Academic Intelligence · Curated Daily

探索全球前沿学术脉络

AcademicHub 汇聚顶级期刊与预印本平台的实时文献。定制您的专属科研雷达,利用大语言模型自动生成交叉领域文献分析简报。

01.
arXiv (CS.LG) 2026-06-18

A Guide to Estimating Conditional Average Treatment Effects in Competing Risks Settings

arXiv:2606.18281v1 Announce Type: cross Abstract: Conditional average treatment effects (CATEs) are central to treatment decision-making in personalized medicine. In competing risks settings, estimating CATEs from survival data allows for patient-specific assessments of treatment effectiveness for a specific event of interest while properly accounting for alternative event types. This distinction is essential in the presence of comorbidities, where competing causes of death may otherwise confound the therapeutic benefit. Focusing on right-censored survival times with binary treatment, we examine CATEs defined as covariate-conditional differences in the absolute risk for the event of interest at a fixed time. To this end, we study meta-learners which adapt machine learning algorithms for CATE estimation in competing risks scenarios. We systematically compare six meta-learners, combining Cox regression or random survival forests for risk modeling with elastic net regression or random forests for direct CATE modeling. To provide practical guidance on model selection, we evaluate their performance in multiple simulation settings, that differ in hazard complexity, treatment heterogeneity, treatment assignment, event type distribution and censoring. To facilitate applied use, we provide the R package, crsurvlearners, which implements all considered approaches.

02.
arXiv (CS.CV) 2026-06-12

MAMVI: 3D Test-Time Adaptation via Masked Multi-View Point Clouds

3D point cloud models suffer significant performance degradation under distribution shifts caused by sensor noise, occlusions, and environmental changes. Test-time adaptation (TTA) has emerged as a practical paradigm for mitigating this issue during inference. Recently, leveraging multi-view augmentation has shown promise in improving 3D TTA performance. However, existing multi-view approaches are often constrained by sequential optimization that treats each view independently. This sequential optimization leads to substantial inference latency due to repetitive optimization steps, making real-time adaptation impractical. To address this, we propose Masked Multi-View Test-Time Adaptation (MAMVI), which replaces sequential optimization with a unified single-step adaptation. Specifically, MAMVI utilizes a hybrid masking strategy that combines fixed ratios for stability with Beta-distributed sampling for diversity. By aggregating losses across multiple views, MAMVI performs adaptation through a single backward pass based on multi-view consensus. Additionally, a confidence-based adaptive learning rate is used to dynamically adjust the adaptation intensity for each sample. Extensive experiments on ModelNet-40C, ShapeNet-C, and ScanObjectNN-C demonstrate that MAMVI achieves state-of-the-art accuracy on ShapeNet-C and ScanObjectNN-C. Moreover, it remains competitive on ModelNet-40C while delivering 4.9-8.9 times faster inference, making it highly suitable for real-time applications. Our code is available at https://github.com/Inseok-kong/MAMVI

03.
arXiv (CS.AI) 2026-06-16

CLoVE: Personalized Federated Learning through Clustering of Loss Vector Embeddings

arXiv:2506.22427v2 Announce Type: replace-cross Abstract: We propose CLoVE (Clustering of Loss Vector Embeddings), a novel algorithm for Clustered Federated Learning (CFL). In CFL, clients are naturally grouped into clusters based on their data distribution. However, identifying these clusters is challenging, as client assignments are unknown. CLoVE utilizes client embeddings derived from model losses on client data, and leverages the insight that clients in the same cluster share similar loss values, while those in different clusters exhibit distinct loss patterns. Based on these embeddings, CLoVE is able to iteratively identify and separate clients from different clusters and optimize cluster-specific models through federated aggregation. Key advantages of CLoVE over existing CFL algorithms are (1) its simplicity, (2) its applicability to both supervised and unsupervised settings, and (3) the fact that it eliminates the need for near-optimal model initialization, which makes it more robust and better suited for real-world applications. We establish theoretical convergence bounds, showing that CLoVE can recover clusters accurately with high probability in a single round and converges exponentially fast to optimal models in a linear setting. Our comprehensive experiments comparing with a variety of both CFL and generic Personalized Federated Learning (PFL) algorithms on different types of datasets and an extensive array of non-IID settings demonstrate that CLoVE achieves highly accurate cluster recovery in just a few rounds of training, along with state-of-the-art model accuracy, across a variety of both supervised and unsupervised PFL tasks.

