Correction: Viral escape-inspired framework for structure-guided dual bait protein biosensor design
by Yee Chuen Teoh, Mohammed Sakib Noor, Sina Aghakhani, Jack Girton, Guiping Hu, Ratul Chowdhury
Academic Intelligence · Curated Daily
AcademicHub 汇聚顶级期刊与预印本平台的实时文献。定制您的专属科研雷达,利用大语言模型自动生成交叉领域文献分析简报。
by Yee Chuen Teoh, Mohammed Sakib Noor, Sina Aghakhani, Jack Girton, Guiping Hu, Ratul Chowdhury
arXiv:2511.20868v2 Announce Type: replace-cross Abstract: Superconducting nanowire single-photon detectors (SNSPDs) are among the most sensitive single-photon detectors available and have the potential to transform fields ranging from infrared astrophysics to molecular spectroscopy. However, extending their performance into the mid-infrared spectral region - crucial for applications such as exoplanet transit spectroscopy and vibrational fingerprinting of molecules - has remained a major challenge, primarily due to material limitations and scalability constraints. Here, we report on the development of SNSPDs based on tungsten germanide, a novel material system that combines high mid-infrared sensitivity with compatibility for large-scale fabrication. Our detectors exhibit saturated internal detection efficiency at wavelengths up to 29 {\mu}m, while using 2.7x thicker films (8 nm vs 3 nm) and up to 4.5x wider nanowires (360 nm vs 80 nm) compared to mid-infrared-optimized SNSPDs fabricated from tungsten silicide. This advance will enable scalable, high-performance single-photon detection in a spectral region that was previously inaccessible, opening new frontiers in remote sensing, thermal imaging, environmental monitoring, molecular physics, and astronomy.
Object pose estimation is crucial to many industrial applications, with one example being automated spray painting using a robot. However, confidentiality concerns often limit access to high-quality 3D models, posing a significant challenge for point-cloud-based pose estimation. In such scenarios, rotational symmetry, a readily accessible characteristic of many industrial objects, can provide valuable prior information to facilitate pose estimation.In this paper, we propose a method that leverages the rotational symmetry commonly found in industrial objects to address the challenge caused by the absence of 3D models. The object pose is jointly estimated with point cloud refinement through an iterative optimization process. This optimization relies on a rotational symmetry constraint loss. To construct this loss, each 3D point is rotated according to the currently estimated pose, and multiple correspondences are identified using nearest-neighbor search by exploiting the rotational symmetry property. These correspondences are then used to compute the rotational symmetry constraint loss, which iteratively refines both the pose and the point cloud.By explicitly incorporating rotational symmetry into the optimization process, the proposed method achieves robust pose estimation and generalizes well across diverse object types. The proposed method is evaluated on a dataset specifically created for point clouds without known 3D models, consisting of four categories of synthetic objects and one real wheel hub collected from a production line. Experimental results demonstrate that the proposed method achieves performance comparable to methods that rely on known 3D models.
We introduce HK-LegiCoST, a new three-way parallel corpus of Cantonese-English translations, containing 600+ hours of Cantonese audio, its standard traditional Chinese transcript, and English translation, segmented and aligned at the sentence level. We describe the notable challenges in corpus preparation: segmentation, alignment of long audio recordings, and sentence-level alignment with non-verbatim transcripts. Such transcripts make the corpus suitable for speech translation research when there are significant differences between the spoken and written forms of the source language. Due to its large size, we are able to demonstrate competitive speech translation baselines on HK-LegiCoST and extend them to promising cross-corpus results on the FLEURS Cantonese subset. These results deliver insights into speech recognition and translation research in languages for which non-verbatim or ``noisy'' transcription is common due to various factors, including vernacular and dialectal speech.
