Academic Intelligence · Curated Daily

探索全球前沿学术脉络

AcademicHub 汇聚顶级期刊与预印本平台的实时文献。定制您的专属科研雷达,利用大语言模型自动生成交叉领域文献分析简报。

01.
arXiv (CS.CV) 2026-06-16

Deep Residual Injection for Full-Spectrum Forensic Signal Perception in Multimodal Large Language Models

Multimodal large language models (MLLMs) have been increasingly adopted in forensics for their robust semantic understanding. As AI-generated images become realistic, semantic-level inconsistencies alone are often insufficient for reliable detection. This motivates a critical question: whether MLLMs can achieve full-spectrum forensic signal perception, i.e., capturing low-level generator artifacts without sacrificing pre-trained semantic knowledge. We further perform a layer-wise analysis of forensic signal perception in MLLMs, showing that semantic information is primarily formed in the early-to-middle layers, whereas direct fine-tuning for artifact learning disrupts these semantic representations. Based on this insight, we propose Deep Visual Residual MLLM (Deep-VRM) to preserve early semantic processing while injecting artifact-specific visual signals as a residual path into an intermediate layer, where they are fused with semantic token representations and propagated through subsequent trainable layers. This enables later layers to jointly model semantic reasoning and signal-level forensic cues, and surprisingly, the model learns to adaptively leverage different levels of forensic signals depending on the input, achieving robust and generalizable detection performance. Extensive experiments show that our method achieves state-of-the-art across most benchmarks. The code and data are available at https://github.com/KQL11/Deep-VRM.

02.
arXiv (CS.CV) 2026-06-16

A Survey on 3D Skeleton Based Person Re-Identification: Taxonomy, Advances, Challenges, and Interdisciplinary Prospects

Person re-identification via 3D skeletons is an important emerging research area that attracts increasing attention within the pattern recognition community. With distinctive advantages across various application scenarios, numerous 3D skeleton based person re-identification (SRID) methods with diverse skeleton modeling and learning paradigms have been proposed in recent years. In this paper, we provide a comprehensive review and analysis of recent SRID advances. First of all, we define the SRID task and provide an overview of its origin and major advancements. Secondly, we formulate a systematic taxonomy that organizes existing methods into three categories centered on hand-crafted, sequence-based, and graph-based modeling. Then, we elaborate on the representative models along these three types with an illustration of foundational mechanisms. Meanwhile, we provide an overview of mainstream supervised, self-supervised, and unsupervised SRID learning paradigms and corresponding common methods. A thorough evaluation of state-of-the-art SRID methods is further conducted over various types of benchmarks and protocols to compare their effectiveness, efficiency, and key properties. Finally, we present the key challenges and prospects to advance future research, and highlight interdisciplinary applications of SRID with a case study.

03.
arXiv (CS.CV) 2026-06-17

DiffAttn: Diffusion-Based Drivers' Visual Attention Prediction with LLM-Enhanced Semantic Reasoning

Drivers' visual attention provides critical cues for anticipating latent hazards and directly shapes decision-making and control maneuvers, where its absence can compromise traffic safety. To emulate drivers' perception patterns and advance visual attention prediction for intelligent vehicles, we propose DiffAttn, a diffusion-based framework that formulates this task as a conditional diffusion-denoising process, enabling more accurate modeling of drivers' attention. To capture both local and global scene features, we adopt Swin Transformer as encoder and design a decoder that combines a Feature Fusion Pyramid for cross-layer interaction with dense, multi-scale conditional diffusion to jointly enhance denoising learning and model fine-grained local and global scene contexts. Additionally, a large language model (LLM) layer is incorporated to enhance top-down semantic reasoning and improve sensitivity to safety-critical cues. Extensive experiments on four public datasets demonstrate that DiffAttn achieves state-of-the-art (SoTA) performance, surpassing most video-based, top-down-feature-driven, and LLM-enhanced baselines. Our framework further supports interpretable driver-centric scene understanding and has the potential to improve in-cabin human-machine interaction, risk perception, and drivers' state measurement in intelligent vehicles.

