Academic Intelligence · Curated Daily

探索全球前沿学术脉络

AcademicHub 汇聚顶级期刊与预印本平台的实时文献。定制您的专属科研雷达,利用大语言模型自动生成交叉领域文献分析简报。

01.
arXiv (CS.LG) 2026-06-17

Memory-Efficient Meta-Reinforcement Learning for Adaptive Safety-Critical Control in Adversarial Spacecraft Proximity Operations

arXiv:2606.17414v1 Announce Type: new Abstract: Autonomous spacecraft rendezvous and proximity operations (RPO) require controllers that guarantee safety under thrust constraints while minimizing fuel expenditure. Input-constrained control barrier functions (ICCBFs) provide a control method for nonlinear systems with actuation constraints that construct a forward-invariant safe set. Previous work has shown that learning class-$\mathcal{K}$ functions defining the ICCBF recursion via meta reinforcement learning (meta-RL) yields a robust, non-greedy approach to safety-critical control in RPO. This paper extends that framework further by investigating the performance of three recurrent network architectures (Long Short Term Memory (LSTM), Gated Recurrent Unit (GRU), Selective State Space Model (Mamba)) and two training algorithms (Proximal Policy Optimization (PPO) and Soft Actor Critic (SAC)) to identify the best setup for tuning ICCBF class-K functions via meta-RL. In addition to cooperative test cases, performance is evaluated in the presence of adversarial behavior where the target spacecraft behaves in a way that worsens the safety of the chaser spacecraft. Results indicate that state space models such as Mamba when used with PPO achieve superior task completion, safety, and fuel-savings compared to other architectures, across all cooperative and uncooperative scenarios tested.

02.
arXiv (CS.CV) 2026-06-16

Local-GS: Accelerating 3D Gaussian Splatting via Tile-Local Warp Coherence

3D Gaussian Splatting (3DGS) has significantly advanced real-time novel view synthesis by representing scenes as dense collections of anisotropic 3D Gaussian primitives. However, the irregular spatial distribution of Gaussians often leads to poor GPU utilization, as warp divergence and redundant computation degrade rendering performance. To address this, we present Local-GS, a warp-coherent rendering paradigm that, organizes Gaussian primitives with respect to SIMT (Single Instruction, Multiple Threads) execution boundaries rather than scene geometry. Specifically, we propose three warp-coherent stages: a hoisting stage that precomputes shared parameters at tile level, a culling stage that discards warps with no contribution, and a blending stage that replaces per-pixel branching with a uniform instruction stream. Across extensive benchmarks on multiple datasets, Local-GS improves efficiency without compromising quality. As a plug-and-play optimization, it provides additional performance gains to all tested baselines, culminating in a $7.76\times$ speedup on Deep Blending scenes.

03.
arXiv (CS.LG) 2026-06-16

Adaptive Kernel Density Estimation with Pre-training

arXiv:2605.13092v2 Announce Type: replace-cross Abstract: Density estimation in high-dimensional settings is an important and challenging statistical problem.Traditional methods based on kernel smoothing are inefficient in high dimensions due to the difficulties in specifying appropriate location-adaptive kernels. In this work, we introduce pre-training, a key idea behind many cutting-edge AI technologies, to the context of non-parametric density estimation. By establishing a pre-trained neural network that can recommend an appropriate location-adaptive kernel for each sample point, efficient density estimation with adaptive kernels is achieved in high dimensions. A wide range of numerical experiments show that this strategy is highly effective for improving density-estimation accuracy, when the target distribution is close to the distribution family for pre-training. When the target distribution is substantially different from the pre-training distribution family, the benefit from the proposed pre-training strategy may be diluted, but can be reactivated by an additional fine-tuning procedure.

