Publisher Correction: Lung and liver editing by lipid nanoparticle delivery of a stable CRISPR–Cas9 ribonucleoprotein
该条目无摘要(多为勘误、社论或新闻类内容,出版方未提供摘要)
Academic Intelligence · Curated Daily
AcademicHub 汇聚顶级期刊与预印本平台的实时文献。定制您的专属科研雷达,利用大语言模型自动生成交叉领域文献分析简报。
该条目无摘要(多为勘误、社论或新闻类内容,出版方未提供摘要)
Friction slows down moving objects at both macroscopic and microscopic scales1. At the electronic level, quantum friction describes direct transfer of momentum between a liquid and the electrons of a solid2. Owing to its microscopic nature, this phenomenon remains experimentally challenging to capture3. Here we show that near-infrared fluorescent single-walled carbon nanotubes (SWCNTs) exhibit light-induced quantum friction in water. It is measured by observing an excitation-power-dependent linear decrease of around 50% in the diffusion constants of functionalized SWCNTs in aqueous solution. This effect disappears when excitons are localized, as in the case of SWCNTs with quantum defects. We further show that the chemical manipulation of exciton concentration by molecules that increase or decrease SWCNT fluorescence also modulates the diffusion constant by up to a factor of 2. Optical pump terahertz (THz) probe spectroscopy shows an instantaneous response (around 30 cm−1) that we assign to direct exciton–water coupling in the range of water Debye modes. It is followed by an increasing (>100 ps) response in the range of intermolecular translational modes of the hydrogen bond network of water (>100 cm−1), resembling heating. Classical molecular dynamics simulations further support a mechanism in which the fluctuating dipole moments of excitons create frictional forces. These findings establish light-induced quantum friction between excitons in SWCNTs and water and show that electronic excitations can be used to control nanoscale motion and fluid properties. Near-infrared fluorescent carbon nanotubes exhibit light-induced quantum friction in water, in which exciton interactions slow nanoscale motion and enable optical control of diffusion and fluid dynamics.
The relationship between obesity and specific autoimmune diseases haas been well-established, specifically due to obesity's role in promoting pro-inflammatory states. Although not much literature has been documented regarding obesity association with AIHA. As such, this study aims to assess any correlations in patients with elevated body mass index (BMI) and autoimmune hemolytic anemia (AIHA). Here we present a retrospective cross-sectional study conducted over a four-year period, across four medical centers during which a new electronic medical record was implemented. The study included 25 patients who had a previously documented history of AIHA from another facility, DAT positive with indicators of hemolysis, or DAT positive with monomer specific antisera. The patients BMI was recorded at the time of presentation to the hospital. However, for patients with a prior history of AIHA or those transferred from another facility, the BMI that was closest to the time period of when the patient was diagnosed with AIHA was used as an adjunct. Our results show that there is an association of patients with elevated BMI (>25) and AIHA; however, various other confounding variables should be taken into consideration, and further research should be done to establish a causal relationship.
Geometric problem solving, as a typical multimodal reasoning problem, has attracted much attention and made great progress recently, however most of works focus on plane geometry while usually fail in solid geometry due to 3D spatial diagrams and complex reasoning. To bridge this gap, we introduce Hilbert-Geo, the first unified formal language framework for solid geometry, including an extensive predicate library and a dedicated theorem bank. Based on this framework, we propose a Parse2Reason method containing two steps of first parsing then reasoning. In the parsing step, we utilize conditional description language (CDL), a formalized language composed of predicates specifically designed to construct geometric conditions, to represent both problem description (natural text) and solid diagrams (visual image). In the reasoning step, we leverage those formal CDL and the theorem bank to perform relational inference and algebraic computation, generating strictly correct, verifiable, and human-readable reasoning processes. Notably, our proposed Hilbert-Geo is also applicable to plane geometry. To advance geometric reasoning, we curate two expert-annotated dataset SolidFGeo2k and PlaneFGeo3k, which are furnished with geometric formal language annotations, solutions and answers. Extensive experiments show that our proposed method achieves the state-of-the-art (SOTA) performance 77.3% in SolidFGeo2k and 84.1% in MathVerse-Solid (one small subset in MathVerse dedicated to solid geometry), substantially outperforming leading MLLMs, such as Gemini-2.5-pro (54.2% on SolidFGeo2k) and GPT-5 (62.9% on MathVerse-Solid). In addition, our method achieves the SOTA accuracy 80.2% in PlaneFGeo3k, demonstrating the generality of the Hilbert-Geo in geometric reasoning. Our code and datasets are released at https://github.com/PremiLab-Math/Hilbert-Geo.