04.
arXiv (CS.CV) 2026-06-19

Thinking in Boxes: 3D Editing in Real Images Made Easy

Text and 2D-conditioning interfaces provide weak, ambiguous control over spatial transformations in image editing – particularly under large object motions and camera changes. Prior work has used 3D primitives such as boxes, but only as loose conditioning signals indicating approximate object location rather than specifying the transformation. We instead use 3D boxes as structured specifications: the user provides the input and output boxes of the edit, casting editing as a well-posed geometry problem. This ``thinking in boxes'' interface, where each box face is color-coded to convey 3D orientation, gives precise control over translation, rotation, scaling, and viewpoint changes in real images while preserving scene and object identity, and recovering previously unseen object regions. To ground transformations in scene appearance, we introduce a depth-aligned planar floor as a global reference frame, shaded with depth-aware cues. Conditioned on this structure, an image generator produces consistent results under large transformations. Trained in two stages – on synthetic multi-object scenes and a small set of real-world videos from Objectron – the system generalizes to complex, in-the-wild real images. Our method operates directly on real photographs and substantially outperforms recent state-of-the-art methods on large 3D edits.

05.
arXiv (CS.CV) 2026-06-16

A Comprehensive Survey of Medical Image Segmentation: Challenges, Benchmarks, and Beyond

Medical image segmentation plays a critical role in clinical diagnostics, treatment planning, disease monitoring, and neurological disorder identification. This article presents a comprehensive review of its systematic development, covering widely used public datasets, representative methods built on the U-Net, Transformer, and SAM architectures, and key evaluation metrics with their differences, followed by an analysis of major challenges from multiple perspectives. Unlike surveys that focus on a single model family or a specific clinical application, this review organizes U-Net-, Transformer-, and SAM-based methods within a unified analytical framework, with a particular focus on their effectiveness in improving segmentation accuracy and efficiency. This work aims to guide future research and support clinical translation of medical image segmentation, with all related resources publicly available in our GitHub repository: https://github.com/andrew-pengyu/Awsome_MedSeg/tree/main.

06.
arXiv (CS.CV) 2026-06-16

MNet++: Extended 2D/3D Networks for Anisotropic Medical Image Segmentation

This work demonstrates a full reproduction and extension of MNet, a hybrid 2D/3D convolutional network designed for anisotropic medical image segmentation. The original architecture was re-implemented within the nnU-Net framework to verify its reported performance and robustness to variable voxel spacing, known as anisotropy. Experiments were conducted on PROMISE prostate MRI and a controlled subset of LiTS liver CT under matched preprocessing and compute constraints. The reproduced MNet achieved a Dice similarity coefficient (DSC) of 89.0 +/- 0.9% on PROMISE, within 0.8% of the published result, and 94.3 +/- 1.9% / 54.6 +/- 3.1% for liver and tumor segmentation on LiTS, respectively. Two lightweight extensions were further introduced: (1) a learned Fusion Gating mechanism enabling adaptive 2D-3D feature blending, and (2) a VMamba state-space module for efficient long-range depth modelling. The Spatial Gating variant improved DSC by +0.8% with less than 3% inference overhead, while VMamba improved performance consistency, reducing PROMISE Dice variation to +/- 0.7% and achieving the strongest LiTS liver performance at 95.8% Dice. Both extensions preserved MNet robustness to anisotropy, with delta Dice = 1.5% across 1-4 mm voxel spacing. Overall, the study confirms MNet reproducibility and demonstrates that adaptive fusion and state-space modelling have the potential to further strengthen segmentation reliability under anisotropic conditions. However, further tests are required to provide definitive conclusions.