05.
arXiv (CS.LG) 2026-06-16

Peak-Based Nuclide Identification in HPGe $\gamma$-Spectrometry with Machine Learning and SHAP

arXiv:2606.14874v1 Announce Type: cross Abstract: High-purity germanium gamma spectra often require time-consuming analyses from subject matter experts. Photopeaks within these spectra are carefully fitted and numerical methods are employed to assist with nuclide identification (NID) and quantification. Amending the list of nuclides identified by analysis software can be nontrivial. When many samples need to be analyzed, it is therefore challenging to make timely and correct decisions. Supervised machine-learning-based NID can serve as an expert-informed, automated tool to improve the initial set of radionuclides suggested to an analyst and more effectively drive subsequent quantification. To that end, we implemented machine learning models that map photopeaks carefully fitted by analysts to NID results for experimental spectra containing various isotopic combinations drawn from a set of 65 isotopes. The best model achieved an F1 score of 0.97, markedly surpassing the F1 score of 0.84 achieved by traditional software when compared using a nuclide library comprising the same 65 isotopes assessed by the models. Finally, we illustrated the most important input features for model predictions using Shapley Additive Explanations. These explanations revealed that the models use physically relevant photopeaks when making predictions for the isotopes in our nuclide library.

06.
arXiv (CS.LG) 2026-06-19

An Information Theoretic Framework for Graph Novelty Generation via Latent Mixture Modeling

arXiv:2606.19770v1 Announce Type: new Abstract: We propose an information-theoretic framework for graph novelty generation, which aims to generate data that are distinct from existing patterns while preserving global structural consistency. Our approach embeds data into a latent space, models the latent distribution using finite mixture models, and generates novel samples by imposing explicit novelty and reliability conditions formulated in terms of description length. Specifically, novelty is enforced by requiring generated samples to be poorly explained by all existing mixture components, while reliability constrains their impact on the overall mixture structure under the Minimum Description Length (MDL) principle. We provide a theoretical analysis showing that, with appropriate threshold choices, the probabilities of misclassifying non-novel or unreliable samples converge to zero with explicit rates. Experiments on synthetic and benchmark graph datasets demonstrate that the proposed method enables principled novelty generation with quantifiable risk.

07.
bioRxiv (Bioinfo) 2026-06-10

GEOAgent: An AI-driven Autonomous Framework for Intelligent GEO Data Retrieval and Standardized Preprocessing

Datasets in the Gene Expression Omnibus (GEO) remain difficult to reuse at scale because sample annotations are heterogeneous and raw sequencing data require assay-specific preprocessing. We present GEOAgent, an AI-driven autonomous framework designed for intelligent dataset retrieval and standardized preprocessing by coupling autonomous semantic governance with an automated Nextflow pipeline named bioStream. Metadata from 181,760 sequencing series and 84,756 associated PubMed records were organized in a relational database and semantic index to support natural-language dataset retrieval. The framework automatically determines assay modalities, resolves experimental design pairings, and standardizes sample naming to minimize manual curation overhead. Based on these parsed attributes, the framework generates deployment-ready manifests to automatically execute containerized workflows across bulk and single-cell omics modalities. In expert-curated benchmarks, the workflow achieved 96% retrieval precision alongside 100% accuracy in assay classification and sample relationship resolution. The web platform is publicly accessible, while the source code and associated databases are openly available via GitHub and Zenodo.