04.
arXiv (CS.CV) 2026-06-16

Faithful Action-unit Causal Reasoning for Counterfactually Faithful Emotion Explanations

Multimodal models can name the action units (AUs) behind a facial emotion, but their AU->emotion rationales are typically plausible rather than faithful: nothing forces the AUs a model invokes to be the AUs that actually drive its prediction. We cast AU->emotion reasoning as a counterfactual-consistency problem between the rationale, the label, and a structural AU->emotion causal graph G, and propose FACR, which grounds the reasoner in an independently induced, polarity-aware G and trains a counterfactual-faithfulness objective: a do-intervention on an AU that G marks causal for a class must move the prediction, while one it marks irrelevant must leave it unchanged. Faithfulness is thereby both trainable and measurable through a matching interventional metric, which we evaluate against a known causal structure, the PSPI pain-AU composition, as no existing affective-reasoning benchmark allows. We are explicit that this metric tests fidelity to the supplied structure rather than its rediscovery: it asks whether the trained reasoner invokes the AUs the structure marks causal, on held-out subjects and a second dataset. Under subject-independent evaluation on UNBC-PAIN, the objective raises the agreement between the invoked AUs and the PSPI composition from a no-objective baseline of 0.08 to 0.57, at a small detection cost; an unfaithfulness control attributes the gain to the objective. On a cross-dataset emotion transfer, the objective likewise raises fidelity to G on a seven-class task (0.50 to 0.84). Finally, we attach a language verbalizer and extend the audit to the generated text: biasing each action unit's emission by its latent activation makes the rationale faithful by construction, so that ablating an AU removes it from the explanation, a property that transfers to a second language-model backbone, whereas a freely generated rationale is unfaithful.

05.
Nature (Science) 2026-06-17

Structure of the pre-initiation complex explains CMGE biogenesis

When cells enter S phase, bidirectional DNA replication is initiated through the kinase-regulated recruitment of three activators (Cdc45, GINS and Pol ε) to a duplex-DNA-loaded double hexamer of minichromosome maintenance (MCM) ATPases. Together, these proteins form two CMGE helicases that establish divergent replication forks as they become separated1. Here, to gain an understanding of CMGE biogenesis, we reconstituted the pre-initiation complex with purified yeast proteins. The cryo-electron-microscopy structure shows a set of firing factors caught in the act of assembling two symmetrical CMGEs. We show how stepwise complex formation reshapes MCM in preparation for DNA opening, and we explain how ATP promotes firing-factor ejection and CMGE maturation. We find that although Sld2 facilitates the recruitment of GINS to MCM, as expected, it also aids the efficient separation of the CMGE dimer, and is essential for the ejection of the lagging strand from MCM. These findings have direct implications for our understanding of the metazoan Sld2 orthologue, RECQL4, and point to a replication-fork establishment mechanism that is conserved across eukaryotes. Cryo-electron microscopy and biochemical reconstitution experiments in yeast provide insight into the assembly of the CMGE complex, a helicase that establishes bidirectional DNA replication in eukaryotic cells, and elucidate the role of the firing factor Sld2.

06.
medRxiv (Medicine) 2026-06-23

Multivariate Echocardiographic Phenotyping of Hypertensive Heart Failure Using Unsupervised Machine Learning: A Pilot Study

Background Heart failure in hypertensive patients is heterogeneous and poorly captured by traditional left ventricular ejection fraction (LVEF) based classification. Multivariate echocardiographic data combined with unsupervised machine learning may provide a more precise phenotypic characterization. This pilot study evaluated the feasibility of unsupervised clustering of routine transthoracic echocardiographic data to identify phenotypic subgroups of hypertensive heart failure. Methods This retrospective pilot study analyzed transthoracic echocardiography reports from hypertensive patients with clinical heart failure. After data cleaning and exclusion of incomplete records, 102 patients with 11 echocardiographic variables were included. Variables describing left ventricular geometry, systolic function, and diastolic performance were standardized and subjected to K-means clustering. Optimal cluster number was determined using the elbow method and silhouette analysis. Cluster characteristics were assessed using descriptive statistics and Kruskal Wallis testing. Concordance with LVEF based heart failure categories was evaluated. Results Three distinct echocardiographic phenotypes were identified. Cluster 0 (n = 50) demonstrated preserved LVEF with concentric remodeling, consistent with heart failure with preserved ejection fraction (HFpEF) phenotype. Cluster 1 (n = 37) showed marked ventricular dilation and reduced systolic function, consistent with heart failure with reduced ejection fraction (HFrEF). Cluster 2 (n = 15) exhibited concentric hypertrophy with intermediate LVEF, consistent with heart failure with mildly reduced ejection fraction (HFmrEF) like phenotype. All echocardiographic variables differed significantly across clusters (p < 0.001). While Cluster 0 showed strong concordance with HFpEF (96%), Clusters 1 and 2 demonstrated substantial overlap across LVEF categories, indicating partial discordance between structural phenotypes and LVEF based classification. Conclusion Application of unsupervised machine learning to routine echocardiographic data identifies distinct heart failure phenotypes in hypertensive patients. These phenotypes demonstrate significant structural heterogeneity beyond LVEF based classification, supporting the utility of data-driven approaches for refined cardiac phenotyping. This pilot study provides a foundation for larger prospective studies.