07.
arXiv (CS.AI) 2026-06-18

Bounded Context Management for Tabular Foundation Models on Stream Learning

arXiv:2606.18677v1 Announce Type: cross Abstract: Tabular stream learning requires predictions on sequentially arriving examples under distribution shift. While standard methods adapt by updating model states, tabular foundation models (TFMs) make predictions conditioned on a labeled context in an in-context manner, making them a natural alternative for stream learning. This shifts the challenge from how to update the model to how to manage the context. We propose a future information view that yields three practical requirements for context management: preserve recent examples, retain uncertain examples, and remove redundant examples. We instantiate these requirements as CURE (Context management via Uncertainty-aware admission and Redundancy aware Eviction), a context-managing policy with entropy-gated admission and redundancy-aware eviction. Across seven streams, CURE shows up to 27.0% relative improvement over classical stream learners, remains robust across multiple TFM backbones, and ranks first among other policy variants. Code and datasets are available at https://github.com/morcellinus/CURE-ICML-FMSD.

08.
arXiv (CS.AI) 2026-06-16

RaBiT: Residual-Aware Binarization Training for Accurate and Efficient LLMs

arXiv:2602.05367v3 Announce Type: replace Abstract: Efficient deployment of large language models (LLMs) requires extreme quantization, forcing a critical trade-off between low-bit efficiency and performance. Residual binarization enables hardware-friendly, matmul-free inference by stacking binary ($\pm$1) layers, but is plagued by pathological feature co-adaptation. We identify a key failure mode, which we term inter-path adaptation: during quantization-aware training (QAT), parallel residual binary paths learn redundant features, degrading the error-compensation structure and limiting the expressive capacity of the model. While prior work relies on heuristic workarounds (e.g., path freezing) that constrain the solution space, we propose RaBiT, a novel quantization framework that resolves co-adaptation by algorithmically enforcing a residual hierarchy. Its core mechanism sequentially derives each binary path from a single shared full-precision weight, which ensures that every path corrects the error of the preceding one. This process is stabilized by a robust initialization that prioritizes functional preservation over mere weight approximation. RaBiT redefines the 2-bit accuracy-efficiency frontier: it achieves state-of-the-art performance, rivals even hardware-intensive Vector Quantization (VQ) methods, and delivers a $4.49\times$ inference speed-up over full-precision models on an RTX 4090. Code is available at https://github.com/SamsungLabs/RaBiT.

09.
arXiv (CS.CL) 2026-06-15

WorkBench Revisited: Workplace Agents Two Years On

作者:

The best agent on WorkBench in March 2024, GPT-4, completed 43% of tasks and took an unintended harmful action, such as emailing the wrong person, on 26% of them. We re-visit the benchmark in June 2026 and find that the best agent to date, Claude Opus 4.8, completes 89% and takes an unintended harmful action on 2.5%. Aside from this considerable progress in frontier agent performance, three things stand out. First, capability and safety go together on WorkBench rather than trade off, so the models that finish the most tasks also do the least unintended damage. Second, while several classes of error have been totally eliminated, frontier models still make some basic mistakes that occasionally result in irreversible harm, such as sending an email to the wrong person. Third, the rise of open-weight models has drastically lowered costs for a performance level that was previously only accessible to proprietary models, while frontier costs have stayed relatively stable. We release an updated version of the benchmark with data and code quality improvements, new model scores, and analysis of agent progress on WorkBench since 2024.

10.
arXiv (CS.LG) 2026-06-12

Enhanced Low-Density Region Exploration in Classifier-Guided Diffusion Models Through Modified Reverse Diffusion Sampling