08.
arXiv (quant-ph) 2026-06-17

SPICE-Q and Large-Scale Quantum Chip Production

arXiv:2606.17907v1 Announce Type: new Abstract: We propose SPICE-Q, a SPICE-inspired design-technology co-optimization framework for superconducting quantum processors. Rather than replacing tools such as HFSS, Qiskit Metal, pyEPR, SQcircuit, SQuADDS, scqubits, or QuTiP, SPICE-Q aims to connect them through a unified, traceable data chain spanning process rules, layout, electromagnetic simulation, energy-participation-ratio and circuit quantization, Hamiltonian extraction, noise analysis, cryogenic test, and manufacturing feedback. The central mapping is from process and PDK constraints to layout geometry, electromagnetic modes, equivalent circuit parameters, effective Hamiltonians, and finally metrics such as frequency, coupling, anharmonicity, decoherence, readout performance, and yield. This flow must capture Josephson-junction variability, transmon frequency allocation, resonator and Purcell constraints, coupler crosstalk, microwave routing, 3D interconnects, material/interface loss, package modes, and wafer-scale process statistics. By introducing standardized model interfaces, statistical parameter models, model cards, version governance, and closed-loop calibration from cryogenic and fabrication data, SPICE-Q frames superconducting quantum-chip design as an engineering workflow rather than a collection of isolated simulations. We argue that scalable and fault-tolerant quantum processors will require such a continuous model chain from device physics and electromagnetic fields to quantum dynamics, noise, manufacturability, and system-level yield.

09.
arXiv (CS.CV) 2026-06-19

HypOProto: Hyperbolic Ordinal Prototypes for Left Ventricular Filling Pressure Classification

Echocardiography (echo) is a widely used imaging modality for assessing cardiac function, with Left Ventricular Filling Pressure (LVFP) serving as a critical physiological marker for conditions such as heart failure. Standard LVFP classification into normal vs elevated categories relies on the Doppler-derived $E/e'$ ratio, which is operator-dependent and often unavailable in resource-limited settings, motivating methods that infer LVFP directly from B-mode echo. Existing deep learning approaches achieve high performance but remain largely black-box, limiting clinical interpretability. We propose HypOProto, a hyperbolic, ordinal prototype-based framework for interpretable LVFP classification using a frozen, explainable foundation model backbone. HypOProto arranges prototypes along the physiological $E/e'$ scale, placing borderline cases near the hyperboloid root where small angular differences separate similar cases, while normal and elevated cases occupy outward positions reflecting increasing diagnostic certainty. This hyperbolic geometry encodes clinically meaningful ordinal relationships and improves interpretability. We also introduce a novel Hyperbolic Prototype Angular Separation (HyperPAS) loss, enforcing inter-class prototype separation in hyperbolic space. HypOProto achieves SOTA performance while maintaining transparency, and highlights clinically relevant regions in visualizations. This work represents the first prototype-based framework for LVFP classification in echo. Our code can be found at https://github.com/DeepRCL/HypOProto.

10.
arXiv (CS.AI) 2026-06-18

Scalable Batch Bayesian Optimization Via Subspace Acquisition Functions

arXiv:2411.16206v3 Announce Type: replace-cross Abstract: Extending Bayesian optimization to batch evaluation can enable the designer to make the most use of parallel computing technology. However, most of current batch approaches do not scale well with the batch size. That is, their optimization efficiencies often deteriorate as the batch size increases. To address this issue, we propose a simple and efficient approach to extend Bayesian optimization to large-scale batch evaluation in this work. Different from existing batch approaches, the idea of the new approach is to draw a batch of axis-aligned subspaces of the original problem and select one point from each subspace using existing acquisition functions. Numerical experiments show that our proposed approach speedups the convergence significantly when compared with the sequential Bayesian optimization algorithm, and performs very competitively when compared with ten batch Bayesian optimization algorithms. The implementation of our proposed approach is available at https://github.com/zhandawei/SubSpace_Acquisition_Functions.