07.
arXiv (math.PR) 2026-06-11

Exact Fourier dimensions of dyadic Mandelbrot cascades on curves of nonvanishing curvature under minimal integrability

arXiv:2606.11758v1 Announce Type: new Abstract: We prove an exact Fourier-dimension formula for scalar dyadic Mandelbrot cascades pushed forward to fixed C^2 Jordan curves with nonvanishing curvature. Let W be in the minimal Kahane-Peyriere regime, let the scalar dyadic cascade live on T = R/Z, and let gamma map T to R^2 be a fixed C^2 Jordan curve with nonvanishing curvature, parametrized at constant speed. For the push-forward measure mu_gamma, we prove that, almost surely on non-extinction, its Fourier dimension is A_loc(W), the usual local exponent obtained by optimizing over q>1 from the moment expression involving E[W^q]. The upper bound follows from the scalar circle local-dimension theorem, bi-Lipschitz transfer to the fixed curve, and a deterministic curved-support obstruction for Fourier dimension. The lower bound follows from a fixed-curve finite-r annular theorem, which gives summable annular Fourier decay under a single finite moment witness. The main analytic input is a deterministic phase-geometry package for fixed nondegenerate C^2 curves: stationary tubes, derivative bands, and phase-bin coefficient estimates replacing the explicit trigonometric structure available on the unit circle.

08.
arXiv (CS.LG) 2026-06-16

Bridging data-driven priors via the score function for posterior sampling – Comparative review and experimental study

arXiv:2606.14800v1 Announce Type: cross Abstract: This paper reviews how a diverse set of popular data-driven priors commonly used in Bayesian inverse problems can be unified through their respective score functions. By framing these priors under this common perspective, we show that they can benefit from their straightfoward and effective integration into a recently proposed sampling algorithm. The applicability of this common framework is illustrated by considering several data-driven priors, namely regularization-by-denoising, normalizing flow-based priors, score-based generative models, and convex-ridge regularizers. For these four particular priors, the performance of the method is evaluated when conducting image inpainting and single image super-resolution. These results, as well as those obtained when restoring real images acquired in a geological context, demonstrate the efficiency of the method. This unified framework proves versatile enough to handle any posterior distribution defined by a broad class of score function-based priors, beyond the specific cases considered in this paper.

09.
arXiv (CS.CV) 2026-06-16

VigilFormer: Deformable Attention for Video Anomaly Detection with Causal Risk Inference

作者:

Video anomaly detection in surveillance settings must balance detection accuracy against real-time throughput, a tension that existing methods address either through stronger feature extractors or more efficient architectures, but rarely both. We present VigilFormer, a unified framework that combines deformable spatio-temporal attention with causal temporal modeling to detect anomalies in untrimmed surveillance video. The proposed Deformable Spatio-Temporal Encoder (DSTE) attends to a sparse set of informative locations across frames, avoiding the quadratic cost of dense attention while retaining the ability to capture irregular motion patterns. A Causal Anomaly Classifier (CAC) applies dilated causal convolutions over snippet-level features and optimizes a contrastive multiple-instance learning objective that separates anomalous and normal representations without frame-level labels. To meet deployment constraints, an Adaptive Confidence Scheduler (ACS) dynamically skips low-information frames at inference time, reducing redundant computation in static scenes. Evaluated on UCF-Crime, ShanghaiTech, and CUHK Avenue, VigilFormer achieves AUC scores of 87.83%, 97.21%, and 89.74% respectively, at 41.5 FPS on a single GPU, outperforming recent weakly-supervised methods in both accuracy and speed.