arXiv:2606.13347v1 Announce Type: new Abstract: Diffusion models have emerged as state-of-the-art generative models for high-fidelity image synthesis, particularly in their classifier-free guided and classifier-guided forms. However, standard classifier guidance concentrates probability mass around high-density class mean, leading to poor coverage of rare samples in the tails of the class-conditional distributions. Recent work on diffusion-based tail sampling mitigates this by training an additional low-density-seeking classifier with a synthetic-vs-real discriminator, at the cost of additional networks and training. In parallel, a number of samplers and distillation techniques accelerate or refine diffusion sampling, but do not explicitly address long-tail coverage. We propose a purely sampling-time, density-aware extension of classifier-guided conditional diffusion model that targets low-density regions without any additional training. We have applied guidance at noisy images not on predicted noise like most diffusion models. Starting from a pretrained conditional diffusion model and classifier on ImageNet, we modify the guided reverse dynamics by steering trajectories toward low-confidence regions via the modified classifier gradient, and at each time step, we also guide the sampling process toward the predicted real image. 1st guidance helps explore low-probability samples, and 2nd guidance helps to generate samples to be close to the real data manifold. The proposed sampler consistently improves ADM model recall at 64x64 resolution while maintaining a comparable FID, and with a 256x256 ADM model, we showed the results visually with different combinations of both guidance. We also showed that standard ADM classifier guidance, combined with predicted real image guidance, helps generate high perceptual quality samples with a 256x256 ADM model on ImageNet.

11.
arXiv (CS.LG) 2026-06-16

Cross-Silo De-Anonymization Under Local Differential Privacy: Threat Model, Phase Transition, and Coordination Necessity

arXiv:2606.16763v1 Announce Type: cross Abstract: When a person's records appear in k independent data silos, each protected by (epsilon, delta)-differential privacy, standard composition yields a valid (k*epsilon, k*delta)-DP guarantee for the joint output. This worst-case bound, however, does not answer the concrete inference question: at what k can an adversary actually identify a target person? This paper develops the information-theoretic framework needed to answer that question. We introduce cross-silo person-level DP (XSP-DP), a Pufferfish-style privacy notion whose adjacency relation captures all records of a single person across all silos simultaneously, and verify that the standard basic composition bound carries over to this adjacency model. Within this framework we prove that de-anonymization undergoes a phase transition at k* = Theta(log n / epsilon^2) (population size n, per-silo RR parameter epsilon): a Fano lower bound shows any estimator fails for k > k*. An explicit XOR + randomized-response construction demonstrates information synergy: each silo's output is individually uninformative about the target, yet the joint mutual information is strictly positive. For non-coordinated binary randomized-response mechanisms, we prove that de-anonymization is inevitable once k exceeds the threshold, establishing that cross-silo coordination is necessary. These results provide a baseline threat model and Theta-level threshold for cross-silo inference attacks under local DP.

12.
arXiv (CS.LG) 2026-06-17

Learning Credal Ensembles via Distributionally Robust Optimization

arXiv:2602.08470v3 Announce Type: replace Abstract: Credal predictors are models that are aware of epistemic uncertainty and produce a convex set of probabilistic predictions. They offer a principled way to quantify predictive epistemic uncertainty (EU) and have been shown to improve model robustness in various settings. However, most state-of-the-art methods mainly define EU as disagreement caused by random training initializations, which mostly reflects sensitivity to optimization randomness rather than uncertainty from deeper sources. To address this, we define EU as disagreement among models trained with varying relaxations of the i.i.d. assumption between training and test data. Based on this idea, we propose CreDRO, which learns an ensemble of plausible models through distributionally robust optimization. As a result, CreDRO captures EU not only from training randomness but also from meaningful disagreement due to potential distribution shifts between training and test data. Empirical results show that CreDRO consistently outperforms existing credal methods on tasks such as out-of-distribution detection across multiple benchmarks and selective classification in medical applications.

13.
arXiv (CS.CL) 2026-06-11

Quantifying Subliminal Behavioral Transfer Ratios in Language Model Distillation

Distillation of a language model intended to transfer benign behavior to a student model may also transfer undesirable characteristics, if they are present in the teacher model, a phenomenon known as subliminal learning. While qualitative evidence supports the existence of this effect, its magnitude has not been systematically characterized. This study quantifies subliminal behavioral transfer ratios by steering two teacher models (Llama-2-7B-Chat and Qwen2.5-7B-Instruct) at varying steering strengths and distilling student models using only benign data. Evaluation on 100 JailbreakBench prompts with GPT-4.1, serving as the evaluator, indicates that transfer is robust but exhibits distinct scaling behaviors. Llama-2 demonstrates a sharp threshold ($\tau = {0.25,0.32} \ beyond \ \alpha = -0.15$), whereas Qwen2.5 displays continuous and higher levels of transfer ($\tau$ up to $0.61$).

