Academic Intelligence · Curated Daily

探索全球前沿学术脉络

AcademicHub 汇聚顶级期刊与预印本平台的实时文献。定制您的专属科研雷达,利用大语言模型自动生成交叉领域文献分析简报。

01.
arXiv (quant-ph) 2026-06-17

A polynomial-time approximation scheme for minimum-weight decoding of topological codes

arXiv:2606.18145v1 Announce Type: new Abstract: Two-dimensional topological translationally invariant (2D TTI) stabilizer codes lie at the heart of fault-tolerant quantum computation, but using them requires solving the decoding problem. Minimum-weight decoding of these codes was recently shown to be NP-hard, even in basic settings, such as the color code with Pauli $Z$ errors and the toric code with Pauli $X$, $Y$ and $Z$ errors. Here, we prove that minimum-weight decoding of 2D TTI codes nonetheless admits a polynomial-time approximation scheme (PTAS), i.e., for any constant $\varepsilon>0$, a recovery operator of weight within a multiplicative factor of $1+\varepsilon$ of the minimum can be found in polynomial time. Our approach builds on Arora's PTAS for Euclidean problems, such as the traveling salesman problem, and applies when decoding can be cast in terms of point-like excitations connected by string-like errors. It therefore extends beyond two dimensions, covering certain higher-dimensional topological codes and quantum memories, including the toric code with phenomenological or circuit-level noise.

02.
arXiv (CS.LG) 2026-06-12

Design Criteria for SGD Preconditioners: Local Conditioning, Noise Floors, and Basin Stability

arXiv:2511.19716v2 Announce Type: replace-cross Abstract: Stochastic Gradient Descent (SGD) often slows in the late stage of training due to anisotropic curvature and gradient noise. We analyze preconditioned SGD in the geometry induced by a symmetric positive definite matrix $\mathbf{M}$, deriving bounds in which both the convergence rate and the stochastic noise floor are governed by $\mathbf{M}$-dependent quantities: the rate through an effective condition number in the $\mathbf{M}$-metric, and the floor through the product of that condition number and the preconditioned noise level. For nonconvex objectives, we establish a preconditioner-dependent basin-stability guarantee: when smoothness and basin size are measured in the $\mathbf{M}$-norm, the probability that the iterates remain in a well-behaved local region admits an explicit lower bound. This perspective is particularly relevant in Scientific Machine Learning (SciML), where achieving small training loss under stochastic updates is closely tied to physical fidelity, numerical stability, and constraint satisfaction. The framework applies to both diagonal/adaptive and curvature-aware preconditioners and yields a simple design principle: choose $\mathbf{M}$ to improve local conditioning while attenuating noise. Experiments on a quadratic diagnostic and three SciML benchmarks validate the predicted rate-floor behavior.

03.
arXiv (CS.CL) 2026-06-19

Benchmarking Local LLMs for Natural-Language-to-SQL Querying in Biopharmaceutical Manufacturing: An Empirical Benchmark on Consumer-Grade Hardware

Biopharmaceutical manufacturing organizations operate under regulatory frameworks such as FDA guidance, EU Good Manufacturing Practice (GMP), and the EU AI Act, which can restrict the use of cloud-based artificial intelligence systems. Locally deployed large language models (LLMs) offer a privacy-preserving alternative, but their suitability for pharmaceutical manufacturing tasks remains underexplored. This study evaluates four open-source LLMs (Qwen 2.5 Coder 7B, Llama 3.1 8B, Mistral 7B, and Meditron 7B) deployed locally via Ollama for natural-language-to-SQL generation over a pharmaceutical manufacturing database. A FastAPI-based evaluation platform, PharmaBatchDB AI, was developed using a synthetic Microsoft SQL Server database containing approximately 63,000 records across Batch, Manufacturing Execution System (MES), and Clean-In-Place (CIP) modules. Models were benchmarked on 60 domain-specific natural-language questions using metrics including SQL extraction rate, SQL compliance, factual consistency, ROUGE-L, hallucination rate, throughput, and latency. Qwen 2.5 Coder 7B, Llama 3.1 8B, and Mistral 7B generated SQL for all evaluation tasks, while Meditron 7B failed on nearly all tasks due to context-window limitations and poor SQL generation capability. Llama 3.1 8B achieved the highest SQL compliance, whereas Qwen 2.5 Coder 7B achieved the strongest overall text similarity and factual consistency. Performance differences between the two leading models were not statistically significant. The results show that code-tuned general-purpose LLMs outperform a domain-specific biomedical model on structured query generation for pharmaceutical manufacturing data. Although fully local, GxP-aligned NLQ systems are feasible on consumer hardware, current performance levels still require human oversight and downstream validation for regulated use.