11.
arXiv (CS.AI) 2026-06-17

From Noise to Order: Learning to Rank via Denoising Diffusion

arXiv:2602.11453v3 Announce Type: replace-cross Abstract: Learning-to-rank (LTR) methods have traditionally been limited to discriminative machine learning approaches that model the probability of the document being relevant to the query given some feature representation of the query-document pair. We propose an alternative denoising diffusion-based generative approach to LTR that instead models the full joint distribution over features and relevance labels. While in discriminative LTR, an over-parameterized ranking model may find different ways to fit the training data, we posit that candidate solutions that can explain the full data distribution under the generative setting maybe better at estimating relevance. Thus, we propose DiffusionRank that extends TabDiff, an existing diffusion model for tabular datasets, to create generative alternatives to classical discriminative pointwise and pairwise LTR objectives. Our work demonstrates improvements from DiffusionRank over discriminative counterparts on four standard LTR datasets and points to a rich space for future exploration to leverage ongoing advancements in deep generative models for LTR. Our code is publicly available at https://github.com/sadjadeb/DiffusionRank.

12.
arXiv (CS.LG) 2026-06-12

Distribution-Agnostic Robust Trajectory Optimization via Chance-Constrained Reinforcement Learning

arXiv:2606.13605v1 Announce Type: cross Abstract: This paper presents a distribution-agnostic robust trajectory-optimization framework based on chance-constrained reinforcement learning. The uncertainty is represented here through initial conditions and process noise, with the only requirement being that it can be sampled. A deterministic nominal trajectory is first computed offline, and reinforcement learning is then used only to robustify that baseline through a structured affine closed-loop correction law comprising a feedforward control adjustment and time-varying feedback gains. Probabilistic feasibility is enforced empirically through rollout-based upper-tail quantiles, while terminal dispersion is regulated through covariance-feasibility penalties. The framework is assessed on two materially different trajectory design problems. The flagship case study is a three-dimensional multi-impulse Earth-Mars transfer, where the learned policy is benchmarked against a recent robust trajectory-optimization reference under Gaussian uncertainty and then evaluated under bounded uniform uncertainty and under process disturbances not seen during training. The second case study is a stochastic atmospheric pinpoint rocket landing problem, used to assess portability to a short-horizon continuous-thrust setting with drag, mass depletion, and glide-slope constraints. The results show that the proposed framework can remain competitive in upper-tail fuel cost while preserving probabilistic feasibility, and that the same robustification scaffold can be carried across heterogeneous spacecraft trajectory planning problems without redesign of its core stochastic-control structure.

13.
arXiv (CS.CV) 2026-06-19

CrossFlow: One-Step Generation Across Latent and Pixel Spaces

Most diffusion and flow-matching generators define the prior, probability path, and prediction target in the same representation space. Latent diffusion improves efficiency by moving this path into an autoencoder latent space, but the final sample is still produced by a separately trained decoder. This separation creates a mismatch: the generator is optimized for latent-space prediction, while final quality depends on how the decoder handles generated latents that may differ from clean encoder outputs. We introduce CrossFlow, a cross-space flow formulation that maps noisy latent inputs directly to pixel-space images. The key technical step is a velocity-free one-step objective: the latent trajectory defines the training path, but the supervised prediction is an image rather than a latent displacement. This lets one model act both as a one-step latent-to-pixel generator and as a decoder replacement for latent diffusion pipelines. On class-conditional ImageNet-1k at $256\times256$, CrossFlow-XL achieves 1.62 FID with one function evaluation. Ablations show that the latent encoder and pixel-space perceptual and adversarial losses are important for fidelity. These results indicate that cross-space flow objectives can combine the efficiency of latent representations with direct pixel-space supervision, without requiring a separate decoder at inference.

