Academic Intelligence · Curated Daily

探索全球前沿学术脉络

AcademicHub 汇聚顶级期刊与预印本平台的实时文献。定制您的专属科研雷达,利用大语言模型自动生成交叉领域文献分析简报。

01.
arXiv (CS.LG) 2026-06-16

DemoDiffusion: One-Shot Human Imitation using pre-trained Diffusion Policy

arXiv:2506.20668v3 Announce Type: replace-cross Abstract: We propose DemoDiffusion, a simple method for enabling robots to perform manipulation tasks by imitating a single human demonstration, without requiring task-specific training or paired human-robot data. Our approach is based on two insights. First, the hand motion in a human demonstration provides a useful prior for the robot's end-effector trajectory, which we can convert into a rough open-loop robot motion trajectory via kinematic retargeting. Second, while this retargeted motion captures the overall structure of the task, it may not align well with plausible robot actions in-context. To address this, we leverage a pre-trained generalist diffusion policy to modify the trajectory, ensuring it both follows the human motion and remains within the distribution of plausible robot actions. Unlike approaches based on online reinforcement learning or paired human-robot data, our method enables robust adaptation to new tasks and scenes with minimal effort. In real-world experiments across 8 diverse manipulation tasks, DemoDiffusion achieves 83.8\% average success rate, compared to 13.8\% for the pre-trained policy and 52.5\% for kinematic retargeting, succeeding even on tasks where the pre-trained generalist policy fails entirely. Project page: https://demodiffusion.github.io/

02.
medRxiv (Medicine) 2026-06-15

Non-invasive intracranial pressure waveform reconstruction with deep learning

Purpose: Continuous intracranial pressure (ICP) monitoring requires invasive instrumentation, reaching only a narrow subset of critically ill patients. We tested whether deep learning models trained on routinely acquired extracranial signals can reconstruct continuous ICP waveforms at clinically relevant accuracy in an independent external cohort. Methods: In adults admitted to the ICU at a single quaternary health system, five deep learning architectures were trained on high-frequency arterial blood pressure (ABP), photoplethysmography (PPG), and electrocardiography (ECG) waveforms, using invasive (intraparenchymal) ICP as ground truth. Two fusion strategies (early and late) and three training objectives (waveform-morphology, baseline robust regression, and weighted robust regression) were evaluated. Models were externally validated on the held-out MIMIC-III Waveform Database. Performance was assessed by mean absolute error (MAE) and waveform similarity by Pearson correlation (r). Results: We analyzed data from 158 critically ill adults (~5,322 hours) across two quaternary health systems (Johns Hopkins Hospital, Baltimore; Beth Israel Deaconess Medical Center, Boston). Validation MAE ranged from 4.276 mmHg [95% CI 4.269, 4.283] (gated recurrent, late fusion) to 4.946 mmHg [95% CI 4.938, 4.956] (attention-based, early fusion), with Pearson r ranging from 0.599 [95% CI 0.599, 0.600] to 0.722 [95% CI 0.722, 0.723]. The multiscale encoder-decoder model demonstrated the most favorable MAE-correlation tradeoff. Conclusion: This is the first demonstration that continuous ICP waveform reconstruction from bedside signals generalizes across institutions at clinically relevant accuracy, establishing a foundation for non-invasive ICP monitoring and motivating validation across broader populations and ICP ranges.

03.
arXiv (CS.AI) 2026-06-15

Q-Net: Queue Length Estimation via Kalman-based Neural Networks

arXiv:2509.24725v4 Announce Type: replace-cross Abstract: Estimating queue lengths at signalized intersections is a long-standing challenge in traffic management. Partial observability of vehicle flows complicates this task despite the availability of two privacy-preserving data sources: (i) aggregated vehicle counts from loop detectors near stop lines, and (ii) aggregated floating car data (aFCD) that provide segment-wise average speed measurements. However, how to integrate these sources with differing spatial and temporal resolutions for queue length estimation is rather unclear. Addressing this question, we present Q-Net: a queue estimation framework built upon a state-space formulation. This design addresses key challenges in queue modeling, such as violations of traffic conservation assumptions. Q-Net follows the Kalman predict-update structure and maintains physical interpretability in both the state evolution and measurement models. Q-Net uses an AI-augmented Kalman filter to learn time-varying gain dynamics from data. The framework supports real-time implementation and improves spatial transferability by grouping aFCD measurements into fixed-size local groups, making the number of learnable parameters independent of section length. Evaluations on urban main roads in Rotterdam, the Netherlands, show that Q-Net outperforms baseline methods, tracks queue formation and dissipation accurately, and mitigates aFCD-induced delays. By combining data efficiency, interpretability, real-time applicability, and spatial transferability, Q-Net makes accurate queue length estimation possible without costly sensing infrastructure like cameras or radar.