04.
arXiv (CS.AI) 2026-06-16

Minimalist Genetic Programming

arXiv:2606.10237v2 Announce Type: replace Abstract: Genetic programming (GP) is based on two important insights. First, that any learning task can fundamentally be posed as a program induction problem, where the goal is to construct a symbolic hierarchical model that is expressed as a syntax tree. Second, to pose this task as a search problem, and use evolution to locate the desired model. Since it was proposed, GP has produced notable results in a wide range of tasks and problem domains. This work presents an alternative view by modifying the second core insight of GP, posing the problem as a syntactic derivation task instead. In particular, this paper presents Minimalist Genetic Programming (MGP), an algorithm that like GP is biologically inspired, but instead of evolution it takes inspiration from the Minimalist Program to human language, in which syntax is understood as an optimal solution to the problem of linking two other mental systems. In minimalism, the core computational process is a binary set formation operator called $MERGE$, than can be used to incrementally construct complex syntactic structures using a simple Markovian process. MGP is able to discover the core building blocks of the symbolic expressions, and to incrementally combined them using $MERGE$. The proposed system is benchmarked on symbolic regression tasks that are known to be difficult to solve with standard GP systems because of the propensity for bloat. Results show that when a proper lexicon of atomic syntactic objects are chosen, MGP is able to consistently produce the exact ground truth model on a set of symbolic regression tasks where standard GP struggles to do the same. The insights provided by minimalism are shown to be relevant to the problem of program induction, and should be explored further based on the potential exhibited by MGP in this work.

05.
arXiv (CS.CV) 2026-06-19

Geometry-Aware Superpixel Graph Transformer with Metadata for Skin Lesion Classification

Automated skin cancer classification from dermoscopic images remains challenging due to heterogeneous lesion structure, strong intra-class variability, and subtle visual differences between benign and malignant cases. Existing CNN/ViT pipelines typically rely on global or patch-level features and often combine patient metadata via late fusion, which limits spatially grounded multimodal reasoning. We present a novel region-based graph learning framework that explicitly models lesions as graphs of spatially coherent superpixel regions represented as frozen CNN features. To capture fine-grained lesion arrangements, we encode inter-regional geometry as edge attributes and introduce a dedicated metadata context node connected to all regions, providing structured integration of demographic/clinical variables within the same relational space. Node representations are updated using our edge-aware graph transformer followed by attention-driven propagation, and a final graph-level embedding for benign-malignant classification. Experiments on four public benchmarks demonstrate that explicit region-level relational modeling and graph-native multimodal fusion yield consistent gains over the state-of-the-art. Consequently, we establish a new graph-centric perspective in which CNN features are modeled as relational nodes and improved through contextual integration, yielding more expressive and robust classifications.

06.
arXiv (CS.AI) 2026-06-19

FlowFake: Liquid Networks for Audio Deepfake Detection

arXiv:2606.19579v1 Announce Type: cross Abstract: Audio deepfakes generated by neural text-to-speech and voice-cloning systems threaten speaker verification and public discourse at scale. The core challenge is cross-dataset generalization: detectors trained on one synthesis pipeline collapse on unseen forgeries. We argue that this failure is primarily because of structural synthetic speech artifacts which are multi-timescale trajectory anomalies. Though every existing detector aggregates a fixed-window frame statistics, this misaligns the architecture with the signal. We propose FlowFake, a Liquid Time-Constant (LTC) architecture whose hidden state evolves via a learned ODE, with per-neuron adaptive time constants simultaneously resolving spectral (10ms) and prosodic (2s) cues. At only 34K parameters FlowFake achieves formal BIBO stability and O(dt^4) integration error. On a four-dataset cross domain benchmark (ASVspoof2019-LA, FakeOrReal, InTheWild, MLAAD), FlowFake reaches 75.29% on ASVspoof2019 trained only on FakeOrReal and 79.97% trained only on MLAAD. It outperforms RawGAT-ST and Whisper-DF on every evaluated pair and matching SSL Wav2vec2 (300x larger) at 0.01% of its parameter count. The source code is available on : https://github.com/GhostRider2023/FlowFake