14.
medRxiv (Medicine) 2026-06-22

Development of a Novel Risk Prediction Model for Rheumatoid Arthritis-Associated Interstitial Lung Disease (RA-ILD): A Longitudinal Study

Background: Interstitial lung disease (ILD) is one of the most common and potentially most devastating extra-articular complication of rheumatoid arthritis (RA) and is associated with substantial morbidity and mortality. However, reliable tools for the early identification of ILD in patients with RA remain limited. This study aimed to identify plasma protein biomarkers of RA-ILD and develop an interpretable machine learning model for risk prediction using data from the UK Biobank. Methods: We first evaluated the association between baseline RA and the risk of incident ILD in the UK Biobank using Cox proportional hazards models. Mendelian randomization analysis was then performed to investigate the potential causal relationship between RA and ILD. Finally, we analyzed 2,920 plasma proteins measured using the Olink platform in 781 eligible RA patients. Proteins associated with ILD risk were identified using Cox proportional hazards models and subsequently used to construct eight machine learning models. Model performance was assessed using the receiver operating characteristic curve (ROC) and decision curve analysis. The best-performing model was further interpreted using Shapley additive explanations (SHAP) to evaluate feature importance. Results: Compared with participants without RA, Patients with baseline RA had a significantly higher risk of developing ILD (Hazard ratio: 4.425, 95% CI: 3.549,5.518). The MR supported a potential causal association between RA and ILD (Odds ratio: 1.227, 95% CI: 1.121,1.343). Among the eight machine learning models, the CatBoost model showed the best performance, achieving an area under the curve (AUC) of 0.884 (95% CI: 0.773,0.996). The SHAP analysis identified LAG3, NPC2, and LAMP3 are the three most important plasma protein predictors of ILD development in patients with RA. Conclusion: Plasma proteomics combined with machine learning may provide a promising approach for identifying biomarkers and predicting ILD risk in patients with RA. LAG3, NPC2, and LAMP3 may serve as candidate biomarkers for RA-ILD and warrant further validation. Keywords: Rheumatoid arthritis, Interstitial lung disease, Mendelian randomization, Machine learning, Plasma proteins.

15.
arXiv (CS.CV) 2026-06-16

DiverseDiT: Towards Diverse Representation Learning in Diffusion Transformers

Recent breakthroughs in Diffusion Transformers (DiTs) have revolutionized the field of visual synthesis due to their superior scalability. To facilitate DiTs' capability of capturing meaningful internal representations, recent works such as REPA incorporate external pretrained encoders for representation alignment. However, the underlying mechanisms governing representation learning within DiTs are not well understood. To this end, we first systematically investigate the representation dynamics of DiTs. Through analyzing the evolution and influence of internal representations under various settings, we reveal that representation diversity across blocks is a crucial factor for effective learning. Based on this key insight, we propose DiverseDiT, a novel framework that explicitly promotes representation diversity. DiverseDiT incorporates long residual connections to diversify input representations across blocks and a representation diversity loss to encourage blocks to learn distinct features. Extensive experiments on ImageNet 256x256 and 512x512 demonstrate that our DiverseDiT yields consistent performance gains and convergence acceleration when applied to different backbones with various sizes, even when tested on the challenging one-step generation setting. Furthermore, we show that DiverseDiT is complementary to existing representation learning techniques, leading to further performance gains. Our work provides valuable insights into the representation learning dynamics of DiTs and offers a practical approach for enhancing their performance.

