Academic Intelligence · Curated Daily

探索全球前沿学术脉络

AcademicHub 汇聚顶级期刊与预印本平台的实时文献。定制您的专属科研雷达,利用大语言模型自动生成交叉领域文献分析简报。

01.
Nature (Science) 2026-06-09

Good recycling starts at home — and benefits the world

作者: 未知作者

New research supports the value of household-level waste separation. But policies must also carefully consider consumer behaviours to maximize the quality of material collected. New research supports the value of household-level waste separation. But policies must also carefully consider consumer behaviours to maximize the quality of material collected.

02.
arXiv (CS.LG) 2026-06-18

Reinforcement Learning for Accelerated Aerodynamic Shape Optimisation

arXiv:2507.17786v2 Announce Type: replace Abstract: We introduce a reinforcement learning (RL) based adaptive optimization algorithm for aerodynamic shape optimization focused on dimensionality reduction. The form in which RL is applied here is that of a surrogate-based, actor-critic policy evaluation MCMC approach allowing for temporal 'freezing' of some of the parameters to be optimized. The goals are to minimize computational effort, and to use the observed optimization results for interpretation of the discovered extrema in terms of their role in achieving the desired flow-field. By a sequence of local optimized parameter changes around intermediate CFD simulations acting as ground truth, it is possible to speed up the global optimization if (a) the local neighbourhoods of the parameters in which the changed parameters must reside are sufficiently large to compete with the grid-sized steps and its large number of simulations, and (b) the estimates of the rewards and costs on these neighbourhoods necessary for a good step-wise parameter adaption are sufficiently accurate. We give an example of a simple fluid-dynamical problem on which the method allows interpretation in the sense of a feature importance scoring.

03.
arXiv (CS.CV) 2026-06-18

Low-Cost Neuromorphic Fall Detection Using Synthetic Event Data and Hybrid SNNs

This work presents the development of hybrid models that integrate spiking neural networks (SNNs) with components of convolutional neural networks (CNNs) to learn from simulated event-based camera data (Dynamic Vision Sensor, DVS) generated from conventional smartphone videos. Aimed primarily at human fall detection, the approach leverages the energy efficiency and spatio-temporal processing capabilities of SNNs by converting video frames into event-based data. The proposed models are evaluated through simulations on multiple datasets, comparing their performance to that of traditional machine learning models. Results demonstrate significant gains in efficiency without sacrificing accuracy, underscoring the potential of combining SNNs and DVS technology for complex tasks in real-world environments.

04.
arXiv (CS.CV) 2026-06-15

VideoWeave: Unlocking Geometric Consistency in Video Generation via Joint Geometry-Video Modeling

Large-scale video diffusion models often fail to preserve 3D structure over time, causing geometric drift and implausible motion under viewpoint changes. Existing methods usually enforce geometric consistency by using explicit geometry reconstructions, such as depth maps, point clouds, or reconstructed 3D structures, to define conditions, supervision, or reward signals, making the generator sensitive to errors from upstream geometry pipelines. We propose VideoWeave, a latent-space post-training framework that uses implicit geometry-model features to constrain the generative distribution, providing a more flexible and non-rigid form of guidance that mitigates the impact of reconstruction errors from geometry models. Specifically, VideoWeave adapts these features into geometry latents and jointly models them with video latents in a shared denoising space, allowing geometry to shape the generative distribution during training. To support this process, we build GeoVid-80K, an 80K-video dataset with paired appearance and geometry representations. Experiments on text-to-video and image-to-video generation show that VideoWeave improves geometric coherence while preserving strong visual quality. VideoWeave project page at https://videoweave.github.io/