10.
arXiv (quant-ph) 2026-06-15

Resurgence of the Thermal Transition between Bounce and Sphaleron

arXiv:2606.13778v1 Announce Type: cross Abstract: We study the thermal transition between the bounce and the sphaleron in quantum mechanics with a metastable vacuum from the viewpoint of Borel resurgence. For two models representing a second-order and a first-order transition, we compute the perturbative expansion of the thermal free energy to high orders and extract the leading Borel singularity data $(A,b,S)$ as functions of temperature. The Borel singularity location $A$ reproduces the on-shell action of the dominant saddle on both sides of the transition, joining smoothly in the second-order case and developing a kink in the first-order case. The characteristic exponent $b$ jumps between $0$ and $1/2$ across the transition, counting the zero modes of the corresponding saddle. The Stokes constant $S$ matches the one-loop determinant around the saddle. The perturbative expansion around the false vacuum thus determines the transition temperature, the order of the transition, and the decay rate including the one-loop prefactor without relying on semiclassical inputs.

11.
arXiv (CS.AI) 2026-06-17

DPRM: A Plug-in Doob h transform-induced Token-Ordering Module for Diffusion Language Models

arXiv:2604.24357v2 Announce Type: replace-cross Abstract: Diffusion language models generate without a fixed left-to-right order, leaving token ordering as a central algorithmic choice. Existing systems mainly use random masking or confidence-driven ordering, which respectively suffer from train–test mismatch and myopic exploration. We introduce DPRM (Doob -transform Process Reward Model), a plug-in token-ordering module that keeps the host architecture, denoising objective and supervision unchanged, and modifies only the ordering policy. DPRM starts from confidence-driven ordering and gradually shifts to process-reward-guided ordering through online estimates. We characterize the exact DPRM policy as a reward-tilted Gibbs reveal law, prove convergence of its stagewise Soft-BoN approximation, show that the online bucketized controller tracks the exact DPRM score at empirical-Bernstein rates, and establish a sample-complexity advantage under tractable optimization assumptions. Across nine hosts covering language reasoning, test-time scaling, protein, single-cell, molecular, DNA, text-to-image generation, and VQA, DPRM order variants improve several language, DNA, and multimodal settings while also identifying boundary cases where confidence-only ordering or task-specific utilities are preferable. Code is available at: https://github.com/DakeBU/DPRM-DLLM

12.
arXiv (CS.CL) 2026-06-18

PEC-Home: Interpretation of Progressively Elliptical Commands in Smart Homes

Recent advancements in Large Language Models (LLMs) have empowered home assistants with natural language interaction capabilities. However, current assistants overlook the progressive omission that occurs in human dialogue as shared context accumulates, leading to more elliptical expressions for efficient communication. Thus, current assistants still struggle to interpret such elliptical expressions accurately, which limits their effectiveness in real-world applications. In practical smart home scenarios, assistants face two major challenges caused by elliptical commands: (1) referential ambiguity caused by different environmental expectations among multiple users; and (2) intention ambiguity resulting from user preferences that evolve over time or change with the environment. To address these challenges, we introduce PEC-Home, the first simulated home dataset specifically designed for interpreting progressively elliptical commands in smart homes. Extensive experiments on various LLMs, including GPT-4o, show that existing home assistants struggle to execute user-intended operations based solely on elliptical commands. Even when equipped with tools for storing and retrieving user dialogue history, execution accuracy remains below that achieved with complete commands.}.

13.
bioRxiv (Bioinfo) 2026-06-16

Physics-Driven Zero-Shot Reconstruction of Isotropic 3D Fluorescence Microscopy under Undersampled Acquisition

Three-dimensional (3D) imaging represents the development of next generation of fluorescence microscopy. However, routine axial down-sampling makes isotropic resolution unrealistic. Here, we propose DeepUI, a physical zero-shot framework designed to achieve isotropic 3D fluorescence images from a low axial sampling rate. DeepUI fully leverages the intrinsic characteristics of 3D images through physics-guided degradation, which incorporates spatial-frequency joint learning to generate a scaled optical transfer function, combined with noise degradation and an up-sampling branch. Typically requiring just 5 minutes for training and 0.5 minutes for high-throughput and fast prediction, we demonstrate the superior performance of DeepUI to get isotropic results, and the exclusivity to axial down-sampling conditions, even in more challenging conditions, including defocused background, noise, and resolution blur.