A quantum computer based on trapped ions can connect any two quantum bits, reaching performance levels that conventional computers cannot match. A quantum computer based on trapped ions can connect any two quantum bits, reaching performance levels that conventional computers cannot match.
by Nicole A. Swartwood, Nanki Singh, Seyed Alireza Mortazavi, Melike Hazal Can, Hening Cui, Do Kyung Ryuk, Peter MacPherson, Katherine C. Horton, Nicolas A. Menzies Background Global and national initiatives to combat tuberculosis (TB) have expanded over recent years. Despite this, the TB burden remains high in some population groups, with men recognized as having elevated TB risks. Summary measures of sex differences in TB prevalence were last estimated in 2016. Since then, many additional prevalence surveys have been conducted, including in the highest TB burden countries. We conducted a systematic review of sex-stratified TB prevalence survey data published over 1993–2025, to provide updated estimates of male-to-female (M:F) TB prevalence ratios and determine whether sex-related disparities in TB burden have closed over time. Methods and findings We identified surveys reporting community-representative, sex-stratified estimates of pulmonary TB prevalence in low- and middle-income countries (LMICs), including surveys from an earlier review (covering January 1993–March 2016) and a new systematic review (covering 1st December 2015–13th October 2025). This review was prospectively registered with PROSPERO (CRD42024503853) and included searches of PubMed, Embase, Global Health, the Cochrane Library, Africa Index Medicus, LILACS, and SciELO. We extracted data on bacteriologically confirmed and smear-positive TB prevalence among adults (aged ≥ 15 years), stratified by sex. Risk of bias was evaluated using eight criteria specific to prevalence surveys. We fit multi-level Bayesian regression models with study- and country-level random effects to estimate the M:F ratio of TB prevalence (male prevalence divided by female prevalence), overall and for key subgroups. In meta-regression analyses, we estimated how prevalence ratios varied over time and according to known TB risk factors and TB case definitions.We identified 10,124 publications and extracted data from 100 eligible studies representing 102 unique prevalence surveys and 4,658,310 participants (45.6% male) in 33 LMICs. TB prevalence was higher in men than women in 90/102 of the included surveys, with a pooled M:F prevalence ratio of 2.02 (95% credible interval (CrI): 1.71, 2.34) for bacteriologically confirmed TB and 2.38 (95% CrI: 1.91, 2.90) for smear-positive TB. Time trend analyses showed a 2.0% (95% CrI: −0.2, 4.5%) average annual change in the M:F ratio of bacteriologically confirmed TB over the study period. The M:F prevalence ratio was estimated to be higher for countries with greater excess HIV prevalence among men, and countries with greater gender equity (as measured by the United Nation’s Gender Development Index). The estimated M:F prevalence ratio was also higher for surveys that did not restrict testing to individuals reporting TB symptoms. Study limitations include heterogeneity in survey methods and definitions, as well as limited data from the Americas, Eastern Mediterranean, and Europe WHO world regions and post-COVID-19 period. Conclusions Men in LMICs consistently experience TB at a higher prevalence than women. Time trend estimates are uncertain, but consistent with widening sex differences in TB prevalence over the last three decades, despite efforts to address the risk factors underlying this excess TB burden.
arXiv:2601.09693v3 Announce Type: replace Abstract: Structure-based and ligand-based computational drug design have traditionally relied on disjoint data sources and modeling assumptions, limiting their joint use at scale. In this work, we introduce Contrastive Geometric Learning for Unified Computational Drug Design (ConGLUDe), a single contrastive geometric model that unifies structure- and ligand-based training. ConGLUDe couples a geometric protein encoder that produces whole-protein representations and implicit embeddings of predicted binding sites with a fast ligand encoder, removing the need for predefined pockets. By aligning ligands with both global protein representations and multiple candidate binding sites through contrastive learning, ConGLUDe supports ligand-conditioned pocket prediction in addition to virtual screening and target fishing, while being trained jointly on protein-ligand complexes and large-scale bioactivity data. Across diverse benchmarks, ConGLUDe achieves competitive zero-shot virtual screening performance, substantially outperforms existing methods on a challenging target fishing task, and demonstrates state-of-the-art ligand-conditioned pocket selection. These results highlight the advantages of unified structure-ligand training and position ConGLUDe as a step toward general-purpose foundation models for drug discovery.