arXiv:2606.15686v1 Announce Type: new Abstract: Large language models often appear strong on symbolic and algorithmic tasks, yet this apparent strength can hide brittle behaviour when problems become longer, harder, or slightly out of distribution. A major limitation of current reasoning benchmarks is that many primarily test whether a model can produce a valid answer, while paying less attention to whether the solution is minimal, robust, and stable under controlled difficulty scaling. We introduce RecurrReason, a difficulty-controlled benchmark of four recurrent logic puzzles (Tower of Hanoi, River Crossing, Block World, and Checkers Jumping) with BFS-optimal trajectories and a single interpretable difficulty parameter $N \in \{1,\dots,10\}$, totalling 10{,}817 unique puzzles and 285{,}933 moves. We benchmark two Transformer families, an encoder-decoder model (T5-style) and a decoder-only model (GPT-2-style), under consistent data splits and evaluation criteria, training on $N{=}1$ to $7$ and evaluating on both held-out in-distribution instances and harder out-of-distribution instances at $N{=}8$ to $10$. Fine-tuned pre-trained T5 achieves 97.27\% validation and 81.00\% OOD accuracy on Block World; all models score 0.00\% on River Crossing under all conditions. Failure mode analysis reveals that architecture is a stronger determinant of success than scale. Pre-training transfers only to puzzles with locally structured transition functions. Our code and dataset will be open-sourced upon acceptance.
arXiv:2606.20146v1 Announce Type: new Abstract: Large language models (LLMs) are increasingly applied to computer-aided design (CAD) to generate design artifacts from textual instructions. In engineering practice, this requires more than creating new geometry, models must also understand existing scenes, edit them correctly, and preserve semantics and relations. However, many CAD benchmarks focus on creating new models rather than editing existing ones, and mostly evaluate geometric correctness. We introduce BIM-Edit, a benchmark for evaluating LLMs on natural-language editing of Building Information Models (BIM) represented in the Industry Foundation Classes (IFC) format. BIM provides a challenging testbed because building models encode geometry together with semantic and relational structure. BIM-Edit contains 324 editing tasks spanning 11 realistic building models and 36 synthetic scenes. Tasks are expressed using three instruction categories - direct, spatial, and topological - covering both explicit and scene-grounded edits. We evaluate outputs along three dimensions: geometric accuracy, semantic validity, and topological consistency. Across evaluated LLMs, the best-performing model achieves only 49.5% average score across the three metrics, and no model fully solves more than 3.4% of tasks. These results demonstrate a substantial gap between current LLM capabilities and the requirements of structured engineering design workflows.
arXiv:2606.15052v1 Announce Type: cross Abstract: Traditional design of analog circuits heavily relies on manual interventions across topology, sizing, and layout, with prior automation addressing stages in isolation. In this work, we propose PANDA, an LLM-enhanced framework that bridges high-level design intent to final layout by actively managing cross-stage dependencies through guided topology synthesis, substructure-aware sizing, and constraint-driven layout generation. This shifts automation from algorithm-centric execution to intent-centric co-design, reducing turnaround time from days or weeks to hours while improving design performance.