14.
arXiv (CS.AI) 2026-06-17

LoopCoder-v2: Only Loop Once for Efficient Test-Time Computation Scaling

arXiv:2606.18023v1 Announce Type: cross Abstract: Looped Transformers scale latent computation by repeatedly applying shared blocks, but sequential looping increases latency and KV-cache memory with the loop count. Parallel loop Transformers (PLT) alleviate this cost through cross-loop position offsets (CLP) and shared-KV gated sliding-window attention, making loop count a practical design choice. We therefore study PLT loop-count selection through a gain–cost view: an extra loop may refine representations, but CLP also introduces a positional mismatch at each loop boundary. We instantiate this study by training LoopCoder-v2, a family of 7B PLT coders with different loop counts, from scratch on 18T tokens, followed by matched instruction tuning and evaluation. Empirically, the two-loop variant delivers broad gains over the non-looped baseline across code generation, code reasoning, agentic software engineering, and tool-use benchmarks, improving SWE-bench Verified from 43.0 to 64.4 points and Multi-SWE from 14.0 to 31.0 points. In contrast, variants with three or more loops regress, revealing a strongly non-monotonic loop-count effect. Our diagnostics show that loop 2 provides the main productive refinement, while later loops yield diminishing, oscillatory updates and reduced representational diversity. Because the CLP-induced mismatch remains roughly fixed as refinement gains shrink, the offset cost increasingly dominates. This gain–cost trade-off explains PLT's saturation at two loops and provides diagnostics for loop-count selection.

15.
arXiv (CS.CV) 2026-06-11

Contactless 3D Human Body Measurement Using Depth Cameras for Smart Health Monitoring

Contactless body measurement technologies are becoming increasingly significant for smart health monitoring, digital health applications, and remote patient assessment. Traditional anthropometric measurements typically necessitate physical contact and trained personnel, which may constrain scalability in remote healthcare settings. In this study, we introduce a depth camera-based framework for estimating human body measurements utilizing 3D point cloud data. An Orbbec Astra 2 depth camera was employed to capture RGB images, depth maps, and 3D point clouds of participants. The captured point cloud was processed using Python-based tools, including Open3D, NumPy, and OpenCV, to segment the human body from the background. Key anthropometric measurements, such as height and arm span, were computed. The measurements were obtained through a combination of spatial filtering and landmark selection on the 3D point cloud, followed by the projection of the computed measurements onto the corresponding RGB image using camera intrinsic parameters. In addition to linear measurements, the approximate body volume and visible surface area were estimated using voxel-based occupancy analysis and mesh-based surface reconstruction methods. The experimental results from a single depth capture demonstrated that accurate body measurements and geometric estimates could be obtained from depth camera data without physical contact. This study provides a foundation for future real-time systems that integrate depth sensing with intelligent health monitoring and generative AI models for smart healthcare applications.

16.
arXiv (CS.CL) 2026-06-17

Evidence of Layered Positional and Directional Constraints in the Voynich Manuscript: Implications for Cipher-Like Structure

The Voynich Manuscript (VMS) exhibits a script of uncertain origin whose grapheme sequences have resisted linguistic analysis. We present a systematic analysis of its grapheme sequences, revealing two complementary structural layers: a character-level right-to-left optimization in word-internal sequences and a left-to-right dependency at word boundaries, a directional dissociation not observed in any of our four comparison languages (English, French, Hebrew, Arabic). We further evaluate two classes of structured generator against a four-signature joint criterion: a parametric slot-based generator and a Cardan grille implementing Rugg's (2004) gibberish hypothesis. Across their full tested parameter spaces, neither class reproduces all four signatures simultaneously. While these results do not rule out generator classes we have not tested, they provide the first quantitative benchmarks against which any future generative or cryptanalytic model of the VMS can be evaluated, and they suggest that the VMS exhibits cipher-like structural constraints that are difficult to reproduce from simple positional or frequency-based mechanisms alone.