Abstract (already in the PDF; paste if a box is required): Injury risk prediction in elite football relies almost exclusively on external load metrics derived from GPS tracking, overlooking the molecular state of the athlete. We monitored 26 male players from FC Barcelona's first team across the 2025 calendar year, integrating GPS-derived training load with longitudinal blood-based immune monitoring (systemic inflammation and TCR-derived immune age). Immune age acceleration and inflammation were elevated in the 14 days preceding musculoskeletal injuries. A logistic regression model combining external load, inflammation, immune age acceleration, and career injury history reached an overall AUC of 0.678 and a mean per-player AUC of 0.754 (SD 0.146), improving on a GPS-only baseline of 0.541. Applied to 2026 data, the frozen model ranked players who later sustained non-contact musculoskeletal injuries high in the risk distribution. Together, our data suggest multimodal immune monitoring in elite football to reveal the athlete's internal physiological state, which carries injury-relevant information that external load alone does not capture.
arXiv:2606.07516v2 Announce Type: replace Abstract: This manuscript contains a collection of counterintuitive problems in discrete probability, together with detailed solutions. The dataset was constructed as part of a broader research project investigating the capabilities of the latest-generation Large Language Models (LLMs) in solving discrete probability problems, in order to assess whether LLMs tend to make systematic reasoning errors associated with known cognitive biases. The problems collected here are specifically designed to challenge heuristic reasoning strategies that often lead to intuitively appealing but mathematically incorrect conclusions. The dataset combines several types of problems. Some are adapted from classical probabilistic paradoxes and cognitive-bias literature, while others originate from recreational mathematics sources or were developed by ourselves following similar principles. The primary purpose of this document is to provide a transparent and publicly accessible reference for the problems used in our experimental evaluation of language models, as well as providing detailed human-made solutions. At the same time, we believe that this collection may also prove useful for future research on probabilistic reasoning, cognitive biases, and the evaluation of reasoning capabilities in artificial intelligence systems.
Recent breakthroughs in Diffusion Transformers (DiTs) have revolutionized the field of visual synthesis due to their superior scalability. To facilitate DiTs' capability of capturing meaningful internal representations, recent works such as REPA incorporate external pretrained encoders for representation alignment. However, the underlying mechanisms governing representation learning within DiTs are not well understood. To this end, we first systematically investigate the representation dynamics of DiTs. Through analyzing the evolution and influence of internal representations under various settings, we reveal that representation diversity across blocks is a crucial factor for effective learning. Based on this key insight, we propose DiverseDiT, a novel framework that explicitly promotes representation diversity. DiverseDiT incorporates long residual connections to diversify input representations across blocks and a representation diversity loss to encourage blocks to learn distinct features. Extensive experiments on ImageNet 256x256 and 512x512 demonstrate that our DiverseDiT yields consistent performance gains and convergence acceleration when applied to different backbones with various sizes, even when tested on the challenging one-step generation setting. Furthermore, we show that DiverseDiT is complementary to existing representation learning techniques, leading to further performance gains. Our work provides valuable insights into the representation learning dynamics of DiTs and offers a practical approach for enhancing their performance.
arXiv:2606.18186v1 Announce Type: cross Abstract: Finite-dimensional (FD) diffusion policies exhibit temporal drift owing to discretization artifacts that degrade long-horizon performance (when deployed on physical systems). We introduce a backward Kolmogorov equation that lifts diffusion policies to a Cameron-Martin space – a subset of the Hilbert space. Essentially, replacing stochastic score matching with a deterministic boundary-value PDE problem. Our core innovation thrives on Gaussian measure theory whereupon the diffusion noise covariance operator is realized from a colored noise distribution which prescribes a notion of regularity on samples from the model at inference time. We train the diffusion model with a derived precision-weighted Cameron- Martin loss and a Kolmogorov residual is introduced as a PDE diagnostic during inference. These substitutions yield (i) convergence guarantees where the bound's constants depend on the effective rank of the kernel rather than action dimension, (ii) improved trajectory regularity via spectral weighting, and (iii) a deterministic failure detector without reward signals. Validation across two application domains demonstrates substantial improvements: on the PushT manipulation benchmark, the Cameron-Martin loss achieves a 17% improvement in maximum episode reward (0.95 vs. 0.78 for MSE) and 67.6% reduction in inter-step drifts during inference via the introduced residual magnitude. Similarly, on a 6-station manufacturing line with constant work-in-process (CONWIP) flow control, we achieve 28.4% lower RMSE than classical LSTM baselines; a high starvation-event recall (1.0 in test cycles), and effective bottleneck identification (Precision@1 = 1.0 in test set, 13x signal-to-noise ratio). We then certify the dispatch policies with Hamilton-Jacobi reachability theory which reduces deadlock events by 96% compared to uncontrolled dispatch over 100 simulated runs (351 events prevented).