Modeling long-range dependencies remains a central challenge in natural language processing. Transformer architectures achieve strong performance via self-attention but scale quadratically ($O(N^2)$) with sequence length, while State Space Models (SSMs) scale linearly ($O(N)$) but suffer from a selective recall bottleneck, struggling to retrieve precise information from compressed states. This creates a fundamental tradeoff between efficiency and perplexity. To tackle these challenges, we propose the Parallel Hybrid Architecture (PHA), which runs Gated State Spaces (GSS), Grouped Query Attention (GQA), and Feed-Forward Networks (FFNs) as independent parallel branches fused by a learnable mixing mechanism. Instead of forcing SSMs to approximate attention or serializing the two paradigms, PHA allows each branch to specialize: GSS captures global context, while attention performs selective retrieval, with FFN providing complementary processing. On WikiText-103, PHA achieves 16.51 PPL at 125M parameters, outperforming Hedgehog (16.70) and H3-125M (23.70). Scaling to 180M parameters yields 16.42 PPL, which gives comparable results with the pure attention baseline while delivering 24\% higher throughput and up to 40\% lower memory usage at long contexts. On OpenWebText, our 125M model achieves 19.72 PPL, outperforming standard Transformers (20.60) and GSS hybrid baselines (19.80). These results demonstrate that separating sequence modeling paradigms into parallel specialists enables Transformer-level perplexity with substantially improved efficiency for long-context language modeling.
Semantic 3D occupancy provides a voxelized world state for autonomous driving and robot decision making, but object and rare-class errors can affect free-space interpretation, collision checking, and temporal state propagation. We show that a common VLM strategy, aligning 3D voxel or object features with crop-caption embeddings, improves text-space similarity without reliably improving closed-set occupancy mIoU. Motivated by this mismatch, we propose VISA, a training-time semantic auditing approach for existing occupancy world models. VISA queries an offline VLM on a representative crop of each physical object instance, obtains a structured audit with class hypotheses, plausible confusions, reliability, attributes, and evidence, and propagates it along the object track. The audit is grounded to matched 3D object voxels and distilled into semantic logits through reliability-weighted taxonomy, attribute-factor, and scene-level audit graph losses, while inference remains unchanged and requires no VLM. On nuScenes, averaged across three runs, VISA improves OccWorld from 19.06 to 20.05 mIoU and GaussianWorld from 21.36 to 21.91 mIoU; on GaussianWorld, object mIoU improves from 18.18 to 19.16 and rare-class mIoU from 15.60 to 16.79. These results suggest that VLMs are better suited to closed-set occupancy as reliability-aware semantic auditors than as generic caption-embedding targets.
arXiv:2606.12769v1 Announce Type: new Abstract: We introduce a general phase-space representation that includes global quantum symmetries in the basis expansion. This method, called matrix phase-space, projects the basis onto a reduced Hilbert space, which can greatly reduce sampling errors of many-body quantum simulations and unifies several previous phase-space methods. The purpose of this paper is to provide detailed proofs of basic theorems and operator identities. We also treat several different types of symmetries. To illustrate the benefits of matrix phase-space methods, we give a detailed derivation of a recent application to the topical problem of verifying the outputs of Gaussian boson sampling (GBS) quantum computers with photon number resolving detectors. This has exponential complexity, and using parity symmetry reduces sampling errors by very large factors relative to earlier methods.