05.
arXiv (CS.AI) 2026-06-11

FreeBridge: Variational Schrödinger Bridges for Cellular Transition Dynamics

arXiv:2606.11286v1 Announce Type: cross Abstract: High-content imaging assays quantify cellular responses to chemical and genetic perturbations, yet continuous trajectories of individual cells are unobservable because cells are chemically fixed at acquisition. Perturbation modeling therefore reduces to inferring stochastic transport between control and treated populations observed only as separate marginals. While recent generative models achieve strong end-point alignment, boundary consistency does not determine intermediate evolution: multiple stochastic processes may connect identical marginals while traversing regions unsupported by observed single-cell morphologies. We introduce FreeBridge, a Schrödinger Bridge formulation for single-cell transition modeling under endpoint-only supervision. FreeBridge defines atomic states as instance-segmented single-cell representations, establishing a fixed cellular manifold, and learns stochastic transport constrained within this geometry via empirical latent support regularization. Across BBBC021, RxRx1, and JUMP, FreeBridge maintains competitive or improved endpoint fidelity and mechanism-of-action retention under a unified evaluation protocol; on BBBC021, it further reduces intermediate support violations. These findings highlight the importance of geometric grounding for biologically interpretable perturbation dynamics. Project page: https://y-research-sbu.github.io/FreeBridge/.

06.
arXiv (CS.CV) 2026-06-16

Stepwise Token Selection for Efficient Multimodal Large Language Models

In multimodal large language models (MLLMs), inference cost is largely dominated by the visual token prefix rather than the language backbone, making token reduction a key factor for improving efficiency. Existing approaches typically assign independent importance scores to visual tokens and retain a fixed number of top-ranked tokens, implicitly assuming token independence and a uniform compression ratio across inputs. In this work, we reformulate visual token pruning as a sequential decision-making process. Specifically, we introduce a pointer-style selection mechanism that iteratively chooses informative tokens, conditioning each decision on previously selected ones, and dynamically determines when to stop via a learned termination action. This enables joint optimization of both the selected subset and its size. To enable end-to-end training under standard language modeling objectives, we design a differentiable relaxation based on a variance-preserving noise interpolation scheme, allowing gradients to propagate through the discrete selection process. Extensive experiments on LLaVA-v1.5-7B and Qwen2.5-VL-7B demonstrate that our approach consistently outperforms fixed-ratio baselines across different compression levels. Under aggressive pruning that removes 88.9% of visual tokens, our method preserves 94.6% of the original accuracy while achieving a 1.88x speed-up in prefill latency.

07.
arXiv (quant-ph) 2026-06-17

Fabless Quantum Chip Design and Commercial Production

arXiv:2606.17956v1 Announce Type: new Abstract: This paper proposes a fabless quantum-chip design and production architecture for superconducting quantum computing, centered on the SPICE-Q multiphysics simulation framework. The proposed ecosystem connects process-certified quantum PDKs, parameterized device cells, traceable model cards, SPICE-Q physical modeling languages, unified Q-EDA flows, foundry sign-off rules, cryogenic test feedback, and reusable quantum IP. In this model, design firms do not merely outsource fabrication; they prepare verified tape-outs under standardized process constraints and calibrated physical models. Its economic value lies in reducing repetitive device debugging, process exploration, and low-level layout effort, while its feasibility depends on PDK maturity, foundry yield, cryogenic test throughput, model-prediction accuracy, data-feedback mechanisms, and IP licensing boundaries. We argue that superconducting quantum chips can move from the current largely vertically integrated development model toward a fabless-foundry ecosystem only when hardware design is supported by standardized, verifiable, and reusable software and process interfaces. The required pillars are certified PDKs, PCell-based parameterized design, SPICE-Q cross-physics simulation, end-to-end Q-EDA automation, and a tradable quantum-IP market. By adapting lessons from the classical semiconductor industry to quantum hardware, this framework defines a path toward scalable, manufacturable, and commercially reusable superconducting quantum-chip design.

08.
arXiv (CS.CL) 2026-06-12

Zero-source LLM Hallucination Detection with Human-like Criteria Probing

Large language models (LLMs) often hallucinate by generating factually incorrect or unfaithful content, posing significant risks to their safe use. Detecting such hallucinations is particularly challenging under the zero-source constraint, where no model internals or external references are available, and detection must rely solely on the textual query-answer pair. In this paper, we propose Human-like Criteria Probing for Hallucination Detection (HCPD), a paradigm that emulates the multi-faceted reasoning of human evaluators. Its core is a Human-like Criteria Probing (HCP) mechanism, in which a LLM agent adaptively decomposes its judgment into a weighted set of interpretable criteria and aggregates criterion-specific scores into a final truthfulness measure. To achieve this adaptive capability, we introduce a reward-based alignment scheme using only weak supervision from semantic consistency. At inference, we employ a multi-sampling aggregation strategy to ensure robust decisions while preserving full interpretability. We further provide theoretical analysis supporting the reliability of our approach. Extensive experiments show that HCPD consistently outperforms state-of-the-art baselines, offering an effective and explainable solution for zero-source hallucination detection. Code is available at https://github.com/TRISKEL10N/HCPD.