17.
arXiv (CS.CL) 2026-06-16

OpenClaw-Skill: Collective Skill Tree Search for Agentic Large Language Models

Equipping Large Language Model (LLM) agents with effective skills is crucial for solving complex tasks in real-world systems like OpenClaw. In this work, we aim to develop a framework that automatically constructs such reusable skills to enhance LLMs in tool use, multi-step reasoning, and dynamic environment interaction. To this end, we propose Collective Skill Tree Search (CSTS), a novel tree-search-based skill construction framework that constructs structured, diverse and generalizable tree of skills. The core idea of CSTS is to leverage collective intelligence to jointly search, identify and compose effective skills via two iterative phases: Collective Skill Node Generation (CSN-Gen) and Collective Skill Node Assessment (CSN-Assess). CSN-Gen exploits collective knowledge from multiple models to explore diverse candidate skills for each subtask, enabling comprehensive skill exploration. CSN-Assess employs multiple models as judges to evaluate and select skill nodes with two scoring mechanisms: (1) collective quality scoring that aggregates independent evaluations to produce a robust estimate of skill effectiveness, and (2) collective transferability scoring that explicitly verifies whether a skill generalizes well across different models. With CSTS, we construct a set of comprehensive tree of skills along with skill-augmented training data, enabling models to effectively learn and utilize skills. Besides, we introduce Collective Skill Reinforcement Learning, which actively selects multiple relevant skills from the tree to broaden solution-space exploration, avoid being trapped by a single skill and its resulting homogeneous or suboptimal solutions. As a result, our trained model, OpenClaw-Skill, exhibits outstanding agentic capabilities in long-horizon planning, tool use and generalization over challenging benchmarks.

18.
arXiv (CS.AI) 2026-06-15

When Good Verifiers Go Bad: Self-Improving VLMs Can Regress on New Tasks

作者:

arXiv:2606.14629v1 Announce Type: cross Abstract: Verifier-driven self-DPO is a common recipe for self-improving production visual-language models. In this setup, a frozen verifier scores candidate generations, the top- and bottom-scoring candidates form a preference example, and DPO updates the learner. The deployment-time assumption is monotone: a stronger verifier should yield a stronger student. We show that this assumption can fail because verifier quality is highly task-specific. On a four-rung open-source verifier ladder across MathVista, MMMU, and BLINK, the same verifiers that are above-threshold and improve a Qwen-3-VL-2B student on MathVista become sub-threshold on MMMU, where their task-rubric accuracy drops to 8% to 23%. In this regime, every verifier we tested silently regresses the student, producing drops of 3.4 to 10.9 percentage points below the frozen baseline while the DPO training loss continues to decrease. The regression replicates on a second student, Qwen-2.5-VL-3B. Moreover, within the failure regime, damage is confidence-inverted: the more accurate-but-still-wrong verifier causes larger regression than a near-random verifier, suggesting that progress-gated replay amplifies confidently wrong preference pairs. We give a compact mechanistic explanation via a variance theorem for progress-gated replay and its direction-mismatch failure mode. The deployment message is operational rather than purely diagnostic: before running any verifier-driven loop, teams should measure target-task rubric accuracy, rank verifiers by target-task rubric quality rather than parameter count, and treat diminishing returns in above-threshold regimes as a verifier-side compute budget cap.

19.
arXiv (CS.AI) 2026-06-12

Evoflux: Inference-Time Evolution of Executable Tool Workflows for Compact Agents