arXiv:2606.15887v1 Announce Type: cross Abstract: Large language model (LLM) systems are increasingly proposed to assist peer review, yet most evaluations judge the prose of machine-generated review text, not the validity of the numeric score a system assigns. We validate AIPR, which reads a submitted manuscript and emits five 0-100 quality dimensions and a weighted overall score, against the public decision outcomes of a major machine learning venue. AIPR grades by prompting alone, with no fine-tuning on reviews or decisions. Across 300 ICLR submissions with public decision tiers and reviewer ratings, graded under a frozen pipeline with hypotheses pre-registered before any score met any outcome, the overall score separates rejected from accepted submissions (AUROC 0.82, 95% CI 0.78-0.87), rises monotonically across tiers, and tracks the mean reviewer rating. The signal is strongest where we claim it: the lowest-scoring fifth is rejected far above the base rate, with oral papers absent. The validity comes mostly from the model: a one-paragraph prompt on the same model discriminates almost as well as the full pipeline (the small gap favours the pipeline but does not meet the pre-declared criterion, p = 0.09). What the engineering adds is reliability and a grounded review: AIPR's score barely moves across repeated runs (0.7 vs. 2.8 points within-paper SD) where the bare prompt swings, and the same pass returns a rubric-structured, evidence-grounded review rather than a bare number, with the human keeping the decision.
Existing approaches to 3D scene understanding in Vision-Language Models (VLMs) either rely on complex, model-specific geometry encoders or large training budgets in pursuit of spatial reasoning. Instead, OneCanvas aggregates patch features from all views onto a single equirectangular panoramic canvas. Namely, each patch is unprojected to a 3D world coordinate using its depth and camera pose, then placed on the canvas at the continuous longitude and latitude of that point as seen from the canvas origin, with no rasterization or aggregation across overlapping views. A 3D position embedding of the patch's metric coordinates is added to its feature, restoring the depth lost when collapsing the world position to an angular canvas coordinate. Patches from all frames thus share one spatial coordinate system with no fusion or major architectural modifications of the backbone. The pretrained VLM consumes this representation as if it were an ordinary image. Because the canvas can be centered on any pose of interest, the same representation directly supports situated reasoning from a specific viewpoint, a common requirement in robotics and embodied AI. Thanks to this representation, we can also introduce a spatial pretraining curriculum: by procedurally placing patch features of objects, drawn from real images, at chosen 3D world positions on an otherwise empty canvas, we generate on-the-fly supervision spanning a broad range of spatial reasoning tasks, with answer distributions controlled to reduce spatial reasoning shortcuts. OneCanvas achieves state-of-the-art accuracy on SQA3D and VSI-Bench, and generalizes to out-of-distribution data on SPBench, using an order of magnitude less training compute than the strongest competing methods.
Refined detection methods, more detailed tumor characterization, and adequate distinction between different pediatric tumor subtypes are necessary to improve diagnosis and treatment, enable precision medicine, and advance patient prognosis. However, the application of computational approaches to pediatric brain tumors remains limited, largely due to the lack of accessible datasets. To address part of this gap, we provide whole slide images (WSIs) of hematoxylin and eosin (H&E)-stained tissue sections from all pediatric central nervous system (CNS) samples collected in Sweden between 2013 and 2023. These data represent a population-based national cohort encompassing all six pediatric oncology centers in Sweden and are available through the Swedish Childhood Tumor Biobank (BTB). The dataset includes 1,446 WSIs of sufficient image quality with confirmed CNS tumor diagnoses, derived from 537 unique subjects (562 cases). In addition, diagnosticrelevant clinical information is included. Corresponding whole-genome sequencing (WGS), wholetranscriptome sequencing (WTS), and methylation array data are available for most tumor samples through separate resources. This H&E dataset has been specifically curated to support artificial intelligence-based analyses, while also serving broader applications in medical research and education. When combined with matched molecular data, it provides a valuable resource for advancing multimodal and precision diagnostic approaches in the pediatric population. Refined detection methods, more detailed tumor mapping and adequate distinction between different subtypes of pediatric tumors are necessary to improve treatment, enable precision medicine and improve patient prognosis. Application of computational algorithms for pediatric brain tumors is very limited mainly due to the unavailability of pediatric histology brain tumor data sets. To enable the development of AI models comprehensive datasets covering a wide range of pediatric brain tumors are needed.