09.
arXiv (CS.LG) 2026-06-11

NARRAS: Edge-Triggered Distributed Inference for CSI-Based Localization in Vehicular IoT Networks

arXiv:2606.11914v1 Announce Type: cross Abstract: CSI-based localization with spatially distributed antenna arrays exposes a basic resource trade-off. Each array can provide a rich view of the channel, but forwarding observations from all arrays to a fusion center is wasteful when only a few carry useful information, and the shared uplink supports only a limited number of simultaneous transmissions. We let each array decide locally whether its current observation is worth reporting, subject to a budget on the average number of active transmitters. We refer to this abstraction as Edge-Triggered Distributed Inference (ETDI). It captures a broader class of task-oriented communication problems where resource-constrained devices share an access channel for a common inference task. We instantiate ETDI for CSI-based localization, a common scenario in vehicular IoT networks. Spatially distributed remote antenna arrays (RAAs) encode local channel state information (CSI) from user equipment (UE) transmissions into latent features, and the fusion center estimates the UE position from the subset of reported features. We propose NARRAS, a decentralized reporting policy in which each RAA combines a recurrent summary of its recent observations with a memory of the last latent it transmitted. Training controls an explicit activity budget through differentiable activity penalties and validation-calibrated deterministic thresholds, and uses channel-chart regularization to shape the latent geometry. Experiments show that, at comparable uplink activity, NARRAS improves localization accuracy over learned and heuristic sparse-reporting strategies, while dense full-report models remain useful budget-free references. In low-activity regimes, chart regularization further reduces high-percentile localization errors, suggesting that geometry-aware latent representations are more robust under sparse reporting.

10.
arXiv (CS.CV) 2026-06-16

A Multi-Center Benchmark for Abdominal Disease Diagnosis and Report Generation from Non-Contrast CT

Multiphasic contrast-enhanced CT (CECT) is widely used for abdominal lesion characterization, yet it carries inherent risks of contrast-induced nephropathy, escalates acquisition burden, and heavily contributes to radiologist workload. To address these challenges, we introduce a novel multi-center benchmark for multi-organ abdominal disease diagnosis and automated radiology report generation, which learns to synthesize contrast-enhanced findings from single-phase non-contrast CT (NCCT). To support this, we curated a large-scale dataset of paired NCCT-CECT studies and their corresponding contrast-enhanced radiology reports from two centers, partitioned into internal sets and an external validation cohort. Under a unified evaluation protocol, we benchmarked five contemporary deep learning architectures encompassing chest-specific, abdomen-specific, and general-purpose multimodal domains. Extensive experiments demonstrate that NCCT retains diagnostic signals, achieving an average multi-organ AUC of 69.1% on the internal cohort and 63.1% on the external cohort, respectively. By releasing this dataset and standardized benchmark publicly, this study aims to catalyze future research into safer, resource-efficient, and globally accessible contrast-free abdominal imaging workflows. Code is available at: https://github.com/xmed-lab/TriALS-Report.

