Academic Intelligence · Curated Daily

探索全球前沿学术脉络

AcademicHub 汇聚顶级期刊与预印本平台的实时文献。定制您的专属科研雷达,利用大语言模型自动生成交叉领域文献分析简报。

01.
medRxiv (Medicine) 2026-06-15

Artificial Intelligence-Based Detection of Airway Mucus Plugs on CT and Associations With Clinical Outcomes in COPDGene

RATIONALE: Airway mucus plugging is a clinically relevant manifestation of airway pathology in chronic obstructive pulmonary disease (COPD) and is associated with increased mortality even in early disease; however, visual computed tomography (CT) assessment is subjective and labor intensive. OBJECTIVES: To develop an AI-based quantitative CT method for automated detection of airway mucus plugging and evaluate associations with physiologic impairment and clinical outcomes. METHODS: Inspiratory CT scans from 8,971 COPDGene Phase 1 (GOLD 0-4 and PRISm) participants were analyzed. An AI-based framework combining 3D airway segmentation discontinuities and convolutional neural network classification identified mucus plug obstructions, yielding mucus plug burden (total plug count). Associations with outcomes were evaluated using covariate-adjusted models. MEASUREMENTS AND MAIN RESULTS : Higher mucus plug burden was associated with lower post-bronchodilator FEV % predicted ({rho} = -0.41; P < 0.001), greater air trapping (LAA < -856 HU; {rho} = 0.33; P < 0.001), worse health status (SGRQ; {rho} = 0.31; P < 0.001), and shorter 6-minute walk distance ({rho} = -0.26; P < 0.001). Among GOLD 1-4 participants, mucus plug presence was independently associated with increased all-cause mortality (adjusted hazard ratio, 1.28; P < 0.005) and exacerbation frequency (adjusted incidence rate ratio, 1.32; P < 0.005). Plug presence was also associated with increased respiratory mortality across GOLD categories and cardiovascular mortality in GOLD 1-2. CONCLUSIONS: AI-based quantitative CT assessment of airway mucus plugging provides a scalable, reproducible measure associated with physiologic impairment and adverse outcomes in COPD, supporting its role in risk stratification and future therapeutic studies.

02.
arXiv (CS.CV) 2026-06-17

Pareto LoRA: Mitigating Modality Imbalance in Unified Multimodal Models via Pareto-Optimal Gradient Integration

Unified multimodal models (UMMs) have recently emerged as a promising paradigm for integrating multimodal understanding and generation within a single autoregressive transformer. However, during multimodal instruction tuning, these models often exhibit pronounced modality imbalance: language gradients dominate optimization, thus leading to lower image generation quality, especially under parameter-efficient fine-tuning such as LoRA. In this work, we systematically analyze modality imbalance in LoRA-based fine-tuning of UMMs for interleaved text-image generation. We show that vision modality performance degrades substantially more than text modality performance when compared to unimodal counterparts, and that modality-specific gradients can differ by orders of magnitude across various tasks and layers. Motivated by this observation, we reformulate the multimodal instruction tuning as a bi-objective optimization problem and propose Pareto LoRA, a Pareto-optimal gradient integration strategy that balances the text and image objectives by modulating the gradient direction and strength. Experiments on the CoMM benchmark with Emu2 demonstrate that Pareto LoRA consistently improves multimodal generation balance, achieving up to 44.9% gains in perceptual image quality over vanilla LoRA while maintaining comparable text performance.

03.
arXiv (CS.AI) 2026-06-11

Sparsified Kolmogorov-Arnold Networks for Interpretable Quantum State Tomography

arXiv:2606.11814v1 Announce Type: cross Abstract: Machine-learning approaches to quantum state tomography can achieve high reconstruction fidelity, but the physical structure used by the trained model often remains implicit. Here we ask whether a sparsified Kolmogorov-Arnold Network (KAN) can be used not only as a regressor, but also as an inspectable reconstruction rule whose internal organization can be checked against known Pauli structure. We study a controlled three-qubit GHZ-family benchmark in which all 63 non-identity Pauli expectation values are used to reconstruct three GHZ-subspace variables: the population imbalance $z$, the real off-diagonal component $c$, and the imaginary off-diagonal component $s$. Under finite-shot sampling and depolarizing noise, external ablation identifies the extended 12-channel GHZ-relevant Pauli set from the 63 measurements, with exact top-12 recovery across the tested shot counts and depolarizing-noise strengths. These support patterns remain stable across multi-seed random-initialization and noise-level analyses, and collapse under random-label controls. The dominant pruned input-hidden-output pathways organize Z-type population observables and X/Y off-diagonal observables in a pattern consistent with the analytic GHZ Pauli grouping, and sparse formula recovery recovers the canonical signed Pauli relations. The contribution of the KAN is therefore pathway-level structural interpretability within a neural reconstruction model, rather than superior sparse regression. Together with negative controls, these probes provide a consistency chain for auditing learned reconstruction rules against known physical structure.