arXiv:2606.17093v1 Announce Type: new Abstract: Learning-based single-shot fringe projection profilometry (FPP) has been studied mostly at close range. The long-range regime (standoff beyond 1 m) remains largely unaddressed: inverse-square intensity falloff lowers fringe signal-to-noise ratio and degrades physical ground truth, the single-shot problem is ill-posed because fringe-order information is absent from one image, and these architectures have not been studied mechanistically. We present a diagnose-repair-verify study using mechanistic interpretability (MI) and conformal uncertainty quantification (UQ) as convergent diagnostics: they agree on one physical failure locus, driving and verifying an architectural repair. On a photorealistic synthetic benchmark (15,600 fringe images, 50 objects at 1.5-2.1 m), a best UNet baseline reaches 14.54 mm object mean absolute error (MAE). Three probes (linear probing, Grad-CAM, flat-plane out-of-distribution test) converge: the baseline solves the task via object-boundary shape priors rather than fringe-phase decoding. We repair this with PhiCalNet, which outputs wrapped phase rather than depth and applies a fixed differentiable calibration layer mapping phase to depth, removing the shape-prior solution from the hypothesis space architecturally rather than by a loss penalty. A physics-informed loss that enforces the same physics as a soft penalty on a depth-regressing network yields no measurable gain, isolating the architecture as the operative factor. PhiCalNet reduces object MAE 3.3x to 4.46 mm; the residual is carried by 0.103% of pixels at the +/-pi wrap discontinuity. Pixel-wise conformal UQ confirms the diagnosis: rejecting the top 5% of object pixels by snapshot disagreement cuts PhiCalNet RMSE by 64% (20.6->7.4 mm) versus 3.5% for the baseline. MI and UQ converge on the same failure locus.
Industrial products such as valves and circuit breakers are defined by dense technical specifications that govern procurement, compatibility, and safety across supply chains. These specifications are scattered across multiple heterogeneous product images, including specification tables, nameplates, and technical drawings, yet whether Multimodal Large Language Models (MLLMs) can reliably recover them remains underexplored. To fill this gap, we introduce IndustryBench-MIPU, the first large-scale benchmark for multi-image industrial product understanding, built around structured attribute extraction – recovering property-value pairs from product images. This task jointly probes text recognition on specification tables and nameplates, visual reasoning over technical drawings, domain knowledge to decode industrial terminology, and cross-image evidence integration to assemble scattered specifications. Concretely, the benchmark comprises 4,559 products across 27,652 images with 103,703 annotations spanning 18 industrial categories, constructed through multi-model consensus and three-tier quality assurance. Evaluating nine MLLMs under both single-image and product-level multi-image settings reveals a stark completeness gap: models achieve high precision (86–94%) but the best recovers only 49.9% of product-level attributes; moving from single-image to multi-image extraction costs 15–34 percentage points of recall. Multi-image completeness, not single-image accuracy, is the core bottleneck. Dataset and code are publicly available.
Robust semantic segmentation of road scenes under adverse illumination, lighting, and shadow conditions remain a core challenge for autonomous driving applications. RGB-Thermal fusion is a standard approach, yet existing methods apply static fusion strategies uniformly across all conditions, allowing modality-specific noise to propagate throughout the network. Hence, we propose CLARITY that dynamically adapts its fusion strategy to the detected scene condition. Guided by vision-language model (VLM) priors, the network learns to modulate each modality's contribution based on the illumination state while leveraging object embeddings for segmentation, rather than applying a fixed fusion policy. We further introduce two mechanisms - one which preserves valid dark-object semantics that prior noise-suppression methods incorrectly discard, and a hierarchical decoder that enforces structural consistency across scales to sharpen boundaries on thin objects. Experiments on the MFNet dataset demonstrate that CLARITY establishes a new state-of-the-art (SOTA), achieving 62.3% mIoU and 77.5% mAcc.
The Hong Kong Genome Project established a genome sequencing database that provides improved diagnoses for patients and more efficient, population-tailored carrier status screening. Actionable pharmacogenomic variants were identified in almost all participants, informing drug prescriptions. This work establishes a genomic resource and a transferable model for equitable precision medicine in underrepresented populations worldwide.