Clonal haematopoiesis (CH) activates inflammation and increases the risk of atherosclerosis1,2. Whether lifestyle alters CH clone expansion or the phenotypic programming of CH mutant cells, thereby affecting atherosclerosis, is unknown. Here, in humans and mice and across mutations in Jak2, Tet2, Trp53 and Dnmt3a, we demonstrate mutation-dependent responses to sleep and exercise in CH and show that mutant cells are uniquely sensitive to lifestyle. In two human datasets, moderate-to-vigorous physical activity was associated with lower prevalence of non-DNMT3A-driven CH. In atherogenic mice with Jak2V617F or Tet2 loss of function (LOF), but not Trp53 LOF or Dnmt3aR878H CH, uninterrupted sleep or exercise curtails clone expansion. In CH with the Jak2V617F mutation, sleep and exercise reduces clone expansion by selectively reprogramming mutant, but not cohabitant wild type, haematopoietic progenitor cells towards antiproliferative and metabolically healthy phenotypes by tempering bone marrow macrophage–haematopoietic progenitor cell IL-1β signalling. Sleep or exercise also lessens Jak2V617F-driven, Tet2 LOF-driven and Trp53 LOF-driven, but not Dnmt3aR878H-driven, atherosclerosis by locally reprogramming mutant vascular macrophages, independent of peripheral clone dynamics. In Jak2V617F, but not adjacent wild type, aortic macrophages, uninterrupted sleep blunts CLEC4E-dependent inflammasome activation, consequently diminishing lesions. Exercise, meanwhile, activates PAC1+ neurons in the locus coeruleus, raising the levels of peripheral noradrenaline, which signals through adrenergic receptor β2 (ADRβ2) whose expression is preserved by exercise in Jak2V617F, but not cohabitant wild type, aortic macrophages, selectively repressing their inflammatory programming and atherosclerosis. Our findings establish that healthy lifestyles gene-specifically diminish CH and selectively reprogram mutant haematopoietic progenitor cells and macrophages to maintain cardiovascular health. Sleep and exercise can slow clonal haematopoiesis and limit mutant cell-driven atherosclerosis.
arXiv:2412.06133v4 Announce Type: replace-cross Abstract: The interplay between unitary dynamics and quantum measurements induces diverse phenomena in open quantum systems with no counterparts in closed quantum systems at equilibrium. Here, we generally classify Kraus operators and their effective non-Hermitian dynamical generators, thereby establishing the tenfold classification for symmetry and topology of monitored free fermions. Our classification elucidates the role of topology in measurement-induced phase transitions and identifies potential topological terms in the corresponding nonlinear sigma models. Furthermore, we establish the bulk-boundary correspondence in monitored quantum dynamics: nontrivial topology in spacetime manifests itself as topologically nontrivial steady states and gapless boundary states in Lyapunov spectra, such as Lyapunov zero modes and chiral edge modes, leading to the topologically protected slowdown of dynamical purification.
arXiv:2604.23841v2 Announce Type: replace-cross Abstract: Efficiently solving the Job Shop Scheduling Problem in real-world industrial applications requires policies that are both computationally lean and topologically robust. While Reinforcement Learning has shown potential in automating dispatching rules, existing models often struggle with a scalability bottleneck caused by quadratic graph complexity or the architectural overhead of heterogeneous layers. We introduce a unified graph framework that employs feature-based homogenization to project distinct node roles into a shared latent space. This allows a standard homogeneous Graph Isomorphism Network to capture complex resource contention with linear complexity, ensuring low-latency inference for large-scale industrial applications. Our empirical results demonstrate that our framework achieves state-of-the-art performance while exhibiting consistent zero-shot generalization. We identify the job-to-machine ratio as the primary driver of policy effectiveness, rather than absolute problem size. Based on this, we propose a hypothesis of structural saturation, demonstrating that policies trained on critically congested instances ($\mathcal{J} \approx \mathcal{M}$) learn scale-invariant resolution strategies. Agents trained at this saturation point internalize invariant conflict-resolution logic, allowing them to treat massive rectangular instances as a sequential concatenation of saturated sub-problems. This approach eliminates the need for expensive scale-specific retraining and prevents overfitting to statistical shortcuts, providing a robust and efficient pathway for deploying RL solutions in dynamic production environments.