04.
arXiv (CS.CV) 2026-06-12

IterCAD: An Iterative Multimodal Agent for Visually-Grounded CAD Generation and Editing

Computer-Aided Design is pivotal in modern manufacturing, yet existing automated methods predominantly rely on open-loop, one-shot generation, creating a mismatch with iterative real-world practices. In this paper, we present IterCAD, a unified multimodal agent framework for closed-loop, interactive CAD generation and editing. We formulate the task as a multi-turn interaction between a multimodal agent and an executable CAD sandbox, covering three tasks: Drawing-to-Code, Text-to-Code, and Interactive Editing. To support this, we develop a data synthesis pipeline incorporating advanced industrial manufacturing features to generate standard-compliant multi-view engineering drawings, complex code-editing tasks, and high-fidelity interaction trajectories. We optimize the agent via progressive SFT followed by geometry-aware reinforcement learning with viable-prefix masking to enhance code executability and geometric fidelity. Finally, we introduce the IterCAD-Bench evaluation suite and propose the Chamfer Distance Tolerance-Recall (CD-TR) curve alongside its AUC-TR metric, establishing a survivor-bias-free standard that unifies code validity and geometric precision. Extensive experiments demonstrate that IterCAD achieves highly competitive performance across multiple benchmarks, significantly outperforming existing approaches in both code executability and geometric precision, while exhibiting superior capabilities in closed-loop iterative refinement.

05.
arXiv (CS.CV) 2026-06-18

HandwritingAgent: Language-Driven Handwriting Synthesis in Scalable Vector Space

Teaching machines to emulate natural handwriting styles remains an open challenge, as it requires synthesizing stroke sequences that dynamically vary in shape, texture, pressure and script - not only across individuals, but also within a single person's handwriting. Attempts at this challenge have largely explored deep learning methods in both online and offline settings. However, these approaches are often constrained by style-specific architectural choices, heavy reliance on large datasets, high compute costs, and a lack of flexible control over writing styles through natural language. To this end, we introduce HandwritingAgent, a language-driven agent that can synthesize natural handwriting sequences directly in Scalable Vector Graphics (SVG) format with no need for style-specific training. The agent leverages a large reasoning model to geometrically analyse and autoregressively generate target handwritten glyphs as stroke sequences in a discrete grid canvas environment. Generation is conditioned on texts provided in either conversational or non-conversational mode, along with a reference handwriting-style image. Experiments on diverse handwriting tasks spanning imitation, recognition, multi-lingual handwriting synthesis, and generation of complex handwritten maths and science expressions indicate substantial improvement in performance, with HandwritingAgent matching or surpassing state-of-the-art generative handwriting models, while providing a more efficient, controllable, and generalizable synthesis method.

06.
arXiv (CS.CL) 2026-06-17

Security and Privacy Prompts in the Wild: What Users Ask LLMs and How LLMs Respond

Large language models (LLMs) are widely used to fulfill users' information needs; users ask LLMs about the weather, pose educational questions, and consult them for legal assistance. One particularly understudied area is digital security and privacy (S&P), where users may seek LLMs' help on how to secure their online accounts or protect their computers from cyber attacks. To the best of our knowledge, no prior study has collected or analyzed the S&P questions users ask LLMs; prior research on LLM response quality relied on expert-authored S&P misconceptions or FAQs rather than user queries. Drawing from WildChat, a dataset of 3.2M user-LLM conversations collected in the wild, our study identifies 14,727 S&P prompts and categorizes them into nine categories covering a wide range of S&P topics. From the S&P prompts, we sampled 450 and performed a thematic analysis to characterize the S&P questions users ask LLMs. Separate from the thematic analysis, we curated 270 advice-seeking S&P prompts, where users ask for recommendations, guidance, or specific S&P information. We measured LLM response quality and consistency when posing the prompt to LLMs 10 times. We found that commercial LLMs outperform open-weight models (GPT 5.5 provided "good enough" responses on 98% of prompts; Llama 4 on 47%). However, among prompts that received high-quality responses on average, commercial models sometimes produce contradictory responses across runs, risking confusing or misleading users.