07.
arXiv (CS.CV) 2026-06-19

CUPID: Reconstructing UV Texture Maps for Interpretable Person-of-Interest Deepfake Detection

Deepfakes targeting a high-profile individual, known as Person-of-Interest (POI), are a threat to modern democracies and societies. Current POI deepfake detection methods still struggle to combine robustness to post-processing, efficiency and interpretability, focal aspects of modern deepfake detectors. In this paper we propose CUPID, a POI video deepfake detector that combines UV texture maps, a facial appearance representation derived from 3D face reconstructions, with the representation learning capabilities of the Masked Autoencoder (MAE). Our method does not require any deepfake videos in its training phase. Moreover, it does not even require to include a specific POI in the training set: the combination of UV texture maps extracted from real video frames and the MAE context-guided reconstruction yields a latent space that captures rich and discriminative facial features also for identities unseen during training. In the testing phase, the embeddings extracted from a query video depicting the POI can be matched against pristine reference videos to assess the video authenticity. Furthermore, operating in the UV space naturally provides an additional layer of interpretability. Specifically, we can extract decoded residual maps that highlight which facial regions of a test video deviate most from the identity representation of the corresponding POI. Experiments on four deepfake datasets show that CUPID outperforms current state of the art on most datasets and achieves the best overall robustness against strong downscaling and compression, providing also substantially faster inference. Our experimental code will be released at https://github.com/polimi-ispl/CUPID.

08.
arXiv (CS.LG) 2026-06-19

Adaptive Distance-Aware Trunk Deep Operator Learning for Long-Span Roadway Bridges

arXiv:2606.20015v1 Announce Type: new Abstract: Long-span roadway bridges exhibit highly localized structural responses under vehicular loading, making repeated FE analysis computationally expensive for applications such as influence surface generation and structural digital twins. Existing SciML approaches struggle to accurately capture these localized responses. To address this challenge, this study proposes an adaptive-trunk DeepONet for localized structural response prediction in large-scale bridge systems. The framework dynamically constructs a load-dependent learning domain using a KNN strategy, allowing the network to focus on structural influence zones. The trunk network is further enhanced using distance-aware features that encode the geometric relationship between the load and structural nodes. A physics-based full-field reconstruction is incorporated through a stiffness-informed Schur complement formulation, enabling predictions at adaptive nodes to be extended to the entire structural domain. To enable scalable training, response data are generated using a reduced-order equivalent shell model that preserves the dominant global behavior while significantly reducing computational cost. The proposed framework is validated on both a benchmark bridge model and the real-world Mussafah Bridge. Results show that the method achieves FEM-level accuracy with relative errors below 5%, while reducing the total response evaluation time (including full-field reconstruction) by approximately 60x; excluding the post-processing reconstruction step, the AD-DeepONet inference is up to four orders of magnitude faster than FEM. In addition, the framework enables rapid generation of full-field responses, influence lines, and influence surfaces under arbitrary vehicular loading configurations, demonstrating strong potential for large-scale bridge analysis and digital twin applications.

09.
arXiv (CS.CL) 2026-06-15

Knowledge Graph Enhanced Memory-Augmented Retrieval for Long Context Modeling

Long-context language modeling requires not only extending context windows but maintaining coherent understanding of entity states and relationships across thousands of tokens – a challenge that semantic similarity alone cannot address. KGERMAR addresses this by constructing dynamic, context-specific knowledge graphs from input text during inference, enabling domain-adaptive retrieval that leverages both semantic similarity and explicit entity relationships. The framework performs real-time entity and relation extraction to build contextual knowledge graphs, then integrates graph-structural embeddings with textual semantics through a multi-component memory architecture. Three memory banks – contextual, semantic, and structural – are maintained with retrieval signals fused via learned weights to capture both surface-level semantics and deeper relational patterns. Evaluated on SlimPajama (84.7K training examples), WikiText-103 (4,358 examples), PG-19 (100 examples), and Proof-pile (46.3K examples), KGERMAR achieves up to 8.5\% lower perplexity and 2–2.5x better memory efficiency than memory-augmented baselines across context lengths from 1K to 32K tokens, with superior in-context learning performance across five NLU tasks. The dynamic knowledge graph construction approach advances memory-augmented language modeling by enabling domain-specific knowledge representation that adapts to input contexts rather than relying on fixed knowledge bases.