11.
arXiv (CS.CL) 2026-06-19

EndoCoT: Scaling Endogenous Chain-of-Thought Reasoning in Diffusion Models

Recently, Multimodal Large Language Models (MLLMs) have been widely integrated into diffusion frameworks primarily as text encoders to tackle complex tasks such as spatial reasoning. However, this paradigm suffers from two critical limitations: (i) MLLMs text encoder exhibits insufficient reasoning depth. Single-step encoding fails to activate the Chain-of-Thought process, which is essential for MLLMs to provide accurate guidance for complex tasks. (ii) The guidance remains invariant during the decoding process. Invariant guidance during decoding prevents DiT from progressively decomposing complex instructions into actionable denoising steps, even with correct MLLM encodings. To this end, we propose Endogenous Chain-of-Thought (EndoCoT), a novel framework that first activates MLLMs' reasoning potential by iteratively refining latent thought states through an iterative thought guidance module, and then bridges these states to the DiT's denoising process. Second, a terminal thought grounding module is applied to ensure the reasoning trajectory remains grounded in textual supervision by aligning the final state with ground-truth answers. With these two components, the MLLM text encoder delivers meticulously reasoned guidance, enabling the DiT to execute it progressively and ultimately solve complex tasks in a step-by-step manner. Extensive evaluations across diverse benchmarks (e.g., Maze, TSP, VSP, and Sudoku) achieve an average accuracy of 92.1%, outperforming the strongest baseline by 8.3 percentage points. The code and dataset are publicly available at https://internlm.github.io/EndoCoT/.

12.
arXiv (CS.LG) 2026-06-12

Central Limit Theorems for Stochastic Gradient Descent Quantile Estimators

arXiv:2503.02178v3 Announce Type: replace-cross Abstract: This paper develops asymptotic theory for quantile estimation via stochastic gradient descent (SGD) with a constant learning rate. The quantile loss function is neither smooth nor strongly convex. Beyond conventional perspectives and techniques, we view quantile SGD iteration as an irreducible, periodic, and positive recurrent Markov chain, which cyclically converges to its unique stationary distribution regardless of the arbitrarily fixed initialization. To derive the exact form of the stationary distribution, we analyze the structure of its characteristic function by exploiting the stationary equation. We also derive tight bounds for its moment generating function (MGF) and tail probabilities. Synthesizing the aforementioned approaches, we prove that the centered and standardized stationary distribution converges to a Gaussian distribution as the learning rate $\eta\rightarrow0$. This finding provides the first central limit theorem (CLT)-type theoretical guarantees for the quantile SGD estimator with constant learning rates. We further propose a recursive algorithm to construct confidence intervals of the estimators with statistical guarantees. Numerical studies demonstrate the effective finite-sample performance of the online estimator and inference procedure. The theoretical tools developed in this study are of independent interest for investigating general SGD algorithms formulated as Markov chains, particularly in non-strongly convex and non-smooth settings.

13.
arXiv (math.PR) 2026-06-18

On a class of reflected McKean-Vlasov Stochastic Differential Equations with jumps

arXiv:2606.18433v1 Announce Type: new Abstract: This paper investigates a class of reflected McKean-Vlasov Stochastic Differential Equations driven by both Brownian motion and a compensated Poisson random measure. We establish the existence and uniqueness of solutions and provide moments estimates for the state processes.

14.
arXiv (CS.CV) 2026-06-16

Latent Space Reinforcement Learning for Inverse Material Estimation in Food Fracture Simulation

Realistic visual simulation of food manipulation requires accurate material parameters, yet these are difficult to measure directly and vary across the heterogeneous regions of a single food item. We address the inverse problem of estimating material parameters from a target description of fracture behavior in a non-differentiable continuum damage mechanics simulator. Using orange peeling as a test case, we train a neural surrogate on 2,000 forward simulations and compare Covariance Matrix Adaptation Evolution Strategy (CMA-ES, a gradient-free evolutionary optimizer) with Proximal Policy Optimization (PPO, a reinforcement learning algorithm) across the original 9-dimensional parameter space and two learned 4-dimensional latent representations. Since different oranges have different material properties, a practical inverse system must handle arbitrary targets without retraining. We train a goal-conditioned PPO policy that learns a general inverse mapping: given any target description of peeling behavior, the policy produces a material parameter estimate in a single forward pass (8 surrogate evaluations, approximately 10ms). Operating in a normalizing flow latent space with a shared surrogate evaluator, the goal-conditioned policy achieves 0.642 actual recovery when validated through the simulator, outperforming the original parameter space by 23%. A warm-start extension that initializes CMA-ES refinement from the policy's output further improves recovery to 0.828 with 540 evaluations. These findings provide a practical framework for inverse food physics and lay groundwork for vision-driven material identification from video observations of food manipulation.