16.
arXiv (CS.AI) 2026-06-15

STaR-DRO: Stateful Tsallis Reweighting for Group-Robust Structured Prediction

arXiv:2604.09737v2 Announce Type: replace-cross Abstract: Structured prediction with large language models requires outputs that are label-accurate, ontology-constrained, structurally valid, and evidence-grounded under label imbalance and heterogeneous group difficulty. We present a unified framework for ontology-constrained generation. First, we introduce a modular prompt-engineering architecture combining XML-style structure, expert disambiguation rules, chain-of-thought reasoning, metadata-aware decision logic, schema contracts, and a self-validation gate. It targets recurrent in-context failures, including format drift, label ambiguity, evidence hallucination, and metadata-conditioned confusion. Second, we propose STaR-DRO, combining Tsallis mirror ascent, sparse entmax-style primal mapback, EMA-smoothed group-loss tracking, rescaled ascent signals, and bounded excess-only multipliers. Unlike conventional DRO, which relies on dense Shannon-entropy exponentiated-gradient updates, can introduce high-variance stochastic reweighting, assigns positive adversarial mass to groups that are not persistently hard, and incurs costs through simplex competition, STaR-DRO upweights only persistently hard groups without suppressing easier ones. We evaluate the framework on EPPC Miner, a clinically grounded high-stakes structured-prediction task requiring hierarchical label prediction and evidence-span extraction from patient-provider secure messages. Across 1B-70B Llama models, prompt engineering improves zero-shot extraction, yielding an average label F1 gain of +14.46 and a Span F1 gain of +17.40. Building on supervised fine-tuning, STaR-DRO further improves accuracy and robustness, increasing average label F1 by +1.08 and +2.20 while reducing mean groupwise validation cross-entropy by 21.3% and 14.8% relative to SFT and standard DRO, respectively. These results advance reliable automated communication mining for patient-centered clinical care analysis.

17.
arXiv (CS.CV) 2026-06-16

Latent Space Reinforcement Learning for Inverse Material Estimation in Food Fracture Simulation

Realistic visual simulation of food manipulation requires accurate material parameters, yet these are difficult to measure directly and vary across the heterogeneous regions of a single food item. We address the inverse problem of estimating material parameters from a target description of fracture behavior in a non-differentiable continuum damage mechanics simulator. Using orange peeling as a test case, we train a neural surrogate on 2,000 forward simulations and compare Covariance Matrix Adaptation Evolution Strategy (CMA-ES, a gradient-free evolutionary optimizer) with Proximal Policy Optimization (PPO, a reinforcement learning algorithm) across the original 9-dimensional parameter space and two learned 4-dimensional latent representations. Since different oranges have different material properties, a practical inverse system must handle arbitrary targets without retraining. We train a goal-conditioned PPO policy that learns a general inverse mapping: given any target description of peeling behavior, the policy produces a material parameter estimate in a single forward pass (8 surrogate evaluations, approximately 10ms). Operating in a normalizing flow latent space with a shared surrogate evaluator, the goal-conditioned policy achieves 0.642 actual recovery when validated through the simulator, outperforming the original parameter space by 23%. A warm-start extension that initializes CMA-ES refinement from the policy's output further improves recovery to 0.828 with 540 evaluations. These findings provide a practical framework for inverse food physics and lay groundwork for vision-driven material identification from video observations of food manipulation.

18.
Science (Express) 2026-06-18

Dynamic asymmetric strain imprinted into substrates by an oxide thin film | Science

作者: 未知作者

In film-substrate systems, the substrate role is often considered to be limited to providing static mechanical constraints. Dynamic film-substrate interactions when a structural change in the film modifies the substrate are generally disregarded. Using combined X-ray and electron microscopies, we observed that the electrically induced filament in a VO 2 film created strong asymmetric strain in the underlying Al 2 O 3 substate. This asymmetric substrate strain fed back into the film and defined the filament expansion direction, revealing the importance of film-substrate dynamic interactions in determining film functionality. Furthermore, the strain imprint propagated at least tens of microns deep into the substrate, exceeding the film thickness more than 200 times, potentially enabling substrate functionalization as an active mechanical coupling media in 3D-integrated microelectronics architectures.