04.
arXiv (CS.LG) 2026-06-18

Toward Simultaneously Optimal Regret in U-Calibration

arXiv:2606.18527v1 Announce Type: cross Abstract: U-calibration studies online forecasting algorithms whose predictions can be consumed by any unknown downstream agent, guaranteeing sublinear regret simultaneously for all proper loss functions. Existing U-calibration algorithms achieve worst-case optimal $O(\sqrt{T})$ regret for every bounded proper loss, but they fail to adapt to easier losses: as we show, even for smooth losses such as squared loss, they incur $\Omega(\sqrt{T})$ regret instead of the optimal $O(\log T)$ regret. In this work, we show that this limitation is not inherent. Specifically, we design a single forecast algorithm that simultaneously achieves $\tilde O(\sqrt{T})$ regret for every bounded proper loss and $O(\log T)$ regret for every bounded smooth proper loss. More generally, our algorithm also attains logarithmic regret for losses that are smooth relative to the log-barrier, which include several non-Lipschitz examples. Our approach is based on a novel variant of Follow-the-Perturbed-Leader (FTPL) in which perturbations are applied directly in the prediction space using self-concordant noise. The resulting analysis also departs substantially from prior FTPL analyses due to the complex nature of this noise and may be of independent interest.

05.
arXiv (CS.CL) 2026-06-16

LLM-Powered Virtual Population for Demand Simulation and Pricing

We develop an LLM-powered virtual population model that simulates demand for pricing decisions, in settings where products are described by rich unstructured information, such as text descriptions and images, and where decision makers need not only mean-demand predictions but also uncertainty estimates for counterfactual prices. Our model represents exposed customers as draws from a finite mixture of customer personas. For each persona, product, and candidate price, an LLM elicits a persona-level purchase probability using both structured persona information and unstructured product information. These probabilities are aggregated through calibrated mixture weights to form a predictive distribution of aggregate demand. The resulting simulator can evaluate counterfactual prices under various pricing objectives, including expected revenue and risk-aware criteria such as conditional value at risk. We test the framework on an online H&M fashion dataset with product descriptions and images. The calibrated LLM-based simulator achieves the best overall predictive performance among the models considered, and supports sample-efficient pricing decisions. Our framework provides a practical way to use LLMs as demand simulators for products with limited historical demand data but rich product information. By producing a full predictive demand distribution rather than only a point forecast, it enables managers to compare candidate prices, quantify demand uncertainty, and choose prices that target either average-case revenue or risk-aware objectives.

06.
arXiv (CS.CV) 2026-06-16

Think Less, Act Early: Reinforced Latent Reasoning with Early Exit in Vision-Language-Action Models

Existing Vision-Language-Action (VLA) models predominantly rely on explicit Chain-of-Thought (CoT) reasoning to bridge perception and action. While effective, this paradigm suffers from high computational costs and error propagation in multi-step tasks. In this paper, we propose Adaptive Variable Alignment VLA (AVA-VLA), a novel Latent Reasoning VLA framework that models reasoning as a sequence of unobservable latent variables, bypassing the need for explicit text generation. However, latent trajectories are inherently susceptible to noise interference and misalignment with downstream objectives. To address this, we introduce a Reinforcement Learning-based Denoising mechanism that treats latent state generation as a sequential decision process, optimizing reasoning trajectories via task-level rewards. Furthermore, we incorporate an Early-Exit Strategy that adaptively terminates reasoning based on state confidence, enabling a dynamic trade-off between depth and efficiency. Extensive experiments on embodied decision benchmarks demonstrate that AVA-VLA achieves a 6x inference speedup over explicit CoT methods while attaining a 98.3% average success rate on LIBERO, improving both efficiency and long-horizon stability over full-reasoning baselines.