Accurate BRDF acquisition is essential for realistic rendering, but dense gonioreflectometer measurements are slow and expensive. We study how to select a small set of BRDF measurements that is most informative for reconstructing material appearance under a learned BRDF prior. Existing sparse-acquisition methods often optimize samples for BRDF-space reconstruction for all materials, while the perceptual importance of a adaptive measurement ultimately depends on its effect on each rendered appearance. We therefore formulate sparse adaptive acquisition as a rendering-aware optimization problem. Our method combines a set encoder for sparse coordinate–value observations, a pretrained hypernetwork-based/PCA-based BRDF reconstructor, and a differentiable renderer. During sampler training, the reconstructor remains fixed, and gradients from a rendered-image loss optimize the measurement locations. This separates acquisition design from prior fitting and encourages the sampler to choose directions that are informative under the learned material distribution. To make the comparison controlled, we evaluate the uniform baseline, meta-learning method, HyperBRDF method, and our learned sampler under matched sample numbers, train/test split, rendering scene, object mask, image mapping, and metrics. Our central claim: rendering-aware sampling improves extremely sparse BRDF acquisition when final rendered appearance is the target. BRDF-space and combined losses are reported only as ablations, together with joint refinement and image-only latent fitting for unseen materials.
Open-vocabulary 6D object pose estimation empowers robots to manipulate arbitrary unseen objects guided solely by natural language. However, a critical limitation of existing approaches is their reliance on unconstrained global matching strategies. In open-world scenarios, trying to match anchor features against the entire query image space introduces excessive ambiguity, as target features are easily confused with background distractors. To resolve this, we propose Fine-grained Correspondence Pose Estimation (FiCoP), a framework that transitions from noise-prone global matching to spatially-constrained patch-level correspondence. To systematically eliminate background interference, FiCoP first employs an object-centric disentanglement step to isolate the target from macro-level environmental noise. Building upon this localized region, our core methodological innovations are twofold. Firstly, a Cross-Perspective Global Perception (CPGP) module is proposed to fuse dual-view features, establishing structural consensus through explicit context reasoning and text-guided semantic injection. Secondly, we design a Patch Correlation Predictor (PCP) that leverages a patch-to-patch correlation matrix as a structural prior. This generates a precise block-wise association map, acting as a spatial filter to enforce fine-grained, noise-resilient matching. Experiments on the REAL275 and Toyota-Light datasets demonstrate that FiCoP improves Average Recall by 8.0% and 6.1%, respectively, compared to the state-of-the-art method, highlighting its capability to deliver robust and generalized perception for robotic agents operating in complex, unconstrained open-world environments. The source code will be made publicly available at https://github.com/zjjqinyu/FiCoP.
arXiv:2606.16337v1 Announce Type: new Abstract: Predictive modeling for clinical tabular data is central to clinical decision support and therefore requires not only strong predictive performance but also transparent decision logic. Although deep learning and tree-based ensemble methods can achieve high accuracy, their black-box nature remains a major obstacle to clinical deployment. This challenge is further compounded by common characteristics of medical data, including limited sample sizes, severe class imbalance, and feature evolution arising from changes in diagnostic criteria and clinical documentation. To address these issues, we propose Medical Heuristic Learning (MHL), an instantiation of the learning-beyond-gradients paradigm for clinical tabular prediction. Instead of relying on neural network weight updates, MHL uses a large language model (LLM)-driven workflow that integrates statistical probes, medical knowledge probes, rule synthesis, and code-level iterative refinement to optimize a deterministic and executable decision system. The resulting model is expressed not as opaque parameters, but as versioned pure-Python decision rules that are explicitly interpretable, fully auditable, and clinically grounded. MHL also supports continual learning by starting from previously validated rules and iteratively revising them using updated feature information under data drift or feature evolution. Comprehensive experiments on medical datasets show that MHL achieves performance comparable to state-of-the-art methods while maintaining strong behavior in small-sample and highly imbalanced settings. The results further indicate that this explicit rule update mechanism can help alleviate catastrophic forgetting under feature evolution. Overall, these findings suggest that non-gradient-based heuristic systems offer a transparent and adaptable alternative for high-stakes clinical decision support.