19.
arXiv (quant-ph) 2026-06-15

Quantum Horizon: An evaluation of quantum computing as a threat to Bitcoin and Ethereum

arXiv:2606.14484v1 Announce Type: new Abstract: Quantum computing poses a real, broad-based, but bounded and substantially mitigable threat to Bitcoin and Ethereum. We separate the two quantum algorithms that public discussion routinely conflates: Shor's algorithm breaks the elliptic-curve signatures (ECDSA over secp256k1, BLS over BLS12-381) that authorize spending, whereas Grover's algorithm does not meaningfully threaten proof-of-work mining, which is protected by a merely quadratic speedup, fault-tolerant per-operation costs, a square-root parallelization wall, and difficulty adjustment. Folding hardware scaling, the falling resource requirement, a fault-tolerance readiness lag, and expert surveys into a single Monte-Carlo forecast yields a wide, bimodal arrival distribution for a cryptographically relevant quantum computer: about a one-in-six chance by 2035, near 30% by 2040, and about 60% by 2050. Exposure is concentrated and mostly migratable: of Bitcoin's roughly six million quantum-exposed coins only about 2.3 million are irreducibly at risk, while 50 to 65% of Ether sits at key-revealed accounts that can adopt post-quantum signatures. A timely migration beats even an optimistic 2035 machine, so the binding constraint is governance, not technology. A survey of the top twenty cryptocurrencies finds none fully post-quantum. Reproducible models accompany every quantitative claim.

20.
arXiv (CS.AI) 2026-06-12

LLM-as-an-Investigator: Evidence-First Reasoning for Robust Interactive Problem Diagnosis

arXiv:2606.13220v1 Announce Type: new Abstract: Large language models (LLMs) are increasingly used as interactive assistants for technical problem solving. However, when users provide incomplete descriptions or plausible but unverified explanations, LLMs may prematurely align with these assumptions and propose solutions before collecting sufficient evidence. We refer to this behavior as user-driven sycophancy: the tendency of an LLM to reinforce a user-provided hypothesis instead of testing alternative explanations. This paper introduces LLM-as-an-Investigator, an evidence-first agentic AI methodology for robust problem diagnosis. The approach is implemented through a Solution Investigator Agent, which estimates the ambiguity of an initial problem description, generates candidate hypotheses, asks targeted clarification questions, and updates hypothesis probabilities after each answer. Rather than producing an immediate response, the agent continues the investigation until the evidence makes one candidate explanation stronger than the alternatives. To evaluate the approach, we build a benchmark from solved technical forum threads in mechanical, electrical, and hydraulic domains. We use a three-agent evaluation pipeline in which a Problem-Solution Extractor Agent converts solved threads into structured cases, a Ground-Truth Evaluator Agent simulates the user while hiding the known solution, and the tested assistant attempts to recover the solution through dialogue. The experiments compare standard assistants, reasoning-oriented LLMs, and the proposed investigator-based model across LLM backbones. In addition to diagnostic accuracy, we analyze how standard assistants follow misleading user hypotheses in diagnostic cases. The results show that the proposed approach identifies the problem more accurately than direct prompting and reasoning-only baselines, while its evidence-first protocol helps reduce user-induced conversational bias.

21.
arXiv (CS.AI) 2026-06-19

Optimal Scheduling in a Question-Answering Forum of Knowledge Workers

arXiv:2606.19759v1 Announce Type: new Abstract: As individuals turn to the Internet to find answers to questions they may have, several Question Answering (QA) forums have evolved, where users knowledgeable in certain topics can contribute their expertise to answering these requests for information. While these are currently volunteer based, we consider a future version employing knowledge workers who are experts in certain topics. In such a system, the request-answer processes forming the queuing system may utilize schedulers that assign requests in different topics to the experts in the forum, who may be able to answer them according to their expertise levels in different topics. With this model, we calculate the capacity of the system for handling the requests while keeping the system stable, and design schedulers that achieve capacity. We also investigate how collaboration between experts in answering requests can potentially increase capacity.