07.
arXiv (CS.AI) 2026-06-19

SPOT-E: Test-Time Entropy Shaping with Visual Spotlights for Frozen VLMs

arXiv:2606.20244v1 Announce Type: cross Abstract: Vision-language models (VLMs) often underperform on evidence intensive tasks because decisive visual evidence are small, localized, and easy to overlook, leading to failures in evidence readout even when high-level reasoning is intact. Prior inference-time visual interventions can improve grounding without retraining, but they are largely open-loop and lack a mechanism to verify whether highlighted evidence is actually used. We study answer-span prediction entropy as a model-internal feedback signal and show that naive entropy minimization is ambiguous, since low entropy may arise from evidence-grounded confidence or shortcut collapse. To resolve this ambiguity, we introduce low-entropy anchors and an entropy-shaping objective that reduces answer uncertainty while preserving baseline high-confidence tokens. We instantiate this principle in SPOT-E, a plug-and-play test-time method that produces question-conditioned spotlights, optimized per instance via light-weight tuning based on Group Relative Policy Optimization (GRPO). Across all benchmarks and different VLM families, SPOT-E yields consistent gains and improved robustness under visual corruptions. Code is publicly available at: \url{https://github.com/YinBo0927/SPOT-E}

08.
arXiv (CS.AI) 2026-06-17

Quantum Cinema: An Interactive Cinematic Exploration of Quantum Computing Hardware via Generative World Models

arXiv:2606.17102v1 Announce Type: cross Abstract: Quantum computing promises transformative advances across science and industry, yet the physical hardware that enables these computations remains invisible to the public: quantum processors operate inside sealed dilution refrigerators at temperatures near absolute zero, making direct observation impossible. This "imagination gap" between quantum computing's growing societal impact and the public's ability to visualize it represents a significant barrier to quantum literacy and workforce development. We present Quantum Cinema, an open-source, browser-based interactive application that closes this gap by transforming invisible quantum hardware into explorable, cinematic experiences using generative world models. Quantum Cinema guides users through a four-act narrative – from the foundational Nobel Prize-winning science of quantum entanglement, through curated video introductions to three major quantum computing architectures (trapped-ion, neutral-atom, and superconducting systems), into immersive three-dimensional generative worlds that make invisible quantum phenomena observable, and finally to interactive radar-chart comparisons grounded in real quantum device specifications. All three-dimensional environments are generated using WorldLabs' generative world model platform and are scientifically grounded in curated metrics from Amazon Web Services (AWS) Braket quantum hardware. Quantum Cinema requires no installation, no specialized hardware, and no quantum computing background. It is designed to serve two distinct communities: scholars and developers seeking to replicate or extend the platform, and educators, researchers, and science communicators seeking an intuitive tool for explaining quantum hardware to diverse audiences. This paper describes the system architecture, the generative world model pipeline, use cases for both communities, and directions for future work.

09.
arXiv (quant-ph) 2026-06-12

Measuring Control-Plane Openness in Near-Term Quantum Computing: A Rubric, Its Validation, and an Application to Thirteen Vendor Stacks

arXiv:2605.15233v2 Announce Type: replace Abstract: Public access to pulse-level and control-electronics interfaces in commercial quantum computing has bifurcated. This paper proposes a six-axis rubric for measuring control-plane openness, the layer between gate-level circuit specification and physical control electronics, defined operationally so that the same evidence produces the same grade across vendors. The rubric is validated three ways: a blinded re-grading pass, thirty-nine days after the evidence cutoff, that tests whether the cited evidence and the level definitions alone reproduce the recorded grades; a boundary-case methodology that fixes where each level begins and ends; and a published grading protocol that lets others reproduce and contest any cell. We establish that the rubric measures change rather than describing a snapshot by comparing the catalog against the documented control plane before the February 2025 removal of pulse-level access from IBM hardware, and reporting the cells that moved. The rubric is applied to thirteen commercial vendors across superconducting, trapped-ion, neutral-atom, and photonic modalities as of May 1, 2026, as its first application, and one of the three harms the rubric is designed to detect is demonstrated through a reproduction-access audit of five pre-2025 IBM Qiskit Pulse experiments against the access available on current hardware, carried through to a client-side structural port of the audit's selected target to Rigetti Quil-T. The catalog ships as a separate machine-readable artifact under CC-BY-4.0 with per-cell source URLs (https://doi.org/10.5281/zenodo.20163276). The catalog readings will change as vendor policies shift; the rubric is the contribution that survives them.