10.
arXiv (CS.CL) 2026-06-18

MORTAR: Multi-turn Metamorphic Testing for LLM-based Dialogue Systems

With the widespread application of LLM-based dialogue systems in daily life, quality assurance has become more important than ever. Recent research has successfully introduced methods to identify unexpected behaviour in single-turn testing scenarios. However, multi-turn interaction is the common real-world usage of dialogue systems, yet testing methods for such interactions remain underexplored. This is largely due to the oracle problem in multi-turn testing, which continues to pose a significant challenge for dialogue system developers and researchers. In this paper, we propose MORTAR, a metamorphic multi-turn dialogue testing approach, which mitigates the test oracle problem in testing LLM-based dialogue systems. MORTAR formalises the multi-turn testing for dialogue systems, and automates the generation of question-answer dialogue test cases with multiple dialogue-level perturbations and metamorphic relations (MRs). The automated MR matching mechanism allows MORTAR more flexibility and efficiency in metamorphic testing. The proposed approach is fully automated without reliance on LLM judges. In testing six popular LLM-based dialogue systems, MORTAR reaches significantly better effectiveness with over 150\% more bugs revealed per test case when compared to the single-turn metamorphic testing baseline. Regarding the quality of bugs, MORTAR reveals higher-quality bugs in terms of diversity, precision and uniqueness. MORTAR is expected to inspire more multi-turn testing approaches, and assist developers in evaluating the dialogue system performance more comprehensively with constrained test resources and budget.

11.
arXiv (CS.LG) 2026-06-17

Randomized Midpoint Method for Log-Concave Sampling under Constraints

arXiv:2405.15379v3 Announce Type: replace-cross Abstract: In this paper, we study the problem of sampling from log-concave distributions supported on convex and compact sets, with a particular focus on the randomized midpoint discretization of both overdamped and kinetic Langevin diffusions in constrained domains. We revisit the proximal framework for handling constraints through projection operators and develop a more general formulation that encompasses Euclidean, Bregman, and Gauge projections. The resulting smooth approximation allows a unified and tractable analysis of Langevin algorithms and their variants under constraints. Within this framework, we establish convergence guarantees in Wasserstein-$q$ $(q\geqslant 1)$ distances between the smooth surrogate and the target distribution. We further derive complementary lower bounds, showing that the results are near-optimal in order. Building upon this tight approximation analysis, we obtain new convergence guarantees for the randomized midpoint Langevin algorithms and refined bounds for both vanilla and kinetic Langevin Monte Carlo methods under constraints, thereby advancing the theoretical understanding of constrained diffusion-based sampling.

12.
arXiv (quant-ph) 2026-06-16

Generative modelling powered by room-temperature polariton condensates

arXiv:2606.15344v1 Announce Type: cross Abstract: Generative modelling requires efficient stochastic nonlinear transformations and physical platforms that can naturally realise them. We experimentally demonstrate that nonlinear optical systems operating in the strong light-matter coupling regime can serve as physical transformation layers for conditional generative modelling. Specifically, we develop a workflow in which room-temperature exciton-polariton condensates formed in organic dye microcavities act as a physical stochastic transform within a generative adversarial network and enable conditional digit-to-image translation. By using the nonlinear many-body dynamics and intrinsic stochasticity of polariton condensates, the workflow outperforms baseline approaches based on digitally injected perturbations. We find that polariton-enabled sampling via generative adversarial network (Polariton GAN) yields improved inception score, digit preservation accuracy and structural similarity compared with both digital sampling and laser-based systems. We further show that spatially correlated output variations can naturally regularise adversarial training and enhance output diversity. Our results establish polariton condensation as a new computational resource for generative modelling, opening a pathway towards physics-enhanced machine learning systems.