14.
arXiv (CS.AI) 2026-06-16

Green AI Carbon Optimizer: Carbon-Efficient Training Location Recommendation and Global AI Energy Demand Forecasting

arXiv:2606.14707v1 Announce Type: cross Abstract: AI training and deployment consume substantial electricity, but carbon outcomes remain weakly integrated into routine model development decisions. This paper presents Green AI Carbon Optimizer with two primary contributions: (i) a carbon aware cloud region recommendation method for training workloads, and (ii) a power law forecasting pipeline for global AI energy demand. For location recommendation, we combine regional grid carbon intensity, renewable share, and data center Power Usage Effectiveness (PUE) into a unified scoring model across 100+ regions from major cloud providers. For a reference workload (8*A100, 100h), estimated emissions in our sampled regions range from 7.74kg to 272.00kg CO2. Selecting the best region instead of the worst corresponds to a 97.2% reduction relative to the worst case. Ablation shows that ranking by renewable share alone can select regions with higher CO2 emissions than rankings that include grid carbon intensity. For forecasting, we fit a power law relation between parameter count and training energy using 26 anchor models. We combine this fit with scenario assumptions on model growth, hardware efficiency, and training frequency, and evaluate sensitivity to inference ratio and ecosystem scaling. Across scenarios, projected 2030 demand ranges from 7TWh to 1,436TWh under the stated assumptions, highlighting the importance of deployment choices, model scaling discipline, and transparent energy reporting.

15.
arXiv (CS.LG) 2026-06-16

Imbalanced Semi-Supervised Learning via Label Refinement and Threshold Adjustment

arXiv:2407.05370v3 Announce Type: replace Abstract: Semi-supervised learning (SSL) algorithms often struggle to perform well when trained on imbalanced data. In such scenarios, the generated pseudo-labels tend to exhibit a bias toward the majority class, and models relying on these pseudo-labels can further amplify this bias. Existing imbalanced SSL algorithms explore pseudo-labeling strategies based on either pseudo-label refinement (PLR) or threshold adjustment (THA), aiming to mitigate the bias through heuristic-driven designs. However, through a careful statistical analysis, we find that existing strategies are suboptimal: most PLR algorithms are either overly empirical or rely on the unrealistic assumption that models remain well-calibrated throughout training, while most THA algorithms depend on flawed metrics for pseudo-label selection. To address these shortcomings, we first derive the theoretically optimal form of pseudo-labels under class imbalance. This foundation leads to our key contribution: SEmi-supervised learning with pseudo-label optimization based on VALidation data (SEVAL), a unified framework that learns both PLR and THA parameters from a class-balanced subset of training data. By jointly optimizing these components, SEVAL adapts to specific task requirements while ensuring per-class pseudo-label reliability. Our experiments demonstrate that SEVAL outperforms state-of-the-art SSL methods, producing more accurate and effective pseudo-labels across various imbalanced SSL scenarios while remaining compatible with diverse SSL algorithms. The code is publicly available (https://github.com/ZerojumpLine/SEVAL).

16.
arXiv (CS.LG) 2026-06-11

How Low Can You Go? Active Learning for Sparse Model Discovery in the Ultra-Low-Data Limit