Background: Cancer survivors face elevated risks of mortality from cardiovascular disease (CVD). The potential importance of physical activity (PA) and other behaviours across the 24-hour day (e.g. sedentary behaviour (SB) and sleep) for CVD-mortality risk is not well understood in this at-risk population. Objectives: To assess the importance of 24-hour movement behaviour, using a compositional approach, for mitigating CVD-mortality amongst cancer survivors. Methods: Participants with a prior cancer diagnosis were drawn from the UK Biobank accelerometry sub-study (n=6,158). Accelerometer-derived movement (moderate-to-vigorous PA (MVPA), vigorous PA (VPA), moderate PA (MPA), light PA (LPA), SB, sleep) was examined in relation to CVD-mortality, identified from health record linkage data (using Fine-Gray Cox proportional-hazards models adjusted for demographic, health, lifestyle covariates). Results: Median follow-up was 8.0 years (Q1-Q3: 7.4-8.5), with n=500 (8.2%) deaths (CVD-deaths: n=118). Greater MVPA, in place of any other behaviour, was inversely associated with CVD-mortality with e.g. 10% lower hazard if MVPA theoretically replaced 7 minutes (mins)/day SB (Hazard ratio (HR): 0.91, (95% Confidence Interval: 0.86-0.95)), 9 mins/day LPA (HR: 0.90, 0.83-0.97), or 11 mins/day sleep (HR: 0.90, 0.83-0.97). The VPA component of MVPA proved critical, requiring only ~1-2 additional mins/day for equivalent hazard reduction. Sleep duration, was also inversely associated with CVD-mortality. A 10% lower hazard required replacing 29 mins/day of SB with sleep (HR: 0.90, 0.84-0.96); no other behavioural replacement amongst SB, sleep or LPA could provide an equivalent risk reduction. Conclusions: Among cancer survivors, the most potent reduction in CVD-mortality followed theoretically reallocating time to higher intensity movement.
arXiv:2601.14792v2 Announce Type: replace Abstract: Despite their practical success, it remains unclear why Mixture of Experts (MoE) models can outperform dense networks beyond sheer parameter scaling. We study an iso-parameter regime where inputs exhibit latent modular structure but are corrupted by feature noise, a proxy for noisy internal activations. We show that sparse expert activation acts as a noise filter: compared to a dense estimator, MoEs achieve lower generalization error under feature noise, improved robustness to perturbations, and faster convergence speed. Empirical results on synthetic data and real-world language tasks corroborate the theoretical insights, demonstrating consistent robustness and efficiency gains from sparse modular computation.
Objective: To evaluate the road safety impact arising from Scotlands 2014 reduction in the legal blood alcohol concentration (BAC) limit for drivers, and to assess whether the effect of the reform varied across different spatial contexts. Design: A quasi-experimental statistical longitudinal study using a Synthetic Difference-in-Differences (SDID) approach. Setting: Small-area panel data for Great Britain, with areas (Middle-layer Super Output Areas, MSOAs, in England and Wales and Intermediate Zones, IZs, in Scotland) classed into control and treatment groups according to whether they were exposed to Scotlands BAC reform. The control and treatment groups comprise 7088 spatial units in England and Wales and 852 spatial units in Scotland, respectively, observed over the period 2008-2019. Participants: The study primarily analyses police-reported road traffic collision data from the UK Department for Transports STATS19 system. Data were analysed at the MSOA/IZ level. This is a secondary dataset, and we therefore did not involve patients or the public in formulating the research question, determining outcome measures, or designing and conducting the study. Main Outcome Measures: The main outcome measures were log-transformed rates of total road traffic crashes, and (weekend) night-time crashes (22:00-04:00) per 100,000 population. The latter is used as a proxy measure for drunk driving. Results: Our results indicate that the reduction in the legal BAC limit led to statistically significant declines in road traffic crash rates. Aggregate estimates suggest reductions of 12.0% (95% confidence interval (CI): [-13.7%, -10.3%]) in total crashes, 15.6% (95% CI: [-20.7%, -10.2%]) in night-time crashes, and 12.4% (95% CI: [-16.7%, -7.9%]) in weekend night-time crashes. We also find substantial heterogeneity in treatment effects across spatial contexts. Effects were strongest in rural and less densely populated areas, where reductions exceeded 16% (95% CI: [-18.7%, -13.9%]) for total crashes and reached up to 29.6% (95% CI: [-35.8%, -22.8%]) for night-time and 21.4% (95% CI: [-28.3%, -13.9%]) for weekend night-time crashes. Moderate but statistically significant effects were also observed in dense urban areas, whereas effects in suburban and transitional areas were smaller and not statistically significant. Conclusions: Our analysis suggests that lowering the legal BAC limit in Scotland led to meaningful reductions in road traffic crashes, particularly during higher-risk periods and in rural areas. The findings further suggest that the effectiveness of BAC regulation may vary across local contexts, highlighting the importance of accounting for spatial heterogeneity when evaluating road safety policies.