07.
arXiv (CS.LG) 2026-06-15

MOSIC: Model-Agnostic Optimal Subgroup Identification with Multi-Constraint for Improved Reliability

arXiv:2504.20908v3 Announce Type: replace Abstract: Current subgroup identification methods typically follow a two-step approach: first estimate conditional average treatment effects and then apply thresholding or rule-based procedures to define subgroups. While intuitive, this decoupled approach fails to incorporate key constraints essential for real-world clinical decision-making, such as subgroup size and propensity overlap. These constraints operate on fundamentally different axes than CATE estimation and are not naturally accommodated within existing frameworks, thereby limiting the practical applicability of these methods. We propose a unified optimization framework that directly solves the primal constrained optimization problem to identify optimal subgroups. Our key innovation is a reformulation of the constrained primal problem as an unconstrained differentiable min-max objective, solved via a gradient descent-ascent algorithm. We theoretically establish that our solution converges to a feasible and locally optimal solution. Unlike threshold-based CATE methods that apply constraints as post-hoc filters, our approach enforces them directly during optimization. The framework is model-agnostic, compatible with a wide range of CATE estimators, and extensible to additional constraints like cost limits or fairness criteria. Extensive experiments on synthetic and real-world datasets demonstrate its effectiveness in identifying high-benefit subgroups while maintaining better satisfaction of constraints.

08.
arXiv (CS.CL) 2026-06-16

MyPCBench: A Benchmark for Personally Intelligent Computer-Use Agents

Current benchmarks for computer-use agents evaluate models in impersonal environments. This leaves a gap between evaluation and deployment where personal assistants are expected to work across a user's whole digital life, including their context, historical data, and logged-in accounts. This gap is widest on web tasks, where live web evaluations cannot exercise sites that require logging in or personal information, the kind of site a real personal assistant has to drive. We introduce MyPCBench, which tests computer-use agents as personal assistants on a Linux desktop populated with 17 simulated real-world web applications and a full desktop stack, all seeded for one canonical persona, Michael Scott from The Office. We define 184 tasks in this environment, each inspired by a real request drawn from the OpenClaw community, and benchmark six closed and open-weight models with a uniform computer+bash tool surface. We find that the best model, Claude Opus 4.6, fully solves 55.4\% of the tasks, the only model above 50\%. Model failures cluster on tasks that span many applications and on long trajectories, where personalization stresses an assistant the most. We release the environment, task set, and agent harness at https://mypcbench.com.

09.
arXiv (CS.CL) 2026-06-19

DeepSeek-V4: Towards Highly Efficient Million-Token Context Intelligence

We present a preview version of DeepSeek-V4 series, including two strong Mixture-of-Experts (MoE) language models – DeepSeek-V4-Pro with 1.6T parameters (49B activated) and DeepSeek-V4-Flash with 284B parameters (13B activated) – both supporting a context length of one million tokens. DeepSeek-V4 series incorporate several key upgrades in architecture and optimization: (1) a hybrid attention architecture that combines Compressed Sparse Attention (CSA) and Heavily Compressed Attention (HCA) to improve long-context efficiency; (2) Manifold-Constrained Hyper-Connections (mHC) that enhance conventional residual connections; (3) and the Muon optimizer for faster convergence and greater training stability. We pre-train both models on more than 32T diverse and high-quality tokens, followed by a comprehensive post-training pipeline that unlocks and further enhances their capabilities. DeepSeek-V4-Pro-Max, the maximum reasoning effort mode of DeepSeek-V4-Pro, redefines the state-of-the-art for open models, outperforming its predecessors in core tasks. Meanwhile, DeepSeek-V4 series are highly efficient in long-context scenarios. In the one-million-token context setting, DeepSeek-V4-Pro requires only 27% of single-token inference FLOPs and 10% of KV cache compared with DeepSeek-V3.2. This enables us to routinely support one-million-token contexts, thereby making long-horizon tasks and further test-time scaling more feasible. The model checkpoints are available at https://huggingface.co/collections/deepseek-ai/deepseek-v4.

10.
arXiv (CS.AI) 2026-06-16

LearnOpt: Recovering the Latent Cognitive Structure of Standardized Examinations via Knowledge Graphs and Constrained Optimization