arXiv:2606.12182v1 Announce Type: new Abstract: Identifying the governing equations of complex dynamical systems remains a fundamental challenge across science and engineering. While early approaches relied on empirical data and heuristics, modern data-driven methods offer greater flexibility and fewer assumptions. However, data acquisition in real-world settings is often expensive. This work addresses this challenge by introducing an active learning strategy for dynamics discovery in the ultra-low data limit. Rather than sampling randomly, our method iteratively prioritizes regions that are most informative for model identification. This approach builds on Sparse Identification of Nonlinear Dynamics (SINDy), and utilizes an ensemble extension, E-SINDy, to estimate epistemic uncertainty and guide the sampling for both ordinary and partial differential equations (ODEs/PDEs). For ODEs, an exhaustive analysis is conducted on the Lorenz system across varying data budgets and noise levels. For PDEs, two systems with contrasting dynamical characteristics are examined: the Burgers' equation, where a sharp shock front creates a distinction between informative and uninformative regions, and the Kuramoto-Sivashinsky equation, which presents a more spatially complex sampling landscape. Across all scenarios, the proposed method accurately identifies the governing dynamics with significantly fewer data samples than random sampling.

17.
arXiv (CS.AI) 2026-06-16

Virtual Sensing to Enable Real-Time Monitoring of Inaccessible Locations & Unmeasurable Parameters

arXiv:2412.00107v2 Announce Type: replace-cross Abstract: Real-time monitoring of safety-critical interior states remains an open problem in energy systems where physical instrumentation is infeasible. Existing approaches rely on explicit governing equations, finite-dimensional state vectors, or per-instance retraining, which prevents mesh-independent, field-level inference at arbitrary interior coordinates under real-time constraints. We introduce operator-based virtual sensing for nuclear-grade thermal-fluid systems: we use the neural-operator framework to learn solution operators that map sparse boundary measurements to coupled internal fields in physically inaccessible regions, framing the problem class explicitly to distinguish it from classical state estimation and pointwise soft sensing. We instantiate this framework with MIMONet, a branch-trunk operator extended with three practical choices: multi-modal branch encoders for heterogeneous (scalar and function-valued) inputs; multiplicative branch fusion to preserve the bilinear PDE coupling structure; and shared-latent multi-field decoding with per-channel basis projections at the trunk's final layer. Evaluated across escalating complexity, from canonical lid-driven cavity flow to pressurized water reactor subchannels to fully coupled heat exchangers, MIMONet achieves below 5% relative errors and sub-millisecond inference on data-center accelerators (0.35 ms / 46 mJ per heat-exchanger inference on an NVIDIA H200, and sub-millisecond across the A40-H200-GH200 range), while remaining stable under 50% sensor noise. By staying accurate as geometric confinement and physics coupling intensify, MIMONet shows that operator-based virtual sensing can restore observability where physical instrumentation fails, establishing simulation-based feasibility within the evaluated operating envelopes as a step toward future experimental and cross-solver validation for safety-critical energy systems.

18.
arXiv (CS.CV) 2026-06-12

IterCAD: An Iterative Multimodal Agent for Visually-Grounded CAD Generation and Editing

Computer-Aided Design is pivotal in modern manufacturing, yet existing automated methods predominantly rely on open-loop, one-shot generation, creating a mismatch with iterative real-world practices. In this paper, we present IterCAD, a unified multimodal agent framework for closed-loop, interactive CAD generation and editing. We formulate the task as a multi-turn interaction between a multimodal agent and an executable CAD sandbox, covering three tasks: Drawing-to-Code, Text-to-Code, and Interactive Editing. To support this, we develop a data synthesis pipeline incorporating advanced industrial manufacturing features to generate standard-compliant multi-view engineering drawings, complex code-editing tasks, and high-fidelity interaction trajectories. We optimize the agent via progressive SFT followed by geometry-aware reinforcement learning with viable-prefix masking to enhance code executability and geometric fidelity. Finally, we introduce the IterCAD-Bench evaluation suite and propose the Chamfer Distance Tolerance-Recall (CD-TR) curve alongside its AUC-TR metric, establishing a survivor-bias-free standard that unifies code validity and geometric precision. Extensive experiments demonstrate that IterCAD achieves highly competitive performance across multiple benchmarks, significantly outperforming existing approaches in both code executability and geometric precision, while exhibiting superior capabilities in closed-loop iterative refinement.