15.
medRxiv (Medicine) 2026-06-15

Quality Improvement Based Implementation and Evaluation of a Decision Aid for Patients with Nephrolithiasis

Introduction Patients with nephrolithiasis face challenges in making a high-quality, preference sensitive decision. Our prior work established feasibility and patient acceptance of a software-based decision aid (DA). The objectives for this study were to identify implementation strategies for the DA in routine care and determine whether DA implementation enhances decisional quality for patients. Methods New nephrolithiasis patients were recruited from the institution Medical Center from June 2018 to April 2024 to receive a software-based pre-visit DA that measured care preferences and used decision analysis to rank treatments. The RE-AIM framework and Plan-Do-Study-Act (PDSA) cycles were used to improve implementation outcomes. Patients completed survey instruments evaluating decisional conflict, shared decision-making, care satisfaction, and treatment choice following their provider visit. These metrics were compared in the DA cohort (n=81) to those in a usual care cohort (n=78) with Wilcoxon rank-sum and Chi-square (or Fishers exact) tests. Results Implementation data revealed sustained reach and progressive improvement in fidelity. The DA cohort reported higher decisional quality relative to controls (p=0.003) and reported greater support/advice to make a choice (p=0.005). The DA cohort more often discussed options with their doctor (87.5% vs 69.2%, p=0.005) and were more likely to be promoters of their provider (p

16.
arXiv (CS.CV) 2026-06-11

Corpus Augmentation for Sign Language Translation via LLM-Guided Video Stitching

Sign language translation (SLT) converts sign language video into spoken language text and holds significant promise for improving accessibility and enabling communication between signing and non-signing communities. While large weakly-aligned datasets have enabled pre-training at scale and gloss-free methods have reduced reliance on expert annotation, high-quality parallel sign video-text pairs for fine-tuning remain scarce, limiting generalisation on long-tail vocabulary and unseen constructions. We propose a corpus augmentation approach that requires no additional human annotation, external sign-language video corpora, or generative video models, relying only on the existing gloss-annotated training corpus and an LLM for sentence generation: per-gloss clips are extracted from training videos via CTC forced-alignment, novel gloss-sentence pairs are generated by a corpus-anchored LLM, and synthetic sequences are assembled through random sentence sampling and clip assignment. The resulting synthetic RGB video-text pairs are architecture-agnostic at the downstream training stage and can be consumed directly by RGB-based SLT models, or converted into pose or feature representations by pipelines that derive such inputs from video. Sincan et al. re-evaluated five recent gloss-free methods under strictly identical conditions; the largest verified gain over the GFSLT-VLP baseline was only 0.98 BLEU-4. Our augmentation, applied within the same framework, achieves +2.92 BLEU-4 without any change to architecture or training protocol. We further identify that synthetic data harms vision-language pretraining despite improving its objectives, and that optimising clip transitions for visual smoothness is counter-productive under L2-based criteria; we propose that abrupt boundaries may act as a form of implicit regularisation. Code is available at https://github.com/robizso/slt-datagen.

17.
arXiv (CS.CV) 2026-06-17

Visual Retrieval-Augmented Generation for Silhouette-Guided Animal Art

Generative AI has advanced the ability to render photorealistic or artistic images, yet it remains limited in a key aspect of human creativity: interpreting ambiguous shapes. This phenomenon, rooted in pareidolia, allows humans to perceive meaningful forms in random patterns such as clouds, stones, or leaves. To computationally replicate this imaginative process, we introduce Visual Retrieval-Augmented Generation (Visual-RAG), a framework that generates animal art directly from natural silhouettes. Our method retrieves structurally similar animal shapes from a curated corpus of 28,586 high-quality silhouettes and uses them as reference exemplars to guide diffusion-based generation with ControlNet and IP-Adapter. Ablation studies confirm that shape Context with RANSAC provides the most accurate alignment, while removing shape standardization reduces the inlier ratio to just 13.4\%, underscoring the importance of structural fidelity in Visual-RAG. A user study with 12 participants evaluated the outputs in terms of aesthetics, silhouette fidelity, and overall impression. Results reveal that while Visual-RAG provides plausible interpretations, challenges remain in achieving high perceptual impact. This work lays the foundation for computational pareidolia, showing how machines can contribute to the early stages of imaginative discovery.