arXiv:2606.15349v1 Announce Type: cross Abstract: Standardized examinations are typically treated as uniform syllabus coverage problems. We argue they are better understood as adversarial systems with stable latent cognitive structures diverging systematically from official syllabi. We introduce LearnOpt, which recovers this structure from historical question papers and generates personalized, time-bounded study plans. Applied to nine years of NEET questions (2016-2024, n=1,496), LearnOpt builds an exam knowledge graph from LLM-tagged questions, extracts a five-category latent skill distribution, and formulates study planning as a knapsack-variant optimization over prerequisite-aware subgraphs with Bayesian Knowledge Tracing. Central finding: NEET's latent skill distribution is stable within a syllabus regime (consecutive-year KL divergence 0.004-0.032 for 2016-2021, non-significant under permutation testing) but shifts significantly with NCERT's 2023 syllabus rationalization: pooling 2016-2021 (n=1,072) vs 2023-2024 (n=392) gives KL=0.040 (p=0.0005), with Elimination/Negation questions rising from ~20-29% to ~31-35%. Latent structure, while not permanently stationary, is piecewise stable, with shifts detectable and attributable to curricular events. Within either regime, subject predicts skill profile more strongly than year. An optimization evaluation, using one real and two synthetic mastery profiles, shows the skill-weighted objective produces a modest but real reordering of recommended topics over a mastery-conditioned frequency baseline. Applying the pipeline to JEE Advanced reveals a profile dominated by Multi-concept Integration (80.9% vs. 33.3% for NEET), with a JEE-vs-NEET divergence (KL=0.505) exceeding NEET's largest cross-subject divergence: exam tier shapes latent cognitive structure more than subject, which shapes it more than time within a regime. Code, knowledge graph, and annotated dataset are released publicly.

11.
arXiv (CS.AI) 2026-06-17

ZIVARI-TLBO: A Zero-Cost Inter-Group Evaluated-Elite Relay Mechanism for Teaching-Learning-Based Optimization

arXiv:2606.17087v1 Announce Type: cross Abstract: ZIVARI-TLBO is a grouped Teaching-Learning-Based Optimization (TLBO) method that augments an existing population-state controller with a fixed inter-group evaluated-elite relay. At each scheduled event, every group offers its already evaluated elite to the next group in a fixed ring; the elite replaces the receiver's worst eligible learner only when its stored objective value is better. Because the exact relay copies an already evaluated solution and its stored fitness, it requires no additional objective-function calls. The frozen gts-v4-cm-fixed implementation is evaluated under equal 10,000-evaluation budgets on eight classical functions at dimensions 10, 30, 50, and 100, with 30 matched seeds, and on five constrained engineering problems. A direct ablation against the same grouped landscape-aware controller without relay records 728/11/221 wins/ties/losses and a rank-biserial effect size of 0.624 across dimensions. In an eight-method multidimensional comparison, WOA obtains the best average rank (2.914) and ZIVARI-TLBO ranks second (3.382); ZIVARI-TLBO significantly outperforms TLBO, MCTLBO, DE, PSO, and GWO, loses significantly to WOA, and is not significantly different from HHO after Holm adjustment. Feasibility-aware engineering results are mixed and sensitive to the current static-penalty formulation. The evidence supports a scoped relay contribution and budget-consistent information-sharing mechanism, but not universal state-of-the-art, global-convergence, engineering-dominance, or CEC superiority claims.

12.
arXiv (CS.CV) 2026-06-16

MVM-IOD: An Industrial Object-Centric Benchmark Dataset for the Evaluation of 3D Reconstruction Methods

3D object reconstruction, and camera pose estimation in industrial applications are challenging tasks, as errors are costly while the computation time is often limited. The complexity of typical industrial objects further complicates these tasks. Most of the existing datasets in this context do not depict realistic industrial scenarios. Therefore, we introduce the Machine Vision Metrology Industrial Object Dataset (MVM-IOD). Images of typical industrial objects are captured systematically, by moving a camera, mounted at the end effector of an industrial robot arm, on a hemisphere around the objects. MVM-IOD contains reference camera poses and reference 3D point clouds, the acquired RGB images of 9 objects and 2 background choices resulting in 18 scenes, which allows evaluation of all image based methods that compute a 3D reconstruction, camera poses, or novel views of a scene. Based on MVM-IOD, we extensively evaluate current SOTA 3D reconstruction and camera pose estimation methods, such as Structure from Motion, Multi-View Stereo, recent feed forward methods (Visual Geometry Grounded Transformer, {\pi}3), and 2D Gaussian Splatting and report our findings as a baseline for future research. The experiments show that capture setups like ours generate out-of distribution images for feed forward methods, leading to suboptimal point clouds and camera poses. However, these out-of-distribution images can be shifted closer to the training distribution by applying simple preprocessing steps. Consequently, in certain industrial applications, feed forward methods should be used with caution.