19.
arXiv (CS.LG) 2026-06-11

Density estimation for Hellinger via minimum-distance estimators: mixtures of Gaussians, log-concave, and more

arXiv:2606.11469v1 Announce Type: cross Abstract: We study the task of density estimation, where we hope to accurately estimate a probability density from $n$ samples. A textbook method for density estimation in total variation distance is the minimum-distance estimator approach, where we conclude both the algorithm and the analysis merely from bounding the VC dimension of a particular concept class (the so-called Yatracos class). While this technique has originally yielded sharp guarantees primarily for total variation distance, in this work we extend the minimum-distance estimator approach for learning within Hellinger distance. Our main observation is that we may produce an analogous recipe for Hellinger (where we only require bounding the VC dimension of a related concept class) by drawing connections to recent results yielding reverse data processing inequalities. This recipe is flexible enough to accommodate fast algorithms originally designed for total variation distance; by modifying the approach of Acharya et al. (2017) we conclude the first near-linear time algorithm for learning classes including univariate mixtures of log-concave densities and mixtures of Gaussians (with arbitrary variances), with near-optimal sample complexity.

20.
arXiv (CS.LG) 2026-06-16

Machine learning enables roughness-driven inverse design of milling processes

arXiv:2606.16032v1 Announce Type: cross Abstract: Interest in applying data-driven approaches in manufacturing has grown significantly, particularly for mapping complex, high-dimensional relationships. The milling process is one area where predictive models can link influential parameters to surface roughness metrics prior to in situ operations. While this approach offers clear advantages, it faces challenges due to limited datasets and robustness issues in inverse design paradigms. To address these challenges, this paper proposes a machine learning (ML)-based framework for the inverse design of the surface milling process, with a focus on surface roughness as the design objective. The framework employs forward training of two ML models, a deep neural network (DNN) and a random forest (RF) ensemble, both developed using a high-fidelity synthetic dataset generated from a computational simulation framework. These trained models are integrated into a Bayesian optimization (BO) procedure to overcome the multiplicity problem arising from the many-to-one mapping inherent in the dataset. The approach identifies top-performing milling process configurations, considering both process and tool parameters, and presents them from the full solution space. The models achieve average relative errors below 5% when compared to reference results, thereby demonstrating the robustness and reliability of the proposed methodology.

21.
arXiv (CS.LG) 2026-06-18

Trainable Photonic Measurement for Physics-Informed PDE Learning

arXiv:2606.18713v1 Announce Type: new Abstract: Photonic quantum machine learning offers a route to trainable physical representations built from phase, interference and measurement. However, its role in scientific machine learning remains largely unexplored. Physics-informed neural fields provide a natural setting, because differential equations require trial spaces that preserve phase, frequency and derivative structure. Here we introduce a photonic quantum neural field in which coordinates become trainable optical phases, are mixed by multi-photon Fock-space interference and are decoded from photon-number measurements. The photonic circuit is optimized as the neural-field representation itself, not as a fixed feature map or hardware accelerator. Photonic measurement is therefore a trainable representation on which the physics-informed residual is minimized. Across seven elliptic, wave, nonlinear dispersive and inverse PDE benchmarks, we observe a phase-complexity transition: classical coordinate and Fourier-feature networks suffice in smooth regimes, whereas the photonic field is most accurate when residual derivatives amplify phase mismatch. In the hardest regimes it gives the lowest errors, with margins reaching an order of magnitude and about one quarter of the trainable parameters of classical baselines. Frozen and shuffled controls, together with noise stress tests, attribute this gain to learned interference and stable Fock-probability readout under compound perturbations. These results identify photonic quantum measurement as a representation-learning principle for scientific machine learning.