arXiv:2606.17589v1 Announce Type: new Abstract: Diagonal unitaries are a fundamental but resource-intensive class of quantum operations, arising as the phase separators of QAOA and the time-evolution blocks of Hamiltonian simulation. Under all-to-all connectivity their optimal depth is established, but on nearest-neighbor hardware general-purpose compilers fall back on heuristic search, which yields no analyzable cost bound and becomes intractable at the very sizes where depth is the bottleneck. We address synthesis and compilation jointly. On the synthesis side, we develop a Gray-Path Framework (GPF) that realizes any $n$-qubit diagonal unitary in asymptotically optimal $R_z$ and CNOT depth $O(2^n/n)$ without ancillas. Our main result is that compiling GPF onto a two-dimensional nearest-neighbor grid preserves this optimality: routing adds depth $\Theta(2^n/n)$ and gate count $\Theta(2^n)$. Because GPF fixes its entire interaction structure in advance, routing reduces to scheduling a known sequence, with no heuristic search. We give the construction both with and without ancillas: the ancilla-free, cost-optimized layout is a two-row grid, and a $2k$-row layout introduces a space–time tradeoff that cuts depth by $1/k$ while remaining asymptotically optimal for the enlarged register; both are deterministic and analyzed in closed form. The same complexity is also attained on a linear nearest-neighbor chain, so the preservation is topology-independent, holding on any architecture that contains such a chain. All routing bounds are closed-form, giving the concrete resource estimates that heuristic compilers cannot provide at scale.
Artificial Intelligence (AI) is increasingly used to automate a variety of real-world computer vision (CV) applications, such as autonomous vehicle control, facial recognition, and security cameras. Recent research has shown that acoustic vibration can induce real physical motion in cameras, interfering with their internal stabilization mechanisms. Because the motion falls outside the conditions the stabilization system was designed to handle, the system introduces artifacts into the frame, causing AI-based CV models to misclassify, miss targets, or hallucinate objects. Previous work used ultrasonic frequencies (>20 kHz) to perform short-range attacks, which limits them to short distances due to the attenuation exhibited by high frequencies. In this work, we investigate acoustic attacks using lower frequencies in the audible range (
Reliable autonomous driving requires vectorized HD maps that are geometrically accurate, semantically rich, and scalable to long-horizon driving. However, existing public HD map datasets are limited in scale, provide sparse semantic attributes, and lack modalities such as aerial imagery that could enable new research directions. We present HRDX, a large-scale dataset for vector HD-map construction, spanning about 40 hours (1,400 km) of minimally overlapping drives, which is several times larger than prior public HD map datasets. Data is captured using six synchronized surround cameras, a 128-beam LiDAR, and centimeter-level RTK GNSS/IMU, and is further complemented by precisely aligned aerial orthoimagery. Annotations cover 10 vector map classes, complemented with over 20 semantic and topological attributes. To evaluate this richer ontology, we introduce the Composite Score (CS) to jointly assess geometric fidelity and attribute correctness. Benchmark experiments show that HRDX's scale improves online vector-map construction, and that aligned aerial imagery provides a useful structural prior: using aerial imagery at training and/or inference improves geometric map quality, while aerial-augmented teachers can transfer part of this benefit to camera-only students without increasing inference-time sensor requirements. HRDX is intended to support reproducible research on large-scale HD-map learning, multimodal BEV fusion, and training-time privileged information. HRDX dataset and benchmarks are available at https://github.com/honda-research-institute/HRDX
arXiv:2511.22486v3 Announce Type: replace-cross Abstract: The requirement for large-scale global simulations of plasma is an ongoing challenge in both space and laboratory plasma physics. Any simulation based on a fluid model inherently requires a closure relation for the high order plasma moments. This review compiles and analyses the recent surge of machine learning approaches developing improved plasma closure models capable of capturing kinetic phenomena within plasma fluid models. We survey two methodological families: neural-network surrogates (from multilayer perceptrons to Fourier neural operators, the latter recently reproducing both linear and non-linear Landau damping online within a fluid solver) and equation-discovery methods such as sparse regression; and organise the studies by whether they are tested offline against reference data or online within a time-evolving solver. We outline the challenges associated with machine-learning closures, including off-diagonal pressure-tensor accuracy, generalisation beyond the training distribution, and stable integration into large-scale simulations, and the directions future research might take to address them.