13.
medRxiv (Medicine) 2026-06-18

Cost-effectiveness of a virtual fracture clinic versus traditional in-person fracture clinic care for adults with acute simple fractures: a protocol for a health economic evaluation within the RECITAL trial

ABSTRACT Introduction Traditional in-person fracture clinics are often overcrowded and inconvenient for patients. Virtual fracture clinics aim to address some of these concerns by improving the efficiency of the orthopaedic service and reducing unnecessary interventions while maintaining safety and quality of care. The RECITAL trial is a non-inferiority randomised controlled trial comparing follow-up care provided at a virtual fracture clinic for people with acute simple fractures to follow-up care provided at an in-person fracture clinic. This study describes the protocol for an economic evaluation of RECITAL where the primary aim is to investigate the cost-effectiveness of a virtual fracture clinic compared with traditional in-person fracture clinic care from a health system perspective. Methods and analysis The RECITAL trial recruited 312 participants with acute simple fractures and randomised them to receive follow-up care provided at a virtual fracture clinic or follow-up care provided at an in-person fracture clinic. We will conduct a within-trial analysis from a health system perspective (primary analysis), as well as a health service, patient and societal perspective. The economic evaluation will estimate the difference in the cost of resource inputs on an intention to treat basis used by participants in the two arms of the trial, allowing comparisons to be made between the in-person and virtual fracture clinics. Data for intervention costs and healthcare utilisation will be collected from trial records, hospital electronic medical records and district performance units. The results of the economic evaluation will be expressed in terms of incremental cost per utility weight gained at 12 weeks and will be plotted on a cost-effectiveness plane. Bootstrapping by resampling will be used to estimate 95% confidence intervals around costs and outcomes, and to calculate the confidence intervals around the incremental cost-effectiveness ratio. A cost-effectiveness acceptability curve (CEAC) will be plotted, which will provide information about the probability that an intervention is cost-effective, given the level of a decision makers willingness to pay for each additional outcome. Ethics and Dissemination The trail was approved by the SLHD Ethics Review Committee (RPAH Zone) (X23-0200 and 2023/ETH01038). The findings will be disseminated through a peer-reviewed journal and conference presentations. Trial registration number The trial was prospectively registered on the Australian New Zealand Clinical Trials Registry (ANZCTR; 12623000934640)

14.
bioRxiv (Bioinfo) 2026-06-11

Integrating Spatially Adjusted Protein Summaries for Survival Prediction in Spatial Proteomics

Recent advances in spatial proteomics, particularly imaging mass cytometry, enable the measurement of protein expression at the single-cell level while preserving a spatial context. Conventional survival analyses, however, typically rely on patient-level averages of protein intensities and therefore overlook spatial heterogeneity and tissue architecture. To address this limitation, we introduce a framework that incorporates spatial information into survival modeling by generating spatially adjusted protein summaries (SAPS). In this approach, cell-level protein intensities within each patient are modeled using spatial spline regression to capture spatial trends. From these models, we extract two complementary features: a spatially adjusted mean expression and a residual variance that reflects cell-to-cell variability unexplained by spatial effects. These summaries are then incorporated into Cox proportional hazards models in combination with clinical covariates. In simulation studies, our proposed framework achieved improved predictive performance compared to other alternative methods. The application of the method to breast cancer imaging mass cytometry data indicate that spatially adjusted summaries may enhance survival prediction and reveal biologically interpretable spatial protein patterns, suggesting high translational potential. This methodology offers an efficient means of translating complex spatial proteomics data into patient-level features, providing both improved survival prediction and new insights into the role of spatial heterogeneity in cancer outcomes.

15.
arXiv (CS.AI) 2026-06-16

Toward Vibe Medicine: A Self-Evolving Multi-Agent Framework for Clinical Decision Support

arXiv:2606.15504v1 Announce Type: new Abstract: In recent years, the advances of large language models and autonomous agents have revolutionized the healthcare field, facilitating diagnosis and improving treatment results. However, most existing AI systems rely on pre-trained knowledge and predefined pipelines, which struggle to learn dynamically from the interactive chat session history that contains patient outcomes and past failures. To address this limitation, we propose VIBEMed, a multi-agent framework with a built-in self-evolution mechanism and architecture-level safety sandbox for robust clinical decision support. The system integrates three specialized agents, including a Clinical Diagnostic Agent (CDA) for hypothesis generation, a Therapeutic Execution Agent (TEA) for treatment planning, and a Clinical Evolution Manager Agent (CEMA) that distills longitudinal clinical feedback into reusable knowledge, transforming multimodal patient information into personalized medical decisions. Through self-evolution mechanism, the framework enables iterative updates across memory, model behavior, and decision strategies, allowing the system to improve over time. Experimental results show that VIBEMed demonstrates superior performance through its evolving mechanism in complex clinical cases, particularly in tasks that require integrated decision-making and longitudinal planning. The framework also supports reliable end-to-end decisions in challenging scenarios such as oncology treatment planning, highlighting its feasibility in real-world clinical contexts. Overall, VIBEMed provides a practical path beyond static AI systems toward adaptive, experience-driven clinical decision support, demonstrating the value of combining multi-agent collaboration with continuous evolution for advancing precision medicine.