22.
arXiv (CS.AI) 2026-06-17

Enhanced Evolutionary Multi-Objective Deep Reinforcement Learning for Reliable and Efficient Wireless Rechargeable Sensor Networks

arXiv:2510.21127v2 Announce Type: replace-cross Abstract: Despite rapid advancements in sensor networks, conventional battery-powered sensor networks suffer from limited operational lifespans and frequent maintenance requirements that severely constrain their deployment in remote and inaccessible environments. As such, wireless rechargeable sensor networks (WRSNs) with mobile charging capabilities offer a promising solution to extend network lifetime. However, WRSNs face critical challenges from the inherent trade-off between maximizing the node survival rates and maximizing charging energy efficiency under dynamic operational conditions. In this paper, we investigate a typical scenario where mobile chargers move and charge the sensor, thereby maintaining the network connectivity while minimizing the energy waste. Specifically, we formulate a multi-objective optimization problem that simultaneously maximizes the network node survival rate and mobile charger energy usage efficiency across multiple time slots, which presents NP-hard computational complexity with long-term temporal dependencies that make traditional optimization approaches ineffective. To address these challenges, we propose an enhanced evolutionary multi-objective deep reinforcement learning algorithm, which integrates a long short-term memory (LSTM)-based policy network for temporal pattern recognition, a multilayer perceptron-based prospective increment model for future state prediction, and a time-varying Pareto policy evaluation method for dynamic preference adaptation. Extensive simulation results demonstrate that the proposed algorithm significantly outperforms existing approaches in balancing node survival rate and energy efficiency while generating diverse Pareto-optimal solutions. Moreover, the LSTM-enhanced policy network converges 25% faster than conventional networks, with the time-varying evaluation method effectively adapting to dynamic conditions.

23.
arXiv (CS.AI) 2026-06-18

An In-depth Study of LLM Contributions to the Bin Packing Problem

arXiv:2510.27353v2 Announce Type: replace Abstract: Recent studies have suggested that Large Language Models (LLMs) could provide interesting ideas contributing to mathematical discovery. This claim was motivated by reports that LLM-based genetic algorithms produced heuristics offering new insights into the online bin packing problem under uniform and Weibull distributions. In this work, we reassess this claim through a detailed analysis of the heuristics produced by LLMs, examining both their behavior and interpretability. Despite being human-readable, these heuristics remain largely opaque even to domain experts. Building on this analysis, we propose a new class of algorithms tailored to these specific bin packing instances. The derived algorithms are significantly simpler, more efficient, more interpretable, and more generalizable, suggesting that the considered instances are themselves relatively simple. We then discuss the limitations of the claim regarding LLMs' contribution to this problem, which appears to rest on the mistaken assumption that the instances had previously been studied. Our findings instead emphasize the need for rigorous validation and contextualization when assessing the scientific value of LLM-generated outputs.

24.
arXiv (CS.LG) 2026-06-11

Integral Formulation of QENDy for Robust Nonlinear System Identification

arXiv:2606.11629v1 Announce Type: cross Abstract: This manuscript proposes an integral formulation of the newly defined quadratic embedding method for identifying nonlinear systems (QENDy). In the original algorithm, trajectory data points along with their time derivatives are used. Methods for calculating time derivatives make the algorithm sensitive to noise. Our integral formulation does not use the time derivatives. This results in a more robust method to learn the dynamics.

25.
arXiv (CS.CL) 2026-06-19

IdealGPT: Iteratively Decomposing Vision and Language Reasoning via Large Language Models

The field of vision-and-language (VL) understanding has made unprecedented progress with end-to-end large pre-trained VL models (VLMs). However, they still fall short in zero-shot reasoning tasks that require multi-step inferencing. To achieve this goal, previous works resort to a divide-and-conquer pipeline. In this paper, we argue that previous efforts have several inherent shortcomings: 1) They rely on domain-specific sub-question decomposing models. 2) They force models to predict the final answer even if the sub-questions or sub-answers provide insufficient information. We address these limitations via IdealGPT, a framework that iteratively decomposes VL reasoning using large language models (LLMs). Specifically, IdealGPT utilizes an LLM to generate sub-questions, a VLM to provide corresponding sub-answers, and another LLM to reason to achieve the final answer. These three modules perform the divide-and-conquer procedure iteratively until the model is confident about the final answer to the main question. We evaluate IdealGPT on multiple challenging VL reasoning tasks under a zero-shot setting. In particular, our IdealGPT outperforms the best existing GPT-4-like models by an absolute 10% on VCR and 15% on SNLI-VE. Code is available at https://github.com/Hxyou/IdealGPT