18.
arXiv (CS.CV) 2026-06-15

SMART: Scalable Mesh-free Aerodynamic Simulations from Raw Geometries using a Transformer-based Surrogate Model

Machine learning-based surrogate models have emerged as more efficient alternatives to numerical solvers for physical simulations over complex geometries, such as car bodies. Many existing models incorporate the simulation mesh as an additional input, thereby reducing prediction errors. However, generating a simulation mesh for new geometries is computationally costly. In contrast, mesh-free methods, which do not rely on the simulation mesh, typically incur higher errors. Motivated by these considerations, we introduce SMART, a neural surrogate model that predicts physical quantities at arbitrary query locations using only a point-cloud representation of the geometry, without requiring access to the simulation mesh. The geometry and simulation parameters are encoded into a shared latent space that captures both structural and parametric characteristics of the physical field. A physics decoder then attends to the encoder's intermediate latent representations to map spatial queries to physical quantities. Through this cross-layer interaction, the model jointly updates latent geometric features and the evolving physical field. Extensive experiments show that SMART is competitive with and often outperforms existing methods that rely on the simulation mesh as input, demonstrating its capabilities for industry-level simulations.

19.
arXiv (CS.AI) 2026-06-15

AgentCyberRange: Benchmarking Frontier AI Systems in Realistic Cyber Ranges

arXiv:2606.14295v1 Announce Type: cross Abstract: Frontier AI systems are increasingly capable of cybersecurity tasks, including codebase inspection, vulnerability detection, and exploitation. However, evaluating their offensive capabilities remains constrained by limited access to open, reproducible, multi-host cyber ranges. Existing public benchmarks capture isolated skills such as CTF solving, vulnerability reproduction, and exploit generation, but often abstract away realistic intrusion workflows: discovering exposed services, gaining a foothold, collecting internal information, and expanding compromise across hosts. This gap makes it difficult to observe emerging risks early, because frontier AI systems are rarely evaluated under realistic attack conditions. We introduce AgentCyberRange, the first open, multi-range infrastructure for measuring autonomous cyber attack capability in realistic cyber ranges. It combines 110 vulnerabilities across 15 real web applications and 8 enterprise-like cyber ranges with 156 internal hosts, plus Cage, a toolchain for execution, orchestration, result collection, and verification. The benchmark covers two core stages: web exploitation, where agents explore exposed applications and validate vulnerabilities, and post exploitation, where agents turn an initial foothold into broader internal compromise. We evaluate six frontier AI systems under matched prompts and budgets. GPT-5.5 with Codex performs best, solving 16.1% of web exploitation tasks and 31.7% of post-exploitation tasks; with more concrete hints, these rates increase to 33.0% and 46.3%. We also observe out-of-benchmark findings, including unknown vulnerabilities in popular projects, and payload mutation that bypasses host defenses. These results show that open cyber-range evaluation is necessary for observing emerging offensive capabilities under realistic and reproducible conditions.

20.
arXiv (CS.AI) 2026-06-17

FllumaOne: A Code-Native Multimodal CAD Dataset with Executable Programs and Kernel-Validated Feature Histories

作者:

arXiv:2606.17696v1 Announce Type: new Abstract: Parametric computer-aided design records both final geometry and the ordered construction history that determines how a part can be edited. Datasets for editable CAD research should therefore expose modeling operations, parameters, and feature dependencies together with validated geometry. We introduce FllumaOne, a code-native multimodal CAD dataset whose models are generated by executable Python programs in Flluma, a Qt/C++ OpenCASCADE-based CAD system. Each sample aligns its program with a structured feature tree, a training-oriented intermediate representation, STEP geometry, a surface point cloud, natural-language descriptions, metadata, and eight canonical visible-edge renderings. The primary release, FllumaOne-100K, contains 100,000 accepted samples across four template-level complexity regimes. Programs are executed and retained only after kernel geometry, solid validity, and export checks; release reports also record modality completeness and split-level duplicate tests. A Qwen2.5-Coder-1.5B LoRA baseline trained on 80,000 samples achieves 99.98% Python syntax validity, 99.97% Flluma build success, and 99.14% STEP-export validity on the held-out 10,000-sample test split. For the 9,909 predictions converted to surface point clouds, the mean normalized Chamfer Distance is 0.002124. The dataset supports conditioned CAD reconstruction, executable program synthesis, feature-tree prediction, B-Rep analysis, retrieval, design completion, and editable reverse engineering.

21.
arXiv (CS.AI) 2026-06-17

SkillJect: Effectively Automating Skill-Based Prompt Injection for Skill-Enabled Agents

arXiv:2602.14211v3 Announce Type: replace-cross Abstract: Agent skills extend LLM agents with task-specific instructions, executable scripts, and auxiliary resources, improving reusability but creating a new supply-chain attack surface. A malicious or compromised skill can be repeatedly loaded as trusted guidance and steer downstream tool use. Existing skill-based prompt-injection attacks are often manual and brittle, because explicit malicious instructions are rejected or ignored when they are not aligned with the original workflow. We propose SkillJect, the first automated framework for generating poisoned skills against skill-enabled agent systems. SkillJect uses two coordinated channels. In the artifact channel, it hides the payload inside an auxiliary helper script. In the instruction channel, it rewrites SKILL.md with a front-loaded inducement strategy, placing injected content at the beginning and framing the helper script as a mandatory prerequisite or initialization step. The rewritten instruction explicitly references the helper-script path and provides an executable example command, making the helper appear to be a legitimate setup step before normal skill operations. SkillJect further adopts a closed-loop multi-agent process to improve attack effectiveness. An Attack Agent generates poisoned skills, a Victim Agent executes downstream tasks with the poisoned skill, and an Evaluate Agent inspects execution traces to determine whether the hidden payload was executed. The Attack Agent then uses this feedback to diagnose failure causes and rewrite SKILL.md, while keeping the payload fixed. Experiments across skill-enabled platforms, backend LLMs, and attack categories show that SkillJect substantially outperforms naive direct injection and prior manual skill-injection attacks, highlighting poisoned skills as a persistent threat in reusable skill ecosystems.

22.
arXiv (CS.AI) 2026-06-12

DCD: Domain-Oriented Design for Controlled Retrieval-Augmented Generation

arXiv:2604.07590v2 Announce Type: replace-cross Abstract: Retrieval-Augmented Generation (RAG) is widely used to ground large language models in external knowledge sources. However, when applied to heterogeneous corpora and multi-step queries, Naive RAG pipelines often degrade in quality due to flat knowledge representations and the absence of explicit workflows. In this work, we introduce DCD (Domain-Collection-Document), a domain-oriented design to structure knowledge and control query processing in RAG systems without modifying the underlying language model. The proposed approach relies on a hierarchical decomposition of the information space and multi-stage routing based on structured model outputs, enabling progressive restriction of both retrieval and generation scopes. The architecture is complemented by smart chunking, hybrid retrieval, and integrated validation and generation guardrail mechanisms. We describe the DCD architecture and workflow and discuss evaluation results on synthetic evaluation dataset, highlighting their impact on robustness, factual accuracy, and answer relevance in applied RAG scenarios.

23.
arXiv (CS.AI) 2026-06-16

Phys-JEPA: Physics-Informed Latent World Models for Multivariate Time-Series Forecasting