16.
arXiv (CS.LG) 2026-06-16

Machine learning enables roughness-driven inverse design of milling processes

arXiv:2606.16032v1 Announce Type: cross Abstract: Interest in applying data-driven approaches in manufacturing has grown significantly, particularly for mapping complex, high-dimensional relationships. The milling process is one area where predictive models can link influential parameters to surface roughness metrics prior to in situ operations. While this approach offers clear advantages, it faces challenges due to limited datasets and robustness issues in inverse design paradigms. To address these challenges, this paper proposes a machine learning (ML)-based framework for the inverse design of the surface milling process, with a focus on surface roughness as the design objective. The framework employs forward training of two ML models, a deep neural network (DNN) and a random forest (RF) ensemble, both developed using a high-fidelity synthetic dataset generated from a computational simulation framework. These trained models are integrated into a Bayesian optimization (BO) procedure to overcome the multiplicity problem arising from the many-to-one mapping inherent in the dataset. The approach identifies top-performing milling process configurations, considering both process and tool parameters, and presents them from the full solution space. The models achieve average relative errors below 5% when compared to reference results, thereby demonstrating the robustness and reliability of the proposed methodology.

17.
arXiv (CS.LG) 2026-06-12

Policy-driven Conformal Prediction for Trustworthy QoT Estimation

arXiv:2606.12501v1 Announce Type: new Abstract: We propose Conformal QoT, a policy-driven framework that combines statistically guaranteed QoT estimation with operational decision policies, enabling reliable lightpath-feasibility predictions under domain shift and improving accuracy from 92\% to 99.6\% on open datasets.

18.
arXiv (CS.CV) 2026-06-16

SceneConductor: 3D Scene Generation from a Single Image with Multi-Agent Orchestration

Generating complete 3D scenes from a single image requires inferring globally consistent geometry, object relationships, and environmental context from inherently ambiguous visual evidence. Despite recent progress in joint layout-and-mesh generation, existing methods often rely on holistic or weakly decomposed pipelines that entangle many factors at once and demand extensive scene-level supervision, limiting their generalization to complex real-world environments. We propose a multi-agent orchestration framework that decomposes single-image 3D scene generation into three structured stages: scene initialization, environment construction, and multi-agent refinement. The initialization stage extracts image-derived object masks, builds object-level 3D representations, and predicts an initial spatial layout to form a coarse 3D scene. The environment-construction stage then leverages this initialization together with point-map geometry to build an environmental scaffold of supporting surfaces, room boundaries, materials, and illumination. Finally, in the refinement stage, a planner agent identifies structural and visual inconsistencies, applies simple corrections directly, and dispatches specialist agents for complex localized revisions that are reintegrated into the global scene. To provide reliable structural initialization while reducing reliance on scene-level annotations, we further introduce a geometry-aware layout predictor supervised by sparse geometric priors derived from point maps. Unlike fully supervised layout generators, the predictor can be trained from segmentation-level data and generalizes robustly to diverse real-world scenes. Extensive experiments on benchmark datasets show that our method consistently outperforms prior approaches in geometric accuracy, spatial consistency, and perceptual realism.

19.
arXiv (CS.AI) 2026-06-16

Proximal Policy Optimization for Amortized Discrete Sampling

arXiv:2606.15793v1 Announce Type: cross Abstract: This paper explores policy gradient algorithms for training stochastic policies to sample from structured discrete probability distributions under the Generative Flow Network (GFlowNet) framework. Building on extensive theoretical connections between GFlowNets and entropy-regularized reinforcement learning, we derive equivalents of standard policy gradient algorithms for training GFlowNets, as well as experimentally explore their various methodological aspects, including baseline training and advantage estimation. Most importantly, our work is the first to derive and successfully apply proximal policy optimization to GFlowNets, showing its improved convergence speed and data efficiency compared to standard GFlowNet training objectives on benchmarks ranging from synthetic energies to molecular graph generation.