13.
arXiv (CS.CL) 2026-06-15

Simulating Students' Java Programming Errors with Large Language Models

Understanding student errors in the programming is a cornerstone of programming education, yet obtaining a representative set of student errors for any newly designed task remains slow and costly, since authentic submissions only accumulate after extensive classroom deployment. This paper explores whether large language models (LLMs) can serve as scalable proxies for students by simulating realistic logical errors in code submissions. Using the CodeWorkout dataset of 74,000+ unique student Java submissions across 37 problems, we evaluate five LLMs under three mainstream prompting strategies: Input-Output (IO), Chain-of-Thought (CoT), and iterative Self-Refine. We assess performance along two key dimensions: diversity (the range of distinct error patterns) and alignment (alignment with authentic student mistakes), and examine how these vary by struggling level of programming tasks. Our quantitative findings reveal that while all models generate diverse errors, their alignment to human submissions diverges: Claude Sonnet 4 achieves the most balanced performance. In addition, we conducted a blinded expert annotation study (N = 401) comparing synthetic and authentic errors. This qualitative analysis confirms that the generated errors are functionally indistinguishable from authentic student errors. Moreover, higher-struggling-level problems elicit more diverse but less student-like errors. These results highlight trade-offs in using LLMs to simulate human learners and suggest design considerations for integrating synthetic errors into teachable agents, intelligent tutoring systems, and large-scale learning analytics.

14.
arXiv (CS.LG) 2026-06-12

Strategic PAC Learnability via Geometric Definability

arXiv:2605.13426v3 Announce Type: replace Abstract: Strategic classification studies learning settings in which individuals can modify their features, at a cost, in order to influence the classifier's decision. A central question is how the sample complexity of the induced (strategic) hypothesis class depends on the complexities of the underlying hypothesis class and the cost structure governing feasible manipulations. Prior work has shown that in several natural settings, such as linear classifiers with norm costs, the induced complexity can be controlled. We begin by showing that such guarantees fail in general - even in simple cases: there exist hypothesis classes of VC dimension $1$ on the real line such that, even under the simplest interval neighborhoods, the induced class has infinite VC dimension. Thus, strategic behavior can turn an easy learning problem into a non-learnable one. To overcome this, we introduce structure via a geometric definability assumption: both the hypothesis class and the cost-induced neighborhood relation can be defined by first-order formulas over $\mathbb{R}_{\mathtt{exp}}$. Intuitively, this means that hypotheses and costs can be described using arithmetic operations, exponentiation, logarithms, and comparisons. This captures a broad range of natural classes and cost functions, including $\ell_p$ distances, Wasserstein distance, and information-theoretic divergences. Under this assumption, we prove that learnability is preserved, with sample complexity controlled by the complexity of the defining formulas.

15.
bioRxiv (Bioinfo) 2026-06-08

DipSkmer: Reference-free population genomics with diploid genome skims

Ecologists and conservation biologists rely on genetic diversity as a key essential biodiversity variable (EBV) used to track population health and dynamics, and utilize the population parameter {theta} (estimated by the average pairwise genomic distance) as a key metric of diversity. While whole-genome-sequencing (wgs) is increasingly affordable, it will be considerable time before the full diversity of life is represented by high-quality assembled genomes; even then, constant monitoring will still require repeated sampling of populations. In contrast, genome skimming (low-coverage, short-read wgs) is highly cost-effective but challenging to analyze because the coverage is too low for assembly and reliable error correction. Mature methods, such as Mash, exist for estimating pairwise genomic distances based on the Jaccard similarity of k-mer sets computed using sketching techniques. Some, such as Skmer, additionally model the impacts of low coverage. These methods have been successfully applied to assembly-free species identification and phylogenetics; however, their use in population genetics has been limited. This is because these methods implicitly treat genomes as haploid and heterozygosity confounds true estimates of genomic distance for diploid organisms. In this paper, we address this problem through a number of technical advances. First, we use coalescent theory to mathematically derive how the Jaccard index between two diploid samples changes with the scaled population size parameter ({theta}). Next, we derive an estimator that computes {theta} from the Jaccard index, in addition to several auxiliary variables, which we also estimate from the genome skims. The resulting method, DipSkmer, enables more accurate estimates of coverage, sequencing error, and pairwise nucleotide distance for diploid samples. Analyses of both simulated and empirical datasets show that for diploids and low distances (e.g.,

16.
arXiv (CS.LG) 2026-06-16

Tail-Shape Estimation in LLM Evaluation Is Fragile: A Protocol for Diagnosing False Positives

作者:

arXiv:2606.16511v1 Announce Type: new Abstract: Recent work motivates moving large language model (LLM) evaluation from mean-based to tail-aware metrics, including conditional value-at-risk and tail-index estimates of reward-model error. We ask whether the canonical extreme-value-theory tail-index parameter, which isolates how heavy a tail is from how large the tail mass is, adds discriminative information beyond the mean and a standard tail-magnitude statistic in LLM evaluation. We pre-register a protocol covering admissibility, goodness-of-fit, threshold-stability, and effect-size requirements for any positive tail-shape claim. The protocol is the contribution of this paper; the empirical study below is a demonstration of what its gates catch. Applied to a standard LLM toxicity-evaluation setup under two structurally different scorer families, the protocol catches three distinct modes of false positives that a naive analysis would have published, and rejects the headline tail-shape claim on both scorers. We conclude that tail-shape estimation in the LLM toxicity-evaluation setups we examined is more fragile than the recent literature suggests, and recommend the protocol as a starting point for tail-index claims in similar setups.