10.
arXiv (CS.CL) 2026-06-15

SIMMER: Benchmarking Latent Failures in LLM Executable Planning with a World Model

Large language models (LLMs) are increasingly deployed as planners for autonomous agents in household environments. While existing benchmarks evaluate whether LLM-generated plans execute successfully, they overlook a critical type of failure: latent failures. Unlike immediate failures that trigger instant feedback at execution time and enable timely correction, latent failures do not immediately halt plan execution but silently compromise goal achievement. In severe cases, they cause irreversible harm. To address this gap, we introduce SIMMER, a benchmark for evaluating latent failures in LLM planning through a human-curated symbolic world model grounded in the kitchen domain. SIMMER defines a world model comprising 77 actions, 262 unique objects, and approximately 46,800 possible interactions that are semantically realistic, derived from real-world cooking scripts. It then leverages a state machine executor that validates plans against the world model and detects immediate precondition violations, latent hazards, and irreversible failures. Experiments across six LLMs show that even frontier models achieve at most 17% error-free plans. Moreover, up to 56% of plans contain latent failures, the majority of which lead to irreversible consequences. We further demonstrate that explicit state reasoning via counterfactual foresight simulation can reduce latent failures by up to 72% and irreversible cases by up to 75%, suggesting a promising direction for more robust LLM planners.

11.
arXiv (CS.LG) 2026-06-19

Predicting gestational age at birth in the context of preterm birth from multi-modal fetal MRI

arXiv:2606.20172v1 Announce Type: new Abstract: Preterm birth is associated with significant mortality and a risk for lifelong morbidity. The complex multifactorial aetiology hampers accurate prediction and thus optimal care. A pipeline consisting of bespoke machine learning methods for data imputation, feature selection, and regression models to predict gestational age (GA) at birth was developed and evaluated from comprehensive multi-modal morphological and functional fetal MRI data from 333 control cases and 93 preterm birth cases. The GA at birth predictions were classified into term and preterm categories and their accuracy, sensitivity, and specificity were reported. An ablation study was performed to further validate the design of the pipeline. Performance was evaluated using stratified 10-fold cross-validation. The pipeline achieves an R2 score of 0.13 and a mean absolute error of 2.74 weeks. It also achieves a 0.77 accuracy, 0.59 sensitivity, and 0.82 specificity across folds. The predominant features selected by the pipeline include cervical length and statistics derived from placental T2* values. The confluence of fast, motion-robust and multi-modal fetal MRI techniques and machine learning prediction allowed the prediction of the gestation at birth. This information is essential for any pregnancy. To the best of our knowledge, preterm birth had only been addressed as a classification problem in the literature. Therefore, this work provides a proof of concept. Future work will increase the cohort size to allow for finer stratification within the preterm birth cohort. Our code is available at https://github.com/dfajardorojas/ml-for-preterm-birth-.

12.
arXiv (CS.CV) 2026-06-16

Simulation-Based Multi-Fillet Evaluation of Woody Breast Poultry Fillets

Woody breast (WB) is a myopathy in modern broiler chickens that causes the breast muscle to become unusually stiff and fibrous, leading to decreased meat quality and significant economic losses. State-of-the-art automated WB detection relies on a side-view imaging system to analyze the bending behavior of a single fillet as it falls off a conveyor belt. While highly accurate, this approach is constrained by its single-fillet field of view, creating throughput bottlenecks on commercial processing lines. In this paper, we address this limitation via a novel multi-fillet detection architecture utilizing a top-down camera configuration. To validate our approach, we first develop a high-fidelity digital twin of an industrial conveyor system. Next, we synthesize a diverse dataset of 3D fillet meshes and model their viscoelastic bending dynamics using a physics-based simulation engine. Lastly, a continuous 2D shape deformation score is extracted from the top-down perspective as the simulated fillets traverse the roller precipice. Experimental results demonstrate that the top-down shape score effectively captures the contour changes of the fillets as it bends, providing a robust and scalable alternative to a side-view imaging system for simultaneous multi-fillet WB evaluation.