20.
arXiv (CS.CV) 2026-06-15

Avatar V: Scaling Video-Reference Avatar Video Generation

Generating avatar videos that are not merely visually similar to a target individual but behaviorally recognizable, faithfully reproducing their talking rhythm, gestural tendencies, and expression dynamics, remains an open challenge. Existing methods predominantly condition on single static images, which provide insufficient identity information and cannot capture dynamic motion traits, while standard pixel-level objectives underserve the perceptually critical facial regions that determine avatar fidelity. We present Avatar V, a production-scale framework that addresses these limitations through video-reference-conditioned identity modeling. Rather than compressing identity into fixed-size embeddings, the model conditions directly on the full token sequence of a reference video, learning to reproduce both static identity attributes (facial geometry, skin texture) and dynamic behavioral patterns (talking rhythm, micro-expressions) through attention over the reference context. We introduce Sparse Reference Attention, an asymmetric mechanism achieving linear-complexity conditioning on arbitrarily long references; a motion representation stream enabling closed-loop talking style transfer; and an identity-aware super-resolution refiner inheriting the full reference conditioning. These are supported by a data engine curating 100M+ training clips from 50M raw videos, and a five-stage training pipeline with flow matching pre-training, personality fine-tuning, two-phase distillation (>10x acceleration), and RLHF alignment, deployed across thousands of GPUs. Avatar V generates 1080p videos of unlimited duration, achieving state-of-the-art identity preservation, lip synchronization, and generation quality on our cross-scene benchmark, consistently outperforming leading systems including Seedance 2.0, Kling O3 Pro, Veo 3.1, and OmniHuman 1.5 in both automated metrics and human evaluation.

21.
arXiv (CS.LG) 2026-06-11

Bergson: An Open Source Library for Data Attribution

arXiv:2606.11660v1 Announce Type: new Abstract: Data attribution is a promising field in interpretability that aims to explain model behavior through the influence of its training data, with applications including debugging undesirable model behavior and training dataset curation. However, significant engineering effort is required to perform it at scale, and many cutting edge techniques lack open-source tooling and support. Bergson is an open source library that aims to enable faster progress in the field by providing a host of techniques that scale to very large language models and pre-training datasets. The library natively supports on-disk gradient stores and multi-node distributed training, and provides quality of life tools for researchers. Finally, we introduce the first open-source implementations of three leading data attribution methods: MAGIC, SOURCE, and TrackStar. The library is available at https://github.com/EleutherAI/bergson .

22.
medRxiv (Medicine) 2026-06-11

The impact of pre-stroke statin use on baseline corrected infarct volume and collateral perfusion

Stroke is a leading cause of disability and mortality worldwide, with ischaemic stroke the most prevalent type. Statins, used for cholesterol management, have demonstrated benefits in reducing stroke risk and improving outcomes in preclinical studies. However, the impact of pre-stroke statin use on stroke outcomes remain inconsistent. In this study, we aim to evaluate whether pre-stroke statin use is associated with greater volume of salvaged tissue and improved cerebral collateral perfusion. A retrospective analysis was conducted using data from 281 patients presenting with acute ischemic stroke to the John Hunter Hospital between May 2015 and May 2020. Patients were grouped based on pre-stroke statin use, and clinical variables, including infarct volume and collateral perfusion, were assessed. The primary outcome was salvage volume derived from baseline perfusion lesion volume minus infarct volume at follow-up. Collateral perfusion was measured by the hypoperfusion volume defined by delay time (DT)>6 seconds divided by the hypoperfusion volume defined by DT >2 seconds. Patients on statins at admission were significantly older and had more comorbidities. No significant association was found between pre-stroke statin use and salvage volume or collateral perfusion after adjusting for covariates. Larger initial infarct core was a significant predictor of salvage volume due to larger salvageable tissue volume at baseline. These findings indicate that pre-morbid statin use is not associated with larger salvage volume or improved cerebral collateral perfusion.