17.
medRxiv (Medicine) 2026-06-16

MRMU: A New Paradigm for Mendelian Randomization by Accounting for Measured Covariates and Unmeasured Confounders

Mendelian randomization (MR) is a powerful approach for causal inference, however, its reliability is frequently compromised by unadjusted covariates and unmeasured confounders, such as unmeasured pleiotropy and sample structure. To address these challenges, we introduce MRMU, a novel paradigm for the MR framework. Unlike traditional single-variable or multivariable MR methods, MRMU selects instrumental variables only from the exposure of interest and estimates one exposure effect at a time, while jointly accounting for measured covariates and unmeasured confounders. This design improves the reliability of MR analyses. In simulations and real data, MRMU achieved better type I error control, higher statistical power, and more accurate effect estimation than existing MR methods. Applying to coronary artery disease (CAD), MRMU identified robust cardiometabolic risk factors, including LDL-C, APOB, systolic blood pressure, body mass index, and smoking initiation, with consistent evidence across multiple CAD datasets. In contrast, traits such as HDL-C, height, and educational attainment, which were found to be significant by existing MR methods, were no longer supported by MRMU. MRMU further supported blood pressure-related traits, rather than lipid traits, as the more relevant pathway linking urate to CAD. Finally, by integrating large-scale plasma proteomics data, MRMU identified candidate CAD drug targets beyond established HMGCR- and PCSK9-related pathways, highlighting its utility for therapeutic target prioritization.

18.
arXiv (CS.AI) 2026-06-16

Can Artificial Intelligence Accelerate Technological Progress? Researchers' Perspectives on AI in Manufacturing and Materials Science

arXiv:2511.14007v3 Announce Type: replace-cross Abstract: Artificial intelligence (AI) raises expectations of substantial increases in rates of technological progress, but such anticipations are often not connected to detailed ground-level studies of AI use in innovation processes. Accordingly, it remains unclear how and to what extent AI can accelerate innovation. To help to fill this gap, we explore and assess results from 32 interviews with U.S.-based academic manufacturing and materials sciences researchers experienced with AI and machine learning (ML) techniques. We found that AI was primarily used for modeling of materials and manufacturing processes, facilitating cheaper and more rapid search of design spaces for materials and manufacturing processes alike. Benefits included cost, time, and computation savings in technology development. However, AI/ML tools were unreliable outside design spaces for which dense data were already available; they required skilled and judicious application in tandem with older research techniques; and concerns were raised about the potential to detrimentally circumvent opportunities for disruptive theoretical advancement. Based on these results, we suggest there is reason for optimism about acceleration in sustaining innovations through the use of AI/ML; but that support for conventional empirical, computational, and theoretical research is required to maintain the likelihood of further disruptive advances in manufacturing and materials.

19.
arXiv (CS.LG) 2026-06-18

Quantifying and Auditing LLM Evaluation via Positive–Unlabeled Learning

arXiv:2606.19057v1 Announce Type: cross Abstract: Large Language Models (LLMs) are increasingly used as judges for scalable evaluation, yet such LLM–as–a–Judge systems exhibit systematic biases that are decoupled from semantic quality, most notably verbosity bias. Meanwhile, human supervision is costly and typically selective, yielding reliable positive judgments but leaving most outputs unlabelled and potentially mixed in quality. We formulate LLM evaluation under selective human supervision as a positive–unlabelled learning problem and propose a geometric auditing framework based on Partial Optimal Transport. By aligning a small set of human–verified positives with a reliable subset of unlabelled outputs in a fixed embedding space, our method identifies human–consistent preferences and corrects biased judges without retraining. Experiments demonstrate improved alignment with human preferences, increased robustness to presentation biases, and interpretable confidence estimates, offering a scalable and statistically grounded alternative to existing LLM–as–a–judge pipelines.