13.
arXiv (CS.AI) 2026-06-12

Foresight: Iterative Reasoning About Clues that Matter for Navigation

arXiv:2606.12550v1 Announce Type: cross Abstract: Open-world mapless navigation from sparse language instructions requires resolving underspecified goals and inferring which environmental cues are relevant for reaching the goal. For instance, reaching an out-of-view destination may require interpreting ramps, signs, or detours that reveal where to go or which route to take. Prior works are limited by their reliance on known navigation factors and closed-set factor categories, or identify cues before motion planning and miss plan-dependent cues. We argue that pretrained Vision-Language Models (VLMs) can discover novel instruction-relevant cues, but require adaptation to focus on which cues matter and how they should influence motion planning. We realize these ideas in Foresight, a test-time framework in which a finetuned VLM alternates between proposing image-space motion plans and critiquing them using the language goal and visual context. Subsequent plans are conditioned on prior critiques, enabling iterative motion refinement before execution. To align plan critiques and refinements with open-set behavior preferences, we learn a reward model from human feedback and use it to post-train the VLM with reinforcement learning in the plan-critique loop. In offline evaluations and 6 real-world environments, Foresight improves average task success by 37% and reduces interventions per mission by 52% relative to state-of-the-art test-time reasoning and foundation-model baselines, while running in real-time on a Jetson AGX Orin. We will release code, data, and training details to support future work on test-time reasoning for robot motion refinement. Additional videos at: https://amrl.cs.utexas.edu/foresight

14.
arXiv (quant-ph) 2026-06-16

Initiation of Superradiance from Different Collective Spin States

arXiv:2606.14949v1 Announce Type: new Abstract: Superradiance is an extensive cooperative spontaneous emission phenomenon. Some atomic collective spin states exhibit it. However, distinct initial states differ in their decay dynamics. Dicke states with different numbers of excitations have their peak emission intensity shifted in time depending on the number of excitations. Emission intensity in atomic coherent states depends on their polarization. Some specific states undergo a squeezing controlled crossover, making the emission character dependent on the amount of squeezing in the state. We present detailed results on the superradiant dynamics of a representative selection of Dicke states. For large N, we are able to predict fairly accurately the pulse profile in each case using the mean field approximation, an approach based on the Fokker Planck Equation. We also present results on the intensity correlation function of the emission.

15.
arXiv (CS.CV) 2026-06-19

DiffMath: Symbol- and Graph-Aware Latent Diffusion Transformer for Handwritten Mathematical Expression Generation

Handwritten Mathematical Expression Generation (HMEG) is challenging due to the complex two-dimensional layouts and long-range structural dependencies of mathematical expressions. Existing methods typically rely on explicit spatial supervision, such as symbol-level bounding boxes, which incurs high annotation costs and limits scalability. In this work, we propose DiffMath, a symbol- and graph-aware latent diffusion framework that leverages the hierarchical structure inherent in LaTeX as a structural prior, eliminating the need for positional supervision. First, we design a Relational Abstract Syntax Tree (RelAST), a generation-oriented representation that distills MathML trees into compact triplet sequences [S, R, D], where each token directly encodes a symbol identity, spatial relation, or nesting depth. Second, we introduce MathVAE, which learns structure-preserving latent representations through symbol-aware and relation-aware perceptual regularization, ensuring that the latent space captures both character semantics and spatial topology. Third, MathDiT performs conditional denoising in this structured latent space, further guided by a global symbol-count prior via Adaptive Layer Normalization (AdaLN) to improve structural coherence. Experiments show that DiffMath produces structurally consistent handwritten expressions, achieves superior performance over existing methods, and improves the accuracy of downstream OCR models through synthetic data augmentation.