23.
arXiv (CS.LG) 2026-06-12

Exposure Bias as Epistemic Underidentification in Recursive Forecasting

arXiv:2606.12990v1 Announce Type: new Abstract: Recursive multi-step forecasting is usually framed as distribution shift: models are trained on observed histories but deployed on their own predictions. We show this framing is incomplete by proving that, under partial observability or state truncation, recursive rollout is also an epistemic underidentification problem. Even with deterministic latent dynamics, one-step Bayes supervision identifies behavior only on observed contexts and need not identify the deployed recursive predictor once rollout queries self-generated induced states whose correct local targets are not determined by numeric state alone. We formalize this with induced states $Z$ and provenance variables $P$, and derive a decomposition of induced-state error into teacher-forcing/rollout mismatch, representation–class approximation, and provenance information gaps. Empirically, we show that rollout enters a distinct induced-state regime, that fixed induced states define a distinct local corrective task, and that closed-loop gains arise not only from local adaptation but also from changing the induced states visited during rollout. Using a simple binary provenance encoding, provenance-aware correction can further improve performance, though gains are conditional rather than uniform. These results recast exposure bias as reasoning under self-induced epistemic uncertainty.

24.
medRxiv (Medicine) 2026-06-12

Immunologically Optimized Zmp1 Peptides Reveal a Translational Serological Biomarker Platform for Tuberculosis Diagnosis Across Disease Manifestations

Tuberculosis (TB) diagnosis remains challenging, particularly for extrapulmonary TB (EPTB), where invasive sampling, low bacillary burden, and suboptimal sensitivity of nucleic acid-based tests in peripheral specimens hinder timely detection. Here, we report an immunology-driven strategy for biomarker discovery and development of a peptide-based serological assay targeting Mycobacterium tuberculosis zinc metalloprotease-1 (Zmp1). Leveraging fundamental principles of adaptive immunity that antigenic regions containing overlapping B-cell and CD4 T-helper cell epitopes would preferentially generate high antibody titers through linked recognition and cognate T-cell help, we used an immunoinformatics pipeline to identify two nested immunodominant peptide regions within Zmp1 (Mtb-Zp-NT and Mtb-Zp-CT) enriched for overlapping B- and T-cell epitopes. The diagnostic potential of these peptides was evaluated through ELISA-based serological assays. A blinded pilot study (N=137) demonstrated a clear discrimination between active TB and TB-recovered individuals. The assay was subsequently validated in an expanded cohort (N=875) by screening 6,086 individuals, which identified 457 TB-positive cases. The cohort included pulmonary TB (PTB), EPTB, TB-recovered individuals, household contacts, non-specific infections, and healthy controls. Receiver operating characteristic analyses, supported by DeLong and bootstrap comparisons, revealed superior diagnostic performance of the peptide-based assays relative to full-length Zmp1. Mtb-Zp-CT exhibited the highest accuracy (AUC=0.93; specificity >90%), while Mtb-Zp-NT also demonstrated strong discriminatory power (AUC{approx}0.89). These findings establish that the immunologically optimized Zmp1 peptides are highly promising serological biomarkers for TB and EPTB. More broadly, they demonstrate how mechanistically informed epitope selection can accelerate translation of pathogen-specific immune signatures into sensitive, minimally invasive, and potentially point-of-care diagnostic platforms for resource-limited settings.

25.
arXiv (CS.CL) 2026-06-17

Fine-tuning LLMs for Passive Depression Severity Estimation from AI Mental Health Dialogue

Depression is the leading cause of disability worldwide, and early detection of symptom change is essential for timely intervention. Validated instruments such as the Patient Health Questionnaire-9 (PHQ-9) support symptom monitoring at scale, but real-world completion rates are low, introducing response bias and systematic missingness. Passive approaches that infer severity from routinely generated data could close this gap. We address this by predicting PHQ-9 total scores directly from transcripts of conversations between users and an AI mental health application, requiring only conversation text and no additional clinical data. We fine-tune a Qwen3.5-27B backbone with a regression head, augment 3,111 ground-truth labels with pseudolabels generated by a reasoning model (Claude Opus) and iteratively trained intermediate models, for a combined dataset of 6,283 users. On a held-out test set of 842 users, our best model achieves MAE = 2.6, RMSE = 4.0, Pearson r = 0.80, and AUC = 0.91 at the PHQ-9 >= 10 clinical threshold. We also find AUC > 0.87 at every severity threshold from PHQ-9 >= 3 to PHQ-9 >= 24, demonstrating that the model captures depression severity across the full clinical spectrum. This work opens the door to passive, continuous symptom monitoring in AI mental health platforms, without requiring users to complete self-report measures.