20.
arXiv (CS.CL) 2026-06-19

DeXposure-Claw: An Agentic System for DeFi Risk Supervision

Decentralized finance exposes supervisors to fast-moving, networked credit risks. General-purpose LLM agents fit this setting poorly: they over-read weak evidence and recommend high-stakes interventions, while existing evaluations offer no regulator-aligned way to measure the resulting false alarms. We introduce DeXposure-Claw, a forecast-grounded agentic supervision system that routes LLM decisions through structured evidence: (1) DeXposure-FM, a graph time-series foundation model, forecasts future exposure networks; (2) deterministic monitors and stress scenarios then turn those forecasts into typed alerts, attribution signals, and scenario evidence; and (3) data-health and confidence gates constrain escalation before DeXposure-Claw emits auditable supervisory tickets with rationales. We further develop DeXposure-Bench, a six-axis evaluation harness, whose decision axis scores tickets against a regulator-aligned absolute-loss ground truth and an explicit false-intervention rate. Experiments on five years of weekly real data fully support our system. Code is at https://github.com/EVIEHub/DeXposure-Claw.

21.
arXiv (CS.AI) 2026-06-11

INFRAMIND: Infrastructure-Aware Multi-Agent Orchestration

arXiv:2606.11440v1 Announce Type: new Abstract: Existing multi-agent LLM orchestration methods, ranging from brute-force ensembles to learned routers, select models and topologies based on task and model features. However, these methods do not consider the runtime state of the serving infrastructure. On shared GPU clusters under concurrent load, this infrastructure blindness causes systematic resource underutilization: preferred models accumulate deep request queues while equally capable alternatives sit idle. In multi-agent pipelines, where each query triggers multiple sequential model calls, these delays then compound across every downstream step. Closing this gap is challenging because the relevant infrastructure signals (queue depths, KV-cache pressure, latencies) are dynamic and noisy, and they must drive three different decisions: planning, per-step routing, and scheduling. We introduce INFRAMIND, a framework that makes the entire multi-agent stack infrastructure-aware. An infra-aware planner conditions topology and role selection on real-time system load and remaining budget, biasing toward simpler graphs under congestion and richer ones at low load. An infra-aware executor then observes per-model queue depths, cache utilization, and response latencies at each agent step to decide which model to call and how deeply to reason; a budget-aware scheduler further reorders each model's queue so that urgent requests are served first. Cast as a hierarchical constrained MDP and solved end-to-end via reinforcement learning, the system learns to balance quality against latency automatically. Across five benchmarks, INFRAMIND delivers up to +7.6 pp accuracy over the prior baseline at low load with up to 7x lower latency, and sustains up to 99.9% SLO compliance under high load where every baseline drops below 50%.

22.
arXiv (CS.AI) 2026-06-16

On-Policy Distillation with Curriculum Turn-level Guidance for Multi-turn Agents

arXiv:2606.15912v1 Announce Type: cross Abstract: Multi-turn agents that plan, invoke tools, and interact with environments offer a promising paradigm for solving complex tasks, yet their capabilities typically rely on very large models whose inference cost is prohibitive in practice.On-Policy Distillation (OPD) is a natural recipe for transferring such capabilities to smaller students, but we find that it suffers a characteristic failure mode in this setting: small student errors compound across turns and push the trajectory out of the teacher's familiar state distribution, so the teacher's supervision becomes least reliable precisely where the student needs it most.We propose Guided On-Policy Distillation (Guided-OPD), a simple yet effective algorithm that mixes teacher- and student-generated turns within each rollout and schedules the teacher's intervention probability along a curriculum that decays to zero.Strong guidance keeps early trajectories close to the teacher distribution and is then gradually withdrawn to recover the purely on-policy regime used at inference.On ALFWorld, ScienceWorld, and WebShop, distilling Qwen3 students from a Qwen3-30B-A3B teacher, Guided-OPD improves Score by 21.1\% and Success Rate by 25.5\% over vanilla OPD on average, with larger gains on smaller students.