Radiology report evaluation is essential for advancing automated report generation. Natural language generation metrics have limited clinical relevance. Clinical efficacy (CE) metrics evaluate important medical findings, but focus mainly on presence and cover only a limited set of entities. Due to heavy reliance on manual annotations, it is difficult for CE metrics to extend clinical entities or attributes. In clinical practice, radiology reports serve as a medium for information transfer. Clinicians use them to perform downstream diagnostic tasks without directly inspecting images. Based on this insight, we propose ReportQA, a clinical-related and flexible radiology report evaluation framework, supporting detailed quantitative analysis of radiology report generation systems. We first collect datasets covering multiple imaging modalities and anatomical regions. We then construct knowledge trees of clinical entities and attributes with radiologist guidance, and use large language models (LLMs) to extract structured information from raw reports. Next, we generate QA pairs from predefined templates and apply quality control through self-filtering and report-based filtering. During evaluation, the report is treated as context, and an LLM acts as a judge model to answer the QA pairs. Based on the resulting QA accuracy, we introduce QAScore metric. Compared with existing metrics, QAScore shows better alignment with radiologist judgments. Experiments on multiple state-of-the-art vision-language models reveal that current report-based inference paradigms struggle to learn fine-grained clinical representations and exhibit strong negative prior biases. In contrast, question-driven inference provides a more effective alternative. For reproducibility and extensibility, we release the knowledge trees, structured reports, and QA pairs, along with the pipeline code for QA construction and evaluation.
arXiv:2606.17767v1 Announce Type: cross Abstract: Personal health data from wearables are typically presented through dashboards of charts and summary statistics, requiring users to actively interpret patterns and implications. We explore an alternative interaction paradigm: engaging with personal health data through an embodied conversational agent that facilitates objective data reflection in dialogue with the user. We present a system that combines lightweight preprocessing of wearable data with a Unity-based embodied character. Internally, the system follows a dual-agent design in which an Observer agent extracts descriptive statistics and temporal trends, and a Presenter agent communicates these findings through "spoken statistics," intentionally refraining from clinical advice to isolate the impact of the interaction modality. We evaluate this approach through a simulated-self user study (N=5) using a within-subject design. Participants adopted health personas and goals derived from the LifeSnaps dataset to compare traditional dashboard exploration with embodied conversational reflection. Our evaluation focuses on perceived understanding, the specificity of generated actions, and the cognitive shift from passive viewing to active sensemaking. The paper contributes a functional prototype, a design pattern for objective health data narrative generation, and early empirical insights into how embodiment affects the interpretation of personal health metrics.
Low-light novel view synthesis is challenging because dark multi-view images contain noise, weak structural detail, and compressed dynamic range. Recent 3D Gaussian Splatting (3DGS) methods address these challenges by generating pseudo ground-truth (pseudo-GT) images as supervision targets when paired normal-light references are unavailable. Existing pseudo-GT methods apply a uniform linear gain to all pixels, which clips bright regions while providing insufficient enhancement in dark regions, limiting reconstruction quality. We observe that nonlinear tone mappings, long established in 2D low-light enhancement, have not been explored for pseudo-GT generation in 3D reconstruction. Accordingly, we propose a scene-adaptive nonlinear tone-curve framework that replaces linear pseudo-GT with nonlinear alternatives. The framework introduces percentile-based normalisation for scene-agnostic curve application, a scene-adaptive offset for automatic black-level adjustment, and two complementary curves: Adaptive SoftExp (ASE), a bounded exponential curve, and Adaptive Poly3 (AP3), a data-driven cubic polynomial. The module changes only the pseudo-GT computation and leaves the 3DGS backbone unchanged. Experiments on three benchmarks covering 21 scenes show that both curves consistently outperform the linear baseline with PSNR improvements up to +4.34 dB on LOM and +3.25 dB on RealX3D. Both curves achieve similar performance despite their different mathematical forms, suggesting the improvement is curve-agnostic. Code is available at https://github.com/lvmingzhe/adaptiveToneCurve
arXiv:2606.11304v1 Announce Type: cross Abstract: We introduce SPADE (SPlit And Delay Embeddings), an autoregressive transformer for sequences whose tokens carry multiple features. Rather than embedding these features jointly, SPADE embeds them independently. Delaying each feature stream relative to the previous one allows intra-token correlations to be learned by the standard self-attention mechanism. Applied to point-cloud calorimeter shower generation in the highly granular ILD detector, SPADE is competitive with the state of the art AllShowers model on photon showers, and substantially outperforms its VQ-VAE-based predecessor OmniJet-$\alpha_C$. The mechanism is applicable to any generative task with multi-feature tokens, enabling LLM-style pretraining workflows for higher-dimensional data.