16.
arXiv (CS.CV) 2026-06-19

CoMo: Learning Continuous Latent Motion from Internet Videos for Scalable Robot Learning

Unsupervised learning of latent motion from Internet videos is crucial for robot learning. Existing discrete methods generally mitigate the shortcut learning caused by extracting excessive static backgrounds through vector quantization with a small codebook size. However, they suffer from information loss and struggle to capture more complex and fine-grained dynamics. Moreover, there is an inherent gap between the distribution of discrete latent motion and continuous robot action, which hinders the joint learning of a unified policy. We propose CoMo, which aims to learn more precise continuous latent motion from internet-scale videos. CoMo employs an early temporal difference (Td) mechanism to increase the shortcut learning difficulty and explicitly enhance motion cues. Additionally, to ensure latent motion better captures meaningful foregrounds, we further propose a temporal contrastive learning (Tcl) scheme. Specifically, positive pairs are constructed with a small future frame temporal offset, while negative pairs are formed by directly reversing the temporal direction. The proposed Td and Tcl work synergistically and effectively ensure that the latent motion focuses better on the foreground and reinforces motion cues. Critically, CoMo exhibits strong zeroshot generalization, enabling it to generate effective pseudo action labels for unseen videos. Extensive simulated and real-world experiments show that policies co-trained with CoMo pseudo action labels achieve superior performance with both diffusion and auto-regressive architectures.

17.
arXiv (CS.LG) 2026-06-15

Multidimensional Bayesian Active Machine Learning of Working Memory Task Performance

arXiv:2510.00375v2 Announce Type: replace Abstract: While adaptive experimental design has outgrown one-dimensional, staircase-based adaptations, most cognitive experiments still control a single factor and summarize performance with a scalar. We show a validation of a Bayesian, two-axis, active-classification approach, carried out in an immersive virtual testing environment for a 5-by-5 working-memory reconstruction task. Two variables are controlled: spatial load L (number of occupied tiles) and feature-binding load K (number of distinct colors) of items. Stimulus acquisition is guided by posterior uncertainty of a nonparametric Gaussian Process (GP) probabilistic classifier, which outputs a surface over (L, K) rather than a single threshold or max span value. In a young adult population, we compare GP-driven Adaptive Mode (AM) with a traditional adaptive staircase Classic Mode (CM), which varies L only at K = 3. Parity between the methods is achieved for this cohort, with an intraclass coefficient of 0.755 at K = 3. Additionally, AM reveals individual differences in interactions between spatial load and feature binding. AM estimates converge more quickly than other sampling strategies, demonstrating that only about 30 samples are required for accurate fitting of the full model.

18.
arXiv (CS.AI) 2026-06-12

AI-Automation Tooling in Computer Engineering Education: Mixed-Methods TAM/UTAUT Evidence for a General Acceptance Attitude

作者:

arXiv:2606.12424v1 Announce Type: cross Abstract: As generative AI and low-code workflow platforms become routine in software practice, a key educational question is whether the next generation of computer engineers will accept these tools as useful, usable, and worthy of sustained engagement. This paper reports a mixed-methods, cross-sectional study of undergraduate computer engineering students' acceptance of AI automation tooling, instantiated through the open-source platform n8n across three identically scripted workshops in Thailand (n = 103). A 12-item, five-point Likert instrument mapped to six TAM/UTAUT constructs - Performance Expectancy (PE), Effort Expectancy (EE), Behavioral Intention (BI), Self-Efficacy (SE), Hedonic Motivation (HM), and Output Quality (OQ) - was complemented by inductive thematic analysis of open-ended feedback. Analyses combined ordinal reliability estimation, bootstrap confidence intervals, non-parametric tests, multiple-comparison-controlled correlations, polychoric dimensionality diagnostics, a common-method-bias check, and between-session comparisons. Acceptance was favorable across all six constructs with large effect sizes, with PE emerging as the strongest construct and HM as the weakest. Dimensionality diagnostics further revealed that canonical TAM/UTAUT sub-facets collapsed into a single general acceptance factor in this short-form post-workshop context, a finding with important methodological and theoretical implications. Qualitative themes converged with the quantitative profile regarding usefulness and enthusiasm but diverged on output quality, revealing a small yet articulate reliability-skeptical minority. The findings support the curricular adoption of AI automation tooling in undergraduate computing education and identify three theory-grounded instructional levers: instruction-sequencing scaffolds, self-efficacy supports, and trust-calibration interventions.