arXiv:2606.12674v1 Announce Type: new Abstract: Compact language models (LMs) reduce cost, latency, and deployment risk for tool agents. Yet MCP-style tool use requires more than isolated function calling: an agent must discover tools from live catalogs, satisfy schemas, preserve dependencies across intermediate outputs, and ground final responses in executed evidence. Small planners often generate plausible workflow graphs that fail under tool resolution, parameter validation, dependency tracking, or execution. We argue that this failure mode is poorly handled by small-corpus distillation. A few hundred teacher traces can teach workflow format, but rarely cover the recovery behavior needed to repair failed plans over changing tool catalogs. We introduce Evoflux, an inference-time evolutionary search method that treats compact tool use as the repair of executable tool workflows. It evolves typed workflow graphs through structured edits, execution feedback, adaptive intensity, meta-guided redesign, and diversity pruning. On held-out MCP-Bench tasks spanning live MCP servers and 250 tools, Evoflux raises execution feasibility from roughly 3% to 17-24% across small planners. In contrast, SFT and SFT+DPO on the same search-mined data match, underperform, or collapse below zero-shot performance; ReAct reaches higher peaks, but with higher variance and token cost. These results show that execution-grounded search is more reliable under scarce teacher-trace budgets.

20.
arXiv (CS.CV) 2026-06-16

Seeing Roads Through Words: A Language-Guided Framework for RGB-T Driving Scene Segmentation

Robust semantic segmentation of road scenes under adverse illumination, lighting, and shadow conditions remain a core challenge for autonomous driving applications. RGB-Thermal fusion is a standard approach, yet existing methods apply static fusion strategies uniformly across all conditions, allowing modality-specific noise to propagate throughout the network. Hence, we propose CLARITY that dynamically adapts its fusion strategy to the detected scene condition. Guided by vision-language model (VLM) priors, the network learns to modulate each modality's contribution based on the illumination state while leveraging object embeddings for segmentation, rather than applying a fixed fusion policy. We further introduce two mechanisms - one which preserves valid dark-object semantics that prior noise-suppression methods incorrectly discard, and a hierarchical decoder that enforces structural consistency across scales to sharpen boundaries on thin objects. Experiments on the MFNet dataset demonstrate that CLARITY establishes a new state-of-the-art (SOTA), achieving 62.3% mIoU and 77.5% mAcc.

21.
arXiv (CS.AI) 2026-06-17

SkillJect: Effectively Automating Skill-Based Prompt Injection for Skill-Enabled Agents

arXiv:2602.14211v3 Announce Type: replace-cross Abstract: Agent skills extend LLM agents with task-specific instructions, executable scripts, and auxiliary resources, improving reusability but creating a new supply-chain attack surface. A malicious or compromised skill can be repeatedly loaded as trusted guidance and steer downstream tool use. Existing skill-based prompt-injection attacks are often manual and brittle, because explicit malicious instructions are rejected or ignored when they are not aligned with the original workflow. We propose SkillJect, the first automated framework for generating poisoned skills against skill-enabled agent systems. SkillJect uses two coordinated channels. In the artifact channel, it hides the payload inside an auxiliary helper script. In the instruction channel, it rewrites SKILL.md with a front-loaded inducement strategy, placing injected content at the beginning and framing the helper script as a mandatory prerequisite or initialization step. The rewritten instruction explicitly references the helper-script path and provides an executable example command, making the helper appear to be a legitimate setup step before normal skill operations. SkillJect further adopts a closed-loop multi-agent process to improve attack effectiveness. An Attack Agent generates poisoned skills, a Victim Agent executes downstream tasks with the poisoned skill, and an Evaluate Agent inspects execution traces to determine whether the hidden payload was executed. The Attack Agent then uses this feedback to diagnose failure causes and rewrite SKILL.md, while keeping the payload fixed. Experiments across skill-enabled platforms, backend LLMs, and attack categories show that SkillJect substantially outperforms naive direct injection and prior manual skill-injection attacks, highlighting poisoned skills as a persistent threat in reusable skill ecosystems.

22.
arXiv (CS.CL) 2026-06-18

LLM Parameters for Math Across Languages: Shared or Separate?

Large language models (LLMs) exhibit substantial cross-lingual variation in mathematical reasoning performance, but it remains unclear whether these differences reflect language-specific parameters or a shared mechanism that manifests differently by language. We present a cross-lingual mechanistic analysis of mathematical reasoning in LLMs, enabling us to localize and compare model parameters that support mathematical reasoning across languages. We find that the extracted math-associated parameters exhibit partial cross-lingual overlap, with the strongest overlap concentrated in intermediate model layers. We further observe that English consistently produces the largest set of math-relevant parameters, whereas lower-resource languages reveal smaller sets of relevant parameters. These results suggest that math-related behavior in multilingual LLMs is neither fully language-invariant nor fully language-specific, but instead exhibits partial cross-lingual parameter overlap with systematic language-dependent differences.