23.
medRxiv (Medicine) 2026-06-11

Long-term exposure to PM2.5 components and lipid profiles in WTC Health Program general responders

Fine particulate matter (PM2.5) was found to be associated with elevated blood lipids, but fewer studies have examined the associations with specific constituents of PM2.5. We studied the associations between exposure to annual PM2.5 and its 14 constituents, and repeated blood lipid measurements among general responders enrolled in the World Trade Center Health Program between 2003 and 2019 (n = 44,876). We used generalized additive mixed effect models to investigate the single-pollutant associations with repeated measures of blood total cholesterol (TC), high and low-density lipoprotein (HDL-C and LDL-C) levels. We then used linear generalized weighted quantile sum regression with a random intercept for participant ID to account for the clustering of repeated measures and evaluate the combined associations with the component mixture. A decile increase in the mixture of 14 PM2.5 chemical components was associated with 0.375 mg/dL increase in TC levels (95% confidence Interval (CI): 0.174-0.577) and 0.302 mg/dL increase in LDL-C (95% CI: 0.063, 0.540). Lead, organic carbon, and iron were major drivers of both associations. Component-specific models also show higher TC and LDL levels associated with interquartile range increases in organic carbon (0.472, 95% CI [0.027, 0.918] and 0.648 95% CI [0.136, 1.160]) and iron exposure (1.081, 95% CI [0.630, 1.532] and 0.748, 95% CI [0.318, 1.178]). In conclusion, we found PM2.5 exposure to be associated with elevated lipid levels. The associations differed by PM2.5 composition, highlighting organic carbon, lead, and iron and major drivers. These findings are highly significant for a population exposed to extreme air pollution event and susceptible to lipid alterations that might trigger cardiovascular events.

24.
arXiv (CS.LG) 2026-06-16

Semantic DLM+: Improving Diffusion Language Models through Bias-variance Trade-off in Transition Kernel Design

arXiv:2606.15327v1 Announce Type: new Abstract: Diffusion Language Models (DLMs) have demonstrated strong scaling capacity as alternatives to autoregressive language models. However, their performance is highly sensitive to the choice of transition kernels, and poorly designed kernels can lead to issues like training instability, slow convergence, and biased sampling. In this paper, we study this sensitivity through a principled analysis of generalization error and identify three critical factors: asymptotic bias (difficulty in approximating the posterior distribution), exposure bias (error propagation during sampling), and optimization variance induced by kernel dispersion. We further compare different transition kernels: masking diffusion yields sparse and easier posterior-approximation targets, while uniform diffusion provides stronger sampling-side repair but induces harder approximation. Motivated by this trade-off, we revisit a previously overlooked variant, semantic DLM (SemDLM), where the transition kernel corrupts tokens to neighborhoods that are semantically similar. Our theory suggests that SemDLM can serve as a plausible middle ground by reducing the posterior approximation difficulty of uniform diffusion while retaining repair ability. However, we find that SemDLM suffers from a semantic basin problem, where sampling repeatedly stays within a semantic region and produces low-diversity text. To address this, we propose SemDLM+, which adds a global transition and a semantic-frequency penalty during sampling. Experiments on LM1B and OpenWebText show that SemDLM+ improves training dynamics and achieves competitive language modeling and generation quality with satisfactory diversity.

25.
arXiv (CS.AI) 2026-06-16

LiteOdyssey: A Lightweight Reasoning AI Agent for Interpretable Rare-Disease Diagnosis

arXiv:2606.16149v1 Announce Type: new Abstract: Most medical AI systems improve by scaling additional machinery: more fine-tuning data, more agents, and/or larger retrieval databases. In rare-disease diagnosis, however, such scaling can produce systems that are difficult to deploy, audit, and maintain. We asked whether state-of-the-art diagnostic performance could instead be achieved by extending the reasoning chain of a single AI agent: guiding it with a diagnostic policy, developed through human-AI collaboration and augmenting with freely available biomedical tools. We introduce LiteOdyssey, a lightweight rare-disease diagnostic framework that guides reasoning language model through a clinical genetics workflow. This framework was developed through Policy Iteration with Human Feedback (PIHF) and uses dynamic access to public biomedical tools. On two challenging benchmarks that provide only patient clinical features, LiteOdyssey achieved state-of-the-art performance, with an overall disease Recall@1 of 59.3% over the combined 1,243 cases of LIRICAL (n = 370) and the PhenoPacket Store (n = 873). Both benchmarks have a high proportion of ultra-rare disease (a prevalence below 1 in 1,000,000, with ultra-rare shares of approximately 45% and 52.8%, respectively). On the more difficult PhenoPacket subset, where causal diseases were not mapped to Orphanet in our rarity-mapping pipeline, LiteOdyssey achieved 60.7% Recall@1, compared with 10.7% for the same baseline model (GPT-5.4) without tools. This performance was achieved without fine-tuning, multi-agent ensembles, or a large case-retrieval database. Gains were also observed in the following: on cases never seen during development, on a private cohort of real-world rare disease patients, and on a smaller open-weights model. LiteOdyssey suggests a path toward rare-disease AI systems that are accurate, easier to deploy, and more transparent for physician review.