporting that performance improves approximately linearly up to length 6 and thereafter in a wave-like pattern, reaching its peak at length 18. On the final held-out test set with the optimal configuration, the model achieves an accuracy of 79.85% and a macro-averaged F1-score of 75.70% across 27 device classes.

21.
arXiv (CS.AI) 2026-06-15

AI Receptivity or AI Adoption Breadth? A Tool-Specific Reanalysis of the Lower-Literacy/Higher-Usage Link

arXiv:2606.13734v1 Announce Type: new Abstract: Recent evidence reported by Tully, Longoni, and Appel (2025) suggests that lower artificial intelligence (AI) literacy predicts greater receptivity toward AI. We revisit this claim using the public data from Study 3 of that article, which measures past usage of five AI tool categories on a five-point frequency scale. We first reproduce the negative association between AI literacy and aggregate AI usage using OLS on participant-level averages, binary logit, ordered logit, and multinomial logit specifications. We then show that the aggregate relationship masks substantial heterogeneity by tool type. In our demographic-adjusted primary specification, AI literacy does not significantly predict text AI usage (ordered-logit $\beta$ = -0.090, p = .387), whereas it remains a strong predictor of non-text AI adoption ($\beta$ = -0.377, p < .001). The non-text effect is also robust under Tully et al.'s original Study 3 control specification ($\beta$ = -0.502, p < .001). Binary, ordered-logit, and multinomial specifications suggest that the non-text relationship is primarily an adoption/non-adoption pattern rather than evidence of intensive use: the demographic-adjusted odds ratio of ever having used a non-text AI tool is 0.68. Thus, in the study that measures self-reported past usage rather than stated preferences, the evidence does not support a simple claim that lower AI literacy predicts greater receptivity to AI in general. It points instead to a narrower pattern of broader adoption across lower-penetration, non-text AI tools.

22.
arXiv (CS.CL) 2026-06-11

SAGE: Answer-Conditioned Uncertainty Targets for Verbal Uncertainty Alignment

Large language models increasingly express uncertainty through natural-language statements, yet these expressions often fail to reflect the model's sampled behavior. We study verbal uncertainty alignment as a distributional calibration problem: the appropriate uncertainty target for a prompt should be estimated from repeated model outputs rather than from an isolated response. However, group rollouts alone are insufficient, since the resulting target must provide a useful training signal. Existing targets only partially satisfy this requirement. We propose SAGE, Semantic-Answer Guided Entropy, a group-level uncertainty target that constructs an answer-conditioned uncertainty geometry over sampled responses. SAGE preserves categorical, numeric, and symbolic answer distinctions while maintaining a smooth and scale-preserving calibration signal. We further apply this target through Group-Uncertainty Preference Optimization, or GUPO, an uncertainty-channel training framework that supervises verbal uncertainty expressions rather than the full response. Experiments across factual, mathematical, and multiple-choice reasoning tasks show improved uncertainty ranking, lower calibration error, and reduced overconfidence.

23.
arXiv (CS.CL) 2026-06-16

S1-DeepResearch: Beyond Search, Toward Real-World Long-Horizon Research Agents

Deep research agents aim to solve complex knowledge-intensive tasks through long-horizon planning, evidence gathering, reasoning, and report generation. While recent progress in search agents has demonstrated strong capabilities in information retrieval and answer verification, most existing training datasets remain search-centric, focusing primarily on closed-ended question answering and information localization. As a result, they mainly train information-seeking behavior while providing limited coverage of key deep research capabilities, including evidence integration, knowledge synthesis, planning, file understanding, and structured report generation. In this work, we propose a unified trajectory construction paradigm for deep research agents that combines closed-ended QA and open-ended exploration. The proposed framework consists of graph-grounded task formulation, agentic trajectory rollout, and multi-dimensional trajectory verification, enabling scalable synthesis of high-quality agentic trajectories spanning long-chain complex reasoning, deep research instruction following, report writing, file understanding and generation, and skills usage. Compared with existing search-oriented datasets, our synthesized trajectories place greater emphasis on knowledge synthesis, complex reasoning, and planning. S1-DeepResearch-32B achieves state-of-the-art performance among open-source models of comparable scale across 20 benchmarks spanning five capability dimensions, including complex reasoning, instruction following, report generation, file understanding, and skills usage. On several challenging deep research benchmarks, it approaches the performance of leading proprietary frontier models. These results highlight the importance of jointly modeling information acquisition, knowledge synthesis, and planning-oriented agent behaviors for building effective deep research agents.

24.
arXiv (quant-ph) 2026-06-17

Universal features of high-energy scattering of Laguerre-Gaussian states

arXiv:2604.00575v2 Announce Type: replace-cross Abstract: Vortex states of photons, electrons, and other particles are wave packets that carry intrinsic orbital angular momentum (OAM) and exhibit other features unavailable for plane waves. Collisions of high-energy vortex states can become a promising tool for nuclear and particle physics, once experimental challenges are overcome. An extensive literature exists on scattering processes involving vortex states; however, most works rely on assumptions that will be challenging to achieve in experiment. In this work, we initiate a systematic re-analysis of vortex-state scattering processes using paraxial Laguerre-Gaussian (LG) wave packets colliding at a non-zero impact parameter $b$. Since the total final transverse momentum $P_\perp$ is no longer fixed, we focus on how the differential cross section depends on $P_\perp$. We emphasize that non-trivial $P_\perp$-dependent features can originate either from the shape of the LG wave packets or from the dynamics of the scattering process under interest. Here, we focus on the former source and explore in detail these universal kinematic features, while the study of process-specific modifications, along with the novel insights they may bring, is delegated to a future work. Interestingly, the non-zero impact parameter $b$ plays a key role in many $P_\perp$-dependent effects, making it a useful probe of vortex states, not a nuisance factor as often assumed.

25.
PLOS Computational Biology 2026-06-01

BeetleAtlas 2: An enhanced <i>Tribolium castaneum</i> web resource for tissue and developmental transcriptomics allowing refinement of gene predictions

by David P. Leader, Muhammad T. Naseem, Janina L. Rinke, Kenneth Veland Halberg BeetleAtlas is an online resource for tissue- and stage-specific transcriptomics in the red flour beetle, Tribolium castaneum. On updating from the original Tcas5.2 genome assembly to the more recent improved icTriCast1.1 genome assembly it became evident that there were major discrepancies between the gene models of the two genome annotations in use: the OGS3 and the NCBI gene sets. As neither was clearly superior we implemented a new design in BeetleAtlas 2 (beetleatlas.org) comprising two parallel ‘modes’ — one incorporating results using the NCBI gene models and a second incorporating those using the OGS3 gene models. This allows direct comparison where equivalent gene models exist: 50–57% of cases. To aid resolution of discrepancies between the two gene model sets and verification of results, gene models are linked to a custom visualization of RNA-seq read coverage of the genome in the UCSC Genome Browser. This displays reads from 22 tissues and life stages superimposed on the icTriCast1.1 genome assembly. Reference tracks show the NCBI gene models, the OGS3 gene models after translation of their coordinates from the Tcas5.2 assembly, and 1050 discontinued NCBI gene models from the previous assembly after a similar transfer of coordinates. We document various situations in which distinct patterns of expression of the tissues can be used to confirm and extend correlations between the two gene sets, resolve discrepancies between them, make corrections and identify putative genes or exons absent from the current gene sets. BeetleAtlas 2 allows those involved in Tribolium research to avoid the pitfalls inherent in incorrect gene models when planning experiments on specific genes and interpreting the results. It also demonstrates how BeetleAtlas 2 might play an important role in establishing a revised gene set for Tribolium castaneum in the future.