arXiv:2606.16076v1 Announce Type: cross Abstract: Multivariate forecasting in physical systems requires models that predict coupled temporal variables while preserving meaningful state evolution. Deep forecasters can fit temporal correlations, and physics-informed models can regularize predictions with scientific constraints, but these directions are often connected only at the decoded-output level. As a result, the hidden predictive state that generates future trajectories may remain statistically useful but physically unstructured. We introduce Phys-JEPA, a physics-informed joint-embedding predictive architecture for multivariate time-series forecasting. Phys-JEPA learns a latent world model in which predictive states are decomposed into physical and residual components, and physical consistency is imposed directly on latent states and latent transitions rather than only on decoded forecasts. This formulation uses known physical variables to organize the representation space while retaining residual capacity for unresolved dynamics. On Jena Climate 2009–2016, Phys-JEPA reduces aggregate MSE from 0.12482 to 0.12273 and temperature MSE from 0.01892 to 0.01831 at H=24. On Traffic, full Phys-JEPA improves aggregate MSE over the supervised baseline across all tested horizons, reducing H=192 MSE from 0.800784 to 0.773873. On Electricity, the best variant depends on horizon: static latent consistency is strongest at H=24 and H=48, while full Phys-JEPA gives the best aggregate and target-variable MSE at H=192. These initial results suggest that moving physics-informed learning from output space to latent predictive state space is a promising direction for interpretable temporal world models.

24.
arXiv (CS.LG) 2026-06-12

DiffCoord: Differentiable Coordination for Distributed Multi-Agent Trajectory Optimization

arXiv:2509.01630v3 Announce Type: replace Abstract: Integrating the Alternating Direction Method of Multipliers (ADMM) with Differential Dynamic Programming (DDP) provides a scalable framework for distributed multi-agent trajectory optimization. In practice, ADMM is typically truncated for computational efficiency, tightly coupling parameters that would otherwise separately govern coordination quality and task performance. In this paper, we propose Differentiable Coordination (DiffCoord), a unified framework that jointly meta-learns these coupled parameters for the truncated ADMM-DDP pipeline. These parameters are generated by agent-wise neural networks for task adaptation, and the same networks are shared among isomorphic agents to enable scalability to varying agent counts. We achieve efficient meta-learning by differentiating the ADMM-DDP pipeline end-to-end. Notably, this yields an auxiliary ADMM-LQR distributed gradient solver that computes and coordinates meta-gradients with respect to these parameters. This solver inherits the computational structure of the pipeline, enabling reuse of key computation results and efficient parallelization over agents and along trajectory horizons. We validate DiffCoord through numerical and physical experiments on a cooperative aerial transport system, where it reconfigures quadrotor formations for safe 6-DoF load manipulation in tight spaces. It adapts robustly to varying team sizes and load dynamics, while reducing per-agent gradient computation time by up to 70% compared with state-of-the-art trajectory-gradient methods.

25.
arXiv (CS.LG) 2026-06-11

HAMNO: A Hierarchical Adaptive Multi-scale Neural Operator with Physics-Informed Learning for Dynamical Systems

arXiv:2606.11963v1 Announce Type: new Abstract: Neural operators provide a powerful framework for learning solution mappings of partial differential equations directly in function space. However, many existing architectures still struggle to represent nonlinear time-dependent systems that involve multi-scale structures, long-range interactions, and stable long-time evolution. In this work, we introduce the Hierarchical Adaptive Multi-scale Neural Operator (HAMNO), a neural-operator architecture that combines local convolutional representations, global spectral operators, and hierarchical encoder-decoder processing. The central component of HAMNO is a data-dependent gating mechanism that adaptively balances local and global information at each spatial location, allowing the model to resolve fine-scale features while preserving long-range dependencies. We further develop a physics-informed extension, PI-HAMNO, based on a multi-objective loss strategy that combines data fitting with strong- and weak-form physics constraints. The strong-form term penalizes the domain-integrated squared PDE residual in physical coordinates, while the weak-form term is constructed by multiplying the governing residual by finite-element test functions and evaluating the resulting element integrals using centroid-based tetrahedral quadrature. The framework is evaluated on non-periodic Allen-Cahn (AC), Cahn-Hilliard (CH), and Swift-Hohenberg (SH) equations defined on cubic domains. Across long-horizon rollout, data-limited training, out-of-distribution initial-condition shifts, and random-seed variations, HAMNO improves predictive accuracy over standard neural-operator baselines, while PI-HAMNO further enhances stability, physical consistency, and data efficiency. The implementation is publicly available at https://github.com/MBamdad/HAMNO .