22.
arXiv (CS.CL) 2026-06-15

Indirect Computing Model with Indirect Formal Method

作者:

This paper,from the perspective of a collaborative intelligent computing system formed by combining human-computer interface and collaborative computing programs, discusses the principles of optimized cloud computing technology supported by the combination of an indirect computing model and an indirect formal method. On the basis of systematically reviewing the influence of previous theoretical achievements Turing's computability theory,Kleene's formal theory of small strings,von Neumann's digital computer architecture and Turing's hypothesis on AI judgment on the mainstream general-purpose digital computer paradigm,the author focuses on introducing an indirect computing model and an indirect formal theory compatible with both large and small strings. Using Chinese information data as an example,the design concept of a collaborative intelligent computing system prototype is presented. The significance is that this achievement facilitates optimization of cloud computing from data centers to knowledge centers.

23.
arXiv (CS.LG) 2026-06-19

Evaluating Universal Machine Learning Force Fields Against Experimental Measurements

arXiv:2508.05762v2 Announce Type: replace-cross Abstract: Universal machine learning force fields (UMLFFs) promise to revolutionize materials science by enabling rapid atomistic simulations across the periodic table. However, their evaluation has been limited to computational benchmarks that may not reflect real-world performance. We introduce UniFFBench, a comprehensive evaluation framework featuring the MinX dataset – a diverse collection of 1,500+ mineral systems spanning 85 elements, extreme thermodynamic conditions (0–5000 K, 0–1000 GPa), and structural complexity, including partial occupancy and disorder. This diversity, combined with experimental reference values for validation, enables assessment of UMLFF generalization across chemical space and conditions substantially beyond typical training scenarios. Our systematic evaluation of six state-of-the-art UMLFFs reveals a substantial ``reality gap'': models achieving impressive performance on computational benchmarks often fail when confronted with experimental complexity. Even the best-performing models exhibit higher density prediction error than the threshold required for practical applications. We observe disconnects between simulation stability and mechanical property accuracy, with prediction errors correlating with training data representation rather than the modeling method.

24.
arXiv (quant-ph) 2026-06-11

A quantum implementation of high-order power method for estimating geometric entanglement of pure states

arXiv:2405.19134v3 Announce Type: replace Abstract: Entanglement is one of the fundamental properties of a quantum state and is a crucial differentiator between classical and quantum computation. There are many ways to define entanglement and its measure, depending on the problem or application under consideration. Each of these measures may be computed or approximated by multiple methods. However, hardly any of these methods can be run on near-term quantum hardware. This work presents a quantum adaptation of the iterative high-order power method for estimating the geometric measure of entanglement of multi-qubit pure states using rank-1 tensor approximation. This method is executable on early fault-tolerant (hybrid) quantum hardware and does not depend on quantum memory. We simulate this algorithm and mitigate the effects of noise on the results of the computation using a theoretical model based on a known mitigation approach, which assumes a global depolarising noise channel.

25.
Nature (Science) 2026-06-17

Structure of the pre-initiation complex explains CMGE biogenesis

When cells enter S phase, bidirectional DNA replication is initiated through the kinase-regulated recruitment of three activators (Cdc45, GINS and Pol ε) to a duplex-DNA-loaded double hexamer of minichromosome maintenance (MCM) ATPases. Together, these proteins form two CMGE helicases that establish divergent replication forks as they become separated1. Here, to gain an understanding of CMGE biogenesis, we reconstituted the pre-initiation complex with purified yeast proteins. The cryo-electron-microscopy structure shows a set of firing factors caught in the act of assembling two symmetrical CMGEs. We show how stepwise complex formation reshapes MCM in preparation for DNA opening, and we explain how ATP promotes firing-factor ejection and CMGE maturation. We find that although Sld2 facilitates the recruitment of GINS to MCM, as expected, it also aids the efficient separation of the CMGE dimer, and is essential for the ejection of the lagging strand from MCM. These findings have direct implications for our understanding of the metazoan Sld2 orthologue, RECQL4, and point to a replication-fork establishment mechanism that is conserved across eukaryotes. Cryo-electron microscopy and biochemical reconstitution experiments in yeast provide insight into the assembly of the CMGE complex, a helicase that establishes bidirectional DNA replication in eukaryotic cells, and elucidate the role of the firing factor Sld2.