23.
arXiv (CS.LG) 2026-06-16

Near-Optimal Stochastic Linear Bandits with Delay

arXiv:2606.16656v1 Announce Type: new Abstract: We study stochastic linear bandits with delayed feedback under several delay models and establish near-optimal regret guarantees. Our results identify when delayed linear bandits exhibit the same qualitative behavior as multi-armed bandits (MAB), and when the linear structure creates fundamentally new challenges. Specifically, (1) for loss-independent delays, where the delay does not depend on the realized loss (but potentially depends on the arm), we show that delays incur only an additive regret penalty. Under stochastic delays, this penalty scales with the expected delay, while under adversarial delays, it scales with the maximum number of outstanding observations. Notably, both delay penalties are dimension-free, improving upon the state-of-the-art results; (2) for loss-dependent delays, we show that linear bandits are substantially harder than MAB: unlike in MAB, we prove matching (up to log factors) upper and lower bounds in linear bandits, whose delay penalty depends on the square root of the dimension. (3) for the delay-as-payoff model, a special case of loss-dependent delay, we show that the optimal MAB guarantee, which depends only on the delay of the optimal arm, is also unattainable in linear bandits. Together, these results provide a sharp characterization of how delayed feedback interacts with linear generalization.

24.
arXiv (quant-ph) 2026-06-15

Experimental violation of a Bell-like inequality for causal order

arXiv:2506.20516v2 Announce Type: replace Abstract: Quantum mechanics is compatible with scenarios where physical processes happen in an indefinite order. In theory, this feature could be detected through violations of inequalities on the observed correlations, analogous to Bell inequalities. However, experimental demonstrations of such violations have been missing until recently due to the complexity of the required setup. Here we report an experimental violation of a Bell-like inequality involving the correlations of four parties, one of which is spacelike separated from the others. Our demonstration employs 3 km fiber spools to simulate spacelike separation, and achieves high-speed operations in photonic time-bin encoding, nanosecond synchronization, and accurate temperature stabilization. These experimental advances enable a violation by 5.7 standard deviations and open a path towards a certification of indefinite order in conditions that guarantee spacelike separation with existing state-of-the-art devices. However, the certification is not device-independent, as it relies on knowledge about the setup to exclude bidirectional signaling–a loophole inherent to implementations in classical acyclic spacetimes, which may be resolved in future quantum-spacetime tests.

25.
arXiv (CS.LG) 2026-06-16

Distilling latent electrostatics from foundation machine learning interatomic potentials

arXiv:2606.15001v1 Announce Type: cross Abstract: Foundation machine learning interatomic potentials (MLIPs) have enabled atomistic simulations across broad regions of chemical and materials space, but many remain computationally expensive and lack explicit electrostatics, limiting their use for systems governed by long-range interactions and electrical response. Previously, we introduced Latent Ewald Summation (LES), which learns latent atomic charges and long-range electrostatics from density functional theory (DFT) energy and force labels alone. Here, we use LES to extract electrostatics that are latent in foundation models: energies and forces predicted by a teacher model are used to train a lightweight LES-augmented student MLIP, with optional fine-tuning on additional DFT data. The resulting models reduce computational cost while providing access to Born effective charge tensors, and infrared spectra. We benchmark student models distilled from a broad set of foundation MLIPs, including UMA, MACE, Orb, eSEN, GemNet-OC, PET, and EquiformerV2-based models, against experimental infrared spectra for liquid water, concentrated hydrochloric acid, and the anatase TiO2(101)-water interface. Across these systems, electrostatic response can be extracted from most foundation MLIPs. The benchmark further shows that the underlying DFT level and dataset used to train the teacher model play a larger role than architecture in determining electrostatic and spectroscopic accuracy. For the TiO2-water interface, fine-tuning with a modest amount of higher-level DFT data improves structural and infrared predictions. LES-based distillation therefore provides a practical route for converting foundation MLIPs into efficient, electrically responsive models, while also testing the physical fidelity encoded in foundation models.