19.
arXiv (CS.CV) 2026-06-16

Seeing Roads Through Words: A Language-Guided Framework for RGB-T Driving Scene Segmentation

Robust semantic segmentation of road scenes under adverse illumination, lighting, and shadow conditions remain a core challenge for autonomous driving applications. RGB-Thermal fusion is a standard approach, yet existing methods apply static fusion strategies uniformly across all conditions, allowing modality-specific noise to propagate throughout the network. Hence, we propose CLARITY that dynamically adapts its fusion strategy to the detected scene condition. Guided by vision-language model (VLM) priors, the network learns to modulate each modality's contribution based on the illumination state while leveraging object embeddings for segmentation, rather than applying a fixed fusion policy. We further introduce two mechanisms - one which preserves valid dark-object semantics that prior noise-suppression methods incorrectly discard, and a hierarchical decoder that enforces structural consistency across scales to sharpen boundaries on thin objects. Experiments on the MFNet dataset demonstrate that CLARITY establishes a new state-of-the-art (SOTA), achieving 62.3% mIoU and 77.5% mAcc.

20.
arXiv (CS.AI) 2026-06-12

APCyc: Property-Informed Design of Cyclic Peptides via Automated Cyclization

arXiv:2606.12991v1 Announce Type: new Abstract: Cyclic peptides represent a promising class of therapeutic compounds in modern drug discovery, often offering improved stability and binding affinity. However, the de novo design of cyclic peptides remains challenging because methods must identify pocket-adaptive cyclization patterns and linkage sites while simultaneously controlling drug-relevant properties. This challenge is particularly pronounced for recent generative models trained predominantly on linear peptide data, which may fail to capture cyclization-specific constraints. To address the limitation, we introduce APCyc, a target-aware de novo cyclic peptide generation framework that explicitly models cyclization and jointly optimizes multiple essential physicochemical properties. By using an expanded residue vocabulary and explicitly encoding cyclization-site and linkage-type information, APCyc learns cyclization-aware representations and leverages Bayesian posterior guidance to steer sampling toward cyclic peptides satisfying multiple property objectives. Experimental results demonstrate that our model learns target-dependent cyclization preferences, and enables effective and controllable multi-property optimization for cyclic peptide design. The source code of this paper is available at https://github.com/HKUSTGZ-ML4Health-Lab/APCyc.

21.
arXiv (quant-ph) 2026-06-12

Quantum Logic Codes: Complete Transversal Logical Clifford Instruction Sets for High-Rate Stabilizer Quantum Error Correcting Codes

作者:

arXiv:2606.13521v1 Announce Type: new Abstract: We study the structure and transversal logical capabilities of stabilizer quantum error correcting codes. Among our results, we identify universal lower bounds on circuit depth to generate a full logical Clifford algebra, and develop novel constructions of logical transversal gates including a new depth-one transversal phase $\mathrm{\overline{S}}$ gate in the rotated surface code and a depth-one intra-block $\mathrm{\overline{CZ}}$ gate in the 2D-toric code that generalizes to all odd distances and all lengths $L\ge3$, respectively. Finally, we construct a high-rate non-LDPC CSS code family with parameters $[[n,\sqrt{n},\Theta({n^{\beta}})]]$ where $\beta \approx 0.2823$ in one demonstrated case, that provably possesses a constant-depth complete 2-local transversal logical Clifford basis instruction set architecture (ISA) composed of all individually targeted $\mathrm{\overline{S}}$, $\mathrm{\overline{SHS}} = \sqrt{X}$, and $\mathrm{\overline{CZ}}$ gates. This ISA is depth-one for certain subfamilies that we design and generally constant-depth under certain conditions. The code family is built from a small code with parameters $[[n_0, 2, d_0]]$, and is tunable in the standard way: it tiles out to form utility-scale logical qubit counts, and it scales up through concatenation to achieve higher distances and error suppression. We show that this construction preserves the depth-one complete transversal logical Clifford basis ISA when composed with these commuting construction actions, inheriting structure from the core codes so that at scale the complete logical Clifford basis ISA remains depth-one up to depth-two addressable operations between tiled cores. We call these Quantum Logic Codes.