arXiv:2606.20557v1 Announce Type: new Abstract: A model is multicalibrated on a collection of group weights $G$ if it is calibrated – i.e. unbiased even conditional on its prediction – not just overall, but also after reweighting contexts by each $g \in G$. It is a useful property for many downstream applications and is a basic desideratum of trustworthy machine learning. Before this work, all predictors known to attain the minimax-optimal $\widetilde O(\varepsilon^{-3})$ sample complexity rate for $\varepsilon$-multicalibration were randomized, while deterministic predictors were known only with substantially worse sample complexity. Whether randomization is necessary for optimal sample complexity in multicalibration was explicitly asked by [CLNR26] and implicitly in several prior works. We resolve this open problem by giving a minimax-optimal multicalibration algorithm that outputs a deterministic predictor. We then generalize the algorithm to produce optimal deterministic predictors that satisfy outcome indistinguishability (OI) with respect to finite or finitely covered collections of tests. As an application, this also gives deterministic omnipredictors and panpredictors with optimal sample complexity, resolving open problems posed by [OKK25] and [BHHLZ25].
Objective: This systematic review and meta-analysis examined 1) the effects of stress management interventions on changes in stress eating for women, and 2) the longevity of these effects, by summarizing and assessing evidence from controlled and non-equivalent pretest-posttest intervention studies. Method: Five databases (PsycINFO, PubMed, Medline, Web of Science, CINAHL), existing sources, and grey literature were searched (February - June 2025). Studies that assessed stress eating or emotional eating, included a stress management intervention, and comprised at least 70% women were included. The primary outcome was reduction in stress eating. Data were pooled in meta-analyses using multi-level random-effects models and subset by follow-up period. Risk of bias was assessed via funnel plots and sensitivity analyses. Results: Sixty studies with 119 effect size estimates were included in the primary analysis. Pooled estimates indicated that stress management interventions significantly reduced stress eating (Hedges g = -0.4174, p < 0.001), with pre-post designs having larger effects than controlled trials. Subgroup analyses of follow-up periods found small effects in the short-term (before 3 months; Hedges g = -0.4202, p < 0.0001) and moderate effects for mid-term (3-6 months; Hedges g = -0.5886, p < 0.0001). Effects beyond 6 months were small and nonsignificant (Hedges g = -0.4370, p = 0.0660). Conclusion and Relevance: Stress management interventions appear to be effective for reducing stress eating for women, suggesting the potential to incorporate stress management in interventions targeting obesity. Effects may be only sustained 6 months post-intervention, suggesting the need for strategies to bolster long-term effectiveness.