22.
arXiv (CS.AI) 2026-06-11

On the Limits of LLM-as-Judge for Scientific Novelty Assessment

arXiv:2606.12071v1 Announce Type: cross Abstract: LLMs are increasingly used to generate and judge scientific ideas. This makes novelty evaluation a central problem. Full idea evaluation is difficult because it often requires judging a method, its feasibility, and its empirical promise. We therefore study a cleaner upstream object: the research question (RQ). RQ generation is a prerequisite for scientific ideation, and RQs can be compared against questions pursued in real papers. We introduce RQ-Bench, a benchmark built from recent arXiv papers. For each paper, we reconstruct author-anchored RQs from its cited background, gaps, and contributions. These RQs are not the only valid questions for the same background. They are author-anchored reference points for testing novelty judgments. We evaluate model-generated RQs with standalone LLM judging, comparative LLM judging, and human expert evaluation. LLM judges consistently rate model-generated RQs as highly novel, producing a novelty mirage; in comparative evaluations, this preference becomes even stronger. Domain experts, however, reach the opposite conclusion and prefer the author-anchored reference questions. We further find that many generated RQs are narrow or source-bound, a dimension that LLM judges often miss unless explicitly tested. Overall, the contradictory novelty evaluations between LLM judges and human experts raise a serious concern about the reliability of using LLMs to assess the scientific novelty of research questions.

23.
arXiv (math.PR) 2026-06-16

Mean-field BSDEs with non-Lipschitz coefficients and double mean reflections

arXiv:2510.11228v2 Announce Type: replace Abstract: The present paper is devoted to the study of mean-field backward stochastic differential equations (MFBSDEs) with double mean reflections whose generators are not Lipschitz continuous. With the help of the Skorokhod problem and some a priori estimates for MFBSDEs, we establish the existence and uniqueness results for doubly mean reflected MFBSDEs.

24.
arXiv (CS.CV) 2026-06-19

CalTennis: Large Multi-View Tennis Video Dataset and Benchmark of Monocular-to-3D Pose Estimation

The Caltech Tennis Dataset (CalTennis) is a large-scale video benchmark for evaluating monocular-to-3D pose estimation in the wild. CalTennis comprises over 11 million frames (51 hours) of tennis practice and match play from 40 players, captured with 2-6 synchronized cameras at 60 Hz. It is 10 times larger than existing in-the-wild human motion video datasets and 3 times larger than existing MOCAP-ground-truthed datasets, and it is the first large-scale benchmark to provide synchronized multi-view recordings of expert athletic motion. The multi-view setup enables inexpensive, label-free evaluation of monocular-to-3D pose estimation algorithms. We describe a simple, standardized protocol that enables data collection without specialized equipment or expertise, along with fully automated video calibration and synchronization. Benchmarking state-of-the-art monocular-to-3D pose methods on CalTennis, we find that while 3D joint angle recovery is now quite accurate, all models struggle to estimate depth and foot contact consistently. We further propose two novel performance metrics, footwork and stability, as well as qualitatively study body shape inconsistency. These metrics expose previously underexplored failure modes and point to concrete opportunities for improvement in pose estimation and action analysis.

25.
bioRxiv (Bioinfo) 2026-06-16

Programmatic access to ICTV virus taxonomy through a public ontology API

The International Committee on Taxonomy of Viruses (ICTV) is responsible for developing and maintaining a universal virus taxonomy. As the reference framework for organising the viral world, it is essential for virology and related fields. Despite its widespread use in research and public health, programmatic access to ICTV taxonomy has remained limited, posing challenges for integration, versioning, and interoperability across databases and bioinformatics resources requiring up-to-date virus taxonomy. To address this, we developed a public and sustainable solution leveraging ontology-based APIs. Successive ICTV Master Species List (MSL) releases were transformed into a structured ontology and deployed as a unified representation through the Ontology Lookup Service (OLS). The framework also provides ICTV-NCBI mappings and helper libraries for integration into downstream systems. This enables, for the first time, public programmatic retrieval of current and historical virological taxon names, taxonomic relationships, metadata, and persistent identifiers through stable endpoints. More broadly, this work illustrates a general strategy for transforming structured biological datasets into semantically enriched graph resources exposed through scalable public APIs. These developments enhance interoperability, reduce manual curation, and support FAIR-aligned taxonomic data management in virology and pandemic preparedness.