Recent breakthroughs in Diffusion Transformers (DiTs) have revolutionized the field of visual synthesis due to their superior scalability. To facilitate DiTs' capability of capturing meaningful internal representations, recent works such as REPA incorporate external pretrained encoders for representation alignment. However, the underlying mechanisms governing representation learning within DiTs are not well understood. To this end, we first systematically investigate the representation dynamics of DiTs. Through analyzing the evolution and influence of internal representations under various settings, we reveal that representation diversity across blocks is a crucial factor for effective learning. Based on this key insight, we propose DiverseDiT, a novel framework that explicitly promotes representation diversity. DiverseDiT incorporates long residual connections to diversify input representations across blocks and a representation diversity loss to encourage blocks to learn distinct features. Extensive experiments on ImageNet 256x256 and 512x512 demonstrate that our DiverseDiT yields consistent performance gains and convergence acceleration when applied to different backbones with various sizes, even when tested on the challenging one-step generation setting. Furthermore, we show that DiverseDiT is complementary to existing representation learning techniques, leading to further performance gains. Our work provides valuable insights into the representation learning dynamics of DiTs and offers a practical approach for enhancing their performance.
Closed-loop driving simulators typically populate their environments with non-ego traffic agents that behave largely the same way, produced either by rule-based traffic managers or by learned models trained toward a single behavioral mode. Recent work introduces style variation through post-hoc labels on observational data or LLM-inferred reward weights, but these signals act as proxies for what a style should reward rather than demonstrations of humans explicitly asked to drive in that style. We introduce PersonaDrive, a pipeline that conditions a vision-language-action (VLA) driving agent on retrieved demonstrations from a style-instructed human driving dataset, in which participants drive CARLA leaderboard routes under aggressive, neutral, and conservative instructions on a driver-in-the-loop rig. The pipeline has three stages: (i) offline triplet mining over per-style human driving data using a combined image-text similarity score; (ii) training a lightweight retrieval head that fuses frozen visual features with a small control encoder over per-style databases; and (iii) fine-tuning a single VLA backbone to treat retrieved context points as in-context behavioral demonstrations during waypoint prediction. At inference, the same backbone is conditioned on any style by swapping which per-style database the retrieval head queries, so selecting a style requires no per-style retraining while enabling human-style, style-diverse non-ego agents for closed-loop simulation. On Bench2Drive, PersonaDrive (no style) improves the driving score by 4.6% over SimLingo and 2.5% over HiP-AD, and under style conditioning attains the highest driving score in every style within a roughly 2% band (its weakest style surpassing the strongest baseline, DMW, by 5.4%), while average speed and acceleration rise by 18% and 25% from the conservative to the aggressive instruction.
arXiv:2606.17383v1 Announce Type: cross Abstract: Agentic artificial intelligence systems introduce a new class of model risk. Unlike traditional predictive models, autonomous agents continuously acquire information, form beliefs regarding latent states of the environment, generate forecasts, select actions, and adapt their behavior over time. Existing validation methodologies focus primarily on predictive accuracy and therefore provide limited insight into the quality of the underlying decision process. This paper proposes a model validation framework for agentic AI based on Partially Observable Markov Decision Processes (POMDPs). The framework decomposes autonomous decision making into information, beliefs, forecasts, actions, and utility, allowing each component to be validated independently. Large language models (LLMs) are formalized as approximate Bayesian filtering operators, and a model-risk taxonomy is developed encompassing state-space, filtering, forecast, policy, utility-specification, and parameter risks. The model risk validation methodology is demonstrated through a portfolio-management case study in which an agent infers latent market regimes from market and macroeconomic information, generates belief-conditioned forecasts, and constructs portfolios using a Black–Litterman framework. Empirical validation combines performance analysis, belief calibration diagnostics, coverage tests, ablation studies, and parameter-sensitivity analysis. The results indicate that latent-state inference contributes independently to decision quality and that the principal conclusions remain robust across a broad range of parameter values. The principal contribution of the paper is a practical framework for extending established model risk management concepts to autonomous AI systems and providing a rigorous foundation for their validation, governance, and monitoring.